4
Digital Vision Network (DVN) 100-NET Series Product Bulletin 1 Introduction The Digital Vision Network is a suite of digital recording hardware and software products designed to enhance the capabilities of the P2000 security management system. The DVN 100-NET is a stand-alone, non-PC based, fully embedded video codec capable of encoding and decoding video and audio from an analog video/audio source in real time. Features and Benefits View Analog Camera Video over TCP/IP Networks – The DVN 100-NET converts analog video to digital video for viewing over a Local Area Network (LAN), Wide Area Network (WAN), or the Internet, depending on your network configuration. The DVN 100-NET is compatible with any analog camera. Control Pan-Tilt-Zoom (PTZ) Cameras – The DVN 100-NET provides PTZ camera control via an RS-485 interface. PTZ controls are exceptionally responsive with virtually no latency, regardless of the available bandwidth. PTZ-capable cameras can be controlled from any network-connected workstation. Easy, intuitive control of movement is available with the PTZ graphic control panel. The following PTZ camera protocols are currently supported: Sensormatic™ SpeedDome/DeltaDome Bosch® Autodome 1 Panasonic® (Conventional and Extended) (Model WV-NS202A) Star Micronics™ Pelco® (D-Protocol & P-Protocol) Kalatel® Cyberdome 2 Figure 1: DVN 100-NET Vicon™ JVC® TK-C67x Series Alec Dragon Samsung® VCL (VCLTP Protocol) Ernitec (ERNA Protocol) Vision 360 Max-Pro Hitachi® SpeedDome CBC® Dome Protocol Sanyo® (SSP Protocol) Light and Compact – The DVN 100-NET’s small size and light weight are beneficial for storing, transporting, and installing the device. Audio Input and Output Capability – The stereo channel audio input and output feature allows you to listen to encoded or decoded audio. Set up a microphone in the surveillance area to listen, not just observe, what is occurring. Power Over Ethernet (POE) Compatible – Power the unit using the 12 VDC power supply or through its Ethernet port using a POE switch/hub. 1. Bi-phase convertor (Bosch part number LTC8782/x0-10) required for RS485. No extra hardware required for RS232. 2. Kalatel KTD-312 converter required for RS232. Digital Vision Network (DVN) 100-NET Series Product Bulletin Code No. LIT-12011076 Software Release 2.9 Issued September 18, 2009 Supersedes August 10, 2009

Digital Vision Network DVN 100-NET Series Product Bulletin

Embed Size (px)

Citation preview

Digital Vision Network (DVN) 100-NET SeriesProduct Bulletin

Code No. LIT-12011076Software Release 2.9

Issued September 18, 2009Supersedes August 10, 2009

IntroductionThe Digital Vision Network is a suite of digital recording hardware and software products designed to enhance the capabilities of the P2000 security management system.

The DVN 100-NET is a stand-alone, non-PC based, fully embedded video codec capable of encoding and decoding video and audio from an analog video/audio source in real time.

Features and Benefits• View Analog Camera Video over TCP/IP

Networks – The DVN 100-NET converts analog video to digital video for viewing over a Local Area Network (LAN), Wide Area Network (WAN), or the Internet, depending on your network configuration. The DVN 100-NET is compatible with any analog camera.

• Control Pan-Tilt-Zoom (PTZ) Cameras – The DVN 100-NET provides PTZ camera control via an RS-485 interface. PTZ controls are exceptionally responsive with virtually no latency, regardless of the available bandwidth. PTZ-capable cameras can be controlled from any network-connected workstation. Easy, intuitive control of movement is available with the PTZ graphic control panel. The following PTZ camera protocols are currently supported:

• Sensormatic™ SpeedDome/DeltaDome

• Bosch® Autodome1

• Panasonic® (Conventional and Extended) (Model WV-NS202A)

• Star Micronics™

• Pelco® (D-Protocol & P-Protocol)

• Kalatel® Cyberdome2

Figure 1: DVN 100-NET

• Vicon™

• JVC® TK-C67x Series

• Alec Dragon

• Samsung®

• VCL (VCLTP Protocol)

• Ernitec (ERNA Protocol)

• Vision 360

• Max-Pro

• Hitachi® SpeedDome

• CBC® Dome Protocol

• Sanyo® (SSP Protocol)

• Light and Compact – The DVN 100-NET’s small size and light weight are beneficial for storing, transporting, and installing the device.

• Audio Input and Output Capability – The stereo channel audio input and output feature allows you to listen to encoded or decoded audio. Set up a microphone in the surveillance area to listen, not just observe, what is occurring.

• Power Over Ethernet (POE) Compatible – Power the unit using the 12 VDC power supply or through its Ethernet port using a POE switch/hub.1. Bi-phase convertor (Bosch part number LTC8782/x0-10)

required for RS485. No extra hardware required for RS232.

2. Kalatel KTD-312 converter required for RS232.

Digital Vision Network (DVN) 100-NET Series Product Bulletin 1

• High Quality Video Images – The DVN 100-NET uses MPEG4 compression technology to provide up to 30 Images Per Second (IPS) for the ultimate in crisp, clear, high resolution, full-frame images. Image resolution consists of 720x576 pixels (PAL) or 720x480 pixels (NTSC), and both image compression and image resolution can be adjusted.

• Alarm Input and Relay Output – Use the alarm input and auxiliary relay output to integrate I/O devices with the DVN 100-NET. The alarm input can be connected to an input device, such as a motion detector or Passive Infrared Detector (PIR), and can be monitored using the VisionPocket and SiteManager client software applications. When the input device triggers an alarm, VisionPocket and SiteManager can detect it in real-time, notify the user, and respond accordingly (trigger an auxiliary relay output, such as sounding an alarm or turning on a light).

• Quad View Spot Monitor Output – The Quad View feature enables any DVN 100-NET in decoder mode to display a view of up to four MPEG4 cameras from a DVN 5000 or other DVN 100-NET server (in encoder mode) on a single spot monitor.

• Integrate with a DVN 5000 for Additional Features – The DVN 100-NET can be combined with the powerful DVN 5000 Series platform for video/audio recording and playback, alarm and auxiliary handling, and intelligent motion detection.

SpecificationsTable 1 lists technical specifications of the DVN 100-NET.Table 1: DVN 100-NET SpecificationsSpecification Encoder Mode Decoder ModeVideo Input 1 N/A

Loopthrough Yes N/A

Video Output N/A 1

Audio Input 1 N/A

Audio Output N/A 1

Simultaneous Encoders 4 N/A

Simultaneous Decoders N/A 4

Compression Algorithm MPEG4 MPEG4 / ENPACTA / WAVELET

Supported Resolutions (PAL/NTSC) 720x576/720x480, 720x288/720x240, 352x288/352x240, 176x144/176x120

720x576/720x480, 720x288/720x240, 704x576/704x480, 704x288/704x240, 352x288/352x240, 176x144/176x120

Web Server Integrated Integrated

Dome Control RS-485 N/A

Ethernet 10/100 Mbit 10/100 Mbit

Power over Ethernet (POE) Compliant

Yes Yes

Power Supply 12 VDC ± 5% / POE 12 VDC ± 5% / POE

Power Consumption 4 W 4 W

Operating Temperature 41 to 131°F (5 to 55°C) 41 to 131°F (5 to 55°C)

Relative Humidity 10 to 85%, non-condensing 10 to 85%, non-condensing

Weight 0.5 Kg (1.1 lb) 0.5 Kg (1.1 lb)

Dimensions 90W x 120D x 35H mm3.5W x 4.7D x 1.4 inches

90W x 120D x 35H mm3.5W x 4.7D x 1.4 inches

Digital Vision Network (DVN) 100-NET Series Product Bulletin2

System ArchitectureFigure 2 illustrates the DVN 100-NET system architecture.

Figure 2: DVN 100-NET System Architecture

Supported Client SoftwareThe DVN 100-NET supports the following client software:

• VisionWeb

• VisionPocket

• SiteManager

Figure 3: VisionWeb Client Software

Monitor(Loop)

DVN 100-NET(Encoder Mode)

DVN 100-NET(Encoder Mode)

DVN 100-NET(Decoder Mode)

Clients

INTERNET

LAN

WAN

Router

Client

Client

Camera

Client

Router

Router

Monitor

Camera

DVN 5000

DVN 5000

Monitor(Loop)

MicrophoneAlarm

Input Device

Speaker

Digital Vision Network (DVN) 100-NET Series Product Bulletin 3

Ordering Information

Compatible Software

Related Documentation• DVN 100-NET Installation and Operation Manual

• DVN 100-NET Quick Installation Guide

• DVN 100-NET Catalog Page

Table 2: Ordering InformationPart Number DescriptionDVN100-NET DVN 100-NET with 12 VDC power supply

Table 3: Compatible SoftwarePart Number DescriptionDVN-SW-SMGR1 Full TCP/IP Multi-server Client SiteManager software (one client license – required per DVN server)

DVN-SW-SMGR5 Full TCP/IP Multi-server Client SiteManager software (five client license – required per DVN server)

DVN-SW-SMGRUNL Full TCP/IP Multi-server Client SiteManager software (unlimited access licenses – required per DVN server)

VisionWeb Internet Explorer® TCP/IP client (included with purchase)

VisionPocket Software for compatible PDAs (included with purchase)

Published in U.S.A. www.johnsoncontrols.com

Digital Vision Network (DVN) 100-NET Series Product Bulletin4

Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.All other marks herein are the marks of their respective owners. © 2009 Johnson Controls, Inc.

Building Efficiency507 E. Michigan Street, Milwaukee, WI 53202