T 0845 4567 007 F 0845 4567 706 E [email protected] www.phillipsplastics.co.uk When producing hundreds or thousands of products consistency and quality are key. Die cutting is a widely used method to cut and crease profile impressions from materials such as polypropylene, solid board or corrugated card. We operate a number of die cutting processes in our production facility that have been customised to suit the substrates we work with. When a product design has been approved an electronic file from our Kasemake CAD system is generated to produce a cutting forme. The flat design is burnt into a high-density plywood base panel using laser technology. The laser-cut template is then ‘ruled’ with various cutting and creasing blades being fixed into the wooden base. To finish the cutting forme, ejection rubber is applied around all cutting blades to achieve a clean cut without damaging the forme or die-cutting press. We have a range of die cutting machinery including a clicking press for use with materials such as foam or expanded PVC and a platen machine that has been customised with a heated bed which is perfect for polypropylene. Cutting formes are effective tools for production runs and can be produced at a relatively low cost. They are manufactured to a high level of accuracy ensuring consistency throughout the production run. Die Cutting The cost-effective approach to product manufacture A cutting forme with red ejection rubbers Mass production capabilities Heated cutting for smoother edges Any shape is possible Modified die cutter with heated head Get creative with your cut outs Phone: 0845 4567 007 Email: [email protected] Web: www.phillipsplastics.co.uk Store: www.phillipsdirect.co.uk Your Corporate Branding Specialists

Die Cutting

Download PDF Report

Upload
richard-garratt
View
225
Download
2

Tags:

Embed Size (px)

DESCRIPTION

Citation preview

T 0845 4567 007 F 0845 4567 706 E [email protected] www.phillipsplastics.co.uk

When producing hundreds or thousands of products consistency and quality are key. Die cutting is a widely used method to cut and crease profile impressions from materials such as polypropylene, solid board or corrugated card. We operate a number of die cutting processes in our production facility that have been customised to suit the substrates we work with.

When a product design has been approved an electronic file from our Kasemake CAD system is generated to produce a cutting forme. The flat design is burnt into a high-density plywood base panel using laser technology. The laser-cut template is then ‘ruled’ with various cutting and creasing blades being fixed into the wooden base. To finish the cutting forme, ejection rubber is applied around all cutting blades to achieve a clean cut without damaging the forme or die-cutting press.

We have a range of die cutting machinery including a clicking press for use with materials such as foam or expanded PVC and a platen machine that has been customised with a heated bed which is perfect for polypropylene.

Cutting formes are effective tools for production runs and can be produced at a relatively low cost. They are manufactured to a high level of accuracy ensuring consistency throughout the production run.

DieCuttingThe cost-effectiveapproach toproduct manufacture

A cutting forme withred ejection rubbers

Mass productioncapabilities

Heated cutting forsmoother edges

Any shape ispossible

Modified die cutterwith heated head

Get creative withyour cut outs

Phone:

0845 4567 007Email: [email protected]

Web: www.phillipsplastics.co.ukStore: www.phillipsdirect.co.uk

YourCorporate Branding

Specialists