Click here to load reader
Upload
bendickinson
View
42
Download
0
Embed Size (px)
Citation preview
Development of the magazine
As you can see my finished product is on the right and the there are many differences like the picture is completely different because I used a fill in picture to start off with because I didn’t have a model at the present time. The writing is different because I did the fonts and correct placement towards the end as a few ‘tweeks’ to make it better.
As you can see my final product is the right. I made a lot of changes throughout this page being produced like the main article picture because I had trouble getting models for it and using the final product picture was much easier. I also changed the layout because I thought when I was making the on e on the left it didn’t really look like a professional magazine so I went back and looked through my research and found that there were some magazines structured like the one on the right so I tried that out and it looks much better. I also added a lot more writing because otherwise it would have too short.
My double page spread needed more pictures to make it look less bland and boring, so I added more pictures and colours (whilst sticking to the colour scheme in my style sheet) which gave me my final product. I think it changed a lot from the initial design. It is much more colourful and the article is much longer giving the reader more information.