Embed Size (px)
Citation preview
DIGITAL ON DELAY / INTERVAL TIMERTT-DT48-F2-3DSR
1
Reset
Start Input
Set Point
LED Indications
Pulse Start
Single Set Point
Relay Status
Dip switch setting
Accuracy
• Preset timer, Push wheel setting • 3 digits, 7 segment LED display• 2 C/O output• Size : 1/16 DIN 48X48X110 mm
Main Features
Input Specification
Technical Specification
Output Specifications
Output Contact
Contact Rating
Functional Specifications
Time Ranges
Operating Modes
Counting Direction
Display
Time Range Setting
Down
By Push wheel switch
ON delay / Interval delay
0 - 9.99 sec, 0 - 99.9 sec, 0 - 999 sec, 0 - 99.9 min, 0 - 999 min, 0 - 99.9 hr
± 0.05% of F.S. or 50 msec (Whichever is greater)
Front, Remote, On Power interruption.
For Time Range & Function Selection
DPDT (2 C/O)
5A @ 230V AC / 24 V DC
Supply Voltage
Supply Voltage
Environmental Specifications
Humidity (non - condensing)
Temperature Operating : 0 to 50°C
95% RH
Ip50 for faceplate
Storage : -20 to 75°C
Protection Level
Mounting Panel Mount
Weight 140 gms
0.36” (H), 3- Digit, 7- Segment, Red
85 to 270V AC @50 or 60 Hz
MODEL NUMBER LEGEND
(Note all model that can be represented with the model number legend can necessarily be produced.)
TT 3
F1 2 4 5
TIMING DIAGRAM
DIGITAL ON DELAY / INTERVAL TIMER
2
INDIADelhi: Corporate OfficeD-10, Defence Colony, New Delhi 110024 INDIATel: +91.11.71200900 Fax: +91.11.71200998E-mail: [email protected]
Trinity Touch Pvt. Ltd. Trinity Touch (EUROPE) Ltd.
UKUnit-L, Tyson Courtyard, Weldon South Industrial Estate, Corby, Northants, N N18 8AZ, UKTel: +44 (0) 1536 400 641 Fax: +44 (0) 1536 268 043E-mail: [email protected]
TERMINAL CONNECTIONS
Meaning
Type of Product1 DT Digital Timer
Symbol
4
5
Display Type
Display Type
3-Digit, 7-Segment Display
Single Row Display
3D
SR
3 Function Mode On-Delay / Interval2
2 Housing Size 48X48 Bezel size48
Sr. Article Number
1
Article Description
TT-DT48-F2-3DSR
Pcs/Pkt.
01
DIMENSIONS
Front View with Bezel 110.00 mm Side View Front View without Bezel
011708390
SUPPLYVOLTAGE
RESET
INTERVALN/O CONTACT
ON DELAYN/O CONTACT
START
t = Set delay time
t t t t
