Device Net Statement of Conformance V1.000 SOC.pdfProduction trigger(s) Cyclic COS App. trig. Transport type(s) Server Client Transport class(es) 0 2 3 ID Description Get Set Value

DeviceNet Statement of Conformance

SOC data as of 1 - 12 - 2004

Fill in the blank or X the appropriate box

General Conforms to DeviceNet Specification Volume I - Release 2 Volume II - Release 2 Device Data Vendor Name Industrial Control Communications, Inc.

Device Profile Name Communications AdapterProduct Name DNET-100 Network GatewayProduct Catalog Number 2Product Revision 1.1

DeviceNet Physical Network Power Consumption (Max) 0.02 A @ 11V dc (worst case)Conformance Data

Connector Style Open-Hardwired Sealed-MiniOpen-Pluggable X Sealed-Micro

Isolated Physical Layer Yes XNo

LEDs Supported Module X Combo Mod/Net None Network X I/O

MAC ID Setting DIP Switch X Software SettableOther

Default MAC ID 0

Communication Rate Setting DIP Switch X Software SettableOther

Communication Rates Supported 125k bit/s X 500k bit/s X250k bit/s X

DeviceNet Device Network Behavior Group 2 Client Group 2 Only ClientCommunication Check All That Apply Group 2 Server Group 2 Only Server XData Peer-To-Peer Tool (not a Device)

UCMM Explicit Message Groups Supported Group 1 Group 2 Group 3 Dynamic I/O Message Groups (Peer to Peer) Group 1 Group 2 Group 3

Default I/O Data Address Path Input: Class 4 Inst. 150 Attr. 3Output: Class 4 Inst. 100 Attr. 3

Fragmented Explicit Messaging Supported Yes X No If yes, Acknowledge TimeOut 0 ms

Typical Target AddressesConsumption Service 16 Class 1 Inst. 1 Attr. 7Production Service 14 Class 1 Inst. 1 Attr. 7

1 of 12


DeviceNet Identity Object 0x01Required Object Class ID Description Get Set Value LimitsObject Attributes Open 1 Revision XImplementation 2 Max instance X

None Supported 3 Number of Instances4 Optional attributes list5 Optional services list6 Max Id of class attributes7 Max Id of instance attributesDeviceNet Services Parameter Options

Services Get_Attributes_AllX Reset 0,1

None Supported X Get_Attribute_SingleFind_Next_Object_instance

Object Instance ID Description Get Set Value LimitsAttributes Open 1 Vendor X =(721)

2 Device type X =(12)3 Product code X =(2)4 Revision X =(1.1)5 Status (bits supported) X6 Serial number X7 Product name X DNET-100 Network Gateway

8 State9 Config. Consistency Value

10 Heartbeat IntervalDeviceNet Services Parameter Options

Services Get_Attributes_AllX Reset 0,1X Get_Attribute_Single

Set_Attribute_Single


DeviceNet Message Router Object 0x02Required Object Class ID Description Get Set Value LimitsObject Attributes Open 1 Revision XImplementation 2 Max instance

None Supported 3 Number of Instances4 Optional attribute list5 Optional service list6 Max ID of class attributes7 Max ID of instance attributesDeviceNet Services Parameter Options

Services Get_Attributes_AllX Get_Attribute_Single

None SupportedObject Instance ID Description Get Set Value LimitsAttributes Open 1 Object list

2 Maximum connections supporteX None Supported 3 Number of active connections

4 Active connections listDeviceNet Services Parameter Options

Services Get_Attributes_AllGet_Attribute_Single

X None Supported Set_Attribute_Single

Vendor Specific AdditionsYes If yes, fill out the Vendor Specific Additions form. No XX Get indicates attribute value is returned by the Get_Attribute_Single serviceX Set indicates attribute value is written to by the Set_Attribute_Single service 3 of 12


DeviceNet DeviceNet Object 0x03Required Object Class ID Description Get Set Value LimitsObject Attributes Open 1 Revision XImplementation 2 Max instance

None Supported 3 Number of Instances4 Optional attribute list5 Optional service list6 Max ID of class attributes7 Max ID of instance attributesDeviceNet Services Parameter Options

Services X Get_Attribute_Single None Supported

Object Instance ID Description Get Set Value LimitsAttributes Open 1 MAC ID X

2 Baud rate X None Supported 3 BOI X X

4 Bus-off counter X X5 Allocation information X6 MAC ID switch changed7 Baud rate switch changed8 MAC ID switch value9 Baud rate switch value

DeviceNet Services Parameter OptionsServices X Get_Attribute_Single

X Set_Attribute_Single None Supported X Allocate M/S connection set

X Release M/S connection set


DeviceNet Connection Object 0x05Required Object Class ID Description Get Set Value LimitsObject Attributes Open 1 Revision XImplementation None Supported

DeviceNet Services Parameter OptionsServices Reset

Create None Supported Delete

X Get_Attribute_SingleFind_Next_Object_Instance

Object Instance Predefined M/S Connections Peer to Peer Connections Max InstancesComplete the Object Instance sect Explicit Message X Explicit Message Totalfor each Instance type supported. Polled Server ClientIndicate Production trigger, Bit Strobed Dynamic I/O TotalTransport type and Transport Change of State Server ClientClass supported for Dynamic I/O. Cyclic

Production trigger(s) Cyclic COS App. trig.Transport type(s) Server ClientTransport class(es) 0 2 3ID Description Get Set Value Limits

Attributes Open 1 State X2 Instance type X3 Transport Class trigger X4 Produced connection ID X5 Consumed connection ID X6 Initial comm. characteristics X7 Produced connection size X8 Consumed connection size X9 Expected packet rate X X

12 Watchdog time-out action X X13 Produced connection path lengtX14 Produced connection path X15 Consumed connection path lengX16 Consumed connection path X17 Production inhibit time XDeviceNet Services Parameter Options

Services X ResetDeleteApply_Attributes

X Get_Attribute_SingleX Set_Attribute_Single







Object Instance Predefined M/S Connections Peer to Peer Connections Max InstancesComplete the Object Instance sect Explicit Message Explicit Message Totalfor each Instance type supported. Polled X Server ClientIndicate Production trigger, Bit Strobed Dynamic I/O TotalTransport type and Transport Change of State Server ClientClass supported for Dynamic I/O. Cyclic



12 Watchdog time-out action X X13 Produced connection path lengtX14 Produced connection path X15 Consumed connection path lengX16 Consumed connection path X17 Production inhibit time XDeviceNet Services Parameter Options









Object Instance Predefined M/S Connections Peer to Peer Connections Max InstancesComplete the Object Instance sect Explicit Message Explicit Message Totalfor each Instance type supported. Polled Server ClientIndicate Production trigger, Bit Strobed Dynamic I/O TotalTransport type and Transport Change of State X Server ClientClass supported for Dynamic I/O. Cyclic



12 Watchdog time-out action X X13 Produced connection path lengtX14 Produced connection path X15 Consumed connection path lengX16 Consumed connection path X17 Production inhibit time X XDeviceNet Services Parameter Options









Object Instance Predefined M/S Connections Peer to Peer Connections Max InstancesComplete the Object Instance sect Explicit Message Explicit Message Totalfor each Instance type supported. Polled Server ClientIndicate Production trigger, Bit Strobed Dynamic I/O TotalTransport type and Transport Change of State Server ClientClass supported for Dynamic I/O. Cyclic X



12 Watchdog time-out action X X13 Produced connection path lengtX14 Produced connection path X15 Consumed connection path lengX16 Consumed connection path X17 Production inhibit time X XDeviceNet Services Parameter Options





DeviceNet Assembly Object 0x04Required Object Class ID Description Get Set Value LimitsObject Attributes Open 1 Revision XImplementation None Supported 2 Max instance

3 Number of Instances4 Optional attribute list5 Optional service list6 Max ID of class attributes7 Max ID of instance attributesDeviceNet Services Parameter Options

Services CreateDelete

None Supported X Get_Attribute_SingleObject Instance Instance Type Instance Id(s)The Object Instance section Static Input X 150151must be completed for each Static Outputinstance type implemented. Static I/O

Static Configuration Dynamic

ID Description Get Set Value LimitsAttributes Open 1 Number of members in list

2 Member list None Supported 3 Data X

DeviceNet Services Parameter OptionsServices Delete

X Get_Attribute_Single None Supported Set_Attribute_Single

Get_MemberSet_MemberInsert_MemberRemove_Member



DeviceNet Assembly Object 0x04Required Object Class ID Description Get Set Value LimitsObject Attributes Open 1 Revision XImplementation None Supported 2 Max instance



None Supported X Get_Attribute_SingleObject Instance Instance Type Instance Id(s)The Object Instance section Static Inputmust be completed for each Static Output X 100101instance type implemented. Static I/O

Static Configuration Dynamic

ID Description Get Set Value LimitsAttributes Open 1 Number of members in list

2 Member list None Supported 3 Data X X

DeviceNet Services Parameter OptionsServices Delete

X Get_Attribute_Single None Supported X Set_Attribute_Single

Get_MemberSet_MemberInsert_MemberRemove_Member



DeviceNet Parameter Object 0x0FRequired Object Class ID Description Get Set Value LimitsObject Attributes Open 1 Revision XImplementation 2 Max instance X

None Supported 3 Number of Instances4 Optional attribute list5 Optional service list6 Max ID of class attributes7 Max ID of instance attributes8 Parameter class descriptor X9 Configuration assembly instanc X10 Native languageDeviceNet Services Parameter Options

Services Get_Attributes_AllReset

None Supported X Get_Attribute_SingleSet_Attribute_SingleRestore Save

Object Instance ID Description Get Set Value LimitsAttributes Open 1 Parameter value X X

2 Link Path size X None Supported 3 Link path X

4 Descriptor X5 Data type X6 Data size X7 Parameter name string X8 Units string X9 Help string X

10 Minimum value X11 Maximum value X12 Default value X13 Scaling multiplier X14 Scaling divisor X15 Scaling base X16 Scaling offset X17 Multiplier link X18 Divisor link X19 Base link X20 Offset link X21 Decimal precision XDeviceNet Services

Services Get_Attribute_All None Supported X Get_Attribute_Single X Set_Attribute_Single



DeviceNet Acknowledge Handler Object 0x2BRequired Object Class ID Description Get Set Value LimitsObject Attributes Open 1 RevisionImplementation X None Supported 2 Max instance



X None Supported Get_Attribute_SingleObject Instance Section Information Max Instance IDThe Object Instance section Instance type Static Xmust be completed for each Dynamicinstance type implemented.

ID Description Get Set Value LimitsAttributes Open 1 Acknowledge Timer X X

2 Retry Limit X X None Supported 3 COS Producing Conn. Inst. X 4 Ack List Size 5 Ack List 6 Data with Ack Path List

7 Data with Ack Path ListDeviceNet Services Parameter Options

Services DeleteGet_Attribute_Single

X None Supported Set_Attribute_SingleAdd_Ack_Data_PathDelete_Ack_Data_Path

Vendor Specific AdditionsYes If yes, fill out the Vendor Specific Additions form. No XX Get indicates attribute value is returned by the Get_Attribute_Single serviceX Set indicates attribute value is written to by the Set_Attribute_Single service. 12 of 12

Documents

Device Net Statement of Conformance V1.000 SOC.pdfProduction trigger(s) Cyclic COS App. trig. Transport type(s) Server Client Transport class(es) 0 2 3 ID Description Get Set Value