Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
PLCC Series
Device-to-Board
6 CICO-063-S8A-T 6
8 CICO-083-S8A-T 8
14 CICO-143-S8A-T 14
16 ICE-163-S-TG30 CICO-163-S8A-T 16
18 CICO-183-S8A-T 18
20 PLCC-20TP-SMT.TT PLCC-20-SMT-TT PLCC-P-020-PS-TT CICO-203-S8A-T 20
24 ICE-243-S-TG30 ICA-246-S-TG CICO-243-S8A-T 24
24 CICO-246-S8A-T 24
28 PLCC-28TP-SMT-TT PLCC-28-SMT-TT PLCC-P-028-PS-TT CICO-286-S8A-T 28
32 PLCC-32TLP-SMT-TT PLCC-32TP-SMT-TT PLCC-32-SMT-TT PLCC-P-044-PS-TT SBL-320-SP95-TG CICO-326-S8A-T 32
42 CICO-426-S8A-T 42
44 PLCC-44TP-SMT-TT PLCC-44-SMT-TT PLCC-P-044-PS-TT 44
48 ICE-486-S-TT CICO-486-S8A-T 48
52 PLCC-52-SMT-TT PLCC-P-068-PS-TT 52
64 SBE-320-SP95-TG 64
68 PLCC-68-SMT-TT PLCC-P-084-PS-TT 68
84 PLCC-84-SMT-TT PLCC-P-084-PS-TT 84
2 3
PLCC SMT PLCC THRU HOLE ICE ICA SBE / SBL CICO
Plastic leaded chip carrier sockets with surface mount PCB tails toaccept JEDEC devices,
Plastic leaded chip carrier sockets withthrough hole PCB tails to accept
JEDEC devices.
Precision DIL open frame socket with round pinsutilising a high performance four finger Beryllium
Copper contact design. The socket accepts short ICleads and is side and end stackable.
Precision DIL socket with closed body style utilising fourfinger Beryllium Copper contacts. High retention design
ensures IC retention during vibration.
Low cost DIL open frame socket with stamped dual leaf contactfor gas tight device connection PCB tails are barbed to provide
retention to the board during assembly.
Single row and dual socket strips available with roundprecision contacts. The bodies can be snapped to size
and withstand high temperature IR.
Low Profile
Tape and Reel
Standard
Tape and Reel Tube PackedTurned Pin Turned Pin Turned Pin Stamped Pin
No. ofContacts
No. ofContacts
APPROVALS UL / CSA
www.3m.com/interconnects/ www.TEPRO.sk
0.050" pitch two piece connector range based upon the standard product but now offering ahigh temperature IR housing and PCB tails in through hole and SMT with a low profile. PCB
connection in three planes but with height stacking options.
PAK8 is part of a broad range of fine pitch SMTconnectors available for stacking and right angle PCBinterconnects, based on 0.8mm pitch. Both 1mm and
0.5mm pitch are also available upon request. Thisfamily includes the broadest range of stacking heightoptions from 3mm to 8mm and the widest offering of
pin count from 20 to 200 positions.
Board-to-Board
20 P50E-020P1-S1-TG P50E-020P1-SR1-TG P50E-020S-TG P25E-020S-TG 20
26 P50-026P-R1-TG P50-026P-RR1-TG P50-026S-R1-TG P50-026S-RR1-TG 26
40 P50E-040P1-S1-TG P50E-040P1-SR1-TG P50E-040S-TG P25E-040S-TG 40
50 P50E-050P1-S1-TG P50E-050P1-SR1-TG P50E-050S-TG P25E-050S-TG P50LE-050P1-R1-TGF P50LE-050P1-RR1-TGF P50LE-050P1-SML-TGF P50-050P-RR1-TG P50-050S-RR1-TG P50L-050P-RR1-TGF P50L-050S-RR1-TGF P50L-050P-CS-TGF P50L-050S-AS-TGF 50
60 P50-060P-R1-TG P50-060P-RR1-TG P50-060S-R1-TG P50-060S-RR1-TG 60
80 P08-080PLC-A-TG P08-080SLC-A-TG P50E-080P1-S1-TG P50E-080P1-SR1-TG P50E-080S-TG P25E-080S-TG 80
100 P08-100PLC-A-TG P08-100SLC-A-TG P50E-100P1-S1-TG P50E-100P1-SR1-TG P50E-100S-TG P25E-100S-TG 100
120 P50-120P-R1-TG P50-120P-RR1-TG P50-120S-R1-TG P50-120S-RR1-TG P50L-120P-AS-TGF P50L-120S-AS-TGF 120
4 5
PAK 8 PAK 50 STD PROFILE PAK 50 LOW PROFILE PAK 50 STD PROFILE THROUGH HOLE PAK 50 LOW PROFILE
0.050" pitch two piece connector range for PCB to PCB interconnect via ribbon cable.The PAK50 connector system is ideal for blind mate and high reliability requirementswith an audible and tactile mating action for intra cabinet applications. Customised
cable assemblies available upon request.
0.050" pitch two piece connector range based upon the standard pak50 product but featuring a high temperature housing and PCB tails in
through hole and SMT. PCB connection in three planes but withheight stacking options and including a ribbon cable to boardsolution. Customised cable assemblies available upon request.
Plugs SocketsStraight Right Angle
Plugs Plugs SocketsNo. of
ContactsNo. of
Contacts
APPROVALS UL / CSA
Plugs
for 0.050"Cable
for 0.025"Cable
IDC Sockets
Straight Right Angle Straight SMT Straight Right Angle Straight Right Angle
0.050" pitch two piece connector range for high performance PCB interconnect in three planes.The PAK50 connector system is ideal for blind mate and high reliability requirements with
an audible and tactile mating action.
Right Angle Right Angle StraightStraight
(7mm Stack Height)
Plugs Sockets Plugs Sockets
THROUGH HOLE STACKING SMT
DESCRIPTION ORDER CODE DETAIL
SocketsPLCC Universal extraction tool PLCC-ET fits all sizesPGA extraction tools PGA-ET 11x11 other sizes available upon request
PGA-ET 13x13Metpak 2 Sockets - right angleLower receiver MP2-REC-PCB-4-096 4 row(power and signal) MP2-REC-PCB-5-120 5 rowUpper push tool MP2-PT-M-4 4/5 row 96/120 position
Metpak 2 Headers - straightLower receiver MP2-REC-4-096 4 row
MP2-REC-5-120 5 rowUpper push tool (power) MP2-PT-HP08-4U 4 row
MP2-PT-HP10-5U 5 rowUpper push tool (signal) MP2-PT-H096-41 4 row 96 position
MP2-PT-H120-51 5 row 120 position
Tooling Products Other Metpak 2 tooling available upon request - consult salesDin 41612 - tooling available upon request
Board to BoardPak 50 tooling available - consult sales.
www.3m.com/interconnects/ www.TEPRO.sk
MiniSocket
50 82050-6000 82050-6006 3858-050 3442-45* 3443-113 81050-500203 81050-600203
60 82060-6000 82060-6006 3858-060 3442-45* 3443-113 81060-500203 81060-600203
68 82068-6000 82068-6006 3858-068 3442-45* 3443-113 81068-500203 81068-600203
80 82080-6000 82080-6006 3858-080 3442-45* 3443-113 81080-500203 81080-600203
100 82100-6000 82100-6006 3858-100 3442-45* 3443-113 81100-500203 81100-600203
APPROVALS
Mini Systems1.27 x 2.54 mm Mini Sockets and Headers • 2 x 2 mm Interconnection System
6 7
MINI SOCKET / HEADER CONNECTORS MINI SOCKET / HEADER CONNECTORS 2MM INTERCONNECTION SYSTEM
82XXX Series Mini Sockets 81XXX Series Mini Headers
Mini Socketw/strain relief
Strainrelief
PlatenLocator
plateMini Headerright angle
Mini Headerstraight
Pincount
UL / CSA
* with press 3335 use 3442-46 platen Short latch / ejector : 3505-29
Long latch / ejector : 3505-28
A complete range of 2 x 2 mm Sockets and Headers,through hole or SMT, allowing a variety of
customised board to board or wireto board solutions.
Ask your 3M Distributor/Contact for design-in support.
30µ” gold plating 30µ” gold plating
www.3m.com/interconnects/ www.TEPRO.sk
Socketwithout
centre bump
2.54 x 2.54 mm Interconnection Systems type DIN 41651Wiremount Sockets / Boardmount Headers
8 9
SOCKET / HEADER CONNECTORS TYPE DIN 41651
34XX Series Sockets 34XX Series Headers 25XX Series Low Profile Headers
PincountSocketwith
centre bump
Strainrelief
Pulltab
PlatenLocator
plate
Right angleshort
latch/ejectors
Right anglelong
latch/ejectors
Straightshort
latch/ejectors
Straightlong
latch/ejectors
Right angleHeader
StraightHeader
Socketretainer clip
short
Socketretainer clip
longPincount
10 3473-6000 3473-6600 3448-3010 3490-1 3442-9 3443-94 3793-5502 3793-5602 3793-6502 3793-6602 2510-5002 2510-6002 3505-8010 3505-8110 10
14 3385-6000 3385-6600 3448-3014 3490-1 3442-9 3443-94 3314-5502 3314-5602 3314-6502 3314-6602 2514-5002 2514-6002 3505-8014 3505-8114 14
16 3452-6000 3452-6600 3448-3016 3490-1 3442-9 3443-94 3408-5502 3408-5602 3408-6502 3408-6602 2516-5002 2516-6002 3505-8016 3505-8116 16
20 3421-6000 3421-6600 3448-3020 3490-2 3442-9 3443-94 3428-5502 3428-5602 3428-6502 3428-6602 2520-5002 2520-6002 3505-8020 3505-8120 20
24 3626-6600 3448-3024 3490-2 3442-9 3443-94 2524-5002 2524-6002 24
26 3399-6000 3399-6600 3448-3026 3490-2 3442-9 3443-94 3429-5502 3429-5602 3429-6502 3429-6602 2526-5002 2526-6002 3505-8026 3505-8126 26
30 3419-6600 3448-3030 3490-3 3442-9 3443-94 2530-5002 2530-6002 30
34 3414-6000 3414-6600 3448-3034 3490-3 3442-9 3443-94 3431-5502 3431-5602 3431-6502 3431-6602 2534-5002 2534-6002 3505-8034 3505-8134 34
40 3417-6000 3417-6600 3448-3040 3490-4 3442-9 3443-94 3432-5502 3432-5602 3432-6502 3432-6602 2540-5002 2540-6002 3505-8040 3505-8140 40
50 3425-6000 3425-6600 3448-3050 3490-5 3442-9 3443-94 3433-5502 3433-5602 3433-6502 3433-6602 2550-5002 2550-6002 3505-8050 3505-8150 50
60 3334-6000 3334-6600 3448-3060 3490-6 3442-9 3443-94 3372-5502 3372-5602 3372-6502 3372-6602 2560-5002 2560-6002 60
64 7964-6500EC 3448-7964 3490-6 3442-9 3443-94 3764-6502 3764-6602 2564-5002 2564-6002 64
APPROVALS UL / CSA
Keying plug : 3435-0000
Polarisation key : 3518
Polarisation key : 3518
Long snap-in latch : 3505-33
Polarisation post : 3201-3
Mounting screw : 3341-5
30µ” gold plating 30µ” gold plating 30µ” gold plating
www.3m.com/interconnects/ www.TEPRO.sk
Socket
2 2
10 89110-0101 HA 3448-89110 3490-89110 3442-9 3443-107N 2510-5002 UG 2510-6002 UG 8510-4500 JL 10
14 89114-0101 HA 3448-89114 3490-89110 3442-9 3443-107N 2514-5002 UG 2514-6002 UG 14
16 89116-0101 HA 3448-89116 3490-89110 3442-9 3443-107N 2516-5002 UG 2516-6002 UG 8516-4500 JL 16
20 89120-0101 HA 3448-89120 3490-89110 3442-9 3443-107N 2520-5002 UG 2520-6002 UG 5120-B7A2 JL 8520-4500 JL 9120-4500 JL 20
24 89124-0101 HA 3448-89124 3490-89124 3442-9 3443-107N 24
26 89126-0101 HA 3448-89126 3490-89124 3442-9 3443-107N 2526-5002 UG 2526-6002 UG 5126-B7A2 JL 8526-4500 JL 9126-4500 JL 26
30 89130-0101 HA 3448-89130 3490-89124 3442-9 3443-107N 30
34 89134-0101 HA 3448-89134 3490-89124 3442-9 3443-107N 2534-5002 UG 2534-6002 UG 5134-B7A2 JL 8534-4500 JL 9134-4500 JL 34
36 36
40 89140-0101 HA 3448-89140 3490-89140 3442-9 3443-107N 2540-5002 UG 2540-6002 UG 5140-B7A2 JL 8540-4500 JL 9140-4500 JL 2340-5111 TG 2340-6111 TG 40
50 89150-0101 HA 3448-89150 3490-89140 3442-9 3443-107N 2550-5002 UG 2550-6002 UG 5150-B7A2 JL 8550-4500 JL 9150-4500 JL 50
60 89160-0101 HA 3448-89160 3490-89140 3442-9 3443-107N 5160-B7A2 JL 8560-4500 JL 60
64 8564-4500 JL 64
72 72
80 2380-5121 TG 2380-6121 TG 80
2.54 x 2.54 mm Interconnection Systems type DIN 41651Wiremount / Boardmount Sockets - Boardmount Headers / Pin Strips
10 11
SOCKET / HEADER CONNECTORS TYPE DIN 41651 BOARDMOUNT SOCKET CONNECTORS PIN STRIP
89XXX-HA Series Sockets25XX-UG Series
Low Profile Headers51XXSeries
85XXSeries
91XXSeries
23XX Series
Strainrelief
Pulltab
PlatenLocator
plateRight angleLP Header
StraightLP Header
Right angleBM Socket
StraightBM Socket
StraightBM Socket
Right anglePin Strip
StraightPin Strip
Pincount Pincount
APPROVALS UL / CSA
Keying plug : 3435-0000
(2 row) (2 row)
(1 row) (1 row)
- HA : 15µ” gold plating - UG : 15µ” gold plating - TG : 10µ” gold plating- JL : 12µ” gold plating- 10 : 10µ” gold plating
Polarisation key : 3518
Long snap-in latch : 3505-33
Height: 10,8 mm Height: 9 mm
www.3m.com/interconnects/ www.TEPRO.sk
Plugwith
mounting flanges
2.54 mm Intra-Cabinet Interconnection Systems (PLUG, PCB)Wiremount connectors for intra-cabinet interconnections between printed circuit boards
12 13
PLUG CONNECTORS PCB CONNECTORS
46XX Series 39XX Series (2 row) 3XXX Series (4 row)
Plugwithout
mountingflanges
Plugwith
long ejectors
Strainrelief
Pulltab
PlatenLocator
platePCB
2 piecesPCB
pre-assembledStrainrelief
PlatenLocator
platePCB Platen
Locatorplate
Pincount Pincount
APPROVALS UL / CSA
- T : Tin plating - VZB : Tin plating
Short latch / ejector : 3505-16
Long latch / ejector : 3505-17
Polarisation key : 3518
30µ” gold plating
10 4610-6050 4610-6051 3448-4610 3490-1 3442-9 3443-96 3910-2000 T 3910-2010 T 3448-3910 3442-9 3443-71 3474-0005 VZB 3442-9 3443-15 10
14 4614-6000 4614-6001 3448-4614 3490-2 3442-9 3443-96 3914-2000 T 3914-2010 T 3448-3914 3442-9 3443-71 14
16 4616-6000 4616-6001 4616-6300 3448-4616 3490-2 3442-9 3443-96 3916-2000 T 3916-2010 T 3448-3916 3442-9 3443-71 3721-0005 VZB 3442-9 3443-16 16
20 4620-6000 4620-6001 4620-6300 3448-4620 3490-2 3442-9 3443-96 3920-2000 T 3920-2010 T 3448-3920 3442-9 3443-71 3422-0005 VZB 3442-9 3443-16 20
26 4626-6000 4626-6001 3448-4626 3490-3 3442-9 3443-96 3926-2000 T 3926-2010 T 3448-3926 3442-9 3443-71 3434-0005 VZB 3442-9 3443-15 26
30 3930-2010 T 3448-3930 3442-9 3443-71 30
34 4634-6000 4634-6001 4634-6300 3448-4634 3490-4 3442-9 3443-96 3934-2000 T 3934-2010 T 3448-3934 3442-9 3443-71 3402-0005 VZB 3442-9 3443-15 34
40 4640-6000 4640-6001 3448-4640 3490-4 3442-9 3443-96 3940-2000 T 3940-2010 T 3448-3940 3442-9 3443-71 3418-0005 VZB 3442-9 3443-16 40
50 4650-6000 4650-6001 4650-6300 3448-4650 3490-5 3442-9 3443-96 3950-2000 T 3950-2010 T 3448-3950 3442-9 3443-71 3426-0005 VZB 3442-9 3443-15 50
60 4660-6000 4660-6001 3448-4660 3490-6 3442-9 3443-96 3960-2000 T 3448-3960 3442-9 3443-71 60
64 4664-6000 4664-6001 3448-4664 3490-6 3442-9 3443-96 3964-2000 T 3964-2010 T 3448-3964 3442-9 3443-71 64
www.3m.com/interconnects/ ww.TEPRO.sk
14 3406-3000 3406-3002 3406-3010 T 3448-3406 3490-1 3442-21 3443-74 14
16 3416-3000 3416-3002 3416-3010 T 3448-3416 3490-1 3442-22 3443-75 16
18 3563-3000 3563-3010 T 3448-3563 3490-1 3442-23 3443-76 18
20 3461-0001 3442-30 3443-63 20
24 3460-4000 3460-4002 3460-4000 T 3448-25 3490-2 3442-26 3443-79 24
26 3462-0001 3442-30 3443-63 26
34 3463-0001 3442-30 3443-63 34
40 3508-4000 3508-4002 3508-4000 T 3448-18 3490-3 3442-28 3443-81 3464-0001 3442-30 3443-63 40
50 3415-0001 3442-30 3443-63 50
64 62B64-1000 EF 62B64-1001 EF 3448-6201* 3490-6 3442-9 3443-117 64
64 62C64-1100 EF 62C64-1101 EF 3448-6201* 3490-6 3442-9 3443-117 64
64 3695-0000 3448-3695 3490-6 3442-9 3443-91 64
96 62C96-1200 EF 62C96-1201 EF 3448-6201* 3490-6 3442-9 3443-117 96
DIPRectangular pins
Gold plated
2.54 mm Intra-Cabinet Interconnection Systems (DIP, CARD-EDGE, DIN 41612)Wiremount connectors for intra-cabinet interconnections between printed circuit boards
14 15
DIP CONNECTORS CARD-EDGE CONNECTORS DIN 41612 STYLE CONNECTORS
3XXX Series 34XX Series 62XXX and 36XX Series
PincountDIP
Round pinsGold plated
DIPRectangular pins
Tin plated
Strainrelief
Pulltab
PlatenLocator
plateCard-Edge Platen
Locatorplate
Socket withoutmounting
flanges
Socket withmounting
flangesPlug
Strainrelief
Pulltab
Platen Locatorplate
Pincount
APPROVALS UL/CSA
Polarising key : 3439-2
62B64 - 2 row body (A/B)
62C64 - 3 row body (A/C)
62C96 - 3 row body (A/B/C)
Keying plug : 3435-0000
Handle (For Euro connector withmounting flanges) : 3395
*Strain Relief (For Euro connector withoutmounting flanges) : 3448-6201
- EF : 20µ” gold plating- T : Tin plating 30µ” gold plating
www.3m.com/interconnects/ www.TEPRO.sk
17
8 SMC33-08-A-1-TR
8 SMC33-08-SMT-1-TR
68MCH-068TAR1-03LPK-TR30
(Stacked, right ejector)
68MCH-068TAN-03LPK-TR30
(Single, right ejector)
68MCH-068TAN-07LPH-TR30
(Single, no ejector)
68MCH-068TAN-01A-TR40
(Standard profile, no ejector)
136MCH-136TALR1-24LPK-TR30
(Stacked, right ejector)
8 MP2-HP08-41P1-TG30 MP2-SP08-41M1-TG30
10 MP2-HP10-51P1-TG30 MP2-SP10-51M1-TG30
24 MP2-H024-41P1-S-TG30 MP2-S024-41M1-C-TG30
30 MP2-H030-51P1-S-TG30 MP2-S030-51M1-C-TG30
96 DIN-96CPC-S1-TR DIN-96CSC-S1L-TR
96 DIN-96CPC-SR1-TR DIN-96CSC-PSL-TR
96 DIN-96RPC-PS-TR DIN-96RSC-SR1-TR
150 MP2-H150-41P1-S-TG30 MP2-S150-41P1-S-TG30
240 MP2-H240-51P1-S-TG30 MP2-S240-51M1-C-TG30
Backplane PCMCIA / Memory Card Connectors
16
Futurebus+ two piece 2mm pitch backplane connector system available in 4 and 5 row housings up to 480 contactmonoblocks. Signal and Power connectors are industry standard and inverse stacking solutions are available upon
request with a wide range of terminations.
DIN standard connectors are 2 piece backplaneconnectors on 2.54mm (0.100") pitch, with pin countsup to 150 positions. This series uses RN flexpress, "eye
of the needle" technology for press fit termination.
8 position smart card connector with switch toISO format and through hole or SMT tails.
Other standard connectors or custom connectorsare available upon request.
Right angle headers single or double stacking toconnect with PCMCIA card kits. Headers utilise
either long or short guide rails as well as avariety of eject mechanisms and other options
such as ESD clips, PCB holddowns and spacers.
METPAK 2 SIGNAL METPAK 2 POWER DIN 41612
Headers
Press Fit
Sockets
Solder
Headers
Press Fit
Sockets
SolderHeaders Sockets
No. of
Contacts
APPROVALS
For Type 1 Compact Flash
Standard Profile(6.4 mm)
HEADER SMART CARD CONNECTOR PCMCIA
For Type 2 Compact Flash
SURFACE MOUNT HEADERS
N7E50 - 7516 VY - 20 N7E50 - E516 VY - 30 N7E50 - 7516 HG - 50
7 : Normal polarisation E : Normal polarisation 7 : Normal polarisation
A : Inverse polarisation A : Inverse polarisation A : Inverse polarisation
Ejector : Ejector : Ejector :
D7E50 - 7316 - 03 D7E50 - 8316 - 03 7E50 - 9316 - 04
(for normal version)
Retainer Clip :
3505 - 34 7E50 - A316 - 04
(for inverse version)
Low Profile(4.0 mm)
WithStandoffs
WithoutStandoffs
No. ofContacts SMC MCH
www.3m.com/interconnects/ www.TEPRO.sk
D-Submale
9 8209-6009 8209-7009 8209-8009 8209-6003 3448-8D09A 3490-1 3485-2100F 3357-6509 3357-9209 3442-39N 3443-106N 9
9 8309-6009 8309-7009 8309-8009 8309-6003 3448-8D09A 3490-1 3485-2100F 3357-6509 3357-9209 3442-9 3443-106N 9
15 8215-6009 8215-8009 8215-6003 3448-8D15A 3490-1 3485-2200F 3357-6515 3357-9215 3442-39N 3443-106N 15
15 8315-6009 8315-7009 8315-8009 8315-6003 3448-8D15A 3490-1 3485-2200F 3357-6515 3357-9215 3442-9 3443-106N 15
25 8225-6009 8225-7009 8225-8009 8225-6003 3448-8D25A 3490-2 3485-2300F 3357-6525 3357-9225 3442-41N 3443-106N 25
25 8325-6009 8325-7009 8325-8009 8325-6003 3448-8D25A 3490-2 3485-2300F 3357-6525 3357-9225 3442-9 3443-106N 25
37 8237-6009 8237-7009 8237-8009 8237-6003 3448-8D37A 3490-4 3485-2400F 3357-6537 3357-9237 3442-41N 3443-106N 37
37 8337-6009 8337-7009 8337-8009 8337-6003 3448-8D37A 3490-4 3485-2400F 3357-6537 3357-9237 3442-9 3443-106N 37
50 8250-6005 3448-8D50A 3490-5 3357-9250 3442-47 3443-100 50
50 8350-6005 3448-8D50A 3490-5 3357-9250 3442-37 3443-100 50
Input / Output Inteconnection Systems (D-SUB)Wiremount and boardmount connectors for I/O applications
18 19
D-SUB (Delta) CONNECTORS
8XXX Series
PincountD-Subfemale
D-Sub maleclosed-end
cover
D-Sub femaleclosed-end
cover
D-Submale
pre-assembled
D-Subfemale
pre-assembled
D-Sub malewith 4-40 UNC
inserts
D-Sub femalewith 4-40 UNC
inserts
Strainrelief
Pulltab
Shellplastic
flat cable
Shell (60°)metallised
round cable
Shellmetal
round cablePlaten
Locatorplate
Pincount
APPROVALS UL / CSA
3505-62
3505-62
Jack socket kit (panel mounting) : 3341-1S Jack socket kit (panel mounting) : 3341-1L
Jack socket kit (panel mounting) : 3341-4 Jack screw kit (used without junction shell) : 3342-1
Jack screw kit (used with 3485-2X00 shells) : 3342-2 Thumb screw kit (used with 3357-92XX shells) : 3341-7
30µ” gold plating
www.3m.com/interconnects/ www.TEPRO.
PincountDelta Ribbon
female
18 10114-6000 EL 10314-3210-000 10114-300-VE 10214-5212 JL 18
20 10120-6000 EL 10320-3210-000 10320-A200-00 10120-3000 VE 10320-52A0-008 10320-52F0-008 10220-5212 JL 10220-52B2 JL 10220-6212 JL 10220-1210 VE 10220-55G3 VC 20
24 3549-1000 3548-1001 3448-61 3490-2 24
26 10126-6000 EL 10326-3210-000 10326-A200-00 10326-A500-00 10126-3000 VE 10326-52A0-008 10326-52F0-008 10226-5212 JL 10226-52B2 JL 10226-6212 JL 10226-1210 VE 10226-55G3 VC 26
36 3366-1001 3448-62 3490-3 10136-6000 EL 10336-3210-000 10336-A200-00 10336-A500-00 10136-3000 VE 10336-52A0-008 10336-52F0-008 10236-5212 JL 10236-52B2 JL 10236-6212 JL 10236-55G3 VC 36
50 3565-1000 3564-1001 3564-1002 3448-63 3490-5 10150-6000 EL 10350-3210-000 10350-A200-00 10350-A500-00 10150-3000 VE 10350-52A0-008 10350-52F0-008 10250-5212 JL 10250-52B2 JL 10250-6212 JL 50
68 10168-6000 EL 10368-3210-000 10368-A200-00 10368-A500-00 10268-5212 JL 10268-52B2 JL 10268-6212 JL 68
100 101A0-6000 EL 103A0-A200-00 102A0-5212 JL 102A0-52B2 JL 102A0-6212 JL 100
• IEEE 1284 Cable Assemblies
• High Speed Digital TransmissionAssemblies according toVESA/DFPsupporting TMDS/LVDS technology
20 21
Jack socket kit (panel mounting) : 3341-2
Screw mount kit (used with screw mount connector) : 3342-3
Bail mount kit (used with bail mount connector)
Front panel mounting : 3475-1
Rear panel mounting : 3475-4
Input / Output Interconnection Systems (DELTA RIBBON, MINI DELTA RIBBON)Wiremount and boardmount connectors for I/O applications
DELTA RIBBON (Centronics) CONNECTOR MINI DELTA RIBBON CONNECTOR
35XX Series101XXX Series
IDC Wiremount Plugs101XXX Series
Solder Wiremount Plugs102XXX Boardmount Receptacles
Delta Ribbonmale
bail mount
Delta Ribbonmale
screw mount
Strainrelief
Pulltab
PlugPlastic
shieldedshell
Metalshell
Metalshell (60°)
Plugsolder
Plasticshielded
shell (screw)
Plasticshielded
shell (latch)
ReceptacleRight angle
ReceptacleGround locksRight angle
Receptaclestraight
ReceptacleSMT
Right angle
ReceptacleHigh Temp.Right angle
Pincount
APPROVALS
- VE : 20µ” gold plating
- EE : 20µ” gold plating- EL : 12µ” gold plating
- VE : 20µ” gold plating- JL : 12µ” gold plating
Platen : 3442-9Locator plate : 3443-58
30µ” gold plating
Assembly handtool (20-68 pos) : 3829
Non-shielding plug 68 pos : 10168-8000EE
UL/CSA
www.3m.com/interconnects/ www.TEPRO.sk
68 2S68-0000 GG 3448-2S68 3490-9 3443-125
Mating cables: 3749-68 (solid)3749-68 FS (solid)3756-68 (stranded)3756-68 FS (stranded)
SCSI 3 Cable AssembliesFor applications that demand multi-tasking at high speeds(high performance computers, workstations, servers, RAIDunits), 3M can offer a cost-effective cable assembly.
With different cable constructions, we can meet differentrequirements in impedance of the Fast 20 or SCSI 3specifications.
With or without strain relief. With or without pull tab.
Series 1880
Storage Device Interface SolutionsSCSI 3 connector
22 23
SCSI 3 CONNECTOR
2S68 Series
Pincount ConnectorStrainrelief
Pulltab
Locatorplate
(incl. platen)
- GG : 15µ” gold plating
www.3m.com/interconnects/ www.TEPRO.sk
Part number 3756-XX 3849-XX 3365-XX 2010-XX 3801-XX 3302-XX 3319-XX 3539-XX 1700-XX 3782-XXP-270A 3476-XX 3517-XX 3759-XX 3783-XXP-540A
Application Standard applications High flex life application High speed applications EMI/ESD protected Protected Input/Output
Conductor spacing (mm) 0.635 0.85 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27
Conductor type Stranded Stranded Stranded Stranded Stranded Stranded 19 strands 19 strands Stranded Stranded Stranded Stranded Stranded Strandedsilver plated tinned copper One drain
copper
Conductor size 30 AWG 30 AWG 28 AWG 28 AWG 26 AWG 28 AWG 28 AWG 28 AWG 28 AWG 28 AWG 28 AWG 28 AWG 28 AWG 28 AWG
Insulation material TPE PVC PVC Halogen free organic PVC PVC PVC PVC PVC PVC PVC PVC PVC PVCthermoplastic
Colour Grey Grey Grey Tan Grey 10 colour repeat Black Grey 10 colour repeat 10 colour repeat Grey Black jacket Black jacket Grey jacketGrey cable Grey cable 10 colour repeat
First conductor marking Blue Red Red None Red Brown Grey Red Brown Brown Blue Red Red Brown
Insulation resistance (Ω / 3m) > 1 x 1010 > 1 x 1010 > 1 x 1010 > 1 x 1010 > 1 x 1010 > 1 x 109 > 1 x 1010 > 1 x 1010 > 1 x 1010 > 1 x 109 > 1 x 1010 > 1 x 1010 > 1 x 1010 > 1 x 1010
Conductor quantity 50, 60, 68 96 9, 10, 14, 15, 16, 10, 14, 16, 20, 25, 10, 14, 16, 20, 26, 9, 10, 14, 16, 10, 14, 16, 20, 24, 10, 14, 16, 20, 26, 10, 16, 26, 34, Pairs 16, 20, 26, 16, 20, 26, 34, 9, 10, 20, 25,26, Pairs80, 100 20, 24, 25, 26, 34, 26, 34, 37, 40, 50, 34, 40, 50, 64 20, 25, 26, 34, 26, 34, 40, 50, 64 34, 40, 50, 64 40, 50, 64 5p, 7p, 8p, 10p, 34, 50 37, 40, 50, 64 34, 40, 50, 64 13p, 17p, 25p
37, 40, 50, 60, 64 60, 64 37, 40, 50, 60, 64 13p, 17p, 20p,25p, 32p
Length (m) 91.44 91.44 30.48 / 91.44 30.48 30.48 30.48 30.48 30.48 30.48 30.48 30.48 30.48 30.48 / 91.44 76.20
Impedance (Ω) unbalanced 82 89 108 107 89 105 107 106 100 100 65 70 90 90
Capacitance (pF/m) unbalanced 56.8 57.4 42.0 45.9 53.1 46.3 43.6 43.8 52 53 82.3 70.5 54.8 87
Inductance (µH/m) unbalanced 0.39 0.46 0.50 0.53 0.43 0.49 0.49 0.49 0.52 0.54 0.36 0.36 0.46 0.56
Propagation delay (ns/m) unbalanced 4.66 5.12 4.59 4.92 4.72 4.82 4.66 4.64 5.3 5.1 5.4 4.95 4.92 6.0
Voltage rating (v) 150 300 300 30 300 300 300 300 UL 300 300 UL 300 NEC 725, CL2 NEC 725, CL2 300CSA 150 CSA 150 CSA 300 CSA 300
Temperature rating (°C) -40 +105 -20 +105 -20 +105 -40 +105 -20 +105 UL -20 +105 -20 +105 -20 +105 UL -20 +105 -20 +80 -20 +105 -20 +80 -20 +80 -20 +80CSA -20 +80 CSA -20 +80
APPROVALS UL E42769/ UL E42769/ UL E42769/ UL E42769/ UL E42769/ UL E42769/ UL E42769/ UL E42769/ UL E42769/ UL E65859/ UL E42769/ UL E118773 UL E118773 UL E65859/20297 2651 2651 20930 2651 2776 2651 2651 20462 20488 2682 CL2 (AWM CL2 (AWM 2935
CSA option CSA option CSA option CSA option CSA option CSA option CSA option CSA option CSA option Style 20879) Style 20267)LL53469 LL53649 LL53649 LL53469 LL53646 LL53649 LL53649 LL53649 LL53649 CSA LL53649 CSA LL53649
Unbalanced is measured between ground - signal - ground conductors
CablesA complete line of cable types, including standard round conductor, colour coded, ground plane with and without drain wire, extended flex life, mass terminatable twisted pair, jacketed, shielded/jacketed, pleated foil and round jacketed configurations.
Jacketed,shieldedflat cable
Round,jacketedflat cable
Round,jacketed twistedpair flat cable
Twistedpair
flat cable
Groundplanecable
Extendedflex life
flat cable
Colourcoded
flat cableRound conductor flat cableProperties
24 25
I/O interconnections interconnections
www.3m.com/interconnects/ www.TEPRO.sk
Part Number 3659-XX 3784-XXP-540A 79984-XXP-270A KU-C-KMPVV- 3444C-XX
Application EMI / ESD protected I/O interconnections
Conductor spacing (mm) 1.27 1.27 1.27 Discrete wire Discrete wire
Conductor type Stranded Stranded Stranded Stranded Stranded
Conductor size 28 AWG 28 AWG 28 AWG 28 AWG 28 AWG
Insulation material PVC PVC Non halogen type, PVC PVCflame retardant,
polyethylene
Colour Black jacket Grey jacket Cream Grey Cream jacket Cream jacketGrey cable 10 colour repeat Black & White colour coded colour coded
colour coded
First conductor marking Red Brown Black Black/Pink Blue/White
Insulation resistance (Ω / 3m) >1 x 1010 >1 x 1010 >1 x 1010 >1 x 109 >1 x 1010
Conductor quantity 9, 10, 14, 15, 16 (540A) Pairs Pairs Pairs 10, 14, 20, 26, 36,20, 25, 26, 34, 36, 5p, 7p, 8p, 10p,13p 5p, 7p, 8p, 10p, 7p, 10p, 13p,18p, 40, 50, 68, 10037, 40, 50, 60, 64 17p, 20p, 25p, 30p, 32p 13p, 17p, 20p, 20p, 25p, 34p
(270A) 5p, 8p, 13p 25p, 30p, 32p
Length (m) 30.48 / 91.44 76.20 100 100 50m/100 conductors100m/36-68 conductors
150m/26 conductors200m/10-20 conductors
Impedance (Ω) unbalanced 65 90 84 54 50
Capacitance (pF/m) unbalanced 81.4 87 61 110 111.5
Inductance (µH/m) unbalanced 0.36 0.56 0.42 0.32 0.26
Propagation delay (ns/m) unbalanced 5.28 6.0 5.1 5.9 5.51
Voltage rating (v) NEC 725, CL2 300 30 30 30CSA 300
Temperature rating (°C) -20 +80 -20 +80 -20 +60 -20 +60 -20 +60
APPROVALS UL E118773 UL E65859/ UL E65859/ UL E42769/CL2 (AWM 2935 2789 2789Style 20267)
CSA LL53649
Unbalanced is measured between ground - signal - ground conductors
Cables (cont.)
PropertiesRound,
jacketed shieldedflat cable
Round, jacketed, shieldedtwisted pair flat cable
Round, jacketed, shieldedtwisted pair cable
26
SB28-XXP
Press
Platen
Hand Press
27
Locator Plate
Cable Cutter
Accessories
LocatorPlate
Press
Platen
Pull Tab
Cable
Strain Relief
Connector
3640 Standard Assembly Press
Assembly Tooling & Accessories
3784-XXP-270A
Reference Description
3698-08 Assembly hand tool for Socket connectors
(10 - 50 pos.)
3710 Assembly hand tool for D-Sub connectors
(9 - 37 pos.)
3829 Assembly hand tool for Mini Delta
Ribbon connectors (14 - 68 pos)
and KU-C-KM or 3444C cable
Reference Description
3614 Flat Cable Cutter
Replacement anvils (3 ca.) : 3614-1
3320 Cable Shear
Used to cut measured lengths of 3M
Flat Cable (in combination with the
3640 press).
Replacement cutting blades: 3449-6
Replacement cutting board: 3457-8
Reference Description
3484-1000 Cable Clamp
Organises cable routing by clamping and
retaining up to 6 layers of flat cable.
3490-XX Pull Tab - see connector sections to
define the mating pull tab
3448-XX Strain Relief - see connector sections to
define the mating strain relief.
3767-0005 Staging Platform
Provide easy transfer of pre-assembled
Socket connectors (891XX series) to
assembly nest area. Designed to fit
3443-107N locator plate.
Reference Description
3640 Standard Assembly Press
Used to assemble all 3M Cables and
Connectors (except discrete wiring).
The press is shipped with the 3442-9
platen and the 3436-1A shut height gauge.
3335 Heavy Duty Assembly Press
Reference Description
3442-XX Platen - see connector sections to define
the needed platen
Reference Description
3443-XX Locator Plate - see connector sections
to define the needed locator plate.
www.3m.com/interconnects/ www.TEPRO.sk
3M™ Textool™ IC Production Sockets
32 33
3M™ TEXTOOL ™ IC PRODUCTION SOCKETS
Sockets for through hole devices (DIP) or SMT packages (PLCC, PQFP, LCCC)
www.3m.com/interconnects/ www.TEPRO.sk
Link na Internet - kliknite: www.3m.com/interconnects/
Sockets for through hole devices (DIP) or SMT packages (PLCC, PQFP, LCCC
3M Static control www.3M.com/market/electronic/ehpd/
Link na Antistatick® materi§ly - kliknite: www.3M.com/market/electronic/ehpd/
P§sky izolaļn® (PVC), vulknizaļn®, kovov® (Cu, Al) a ġpeci§lne (pre izol§cie vynut² cievok - polyester, sklo, filament...)
www.TEPRO.sk www.3m.com