The full line of State Modulating Ultra Force™ condensing water heaters has been designed to provide years of dependable service and feature industry leading technology. Models are available from 120,000 to 500,000 Btu/h and all deliver thermal efficiencies of 95% and higher. The unique helical coil heat exchanger limits weld joints for optimal service life while maximizing heat transfer.

Ultra Force is the perfect choice for demanding commercial hot water applications. The current modulating models adjust firing rate to the specific demand further increasing efficiency and money savings.

information

from 90 to 180

™ water heaters are compatible with the iCOMM™ remote monitoring system. Call 1.888.928.3702 for more information.

water to virtually eliminate radiant heat loss from chamber

swirling, uses centrifugal force to maximize

maintains energy efficiency over time

varying water conditions

slush coating technique to ensure uniform glass coverage

externally and internally for optimum protection

direct venting

connections allow for easy install and access

terminate separately outside building or through single opening, using concentric vent assembly

optimum efficiency and quiet operation

condensation from affecting burner operation

written warranty shipped with heater, or

extended warranty is optional)ANSl/NSF-5

GAS

INTAKE

CLEANOUT

T&P

DR

AIN

EXHAUST

1 1/2 TWATEROUTLET

FRONT 18°

30° 45°

42°

70°

20°

TOP RECIRCULATION RETURN

CLEANOUT

3/4 NPT

T&P

3/4 NPT DRAIN 1 1/2 T WATER INLET

T VENTCONNECTION

E

FRONT

CONNECTION1 1/ SUPPLY GAS

BACK

PVC AIR INTAKECONNECTION

B

WATER OUTLETHEIGHT

D

JG

IH

F

CA

FRONT BACK

VENTCONNECTION

3 INCH ALUMINUM(exhaust elbow)

E E

T & P VALVE

D

GJ

SUPPLY GASCONNECTION

F

B

CLEANOUT

DRAIN

RECIRCULATIONRETURN

WATERINLET

LOWERTEMPERATURE

PROBE

INTAKE AIRCONNECTION3 INCH PVC

HI

WATEROUTLETHEIGHT

C

A

SUGGESTED SPECIFICATION

™ model # _________ or equal, minimum 95% thermal efficiency, a storage capacity of ______ gallons, an input rating

combustibles.

readout.

120K-250K BTU Input:

of vent piping.

300K - 500K BTU Input:

feet of vent piping.

Water heater should incorporate the iCOMM™

For complete information on limited warranties, consult written warranty or contact the State Customer Care Center at 1-800-365-0024.©2014 State Industries, Inc. All Rights Reserved. State Industries, Inc., reserves the right to make product changes or improvements without prior notice.