Underground core drill rig for mineral exploration

DIAMECSMART 6

Patented, state of the art rotation unit with few moving parts reduces operation costs. Both the rotation unit and rod holder are synchronized. Rotation unit available in two sizes, A-N and B-H

DESIGNED FOR HIGH PERFORMANCEAN ADVANCED RIG CONTROL SYSTEM ALLOWS THE DIAMEC SMART 6 TO BE OPERATED AUTOMATICALLY. ALL DRILLING FUNCTIONS ARE EASILY PERFORMED, FROM A SAFE DISTANCE, WITH A REMOTE LIGHTWEIGHT CONTROL PANEL. A COMPACT FEED FRAME GIVES OPTIMAL CONTROL USING EQUAL TRAVEL SPEED AND FORCE IN BOTH DIRECTIONS. AN OPTIONAL ROD HANDLING SYSTEM, FURTHER INCREASES SAFETY AND PRODUCTIVITY.

MAIN BENEFITSAutomated drilling increases productivity and lowers operational costs

Fast and safe positioning means less time wasted between holes

Modularized design enables you to select the optimal configuration for your operation

Optional state of the art rod handling system for optimum safety and productivity

Unique positioning design including a 360° turn table enables fast and accurate rig set up, especially in confined spaces

The gas spring rod holder opens hydraulically and closes with gas pressure for increased safety. In case of loss of hydraulic pressure, the rod holder closes instantly.

All drilling functions, including the rod handling, are easily performed from the remote light weight control panel.

A two-hand activation controller ensures safe operations of the rod handler

Rotation unit comes with sealed gear box, thus lowering operational costs especially for up-hole drilling.

+ VERSATILITY AT ITS BESTDiamec Smart 6 can be configured in several ways depending

upon your requirements. Two different feed frames enable drilling in confined spaces as well as drilling deep holes. Two rotation

units offer a wide range of dimensions for various drilling conditions. Various carrier options available as well.

+ ERGONOMICS AND SAFETYDiamec Smart 6 can be equipped with a state of the art rod handling system that relieves the operator and many of the hazardous operations in the drilling process, such as handling of the inner tube. All drilling operations are performed from a safe distance with an easy to use control panel, and the two-hand controller used for acknowledging

the rod handler operations, further improves safety.

+ PRODUCTIVITY AND LOWER OPERATIONAL COSTSDiamec Smart 6 has an advanced Rig Control System allowing it to be operated automatically. From the touch screen on the remote control panel, drilling parameters are easily set and the monitored. The automatic feature, including constant penetration rate, can improve bit life up to 400% compared to manual drilling. It also reduces risk for core blockage and hole deviation, which minimizes risk of drilling errors and operator fatigue.

OUR DIAMEC RIGS HAVE AN ADVANCED, VERSATILE AND COMPACT DESIGN WHICH MAKES THEM IDEAL FOR THE UNDERGROUND ENVIRONMENT AND A WIDE RANGE OF APPLICATIONS. THE SOPHISTICATED POSITIONER AND TURNTABLE MAKES IT EASY TO REACH DESIRED DRILLING POSITION AND ANGLE WITHOUT ANY ADJUSTMENTS.

ATLAS COPCO SERVICEEven the best equipment requires regular service to ensure optimal performance. Atlas Copco provides service solutions to safeguard an optimized relationship between productivity, availability and operational cost. Atlas Copco Mining and Rock Excavation Technique has over 3 300 technicians located in over 80 countries. By combining the usage of Atlas Copco genuine parts with service provided by a certified Atlas Copco technician, you’ll have a winning combination no matter of where in the world you operate.

VERSATILE AND PRODUCTIVE

TECHNICAL SPECIFICATIONS

Model 850 1800 1800 Deep hole

Feed length 850 mm (33.5 in) 1,800 mm (71 in) 1,800 mm (71 in)

Feed force / Pull force 65 kN (14,600 lbf) 65 kN (14,600 lbf) 89 kN (20,010 lbf)

Max feed speed: 1.0 m/s (3,28 fps) 1.0 m/s (3,28 fps) 0.8 m/s (2,7 fps)

FEED FRAME ALTERNATIVES

Hydraulically open and gas pressure closed. In case of loss of hydraulic pressure, the rod holder closes instantly.

Max rod size: 89 mm (3.5 in)

Bore (without jaws): 102 mm (4.0 in)

Bore (without covers): 170 mm (6.7 in)

Axial holding force: 45 kN (10,120 lbf)

Axial holding force TC inserts: 90 kN (20,240 lbf)

ROD HOLDER

Capacity (4,75 mm wire): 1,300 m (4,265 ft)

Pull min. (full drum): 4 kN (899 lbf)

Pull max. (empty drum): 11.2 kN (2,523 lbf)

Line speed min (empty drum): 88 m/min (287 ft/min)

Line speed max (full drum): 246 m/min (806 ft/min)

Weight (without wire) 120 kg (287 lb)

Level wind angle: Adjustable

WIRELINE HOIST

The below drill depth capacities only serve as guidelines and refer to vertical down drilling. Atlas Copco cannot guarantee that these results can be achieved in all drilling conditions.

Standard Deep hole

Meter Feet Meter Feet

A wireline 1,300 m 4,265 - -

B wireline 1,000 m 3,291 1,300 m 4,265

N wireline 750 m 2,625 900 m 2,953

H wireline 450 m 1,476 600 m 1,969

CORE DRILLING DEPTH CAPACITY

Model 80CC A-N 110CC B-H 160CC B-H

Rod sizes: A-N B-H B-H

Max torque 1,115 Nm (882 ft lbf) 1,634 Nm (1,205 ft lbf) 2,390 Nm (1,762 ft lbf)

Max rotation speed 1,640 rpm 1,400 rpm 1,190 rpm

Spindle (inner diameter) 78 mm (3.1 in) 101 mm (4,0 in) 101 mm (4,0 in)

Power hydraulic motor hydraulic motor hydraulic motor

Chuck axial holding force 100 kN (22,480 lbf) 150 kN (33,729 lbf) 150 kN (33,729 lbf)

Weight: 162 kg (357 lb) 254 kg (560 lb) 280 kg (617 lb)

ROTATION UNIT ALTERNATIVES

Optional air/oil cooler provides sufficient cooling capacity up to +45°C ambient temperature

Gas spring rod holder is hydraulically opened and closed. In case of loss of hydraulic pressure the rod holder closes instantly

Compact feed frame, with direct acting telescopic feed cylinder, gives optimal control and equal travel speed and force in both directions

Diamec SMART 6

Safety guard opens in different sections for easy operations

TECHNICAL SPECIFICATIONS

Electrical power unit with two variable flow hydraulic pumps, mounted in tandem.

Power: 90 kW (122 hp)

RPM: 1,450 rpm

Main pump

Max flow: 200 l/m (52.8 gpm)

Max Presure: 315 bar (4.569 psi)

Service pump

Max flow: 65 l/m (17.2 gpm)

Max presure: 240 bar (3.481 psi)

Cooler: Water type oil cooler

Oil tank: 130 l (34.4 gal)

Dimensions mm inch

A 1,845 73

B 1,250 49

C 790 31

Weight: 1,150 kg (2,315 Ib)

POWER UNIT

The flush pumps are designed for both mud and water flushing. The distribution block is prepared for mounting of accumulator, adjustable steady flow valve and other optional equipment.

Model Trido 80H Trido 140H

Flow: 80 l/m (21 gpm) 140 l/m (37 gpm)

Pressure: 50 bar (700 psi) 70 bar (1,000 psi)

Weight: 148 kg ( 327 lb) 230 kg ( 507 lb)

FLUSH PUMP ALTERNATIVES

Control system type: Atlas Copco Rig Control System (RCS)

Display: 17“ touch screen

Controls: Joystick, control knob and foot pedal

Data logging: Internal memory

Data Export: USB Port

Weight: 24 kg ( xx lb)

CONTROL SYSTEM AND INTERFACE

Rod handling system: Rod handling system fully integrated with the rig control system for improved safety and productivity. (Not available for the Diamec MCR version)

Bracing device: Device suitable for use in narrow tunnels and drifts. It allows simple anchoring of the feed frame between the floor and roof/wall of the gallery, drift or tunnel.

Wheel kits: For easy repositioning of both rig and power unit.

Wireline sheave: For steep up hole drilling.

Air/Oil cooler: Air cooled heat exchanger for cooling of the hydraulic oil. If water supply is limited, it is possible to perform rod tripping, wire line operation and even drilling up to an ambient temperature of approx.. +30°C without water cooling.

Water collector: The water collector seals against the rock face and allows collection of flush water and cuttings.

Casing clamp: The casing clamp is used to align the feed frame to the casing tube.

Extra feed extension: With the optional 5 m feed extension tubes, the total length of the feed frame can be increased to 7,5 m. (Standard length 3,5–4,5 m.)

Keyhole wall bracket: Bracket for anchoring the rig to the wall while drilling up-hole. Available for both A-N and B-H size.

OPTIONAL EQUIPMENT AND ACCESSORIES

Working postions from -90 to +90

TECHNICAL SPECIFICATIONS

Working dimensions

Without RHS

Transport dimensions

WORKING DIMENSIONS

With RHS Without RHS

1800 850 1800

Dimension mm inch mm inch mm inch

A 3,840 151 3,000 118 3,700 146

B 3,840 151 3,200 126 3,700 146

C 4,730 186 4,190 165 4,550 179

D 4,120 162 3,000 118 3,500 138

E 5,010 197 3,890 153 4,390 173

F 2,200 87 1,030 41 1,030 41

TRANSPORT DIMENSIONS AND WEIGHT

With RHS Without RHS

1800 850 1800

Dimension mm inch mm inch mm inch

A 4,000 157 3,400 134 3,800 150

B 2,200 87 2,100 83 2,100 83

C 2,700 106 2,600 102 2,650 104

D 1,800 71 950 37 1,050 41

E 1,200 47 850 33 850 33

Weight (incl. A-N Rotation Unit) 2,750 kg (6,060 lb) 1,750 kg (3,860 lb) 1,850 kg (4,080 lb)

With RHS

We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time.This is what we call – Sustainable Productivity.

69

91 1817 01 2016-02 Ö

rebro, Sw

eden. Legal Notice ©

Copyright 2016, A

tlas Copco R

ock Drills A

B, Ö

rebro, Sw

eden. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos m

ay show

equipment w

ith optional extras. No w

arranty is made regarding specifications or otherw

ise. Specifications and equipm

ent are subject to change without notice. C

onsult your Atlas C

opco Custom

er Center for specific inform

ation.

www.atlascopco.com

COMMITTED TO SUSTAINABLE PRODUCTIVITY