detail architecture

8/18/2019 detail architecture

1/8

APPENDIX A

Standards Titles

The following list gives the full title of the industry standards that are referred to in the text

by number designation only.

AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)( WWW .ASTM.ORG)

A 6/A 6M Standard Specification for General Requirements for Rolled Structural Bars, Plates,

Shapes, and Sheet Piling

A 36/A 36M Standard Specification for Carbon Structural Steel

A 82/A 82M Standard Specification for Steel Wire, Plain, for Concrete Reinforcement

A 153/A 153M Standard Specification for Zinc Coating (hot-dip) on Iron and Steel Hardware

A 167A Standard Specification for Stainless and Heat-resisting Chromium-Nickel Steel Plate, Sheet,

and Strip

A 185/A 185M Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete

A 240/A 240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate,

Sheet, and Strip for Pressure Vessels and for General Applications

A 615/A 615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete

Reinforcement.

A 641/A 641M Standard Specification for Zinc-coated (Galvanized) Carbon Steel Wire

A 653/A 653M Standard Specification for Sheet Steel, Zinc-coated (Galvanized) or Zinc-Iron

Alloy-coated (Galvannealed) by the Hot-dip Process

A 951/A 951M Standard Specification for Steel Wire for Masonry Joint Reinforcement

B 69 Standard Specification for Rolled Zinc

B 209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

B 221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire,

Profiles and Tubes

B370 Standard Specification for Copper Sheet and Strip for Building Construction

C 33 Standard Specification for Concrete Aggregates

C 62 Standard Specification for Building Brick (Solid masonry units made from clay or shale)

C 90 Standard Specification for Load Bearing Concrete Masonry Units

C 144 Standard Specification for Aggregate for Masonry Mortar

C 150 Standard Specification for Portland Cement

C 171 Standard Specification for Sheet Materials for Curing Concrete

C 206 Standard Specification for Finishing Hydrated Lime

415

Architect’s Handbook of Construction Detailing, Second Edition

by David Kent Ballast

Copyright © 2009 John Wiley & Sons, Inc.


2/8

416 A p p e n d i x A

C 207 Standard Specification for Hydrated Lime for Masonry Purposes

C 208 Standard Specification for Cellulosic Fiber Insulating Board

C 216 Standard Specification for Facing Brick (Solid masonry units made from clay or shale)

C 270 Standard Specification for Mortar for Unit Masonry

C 475/A 475M Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum

Board

C 476 Standard Specification for Grout for Masonry

C 503 Standard Specification for Marble Dimension Stone

C 514 Standard Specification for Nails for the Application of Gypsum Wallboard

C 516 Standard Specification for Vermiculite Loose Fill Thermal Insulation

C 549 Standard Specification for Perlite Loose Fill Insulation

C 553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and

Industrial Applications

C 568 Standard Specification for Limestone Dimension Stone

C 578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

C 591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal

Insulation

C 612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation

C 615 Standard Specification for Granite Dimension Stone

C629 Standard Specification for Slate Dimension Stone

C 635/C 635M Standard Specification for the Manufacture, Performance, and Testing of Metal

Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

C 636/C 636M Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical

Tile and Lay-In Panels

C 645 Standard Specification for Nonstructural Steel Framing Members

C 652 Standard Specification for Hollow Brick (Hollow masonry units made from clay or shale)

C 661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a

Durometer

C 665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame

Construction and Manufactured Housing

C 726 Standard Specification for Mineral Fiber Roof Insulation Board

C 728 Standard Specification for Perlite Thermal Insulation Board

C 739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal InsulationC 754 Standard Specification for Installation of Steel Framing Members to Receive Screw-attached

Gypsum Wallboard Products

C 755 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation

C 764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

C 834 Standard Specification for Latex Sealants

C 836 Standard Specification for High Solids Content, Cold Liquid-applied Elastomeric

Waterproofing Membrane for Use with Separate Wearing Course


3/8

A p p e n d i x A 417

C 840 Standard Specification for Application and Finishing of Gypsum Board

C 847 Standard Specification for Metal Lath

C 920 Standard Specification for Elastomeric Joint Sealants

C 926 Application of Portland Cement-Based Plaster

C 955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks),

and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

C 991 Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings

C 1002 Standard Specification for Steel Self-piercing Tapping Screws for the Application of Gypsum

Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

C 1007 Specification for the Installation of Load Bearing (Transverse and Axial) Steel Studs and

Related Accessories

C 1014 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing

Insulation

C 1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

C 1036 Standard Specification for Flat Glass

C 1048 Standard Specification for Heat Treated Flat Glass—Kind HS, Kind FT Coated and

Uncoated Glass

C 1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation

C 1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

C 1177 Glass Mat Gypsum Board

C 1184 Standard Specification for Structural Silicone Sealants

C 1193 Standard Guide for Use of Joint Sealants

C 1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant

Glazing ApplicationsC 1278 Standard Specification for Fiber-Reinforced Gypsum Panel

C 1280 Standard Specification for Application of Gypsum Sheathing

C 1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation

C 1299 Standard Guide for Use in Selection of Liquid-Applied Sealants

C 1320 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for

Light Frame Construction

C 1382 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior

Insulation and Finish Systems (EIFS) Joints

C 1386 Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction

Units

C 1396 Standard Specification for Gypsum Board

C 1397 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems

C 1401 Standard Guide for Structural Sealant Glazing

C 1452 Standard Specification for Reinforced Autoclaved Aerated Concrete Elements

C 1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant

Joint Width


4/8


C 1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

C 1516 Standard Practice for Application of Direct-Applied Exterior Finish Systems

C 1535 Standard Practice for Application of Exterior Insulation and Finish Systems Class PI

C 1555 Standard Practice for Autoclaved Aerated Concrete Masonry

C 1564 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

D 41 Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing

D 226 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

D 312 Standard Specification for Asphalt Used in Roofing

D 1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

D 1863 Standard Specification for Mineral Aggregate Used on Built-Up Roofs

D 1970 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used

as Steep Roofing Underlayment for Ice Dam Protection

D 2178 Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

D 2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and

Extrusion Compounds

D 2626 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in

Roofing

D 3737 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated

Timber (Glulam)

D 4068 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed

Water-Containment Membrane

D 4434 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

D 4397 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural

ApplicationsD 4551 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed

Water-Containment Membrane

D 4601 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

D 4637 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

D 4811 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

D 4869 Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope

Roofing

D 6152 Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing

D 6162 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet

Materials Using a Combination of Polyester and Glass Fiber Reinforcements


Materials Using Glass Fiber Reinforcements


Materials Using Polyester Reinforcements

D 6222 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials

Using Polyester Reinforcements


5/8


D 6223 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials

Using a Combination of Polyester and Glass Fiber Reinforcements

D 6298 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified

Bituminous Sheets with a Factory Applied Metal Surface

D 6380 Standard Specification for Asphalt Roll Roofing (Organic Felt)

D 6509 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet

Materials Using Glass Fiber Reinforcements

D 6878 Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

E 96/E 96M Standard Test Methods for Water Vapor Transmission of Materials

E 108 Standard Test Methods for Fire Tests of Roof Coverings

E 119 Standard Methods of Fire Tests of Building Construction and Materials

E 283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows,

Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

E 330 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and

Curtain Walls by Uniform Static Air Pressure Difference E 331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and

Curtain Walls by Uniform Static Air Pressure Difference

E 547 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and

Curtain Walls by Cyclic Static Air Pressure Difference

E 580/E 580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile

and Lay-in Panels in Areas Subject to Earthquake Ground Motions

E 773 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units

E 779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization

E 936 Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof

Insulation, and Bituminous Built-Up-Roofing

E 1155 Standard Test Method for Determining F F Floor Flatness and F L Floor Levelness Numbers

E 1667 Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed

Building Walls

E 1966 Standard Test Method for Fire-Resistive Joint Systems

E 2112 Standard Practice for Installation of Exterior Windows, Doors and Skylights

E 2178 Standard Test Method for Air Permeance of Building Materials

E 2190 Standard Specification for Insulating Glass Unit Performance and Evaluation

E 2430 Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use

in Exterior Insulation and Finish Systems (“EIFS”)

AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) ( WWW .ANSI.ORG)

A 17.1 Safety Code for Elevators and Escalators

A108/A118/A136.1 Specifications for the Installation of Ceramic Tile

American National Standard Specifications A108. .1A, .1B, .1C, .4, .5, .6, .8, .9, .10, .11,

.12, and .13 define the installation of ceramic tile. A118.1, .3, .4, .5, .6, .7, .8, .9, .10,


6/8


and A136.1 define the test methods and physical properties for ceramic tile installation

materials.

A 108.1A Ceramic Tile Installed in the Wet-Set Method with Portland Cement Mortar

A 108.1B Ceramic Tile Installed on a Cured Portland Cement Mortar Setting Bed with Dry-Set or

Latex-Portland Cement Mortar

A 108.5 Installation of Ceramic Tile with Dry-Set Portland Cement Mortar or Latex-Portland

Cement Mortar

A 108.10 Installation of Grout in Tilework

A 118.1 Specifications for Dry-set Portland Cement Mortar

A 118.4 Specifications for Latex-Portland Cement Mortar

A 118.6 Specifications for Standard Ceramic Tile Grouts for Tile Installation

A 118.10 Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimension

Stone Installation

A 118.12 Specifications for Crack Isolation Membranes for Thin-Set Ceramic Tile and Dimension

Stone InstallationsA 137.1 Ceramic Tile

A156.115 Hardware Preparation in Steel Doors and Steel Frames

A156.115W Hardware Preparation in Wood Doors with Wood or Steel Frames

A 190.1 Structural Glued Laminated Timber—Production Requirements for Glulam

Z 97.1 Safety Glazing Materials Used in Buildings—Safety Performance Specifications and Methods

of Test

AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)( WWW .AAMANET.ORG)

AAMA/WDMA/CSA 101/I.S. 2/A440 North American Fenestration Standard/Specification for

Windows, Doors, and Skylights

AAMA 303 Voluntary Specification for Rigid Polyvinyl Chloride (PVC) Exterior Profiles

AAMA 308 Voluntary Specification for Cellular Polyvinyl Chloride (PVC) Exterior Profiles

AAMA 501.4 Recommended Static Test Method for Evaluating Curtain Wall and Storefront Systems

Subjected to Seismic and Wind Induced Interstory Drifts

AAMA 508 Voluntary Test Method and Specification for Pressure-Equalized Rain-Screen Wall

Cladding Systems

AAMA 611 Voluntary Standards for Anodized Architectural Aluminum

AAMA 701/702 Voluntary Specification for Pile Weatherstrip and Replaceable Fenestration

Weatherseals

AAMA 711 Guideline for Application of Self-Adhering Flashing Used for the Installation of

Fenestration Products

AAMA 800 Voluntary Specifications and Test Methods for Sealants

AAMA 910-XX Voluntary “Life Cycle” Specifications and Test Methods for Architectural

Aluminum Storefront and Entrance Manual (under development)


7/8


AAMA 2603 Voluntary Specification, Performance Requirements and Test Procedures for Pigmented

Organic Coatings on Aluminum Extrusions and Panels

AAMA 2605 Voluntary Specification, Performance Requirements and Test Procedures for Superior

Performing Organic Coatings on Aluminum Extrusions and Panels

AMERICAN CONCRETE INSTITUTE (ACI) ( WWW .CONCRETE.ORG)ACI 117 Specifications for Tolerances for Concrete Construction and Materials and Commentary

ACI 301 Specifications for Structural Concrete

ACI 318 Building Code Requirements for Structural Concrete

ACI 530/530.1 Building Code Requirements & Specification for Masonry Structures and Related

Commentaries

ACI 530.1/ASCE 6/TMS 602 Specification for Masonry Structures

AMERICAN INSTITUTE OF TIMBER CONSTRUCTION (AITC)( WWW .AITC-GLULAM.ORG)

AITC 112 Standard for Tongue-and-Groove Heavy Timber Roof Decking

AITC 113 Standard for Dimensions of Structural Glued Laminated Timber

AITC 117 Standard Specifications for Structural Glued Laminated Timber of Softwood

Species—Design Requirements

ANSI/AITC A190.1 Structural Glued Laminated Timber—Production Requirements for Glulam

APA—THE ENGINEERED WOOD ASSOCIATION ( WWW .APAWOOD.ORG)

PRP-108 Performance Standards and Qualification Policy for Structural-Use Panels

PS 2 Performance Standard for Wood-Based Structural-Use Panels

CONSUMER PRODUCTS SAFETY COMMISSION (CPSC) ( WWW .CPSC.GOV )

16 CFR 1201 Safety Standard for Architectural Glazing Materials

FACTORY MUTUAL ( WWW .FMGLOBAL.COM)

FM 4450 Approval Standard for Class 1 Insulated Steel Roof Decks

FM 4470 Approval Standard for Class 1 Roof Covers

GLASS ASSOCIATION OF NORTH AMERICA ( WWW .GLASSWEBSITE.COM)

GANA Engineering Standards Manual

GANA Fully Tempered Heavy Glass Door and Entrance Systems Design Guide

GANA Glazing Manual

FGMA Sealant Manual

G YPSUM ASSOCIATION (GA) ( WWW .GYPSUM.ORG)

GA-214 Recommended Levels of Gypsum Board Finish

GA-216 Specifications for the Application and Finishing of Gypsum Panel Products


8/8


GA-226 Application of Gypsum Board to Form Curved Surfaces

GA-600 Fire Resistance Design Manual

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) ( WWW .NFPA.ORG)

80 Standard for Fire Doors and Windows

252 Standard Methods of Fire Tests of Door Assemblies (Same as UL 10B)

257 Standard on Fire Test for Window and Glass Block Assemblies

SINGLE-PLY ROOFING INSTITUTE (SPRI) ( WWW .SPRI.ORG)

ANSI/SPRI RP-4 Wind Design Standard for Ballasted Single-ply Roofing Systems

ANSI/SPRI WD-1 ANSI/SPRI Wind Design Standard Practice for Roofing Assemblies

Application Guidelines for Self Adhered Thermoplastic and Thermoset Roofing Systems

STEEL DOOR INSTITUTE (SDI) ( WWW .STEELDOOR.ORG)

ANSI/SDI A250.8 Recommended Specifications for Standard Steel Doors & FramesSDI 108 Recommended Selection & Usage Guide for Standard Steel Doors

SDI 111 Recommended Selection & Usage Guide for Standard Details, Steel Doors, Frames, and

Accessories

SDI 122 Installation & Troubleshooting Guide for Standard Steel Doors & Frames

UNDERWRITERS LABORATORIES (UL) ( WWW .UL.COM)

UL 10B Standard for Safety for Fire Tests of Door Assemblies (Same as NFPA 252)

UL 10C Standard for Safety for Positive-Pressure Fire Tests of Door Assemblies

UL 580 Test for Uplift Resistance of Roof Assemblies

UL 790 Tests for Fire Resistance of Roof Covering Materials

UL 1256 Fire Test of Roof Deck Construction

UL 1784 Standard for Safety for Air Leakage Tests for Door Assemblies

UL 1897 Uplift Tests for Roof Covering Systems

UL 2079 Standard for Safety for Tests for Fire Resistance of Building Joint Systems

W INDOW AND DOOR MANUFACTURERS ASSOCIATION (WDMA)( WWW . WDMA.COM)

ANSI/WDMA I.S.1-A Architectural Wood Flush Doors

AAMA/WDMA/CSA 101/I.S.2/A440 Standard/Specification for Windows, Doors and Unit

Skylights

I.S. 6 Industry Standard for Wood Stile and Rail Doors

I.S. 6A Industry Standard for Architectural Stile and Rail Doors

Documents

detail architecture