Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
WHAT WILL YOU FORTIFY?
As 3D Printing applications transition from prototyping to end use part manufacturing, material properties are a critical enabling factor. Customers crave the advantages of on-demand manufacturing, yet demand higher performance than current additive platforms can deliver.
BRINGING INNOVATION TO ADDITIVE
Fortify’s solution to this challenge is a breakthrough technology that introduces reinforcing fiber to photopolymer resins during fabrication. Magnetic fields align fibers throughout the build to optimize strength, stiffness, and other properties. This controlled approach to fiber alignment is unprecedented in both 3D printing and traditional composite manufacturing.
KEY APPLICATIONS
DIGITAL COMPOSITE MANUFACTURING (DCM)
Fortify software optimizes fiber alignment based on part load conditions
ADDITIVE MANUFACTURING WITH OPTIMIZED FIBER ALIGNMENT
MOLD INSERTS PRODUCTION PARTS
LEVEL OF STRESS
part load conditionspart load conditionspart load conditionspart load conditionspart load conditionspart load conditionspart load conditionspart load conditionspart load conditionsfiber alignment based on part load conditionsfiber alignment based on part load conditionsfiber alignment based on part load conditionsfiber alignment based on part load conditions
FIBER ALIGNMENTALIGNMENTALIGNMENTALIGNMENT
FIBER FIBER ALIGNMENTALIGNMENT
FIBER FIBER ALIGNMENT
FIBER FIBER ALIGNMENT
FIBER FIBER ALIGNMENT
FIBER FIBER ALIGNMENTALIGNMENTALIGNMENTALIGNMENTALIGNMENTALIGNMENT
material properties are a critical enabling factor. Customers crave the advantages
FIBER ALIGNMENTALIGNMENT
FIBER ALIGNMENTALIGNMENT
FIBER FIBER ALIGNMENT
FIBER FIBER ALIGNMENT
FIBER FIBER ALIGNMENT
FIBER FIBER ALIGNMENTALIGNMENT
FIBER FIBER ALIGNMENT
FIBER FIBER FIBER FIBER ALIGNMENTALIGNMENTALIGNMENTALIGNMENTALIGNMENTALIGNMENTALIGNMENT
FIBER FIBER ALIGNMENTALIGNMENTALIGNMENTALIGNMENTALIGNMENTALIGNMENT
FIBER FIBER ALIGNMENT
FIBER FIBER FIBER FIBER ALIGNMENTALIGNMENT
MAGNETIC FIELD
MATERIAL PROPERTIES
• Strength• Stiffness• Wear Resistance• Thermal and Creep Stability
OPEN MATERIALS FOCUS: Fortify partners with leading global suppliers to source base engineering resins for our reinforcing fibers. As these raw materials improve year over year,
Fortify’s digital composites will continue to enable new applications.
HOW IT WORKS (SEE STEPS BELOW)
SAMPLE MATERIAL PROPERTIES
UTS: 95-150 MpaModulus: 4-9 GpaHDT: 160-280 degrees C
Build Volume: 5"x9"x14"Build Layer: 10-100 micron
28 Damrell Street, B04, Boston, MA 02127
3DFortify.com / [email protected]
1.
6.
2.
5.
3.
4.
WHAT WILL YOU FORTIFY?Discuss your application with our engineering team today.
6.
2.
5.
3.
4.REPEAT CURINGREPEAT CURINGREPEAT CURINGREPEAT CURINGREPEAT CURINGREPEAT CURINGREPEAT CURINGREPEAT CURINGREPEAT CURINGREPEAT CURINGREPEAT CURINGREPEAT CURING REORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETSREORIENT MAGNETS
UNCURED MATERIAL SELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURINGSELECTIVE CURING
PEEL FOR NEXT LAYER
MAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELDMAGNETIC FIELD
Digital Composite Manufacturing (DCM) steps below:
1. A layer of material is supplied to the build area with reinforcement randomly aligned.
2. A magnetic field is applied to align the reinforcing particles.
3. Active voxels are exposed to UV light, curing the reinforcement orientation in those voxels (now shown in red).
4. The magnetic field is shifted to set a new orientation for the reinforcement.
5. Repeat UV exposure step to cure orientation for the next set of voxels (repeat as needed).
6. Build plate adjusts to bring in uncured material matrix for the next print layer.