DieSetCat[1]

8/3/2019 DieSetCat[1]

http://slidepdf.com/reader/full/diesetcat1 1/16



TABLE OF CONTENTS

Introduction................................................................................................................... 2

PLAIN BEARING DIE SETSStandard Die Sets ......................................................................................................... 3Econoline Die Sets ....................................................................................................... 4Economy Die Sets ......................................................................................................... 5Back Post Die Sets ...................................................................................................... 6 & 7Center Post Die Sets .................................................................................................... 8Diagonal Post Die Sets ............................................................................................... 9Four Post Die Sets ....................................................................................................... 10 & 11BALL-BEARING DIE SETSBall-Bearing Die Set Operating Data & Design Selection ......................................... 12

Standard Die Sets ......................................................................................................... 13Two Post Die Sets ......................................................................................................... 14Four Post Die Sets ........................................................................................................ 15

Check our website www.anchorlamina.com for the latesttechnical information.

Anchor Lamina Inc. provides die sets to the metalworking in-dustry throughout Canada, the United States and Europe. Weare proud of the fact that we supply our die sets to the Automo-tive, Metal Stamping, Farm Implement and Home Appliance sec-tors as well as Electronics and Hardware.

Anchor Die Sets constructs standard models in steel or alumi-num and we welcome specials. Anchor can build die sets from4” wide x 4” long to 120” wide x 360” long.

Steel plates are also offered through the Die Set group.



STANDARD DIE SETS

Mild Steel Plate – Stress Relieved upon RequestAlso available in 4140 steel and Aluminum

Lamina Pins & Bronze Plated Clamp Type Bushings

STOCKED FOR PROMPT SHIPMENTPrices available on request – F.O.B. our PlantSales tax extra if applicable

LC

A

1/2 A

B

W

SPECIFY

H

P.H. D.H.

Special thickness can be supplied for an additionalcharge.

Welded shank available, price on request.

SHANKS AVAILABLE11/2 dia. x 2 1/8 (11/4-12 NF)

2 dia. x 27/8

(11/4

-12 NF)21/2 dia. x 2 7/8 (11/2-12 NF)3 dia. x 3 (1 1/2-12 NF)

When Ordering Specify:1. Type Standard2. Dimensions A & B3. Thickness P.H. and D.H.4. Length of Pins5. Size and location of Shank if required6. Bushings if other than standard

S

A B C S W L .H.P .H.D .H niP.aiD

niP.neL thgieW

3 3 331 / 61

41 / 2 51 / 2 1 1 1 / 4 1 1 / 4 3 / 4SPECIFY

WHEN

ORDERI

NG

51

3 4 4 4 5 / 8 65 / 8 1 1 1 / 4 1 1 / 4 3 / 4 02

4 4 4

1 1 / 61

55 / 8 65 / 8 1 1 1 / 4 1 1 / 4 3 / 4 52

4 6 6 6 9 1 1 / 4 1 1 / 2 1 1 / 4 1 04

4 8 8 6 11 1 1 / 4 1 1 / 2 1 1 / 4 1 05

5 5 5 7 8 1 1 / 4 1 1 / 2 1 1 / 4 1 54

5 7 7 7 01 1 1 / 4 1 1 / 2 1 1 / 4 1 555 9 9 7 21 1 1 / 4 1 1 / 2 1 1 / 4 1 56

6 6 6 8 9 1 1 / 4 1 1 / 2 1 1 / 4 1 55

6 8 8 8 11 1 1 / 4 1 1 / 2 1 1 / 4 1 07

6 01 01 8 1 / 4 31 1 / 4 11 / 2 1 3 / 4 1 1 / 2 11 / 4 001

7 7 7 9 1 / 4 01 1 / 4 11 / 4 1 1 / 2 1 1 / 2 11 / 4 57

7 9 9 9 1 / 4 21 1 / 4 11 / 2 1 3 / 4 1 1 / 2 11 / 4 501

8 8 8 01 1 / 4 11 1 / 4 11 / 2 1 3 / 4 1 1 / 2 11 / 4 021

8 01 01 01 1 / 4 31 1 / 4 11 / 2 1 3 / 4 1 1 / 2 11 / 4 521

SNOITACIFICEPSRUOYOTELBALIAVASEZISREHTO

1” Typical



EZIS NIP.aiD

.H.P .H.DTHGIEW

.H.P .H.DTHGIEW

.H.P .H.DTHGIEW

.H.P .H.DTHGIEW

A B 1 1/2 11/2 11/2 2 2 1 1/2 2 2

6

8

11 / 2 051 051

06

051 002

07

002 051

07

002 002

0801 57 09 09 00121 09 501 501 02141 501 021 021 04181 531 061 061 081

8

8

11 / 2 051 051

57

051 002

58

002 051

58

002 002

00101 59 011 011 52121 011 031 031 051

41 031 051 051 57181 071 591 591 022

01

01

11 / 2 051 051

011

051 002

521

002 051

521

002 002

05121 531 551 551 08141 551 081 081 50281 502 532 532 072

2121

11 / 2 051 051061

051 002581

002 051581

002 002012

41 581 512 512 54281 532 572 572 513

4141

11 / 2 051 051012

051 002042

002 051042

002 002572

81 072 013 013 553

F

F

A

B

SPECIFY

H

P.H. D.H.

ECONOLINE DIE SETS

ECONOLINE Die Sets are a high grade com-mercial die set suitable for most precision re-quirements.

ECONOLINE Die Sets are completely as-sembled before shipment.

ECONOLINE Die Sets are equipped withLamina Bronze Plated Press Fit Shoulder Bus-ings complete with grease fittings and steelguide pins hardened and ground.

ECONOLINE Die Sets are torch-cut from PrimePlate and Blanchard ground.

LENGTH OF GUIDE PINS AVAILABLE:

5, 5-1/2, 6, 6-1/2, 7, 7-1/2 or 8” long at no extracharge.

Longer lengths available.

“F” Dimension is 2-1/2” with 1-1/2” diameter pins.

SHANKS AVAILABLE11/2” dia. x 2 1/8 (1-1/4-12 NF)2” dia. x 2 7/8 (1-1/4-12 NF)21/2” dia x 2 7/8 (1-1/2-12 NF)3” dia. x 3 (1-1/2-12 NF)

When ordering specify:1. Type ECONOLINE2. Dimension A & B3. Thickness P.H. and D.H.4. Pin Length5. Size and location of Shank if required

Prices available on request – F.O.B. our plant

Sales tax extra if applicable

!

!

Mild Steel Plate



C

P.H.

D.H.

SPECIFY

A

1/2 A

W

BL

A B C L W .H.P .H.D niP.aiD

niPhtgneL

.xorppAthgieW

4 6 3 1 / 2 8 5 3 / 4 11 / 4 11 / 4 1 SPECIFY

sbl53

6 6 3 1 / 2 8 7 3 / 4 11 / 4 11 / 4 1 sbl54

6 8 5 1 / 2 01 7 3 / 4 11 / 4 11 / 4 1 sbl55

ECONOMY DIE SETS are presently utilized innumerous applications within the Die MakingIndustry.

Lamina Guide Pins...Hardened and ground

Lamina Bronze Plated Busings ...Press Fit Typewith grease fitting

Torch cut from Prime Steel Plate, Blanchardground and bored (not reamed) to produce anaccurate economical Die Set

Length of Guide Pinsavailable:5, 5-1/2, 6, 6-1/2, 7 or 8” longAt no extra chargeLonger lengths available

SHANKS AVAILABLE11/2” dia. x 2 1/8 (1-1/4-12 NF)2” dia. x 2 7/8 (1-1/4-12 NF)

When ordering specify:1. Type Economy2. Dimension A & B3. Pin Length4. Shank diameter if required

ECONOMY DIE SETSMild Steel Plate



!

!



snoisnemiD

P 1 1 1 / 4 11 / 2 13 / 4 2 2 1 / 2 3F 2 2 1 / 4 21 / 2 3 3 1 / 4 33 / 4 41 / 2H 11 / 4 1 1 / 2 11 / 2 11 / 2 1 1 / 2 2 2

B

8 01 21 41 61 81 02 22 42 62 82 03 23

A

6 02 52 03 53 04 54 05 55 06 56 07 57 08

8 52 03 53 04 05 55 06 07 57 08 58 09 59

01 03 53 54 05 06 07 57 58 09 59 001 511 021

2111 / 2"

sniP

05 06 07 08 58 59 001 011 021 031 04141 07 08 58 09 501 021 031 041 051 061

61 58 59 011 021 531 541 551 071 081

8113 / 4 sniP"

011 521 531 541 061 571 581 002

02 531 051 561 571 091 502 512

22 061 571 091 502 022 532

42 091 502 522 042 552

62 022 042 552 572

82

sniP"2

552 572 592

03 092 013

23 533

43

2 1 / 2 sniP"63

83

04

24

44 htiwgnidahsruolocybdepuorgerasezisecapseiD.sretemaidsnipediugdetseggus

elgnisafothgiewetamixorppaehtetacidnisrebmunxoB.kciht"1etalp

64

84

F

F

A

B

SPECIFY

H

P

P.H.

D.H.


BACK-POST DIE SETSType B2


Special Die Sets are manufactured in any sizeor shape to your specifications.



Type B2 Die Sets are made to order and maynot be returned for credit.

!

!

!

When ordering specify:1. Type B22. Dimension A & B3. Thickness P.H. and D.H.4. Pin Diameter and Length5. Size and location of Shank if required6. Bushings if other than standard

!



B

43 63 83 04 24 44 64 84 05 25 45 65 85 06 26 46 66 86 07 27 47 67 87 08 28 48

58 09 59 001 501 511 021 521 031 531 041 541 051 061 071 571 081 581 091 591 002 502 022 032 532 042 6

A

011 511 021 031 531 041 051 551 061 071 571 581 091 591 502 012 512 522 032 532 542 052 072 572 082 092 8

031 041 541 551 561 071 081 581 591 002 012 512 522 032 042 052 552 562 072 082 582 592 513 023 033 043 01

051 061 071 081 581 591 502 512 522 032 042 052 062 072 572 582 592 503 013 023 043 053 063 073 083 21071 081 091 002 012 022 032 042 052 062 072 582 592 503 513 523 533 543 553 563 583 593 504 514 524 41

091 502 512 522 532 052 062 072 082 592 503 513 523 043 053 063 073 583 593 504 034 044 054 064 574 61

012 522 532 052 062 572 582 003 013 523 533 053 063 573 593 504 024 534 544 064 074 584 594 015 81

032 542 062 072 582 003 513 523 043 553 563 083 593 014 034 544 064 574 584 005 515 035 045 555 02

052 562 082 592 013 523 043 553 573 093 504 024 534 054 564 084 594 515 035 545 065 575 095 506 22

072 582 503 023 533 053 573 093 504 024 044 554 074 584 505 025 535 055 075 585 006 516 536 056 42

092 013 523 043 063 573 004 024 534 554 074 094 505 525 045 555 575 095 016 526 546 066 086 62

013 033 543 563 583 004 524 544 564 584 005 025 045 065 575 595 516 036 056 076 096 507 527 82

033 053 073 093 514 534 554 574 594 515 535 555 575 595 516 036 056 076 096 017 037 057 03

553 573 004 024 044 064 084 005 525 545 565 585 506 036 056 076 096 017 537 557 577 597 23

573 004 024 044 564 584 015 035 555 575 595 026 046 566 586 507 037 057 577 597 028 43

024 044 564 094 015 535 065 085 506 036 056 576 007 027 547 077 097 518 048 068 63

564 094 515 045 065 585 016 536 066 586 017 537 067 087 508 038 558 088 83

015 045 565 095 516 046 566 096 517 547 077 597 028 548 078 598 029 04

075 006 526 556 086 017 537 067 097 518 548 078 009 529 559 24

sniP"3526 556 086 017 047 567 597 528 058 088 019 539 569 44

086 017 047 077 008 038 068 588 519 549 579 64

047 077 008 038 068 098 029 559 589 5101 84

Anchor Die Sets are equippedwith Lamina Clamp-Type Bronze-Plated

Shoulder Bushings

BACK-POST DIE SETSType B2, cont.



snoisnemiDP 1 1 1 / 4 1 1 / 2 1 3 / 4 2 2 1 / 2 3

F 2 2 1 / 4 21 / 2 3 3 1 / 4 3 3 / 4 4 1 / 2H 1 1 / 4 11 / 2 1 1 / 2 1 1 / 2 11 / 2 2 2

B

8 01 21 41 61 81 02 22 42 62 82 03 23

A

6 02 52 03 03 53 04 54 05 05 55 06 06 56

8 03 53 04 54 05 55 06 56 07 57 08 58 58

01 54 05 55 06 07 57 08 58 09 001 501 011

21 11

/2 dna" 06 07 57 08 09 59 501 511 021 521 53141 1 3/4 sniP" 08 09 59 501 011 521 031 041 051 061

61 001 011 521 031 041 051 561 571 081

81 1 3/4 dna" 521 041 051 061 571 581 591 502

02 sniP"2 551 561 081 591 502 512 032

22 581 002 012 522 042 052

42 512 032 542 062 572

62 2&"2 1/2 sniP" 052 562 082 592

82 582 503 023

03 523 043

23 57343

63

83

04

24 gnidahsruolocybdepuorgerasezisecapseiD.sretemaidsnipediugdetseggushtiw

afothgiewetamixorppaehtetacidnisrebmunxoB.kciht""1etalpelgnis

44

64

84

CENTER-POST DIE SETSType C2


1-1/4” & 1-1/2” Pins

When ordering specify:1. Type C2 or D22. Dimension A & B3. Thickness P.H. and D.H.4. Pin Diameter and Length5. Size and location of Shank if required6. Bushings if other than standard

A

B F

D D+

Between Pins

SPECIFY

H

P

P.H.

D.H.

CENTER PINS , Type C2

DIAGONAL PINS , Type D2

A

F

F

D

D+

BBetween Pins

SPECIFY

H

P

P.H.

D.H.



B

43 63 83 04 24 44 64 84 05 25 45 65 85 06 26 46 66 86 07 27 47 67

07 07 57 08 58 09 09 59 001 001 501 011 511 511 021 251 031 031 531 041 041 541 6

A

59 001 501 011 511 511 021 521 031 041 041 541 051 551 061 561 071 571 081 581 091 591 8

021 521 031 531 541 051 551 061 561 071 081 581 091 51 002 012 512 022 522 032 532 542 01

541 051 061 561 071 081 581 591 002 502 512 022 032 532 042 052 552 562 072 572 582 092 21071 571 581 091 002 012 512 522 532 042 052 062 562 572 582 092 003 503 513 523 533 41

091 002 012 022 032 042 052 552 562 572 582 592 503 513 523 033 043 053 063 073 583 61

512 522 532 542 062 072 082 092 003 013 023 033 046 553 073 083 093 004 014 524 534 81

042 052 562 572 582 003 013 023 043 553 563 573 093 004 014 524 534 544 064 074 02

562 572 092 003 513 033 053 063 573 093 004 514 524 044 054 564 084 094 505 515 22

092 003 513 033 543 063 083 593 014 524 534 054 564 084 594 015 025 535 055 565 42

013 523 043 063 573 093 514 034 544 064 574 094 505 025 535 055 565 085 595 016 62

533 053 073 583 004 024 544 064 574 594 015 525 545 065 575 095 016 526 046 82

063 573 593 514 044 064 574 594 015 035 545 565 085 006 516 536 056 076 586 03

593 514 534 054 074 094 015 525 545 565 585 006 026 046 066 576 696 517 23

024 044 064 084 005 025 045 065 085 006 026 046 066 086 007 027 047 067 43

064 584 015 035 055 075 595 516 536 556 576 007 027 047 067 587 508 63

515 535 065 085 506 526 056 076 596 517 537 067 087 508 528 83

565 095 016 536 066 086 507 037 557 577 008 528 548 04

026 046 566 096 517 047 567 097 518 048 568 098 24

21 / 2 sniP"3dna" 576 007 527 057 577 008 528 558 088 509 44

037 067 587 018 048 568 098 029 549 64

097 028 548 578 509 039 069 84

DIAGONAL-POST DIE SETSType D2


Shoulder Bushings

SHANKS AVAILABLE1 1/2” dia. x 2 1/8 (1-1/4-12 NF)

2” dia. x 2 7/8 (1-1/4-12 NF)2 1/2” dia x 2 7/8 (1-1/2-12 NF)3” dia. x 3 (1-1/2-12 NF)

!!!!! Special Die Sets are manufactured in any sizeor shape to your specifications.

!!!!! Prices available on request – F.O.B. our plant

!!!!! Sales tax extra if applicable

!!!!! Type C2 and D2 Die Sets are made to order and may not be returned for credit.




snoisnemiDP 1 1 1 / 4 11 / 2 1 3 / 4 2 2 1 / 2 3

F 2 2 1 / 4 2 1 / 2 3 3 1 / 4 33 / 4 4 1 / 2H 11 / 4 1 1 / 2 11 / 2 1 1 / 2 11 / 2 2 2

B

01 21 41 61 81 02 22 42 62 82 03 23 43

A

6 51 02 52 03 03 538 52 03 03 53 04 54 05 55 06 56 07

01 03 53 04 54 05 06 56 07 57 08 58 59 001

21 04 05 55 56 07 57 58 09 001 501 011 021

41 55 56 57 08 09 001 501 511 521 031 041

61 57 58 59 501 011 021 031 041 051 061

81 1 1 /2 sniP" 59 501 511 521 531 541 061 071 081

02 511 031 041 051 561 571 581 002

22 041 551 561 081 591 502 022

42 071 081 591 012 522 042

62 1 3 /4 sniP" 002 512 032 542 062

82 032 542 062 082

03 562 082 003

23 003 023

43 sniP"2 043

63

83

04gnidahsr olocybdepuor ger asezisecapseiD

.sr etemaidsnipediugdetseggushtiw

thgiewetamixor ppaehtetacidnisr ebmunxoB.kciht"1etalpelgnisaf o

24

44

64

84

05

FOUR-POST DIE SETSType R4


F

F

A

B

SPECIFY

H

P

P.H.

D.H.

SHANKS AVAILABLE11/2” dia. x 2 1/8 (1-1/4-12 NF)2” dia. x 2 7/8 (1-1/4-12 NF)21/2” dia x 2 7/8 (1-1/2-12 NF)

3” dia. x 3 (1-1/2-12 NF)

When ordering specify:1. Type R42. Dimension A & B3. Thickness P.H. and D.H.4. Pin Diameter and Length5. Size and location of Shank if required6. Bushings if other than standard

1” Pins 11/4” Pins

! Left rear guide pin is offset .25” to preventaccidental reversing

! Special Die Sets are manufactured in anysize or shape to your specifications

! Prices available on request – F.O.B. our

plant! Sales tax extra if applicable

! R4 Die Sets are made to order and maynot be returned for credit



B

63 83 04 24 44 64 84 05 25 45 65 85 06 26 46 66 86 07 27 47 67 87 08 28

6

A

8

501 011 511 521 031 531 041 541 051 061 561 071 571 081 581 591 002 502 012 512 022 032 532 042 01

521 531 041 541 551 061 071 571 081 091 591 502 012 512 522 032 042 542 552 062 562 572 082 092 21

541 551 561 071 081 091 591 502 512 022 032 532 542 552 062 072 082 582 592 503 013 023 033 533 41

071 081 581 591 502 512 522 532 542 552 062 072 082 092 003 013 023 033 533 543 553 563 573 583 61

091 002 012 022 032 042 552 562 572 582 592 503 513 523 533 053 063 073 083 093 004 014 024 034 81

012 022 532 542 552 072 082 592 503 513 033 043 053 563 573 583 004 014 024 534 544 554 074 02

032 542 552 072 582 592 013 023 533 053 063 573 583 004 014 524 044 054 564 571 094 005 515 22

552 562 082 592 013 523 533 053 563 083 593 504 024 534 054 564 084 094 505 025 535 055 065 42

572 092 503 023 533 053 563 083 593 014 524 044 554 074 584 005 025 535 055 565 085 595 016 62

592 013 033 543 063 573 593 014 524 544 064 574 094 015 525 045 555 575 095 506 526 046 82

513 533 053 073 583 504 024 044 554 574 094 015 525 545 065 085 595 516 036 056 076 586 03

533 553 573 593 014 034 054 074 584 505 525 545 065 085 006 026 536 556 576 596 017 037 23

063 083 004 024 044 064 084 005 025 535 555 575 595 516 536 556 576 047 517 537 557 43

083 004 024 544 564 584 505 525 055 075 095 016 036 556 576 596 517 087 076 087 008 63

524 544 564 094 015 535 555 085 006 526 546 076 096 017 537 557 028 008 528 83

074 094 515 045 065 585 016 036 556 086 507 527 057 577 597 068 548 568 04

515 045 565 095 516 046 566 096 517 047 067 587 018 538 009 588 24

565 595 026 546 076 596 027 547 577 008 528 058 578 549 44

2 1 /2 sniP" 026 546 576 007 527 557 087 018 538 068 098 519 64

576 007 037 067 587 518 548 078 009 039 559 84

037 067 097 028 058 088 019 539 569 05

FOUR-POST DIE SETSType R4, cont.


Shoulder Bushings

Anchor will build die sets up to 120” wide x 360” long.




OPERATING DATA & DESIGN SELECTION

In component selection varied characteristics must be taken into consideration when selecting length of guidepost, bushing and ball-bearing retainer, such as stroke, shut height and type of operation. To help in your selection we have supplied engineering data and instructions that should be used as a guide when making your component selection. The following conditions should be considered for the most effective performance in aspecific application.

PRE-LOAD RELIEVED AT TOP OFSTROKE

FULL DISENGAGEMENT

In this condition the guide post, bushingand ball-bearing retainer remain in full

contact throughout the stroke cycle.This selection is beneficial and recom-mended for high speed, high production,short stroke dies.

This may be accomplished by selectingthe guide post bushing length that al-

lows the guide post to disengage thebushing at the beginning of the strokeor cycle. This will result in the loss of pre-load while the ball retainer is stillwithin the bushing. This condition maybe utilized with long stroke dies. It alsoprovides safe operation by eliminatingpinch points and prevents foreign mate-rials from entering the bushing. A fur-ther benefit is it allows for re-registra-tion of the ball retainer on each stroke.Removal of the punch holder or die holder from press is possible without total re-moval of dies.

This condition is permissable whenthe ball retainer must totally disen-

gage the bushing on applications re-quiring long strokes. Safety precau-tions (as outlined on page 12) shouldalways be taken when employing thismethod.

It should also be noted that the aboveillustration depicts the proper way toassemble (insert) the guide post andball-bearing retainer into the bushing.

When in a pre-loaded (rolling press fit) condition, the ball retainer will travel half the distance of movement. Ina die set application it would be half the distance of the press stroke.

FULL CONTACT PRE-LOAD

BALL BEARING ASSEMBLYLUBRICATION RECOMMENDATION

In operation of ball assembly, add lubricant once each 8-hour shift by spray or brush application. Use a light-weight spindle oil like Lamina Ball Lube.

NEVER USE GREASE

Ball-Bearing



When ordering specify:1. Type “Standard”2. Dimension A & B3. Thickness P.H. and D.H.4. Minimum Shut Height5. Stroke of Press6. Size and location of Shank if required

A B C D E L S W . H.P .H.DNIP

.aiD htgneL31 / 2 6 6 4 2 9

31 / 61

6 1 1 / 4 11 / 2 1

DEPENDS

ON

SHUT

HEI

GHT

&

STROKE

31 / 2 01 01 8 2 31 6 1 1 / 4 11 / 2 141 / 2 5 5 3 2 1 / 2 8 7 1 1 / 4 11 / 2 141 / 2 9 9 7 2 1 / 2 21 7 1 1 / 4 11 / 2 1

41

/ 2 31 31 011

/ 2 21

/ 2 611

/ 2 71

/ 2 11

/ 2 13

/ 4 11

/ 451 / 2 6 6 4 3 9

11 / 61

8 1 1 / 4 11 / 2 151 / 2 8 8 6 3 11 8 1 1 / 4 11 / 2 151 / 2 01 01 7 1 / 2 3 31 1 / 2 81 / 2 11 / 2 13 / 4 11 / 4

61 / 2 7 7 4 1 / 2 31 / 2 01 1 / 2 93 / 8 11 / 4 11 / 2 11 / 4

61 / 2 9 9 6 1 / 2 31 / 2 31 9 3 / 4 11 / 2 13 / 4 11 / 4

61 / 2 11 11 8 1 / 2 31 / 2 41 1 / 2 91 / 2 11 / 2 13 / 4 11 / 4

61 / 2 31 31 01 1 / 2 31 / 2 61 1 / 2 91 / 2 11 / 2 13 / 4 11 / 4

71 / 2 8 8 5 1 / 2 4 11 1 / 2 01 1 / 2 11 / 2 13 / 4 11 / 4

71 / 2 01 01 7 1 / 2 4 31 1 / 2 01 3 / 8 11 / 2 13 / 4 11 / 4

71 / 2 21 21 9 1 / 2 4 51 3 / 8 01 1 / 2 13 / 4 2 1 1 / 4

81 / 2 9 9 6 1 / 2 41 / 2 21 1 / 2 11 3 / 8 11 / 2 13 / 4 11 / 4

81 / 2 11 11 8 1 / 2 41 / 2 41 1 / 2 11 1 / 2 13 / 4 2 1 1 / 481 / 2 31 31 01 1 / 4 41 / 2 61 3 / 4 11 3 / 4 13 / 4 2 1 1 / 2

81 / 2 51 51 21 1 / 4 41 / 2 91 21 1 3 / 4 2 1 1 / 2

91 / 2 8 8 5 1 / 2 5 11 1 / 2 21 1 / 2 11 / 2 13 / 4 11 / 4

91 / 2 01 01 7 1 / 2 5 31 1 / 2 21 3 / 8 13 / 4 2 1 1 / 4

91 / 2 21 21 9 1 / 4 5 61 31 1 3 / 4 2 1 1 / 2

11 1 / 2 8 8 5 1 / 4 6 11 3 / 4 41 5 / 8 13 / 4 2 1 1 / 2

11 1 / 2 01 01 7 1 / 4 6 31 3 / 4 41 3 / 4 13 / 4 2 1 1 / 2

11 1 / 2 21 21 9 1 / 4 6 51 3 / 4 41 3 / 4 2 2 1 / 4 11 / 2

11 1 / 2 51 51 21 1 / 4 6 81 3 / 4 41 3 / 4 2 2 1 / 4 11 / 2

SNOITACIFICEPSRUOYOTELBALIAVASEZISREHTO

Anchor Ball-Bearing Die Sets are made totraditionally high manufacturing requirementswhich have determined quality standards in thedie set industry.

Lamina Components ’ Precision Retainer ismade of heat-treated aluminum alloys with

chrome alloy steel balls.

Lamina Components ’ Guide Posts and Bush-ings are manufactured to rigid standards usingthe highest quality steel alloys.


LC

A

E

B

S

W

P

P.H. D.H.

SPECIFYSHUT HEIGHT

STANDARD BALL-BEARING DIE SETSMild Steel Plate – Stress Relieved upon Request

Also available in 4140 steel and Aluminum

D





When ordering specify:1. Type BB-R-42. Dimension A & B3. Thickness K and J4. Minimum Shut Height5. Stroke of Press6. Size and location of Shank if required

FOUR POST BALL-BEARING DIE SETS

F C

F

A

B

FOUR POSTTYPE

BB-R-4

C

O

K

J


Special Die Sets are manufactured in anysize or shape to your specifications.

SNOISNEMIDMUMINIMDETSEGGUSNEHW B "11ot6= B "71ot21= B "32ot81= B "92ot42=

=A J K O J K O J K O J K O"8ot6 11 / 4 1 1 1 1 / 2 1 1 1 / 4 11 / 2 1 1 / 4 11 / 2 1 1 / 2 11 / 4 13 / 4"11ot9 11 / 2 1 1 1 1 / 2 1 1 / 4 11 / 4 11 / 2 1 1 / 4 11 / 2 1 3 / 4 11 / 2 13 / 4"71ot21 11 / 2 1 1 / 4 11 / 4 13 / 4 1 1 / 2 11 / 2 1 3 / 4 11 / 2 13 / 4"32ot81 13 / 4 1 1 / 2 11 / 2 2 1 3 / 4 13 / 4"92ot42 2 1 3 / 4 13 / 4

"44ot03

"06ot54

NEHW B "44ot03= B "96ot54= B "001ot07==A J K O J K O J K O

"8ot6 13 / 4 11 / 2 2 2 1 1 / 2 2"11ot9 13 / 4 11 / 2 2 2 1 1 / 2 2 2 1 / 2 1 3 / 4 21 / 2"71ot21 2 1 3 / 4 2 2 1 / 2 1 3 / 4 2 2 1 / 2 2 2 1 / 2"32ot81 2 1 3 / 4 2 2 1 / 2 1 3 / 4 2 3 2 2 1 / 2"92ot42 21 / 2 2 2 2 1 / 2 2 2 3 2 2 1 / 2"44ot03 21 / 2 2 2 3 2 2 3 1 / 2 2 1 / 2 21 / 2"06ot54 3 2 2 3 1 / 2 2 1 / 2 21 / 2

See our complete Lamina ball-bearing component selectionin the Ball-Bearing Products

BB-R-4

catalogue.



Anchor Lamina Contacts

Anchor Die Sets2590 Ouellette Avenue, Windsor, ON, Canada N8X 1L7Tel: 519-966-4431, 800-265-5007; Fax: 519-966-3594E-mail: [email protected]

1450 Alphonse D-Roy, Montreal, QC, Canada H1W 2K8Tel: 514-525-5560, 800-263-5560; Fax: 514-525-7835E-mail: [email protected]

1200 Lakeshore Road East, Mississauga, ON, Canada L5E 1E9Tel: 905-274-3448, 800-268-5230; Fax: 905-274-7303E-mail: [email protected]

311 Pinebush Road, Cambridge, ON, Canada N1T 1B2Tel: 519-740-3060, 800-265-7842 (Canada only); Fax: 519-740-8213E-mail: [email protected]

95 East Ten Mile Road, Madison Heights, MI USA 48071Tel: 248-547-5910, 800-543-3790; Fax: 248-547-5918, 800-963-0400E-mail: [email protected]

4300 40th Street, S.E., Kentwood, MI USA 49512Tel: 616-949-8700, 888-526-2467; Fax: 616-949-9580E-mail: [email protected]

Lamina Components38505 Country Club Drive Suite 200Farmington Hills, MI USA 48331Tel: 248-489-9122, 800-652-6462; Fax: 248-553-6842E-Mail: [email protected]

Reliance Fabrications95 Lyon Avenue North, Tilbury, ON, Canada N0P 2L0Tel: 519-682-0470, 800-265-5295; Fax: 519-682-3616E-mail: [email protected]

www.anchorlamina.com

Committed to Quality & Customer Satisfaction

Anchor Lamina is committed to be the “customer focused” world-class supplier of choice to the metal-working and plastics forming industry.

We will help our customers to compete globally byproviding innovative and value added products andservices.

060-0403-5m

Documents

DieSetCat[1]