Diesel Generator set VTA28 series enginecummins05.cummins.com/Common/Systems/CPGKent.nsf... · Diesel Generator set VTA28 series engine Power Generation Power Generation Description

Diesel Generator setVTA28 series engine

PowerGeneration

PowerGeneration

Description

This Cummins® Power Generation commercial generatorset is a fully integrated power generation system,providing optimum performance, reliability, and versatilityfor stationary standby, prime power, and continuous dutyapplications.

This generator set is available with CEcertification.

All enclosed products are designed to meetor exceed EU noise legislation 2000/14/ECstep 2006.

This generator set has been designed tomeet or exceed ISO8528 regulation.

This generator set is designed in facilitiescertified to ISO9001 and manufactured in facilities certified to ISO9001 or ISO9002.

Features

Cummins® Heavy-Duty Engine - Rugged 4-cycleindustrial diesel delivers reliable power, low emissionsand fast response to load changes.

Permanent Magnet Generator (PMG) - Offersenhanced motor starting and fault clearing short circuitcapability.

Alternator - Several alternator sizes offer selectablemotor starting capability with low reactance 2/3 pitchwindings; low waveform distortion with non-linear loads,fault clearing short-circuits capability, and class Hinsulation.

Control System - Standard PowerCommand® electroniccontrol provides total system integration including remotestart/stop, precise frequency and voltage regulation,alarm and status message display, AmpSentry protection,output metering, auto-shutdown.

Cooling System - Standard integral set-mountedradiator system, designed and tested for rated ambienttemperatures, simplifies facility design requirements forrejected heat.

Enclosures - Optional weather-protective and sound-attenuated enclosures are available.

Warranty and Service - Backed by a comprehensivewarranty and worldwide distributor network.

Model

C700 D5 706 (565)

825 (660)

N/A

N/A

N/A

603 (754)

640 (512)

750 (600)

N/A

N/A

N/A

545 (681)

DS30-CPGK

DS31-CPGK

N/A

N/A

N/A

DS32-CPGK

C825 D5A

C600 D6

50Hz kVA (kW)

60Hz kW (kVA)

50Hz kVA (kW)

60Hz kW (kVA) 50Hz 60Hz

teehsataDgnitaR emirPgnitaR ybdnatS

Our energy working for you.™

www.cumminspower.com©2010 | Cummins Power Generation Inc. | All rights reserved | Specifications subject to change without notice | Cummins Power Generation andCummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks ofCummins Power Generation. Other company, product or service names may be trademarks or service marks of others. SS13-CPGK-RevB (03/10).

2000/14/EC

ISO8528

> Specification sheet640kVA - 825kVA 50Hz545kW - 603kW 60Hz


PowerGeneration

Generator Set Specifications

2G 8258OSI ssalC noitalugeR ronrevoG

%5.0 ± daoL lluF ot daoL oN ,noitalugeR egatloV

%5.0 ± noitairaV egatloV modnaR

suonorhcosI noitalugeR ycneuqerF

%52.0± noitairaV ycneuqerF modnaR

2-6-00016 NE SB / 4-6-00016 NE SBytilibitapmoC CME

Engine Specifications

delooc-retfa dna degrahC obrut ,enil ni ,elcyc 4 ngiseD

).ni5.5( mm7.931 eroB

).ni6( mm4.251 ekortS

)3.ni0171( sretil 82 tnemecalpsiD

rednilyc 21 V°04 ,srenil rednilyc tew elbaecalper htiw nori tsaC kcolB rednilyC

)C°0( F°23 erutarepmet tneibma ta spma 066 yticapaC yrettaB

spma 55 rotanretlA gnigrahC yrettaB

dnuorg evitagen ,tlov 42 egatloV gnitratS

noitcejni tceriD metsyS leuF

rotarapes retaw htiw sretlif leuf no nipS retliF leuF

rotacidni noitcirtser htiw tnemele elbaecalper yrD epyT renaelC riA

wolf lluf ,no-nips eerhT )s(epyT retliF liO ebuL

rotaidar tneibma )C°05( F°221 metsyS gnilooC dradnatS

Alternator Specifications

dleif gnivlover foorp pird ,elop 4 ,sselhsurB ngiseD

Stator 2/3 pitch

csid elbixelf yb delpuoc tceriD rotoR

H ssalC metsyS noitalusnI

Standard Temperature Rise 125°C @ Standby, 105°C @ Prime

)rotareneG tengaM tnenamreP( GMP epyT reticxE

)W( C ,)V( B ,)U( A noitatoR esahP

naf rewolb lagufirtnec evird tceriD gnilooC rotanretlA

AC Waveform T %5 < daol raenil decnalab gnitrotsid noN .%5.1 < daol oN noitrotsiD cinomraH lato

34.22-1GM AMEN rep 05< )FIT( rotcaF ecneulfnI enohpeleT

Telephone Harmonic Factor (THF) <3%

Available Voltages

eniL – eniL / lartueN – eniL zH06eniL – eniL / lartueN – eniL zH05• 110/190 • 220/380 • 110/190 • 139/240 • 255/440

084/772 • 083/022 • 002/511 • 004/032 • 002/511 • 083/032 • 802/021 • 614/042 • 802/021 • 614/042 • 022/721 • 044/552 • 022/721 •

Generator Set Options

*Note: Some options may not be available on all models – consult factory for availability.

Engine• Heavy Duty air filter• Water jacket heater 220/240 v

Cooling• Antifreeze 50/50 (Ethylene glycol)

Enclosure• Sound attenuated canopy

Alternator• Alternator heater• Exciter voltage regulator (PMG)

Control Panel• 3 pole Main Circuit Breaker• 4 pole Main Circuit Breaker

Warranty• 5 years for Standby application• 2 years for Prime application

Silencer• 9 dB attenuation critical silencer• 25 dB residential - delivered loose



PowerGeneration

Control System – PCC3100

The PowerCommand™ 3100 Control is a microprocessor-based generator set monitoring, andcontrol system. The control provides an operatorinterface to the genset, digital voltage regulation, digitalgoverning and generator set protective functions.

The PowerCommand™ 3100 generator set control issuitable for use on a wide range of generator sets innonparalleling and paralleling applications.

The PowerCommand™ Control can be configured for anyfrequency, voltage and power connection configurationfrom 120 to13,800 VAC for for 50Hz or 60Hz operation.

Power for the control is derived from the generator setstarting batteries. The control functions over a voltagerange from 8VDC to 35VDC.

Major Features

• Digital Governing and Voltage Regulation, includingdigital overcurrent fault regulation.

• Digital Voltage Regulation with 3-phase sensing.

• AmpSentry™ Protection for true alternator overcurrentprotection.

• Analog and Digital AC Output Metering.

• Battery Monitoring System to sense and warn against aweak battery condition.

• Digital Alarm and Status Message Display.

• Generator set Monitoring: Displays status of all criticalengine and alternator generator set functions.

• Smart Starting Control System: Integrated fuel rampingto limit black smoke and frequency overshoot.

• Advanced Serviceability using InPower™, a PC-basedsoftware service tool.

Control System

Includes all functions to locally or remotely start andstop, and protect the generator set.

Control Switch - RUN/OFF/AUTO

OFF Mode - the generator set is shut down andcannot be started.

RUN mode the generator set will execute its startsequence.

AUTO mode, the generator set can be started with astart signal from a remote device.

LED Indicating Lamps – includes LED indicatinglamps for the following functions:

Not-in-auto mode Common wiringShutdownPhase and scale indicationFault reset switch. Allows the opperator to reset thecontrol after warning or shutdownEmergency stop switch - imediately shuts down thegenerator set operation

Base Engine ProtectionOverspeed shutdownLow Oil Pressure Warning / ShutdownHigh Engine Temperature Warning / ShutdownUnderspeed / Sensor Fail ShutdownFail to Start / Fail to CrankLow / high battery voltage

Options

Integrated PowerCommand Digital Paralleling ControlsKey Type Mode Selector SwitchExhaust Temperature MonitoringPowerCommand NetworkRefer to the PowerCommand Controls Technical Bulletinfor detailed information(S1025C-Non-Paralleling / S1005c-Paralleling)



PowerGeneration

Ratings Definitions

Emergency Standby Power (ESP): Applicable for supplying power to varying electrical loadfor the duration of power interruption of a reliable utilitysource. Emergency Standby Power (ESP) is inaccordance with ISO 8528. Fuel Stop power inaccordance with ISO 3046, AS 2789, DIN 6271 and BS5514.

Limited-Time running Power (LTP): Applicable for supplying power to a constant electricalload for limited hours. Limited Time Running Power (LTP)is in accordance with ISO 8528.

Prime Power (PRP): Applicable for supplying power to varying electrical loadfor unlimited hours. Prime Power (PRP) is in accordancewith ISO 8528. Ten percent overload capability isavailable in accordance with ISO 3046, AS 2789, DIN6271 and BS 5514.

Base Load (Continuous) Power (COP): Applicable for supplying power continuously to aconstant electrical load for unlimited hours. ContinuousPower (COP) in accordance with ISO 8528, ISO 3046, AS2789, DIN 6271 and BS 5514.

This outline drawing is to provide representativeconfiguration details for Model series only.

See respective model data sheet for specific modeloutline drawing number.

Do not use for installation design.

Cummins Power Generation

Europe, CIS, Middle East and AfricaManston Park Columbus Ave.Manston RamsgateKent CT12 5BF United KingdomPhone 44 1843 255000Fax 44 1843 255902

Americas1400 73rd Avenue N.E.Minneapolis, MN 55432 USAPhone 763 574 5000 Fax 763 574 5298

Asia Pacific10 Toh Guan Road #07-01TT International TradeparkSingapore 608838Phone 65 6417 2388Fax 65 6417 2399

Model Dim “A” mm Dim “B” mm Dim “C” mm Set weight* dry kg Set weight* wet kg

C700 D5 4047 1608 1942 5491 5760

C825 D5A 4047 1608 2187 5771 6040

C600 D6 4047 1608 1942 5491 5760

*Note: Weights represent a set with standard features. See outline drawings for weights of other configurations.



Documents

Diesel Generator set VTA28 series enginecummins05.cummins.com/Common/Systems/CPGKent.nsf... · Diesel Generator set VTA28 series engine Power Generation Power Generation Description