Desktop – Technical Specifications - Icsilicsil.in/wp-content/.../2013/04/Final-Technical-Specificati… · Web viewPolaris office (Free) to create and edit all Microsoft Word

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________

Request for Proposal (RFP)

For

Empanelment of Vendors

For

Supply of IT Hardware, Software & other Peripherals under the

Rate Contract

Volume – 2 of 2

Technical Specifications-----------------------------------------------------------------------------------------------------------------

Intelligent Communication Systems India Ltd. (ICSIL)

(Joint Venture of TCIL - A Govt. of India Enterprise & DSIIDC – An undertaking of Delhi Government)

Administrative Building, 1st Floor, Above Post Office,Okhla Indl. Estate, Ph. - III, New Delhi – 110 020Phone: 011-26929051, 26830338, Fax: 26830347,

E-mail: [email protected], www.icsil.in

Page 1 of 355

http://www.icsil.in/

mailto:[email protected]


Contents1. Desktop – Technical Specifications..............................................................................................10

1.1 Entry Level Desktop.....................................................................................................................10

1.1.1 Item Code Intel/i3-3220/1.....................................................................................................10

1.1.2 Item Code AMD/A6/2............................................................................................................12

1.1.3 Intel Code AMD/A8/3............................................................................................................14

1.1.4 Item Code Intel/All-In-One/i3-3220/4..................................................................................16

1.2 Middle Level Desktop..................................................................................................................18

1.2.1 Item Code Intel/i5-3570/1.....................................................................................................18

1.2.2 Item Code Intel/i5-3470/2.....................................................................................................20

1.2.3 Item Code AMD/A10/3.........................................................................................................22

1.2.4 Item Code Intel/All-In-One/i5-3470/4..................................................................................24

1.3 High Level Desktop......................................................................................................................26

1.3.1 Item Code Intel/i7-3770/1.....................................................................................................26

1.3.2 Item Code Intel/i7-3820QM/2..............................................................................................28

2. Laptops – Technical Specifications..............................................................................................30

2.1 Entry Level...............................................................................................................................30

2.1.1 Item Code Intel/i3-31xxM/1..................................................................................................30

2.1.2 Item Code Intel/Celeron-B830/2..........................................................................................32

2.1.3 Item Code Intel/Celeron-B970/3..........................................................................................34

2.2 Middle Level.............................................................................................................................36


2.2.2 Item Code Intel/i5-35xxK/2...................................................................................................38

2.2.3 Item Code Intel/i5-35xxS/3...................................................................................................40


2.3 High Level................................................................................................................................44

2.3.1 Item Code Intel/i7-3520M/1.................................................................................................44



3. Computer Notebook.......................................................................................................................50

3.3.1 Item Code Intel/Atom N-2600/1...............................................................................................50

3.3.2 Item Code AMD/A8-4500M/2..................................................................................................51

Page 2 of 355


3.3.3 Item Code AMD/APU E- 350/3................................................................................................52

3.3.4 Item Code Intel/i3-3110M/4.....................................................................................................53

4. Tablet – Technical Specifications.................................................................................................54

4.1 Item Code Tablet/Android ICS/1...........................................................................................54

4.2 Item Code Tablet/Android Sandwich/2.................................................................................56

4.3 Item Code Tablet/ 32GB/3.....................................................................................................57

4.4 Item Code Tablet/ 64GB/4.....................................................................................................58

5. iPAD – Technical Specifications...................................................................................................59

5.1 iPAD-2, 16GB with Wi-Fi.............................................................................................................59

5.2 iPAD-2, 16GB with Wi-Fi + 3G...................................................................................................62

5.3 iPAD-3, 16GB with Wi-Fi.............................................................................................................65

5.4 iPAD-3 32 GB with Wi-Fi.............................................................................................................68

5.5 iPAD-3 64 GB with Wi-Fi.............................................................................................................71

5.6 iPAD-3 16 GB with Wi-Fi + Cellular...........................................................................................74

5.7 iPAD-3, 32 GB with Wi-Fi + Cellular..........................................................................................77

5.8 iPAD-3, 64 GB with Wi-Fi + Cellular..........................................................................................80

6. Scanners – Technical Specifications............................................................................................83

6.1 Item Code DSCAN/1....................................................................................................................83

6.2 Item Code DSCAN/2....................................................................................................................84

6.3 Item Code DSCAN/3....................................................................................................................85

6.4 Item Code DSCAN/4....................................................................................................................86

6.5 Item Code DSCAN/5....................................................................................................................87

6.6 Item Code DSCAN/6....................................................................................................................88

6.7 Item Code DSCAN/7....................................................................................................................89

6.8 Item Code DSCAN/8....................................................................................................................90

6.9 Item Code DSCAN/9....................................................................................................................91

6.10 Item Code DSCAN/10...........................................................................................................92

7. Printer – Technical Specifications.................................................................................................93

7.1 Laser Printers................................................................................................................................93

7.1.1 Item Code LP/Mono/1...........................................................................................................93

7.1.2 Item Code LP/Mono/2...........................................................................................................94

7.1.3 Item Code LP/Mono/3...........................................................................................................95

Page 3 of 355


7.1.4 Item Code LP/Mono/4...........................................................................................................96

7.1.5 Item Code LP/Mono/5...........................................................................................................97

7.1.6 Item Code LP/Mono/6...........................................................................................................98

7.1.7 Item Code LP/Mono/7...........................................................................................................99

7.1.8 Item Code LP/Mono/8.........................................................................................................100

7.1.9 Item Code LP/Mono/9.........................................................................................................101

7.1.10 Item Code LP/Mono/10....................................................................................................102

7.1.11 Item Code LP/Mono/11....................................................................................................103

7.1.12 Item Code LP/Mono/12....................................................................................................104

7.1.13 Item Code LP/Mono/13....................................................................................................105

7.1.14 Item Code LP/Color/14.....................................................................................................106





7.2 Inkjet Printer................................................................................................................................111

7.2.1 Item Code Inkjet/1...............................................................................................................111

7.2.2 Item Code Inkjet/2...............................................................................................................112

7.2.3 Item Code Inkjet/3...............................................................................................................113

7.2.4 Item Code Inkjet/4...............................................................................................................114

7.2.5 Item Code Inkjet/5...............................................................................................................115

7.3 Dot Matrix Printer.......................................................................................................................116

7.3.1 Item Code DMP/1................................................................................................................116

7.3.2 Item Code DMP/2................................................................................................................117

7.3.3 Item Code DMP/3................................................................................................................118

7.3.4 Item Code DMP/4................................................................................................................119

7.3.5 Item Code DMP/5................................................................................................................120

7.3.6 Item Code DMP/6................................................................................................................121

7.3.7 Item Code DMP/7................................................................................................................122

7.4 Line Matrix Printers....................................................................................................................123

7.4.1 Item Code LMP/1................................................................................................................123

7.4.2 Item Code LMP/2................................................................................................................124

Page 4 of 355


7.4.3 Item Code LMP/3................................................................................................................125

7.4.4 Item Code LMP/4................................................................................................................126

7.5 Multifunction Mono Printer........................................................................................................127

7.5.1 Item Code MFP/Mono/1.....................................................................................................127






7.6 Multifunction Color Laser Printer..............................................................................................133

7.6.1 Item Code MFP/Color/1......................................................................................................133





7.7 Fargo Printers.............................................................................................................................138

7.7.1 Item Code FP/Mod/1...........................................................................................................138

7.7.2 Item Code FP/Mod/2...........................................................................................................139

7.7.3 Item Code FP/Mod/3...........................................................................................................140

7.8 Network Printer cum Fax...........................................................................................................141

7.9 Industrial Laser Printer..............................................................................................................142

7.10 Other Printers...........................................................................................................................143

8. UPS – Technical Specifications..................................................................................................144

8.1 Online UPS with isolation transformer.....................................................................................144

8.1.1Item Code Online/UPS 10KVA/1........................................................................................144

8.1.2 Item Code Online/UPS 10KVA/2......................................................................................145







Page 5 of 355


8.1.9 Item Code Online/UPS 10KVA/9.................................................................................152

8.1.10 Item Code Online/UPS 15KVA/10..................................................................................153


















8.1.28 Item Code Online/UPS 1.0KVA/28.................................................................................171













Page 6 of 355







8.2 Online UPS (Solid State)...........................................................................................................189

8.2.1 Item Code Online/UPS 1.0KVA/1.....................................................................................189














8.3 Line - Interactive UPS – Technical Specifications.................................................................203

8.3.1 Item Code Line-Int/UPS 0.5KVA/Single Phase/1...........................................................203



8.4.4 Item Code Line-Int/UPS 0.65KVA/Single Phase/4.........................................................206



8.4.7 Item Code Line-Int/UPS 0.8 KVA/Single Phase/7..........................................................209



8.4.10 Item Code Line-Int/UPS 1.0 KVA/Single Phase/10......................................................212


Page 7 of 355






8.5 Other One (1) KVA.....................................................................................................................218

8.6 Other UPS (5KVA to 10 KVA)..................................................................................................220

9. Barcode Scanner – Technical Specification..............................................................................222

9.1 Hand Held type Laser Scan System........................................................................................222

9.2 Hand Held type Image Scan System.......................................................................................223

9.3 Other Barcode Scanner.............................................................................................................224

10. Barcode Printer.........................................................................................................................225

11. Racks – Sample Technical Specifications.............................................................................226

11.1 9 U Rack....................................................................................................................................226

11.2 Different Type of 42 U Rack...................................................................................................227

12. Surveillance System – Technical Specifications...................................................................228

12.1 Analog Box Camera.................................................................................................................228

12.2 Analog PTZ Camera................................................................................................................229

12.3 IP Dome Camera.....................................................................................................................230

12.4 IP PTZ Camera.........................................................................................................................231

12.5 DVR 4 channel.........................................................................................................................232

12.6 DVR 8 channel.........................................................................................................................233

12.7 DVR 16 channel.......................................................................................................................234

12.8 DVR 32 channel.......................................................................................................................235

12.9 Surveillance System Accessories..........................................................................................236

13. Switches – Technical Specifications......................................................................................237

13.1 12 Core Switch.........................................................................................................................237

13.2 12 Distribution Switch – Fixed Configuration........................................................................244

13.3 8 port Layer 2 Managed Switch Non- POE..........................................................................251

13.4 12 Port Switch..........................................................................................................................256

13.5 24 Port Switch..........................................................................................................................258

13.3 48 Port Switch..........................................................................................................................261

14. Router – Technical Specifications..........................................................................................264

Page 8 of 355


14.1 Router – Entry Level................................................................................................................264

14.2 Router – Mid Level...................................................................................................................267

14.3 Router – High Level.................................................................................................................270

15. Leased Line Modem Pair – Technical Specifications...........................................................277

16. KVM Switches – Technical Specifications.............................................................................278

16.1 High Performance KVM...........................................................................................................278

16.2 Desktop KVM............................................................................................................................279

17. Load Balancer – Technical Specifications.............................................................................280

17.1 Load Balancer I.......................................................................................................................280

17.2 Load Balancer II.......................................................................................................................281

18. Thin Client – Technical Specifications...................................................................................283

19. Intrusion Prevention System (IPS) – Technical Specifications................................................284

19.1 Entry Level IPS.........................................................................................................................284

19.2 High Level IPS..........................................................................................................................285

20. Server – Technical Specifications................................................................................................286

20.1 Low End Server........................................................................................................................286

20.2 High End Server.......................................................................................................................287

20.3 Database server.......................................................................................................................288

20.4 Xeon Server..............................................................................................................................290

20.5 EPIC Based Server..................................................................................................................293

20.6 Rack Server..............................................................................................................................295

20.7 Tower Server Entry Level........................................................................................................298

21. Biometric Device............................................................................................................................305

21.1 Single Fingerprint capture.......................................................................................................305

21.2 Dual Fingerprint capture..........................................................................................................306

21.3 Other Biometric Access Control.............................................................................................307

21.4 Biometric Attendance System................................................................................................308

21.5 Hand Held Biometric Device...................................................................................................309

22. Smart Card Access Control..........................................................................................................310

23. LCD TV full HD – Technical Specification...................................................................................311

23.1 32” Full HD................................................................................................................................311

23.2 40” Full HD................................................................................................................................312

Page 9 of 355


23.3 42” Full HD................................................................................................................................313

24. LED TV full HD – Technical Specification...................................................................................314

24.1 32” Full HD................................................................................................................................314

24.2 40” Full HD................................................................................................................................315

24.3 42” Full HD................................................................................................................................316

25. Passive Components – Technical Specification........................................................................317

26. Wi-Fi Access Point.........................................................................................................................332

27. Antivirus...........................................................................................................................................334

28. Optional (Additional) Items............................................................................................................335

29. Tape Library....................................................................................................................................339

30. System Software, Packaged Software, Patented Software, Proprietary Software and Antivirus.................................................................................................................................................341

31. Portable Scanners – Technical Specifications...........................................................................343

31.1 A4 Portable Scanner................................................................................................................343

31.2 A4-Color Portable Scanner.....................................................................................................344

31.3 A3 Portable Scanner................................................................................................................345

32. Air-Conditioners

32.1 Windows Airconditioners

32.2 Split Airconditionders

Page 10 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________1. Desktop – Technical Specifications

1.1 Entry Level Desktop

1.1.1 Item Code Intel/i3-3220/1

S. No. Features Specifications Specifications offered by the OEM / Vendor

Compliance (Y/N)

1. Make Please Specify

2. Model Tower Model

3. Processor Intel® Core™ i3-3220 Processor (3M Cache, 3.30 GHz) or better

4. Mother Board OEM Motherboard

5. Chipset Intel H61 Chipset or better

6. RAM 4GB (2*2GB) DDR3 UDIMM Memory, 1600 MHz, ECC

7. HDD 500GB (7200 RPM) 3.5” SATA Hard Drive

8. Optical Drive 22X SATA DVD Writer

9. Graphics Integrated Graphics

10. Audio High Definition Audio Card

11. Ethernet Integrated 10M/100M/1000M Gigabit Ethernet

12. Ports FRONT: (2) USB 2.0; Microphone, Headphone

REAR: (4) USB 2.0; (2) USB 3.0; (2) PS2; (1) VGA; (1) RJ45; (1) Serial; (1) Audio line in/out

13. Power Supply 250 Watt ATX Power Supply – PFC (Active Power Factor Correction). Surge protected.

14. Keyboard Full-size Slim OEM Keyboard (USB)

15. Monitor 18.5” LED Monitor, Maximum resolution -1366x768

16. Mouse USB 2.0 Optical Mouse (same make as PC)

17. Operating System

Windows 8 Professional / Linux, with update/patches over a period of 5 years.

Page 11 of 355



Compliance (Y/N)

18. Compliance and Certification

Energy Star 5.2 Configured

19. Antivirus MacAfee/ Norton/ Kaspersky/ Quickheal/ eScan/ Bitdefender Internet Security (Latest version) with Media & 1 Year Subscription (OEM Support, Updates, Patches)

20. Dust Cover Quality dust cover for Monitor, CPU, Keyboard, Mouse

Page 12 of 355


1.1.2 Item Code AMD/A6/2


Compliance (Y/N)



3. Processor AMD A6 5400K, 3.4 GHz, with 1 MB Cache or Higher

4. Mother Board AMD A Series/nvidia GE Force A series or higher

5. RAM 4GB (2*2GB) DDR3 UDIMM Memory, 16 GB Expandable






11. Ports FRONT: (2) USB 2.0; Microphone, Headphone REAR: (4) USB 2.0; (2) USB 3.0; (2) PS2; (1) VGA; (1) RJ45; (1) Serial; (1) Audio line in/out

12. Power Supply 250 watt ATX Power Supply – PFC (Active Power Factor Correction). Surge protected.








Page 13 of 355



Compliance (Y/N)



Page 14 of 355


1.1.3 Intel Code AMD/A8/3


Compliance (Y/N)



3. Processor AMD A8 5500, 3.4 GHz 4 Core, with 4 MB Cache or Higher

4. Mother Board AMD A Series/nvidia GE Force A series or higher

5. RAM 4GB (2*2GB) DDR3 UDIMM Memory 1600 MHz, 16 GB Expandable














17. Compliance and


Page 15 of 355



Compliance (Y/N)

Certification



Page 16 of 355


1.1.4 Item Code Intel/All-In-One/i3-3220/4


Compliance (Y/N)




4. Chipset Intel 6 series express chipset or higher







11. Ports (2) USB 2.0; (2) USB 3.0; (2) PS2; (1) VGA; (1) RJ45; (1) Serial; (1) Audio line in/out

12. Wireless Communication

Bluetooth 3.0, IEE 802.11 b/g/n

13. Power Supply Internal 150 W 85% Auto sensing


15. Display 54.6 cm (21.5 inch) Wide LED 16:9 (1600x900)or better Digital Color Monitor- Energy Star compliant.




18. Compliance and


Page 17 of 355



Compliance (Y/N)

Certification



Page 18 of 355


1.2 Middle Level Desktop



Compliance (Y/N)



3. Processor Intel® Core™ i5-3570 Processor (6M Cache, 3.30 GHz or better)


5. Chipset Intel 7 Series Chipset or better

6. RAM 8GB (2*4GB) expandable upto 16 GB DDR3 UDIMM Memory, 1600 MHz, ECC









15. Monitor 18.5” LED Monitor, Maximum resolution -1366x768 with TCO 05 certified and of same make as PC




Page 19 of 355



Compliance (Y/N)





Page 20 of 355




Compliance (Y/N)



3. Processor Intel® Core™ i5-3470 Processor (6M Cache, 3.20 GHz or better)

4. Chipset Intel Q77 or better










14. Monitor 18.5” LED Monitor, Maximum resolution -1366x768 with TCO 05 certified and of same mak'e as PC






Page 21 of 355



Compliance (Y/N)



Page 22 of 355


1.2.3 Item Code AMD/A10/3


Compliance (Y/N)



3. Processor AMD A10 5700, 3.4 GHz 4 Core, with 4 MB Cache or Higher

4. Chipset A series Chipset or Higher

5. RAM 4GB (2*2GB) DDR3 UDIMM Memory 1600 MHz, 16 GB Expandable








12. Power Supply 250 watt ATX Power Supply – PFC ( Active Power Factor Correction ). Surge protected.








Page 23 of 355



Compliance (Y/N)



Page 24 of 355


1.2.4 Item Code Intel/All-In-One/i5-3470/4


Compliance (Y/N)




4. Chipset Intel 6 series express chipset or higher







11. Ports (2) USB 2.0; (2) USB 3.0; (2) PS2; (1) VGA; (1) RJ45; (1) Serial; (1) Audio line in/out

12. Wireless Communication

Bluetooth 3.0, IEE 802.11 b/g/n

13. Power Supply Internal 150 W 85% Auto sensing


15. Display 54.6 cm (21.5 inch) Wide LED 16:9 (1600x900)or better Digital Color Monitor- Energy Star compliant.




18. Compliance and


Page 25 of 355



Compliance (Y/N)

Certification



Page 26 of 355


1.3 High Level Desktop



Compliance (Y/N)



3. Processor Intel® Core™ i7-3770 processor (8M Cache, 3.40 GHz or better)

4. Chipset Intel Q77 Chipset or better














17. Compliance and


Page 27 of 355



Compliance (Y/N)

Certification



Page 28 of 355


1.3.2 Item Code Intel/i7-3820QM/2


Compliance (Y/N)



3. Processor Intel® Core™ i7-3820QM processor (8M Cache, 3.30 GHz or better)


5. Chipset Intel 6 Series Chipset or better














18. Compliance and


Page 29 of 355



Compliance (Y/N)

Certification



Page 30 of 355


2. Laptops – Technical Specifications

2.1 Entry Level

2.1.1 Item Code Intel/i3-31xxM/1


Compliance (Y/N)


2. Processor Intel® Core™ i3-31xxM Processor or better

3. Chipset Intel 7 Series Chipset

4. Memory 2GB RAM expandable up to 8GB

5. HDD 500GB (7200 RPM) SATA Hard Drive

6. Optical Drive DVD Writer


8. Display Display 14.0” / 15.6” HD Wide LED Anti Glare Display (1366*768)

9. Audio / Visual SRS Premium Sound; Integrated Stereo Speaker; Integrated Microphone; Stereo Headphone

10. Communication

Gigabit Ethernet Network; Wireless LAN: 802.11/b/g/n and Bluetooth 3.0

11. Keyboard Spill resistant keyboard; min 86 keys keyboard

12. Pointing Device

Touchpad with gesture support, On/Off button with LED indicator, two way scroll and two pick buttons



14. Battery Battery Options 6-cell (47 W Hrs), Lithium ion battery with optional long life cycle battery

15. Interfaces / Ports

Media Card Reader (1); VGA (1); HDMI (1); Stereo Microphone in (1); Stereo Headphone line out (1); Power connector (1); RJ-45

Page 31 of 355



Compliance (Y/N)

Ethernet (1); USB 2.0 (4)

16. Certifications Mandatory Certification: ISO 9001 Certified OEM, Certified on the supplied OS

17. Antivirus MacAfee/ Norton/ Kaspersky/ Quickheal/ eScan/ Bitdefender Internet Security (Latest version) With Media & 1 Year Subscription (OEM Support, Updates, Patches)

Page 32 of 355


2.1.2 Item Code Intel/Celeron-B830/2


Compliance (Y/N)


2. Processor Intel® Celeron B830

3. Chipset Intel 6 Series or better

4. Memory 2GB DDR3 RAM expandable up to 8GB




8. Display Display 14.0” / 15.6 “ HD Wide LED Anti Glare Display


10. Communication



12. Pointing Device






Media Card Reader (1); VGA (1); HDMI (1); Stereo Microphone in (1); Stereo Headphone line out (1); Power connector (1); RJ-45 Ethernet (1); USB 2.0 (4)


Page 33 of 355



Compliance (Y/N)


Page 34 of 355


2.1.3 Item Code Intel/Celeron-B970/3


Compliance (Y/N)


2. Processor Intel® Celeron B970, 2.3 GHz

3. Chipset Intel 6 Series or better

4. Memory 2GB DDR3 RAM expandable up to 8GB




8. Display Display 14.0” / 15.6 “ HD Wide LED Anti Glare Display


10. Communication



12. Pointing Device








Page 35 of 355



Compliance (Y/N)


Page 36 of 355


2.2 Middle Level



Compliance (Y/N)


2. Processor Intel® Core™ i5-32xxM Processor (3M Cache, 2.5 GHz) or better

3. Chipset Intel® 7 Series Chipset or better







10. Communication


11. Keyboard Spill resistant keyboard; 103 keys, Backlit Keyboard

12. Pointing Device







16. Certifications Mandatory Certification: ISO 9001 Certified OEM, Certified on the

Page 37 of 355



Compliance (Y/N)

supplied OS


Page 38 of 355


2.2.2 Item Code Intel/i5-35xxK/2


Compliance (Y/N)


2. Processor Intel® Core™ i5-35xxK Processor (6M Cache, 3.20 GHz) or better

3. Chipset Mobile Intel® 7 Series Chipset or better







10. Communication



12. Pointing Device








Page 39 of 355



Compliance (Y/N)

supplied OS


Page 40 of 355


2.2.3 Item Code Intel/i5-35xxS/3


Compliance (Y/N)


2. Processor Intel® Core™ i5-35xxS Processor (6M Cache, 3.20 GHz ) or better






8. Display Display 14.0” /15.6” HD Wide LED Anti Glare Display (1366*768)


10. Communication



12. Pointing Device



Genuine Windows 7 Professional 32, with update/patches over a period of 5 years.





Page 41 of 355



Compliance (Y/N)

supplied OS


Page 42 of 355




Compliance (Y/N)


2. Processor Intel® Core™ i5-33xxM Processor (3M Cache, 2.5 GHz) or better








10. Communication



12. Pointing Device








Page 43 of 355



Compliance (Y/N)


Page 44 of 355


2.3 High Level

2.3.1 Item Code Intel/i7-3520M/1


Compliance (Y/N)


2. Processor Intel® Core™ i7-3520M Processor

(6M Cache, 2.90 GHz) or better






8. Display Display 14.0” HD Wide LED Anti Glare Display (1366*768)


10. Communication



12. Pointing Device







Page 45 of 355



Compliance (Y/N)



Page 46 of 355




Compliance (Y/N)


2. Processor Intel® Core™ i7-3612QM Processor (6M Cache, 2.10 GHz) or better








10. Communication



12. Pointing Device








Page 47 of 355



Compliance (Y/N)

supplied OS


Page 48 of 355




Compliance (Y/N)


2. Processor Intel® Core™ i7-3840QM Processor (8M Cache, 3.30 GHz) or better

3. Chipset Intel® 7 Series Express Chipset







10. Communication



12. Pointing Device








Page 49 of 355



Compliance (Y/N)

supplied OS


Page 50 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________3. Computer Notebook3.3.1 Item Code Intel/Atom N-2600/1


Compliance (Y/N)


2. Processor Intel® Atom N 2600, 1.6 GHz, 1 MB Cache or Higher

3. Chipset NM 10 Express Chipset


5. HDD 500GB (5400 RPM)



8. Display 10.1” TFT

9. Communication

Wireless LAN: 802.11/b/g/n and Bluetooth 3.0

10. Keyboard Keyboard with Touch Pad



12. Battery Lithium ion battery with at least 5 Hour Backup


3 USB and 1 HDMI, 1 Headphone & Microphone,1 RJ45, 1 VGA



16. Carry Case To be Provided

Page 51 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________3.3.2 Item Code AMD/A8-4500M/2


Compliance (Y/N)


2. Processor AMD APU A8 4500M, 1.9 GHz, 4 MB L2 Cache

3. Chipset AMD A60M Chipset


5. HDD 500GB (5400 RPM)



8. Display 14” TFT or above

9. Communication







3USB,10/100/1000 Ethernet card, RGB or S-Video or VGA/HDMI, 3 in one card, Headphone, microphone.




Page 52 of 355


3.3.3 Item Code AMD/APU E- 350/3


Compliance (Y/N)


2. Processor AMD APU E-350, 1.6 GHz, Dual Core, 1 MB L2 Cache with HD 6300 graphics with 80 radeon cores.

3. Chipset A 50 M


5. HDD 500GB (5400 RPM)



8. Display 14”” TFT

9. Communication











Page 53 of 355


3.3.4 Item Code Intel/i3-3110M/4


Compliance (Y/N)


2. Processor Mobile Intel® Core i3-3110M, 2.4 GHz, with 3M Cache

3. Chipset Mobile Intel 7 Series Chipset


5. HDD 500GB (5400 RPM)



8. Display 14” TFT

9. Communication











Page 54 of 355


4. Tablet – Technical Specifications

4.1 Item Code Tablet/Android ICS/1


Compliance (Y/N)

1. Processor Dualcore 1.0GHz

2. RAM 1GB

3. Storage 16GB moviNAND (ROM) + MicroSD Slot

4. Camera 3MP FF + VGA VT

5. Video Recording

Full HD Playback@30fps, HD @ 30fps

6. Wireless WiFi 802.11 b/g/n

7. Bluetooth Bluetooth 3.0

8. Display 7.0"

9. Resolution 1024x600

10. Screen WSVGA TFT

11. Network EDGE / GPRS 850/900/1800/19003G(HSPA + 21Mbps)

12. I/O Port 3.5-mm stereo headphone mini-jack, built in stereo speaker

13. Interface USB 2.0

14. Operating system

Android OS ICS

15. Dimensions (mm)

193.7 X 122.4 X 10.5 mm

16. Weight 345 gms

17. Battery 4,000mAh, 8hrs

Warranty 1 year comprehensive warranty

18. Antivirus compatible with Juniper Mobile Security Suite

19. Free Application

Polaris office (Free) to create and edit all Microsoft Word documents (xls, doc, ppt)

Page 55 of 355



Compliance (Y/N)

20. Audio formats MP3. AAC, AMR, FLAC, MID, WMA, WVA, Vorbis

21. Video formats MPEG4, Divx, H.263, H.264, VP8

22. Others Voice call with receiver

Page 56 of 355


4.2 Item Code Tablet/Android Sandwich/2


Compliance (Y/N)

1. Display 10.1” WXGA(1280x800) TFT

2. Processor 1 GHz Dualcore Processor

3. Network HSPA+ 21Mbps 850/900/1900/2100

4. Memory 16GB User memory + 1GB (RAM) microSD (up to 32GB)

5. Camera 3MP FF + VGA VT

6. GPS A-GPS

7. Wireless Connectivity

Wi-Fi 802.11 b/g/n - WiFi Direct, BT v3.0, USB 2.0 Host

8. Dimension, Weight

256.6 x 175.3 x 9.7 mm, 588g

9. Battery capacity

7000 mAh

10. OS / Upgrade Android 4.0(Ice Cream Sandwich)

11. Messaging & SNS

Messenger(ChatON)

12. UI / Web Browser

Android + Samsung / Android Browser

13. Audio MP3, AAC, WMA, FLAC, AMR, Vorbis, RA, QCELP, EVRC

14. Video MPEG4, H.264. H.263, WMV7, WMV8, VP8, RV

15. Other Services & Applications

Readers/Game Hub

Page 57 of 355


4.3 Item Code Tablet/ 32GB/3


Compliance (Y/N)

1. Processor 1 GHz or higher

2. Memory 1 GB or higher

3. Storage 32 GB or better (internal + external micro SD card)

4. Display 9.4 inches (23.876 cm) to 10.6 inches(26.92 cm)

5. Resolution 1366X768 /1280x800 or higher.

6. Web Camera ( Integrated)

Front VGA and Rear Web Camera of 5 Mega Pixel or better(OEM certificate shall be furnished )

7. Connectivity Wifi 802.11a/b/g/n/ and 3G/4G for Wifi + 3G/4G Model

8. GPS Yes

9. Bluetooth Yes

10. Keyboard Virtual on Screen

11. OS Latest Version of suitable Tablet OS (Android Ice Cream Sandwich or Higher/IOS 6 or Higher/ Windows 7or Higher)

12. Power 230V, 50 Hz AC Supply

Page 58 of 355


4.4 Item Code Tablet/ 64GB/4


Compliance (Y/N)

1. Processor 1 GHz or higher

2. Memory 1 GB or higher

3. Storage 64 GB or better (internal + external micro SD card)

4. Display 9.4 inches (23.876 cm) to 10.6 inches(26.92 cm)

5. Resolution 1366X768 /1280x800 or higher.

6. Web Camera ( Integrated)

Front VGA and Rear Web Camera of 5 Mega Pixel or better(OEM certificate shall be furnished )

7. Connectivity Wifi 802.11a/b/g/n/ and 3G/4G for Wifi + 3G/4G Model

8. GPS Yes

9. Bluetooth Yes

10. Keyboard Virtual on Screen

11. OS Latest Version of suitable Tablet OS (Android Ice Cream Sandwich or Higher/IOS 6 or Higher/ Windows 7or Higher)

12. Power 230V, 50 Hz AC Supply

Page 59 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________5. iPAD – Technical Specifications

5.1 iPAD-2, 16GB with Wi-Fi

S. No. Features SpecificationsSpecifications

offered by the OEM / Vendor

Compliance (Y/N)

1. Size and Weight

Height: 9.50 inches (241.2 mm), Width: 7.31 inches (185.7 mm), Depth: 0.34 inch (8.8 mm),Weight: 1.33 pounds (601 g)

2. Storage 16 GB

3. Display 9.7-inch (diagonal) LED-backlit glossy widescreen Multi-Touch display with IPS technology,1024-by-768-pixel resolution at 132 pixels per inch (ppi),Fingerprint-resistant oleophobic coating, Support for display of multiple languages and characters simultaneously

4. Chip Dual-core Apple A5 custom-designed, high-performance, low-power system-on-a-chip

5. Wireless and Cellular

Wi-Fi (802.11a/b/g/n),Bluetooth 2.1 + EDR technology

6. Cameras, Photos, and Video Recording

Back camera: Video recording, HD (720p) up to 30 frames per second with audio; still camera with 5x digital zoom, Front camera: Video recording, VGA up to 30 frames per second with audio; VGA-quality still camera, Tap to control exposure for video or stills, Photo and video geotagging over Wi-Fi

7. Battery and Power

Built-in 25-watt-hour re-chargeable lithium-polymer battery, Up to 10 hours of surfing the web on Wi-Fi, watching video, or listening to music, Charging via power adapter or USB to computer system.

8. Input and Output

30-pin dock connector port, 3.5-mm stereo headphone jack, Built-in speaker, Microphone

9. Sensors Accelerometer, Ambient light sensor, Gyroscope

Page 60 of 355




Compliance (Y/N)

10. Location Wi-Fi, Digital compass

11. Audio playback

Frequency response: 20Hz to 20,000Hz, Audio formats supported: HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV, User-configurable maximum volume limit, Dolby Digital 5.1 surround sound pass-through with Apple Digital AV Adapter (sold separately)

12. TV and Video AirPlay Mirroring to Apple TV support at 720p, Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately),Video out support at 576p and 480p with Apple Component AV Cable; 576i and 480i with Apple Composite AV Cable (cables sold separately),Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.

13. Mail Attachment Support

Viewable document types: .jpg, .tiff, .gif (images); .doc and .docx (Microsoft Word); .htm and .html (web pages); .key (Keynote); .numbers (Numbers); .pages (Pages); .pdf (Preview and Adobe Acrobat); .ppt and .pptx (Microsoft PowerPoint); .txt (text); .rtf (rich text

Page 61 of 355




Compliance (Y/N)

format); .vcf (contact information); .xls and .xlsx (Microsoft Excel)

14. Languages As applicable

15. Accessibility VoiceOver screen reader, Support for playback of closed-captioned content, Assistive Touch interface for adaptive accessories, Full-screen zoom magnification, Large fonts, White on black display, Left/right volume adjustment.

16. Environmental Requirements

Operating temperature: 32° to 95° F (0° to 35° C), Nonoperating temperature: -4° to 113° F (-20° to 45° C), Relative humidity: 5% to 95% noncondensing, Maximum operating altitude: 10,000 feet (3000 m).

17. System Requirements

Apple ID (required for some features), Internet access5, Syncing with iTunes on a Mac or PC requires: ,Mac: OS X v10.5.8 or later, PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later.

Page 62 of 355


5.2 iPAD-2, 16GB with Wi-Fi + 3G


Compliance (Y/N)

1. Size and Weight

Height: 9.50 inches (241.2 mm),Width: 7.31 inches (185.7 mm),Depth: 0.34 inch (8.8 mm),Weight: 1.35 pounds (613 g) (Wi-Fi + 3G model), Weight: 1.34 pounds (607 g) (Wi-Fi + 3G for Verizon model)

2. Storage 16 GB

3. Display 9.7-inch (diagonal) LED-backlit glossy widescreen Multi-Touch display with IPS technology,1024-by-768-pixel resolution at 132 pixels per inch (ppi),Fingerprint-resistant oleophobic coating, Support for display of multiple languages and characters simultaneously

4. Chip Dual-core Apple A5 custom-designed, high-performance, low-power system-on-a-chip


Wi-Fi (802.11a/b/g/n),Bluetooth 2.1 + EDR technology, Wi-Fi + 3G model: UMTS/HSDPA/HSUPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz),Wi-Fi + 3G for Verizon model: CDMA EV-DO Rev. A (800, 1900 MHz),Data only3


Back camera: Video recording, HD (720p) up to 30 frames per second with audio; still camera with 5x digital zoom, Front camera: Video recording, VGA up to 30 frames per second with audio; VGA-quality still camera, Tap to control exposure for video or stills, Photo and video geotagging over Wi-Fi


Built-in 25-watt-hour rechargeable lithium-polymer battery, Up to 10 hours of surfing the web on Wi-Fi, watching video, or listening to music, Up to 9 hours of surfing the web using cellular data network, Charging via power adapter or USB to computer system

Page 63 of 355



Compliance (Y/N)

8. Input and Output

30-pin dock connector port, 3.5-mm stereo headphone minijack, Built-in speaker, Microphone, Micro-SIM card tray (Wi-Fi + 3G model)


10. Location Wi-Fi, Digital compass, Assisted GPS, Cellular

11. Audio playback

Frequency response: 20Hz to 20,000Hz, Audio formats supported: HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV, User-configurable maximum volume limit, Dolby Digital 5.1 surround sound pass-through with Apple Digital AV Adapter (sold separately)

12. TV and Video AirPlay Mirroring to Apple TV support at 720p, Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately),Video out support at 576p and 480p with Apple Component AV Cable; 576i and 480i with Apple Composite AV Cable (cables sold separately),Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.

13. Mail Attachment

Viewable document types: .jpg, .tiff, .gif (images); .doc and .docx (Microsoft Word); .htm

Page 64 of 355



Compliance (Y/N)

Support and .html (web pages); .key (Keynote); .numbers (Numbers); .pages (Pages); .pdf (Preview and Adobe Acrobat); .ppt and .pptx (Microsoft PowerPoint); .txt (text); .rtf (rich text format); .vcf (contact information); .xls and .xlsx (Microsoft Excel)

14. Languages Language as applicable

15. Accessibility VoiceOver screen reader, Support for playback of closed-captioned content, Assistive Touch interface for adaptive accessories, Full-screen zoom magnification, Large fonts, White on black display, Left/right volume adjustment.




Apple ID (required for some features),Internet access5, Syncing with iTunes on a Mac or PC requires: ,Mac: OS X v10.5.8 or later, PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later.

Page 65 of 355


5.3 iPAD-3, 16GB with Wi-Fi


Compliance (Y/N)

1. Size and Weight

Height: 9.50 inches (241.2 mm),Width: 7.31 inches (185.7 mm),Depth: 0.37 inch (9.4 mm),Weight: 1.44 pounds (652 g)

2. Storage 16

3. Display Retina display,9.7-inch (diagonal) LED-backlit glossy widescreen Multi-Touch display with IPS technology,2048-by-1536-pixel resolution at 264 pixels per inch (ppi),Fingerprint-resistant oleophobic coating, Support for display of multiple languages and characters simultaneously.

4. Chip Dual-core Apple A5X custom-designed, high-performance, low-power system-on-a-chip with quad-core graphics


Wi-Fi (802.11a/b/g/n),Bluetooth 4.0 technology


5-megapixel iSight camera, Autofocus, Tap to focus, Face detection in still images, Video recording, HD (1080p) up to 30 frames per second with audio, Video stabilization, FaceTime camera with VGA-quality photos and video at up to 30 frames per second, Photo and video geotagging.


Built-in 42.5-watt-hour rechargeable lithium-polymer battery, Up to 10 hours of surfing the web on Wi-Fi, watching video, or listening to music, Charging via power adapter or USB to computer system.

8. Input and Output

30-pin dock connector port, 3.5-mm stereo headphone minijack, Built-in speaker, Microphone


Page 66 of 355



Compliance (Y/N)


11. Audio playback

Frequency response: 20Hz to 20,000Hz, Audio formats supported: HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV,User-configurable maximum volume limit,Dolby Digital 5.1 surround sound pass-through with Apple Digital AV Adapter (sold separately).

12. TV and Video AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p,AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p,Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately),Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately), Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.


Viewable document types: .jpg, .tiff, .gif (images); .doc and .docx (Microsoft Word); .htm and .html (web pages); .key (Keynote); .numbers (Numbers); .pages (Pages); .pdf

Page 67 of 355



Compliance (Y/N)

(Preview and Adobe Acrobat); .ppt and .pptx (Microsoft PowerPoint); .txt (text); .rtf (rich text format); .vcf (contact information); .xls and .xlsx (Microsoft Excel)


15. Accessibility VoiceOver screen reader, Support for playback of closed-captioned content, AssistiveTouch interface for adaptive accessories, Full-screen zoom magnification, Large fonts, White on black display, Left/right volume adjustment/.


Operating temperature: 32° to 95° F (0° to 35° C), Nonoperating temperature: -4° to 113° F (-20° to 45° C),Relative humidity: 5% to 95% noncondensing, Maximum operating altitude: 10,000 feet (3000 m).


Apple ID (required for some features), Internet access6,Syncing with iTunes on a Mac or PC requires: , Mac: OS X v10.5.8 or later, PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later

Page 68 of 355


5.4 iPAD-3 32 GB with Wi-Fi


Compliance (Y/N)

1. Size and Weight


2. Storage 32






5-megapixel iSight camera,Autofocus,Tap to focus, Face detection in still images, Video recording, HD (1080p) up to 30 frames per second with audio, Video stabilization, FaceTime camera with VGA-quality photos and video at up to 30 frames per second, Photo and video geotagging.



8. Input and Output



Page 69 of 355



Compliance (Y/N)


11. Audio playback

Frequency response: 20Hz to 20,000Hz, Audio formats supported: HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV, User-configurable maximum volume limit, Dolby Digital 5.1 surround sound pass-through with Apple Digital AV Adapter (sold separately).




Page 70 of 355



Compliance (Y/N)








Page 71 of 355


5.5 iPAD-3 64 GB with Wi-Fi


Compliance (Y/N)

1. Size and Weight


2. Storage 64









8. Input and Output



Page 72 of 355



Compliance (Y/N)


11. Audio playback





Page 73 of 355



Compliance (Y/N)








Page 74 of 355



Compliance (Y/N)

Page 75 of 355


5.6 iPAD-3 16 GB with Wi-Fi + Cellular



Compliance (Y/N)

1. Size and Weight

Height: 9.50 inches (241.2 mm),Width: 7.31 inches (185.7 mm),Depth: 0.37 inch (9.4 mm),Weight: 1.46 pounds (662 g).

2. Storage 16




Wi-Fi (802.11a/b/g/n),Bluetooth 4.0 technology, Model for AT&T: 4G LTE (700, 2100 MHz)3; UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz),Model for Verizon: 4G LTE (700 MHz)3; CDMA EV-DO Rev. A (800, 1900 MHz); UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz),Data only4.




Built-in 42.5-watt-hour rechargeable lithium-polymer battery, Up to 10 hours of surfing the web on Wi-Fi, watching video, or listening to

Page 76 of 355




Compliance (Y/N)

music, Up to 9 hours of surfing the web using cellular data network, Charging via power adapter or USB to computer system.

8. Input and Output

30-pin dock connector port, 3.5-mm stereo headphone minijack, 3.5-mm stereo headphone minijack, Built-in speaker, Microphone.


10. Location Wi-Fi, Assisted GPS and GLONASS, Cellular

11. Audio playback


12. TV and Video AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p,AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p,Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately),Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately), Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio

Page 77 of 355




Compliance (Y/N)

up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.


Viewable document types: .jpg, .tiff, .gif (images); .doc and .docx (Microsoft Word); .htm and .html (web pages); .key (Keynote); .numbers (Numbers); .pages (Pages); .pdf (Preview and Adobe Acrobat); .ppt and .pptx (Microsoft PowerPoint); .txt (text); .rtf (rich text format); .vcf (contact information); .xls and .xlsx (Microsoft Excel)






Apple ID (required for some features), Internet access6, Syncing with iTunes on a Mac or PC requires: , Mac: OS X v10.5.8 or later, PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3.

Page 78 of 355


5.7 iPAD-3, 32 GB with Wi-Fi + Cellular


Compliance (Y/N)

1. Size and Weight


2. Storage 32






5-megapixel iSight camera, Autofocus,Tap to focus, Face detection in still images, Video recording, HD (1080p) up to 30 frames per second with audio, Video stabilization, FaceTime camera with VGA-quality photos and video at up to 30 frames per

Page 79 of 355



Compliance (Y/N)

second, Photo and video geotagging.


Built-in 42.5-watt-hour rechargeable lithium-polymer battery, Up to 10 hours of surfing the web on Wi-Fi, watching video, or listening to music, Up to 9 hours of surfing the web using cellular data network, Charging via power adapter or USB to computer system.

8. Input and Output




11. Audio playback


12. TV and Video AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p,AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p,Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately),Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately), Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio

Page 80 of 355



Compliance (Y/N)

up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.









Page 81 of 355



Compliance (Y/N)

Page 82 of 355


5.8 iPAD-3, 64 GB with Wi-Fi + Cellular



Compliance (Y/N)

1. Size and Weight


2. Storage 64








Built-in 42.5-watt-hour rechargeable lithium-polymer battery, Up to 10 hours of surfing the web on Wi-Fi, watching video,

Page 83 of 355




Compliance (Y/N)

or listening to music, Up to 9 hours of surfing the web using cellular data network, Charging via power adapter or USB to computer system.

8. Input and Output




11. Audio playback


12. TV and Video AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p,AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p,Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately),Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately), Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4

Page 84 of 355




Compliance (Y/N)

video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.




15. Accessibility VoiceOver screen reader, Support for playback of closed-captioned content, Assistive Touch interface for adaptive accessories, Full-screen zoom magnification, Large fonts, White on black display, Left/right volume adjustment/.





Page 85 of 355


6. Scanners – Technical Specifications

6.1 Item Code DSCAN/1


Compliance (Y/N)


2. Model Please Specify

3. Resolution (dpi) 1200x1200

4. Speed (PPM) Minimum 8

5. ADF capacity Min 50 Page

6. Flat Bed Size A4

7. Document Size A4

Page 86 of 355




Compliance (Y/N)




4. Speed (PPM) 8

5. ADF capacity Minimum 30

6. Flat Bed Size A4

7. Document Size Legal through ADF

Page 87 of 355




Compliance (Y/N)



3. Resolution (dpi) 300

4. Speed (PPM) 20

5. ADF capacity 50

6. Flat Bed Size A4

7. Document Size Legal

Page 88 of 355




Compliance (Y/N)




4. Speed (PPM) 20

5. ADF capacity 50

6. Flat Bed Size NA


Page 89 of 355




Compliance (Y/N)




4. Speed (PPM) 30

5. ADF capacity 50

6. Flat Bed Size Legal ``


Page 90 of 355




Compliance (Y/N)




4. Speed (PPM) 30

5. ADF capacity 50

6. Flat Bed Size A4

7. Document Size A4

Page 91 of 355




Compliance (Y/N)




4. Speed (PPM) 30

5. ADF capacity NA

6. Flat Bed Size Legal

7. Document Size Networking

Page 92 of 355




Compliance (Y/N)




4. Speed (PPM) 60

5. ADF capacity 50

6. Flat Bed Size A4


Page 93 of 355




Compliance (Y/N)




4. Speed (PPM) 15

5. ADF capacity 50

6. Flat Bed Size A4

7. Document Size NA

8. Networking Yes

Page 94 of 355




Compliance (Y/N)




4. Speed (PPM) Min 8

5. ADF capacity Min 50

6. Flat Bed Size A4

7. Document Size NA

Page 95 of 355


7. Printer – Technical Specifications

7.1 Laser Printers

7.1.1 Item Code LP/Mono/1


Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A4

5. Printing Speed (in PPM, A4 Size)

14

6. Ports 1 USB 2.0

7. Memory in MB Minimum 64 MB

8. Network Card 10/100

NA

9. Duplexing NA

Page 96 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A4


32

6. Ports 1 USB

7. Memory in MB NA


Yes

9. Duplexing Yes

Page 97 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A4


18

6. Ports 1 USB

7. Memory in MB NA


NA

9. Duplexing NA

Page 98 of 355




Compliance (Y/N)



3. Resolution (dpi) Mono 600x600

4. Paper Size A4


40

6. Ports 1 USB

7. Memory in MB NA


Yes

9. Duplexing Yes

Page 99 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A4


26

6. Ports 1 USB

7. Memory in MB NA


NA

9. Duplexing Yes

Page 100 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A4


26

6. Ports 1 USB

7. Memory in MB NA


Yes

9. Duplexing Yes

Page 101 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A4


20

6. Ports 1 USB

7. Memory in MB NA


NA

9. Duplexing NA

Page 102 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A4


20

6. Ports 1 USB

7. Memory in MB NA


NA

9. Duplexing Yes

Page 103 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A4


20

6. Ports 1 USB

7. Memory in MB NA


Yes

9. Duplexing NA

Page 104 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A4


30

6. Ports 1 USB

7. Memory in MB NA


Yes

9. Duplexing Yes

Page 105 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A3


24

6. Ports 1 USB

7. Memory in MB NA


Yes

9. Duplexing Yes

Page 106 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A3


40

6. Ports NA

7. Memory in MB NA


Yes

9. Duplexing Yes

Page 107 of 355




Compliance (Y/N)



3. Resolution (dpi)

Mono 600x600

4. Paper Size A4


16 BW and 4C

6. Ports 1 USB

7. Memory in MB 8


Yes

9. Duplexing NA

Page 108 of 355


7.1.14 Item Code LP/Color/14


Compliance (Y/N)



3. Resolution (dpi)

Color 600x600

4. Paper Size A4


20 BW and C

6. Ports 1 USB

7. Memory in MB 16


Yes

9. Duplexing Yes

Page 109 of 355




Compliance (Y/N)



3. Resolution (dpi)

Color 600x600

4. Paper Size A4


8 BW and C

6. Ports 1 USB

7. Memory in MB NA


NA

9. Duplexing NA

Page 110 of 355




Compliance (Y/N)



3. Resolution (dpi)

Color 600x600

4. Paper Size A4


8 BW and C

6. Ports 1 USB

7. Memory in MB NA


Yes

9. Duplexing NA

Page 111 of 355




Compliance (Y/N)



3. Resolution (dpi)

Color 600x600

4. Paper Size A4


30 BW and C

6. Ports 1 USB

7. Memory in MB 16


Yes

9. Duplexing Yes

Page 112 of 355




Compliance (Y/N)



3. Resolution (dpi)

Color 600x600

4. Paper Size A3


20 BW and C

6. Ports 1 P

7. Memory in MB 96


Yes

9. Duplexing Yes

Page 113 of 355


7.2 Inkjet Printer

7.2.1 Item Code Inkjet/1


Compliance (Y/N)



3. Resolution (dpi)

1200x600

4. Paper Size A3


12 BW and 8 C

6. Ports 1 USB

7. Memory in MB NA


NA

9. Duplexing NA

Page 114 of 355




Compliance (Y/N)



3. Resolution (dpi)

4800x1200

4. Paper Size A4


22 BW and 15 C

6. Ports 1 USB

7. Memory in MB NA


NA

9. Duplexing NA

Page 115 of 355




Compliance (Y/N)



3. Resolution (dpi)

4800x1200

4. Paper Size A4


28 BW and 24 C

6. Ports 1 USB

7. Memory in MB NA


NA

9. Duplexing Yes

Page 116 of 355




Compliance (Y/N)



3. Resolution (dpi)

4800x1200

4. Paper Size A4


20 BW and 14 C

6. Ports 1 USB

7. Memory in MB NA


NA

9. Duplexing NA

Page 117 of 355




Compliance (Y/N)



3. Resolution (dpi)

4800x1200

4. Paper Size A4


20 BW and 14 C

6. Ports 1 USB

7. Memory in MB NA


Yes

9. Duplexing NA

Page 118 of 355


7.3 Dot Matrix Printer

7.3.1 Item Code DMP/1


Compliance (Y/N)



3. Pin 9

4. Column 80

5. CPS (at 10 cpi)

250

6. Port One parallel

Page 119 of 355




Compliance (Y/N)



3. Pin 9

4. Column 136

5. CPS (at 10 cpi)

300


Page 120 of 355




Compliance (Y/N)



3. Pin 9

4. Column 136

5. CPS (at 10 cpi)

475


Page 121 of 355




Compliance (Y/N)



3. Pin 24

4. Column 80

5. CPS (at 10 cpi)

300


Page 122 of 355




Compliance (Y/N)



3. Pin 24

4. Column 80

5. CPS (at 10 cpi)

300

6. Port One parallel English and Devnagri script inbuilt

Page 123 of 355




Compliance (Y/N)



3. Pin 24

4. Column 136

5. CPS (at 10 cpi)

300

6. Port One parallel English and Devnagri script inbuilt

Page 124 of 355




Compliance (Y/N)



3. Pin 24

4. Column 136

5. CPS (at 10 cpi)

500

6. Port One parallel and one serial / USB

Page 125 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________7.4 Line Matrix Printers

7.4.1 Item Code LMP/1

S. No Features Specifications Specifications offered by the OEM / Vendor

Compliance (Y/N)



3. Speed (in LJPM)

500

4. Column 132/136

5. Port One parallel and one serial

Page 126 of 355




Compliance (Y/N)



3. Speed (in LJPM)

1000

4. Column 132/136


Page 127 of 355




Compliance (Y/N)



3. Speed (in LJPM)

1500

4. Column 132/136


Page 128 of 355




Compliance (Y/N)



3. Speed (in LJPM)

1800

4. Column 132/136


Page 129 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________7.5 Multifunction Mono Printer

7.5.1 Item Code MFP/Mono/1


Compliance (Y/N)



3. Function Print/ Copy/ Scan

4. Resolution (dpi)

600x600

5. Paper Size A4


Mono upto 18 PPM

7. Duty Cycle (PPM)

8000

8. Port USB 2.0

9. Memory in MB 8

10. Scanner Flatbed

Page 130 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________7.5.2 Item Code MFP/Mono/2


Compliance (Y/N)




4. Resolution (dpi)

600x600

5. Paper Size A4


Mono upto 18 PPM

7. Duty Cycle (PPM)

8000

8. Port USB 2.0

9. Memory in MB 64

10. Scanner Ethernet and Flatbed

Page 131 of 355




Compliance (Y/N)




4. Resolution (dpi)

1200x1200

5. Paper Size A4


Mono upto 18 PPM

7. Duty Cycle (PPM)

8000

8. Port NA

9. Memory in MB 32

10. Scanner NA

Page 132 of 355




Compliance (Y/N)




4. Resolution (dpi)

1200x1200

5. Paper Size A4


Mono upto 26 PPM

7. Duty Cycle (PPM)

8000

8. Port USB 2.0, Ethernet

9. Memory in MB 128

10. Scanner NA

Page 133 of 355




Compliance (Y/N)




4. Resolution (dpi)

600x600

5. Paper Size A4


Mono upto 27 PPM

7. Duty Cycle (PPM)

75000

8. Port USB 2.0, Network Interface

9. Memory in MB 256

10. Scanner NA

Page 134 of 355




Compliance (Y/N)




4. Resolution (dpi)

600x600

5. Paper Size A4


Mono upto 35 PPM

7. Duty Cycle (PPM)

75000

8. Port USB 2.0 and Network Interface with Automatic Duplexer

9. Memory in MB 256

10. Scanner NA

Page 135 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________7.6 Multifunction Color Laser Printer

7.6.1 Item Code MFP/Color/1


Compliance (Y/N)



3. Function Print/ Copy/ Scan/Fax

4. Paper Size A4


12 PPM in Mono, 8 PPM in color

6. Memory in MB 160 MB with memory stick slot

Page 136 of 355




Compliance (Y/N)




4. Paper Size A4


20 PPM in Mono & color

6. Memory in MB 160 MB RAM

Page 137 of 355




Compliance (Y/N)



3. Function Print/ Copy/ Scan/Fax

4. Paper Size A4



6. Memory in MB 160 MB RAM

Page 138 of 355




Compliance (Y/N)



3. Function Print/ Copy/ Scan/Fax with Auto Duplexer

4. Paper Size A4



6. Memory in MB 160 MB RAM with auto Duplexer

Page 139 of 355




Compliance (Y/N)




4. Resolution (in dpi)

600x600

5. Duty cycle 1,75,000

6. Paper Size A4


30 PPM

8. Memory in MB NA

Page 140 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________7.7 Fargo Printers

7.7.1 Item Code FP/Mod/1


Compliance (Y/N)



3. Printer Single Side Printer module

Erase and rewrite eco-friendly features

4. Print Method Direct to Card- Dye sublimation / Resin Thermal Transfer

5. Colors Upto 16.7 million / 256 shades per pixel

6. Resolution (dpi)

300 dpi (11.8 dots/mm)

7. Print speed At least 150 Cards per hour (YMCKO with transfer)

At least 100 Cards per hour (YMCKOK with transfer)

8. Printing Area Edge-to-edge on CR-80 Cards

9. Memory 32 MB RAM

10. Accepted ID card size

85.6mm L X 54mm W

11. Card Thickness

.009” - .040” / 9 mil – 40 mil / .229mm – 1.016mm

12. Input Hopper Card Capacity

Minimum 100 Cards (.030” / .762mm)

13. Output Hopper card capacity

Single Side Printer module

14. Print Head Life One year

15. Connectivity USB 2.0 Optional Ethernet with internal print server

16. Consumable Ribbon Cartridge / Half Panel Ribbon

Page 141 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________7.7.2 Item Code FP/Mod/2


Compliance (Y/N)



3. Printer Single Side Printer module

4. Print Method Modular Dye sublimation / Re-transfer & field upgradable to Dual Side Printer, Dual Side Lamination & Smart Card Encoding (Contact / Contact less)


6. Resolution (dpi)


7. Print speed At least 90 Cards per hour (YMC with transfer)

At least 75 Cards per hour (YMCK with transfer)

8. Printing Area Over-the-edge on CR-80 Cards

9. Memory NA


85.6mm L X 54mm W

11. Card Thickness

Print only: .030” (30mil) to .050” (50mil) / .762mm to1.27mm)

Print / Lamination : .030” (30mil) to .050” (50mil) / .762mm to 1.27mm





14. Print Head Life Lifetime

15. Connectivity USB and Ethernet (on board)

16. Software Drivers

Windows 2000 / XP / Server 2003/ Vista

Page 142 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________7.7.3 Item Code FP/Mod/3


Compliance (Y/N)



3. Printer Dual Side Printer module

Erase and rewrite eco-friendly features

4. Print Method Direct to Card- Dye sublimation / Resin Thermal Transfer


6. Resolution (dpi)


7. Print speed At least 150 Cards per hour (YMCKO with transfer)

At least 100 Cards per hour (YMCKOK with transfer)

8. Printing Area Edge-to-edge on CR-80 Cards

9. Memory 32 MB RAM


85.6mm L X 54mm W

11. Card Thickness

.009” - .040” / 9 mil – 40 mil /

.229mm – 1.016mm




Upto 30 Cards (.030” / .762mm)

14. Print Head Life One year

15. Connectivity USB 2.0 Optional Ethernet with internal print server

16. Consumable Ribbon Cartridge / Half Panel Ribbon

Page 143 of 355


7.8 Network Printer cum Fax


Compliance (Y/N)

1. Make Must be specified

2. Model All the relevant product brochures and manuals must be submitted.

3. Speed (min.) min 25 PPM

4. Memory(min.) min 64 MB

5. Resolution 1200 x 1200 dpi

6. Interface USB, Ethernet (UTP) with respective cables

7. Monthly Duty Cycle

Min 18000 pages

8. Duplex Automatic Duplex

9. Drivers Windows XP, Windows Vista, Windows 7, MAC OS 9.0, MAC OS X, Linux Kernel 2.4 or later

Page 144 of 355


7.9 Industrial Laser Printer


Compliance (Y/N)



3. Speed (min.) min 20 PPM (A4)

4. Memory (min.)

min 8 MB

5. Resolution 600*600 dpi



Min 10000 pages



Page 145 of 355


7.10 Other Printers


Compliance (Y/N)



3. Speed (min.) ISO / IEC 24734

min 12 PPM – Black (A4)

4. Memory (min.) min 8 MB

5. Resolution 600*600 dpi



Min 10000 pages



Page 146 of 355


8. UPS – Technical Specifications

8.1 Online UPS with isolation transformer

8.1.1Item Code Online/UPS 10KVA/1



Compliance (Y/N)

1. Make Please Specify2. Model Please Specify3. Power Rating 10 KVA4. Technology True Online Double Conversion

Architecture5. AC Input Three Phase

6. AC Output Three Phase7. Operating

Frequency50Hz

8. Output voltageRegulation

+/-1.5%

9. Power Factor Unity10. Efficiency Min. 90% (Online mode)11. LED LCD Display having complete

information about the Input and Output data

12. StandardCommunicationports

RS232

13. Form Factor Floor Mounted type14. Battery Type Sealed Maintenance Free with

Rack & Connectors.15. Battery

Runtime30 minutes ( Min 8000VAH )

16. Start-On-Battery

Should allow startup of UPS without utility input

17. Operating Temp.

0°C - +40°C

18. Audible Noise <50 dB battery mode19. Markings CE20. Mandatory

CertificationISO 9001 Series Manufacturer, Valid Test Certificate from any Govt. Approved Test/ Certifying Agency on Tendered Specs

21. Cables All the required cables/ accessories to be included

Page 147 of 355


8.1.2 Item Code Online/UPS 10KVA/2



Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232



Runtime60 minutes ( Min 13500 VAH )



17. Operating Temp.

0°C - +40°C




Page 148 of 355





Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232






17. Operating Temp.

0°C - +40°C




Page 149 of 355





Compliance (Y/N)



6. AC Output Single Phase7. Operating

Frequency50Hz


+/-1.5%

9. Power Factor Near to unity10. Efficiency Min. 90% (Online mode)11. LED LCD Display having complete



RS232






17. Operating Temp.

0°C - +40°C




Page 150 of 355





Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232

13. Form Factor Floor Mounted type14. Battery Type Sealed Maintenance Free15. Battery




17. Operating Temp.

0°C - +40°C




Page 151 of 355





Compliance (Y/N)




Frequency50Hz


+/-1.5%

9. Power Factor Near to Unity10. Efficiency Min. 90% (Online mode)11. LED LCD Display having complete



RS232






17. Operating Temp.

0°C - +40°C

18. Audible Noise <50 dB battery mode19. Markings CE (Self Certification)20. Mandatory



Page 152 of 355





Compliance (Y/N)


Architecture5. AC Input Single Phase


Frequency50Hz


+/-1.5%

9. Efficiency Min. 90% (Online mode)10. LED LCD Display having complete



RS232


Rack & Connectors.14. Indicative

Backup time30 minutes ( Min 8000VAH )



16. Operating Temp.

0°C - +40°C

17. Audible Noise <50 dB battery mode18. Markings CE Self Certification19. Mandatory



Page 153 of 355



S. No. Features Specifications

Specifications offered by the OEM /

VendorCompliance

(Y/N)




Frequency50Hz


+/-1.5%




RS232


Rack & Connectors.15. Indicative

Backup time60 minutes ( Min 18720 VAH )

16. Start-On-Battery Should allow startup of UPS without utility input

17. Operating Temp.

0°C - +40°C




Page 154 of 355





Compliance (Y/N)




Frequency50Hz


+/-1.5%

9. Power Factor Near to Unity10. Efficiency Min. 90% (Online mode)11. LED LCD Display having complete



RS232


accessories and connectors15. Indicative

Backup time120 minutes ( Min 28800 VAH )



17. Operating Temp.

0°C - +40°C

18. Audible Noise <50 dB battery mode19. Markings CE Self Certifications20. Mandatory



Page 155 of 355





Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


accessories and connectors15. Battery




17. Operating Temp.

0°C - +40°C




Page 156 of 355





Compliance (Y/N)




Frequency50Hz


+/-1.5%

9. Power Factor Unity10. Wave Form Pure sine wave11. Harmonic

Distortion=<2% THD (Linear Load), =<6% THD (Non-Linear Load

12. Bypass Automatic13. Efficiency Min. 90% (Online mode)14. LED LCD Display having complete



RS232






20. Operating Temp.

0°C - +40°C




Page 157 of 355





Compliance (Y/N)




Frequency50Hz


+/-1.5%





15. StandardCommunicationPorts

RS232






20. Operating Temp.

0°C - +40°C




Page 158 of 355





Compliance (Y/N)




Frequency50Hz


+/-1.5%

9. Power Factor Near to unity10. Wave Form Pure sine wave11. Harmonic





RS232



Runtime30 minutes



20. Operating Temp.

0°C - +40°C




Page 159 of 355





Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime60 minutes



20. Operating Temp.

0°C - +40°C

21. Audible Noise <50 dB battery mode22. RoHS

ComplianceShould be EU RoHS/ WEEE Compliant

23. Markings CE Self Certification24. Mandatory



Page 160 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime120 minutes



20. Operating Temp.

0°C - +40°C




Page 161 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime30 minutes



20. Operating Temp.

0°C - +40°C




Page 162 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime60 minutes



20. Operating Temp.

0°C - +40°C




Page 163 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime120 minutes



20. Operating Temp.

0°C - +40°C




Page 164 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime30 minutes



20. Operating Temp.

0°C - +40°C




Page 165 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime60 minutes



20. Operating Temp.

0°C - +40°C




Page 166 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime120 minutes



20. Operating Temp.

0°C - +40°C




Page 167 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime120 minutes



20. Operating Temp.

0°C - +40°C




Page 168 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%



12. Bypass Automatic + Manual13. Efficiency Min. 90% (Online mode)14. LED LCD Display having complete



RS232



Runtime60 minutes



20. Operating Temp.

0°C - +40°C




Page 169 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime120 minutes



20. Operating Temp.

0°C - +40°C




Page 170 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%

9. Power Factor Near to Unity10. Wave Form Pure sine wave11. Harmonic





RS232



Runtime30 minutes



20. Operating Temp.

0°C - +40°C




Page 171 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime60 minutes



20. Operating Temp.

0°C - +40°C




Page 172 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%






RS232



Runtime120 minutes



20. Operating Temp.

0°C - +40°C




Page 173 of 355


8.1.28 Item Code Online/UPS 1.0KVA/28


Compliance (Y/N)

1. Make Please Specify2. Model Please Specify

3. Power Rating 1.0 KVA4. Technology True Online Double Conversion



Frequency50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 174 of 355





Compliance (Y/N)


3. Power Rating 1.0 KVA

4. Technology True Online Double ConversionArchitecture

5. AC Input Single Phase


Frequency50Hz


+/-1.5%




RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C




Page 175 of 355





Compliance (Y/N)






Frequency50Hz


+/-1.5%




RS232


Runtime120 minutes



16. Operating Temp.

0°C - +40°C




Page 176 of 355




Compliance (Y/N)






Frequency50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 177 of 355




Compliance (Y/N)

1. Make Please Specify2. Model Please Specify3. Power Rating 2.0 KVA4. Technology True Online Double Conversion



Frequency50Hz


+/-1.5%

9. Efficiency Min. 90 (Online mode)10. LED LCD Display having complete



RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C




Page 178 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime120 minutes



16. Operating Temp.

0°C - +40°C




Page 179 of 355


Page 180 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 181 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C




Page 182 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime120 minutes



16. Operating Temp.

0°C - +40°C




Page 183 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 184 of 355




Compliance (Y/N)






Frequency50Hz


+/-1.5%




RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C




Page 185 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime120 minutes



16. Operating Temp.

0°C - +40°C




Page 186 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 187 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C




Page 188 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime120 minutes



16. Operating Temp.

0°C - +40°C




Page 189 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 190 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C




Page 191 of 355




Compliance (Y/N)




Frequency50Hz


+/-1.5%




RS232


Runtime120 minutes



16. Operating Temp.

0°C - +40°C




Page 192 of 355


8.2 Online UPS (Solid State)



Compliance (Y/N)



6. AC Output Single Phase without Isolation transformer

7. OperatingFrequency

50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 193 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C




Page 194 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime120 minutes



16. Operating Temp.

0°C - +40°C




Page 195 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 196 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C




Page 197 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime120 minutes



16. Operating Temp.

0°C - +40°C




Page 198 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 199 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C




Page 200 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 201 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C




Page 202 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime120 minutes



16. Operating Temp.

0°C - +40°C




Page 203 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime30 minutes



16. Operating Temp.

0°C - +40°C




Page 204 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime60 minutes



16. Operating Temp.

0°C - +40°C



Page 205 of 355




Compliance (Y/N)





50Hz


+/-1.5%




RS232


Runtime120 minutes



16. Operating Temp.

0°C - +40°C



Page 206 of 355


8.3 Line - Interactive UPS – Technical Specifications

8.3.1 Item Code Line-Int/UPS 0.5KVA/Single Phase/1


Compliance (Y/N)

1. Make Please Specify2. Model Please Specify3. Power Rating 0.5 KVA4. AC Input 160V to 280V

5. AC Output 230V6. Operating

Frequency50Hz


+/-1.5%

8. LED LCD Display having complete information about the Input and Output data


RS232


Runtime30 minutes

13. Full Load 0.6 PF14. Operating

Temp.0°C - +40°C




Page 207 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime60 minutes


Temp.0°C - +40°C




Page 208 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime120 minutes


Temp.0°C - +40°C




Page 209 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime30 minutes


Temp.0°C - +40°C




Page 210 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime60 minutes


Temp.0°C - +40°C




Page 211 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime120 minutes


Temp.0°C - +40°C




Page 212 of 355


8.4.7 Item Code Line-Int/UPS 0.8 KVA/Single Phase/7


Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime30 minutes


Temp.0°C - +40°C




Page 213 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime60 minutes


Temp.0°C - +40°C




Page 214 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime120 minutes


Temp.0°C - +40°C




Page 215 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime30 minutes


Temp.0°C - +40°C




Page 216 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime60 minutes


Temp.0°C - +40°C




Page 217 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime120 minutes


Temp.0°C - +40°C




Page 218 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime30 minutes


Temp.0°C - +40°C




Page 219 of 355




Compliance (Y/N)



Frequency50Hz


+/-1.5%



RS232


Runtime60 minutes


Temp.0°C - +40°C




Page 220 of 355




Compliance (Y/N)



4. AC Input 160V to 280V


Frequency50Hz


+/-1.5%



RS232


Runtime120 minutes


Temp.0°C - +40°C




Page 221 of 355


8.5 Other One (1) KVA


Compliance (Y/N)



3. Power Rating 1 KVA

4. Technology True Online Double Conversion Architecture

5. Nominal input voltage (VAC)

220/230/240 VAC

6. In put voltage Range

160-300 VAC

7. Operating Frequency

50Hz

8. Nominal output Voltage

230 VAC

9. Output voltage Regulation

+/-1.5%

10. Overload Capacity

Up to 110 % for 30 sec, 111-150% for 200ms or better

11. Efficiency Min. 90 (Online mode)

12. Load Crest 3 : 1


14. Standard Communication ports

RS232

15. Form Factor Floor Mounted type

16. Battery Type Sealed Maintenance Free

17. Battery Runtime

For 30 Min.

18. Start-On Battery


19. Operating Temp.

0°C - +40°C

Page 222 of 355



Compliance (Y/N)

20. Audible Noise <50 dB battery mode

21. Markings CE Self Certification

22. Mandatory Certification

ISO 9001 Series Manufacturer, Valid Test Certificate from any Govt. Approved Test/ Certifying Agency on Tendered Specs

23. No. of Sockets: Min. 3 Sockets for connecting devices


Page 223 of 355


8.6 Other UPS (5KVA to 10 KVA)


Compliance (Y/N)



3. Power Rating 5 to 10 KVA

4. Technology True Online Double Conversion Architecture

5. Nominal input voltage (VAC)

220/230/240 VAC

6. Input voltage Range

160-300 VAC

7. Operating Frequency

50Hz

8. Nominal output Voltage

230 VAC

9. Output voltage Regulation

+/-1.5%

10. Overload Capacity

Up to 110 % for 30 sec, 111-150% for 200ms or better

11. Efficiency Min. 90 (Online mode)

12. Load Crest 3 : 1


14. Standard Communication ports

RS232

15. Form Factor Floor Mounted type

16. Battery Type Sealed Maintenance Free

17. Battery Runtime

For 30 Min.



19. Operating 0°C - +40°C

Page 224 of 355



Compliance (Y/N)

Temp.

20. Audible Noise <50 dB battery mode

21. Markings CE Self Certification

22. Mandatory Certification

ISO 9001 Series Manufacturer, Valid Test Certificate from any Govt. Approved Test/ Certifying Agency on Tendered Specs

23. Cables/ Accessories

All the required cables, accessories, management software to be included

Page 225 of 355


9. Barcode Scanner – Technical Specification

9.1 Hand Held type Laser Scan System


Compliance (Y/N)


3. Scan Rate 100 Scan Lines per second or more

4. System Laser5. Print Contrast

Ratio25% or Better

6. Resolution 5 mil or better7. Bar Code

Density/ Depth of field

13 mil: 1 to 15 inch (typical).

8. Compatibility with Symbology

UPC-A / UPC-E, EAN 13, JAN-13, CODABAR, ADD-ON-2, Add-ON-5, CODE-93 and Industrial Codes, Interleaved 2 or 5, EAN 128.

9. Interface USB or Key Board Wedge

Page 226 of 355


9.2 Hand Held type Image Scan System


Compliance (Y/N)


3. Scan Rate 200 per second or more4. System Imager5. Print Contrast

Ratio25% or Better

6. Resolution 5 mil or better7. Bar Code

Density/ Depth of field

13 mil/ 1 to 20 cm (typical).

8. Compatibility with Symbology

UPC-A / UPC-E, EAN 13, JAN-13, CODABAR, ADD-ON-2, Add-ON-5, CODE-93 and Industrial Codes, Interleaved 2 or 5, EAN 128.

9. Interface USB

Page 227 of 355


9.3 Other Barcode Scanner


Compliance (Y/N)

1. Light Source Red LED 660nm2. Resolution 1D : 0.127 mm (5 mils)

2D : 0.21 mm ( 8 mils)3. PCS Up to 0.454. Depth of Scan

Field250 mm

5. Front Focus 50 mm6. Photo Sensor 2048 pixel CCD Image

sensor7. Scanning rate 100 scans/sec x 2 cycles8. Decoding rate Real time 270 scans/second9. Scanning

performance400-500 scans per second

10. Print Contrast 30% or more11. Focal Point 114 mm ( 4.5 inches ) from

lens plate12. Skew Angle ±65°13. Pitch Angle ±65°14. Rotational

Capability360°

15. Receiving Device

3648 element linear imager

16. Reading Distance

From .5 in. (1.3 cm) to 18 in. (46 cm) on medium density bar codes

17. Reading Width 7.5 mil code: 7 in. (18 cm) from nose, 3.5 in. (8.9 cm) wide13 mil code: 12.5 in. (31.8 cm) from nose, 8.0 in. (20.3 cm) wide

18. Temperature Operating: 0°C to +50°CStorage: -40°C to +60°C

19. Power +5vdc ± 0.5%20. Consumption 100mA operating, 10mA

standby

Page 228 of 355


10. Barcode Printer


Compliance (Y/N)

1. Make Please Specify2. Model Please Specify3. Type Desktop4. Printing Type Thermal Transfer5. Printing Speed Up to 4 ips or better

6. Print Width 4.09 inches or better7. Resolution 203 dpi or better8. Symbologies Linear, PDF-417, Maxi Codes9. Interface Parallel and Serial, with cables

10. Memory 512 KB Flash, 1 MB SDRAM or more

Page 229 of 355


11. Racks – Sample Technical Specifications

11.1 9 U Rack


Compliance (Y/N)

1. Make Please Specify2. Model All the relevant product brochures

and manuals must be submitted.3. Dimensions 600(w)x 530(d)x 9U(h)4. Weight

Capacity132 lbs (60 kg)

5. Side doors Complete knockdown format for easy installation & later maintenance; with lock & key

6. Ventilation Standard with one side exhaust fan

Page 230 of 355


11.2 Different Type of 42 U Rack


Compliance (Y/N)



3. Dimensions (600(w)x 800(d)x 42U(h)) / (800(w)x 1000(d)x 42U(h)) / (1000(w)x 1000(d)x 42U(h))

4. Weight Capacity

Up to 1 Tonne

5. Side doors Complete knockdown format for easy installation & later maintenance; with lock & key

6. Ventilation Standard with one side exhaust fan

7. Features 19" mounting profiles Front, Rear and Middle

Removable/Lockable side panels with venting

Large floor aperture Quick release door pins, for

easy access to equipment 'U' height position markers

for accurate equipment positioning

Vertical Cable Manager (1), fan tray with 04 fans or higher (1), 720mm depth heavy duty shelf (1), Keyboard Tray (1), 10 socket vertical PDU (1)

Page 231 of 355


12. Surveillance System – Technical Specifications

12.1 Analog Box Camera


Compliance (Y/N)

1. Signal System PAL2. Effective Pixel 752(h) x 582(v) or better3. Image device 1/3” CCD or better4. Horizontal

Resolution540 TV Lines

5. Lens Type C/CS for box cameras and 2.8 to 10 mm in case of varifocal

6. Signal to Noise Ratio

50 db or Higher

7. Video Output Signal

1Vp-p composite (75 ohms)

8. Scanning Frequency

15.625 KHz (h)and 50 Hz (v)

9. Minimum Illumination

0.01 lux in case of 540 TVL camera

10. Signal Processing

Digital Signal Process

11. Electronic Shutter

1/50-1/10000 or better

12. White Balance Indoor/Outdoor/Manual13. Privacy Zones 4 Privacy zones as minimum14. Iris Control Yes15. Power Source Adaptor shall be provided by the

vendor to allow equipment to work on 220 V to 240 V, 50Hz

16. Mounting Bracket

Standard wall mount for indoor & pole mount for outdoor

Page 232 of 355


12.2 Analog PTZ Camera


Compliance (Y/N)

1. Signal System PAL2. Effective Pixel 752(h) x 582(v) or better3. Image device 1/3” pr 1/4" CCD or better4. Horizontal

Resolution540 TV Lines

5. Lens Type 25x optical & 12x digital or 35x optical & 12x digital or better


50 db or Higher

7. Video Output Signal

1Vp-p composite (75 ohms)

8. Scanning Frequency

15.625 KHz (h)and 50 Hz (v)






1/50-1/10000 or better

12. White Balance Yes13. Privacy Zones 8 Privacy zones14. Iris Control Yes15. Alarm Input/

OutputMinimum One

16. Focus Mode Auto/ Zooming/ One Push/ Manual17. Panning

Range and Speed

0 deg to 360 deg, max 240 deg per second

18. Tilting Range 0 to 90 deg19. Presets 99 presets or higher20. On Screen

DisplayYes, English

21. Power Source Adaptor shall be provided by the vendor to allow equipment to work on 220 V to 240 V, 50Hz



Page 233 of 355


12.3 IP Dome Camera


Compliance (Y/N)

1. Signal System PAL2. Effective Pixel 752(h) x 582(v) or better3. Image device 1/3” CCD / CMOS or better4. Resolution Min 720x5765. Frame Rate 25 FPS

6. Compression H.264/ MJPEG/MPEG$7. Audio Full Duplex, Audio IN/OUT8. ID / Password Multi level user ID/Password9. Encryption HTTP (SSL/TSL)

10. Phusical Layer 10/100 base Tx Ethernet11. Protocol TCP/IP, HTTP, RTP, RTSP12. IP Support Static / Dynamic or both13. Remote

ManagementYes


0.6 lux




1/50-1/10000 or better

17. PC Client PC application client with a channel recording feature support

18. Web Client Viewer trough HTTP (min). System Configuration Setting/ Streaming

19. Simultaneous Connection

5 Users or more

20. White Balance Yes21. Day & Night Yes22. Power Source Adaptor shall be provided by the

vendor to allow equipment to work on 220 V to 240 V, 50Hz



Page 234 of 355


12.4 IP PTZ Camera


Compliance (Y/N)

1. Signal System PAL2. Effective Pixel 752(h) x 582(v) or better3. Image device 1/4” CCD / CMOS or better4. Horizontal

ResolutionMin 704x576

5. Lens Type 25x optical & 12x digital or 35x optical & 12x digital or better


50 db or Higher

7. Exposure Auto8. Auto Gain

ControlYes






1/50-1/10000 or better

12. White Balance Yes13. Privacy Zones 8 Privacy zones14. Iris Control Yes15. Alarm Input/

OutputMinimum One

16. Focus Mode Auto/ Zooming/ One Push/ Manual17. Panning

Range and Speed

0 deg to 360 deg, max 240 deg per second

18. Tilting Range 0 to 90 deg19. Presets 99 presets or higher20. On Screen

DisplayYes, English

21. Power Source Adaptor shall be provided by the vendor to allow equipment to work on 220 V to 240 V, 50Hz



Page 235 of 355


12.5 DVR 4 channel


Compliance (Y/N)

1. Make Please specify2. Model Please specify3. Channel 44. Connectivity TCP/IP5. Accessory remote viewing software

6. Storage 2000 GB, The recorder shall provide the ability to manually ‘back up’ recorded data to hard disk or DVD / RAID while theUnit continues to record.

7. Viewing Speed

Min 400 image/ Sec

8. Play Back shall support instant playback and shall have programmable favorite channel selection.

9. Zoom The recorder shall allow a minimum of 6 X digital zoomon playback

10. Operation Full Duplex11. Scheduling The recorder shall provide an

extremely flexible scheduling on a week-by-week basis. Each 24-hour period shall be divided into 15-minute blocks enablingdifferent configurations of recording triggers to beavailable during each 15-minute period.

12. Resolution 1280x1024. Shall support CIF / 2CIF and 4 CIFResolutions while recording.

13. Recording The recording should be based on motion detection


Standard wall mount

Page 236 of 355


12.6 DVR 8 channel


Compliance (Y/N)



7. Viewing Speed

Min 400 image/ Sec








Standard wall mount

Page 237 of 355


12.7 DVR 16 channel


Compliance (Y/N)



7. Viewing Speed

Min 400 image/ Sec








Standard wall mount

Page 238 of 355


12.8 DVR 32 channel


Compliance (Y/N)



7. Viewing Speed

Min 400 image/ Sec








Standard wall mount

Page 239 of 355


12.9 Surveillance System Accessories


Compliance (Y/N)

1. Power Cable Three phase power supply2. RG 59 cable Co-axial Unarmoured Cable.3. Conduit Pipe 25 mm PVC4. Conduit Pipe 50 mm PVC5. RG 6 Video unarmoured cable6. BNC

connector50 ohm

7. BNC Connector

75 ohm

8. Switches NA

Page 240 of 355


13. Switches – Technical Specifications

13.1 12 Core Switch


Compliance (Y/N)



3. General Requirements

Modular chassis based switch.

Shall have minimum 10 slots with redundant CPU/Switch fabric

Should have centralized/distributed switching architecture, each module should be provisioned with adequate hardware/software to support the same.

Shall have CPU and power supply redundancy

The core switch should support new technologies like MPLS, EoMPLS/Metro Ethernet in hardware with firmware upgrade only without upgrading the switching fabric and line modules.

4. Performance Dual Redundant Switch Fabric/CPU should offer minimum 2 Tbps switch fabric capacity per switch. There should not be any performance degradation in case of any switching/routing engine failure

In the event of failure of one switching/routing engine, forwarding should not stop and failover from one engine to other should be statefull

The proposed switch should support simply the changes through In-Service OS upgrade mechanism with a minimal disruption of traffic through

Page 241 of 355



Compliance (Y/N)

upgrade process.

Should have in built capability of IP SLA initiator and responser functionality

The proposed switch should support Netflow or J-flow or equivalent. If it is given as services on a module, at least two of those modules shall be quoted to ensure redundancy of the solution.

Minimum 350 Mpps forwarding rate should be supported.

Should be capable of 80 Gbps of switching capacity per slot

Shall have hardware based unicast, multicast and broadcast suppression.

Shall support multi-layer switching, Layer 2 (MAC), Layer 3 (IP address) and Layer 4 (TCP UDP port) switching and application classification and redirection

Shall support minimum 8 hardware queues per port for classification and scheduling of network traffic on a packet-by-packet basis

Shall support Hot-swappable power supplies and switching modules

5. Layer 1 Features

Support for 10/100/1000 BASE-T, 1000 BASE-SX, LX, LH ,ZX GBIC/SFP and 10-Gig SR/LR/ZR

Chassis shall support minimum 336 Gigabit ports or 60 Nos. of 10-Gig ports non blocking ports.

6. Layer 2 Features

Shall have Layer 2 switch ports and VLAN trunks

Shall have IEEE 802.3 ad Link aggregation and port Trunking

Page 242 of 355



Compliance (Y/N)

across line cards

Shall have IEEE 802.1Q VLAN encapsulation

Should support Secure VTP with MD5 or equivalent protocol to reduce administrative burden of configuring VLANs on multiple switches in turn eliminating the configuration errors & troubleshooting in secure manner

Should be able to discover the neighbouring device of the same vendor giving the details about the platform, IP Address, Link connected through etc, thus helping in troubleshooting connectivity problems or equivalent

Should support a mechanism to detect connectivity issues with both fiber and copper cabling to ensures that a partially failed link is shut down on both sides, to avoid L2/L3 protocol convergence issues

Should support Layer 2 trace route to ease troubleshooting by identifying the physical path that a packet takes from source to destination

Should support extensive debugging including layer 2 debugging for troubleshooting

Should support display and clear MAC address information in MAC Address Table

Shall have IEEE compliance for 802.1Q VLAN, 801.2p, 802.1d STP, 802.3ad, 802.1w RSTP, 802.1s MSTP, 802.3ad LACP, IEEE 802.1ab Link Layer Discovery Protocol.

Shall have 128,000 MAC addresses

Page 243 of 355



Compliance (Y/N)

Shall have minimum 4000 active VLAN support

7. Layer 3 Features

Shall have basic Routing-Static IP routing, RIP v1/v2, RIPng and policy based routing

Shall have hardware enabled advance IP routing protocols OSPF, OSPFv3, BGPv4, PIM-SM, PIM-DM , PIM-SSM etc.

Shall have VRRP or equivalent for redundancy

Shall have IGMP v1, v2, v3

Shall have IP multicast routing protocols PIM

Should support multicast features like PIM RP accept filter, PIM neighbour filter, multicast route limit, Bidir PIM, multicast multipath. Should support minimum 128K IPv4 and 64K IPv6 multicast entries.

Should support MPLS Provider/Provider Edge functionality

Should support MPLS VPN, MPLS mVPN (Multicast VPN), MPLS Class of Service (CoS), VRF-Aware Services (Telnet, ICMP, DHCP, IPsec, Syslog), Carrier Supporting Carrier (CsC), MPLS TE (Fast re-route), DiffServ-Aware TE, Inter-AS VPNs).

Should support minimum 256K IPV4 and 128K IPV6 routes

Should support 128K multicast routes

Support VRF-Lite for L3 virtualization

MLD Snooping for IPv6 in hardware

Page 244 of 355



Compliance (Y/N)

8. QoS Features Shall have sophisticated QoS and Traffic Management

Shall have Per-port QoS configuration

Support for IEEE 802.1p QoS policies.

Support for Diff Serv QoS on all ports

Shall support minimum four queues per port in hardware

Shall have Advance security – DOS and NAT

Shall have priority queuing

Shall have IP differentiated service code point (DSCP) and IP precedence

Shall have classification and marking based on full Layer 3, 4 headers

Shall have input and output policing based on Layer 3, 4 headers.

Shall support Congestion Avoidance feature

9. Availability Should be provided with Dual Switching Fabric and any failure of one CPU/Fabric should not result in loss of capacity to 2 Tbps and 720 Mpps per switch

N+1 / 1+1 Redundant Power Supply from day one

Hot Swap ability on all modules and Power Supply

Hot Swappable Fan tray

10. Security Shall have Filters/Access-List on all ports

Shall have 802.1x user authentication

Page 245 of 355



Compliance (Y/N)

Shall have 802.1x accounting

Should support Port Mirroring based on port basis / vlan basis to support intrusion prevention system deployment in different VLANs. Should support port mirroring across the switches to remotely monitor ports in a Layer 2 switch network from any other switch in the same network

Should support DHCP snooping to allow administrators to ensure consistent mapping of IP to MAC addresses

Should prevents IP spoofing by forwarding only packets that have a source address consistent with the DHCP Snooping table

Should be able to shut down Spanning Tree Protocol PortFast-enabled interfaces when BPDUs are received to avoid accidental topology oops

Should be able to prevent edge devices not in the network administrator's control from becoming Spanning Tree Protocol root nodes

Shall have TACACS+/RADIUS enabled.

Shall have SSHv1 , SSHv2, SNMPv1, SNMPv2, SNMPv3 and NTP support

Shall have Management Access Filter (Access Policies)

11. Ports Required Each Chassis shall provide 12 x 10-Gig ports supporting SR/LR/ZR transceivers distributed across minimum two or more line cards

Should have minimum 40 ports 1000 Base SFP modules

Page 246 of 355



Compliance (Y/N)

supporting SX, LX/LH, -ZX, -T transceivers distributed across minimum two or more line cards

Should have minimum 2 x 48 port 10/100/1000 Base-T modules

Page 247 of 355


13.2 12 Distribution Switch – Fixed Configuration


Compliance (Y/N)

1. Hardware Features

The switch should be modular or chassis based and should be flexible enough for deploying 24 SFP+ ports which can be used for 10G/1G Ethernet as per the requirement.

The switch should provide 24-ports of 10 Gigabit Ethernet Small Form-Factor Pluggable Plus (SFP+) Day 1. SI need to provid etransceivers for SFP+ ports as per the solution.

The Switch shall provide inbuilt redundant hot swappable fans and power supplies for highest resiliency with no single point of failure.

2. Performance and capabilities

Switch should offer minimum 480-Gbps switching capacity.

Synthetic traffic generation and monitoring through built-in IP SLA capabilities

The proposed switch should support Netflow or J-flow or equivalent.

Should support 120 Mpps of forwarding rate

Should support multicast in hardware

Shall have hardware based unicast, multicast and broadcast suppression.

Shall support multi-layer switching, Layer 2 (MAC), Layer 3 (IP address) and Layer 4 (TCP UDP port) switching and application classification and redirection

Shall support minimum 8 hardware queues per port for classification and scheduling of network traffic on a packet-by-

Page 248 of 355



Compliance (Y/N)

packet basis and minimum of 64 CPU queues

While deployed in redundancy i.e two switches, the switch should have support for virtualization by working as single virtual switches providing double the system bandwidth capacity and should eliminate the dependence on First Hop Redundancy Protocols (FHRP) and Spanning Tree Protocol.

While deployed as Virtual switching system with two switches, switches should have support for maximum resiliency with Nonstop Forwarding, Stateful Switchover, and In-Service Software Upgrade (ISSU) support

3. Layer 2 Features

Shall have Layer 2 switch ports and VLAN trunks

Shall have IEEE 802.3 ad Link aggregation and port trunking across line cards

Shall have IEEE 802.1Q VLAN encapsulation

Should support minimum 10K instance of spanning tree

Should Support Automatic mechanism to ensure that once QoS enabled on switch then it will prioritize voice traffic independent of QoS on each and every port.

Should support Secure VTP with MD5 or equivalent protocol to reduce administrative burden of configuring VLANs on multiple switches in turn eliminating the configuration errors & troubleshooting in secure manner

Should be able to discover the neighbouring device of the

Page 249 of 355



Compliance (Y/N)

same vendor giving the details about the platform, IP Address, Link connected through etc, thus helping in troubleshooting connectivity problems or equivalent

Should support a mechanism to detect connectivity issues with both fiber and copper cabling. Ensures that a partially failed link is shut down on both sides, to avoid L2/L3 protocol convergence issues

Should support Layer 2 trace route to ease troubleshooting by identifying the physical path that a packet takes from source to destination

Should support layer 2 debugging for troubleshooting

Display and Clear MAC address information in MAC Address Table

Switch ports should automatically detects the type of device connected and offers a best-practices configuration to the ports

Shall have IEEE compliance for 802.1Q VLAN, 801.2p, 802.1d STP, 802.3ad, 802.1w RSTP, 802.1s MSTP, RPVST+,802.3ad LACP, IEEE 802.1ab, Link Layer Discovery Protocol.

Shall have 55K Media Access Control (MAC) Entries

Shall have minimum 4000 VLAN including port-based, source MAC based, protocol based and subnet based VLANs.

4. Layer 3 Features

Shall have basic Routing-Static IP routing, RIP v1/v2, RIPng

Page 250 of 355



Compliance (Y/N)

and Policy Based Routing.

Shall have hardware enabled advance IP routing protocols OSPF, OSPFv3, BGPv4, PIM-SM, PIM-DM , PIM-SSM etc.

Shall have VRRP or equivalent for redundancy

Shall have IGMP v1, v2, v3

Should support multicast features like PIM RP accept filter, PIM eighbour filter, multicast route limit, Bidir PIM, multicast multipath.

Support VRF-Lite and Multicast VRF-Lite

Ipv4 and Ipv6 support in hardware, providing wire-rate forwarding for Ipv6 networks. Should support minimum 32 Ipv4 and 32 Ipv6 entries.

MLD Snooping for Ipv6 in hardware

5. QoS Features Shall have sophisticated QoS and Traffic Management

Shall have Per-port QoS configuration

Support for IEEE 802.1p QoS policies.

RFC 2474 based Diff Serv QoS on all ports

Shall support 8 queues per port in hardware and 128K Security and QoS Hardware Entries

Shall have strict priority queuing.

Shall have IP differentiated service code point (DSCP) and IP precedence

Shall have classification and marking based on full Layer 3,

Page 251 of 355



Compliance (Y/N)

4 headers

Shall have input and output policing based on Layer 3, 4 headers.

Shall support Congestion Avoidance feature

Shall provide Local and Remote Port Mirroring

6. Security Features

Support for Admission Control features for end-point security (PCs & Desktop Posture Assessment) and thereby controlling the spread of viruses & worms

RADIUS, which allow centralized control of the switch and restrict unauthorized users from altering the configuration

Standard and extended ACLs on all ports

802.1x user authentication (with VLAN assignment and Guest VLAN extensions)

Router ACLs (RACLs) on all ports (no performance penalty), VLAN ACLs (VACLs),Port ACLs (PACLs)

Private VLANs (PVLANs) on access and trunk ports

Dynamic Host Configuration Protocol (DHCP) snooping and Option82 insertion

Port Security, Secure Shell (SSH) Protocol versions 1/2

Unicast MAC filtering, Unicast port flood blocking

Dynamic Address Resolution Protocol (ARP) inspection, IP source guard

Switch should Support Ipv6 First hop Security with the

Page 252 of 355



Compliance (Y/N)

following functions: IPv6 snooping, IPv6 FHS binding, neighbour discovery protocol (NDP) address gleaning, IPv6 data address gleaning, IPv6 dynamic host configuration protocol (DHCP) address gleaning, IPv6 device tracking, neighbour discovery (ND) Inspection, IPv6 DHCP guard, IPv6 router advertisement (RA) guard

7. Management Features

The switch should support NetFlow or equivalent and IP SLA for enhanced visibility.

Configuration Rollback for improved configuration management

Single console port and single IP address to manage all features of the system

Manageability through common network-management software on a per-port and per-switch basis, providing a common management interface for routers, switches of the same vendor

Support for SNMP versions 1, 2, and 3

Remote Monitoring (RMON) software agent to support four RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis. Support for all nine RMON groups through the use of a mirrored port, which permits traffic monitoring of a single port, a group of ports, or the entire switch from a single network analyzer or RMON probe

Analysis support, including ingress port, egress port, and

Page 253 of 355



Compliance (Y/N)

VLAN mirroring

Support for sFlow / NetFlow or equivalent for Deep traffic & session flow analysis.

Support for Port Mirroring, Remote Mirroring & ACL filtering for Port mirroring used for IDS functionalities.

Page 254 of 355


13.3 8 port Layer 2 Managed Switch Non- POE


Compliance (Y/N)

1. Switch Architecture and Performance

Switch should have 8 Nos. 10/100/1000Base-TX auto-sensing ports plus 2 x 1G copper or 1G SFPSwitch should have non-blocking wire-speed architecture.Switch should support IPv4 and IPv6 from day OneSwitch should have switching fabric of minimum 10 Gbps or more.Switch should have Forwarding rate of minimum 13 Mpps.

2. Layer 2 Features IEEE 802.1Q VLAN tagging.802. 1Q VLAN on all ports with support for minimum 255 active VLANs and 4k VLAN idsSupport for minimum 8k MAC addressesSpanning Tree Protocol as per IEEE 802.1dMultiple Spanning-Tree Protocol as per IEEE 802.1sRapid Spanning-Tree Protocol as per IEEE 802.1wSelf learning of unicast & multicast MAC addresses and associated VLANsJumbo frames up to 9000 bytesLink Aggregation Control Protocol (LACP) as per IEEE 802.3ad.Port mirroring functionality for measurements using a network analyzer.Switch should support IGMP v1/v2/v3 as well as IGMP v1/v2/v3 snooping.

3. Quality of Service (QoS) Features

Switch should support classification and scheduling as per IEEE 802.1P on all ports.Switch should support DiffServ as per RFC 2474/RFC 2475.Switch should support four

Page 255 of 355



Compliance (Y/N)

hardware queues per port.Switch should support QoS configuration on per switch port basis.Switch should support classification and marking based on IP Type of Service (TOS) and DSCP.Switch should provide traffic shaping and rate limiting features (for egress as well as ingress traffic) for specified Host, network, Applications etc.Strict priority queuing guarantees that the highest-priority packets are serviced ahead of all other traffic.

4. Security Features Switch should support MAC address based filters / access control lists (ACLs) on all switch ports.Switch should support Port as well as VLAN based Filters / ACLs.Switch should support RADIUS and TACACS+ for access restriction and authentication.Secure Shell (SSH) Protocol, HTTP and DoS protectionIP Route Filtering, ARP spoofing, DHCP snooping etc.Should support DHCP snooping, DHCP Option 82, Dynamic ARP Inspection (DAI)Should support a mechanism to shut down Spanning Tree Protocol PortFast-enabled interfaces when BPDUs are received to avoid accidental topology loops.Should support a mechanism to prevent edge devices not in the network administrator's control from becoming Spanning Tree Protocol root nodes.Switch should support static

Page 256 of 355



Compliance (Y/N)

ARP, Proxy ARP, UDP forwarding and IP sourceguard.Switch should Support Ipv6 First hop Security with the following functions: IPv6 snooping, IPv6 FHS binding, neighbor discovery protocol (NDP) address gleaning, IPv6 data address gleaning, IPv6 dynamic host configuration protocol (DHCP) address gleaning, IPv6 device tracking, neighbor discovery (ND) Inspection, IPv6 DHCP guard, IPv6 router advertisement (RA) guard

5. Management, Easy-to-Use Deployment and Control Features

Switch should have a console port with RS-232 Interface for configuration and diagnostic purposes.Switch should be SNMP manageable with support for SNMP Version 1, 2 and 3.Switch should support all the standard MIBs (MIB-I & II).Switch should support TELNET and SSH Version-2 for Command Line Management.Switch should support 4 groups of embedded RMON (history, statistics, alarm and events).Switch should support system and event logging functions as well as forwarding of these logs to multiple syslog servers.Switch should support Online software reconfiguration to implement changes without rebooting. Any changes in the configuration of switches related to Layer-2 & 3 functions, VLAN, STP, Security, QoS should not require rebooting of the switch.Support for Automatic Quality of Service for easy

Page 257 of 355



Compliance (Y/N)

configuration of QoS features for critical applications.Support for Unidirectional Link Detection Protocol (UDLD) to detect unidirectional links caused by incorrect fiber-optic wiring or port faults and disable on fiber-optic interfacesSwitch should have comprehensive debugging features required for software & hardware fault diagnosis.Layer 2 trace route eases troubleshooting by identifying the physical path that a packet takes from source to destination.Should support DHCP Server feature to enable a convenient deployment option for the assignment of IP addresses in networks that do not have without a dedicated DHCP server.Switch should support Multiple privilege levels to provide different levels of access.Switch should support NTP (Network Time Protocol)Switch should support FTP/ TFTP

6. Standards RoHS Compliant.IEEE 802.1x support.IEEE 802.3x full duplex on 10BASE-T and 100BASE-TX ports.IEEE 802.1D Spanning-Tree Protocol.IEEE 802.1p class-of-service (CoS) prioritization.IEEE 802.1Q VLAN.IEEE 802.3u 10 BaseT / 100 Base Tx /1000 Base Tx.

7. Industry Standards & Certifications

The Router & the operating system should be minimum EAL2 / Applicable Protection Profile certified under the Common Criteria Evaluation

Page 258 of 355



Compliance (Y/N)

Program

Page 259 of 355


13.4 12 Port Switch


Compliance (Y/N)



3. Standards IEEE 802.1D IEEE 802.1p IEEE 802.1Q IEEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.1ab IEEE 802.1ad IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3z RFC 854 RFC 951 RFC 1305 / RFC2030

4. Protocol CSMA/CD

5. Data Transfer Rates

Non Blocking Architecture

6. Network Cables

10BASE-T: UTP Cat. 3, 4,5 (100 m) EIA/TIA-586 100-ohm STP (100 m)100BASE-TX: UTP Cat. 5(100 m) EIA/TIA-568 100-ohm STP (100m max.)

7. Number of Ports

10/100Mbps port x 12

8. MAC Address Learning

Automatic update

9. Power Supply 100 - 240 VAC, 50/60 Hz

10. Security Should support

a) 802.1x

b) AAA

c) SSH v1, v2

d) SSL

e) Host to Host and Switch to Switch authentication

Page 260 of 355



Compliance (Y/N)

11. Management Should have

a. IPv6 management

capability

b. SNMP v1, v2, v3

c. RMON

d. RADIUS

e. CLI via console

f. Web interface

12. Uplink Ports Switch should have 2 dual purpose uplink ports (10/100/1000 or SFP)

13. Switch Fabric 12 Gbps or higher (12 Gigabit ports 12x2)

14. Memory 256 MB RAM or higher

15. Packet Buffer 2MB or higher

16. MAC Address Table

12K Entries or higher

17. Routing Table 10k or higher routing entries

18. Emissions FCC Class A, VCCI, UL, IEC, EN 61000

19. Power Supply Internal field replaceable redundant power supply

20. Management CLI via console, Web-based configuration and management,

Page 261 of 355


13.5 24 Port Switch


Compliance (Y/N)




4. Protocol CSMA/CD



6. Network Cables


7. Number of Ports



Automatic update



a) 802.1x

b) AAA

c) SSH v1, v2

d) SSL

e) Host to Host and Switch

to Switch authentication

Page 262 of 355



Compliance (Y/N)


a. IPv6 management capability

b. SNMP v1, v2, v3

c. RMON

d. RADIUS

e. CLI via console

f. Web interface

g. Provision of software and firmware upgrades with latest version releases through admin login

Managed 24-Port Gigabit L3 Switch with a dedicated console port for management

12. Uplink Ports Switch should have 2 dual purpose

uplink ports (10/100/1000 or SFP)


14. Packet Forwarding Rate

32 Mpps or higher









Page 263 of 355


13.3 48 Port Switch


Compliance (Y/N)




4. Protocol CSMA/CD



6. Network Cables


7. Number of Ports



Automatic update



a) 802.1x

b) AAA

c) SSH v1, v2

d) SSL

e) Host to Host and Switch

to Switch authentication

Page 264 of 355



Compliance (Y/N)


a. IPv6 management capability

b. SNMP v1, v2, v3

c. RMON

d. RADIUS

e. CLI via console

f. Web interface

g. Provision of software and firmware upgrades with latest version releases through admin login

Managed 48-Port Gigabit L3 Switch with a dedicated console port for management

12. Uplink Ports Switch should have 2 dual purpose

uplink ports (10/100/1000 or SFP)


14. Packet Forwarding Rate

32 Mpps or higher









Page 265 of 355


14. Router – Technical Specifications

14.1 Router – Entry Level


Compliance (Y/N)

1. General Architecture

The router should be based on multi-Core processors & have a multi-gigabit Fabric for efficient module to module communicationRouter should support on-board hardware encryption acceleration for Ipsec & SSL VpnsRouter should have atleast two 10/100/1000 and two SFP-based Routed portsRouter should support default memory of 1GB Ram & scalable up to 2Gb RamRouter should support default flash of 256Mb & scalable up to 4GBRouter should have atleast 4 slots

Page 266 of 355



Compliance (Y/N)

for additional modulesRouter should have support for WAN Interfaces like, High-Speed Serial, Sync/Async Interface, ISDN, 3G interfaces, 8-port Gigabit POE Ethernet Switch Modules, Giga ethernet Routed ports & G.703 interfacesshould support embedded hardware encryption acceleration, voice- and video-capable digital signal processor (DSP) slots or equivalentShould have support for in-built redundant power supplyRouter performance should atleast 1800Kpps on 64-Byte packetRouter should support hardware based IPSec performance of atleast 500 Mbps scalable to 1 Gbps with additional hardware/ Software

2. Routing Protocols

Router should support following routing protocols & features:

RIP, OSPF, BGP,ISIS, Policy based routing, should support un-equal cost load-balacing & un-equal cost load-sharing mechanism, should support functionality to route packets based on Delay, loss, reachability, throughput, jitter & Mean opinion score, Bi-directional forwarding detection support, MPLS

3. IPv6 Routing Features

Router should support following IPv6 Features : Ripng, OSPFv3, IPv6 support for ISIS, IPv6 support for BGP, IPv6 policy based routing, IPv6 Dual Stack, IPv6 automatic 6 to 4 tunnels, IPv6 vpns over MPLS 6vpe

4. High Availability Features

Router should support high-availability protocols like VRRP/HSRP, Should support the functionality to active/active gateway load balancing for IPv4 & IPv6, IPv6 support for HSRP/VRRP

5. Multicast Features

Should support multicast BGP, Multicast NAT, Multicast Source Discovery Protocol, PIM, Source Specific Multicast, IGMPv3, IPv6 Multicast, MLD v2, IPv6 Bi-

Page 267 of 355



Compliance (Y/N)

directional PIM, MSDP, IGMP V3, IPv6 Pim SM & Pim SSM,

6. VPNS & Tunneling Features

L2tp, L2tpV3, Ipsec Vpn, SSL VPN, should support the functionality of forming dynamic tunneless Vpn using GDOI Protocol, should support Suite-B cryptograpghy algorithms for advance security, should support IKEv2, should support ipv6 for IPsec & Ikev2, Should support 3Des, AES, MD5, SHA-1 algorithms, support GRE protocol

7. Qos Features Should support the functionality of recognizing network based applications passing through router & provide statictics of traffic usage, Qos for VPN, Flow based WRED, Class based policing & shaping, DSCP based marking & classification, IPv6 Packet classification & Marking, IPv6 Policing & Shaping, IPv6 Queuing, RSVP, Should support Hierarchical Queuing Framework , Qos policy propogation via BGP, Should support percentage based policing & shaping,


Router sould support stateful zone based firewall, Should support IPS functionality with support for automatic signature updates, Should support inline IPS functionality, Should support IPv6 Stateful firewall, Should support in-built certificate server for digital certificates, should support firewall rules based on user identity, should support control plane policing to prevent dos attacks on the router, Should support VRF aware firewall & transparent firewall functionality

9. Network Management Features

Router should support embedded Packet Capture to capture packet data flowing through, to, and from the device to an internal buffer.

Router should support the ability to monitor events and take informational, corrective action

Page 268 of 355



Compliance (Y/N)

when the monitored events occur or when a threshold is reached.

Should support Netflow/ Equivalent to provide data to enable network and security monitoring, network planning, traffic analysis, and IP accounting.

Should support SNMPv3, SNMP over IPV6, RMON four groups,

Should support the functionality of measuring service level indicators including delay, jitter & availability

Should support functionality to monitor network performance for VOIP, Video & VPN Network monitoring

Page 269 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________14.2 Router – Mid Level


Compliance (Y/N)


The router should be based on multi-Core processors & have a multi-gigabit Fabric for efficient module to module communicationRouter should support on-board hardware encryption acceleration for Ipsec & SSL VpnsRouter should have atleast two 10/100/1000 and two SFP-based Routed portsRouter should support default memory of 1GB Ram & scalable up to 2Gb RamRouter should support default flash of 256Mb & scalable up to 4GBRouter should have atleast 4 slots for additional modulesRouter should have support for WAN Interfaces like, High-Speed Serial, Sync/Async Interface, ISDN, 3G interfaces, 8-port Gigabit POE Ethernet Switch Modules, Giga ethernet Routed ports & G.703 interfacesshould support embedded hardware encryption acceleration, voice- and video-capable digital signal processor (DSP) slots or equivalentShould have support for in-built redundant power supplyRouter performance should atleast 1800Kpps on 64-Byte packetRouter should support hardware based IPSec performance of atleast 500 Mbps scalable to 1 Gbps with additional hardware/ Software

2. Routing Protocols

Router should support following routing protocols & features: RIP, OSPF, BGP,ISIS, Policy based routing, should support un-equal cost load-balacing & un-equal cost load-sharing mechanism, should support functionality to route packets based on Delay, loss, reachability, throughput, jitter & Mean opinion score, Bi-directional forwarding detection support, MPLS

S. No. Features Specifications Specifications offered Compliance

Page 270 of 355



Compliance (Y/N)



by the OEM / Vendor (Y/N)


Router should support following IPv6 Features : Ripng, OSPFv3, IPv6 support for ISIS, IPv6 support for BGP, IPv6 policy based routing, IPv6 Dual Stack, IPv6 automatic 6 to 4 tunnels, IPv6 vpns over MPLS 6vpe


Router should support high-availability protocols like VRRP/HSRP, Should support the functionality to active/active

Page 271 of 355



Compliance (Y/N)



gateway load balancing for IPv4 & IPv6, IPv6 support for HSRP/VRRP


Should support multicast BGP, Multicast NAT, Multicast Source Discovery Protocol, PIM, Source Specific Multicast, IGMPv3, IPv6 Multicast, MLD v2, IPv6 Bi-directional PIM, MSDP, IGMP V3, IPv6 Pim SM & Pim SSM,

6. VPNS & Tunneling Features

Should support following VPN Protocols & Features : L2tp, L2tpV3, Ipsec Vpn, SSL VPN,

Page 272 of 355



Compliance (Y/N)



should support the functionality of forming dynamic tunneless Vpn using GDOI Protocol, should support Suite-B cryptograpghy algorithms for advance security, should support IKEv2, should support ipv6 for IPsec & Ikev2, Should support 3Des, AES, MD5, SHA-1 algorithms, support GRE protocol

7. Qos Features Should support the functionality of recognizing network based applications passing through router

Page 273 of 355



Compliance (Y/N)



& provide statictics of traffic usage, Qos for VPN, Flow based WRED, Class based policing & shaping, DSCP based marking & classification, IPv6 Packet classification & Marking, IPv6 Policing & Shaping, IPv6 Queuing, RSVP, Should support Hierarchical Queuing Framework , Qos policy propogation via BGP, Should support percentage based policing & shaping

S. No. Features Specifications Specifications offered by Compliance

Page 274 of 355



Compliance (Y/N)



the OEM / Vendor (Y/N)


Router should support following security features: Router sould support stateful zone based firewall, Should support IPS functionality with support for automatic signature updates, Should support inline IPS functionality, Should support IPv6 Stateful firewall, Should support in-built certificate server for digital certificates, should support firewall rules based on user identity, should

Page 275 of 355



Compliance (Y/N)



support control plane policing to prevent dos attacks on the router, Should support VRF aware firewall & transparent firewall functionality,

9. Network Management Features

Router should support embedded Packet Capture to capture packet data flowing through, to, and from the device to an internal buffer.Router should support the ability to monitor events and take informational, corrective action when the monitored events occur or when a threshold is reached.Should support Netflow/ Equivalent to

Page 276 of 355



Compliance (Y/N)



provide data to enable network and security monitoring, network planning, traffic analysis, and IP accounting.Should support SNMPv3, SNMP over IPV6, RMON four groups,Should support the functionality of measuring service level indicators including delay, jitter & availabilityShould support functionality to monitor network performance for VOIP, Video & VPN Network monitoring

10. Industry Standards &

The Router & the operating system should be minimum EAL3 /

Page 277 of 355



Compliance (Y/N)



Certifications Applicable Protection Profile certified under the Common Criteria Evaluation Program

Page 278 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________14.3 Router – High Level

S. No. Features Specifications Specifications offered

by the OEM / VendorCompliance

(Y/N)

1. Functional Requirements

1:1 route processor/control processor redundancy, 1:1/1:N switch fabric and PSU redundancy and 1:1 service module redundancy

The processing engine architecture must be multi processor based for enhanced performance.

The router must support intelligent traffic management and QoS features to allocate network resources on application needs and QoS priorities.

Onboard support for intelligent traffic measurement and analysis. The router must support flow based traffic analysis feature.

The router must have hardware assisted Network Address Translation (NAT) capability as per RFC 1631.


Backplane Architecture: modular and redundant. The back plane bandwidth must be 40Gbps

Number of Slots: 12 The router must have

redundant power supply module. The router must support 220V AC or -48V DC power supply module.

The router processor architecture must be multi processor based and should support hardware accelerated, parallelized and programmable IP forwarding and switching.

The router in the event of failure of any one processor should switch over to the redundant processor without dropping any traffic flow.

The failover time between the primary and redundant fabric be less than 50ms

3. Router Performance

Should support up to 18 Mpps of Forwarding performance

Page 279 of 355




(Y/N)

Routing Table Size: The router must support 4,000,000 IPv4 or 4,000,000 IPv6 routes entries in the routing table.

The router should support uninterrupted forwarding operation for OSPF, IS-IS routing protocol to ensure high-availability during primary controller card failure.

The router should provide 10 Gbps of IPSec throughput and should support minimum of 8000 IPSec Tunnel


Should support IP version 6 in hardware.

Should support IPv6 static route, OSPFv3, IS-IS support for IPv6, Multiprotocol BGP extensions for IPv6, IPv6 route redistribution.

The router shall support dual stack IPv6 on all interfaces and IPv6 over IPv4 tunneling, IPv6 Multicast protocols – Ipv6 MLD, PIM-Sparse Mode, and PIM – SSM,Pv6 Security Functions – ACL, IPv6 Firewall, SSH over IPv6, MPLS Support for IPv6 - IPv6 VPN over MPLS (6VPE) Inter-AS options, IPv6 VPN over MPLS (6VPE), IPv6 transport over MPLS (6PE)

The router should support for IPv6 Multicast.

Should support IPv6 Quality of Service

Should perform IPv6 transport over IPv4 network (6 to4 tunneling).

Should support SNMP over IPv6 for management.


The Router solution must be a carrier-grade Equipment supporting the following:

Hitless interface protection No single point of failure In-band and out-band

management

Page 280 of 355




(Y/N)

Software rollback feature Performance measurement Graceful Restart for OSPF,

BGP, LDP, MP-BGP etc. Stack Group Bidding

Protocol Service Interface Gateway The proposed switch should

support modular OS and simply the changes through In-Service OS upgrade mechanism

6. Physical Interface Support

The router line card must support following interface as defined in the IEEE, ITU-T:

Fast Ethernet - 10BaseT/100BaseT Ethernet as defined in IEEE 802.3

Gigabit Ethernet - 1000BaseSX, 1000BaseLX, 1000BaseZX as defined in IEEE 802.3

Framed/Un-Framed E1 as defined in ITU-T G.703/G.704.

Should support V.35 serial interfaces for Satellite Links for speeds of nx64Kbps up to 2Mbps.

Framed /Un-Framed E3 as defined in ITU-T recommendation G.703 and physical layer using 75 Ohm coaxial cable with BNC connectors.

Packet over SONET/SDH as defined in ITU-T G.957 and G.958. Router must support STM-1, STM-4 and STM-16 packet over SDH (PoS) interfaces. Optical ports must support Automatic Protection Switching (APS) as defined in the GR-253 Core. Both bi-directional and unidirectional mode must be supported.

The router should support Channelized STM1 interfaces to aggregate multiple E1 / sub-rate E1 circuits coming in from remote locations.

10 Gigabit Ethernet interface.

Page 281 of 355




(Y/N)

The Router should have Following ports from Day1:-4X 1000BaseT-6x1000 BAseX with SX, LX/LH Optics


The router must support Protocol Independent Multicast Dense Mode (PIM-DM) and Sparse Mode (PIM-SM).

The multicast implementation must support source specific multicast.

The router must support IGMPv2 and IGMPv3.

The router must support Multicast Listener Discovery (MLD) v2 and MLD for IPv6 as defined in RFC 2710.

The router must support multicast load balancing traffic across multiple interfaces.

The router must support Multicast Source Discovery (MSDP) as defined in RFC 3618.

The router must support Any cast Rendezvous Point (RP) mechanism using PIM and Multicast Source Discovery Protocol (MSDP) as defined in RFC 3446.

The router must support RFC 3618 Multicast Source Discovery Protocol (MSDP).

8. Qos Features The router should support at least 3-level hierarchical QoS to facilitate the end-user to deploy per-port, per-application, per-user QoS. The router should have at least 32,000 hardware queues to facilitate such deployment.

The router must be capable of doing Layer 3 classification and setting ToS/Diffserve bits on incoming traffic using configured guaranteed rates and traffic characteristics. The marking of the

Page 282 of 355




(Y/N)

ToS/Diffserve bits should be non-performance impacting.

The router should support the following DiffServe standards –

RFC 3260 - New Terminology and Classifications for DiffServ

RFC 3246 - An Expedited Forwarding PHB

RFC 2597 - Assured Forwarding PHB Group

RFC 2475 - An Architecture for Differentiated Services

RFC 2474 - Definition of the DiffServ Field in the IPv4 & IPv6 headers

All queuing and scheduling feature must be configurable as Per Hop Behavior (PHB).

Queuing and Scheduling must be able to be configured on as per physical port or logical port basis.

The router must support flow based rate limiting method based on per source address, destination address or both.

Queuing must support Random Early Detection (RED) as the method for providing intelligent packet discards to provide the congestion avoidance.

Queuing must allow for Weighted Random Early Detection (WRED) as the method for providing intelligent packet discards to provide the congestion avoidance mechanism.

Scheduling should allow for round robin and weighted round robin.

The scheduling mechanism must allow for expedited or strict priority routing for all high priority traffic.

The scheduling mechanism must allow for alternate priority routing traffic necessary to keep from

Page 283 of 355




(Y/N)

starving other priority queues.

All network based keep alives (PPP keep alives, OSPF LSAs, BGP updates etc) must be given the highest priority and route before any traffic type.

The router must provide facility to prioritize the SNMP traffic.

The traffic must be able to be prioritized into 8 class types. Class types must be able to be mapped into 1 of 8 bandwidth constraints. Bandwidth Constraints should be assignable to in individual hardware queues. Oversubscription rates for bandwidth constraints should have local significance only.

The router shall support at least 128,000 queues per interface to offer granular QoS, policing and shaping capabilities.

The router switching fabric must be non-blocking even during a failure and must not require additional queuing and scheduling inside the box.

The router must support Resource Reservation Protocol (RSVP).


CPU Rate Limiters for Denial of Service (DoS) attacks.

Should support Access Control Lists at layer 2-4 in hardware. The access list parameters may be any combination of source and destination IP or subnet, protocol type (TCP/UDP/IP etc), source and destination port. There should not be any impact on the router performance upon enabling Access Lists.

It desirable to have support for reflexive Access Control Lists for enhanced security.

Page 284 of 355




(Y/N)

The router must support unicast Reverse Path Forwarding (uRPF) feature. The enablement of uRPF feature should not degrade the performance of the router.

The router must support MD5 authentication for RIP, OSPF, IS-IS and BGP.

The router must support IP Access Lists to limit telnet and SNMP access to the router.

Should support Controlled SNMP access through the use of SNMP V3 with authentication.

Implement control configuration on the router to ensure SNMP access only to the SNMP manager or the NMS workstation through access lists.

The router should support multiple levels of access or role based access mechanisms.

Should support CPU Rate limiting and control plane policing feature to make sure the router is always available for management.

The proposed router should have embedded support for 4000 IPsec tunnels from day one, which can be activated by either a software/license upgrade anytime in future.

10. Industry Standards & Certifications

The Router & the operating system should be minimum EAL3 / Applicable Protection Profile certified under the Common Criteria Evaluation Program

Page 285 of 355


15. Leased Line Modem Pair – Technical Specifications


Compliance (Y/N)



3. Modem V35 2-Wire, Standalone, V.35 Interface, Ethernet (UTP) Port for Management, Supports 220 to 240V

4. Modem G703 2-Wire, Standalone, G.703 (Balanced) Interface, Ethernet (UTP) Port for Management, Supports both 230V & 48V DC Power Interfaces

5. USB cable The modems supplied should also work on bandwidth between 64 Kbps to 2 Mbps.

6. Certifications Should have TEC Certification

Page 286 of 355


16. KVM Switches – Technical Specifications

16.1 High Performance KVM


Compliance (Y/N)



3. Operating Voltage

00 - 240 VAC

4. Device Support

PS/2 or USB keyboard and mouse, USB mass storage devices Virtual USB for non-isochronous human interface devices

5. Video Analog or Digital 1280x1024 @ 60Hz

6. Peripherals Stereo speakers 24 bit 44kHz and mono microphone

7. Number of Network Connections

1 / 2

8. Type of Network Connections

Ethernet, 10BaseT, 100BaseT, Gig E Connector

9. Serial Port 1

10. Serial Port Connector

RS232

11. Standards FCC Class B, EN 55022 Class B, EN 61000-3-2/-3-3, CISPR 22 Class B, EN 55024/CISPR 24, (EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000- 4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11), EN 60950/IEC 60950-Compliant, UL Listed (USA), CUL Listed (Canada), TUV Certified (Germany), CE Marking (Europe)

Page 287 of 355


16.2 Desktop KVM


Compliance (Y/N)



3. Operating Voltage

5V

4. Device Support

PS2 or USB

5. Video (VGA, SVGA, XGA, QVGA, SXGA, UXGA, QXGA) Maximum resolution of 2048 X 1536

6. Peripherals USB 2.0 Keyboard and Mouse (MM2 only), PS/2 Keyboard, PS/2 Mouse, IntelliMouse (PS/2 only), IBM Scroll Point, Logitech 2 Button, Logitech Trackball Scroller, Microsoft Trackball Scroller, Microsoft Scroller, Microsoft Intelleye Five Button

7. Standards FCC Class B, UL C-UL, CE, VCCI Class A

Page 288 of 355


17. Load Balancer – Technical Specifications

17.1 Load Balancer I


Compliance (Y/N)



3. Throughput Up to 4 GB

4. Ports 6 Nos 10/100/1000 BaseT Ports, 2xGigabit Fiber Ports (SFP-GBIC Mini) – Optional and Full-duplex Gigabit Ethernet fiber

5. Supported Protocols

OSPF, RIP I, RIP 2

6. Operating Temperature

Operating temperature: 0ºC to 40ºC (32ºF to 104ºF)

Humidity: 5% to 95% non-condensing

7. Power Requirement

100-240V AC, 50Hz

8. Memory Up to 4GB

9. Console RJ45 Serial Connection

10. Certification Safety: EN, CSA, CB, cTUVus, cULus, IEC #60950-1

EMC: CE, FCC, ICES-003, VCCI, CCC, C-Tick, EN 55022, EN 55024, FCC Part 15B Class A

RoHS 6

Page 289 of 355


17.2 Load Balancer II


Compliance (Y/N)



3. Throughput Up to 4 Gbps

4. Connectors VGA PS/2 keyboard/mouse Ethernet (see chart below)

Serial port (DB-9)

5. Ethernet 12xGigabit

6. Supported Protocols

HTTP HTTPS (SSL) SSH SMTP IMAP POP3 RDP (Windows Terminal

Services) SIP NNTP ASP Streaming media DNS LDAP RADIUS TFTP Other TCP/UDP services

7. Load Balancing

Layer 4 & Layer 7 load balancing Content routing IPv6 ready Persistence methods Client IP Time Cookie HTTP header HTTP parameter SIP Call ID Route-Path & Bridge-Path

support Direct Server Return mode Server health monitoring

8. Management & Usability

Easy Web-based user interface Health monitoring Performance monitoring SNMP support

Page 290 of 355



Compliance (Y/N)

Automated updates ACL and SSL protected Real-time traffic statistics Automated configuration backups Auto-discovery mode Application Programming Interface (API) Point and click firmware updates Event notification VLAN

9. Security Built-in IPS and exploit protection Automated IPS definition updates Service level ACL Denial of Service Protection

10. Technical Support

24X7

11. Power Requirement

100-240V AC, 50Hz

12. Memory Up to 4GB

Page 291 of 355


18. Thin Client – Technical Specifications


Compliance (Y/N)



3. Processor Industry standard 1GHz or higher speed processor

4. Ports Built-in 10/100 Ethernet Interface with WOL support , One serial port ,2 USB ports, 1 parallel port, Audio Ports

5. Peripherals PS/2 mouse with Pad and 104 Keys PS/2 Keyboard

6. RAM 1 GB RAM upgradeable up to 2GB

7. ROM 1 GB Flash ROM

8. Monitor With 18.5” TFT LCD Flat Monitor with 5 ms or better response time & TCO’05 certified

9. Chassis Ultra Small form factor chassis mountable at rear side of monitor with vesa kit with suitable SMPS

10. OS Windows XP / Windows 7 Embedded in Flash ROM

11. Support JVM support – for IE 9.0 or latest versionShould support VT100/VT220/ANSI emulationsFull PPP/ Multisession / Multi host support under windows environmentMultilingual support & Thin client Management s/wMicrosoft Windows 2003 or latest Server TSE, Unix and Linux Server (Using Emulation Suite)

Software Specifications for Windows or other OS Thin clients

Support for SSH, telnet, XDM protocols and VNC. Should have applications such as Web Mail client, Browser, PDF reader etc. Should support plug and play USB Drives Multilingual support. Unicode complaint (Indian Language support – English, Hindi & Local Language)

with three key board layouts. Remote administration such as Telnet, FTP, NFS, SSH Client with secure copy, etc. Automatic hardware detection GUI tools for configuring devices such as printers, scanners, Network cards etc. Thin Client should have Gnome/KDE Window manager Thin Client should have support for NIS, LDAP authentication

Page 292 of 355


19. Intrusion Prevention System (IPS) – Technical Specifications

19.1 Entry Level IPS


Compliance (Y/N)



3. Maximum Throughput Media Rich

250-400 Mbps

4. Maximum Throughput Transactional

150-250 Mbps

5. Threat Protection

25000+ treat

6. Zero Day Protection with Anomaly Detection

Yes

7 Availability Active/ Active and Active/Standby

8. Redundant Power Supply

No

9. Max Firewall Throughput

1000 – 1500 Mbps

10. Max Firewall Correction

100000 - 250000

11. Ports 6 Gigabit Ports

12. Management and Monitoring Interface

1 Ethernet port

13. Memory 4GB

14. Minimum Flash

4GB

Page 293 of 355


19.2 High Level IPS


Compliance (Y/N)



3. Maximum Throughput Media Rich

10,000 Mbps

4. Maximum Throughput Transactional

5000 Mbps

5. Threat Protection

25000+

6. Zero Day Protection with Anomaly Detection

Yes

7. Availability Active/ Active and Active/ Standby

8. Redundant Power Supply

Yes

9. Max Firewall Throughput

40,000 Mbps

10. Max Firewall Correction

80,00,000

11. Ports 12 Gigabit Ethernet and 8 Nos 10 Gigabit Ethernet Ports

12. Management and Monitoring Interface

1 Ethernet Port

13. Memory 48GB

14. Minimum Flash

2GB

Page 294 of 355


20. Server – Technical Specifications

20.1 Low End Server


Compliance (Y/N)

1. Make To be specified2. Model To be specified3. Form Factor Half/ Full Height Blade Modules

with Dual Redundant I/O and Power Connectors

4. Processor Intel Xeon E5 2600 series, 2.4 GHz or Higher

5. Chipset Intel C6006. RAM / Main

Memory64GB Registered ECC PC3-10600 LP DDR3 RAM and Expandable up to min. 128 GB

7. RAID Controller Compatible RAID controller for SAS and RAID 0, 1

8. Hard Disk capacity & type

2 x 300 GB in RAID-0/1 using 2.5” Slim, Front accessible, Hot Plug/ Hot Swappable SAS and with the flexibility to boot from SAN

9. I/O Dual-port Gigabit Ethernet (1Gbps) with TCP/IP Offload Engine and automatic failover support

Dual-port 8Gbps FC HBA for SAN Connectivity with Two Fiber Patch Chords

10. Graphics Integrated/ Embedded Graphics Port

11. Management and Failure Alert Mechanism

Integrated Systems Management Processor (SMP)/ Management Module

The Blade Server should be able to alert impending failures on important components like Processor, Memory, HDD and Expansion Cards.

12. Certification Should be certified on the supplied OS Version


OEM Supported 64bit RHEL/ MS-Windows Server 2008 R2 Ent. Edition Server Operating System Licenses with required CALs (as applicable) and Cluster Suite with OEM Support (Phone and Web support), media, security updates, patches and errata for a period

Page 295 of 355



Compliance (Y/N)

of 1 Year.

20.2 High End Server


Compliance (Y/N)

1. Make To be specified2. Model To be specified3. Form Factor Full Height Blade Modules with

Dual Redundant I/O and Power Connectors

4. Processor Intel Xeon E7-4800, 8 Core , 2.4 Ghz , 24 MB 1066 MHz or better

5. Chipset Intel ® 75006. RAM / Main

Memory128 GB Expandable up to min. 512GB

7. RAID Controller Compatible RAID controller for SAS and RAID 0, 1

8. Hard Disk capacity & type

2 x 300 GB in RAID-0/1 using 2.5” Slim, Front accessible, Hot Plug/ Hot Swappable SAS and with the flexibility to boot from SAN

9. I/O Dual-port Gigabit Ethernet (1Gbps) with TCP/IP Offload Engine and automatic failover support

Dual-port 8Gbps FC HBA for SAN Connectivity with Two Fiber Patch Chords

10. Graphics Integrated/ Embedded Graphics Port

11. Management and Failure Alert Mechanism

Integrated Systems Management Processor (SMP)/ Management Module

The Blade Server should be able to alert impending failures on important components like Processor, Memory, HDD and Expansion Cards.

12. Certification Should be certified on the supplied OS Version


OEM Supported 64bit RHEL/ MS-Windows Server 2008 R2 Ent. Edition Server Operating System Licenses with required CALs (as applicable) and Cluster Suite with OEM Support (Phone and Web support), media, security updates,

Page 296 of 355



Compliance (Y/N)

patches and errata for a period of 1 Year.

Page 297 of 355


20.3 Database server


Compliance (Y/N)



3. Processor 64 bit processors with 2.6 GHz or above with a minimum of 4 processor or higher

Processor should be latest series/generation for the server model and Support should be available for a minimum period of 5 years

4. TPCC Minimum TPMC Rating of 4,00,000 with configuration offered

5. Operating System

Support for 64bit Linux / UNIX / Windows Operating System as applicable, with cluster support

6. Memory Minimum 16 GB ECC or equivalent RAM of highest frequency as applicable in the quoted model to be offered per processor.

Memory should support RAID and memory mirroring.

7. Storage The Volume Manager and File System on the server should support heterogeneous storage models from different OEMs

8. Slots All cards should be on 64 bit PCI-X/PCI-e slots.

25% of total slots should be free for future expansion. Alternatively, vendors should not consume more than 75% of available slots in the server.

SAN HBAs should be connected on separate slots for high throughput requirements

9. Power Minimum Dual Redundant Power Supply Hot Pluggable

10. Management Local System Management and Control-It must enable

Page 298 of 355



Compliance (Y/N)

complete access, monitoring and control from console. Required hardware and software must be supplied.

It should have seamless failover without manual intervention; Management of the OS and the partitions (if required) in the Servers; A console with color monitor, keyboard and Mouse

Should be provided with a GUI based management console to take care of the partition management & configuration;

11. Others

Cache: Total Cache to be min 8 MB per processor socket Min 2 x 146 GB (or higher) SAS / FC hot plug drives for operating system (10 K / 15 K rpm)

for each partition in RAID 0,1 combinations with provision of mirroring OS and provision of maintaining data for certain specific applications

4 Ethernet Ports of minimum 10/100/1000 Mbps. 4 Nos USB 2.0 compliant ports Fiber Channel Adapters 2 x minimum 4GBps 1 DVD (preferably RW-DL) Drive The Server chassis should be fitted with HS fan modules fully loaded Logical or Physical Partitioning should be supported Server should support virtualization Capable of dynamic movement of resources (CPU/ memory/ adapters) across partitions The server should be capable of generating pre-failure alerts for CPU, memory, hard-disks,

HS Fans etc and the OEM should provide warranty replacement based on PFA The Server quoted must conform to all relevant international standards like FCC, UL etc Necessary software and scripts for automatic cluster failover and load balancing within

cluster to be supplied for cluster based solutions Form Factor: 19” rack mountable with rack mounting accessories The system software must provide perpetual & full use licenses For Database cluster, the clustering software should support heterogeneous Operating

systems from different OEMs

Page 299 of 355


20.4 Xeon Server


Compliance (Y/N)



3. Processor 64 bit processors with 2.6 GHz or above with a minimum of 2 processor or higher

Processor should be Xeon® with latest series/generation for the server model and Support should be available for a minimum period of 5 years

4. TPCC Minimum TPMC Rating of 2,00,000 with configuration offered

5. Operating System Support for 64bit Linux / UNIX / Windows Operating System as applicable, with cluster support

6. Memory Minimum 16 GB ECC or equivalent RAM of highest frequency as applicable in the quoted model to be offered per processor.

Memory should support RAID and memory mirroring

7. Storage (Choose any one) The Volume Manager and File System on the server should support heterogeneous storage models from different OEMs

8. Slots SAN HBAs should be connected on separate slots for

Page 300 of 355



Compliance (Y/N)

high throughput requirements

All cards should be on 64 bit PCI-X/PCI-e slots

25% of total slots should be free for future expansion. Alternatively, vendors should not consume more than 75% of available slots in the server

9. Power Minimum Dual Redundant Power Supply Hot Pluggable

10. Management Should be provided with a GUI based management console to take care of the partition management & configuration

It should have seamless failover without manual intervention; Management of the OS and the partitions (if required) in the Servers; A console with color monitor, keyboard and Mouse

Local System Management and Control- It must enable complete access, monitoring and control from console. Required hardware and software must be supplied.

11. Others

Cache: Total Cache to be min 8 MB per processor socket Min 4 x 146 GB (or higher) SAS hot plug drives for operating system (10 K / 15 K rpm) for

Page 301 of 355



Compliance (Y/N)

each partition in RAID 0,1,5 combinations 4 Ethernet Ports of minimum 10/100/1000 Mbps. 4 Nos USB 2.0 compliant ports Fiber Channel Adapters 2 x minimum 4GBps 1 DVD (preferably RW-DL) Drive The Server chassis should be fitted with HS fan modules fully loaded Logical or Physical Partitioning should be supported Server should support virtualization. Capable of dynamic movement of resources (CPU/ memory/ adapters) across partitions The server should be capable of generating pre-failure alerts for CPU, memory, hard-disks,

HS Fans etc and the OEM should provide warranty replacement based on PFA The server quoted must conform to all relevant international standards like FCC, UL etc. Necessary software and scripts for automatic cluster failover and load balancing within

cluster to be supplied for cluster based solutions Form Factor: 19” rack mountable with rack mounting accessories The system software must provide perpetual & full use licenses For Database cluster, the clustering software should support heterogeneous Operating

systems from different OEMs

Page 302 of 355


20.5 EPIC Based Server


Compliance (Y/N)



3. Processor Configuration Epic Based multi processing server supporting up to two high performance 64 bit Itanium processors

4. Processor Details Quad core processor with 1.6 GHz or above

5. Memory Minimum 16 GB ECC or equivalent RAM of highest frequency as applicable in the quoted model to be offered per processor. Memory should support RAID and memory mirroring.

6. Server Form Factors and Rack Configuration

2U server

7. Others

Min 4 x 146 GB (or higher) SAS hot plug drives for operating system (10 K / 15 K rpm) for each partition in RAID 0,1,5 combinations

4 Ethernet Ports of minimum 10/100/1000 Mbps. 4 Nos USB 2.0 compliant ports Fiber Channel Adapters 2 x minimum 4GBps SAN HBAs should be connected on separate slots for high throughput requirements All cards should be on 64 bit PCI-X/PCI-e slots 25% of total slots should be free for future expansion. Alternatively, vendors should not

consume more than 75% of available slots in the server 1 DVD (preferably RW-DL) Drive Minimum Dual Redundant Power Supply Hot Pluggable The Server chassis should be fitted with HS fan modules fully loaded Logical or Physical Partitioning should be supported Server should support virtualization Capable of dynamic movement of resources (CPU/ memory/ adapters) across partitions Should be provided with a GUI based management console to take care of the partition

management & configuration The server should be capable of generating pre-failure alerts for CPU, memory, hard-disks,

HS Fans etc and the OEM should provide warranty replacement based on PFA The Server quoted must conform to all relevant international standards like FCC, UL etc Necessary software and scripts for automatic cluster failover and load balancing within

cluster to be supplied for cluster based solutions It should have seamless failover without manual intervention; Management of the OS

and the partitions (if required) in the Servers; A console with color monitor, keyboard and Mouse

System Management: Local System Management and Control. It must enable complete

Page 303 of 355



Compliance (Y/N)

access, monitoring and control from console. Required hardware and software must be supplied.

Form Factor: 19” rack mountable with rack mounting accessories The Volume Manager and File System on the server should support heterogeneous

storage models from different OEMs The system software must provide perpetual & full use licenses For Database cluster, the clustering software should support heterogeneous Operating

systems from different OEMs Any other specification

Page 304 of 355


20.6 Rack Server


Compliance (Y/N)

1. Chassis 1U / 2U Rack Server with Rack Conversion Kit from OEM of Server make

2. Processor Intel Xeon E3-1240 V2 (3.4 GHz, 4 Cores, 8 Threads, 8 MB Cache)

3. Chipset Intel C 202 / 204 chipset

4. Memory Minimum: 2 x 4 GB PC3-10600E unbuffered DDR3 ECC 1333 MHz expandable to 16 GB

5. Graphics Embedded/integrated graphics supporting min resolution of 1024X768

6. Network Gigabit Ethernet Port

Dedicated Management Port through a dedicated management controller

7. Storage Minimum 4 numbers of Hot Swap drives. Support upto 8TB LFF Drives

Internal DVD RW Drive

8. Management Dedicated Remote Management controller

Complete Remote Management capability for management of server

9. Industry Standard compliance

Supports industry standard compliance including ACPI 3.0, PCI Express 2, WOL Support, PXE support, IPM 2.0, DCMI 1.0, USB 2, Microsoft Logo Certification, RHEL Logo Certification, SLES Logo Certification.

10. Expansion slots

4 PCIe G2 Expansion slots. ( 1 * X4, 2 * x8 and 1 * x16 Slots )

11. Ports 1 Serial, minimum 8 USB, 1 VGA, UUID Button

12. Keyboard & Mouse

USB Keyboard and Mouse

13. Power Supply 460 W Redundant Power Supply. Power supply should support 92%

Page 305 of 355



Compliance (Y/N)

Efficiency


Support for ACPI, PCI 2.3, PXE support, Wake-on-LAN

15. Form Factor Base Tower model, with the option to be rack converted

16. Operating System Support

Microsoft windows, Red hat Linux, SUSE

17. Warranty 3 year warranty.

18. Remote Management Features

Remote Console to collaborate with up to six server administrators at a time.

Should support scripting language for mass deployment via online configuration utility

Should support Event Log independent of the host operating system. Should able to generate events like server power on/off, reset, changes in user configuration, clear event log, successful and unsuccessful login attempts with the users access machine name to help audits for security or troubleshooting purposes. The Event Log should easily accessible through the browser, command line, script or management software

The Systems Management software should provide Role-based security

Should support scheduled execution of OS commands, batch files, scripts, and command line apps on remote nodes

Should help to proactively identify out-of-date BIOS, drivers, and Server Management agents and enable the remote update of system software/firmware components.

The Server Management Software should be of the same brand as of

Page 306 of 355



Compliance (Y/N)

the server supplier.

19. Server Management Software

System remote management software should support browser based Graphical Remote Console; Virtual Power button, Remote boot using USB / CD/ DVD Drive and should be capable to offer upgrade of software and patches from a remote client using Media / image/folder; server power capping and historical reporting; should have support for multifactor authentication. Remote console sharing during pre-OS and OS runtime operation, Console replay - Console Replay captures and stores for replay the console video during a server's last major fault or boot sequence. Microsoft Terminal Services Integration, 128 bit SSL encryption and Secure Shell Version 2 support Should provide support for AES and 3DES on browser should provide remote firmware update functionality should provide support for Java free graphical remote console.

Page 307 of 355


20.7 Tower Server Entry Level


Compliance (Y/N)

1. Processor Intel Xeon E3-1240 V2 (3.4 GHz, 4 Cores, 8 Threads, 8 MB Cache)

2. Chipset Intel C202/ 204 chipset

3. Memory Minimum: 2 x 4 GB PC3-10600E unbuffered DDR3 ECC 1333 MHz expandable to 16 GB

4. Graphics Embedded/integrated graphics supporting min resolution of 1024X768

5. Network Gigabit Ethernet Port

Dedicated Management Port through a dedicated management controller

6. Storage Onboard SATA controller capable of supporting RAID 0/1/10 configuration with Hot Spare

Minimum 2 x 300 GB SAS 15K Hard Dsk Drive

Minimum 4 numbers of Hot Swap drives. Support upto 8TB LFF Drives

Internal DVD RW Drive

7. Management Dedicated Remote Management controller

Complete Remote Management capability for management of server


Supports industry standard compliance including ACPI 3.0, PCI Express 2, WOL Support, PXE support, IPM 2.0, DCMI 1.0, USB 2, Microsoft Logo Certification, RHEL Logo Certification, SLES Logo Certification.

9. Expansion slots

4 PCIe G2 Expansion slots. ( 1 * X4, 2 * x8 and 1 * x16 Slots )

10. Ports 1 Serial, minimum 8 USB, 1 VGA, UUID Button

11. Keyboard & USB Keyboard and Mouse

Page 308 of 355



Compliance (Y/N)

Mouse

12. Power Supply 460 W Redundant Power Supply. Power supply should support 92% Efficiency


Support for ACPI, PCI 2.3, PXE support, Wake-on-LAN

14. Form Factor Base Tower model, with the option to be rack converted

15. Operating System Support

Microsoft windows, Red hat Linux, SUSE

16. Warranty 3 year warranty.

17. Remote Management Features

Remote Console to collaborate with up to six server administrators at a time.

Should support scripting language for mass deployment via online configuration utility

Should be web based and should support CLI

Should support Event Log independent of the host operating system. Should able to generate events like server power on/off, reset, changes in user configuration, clear event log, successful and unsuccessful login attempts with the users access machine name to help audits for security or troubleshooting purposes. The Event Log should easily accessible through the browser, command line, script or management software

The Systems Management software should provide Role-based security

Should support scheduled execution of OS commands, batch files, scripts, and command line apps on remote nodes

Page 309 of 355



Compliance (Y/N)

Should help to proactively identify out-of-date BIOS, drivers, and Server Management agents and enable the remote update of system software/firmware components.

The Server Management Software should be of the same brand as of the server supplier.

18. Server Management Software

System remote management software should support browser based Graphical Remote Console; Virtual Power button, Remote boot using USB / CD/ DVD Drive and should be capable to offer upgrade of software and patches from a remote client using Media / image/folder;server power capping and historical reporting;should have support for multifactor authentication. Remote console sharing during pre-OS and OS runtime operation, Console replay - Console Replay captures and stores for replay the console video during a server's last major fault or boot sequence. Microsoft Terminal Services Integration, 128 bit SSL encryption and Secure Shell Version 2 support.Should provide support for AES and 3DES on browser.Should provide remote firmware update functionality.Should provide support for Java free graphical remote console.

Page 310 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________20.8 Socket Blade Server


Compliance (Y/N)

1. CPU / Sockets 2 x Intel Xeon E5-2609 (2.4 GHz, 4 Cores, 4 Threads, 10 MB Cache)

2. Form Factor Blade3. Main Memory Minimum: 32GB (4 x 8GB) C24.

Spare Memory slots must be available for scaling the memories to 512GB RAM without replacing the supplied Memory modules.

4. Memory RAS Advanced ECC Registered DIMMS or Equivalent Technology

5. Ethernet /CNA (Converged Network Adapter) Ports

2 x 10 Gigabit Ethernet ports on-board supporting TCP/IP Offload Engine (TOE), hardware-based accelerated iSCSI, iSCSI boot, and autosensing 10Gb/1Gb Ethernet or via a full bandwidth PCI-e/PCI-X card. One additional 10/100 NIC dedicated for remote management.

6. FC Ports for SAN Connectivity

Dual port Fiber Channel HBA internal to the Server Blade.

7. I/O Slots 2 x PCI-e x16 slots in each server and at least one free slot for future use.

8. Internal Disk 2 x 600GB, SAS hot-plug HDD with minimum 10K/15K rpm, SAS Hot pluggable hard drives.

9. Hard disk Controller

Internal HDD Controller should be offered for above quoted hard disk with RAID (1/ (1+0)) feature

10. Management Console

1. Dedicated 10/100 ethernet port for out of band management via Web based remote interface and remote console or via Blade Chassis.2. Service processor including management software should be provide with system to manage system via console or web-management having dedicated management Ethernet.3. The software should provide Role-based (admin, user, operator, etc) security which allows effective delegation of management responsibilities by giving systems administrator’s granular control.4. Should help to identify out-of-date BIOS, drivers, and Server Management agents and enable the remote update of system

Page 311 of 355



Compliance (Y/N)

software/firmware components.5. Should provision for a single console to monitor multiple blade enclosures.6. Should support simultaneous remote access for different servers in the enclosure.

11. Monitor Minimum: 17'' Rack Monitor (Same of Server Make) for Blade Server

12. Memory (ADDON)

8GB

Page 312 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________20.9 4-Sockets Blade Server


Compliance (Y/N)

1. CPU / Sockets 4 x Intel Xeon E7-4807 (1.86 GHz, 6 Cores, 12 Threads, 18 MB Cache) Processor.

2. Form Factor Blade3. Main Memory Minimum: 64 GB DDR3 Registered

Memory & Upgradeable to 2TB of Memory

4. Memory RAS Advanced ECC Registered DIMMS or Equivalent Technology

5. Ethernet /CNA (Converged Network Adapter) Ports

2 x 10 Gigabit Ethernet ports on-board supporting TCP/IP Offload Engine (TOE), hardware-based accelerated iSCSI, iSCSI boot, and autosensing 10Gb/1Gb Ethernet or via a full bandwidth PCI-e/PCI-X card. One additional 10/100 NIC dedicated for remote management.

6. FC Ports for SAN Connectivity

Dual port Fiber Channel HBA internal to the Server Blade.

7. I/O Slots 2 x PCI-e x16 slots in each server and at least one free slot for future use.

8. Internal Disk 2 x 600GB, SAS hot-plug HDD with minimum 10K/15K rpm, SAS Hot pluggable hard drives.

9. Hard disk Controller

Internal HDD Controller should be offered for above quoted hard disk with RAID (1/ (1+0)) feature

10. Management Console

1. Dedicated 10/100 ethernet port for out of band management via Web based remote interface and remote console or via Blade Chassis.2. Service processor including management software should be provide with system to manage system via console or web-management having dedicated management Ethernet.3. The software should provide Role-based (admin, user, operator, etc) security which allows effective delegation of management responsibilities by giving systems administrator’s granular control.4. Should help to identify out-of-date BIOS, drivers, and Server Management agents and enable the remote update of system software/firmware components.

Page 313 of 355



Compliance (Y/N)

5. Should provision for a single console to monitor multiple blade enclosures.6. Should support simultaneous remote access for different servers in the enclosure.

11. Monitor Minimum: 17'' Rack Monitor (Same of Server Make) for Blade Server

Page 314 of 355


21. Biometric Device

21.1 Single Fingerprint capture



Compliance (Y/N)



3. Capturing Finger print only (1:1)

4. Authentication/Verification Time:

Less than 1.5 sec

5. False Rejection Ratio

Less than 0.001%

6. False Acceptance Ratio

Less than 0.0001%

7. Light Source Red/white/green

8. Template Standard and Raw Image

8 Bit Raw image; ISO 19794-2 for finger print minutiae template; ISO 19794-4 for fingerprint image template, (WSQ compression ifavailable may be indicated).

9. Gray Scale/Image Type

8 bit, 256 levels

10. Rotation Angle

No rotation angle permitted during image acquisition for enrollment/ identification/verification

11. Fingerprint Acquisition format

Enrolment / Verification Lossless (RAW,PNG or Lossless JPEG20002) image format (compression algorithm code numbers 0,1,4,5 of ISO 19794-4: 2005(E))

12. Sensor Resolution

Sensor resolution min of 500 DPI

13. Connectivity port

USB

14. Extractor & Image Template Standard

ISO 19794-2 for fingerprint minutiae template &ISO 19794-4 for Fingerprint Image Template

15. Certifications CE certified


Windows 2003 or higher

Page 315 of 355


Page 316 of 355


21.2 Dual Fingerprint capture



Compliance (Y/N)



3. Capturing Finger print only (1:1)

4. Authentication/Verification Time:

Less than 1.5 sec

5. False Rejection Ratio

Less than 0.001%

6. False Acceptance Ratio

Less than 0.0001%

7. Light Source Red/white/green

8. Template Standard and Raw Image

8 Bit Raw image; ISO 19794-2 for finger print minutiae template; ISO 19794-4 for fingerprint image template, (WSQ compression ifavailable may be indicated).

9. Gray Scale/Image Type

8 bit, 256 levels

10. Rotation Angle

No rotation angle permitted during image acquisition for enrollment/ identification/verification

11. Fingerprint Acquisition format

Enrolment / Verification Lossless (RAW,PNG or Lossless JPEG20002) image format (compression algorithm code numbers 0,1,4,5 of ISO 19794-4: 2005(E))




USB

14. Extractor & Image Template Standard

ISO 19794-2 for fingerprint minutiae template &ISO 19794-4 for Fingerprint Image Template

15. Certifications CE certified


Windows 2003 or higher

Page 317 of 355


21.3 Other Biometric Access Control


Compliance (Y/N)

1. Sensor Optical

2. Fingerprint Template

Min 500

3. No. of Record Min 50,000

4. Verification <= 1 Second

5. Identification <= 2 Seconds

6. FAR < = 0.0001%

1. FRR < = 1%

2. Mode of wakeup

1 touch

3. Time zone 50

4. Restriction Time Zone

50 time zone, 5 grouping, 10 combination

5. Communication RS232, RS485, TCP/IP, Wifi, GPRS, 3G

6. Output 26 bit Wiegand, 12V DC 3A

7. Display 1 x 2 inch LCD Display

8. Power 12V DC


0° C - 45° C

10. Operating Humidity

20 % - 80 %

Page 318 of 355


21.4 Biometric Attendance System



Compliance (Y/N)



3. Fingerprint Sensor Type

Optical, Sensor

4. Authentication Finger print only (1:N)

5. Authentication/ Verification Time

Less than 2 seconds for 1:N Mode for 500/3000/10000 users.

6. FAR (falls acceptance ratio)

Less than 0.001%

7. FRR (falls rejection ratio)

Less than 0.01%

8. Image Quality High Quality image (NFIQ<=2) in dry, wet and dirt conditions

9. User capacity 500/3000/10000 users respectively for small, medium and largeorganizations (2 fingerprint each)

10. Data Storage Capacity

Minimum 10000/30000/50000 transactions respectively forsmall, medium and large organizations



12. Sensor type 500 dpi min. Optical Sensor


LAN

14. Certifications FCC, CE, ROHS(for fingerprint sensor)

15. Keypad 12 keys minimum (with Function key or IN & OUT facility)

16. Reporting Should provide customized reporting

17. LCD min.16 x 2 characters LCD

Page 319 of 355


21.5 Hand Held Biometric DeviceS.

No. Features Specifications Specifications offered by the OEM / Vendor

Compliance (Y/N)

1. Micro Processor

32 bit ARM CPU or higher

2. CPU Speed 70 MHz

3. Program Memory

16 MB

4. Data Memory 32 MB

5. LCD 64x128 Pixel graphic display with Back- Light,

6. Battery Lithium-Ion 1700 to 2100 long life. Light weight suitable for 12 hours operation. Life: 300 cycles

7. Keyboard Minimum with 19 Keys Keyboard. / Touch Screen

8. Charger AC 180V to 280V charger for 3 to 4 hours charging.

9. Two Smart Card Slots

ISO 7816 compliant contact card & reader Should Support protocols like 3DES; Smart card should be SCOSTA compliant.

10. Communication GSM GPRS For Exchange of Data through TCP/IP with server. POS device should support wired and wireless broad band connectivity being provided by BSNL, Tata, Reliance. Airtel and other major operators operating in India

11. Printer Integrated Thermal Paper Printer (56 mm width, 10 lines/sec).

12. Cabinet Aesthetically designed


0 to 50 degree Celsius

14. Humidity 98% RH, None condensing.


Linux /Windows

16. Data Ports USB Host & Device & RS 232;

17. Protocol TCP/IP / HTTP /HTTPS

18. Carry Case Carry case to house the POS device

19. Finger Print Capture

The device should have capability of capturing finger print

20. Speaker To give audio response to the beneficiary.

21. Internal GPS Built in GPS

Page 320 of 355

RFP for Empanelment of Vendors for supply of IT Hardware & Software under the Rate Contract_____________________________________________________________________________________22. Smart Card Access Control


Compliance (Y/N)

1. Size 190(L) x 136 (W) x 36(H) mm

2. User Capacity 10,000

3. Transaction Storage

50,000

4. Card Reader Inbuilt EM RFID(Proximity) Card reader

5. Operating System

Windows, Linux

6. Communications RS232, RS485, TCP/IP, Wifi, GPRS, 3G

7. Identification Time

<= 1 S

8. LED Red, Green

9. LCD 128 x 64 Blue Background Light


0° C - 45° C

11. Operating Humidity

20 % - 80 %

12. Optional Card Reader, Simple Access Control, Backup supply, Printer, Modem

13. Power Supply 5V DC

Page 321 of 355


23. LCD TV full HD – Technical Specification

23.1 32” Full HD



Compliance (Y/N)



3. Size 32 inches

4. Resolution Full HD

5. Backlight CFL/LED

6. Brightness 400 NITS min

7. Contrast 1200:1 or better

8. Viewing Angle 175º or better

9. Motion Flow 100 Hz or above

10. Audio Minimum 20 watt RMS (2x10 watt) or better

11. Energy Saving

Available

12. Ports DTH/Cable ready

13. Accessories Table stand, wall mount kit & with standard main cables

14. Power Supply 220v to 240v AC, 50HZ

Page 322 of 355


23.2 40” Full HD



Compliance (Y/N)



3. Size 40 inches








11. Energy Saving

Available




Page 323 of 355


23.3 42” Full HD



Compliance (Y/N)



3. Size 42 inches








11. Energy Saving Available




Page 324 of 355


24. LED TV full HD – Technical Specification

24.1 32” Full HD



Compliance (Y/N)



3. Size 32 inches








11. Energy Saving

Available




Page 325 of 355


24.2 40” Full HD


Compliance (Y/N)



3. Size 40 inches












Page 326 of 355


24.3 42” Full HD


Compliance (Y/N)



3. Size 42 inches












Page 327 of 355


25. Passive Components – Technical Specification


Compliance (Y/N)

CAT 6A Solution1. UTP components (

CAT 6A )All specifications for components & cabling to be tested up to 500 Mhz , UL/ETL *R listed & verified , should be registered for follow up program , UL/ETL marking should be embossed/printed on the passive items & their packing

2. UTP cable 4 pair, should confirm or exceed the EIA/TIA 568 C.2-10 (CAT 6A) standards for physical & electrical specifications , UL/ETL *R listed & verified , Should be certified by independent test lab for 10G Gigabit Ethernet Performance up to 100 mrts. Cable channel performance upto 700 Mhz or more. 23 AWG solid bare copper.

3. 24 port Patch Panel

110 wiring block at rear end & RJ 45 jack on front panel, 19” rack mountable , should confirm or exceed the EIA/TIA 568 B.2-10 (CAT 6A) standards , Metallic high strength & 1U height , confirm EIA/TIA 568 C.2-10 (CAT 6A) wiring pattern , should have routing rings & ties and labeling strips for identification, UL/ETL *R listed & verified


110 wiring block at rear end & RJ 45 jack on front panel, 19” rack mountable , should confirm or exceed the EIA/TIA 568 B.2-10 (CAT 6A) standards , Metallic high strength & 2U height , confirm EIA/TIA 568 C.2-10 (CAT 6A) wiring pattern , should have routing rings & ties and labeling strips for identification, UL/ETL *R listed & verified

5. Wire Manager/Patch Chord Minder panel

19 “ rack mountable, Metallic high strength with metal jumper rings for routing cable assemblies, mounts to the front

Page 328 of 355



Compliance (Y/N)

of 19” rack & 1 U height6. Information outlets Surface mount box with RJ 45

socket & gang box , should confirm or exceed the EIA/TIA 568 C.2-10 (CAT 6A) standards , provision for dust cover, labeling icons & strips, anchors for stain relief cable entry, UL/ETL *R listed & verified,i) Single ( 1-port)ii) Dual (2-port)iii) Quad (4- port)

7. Patch Cord Should confirm or exceed the EIA/TIA 568 C.2-10 (CAT 6A) standards , Factory molded boots on RJ 45 plugs at both ends, UL/ETL *R listed & verified.

7.1 Length - 1mrts

7.2 Length – 2mrts



UTP COMPONENTS (CAT6 )

1. UTP COMPONENTS (CAT6 )

All specifications for components & cabling to be tested up to 250 Mhz , UL /ETL*R listed & verified , should be registered for follow up program , UL/ETL marking should be embossed/printed on the passive items & their packing

2. UTP cable 4 pair, should confirm or exceed the EIA/TIA 568 C.2-1 (CAT 6) standards for physical & electrical specifications , Zero Bit Error verified by ETL. UL/ETL listed & verified , Should be certified by independent test lab for 1G Gigabit Ethernet Performance up to 100 mrts. Cable channel performance upto 600 Mhz. 23 AWG solid bare copper

3. UTP cable LSZH 4 pair, should confirm or exceed the EIA/TIA 568 C.2-1 (CAT 6) standards for physical

Page 329 of 355



Compliance (Y/N)

& electrical specifications , UL/ETL listed & verified , Should be certified by independent test lab for 1G Gigabit Ethernet Performance up to 100 mrts. 23 AWG solid bare copper. Cable channel performance upto 600 Mhz.


110 wiring block at rear end & RJ 45 jack on front panel, 19” rack mountable , should confirm or exceed the EIA/TIA 568 B standards for CAT 6, Metallic high strength & 1U height , confirm EIA/TIA 568 C.2-1 wiring pattern , should have routing rings & ties and labeling strips for identification, UL /ETL*R listed & verified


RJ 45 jack on front panel, 19” rack mountable , should confirm or exceed the EIA/TIA 568 B standards for CAT 6, 0.5 U height , confirm EIA/TIA 568 C.2-1 wiring pattern , should have routing rings & ties and labeling strips for identification, UL /ETL listed & verified


110 wiring block at rear end & RJ 45 jack on front panel, 19” rack mountable , should confirm or exceed the EIA/TIA 568 B standards for CAT 6, Metallic high strength, confirm EIA/TIA 568 C.2-1 wiring pattern , should have routing rings & ties and labeling strips for identification, UL /ETL*R listed & verified

7. UTP Patch Panel with Dynamic Labeling

The patch panel shall comply with EIA/TIA 568B Category 6 and ISO/IEC 11801 Class E Standard. The patch panel shall accommodate at least 24 ports with dynamic labeling in LED to indicate port ID numbers up to five digits. The LED luminous intensity shall be able to adjust in at least 5 levels. The patch panel shall support the remote patching technology where network administrative activities such as move, add, change can

Page 330 of 355



Compliance (Y/N)

be done efficiently. The network event logs shall be able to be recorded. The patch panel shall consist of functional icon dedicated for each port; functional icons can be shown in at least 6 colors for easy channel identification. The patch panel shall consist of patch cords contact switch mechanisms with dry contacts to provide a signal via software for any patch cord disconnection. The patch panel shall be controlled and power supplied by a LAN controller. The LAN controller shall be able to support up to 10 pieces of patch panels. The patch panel shall consist of modular jacks with flush-faced, zero footprint shutter mechanism, and lead frame technology.

8. LAN Controller The controller shall have a dynamic LED display to indicate power status. The controller shall have a dynamic LED display to indicate all connected patch panel connectivity status. The controller shall support up to 10 patch panel with dynamic labelling feature, and supply required power to them. The controller shall compatible with standard 19” cabinet or rack. LAN Controller Software....1) user-interface for login, 2) data input, 3) adjust automatic sleep-mode function for LED on patch panels, 4) real-time event logs on panels, The software shall be used together with LAN Controller. The software shall be run and operated in a separate computer which is in the same network segment to those LAN Controllers to administrate and monitor.

9. Information outlets Surface mount box with RJ 45 socket & gang box , should confirm or exceed the EIA/TIA 568 C.2-1 standards for CAT 6, provision for dust cover,

Page 331 of 355



Compliance (Y/N)

labeling icons & strips, anchors for stain relief cable entry, UL/ETL *R listed & verified

9.1 iv) Single ( 1-port)

9.2 v) Dual (2-port)

9.3 vi) Quad (4- port)

10. Patch Cord Should confirm or exceed the EIA/TIA 568 C.2-1 standards for CAT 6, Factory molded boots on RJ 45 plugs at both ends, UL/ETL *R listed & verified , Option for colour – Grey, Blue, Red & Green

10.1 Length – 1Mrts




11. Patch Cord with LSZH

Should confirm or exceed the EIA/TIA 568 C.2-1 standards for CAT 6, Factory molded boots on RJ 45 plugs at both ends. It should have LSZH Jacket. Option for colour – Grey, Blue, Red & Green





12. Locakble Patch Cord

Should confirm or exceed the EIA/TIA 568 C.2-1 standards for CAT 6, Factory molded boots on RJ 45 plugs at both ends with one end should be lockable through the key type provision to secure the connection, Option for colour – Grey, Blue, Red & Green




Page 332 of 355



Compliance (Y/N)


13. Table Top Patch Hubs

Networking switches in providing 4-port access, Designed for multiple portable computer users to access network or high-speed internet , Contains 4 retractable high quality network cables , LED indicators for LAN connection and power supply , Comply to IEEE802.3 standard

STP ( Shielded Twisted Pair) COMPONENTS CAT 6

1. STP/FTP cable CAT 6

4 pair, STP/FTP ,should confirm or exceed the EIA/TIA 568 C.2-1 (CAT 6) standards for physical & electrical specifications. It should have LSZH Jacket with STP/FTP. Should be certified by independent test lab for 1G Gigabit Ethernet Performance up to 100 mrts. 23 AWG solid bare copper

2. 24 port STP CAT 6 Patch Panel

110 wiring block at rear end & RJ 45 jack on front panel, 19” rack mountable , should confirm or exceed the EIA/TIA 568 B standards for STP CAT 6, Metallic high strength & 1U/2U height , confirm EIA/TIA 568 C.2-1 wiring pattern , should have routing rings & ties and labeling strips for identification, UL /ETL*R listed & verified

3. 24 port STP CAT 6 Patch Panel

RJ 45 jack on front panel, 19” rack mountable , should confirm or exceed the EIA/TIA 568 B standards for STP CAT 6, 0.5U height , confirm EIA/TIA 568 C.2-1 wiring pattern , should have routing rings & ties and labeling strips for identification, UL /ETL*R listed & verified

4. Information outlets (STP CAT 6)

Surface mount box with RJ 45 socket & gang box , should confirm or exceed the EIA/TIA 568 C.2-1 standards for STP CAT 6, provision for dust cover, labeling icons & strips, anchors for stain relief cable entry,

Page 333 of 355



Compliance (Y/N)

UL/ETL *R listed & verified.4.1 i) Single ( 1-port)

4.2 ii) Dual (2-port)

4.3 iii) Quad (4- port)

5. Patch Cord STP CAT 6

Should confirm or exceed the EIA/TIA 568 C.2-1 standards for CAT 6, Factory molded boots on RJ 45 plugs at both ends, UL/ETL *R listed & verified.





6. Patch Cord STP CAT 6 with LSZH

Should confirm or exceed the EIA/TIA 568 C.2-1 standards for CAT 6. Jacket should be LSZH. Factory molded boots on RJ 45 plugs at both ends.





COMPONENTS CAT 5e

1. UTP COMPONENTS (CAT5e )

All specifications for components & cabling to be tested up to 100 Mhz. It should use for Voice Application.

2. UTP cable 4 pair, should confirm or exceed the EIA/TIA 568 C (CAT 5e) standards for physical & electrical specifications. It should have LSZH Jacket. 24 AWG Solid bare. It should supports applications such as 155Mb/s ATM, 622Mb/s ATM and IEEE 802.3 1000 Base-T (Gigabit Ethernet) standards, using parallel transmission technology. UL/ETL Listed & Verify.

Page 334 of 355



Compliance (Y/N)


110 wiring block at rear end & RJ 45 jack on front panel, 19” rack mountable , should confirm or exceed the EIA/TIA 568 B standards for CAT 5e, 1U height , confirm EIA/TIA 568 C.2 wiring pattern , should have routing rings & ties and labeling strips for identification, UL /ETL*R listed & verified

4. Information outlets Surface mount box with RJ 45 socket & gang box , should confirm or exceed the EIA/TIA 568 C.2 standards for CAT 5e, provision for dust cover, labeling icons & strips, anchors for stain relief cable entry, UL/ETL *R listed & verified

4.1 iv) Single ( 1-port)

4.2 v) Dual (2-port)

4.3 vi) Quad (4- port)

Patch Cord with LSZH

Should confirm or exceed the EIA/TIA 568 C.2 standards for CAT 5e, Factory molded boots on RJ 45 plugs at both ends. It should have LSZH Jacket. Option for colour – Grey, Blue, Red & GreenLength – 1Mrts

Length – 2mrts

Length – 3mrts

Length – 5mrts

FIBER COMPONENTS

1. Fiber Optic indoor Distribution cable , tight buffered, Multi mode (MM), support 10 G Ethernet up to 300 m,OM-3

Multimode optical fiber cable , 50/125 micron graded index, ,required for indoor applications, Fiber should be OFNR rated tight buffered tubes , Aramid yarn for strength, with FRP strength member , support 10 G Ethernet up to 300 m. Fiber Core should comply to ITU-T G.657 Standard. It should confirm or exceed the EIA/TIA

Page 335 of 355



Compliance (Y/N)

455 , EIA/TIA 568 , ISO 11801 standards for Fiber and cable performance specifications. UL/ETL *R Listed & verified Required in following configuration

1.1 4 fibers

1.2 6 fibers

2. Fiber Optic Indoor / outdoor loose tube cable, Unarmoured, Multi mode (MM), support 10 G Ethernet up to 550 m,OM-4

Multimode optical fiber cable , 50/125 micron graded index, , required for indoor /outdoor applications, loose tube jelly field, with all dielectric construction ,Water blocked buffer tube , strengthening members , outer sheath resistant to UV , chemicals ,moisture , sunlight , suitable for harsh environment. Fiber Core should comply to ITU-T G.657 Standard. support 10 G Ethernet up to 550 m, should confirm or exceed the EIA/TIA 455 , EIA/TIA 568 , ISO 11801 & ICEA -640 standards for Fiber and cable performance specifications. Required in following configuration

2.1 6 fibers

2.2 12 fibers

2.3 24 fibers

3. Fiber Optic outdoor armoured cable (OM 4),multi loose tube, Multi mode (MM) ,850nm laser optimized 50/125 micron, support 10 G Ethernet up to 550 m

Multimode optical fiber cable , 850nm laser optimized 50/125 micron graded index, support IEEE 802.3ae 10 gigabit Ethernet standard 550m distance. Fiber Core should comply to ITU-T G.657 Standard. It support 10 Gb/s laser based application as well as LED based application ,anti rodent , required for outdoor applications for direct burial, fiber should be protected inside jelly filled loose tubes , armoring with acrylic coated good quality steel tape , with FRP strength member, water

Page 336 of 355



Compliance (Y/N)

proof tape, double layer of HDPE jacket , should confirm or exceed the EIA/TIA 455 , EIA/TIA 568-B.3 , ISO 11801 & ICEA -640 standards for Fiber and cable performance specifications. Required in following configuration

3.1 6 fibers

3.2 12 fibers

3.3 24 fibers

4. Fiber Optic outdoor armoured cable , multi loose tube Single mode (SM)

Single mode optical fiber cable , 9.2/125 micron graded index, anti rodent , required for outdoor applications for direct burial, It should have multiple Tube with Multiple Fiber. Fiber Cable should be qualify to OS2 Standard. Fiber should be protected inside jelly filled loose tubes , armoring with acrylic coated good quality steel tape , with FRP strength member, water proof tape, double layer of HDPE jacket , should confirm or exceed the EIA/TIA 455 , EIA/TIA 568 , ISO 11801 & ICEA -640 standards for Fiber and cable performance specifications. Required in following configuration

4.1 6 fibers

4.2 12 fibers

4.3 24 fibers

5. Optical Fiber connectors

SC type, Epoxyless, Field mountable with required accessories & consumables , UL/ETL *R Listed & verified required for terminating

6. SC type 50/125 micron MM fiber

9.2/125 micron SM fiber

7. LC type LC type, Epoxyless, Field mountable with required accessories & consumables , UL/ETL *R Listed & verified required for terminating

Page 337 of 355



Compliance (Y/N)

50/125 micron MM fiber

9.2/125 micron SM fiber

8. Optical Fiber pigtails SC type, 1 meter length

Pigtails SC type , compatible with fusion or mechanical splices , Field mountable with required accessories & consumables , U/ETL L *R Listed & verified required for terminating

8.1 (i) 50/125 micron MM fiber OM3

8.2 (ii) 50/125 micron MM fiber OM4

8.3 (iii) 9.2/125 micron SM fiber

9. Optical Fiber pigtails LC type , 1 meter

Pigtails LC type , compatible with fusion or mechanical splices, Field mountable with required accessories & consumables , UL/ETL *R Listed & verified required for terminating

9.1 (i) 50/125 micron MM fiber OM3

9.2 (ii) 50/125 micron MM fiber OM4

9.3 (iii) 9.2/125 micron SM fiber

10. Optical Fiber Patch Cord , MM , SC-SC,OM-3

Duplex , 50/125 micron MM fiber , SC connector at both end , length as below with factory mount ceramic connector at both end UL/ETL *R Listed & verified

10.1 Length – 3 m

10.2 Length – 10 m

10.3 Length - 20 m

10.4 Length – 30 m

11. Optical Fiber Patch Cord , MM , LC-LC,

Duplex , 50/125 micron MM fiber , SC connector at one end and MTRJ connector on other end, length as below with factory mount ceramic connector at both end UL/ETL *R Listed & verified

11.1 Length – 3 m

Page 338 of 355



Compliance (Y/N)

11.2 Length – 10 m

11.3 Length - 20 m

11.4 Length – 30 m

12. Optical Fiber Patch Cord , SM , SC-SC,

Duplex , 9.2/125 micron SM fiber , SC connector at both end , length as below with factory mount ceramic connector at both end UL/ETL *R Listed & verified

12.1 Length – 3 m

12.2 Length – 10 m

12.3 Length --20 m

12.4 Length – 30 m

13. Optical Fiber Patch Cord , SM , LC-LC

Duplex , 9.2/125 micron SM fiber , SC connector at one end and MTRJ connector on other end, length of as below with factory mount ceramic connector at both UL/ETL *R Listed & verified

13.1 Length – 3 m

13.2 Length – 10 m

13.3 Length -20 m

13.4 Length – 30 m

14. Optical Fiber Patch Cord , MM , SC – LC,OM-3

Duplex , 50/125 micron MM fiber , SC connector at one end and LC connector on other end, length of as below with factory mount ceramic connector at both end UL/ETL *R Listed & verified

14.1 Length – 5 m

14.2 Length – 10 m

14.3 Length -20 m

14.4 Length – 30 m

15. Optical Fiber Patch Cord , SM , SC-LC

Duplex , 9.2/125 micron SM fiber , SC connector at one end and LC connector on other end, length as below with factory mount ceramic connector at

Page 339 of 355



Compliance (Y/N)

both end UL/ETL *R Listed & verified

15.1 Length – 3 m

15.2 Length – 10 m

15.3 Length - 20 m

15.4 Length – 30 m

16. Optical Fiber Patch Cord MM , OM3 Fiber, SC- SC, OM-4

Duplex , 50/125 micron MM OM-3 fiber , SC connector at both end, length as below with factory mount ceramic connector at both endUL/ETL *R Listed & verified

16.1 Length – 3 m

16.2 Length – 10 m

16.3 Length -20 m

16.4 Length – 30 m

17. Optical Fiber Patch Cord , MM , SC- LC, OM-4

Duplex , 50/125 micron SM OM-3 fiber , SC connector at one end and LC connector on other end, length as below with factory mount ceramic connector at both UL/ETL *R Listed & verified

17.1 Length – 3 m

17.2 Length – 10 m

17.3 Length 20 m

17.4 Length – 30 m

1. LIU , 24 fiber , Wall mount enclosure, lockable

Loaded with SC / LC couplers for 24 fibers 50/125 micron MM or 24 fibers 9.2/125 micron SM, Wall mountable metallic distribution enclosure with lock , should have inbuilt / pre-installed splice tray with all clamps , harnessing rings , ties etc, compatible cable management rings/ bars should be provided

2. LIU , 12 fiber , Wall mount enclosure , lockable

Loaded with SC /LC couplers for 12 fibers 50/125 micron MM or 12 fibers 9.2/125 micron SM, Wall mountable metallic distribution enclosure with lock ,

Page 340 of 355



Compliance (Y/N)

should have inbuilt / pre-installed splice tray with all clamps , harnessing rings , ties etc , compatible cable management rings/ bars should be provided

3. LIU , 12 fiber , 1 U Drawer style19” Rack mount enclosure

Loaded with SC / LC couplers & adaptor plates for 12 fibers 50/125 micron MM or 12 fibers 9.2/125 micron SM, 19” rack mountable metallic distribution enclosure slide & tilt drawer type 1 U/2U , should have inbuilt / pre-installed splice tray with all clamps , harnessing rings , ties etc, compatible cable management rings/ bars should be provided

4. LIU , 24 fiber , 1U Drawer ,19”Rack mount enclosure

Loaded with SC / LC couplers & adaptor plates for 24 fibers 50/125 micron MM or 24 fibers 9.2/125 micron SM, 19” rack mountable metallic distribution enclosure 2U height with removable back cover , should have inbuilt / pre-installed splice tray with all clamps , harnessing rings , ties etc, Front & rear compatible cable management rings/ bars should be provided

5. LIU , 48 fiber Drawer, 1U ,19” Rack mount enclosure

Loaded with SC / LC couplers & adaptor plates for 48 fibers 50/125 micron MM or 48 fibers 9.2/125 micron SM, 19” rack mountable metallic distribution enclosure 1U height with removable back cover , should have inbuilt / pre-installed splice tray with all clamps , harnessing rings , ties etc, Front & rear compatible cable management rings/ bars should be provided


Loaded with 72 LC Duplex Coupler ( 144 Fiber) with adaptor plates for OM3 or SM Fiber in 4U Rack space. It should have upgrade to Intelligent LIU in future with added extra hardware to managed the patching. Panel should have LED to identify the Port connectivity. It is high density patch panel to save the

Page 341 of 355



Compliance (Y/N)

rack space. It should have fiber management clips and cable entry glands. It should come with all the accessories.


Loaded with 96 LC Duplex Coupler ( 192 Fiber) with adaptor plates for OM3 or SM Fiber in 4U Rack space. It should have upgrade to Intelligent LIU in future with added extra hardware to managed the patching. Panel should have LED to identify the Port connectivity. It is high density patch panel to save the rack space. It should have fiber management clips and cable entry glands. It should come with all the accessories.

Page 342 of 355


26. Wi-Fi Access Point


Compliance (Y/N)

1. Brand (Specify)

2. Model (Specify)

3. Country of Origin (Specify)

4. Country of Manufacture

(Specify)

5. Standards IEEE 802.11g

IEEE 802.11b

IEEE 802.11

IEEE 802.11n

IEEE 802.3

6. Device Management

Web-Based – Internet Explorer v6 or later; Netscape Navigator v6 or later; or other Java- enabled browsers.SNMP v.3

7. Wireless Distribution System

AP Client

PtP Bridge

PtMP Bridge

Repeater

8. Security 64, 128, 152-bit WEP

802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) AES, TKIPWPA2

MAC Address Access Control (Wireless MAC Filtering)

9. Media Access Control

CSMA/CA with ACK

10. Wireless Frequency Range

2.4GHz to 2.4835GHz

11. Wireless Signal Range

Indoors: Up to 328 ft (100 meters)Outdoors: Up to 1312 ft (400 meters)

12. Modulation Technology

Orthogonal Frequency Division Multiplexing (OFDM)

Page 343 of 355



Compliance (Y/N)

Complementary Code Keying (CCK)DQPSK

DBPSK

13. Wireless Transmit Power

Minimum 15dBm (32mW) ± 2dB

14. Antenna Type Must be internal

15. Number of Antennas

(Specify)

16. LED Indicators Power

LAN (10/100 Mbps)

WLAN (Wireless Connection)

17. Temperature Operating: 32°F to 140°F (0°C to 40°C)Storing: 4°F to 149°F (-20°C to 65°C)

18. Humidity 95% maximum (non-condensing)

19. Power Input Ext. Power Supply 100v-230v 50Hz, 10W or above

20. Dimensions (Specify)

21. Weight (Specify)

22. Warranty Comprehensive warranty shall cover the whole system for 3 years (All charges, material, labor and other incidentals have to be borne by the supplier during the warranty)

23. Brochure Enclose original brochure of manufacture

Page 344 of 355


27. Antivirus


Compliance (Y/N)



3. Connects securely to any wireless hotspot

Yes

4. Blocks hackers from accessing computer

Yes

5. Removes virus from email

Yes

6. Guards against online identify theft

Yes

7. Blocks suspicious programs

Yes

8. Restores damaged or deleted files and folders

Yes

9. Tunes up PC and optimizes computer

Yes

10. Finds and fixes problem that slows the computer

Yes

11. Removes unwanted internet clutter

Yes

12. Restores system after failures

Yes

13. Undoes a bad software installation

Yes

Page 345 of 355


28. Optional (Additional) Items

S. No. Features/Specifications Specifications offered by the OEM / Vendor

Compliance (Y/N)

1. 320GB SATA HDD 5400 RPM

2. 500 GB SATA-II HDD 7200 rpm

3. 2 GB DDR3 memory

4. 4 GB DDR3 memory

5. 15" or higher TFT Monitor with 12 ms or better response time, TCO 03 certified

6. 17" or higher TFT LCD Monitor with 5 ms or better response time, TCO 03 certified with inbuilt speakers

7. 19" or higher TFT LCD Monitor with 5 ms or better response time, TCO 05 certified with inbuilt speakers & minimum 1.3MP webcam

8. 19" or higher TFT LCD Monitor with 5 ms or better response time, TCO 05 certified with inbuilt speakers

9. 21" TFT LCD Monitor with 8 ms or better response time, TCO 03 certified with inbuilt speakers

10. PCI Express x16 Graphics Accelerator Card ( minimum 128 bit, 512 MB Onboard Video memory and 12.8 GBps memory bandwidth)

11. PCIe graphics card with dedicated 1GB memory supporting OpenGL 2.1 or latest and DirectX 10 or latest, having minimum memory bandwidth of 25 GB/s & minimum 128 bit memory interface.

12. 16x DVD ROM Drive

13. Internal 16x or higher Slim DVD ROM Drive

14. Internal Slim DVD Writer

15. OEM Optical USB Scroll Mouse with Mouse pad

16. 104 Keys OEM Keyboard

17. Wireless Keyboard & wireless optical scroll mouse with pad

Page 346 of 355



Compliance (Y/N)

18. Microsoft wireless Keyboard & Microsoft Wireless Optical Scroll Mouse with Pad

19. 104 Keys Bilingual Keyboard with engraved keys

20. 104 Keys Cherry (Mechanical) Keyboard

21. 10/100/1000 Mbps Desktop Ethernet card

22. External Stereo Speakers 2x3 (RMS) with Stereo Microphone & Headphone

23. External Stereo Microphone with Stereo Headphone

24. Single user Norton Anti Virus S/W (Latest Version) for Windows OS with free upgrade license (Viruses definition & engine files) valid for one year

25. OEM Pack Windows 7 ProfessionaLEDition (Down gradable to XP) with OEM Pack optical Media

26. OEM Pack Windows 7 Home with OEM Pack optical Media

27. OEM Pack Windows 7 Ultimate Edition with OEM Pack optical Media

28. Latest version of Linux OS (RHEL) with all necessary Plug-ins/utilities, ATS and driver software in CD/DVD Media

29. Latest version of Linux OS (Suse) with all necessary Plug-ins/utilities, ATS and driver software in CD/DVD Media

30. Latest version of Linux Enterprise (RHEL) WS Edition OS with all necessary Plug-ins/utilities, ATS and driver software in CD/DVD Media

31. Latest version of Linux Enterprise (Suse) WS Edition OS with all necessary Plug-ins/utilities, ATS and driver software in CD/DVD Media

32. External USB Dual Layer DVD Writer (DVD +R/+RW & CD+R/+RW)

33. Blue Ray DVD Writer having minimum 4MB buffer, minimum 4x Speed for BD –R/ +R, SATA/IDE interface with all necessary accessories & softwares (Driver & writing)

Page 347 of 355



Compliance (Y/N)

34. Blue Ray DVD Writer having minimum 4MB buffer, minimum 4x Speed for BD –R/ +R, USB interface with all necessary accessories & softwares (Driver & writing)

35. External Modem - 56Kbps V.92 dialup/fax modem with V.42/MNP 2/4 error correction V.42/MNPS data compression & V.17 class and 2.0 Group III fax

36. ADSL Modem with downstream DTR up to 8Mbps & upstream up to 1Mbps, supporting latest ADSL standards with minimum one RJ11, one RJ45 & one USB ports

37. ADSL Modem with downstream DTR up to 24Mbps & upstream up to 3.5Mbps, supporting latest ADSL standards, built in firewall & VPN features, TR-067 & TR-069 compliance with one RJ11 & minimum four RJ45 ports

38. Wi Fi Compatible 108Mbps or higher Wireless I/F Card

39. Bluetooth USB Adapter

40. 108 Mbps Wi Fi Compatible USB dongle

41. TV Tuner Card with 30 fps Compatible with Windows

42. Four Port USB Splitter

43. Two port video splitter with required accessories & cables.

44. PCI Base Parallel interface card

45. Web Camera : VGA sensor (640 x480 pixel) resolution at up to 30 fps, built in microphone , still image up to 1.3 MP

46. 16GB Pen Drive

47. 32 GB Pen Drive

48. 250GB USB Pocket Drive

49. 500GB USB Pocket Drive

50. 1TB USB Drive

Page 348 of 355



Compliance (Y/N)

51. Single user Latest version antivirus software for windows platform with free upgrade of viruses definition & engine files, capable to remove all existing viruses, adware, spyware & Trojan horses. The software should also be capable to remove & proactively prevent system from all new viruses, spyware, adware & Trojan horses.

52. Data Backup and Recovery Software Single Client license with following Specifications

Support All flavors of Windows x86/64 bit Supports backup in a bootable hidden

partition, which could be password protected Supports Continuous Data Protection (CDP) Supports Live backup for all Applications

settings, System state, open files, hidden files, system files, including all attributes, dates, access rights, etc for the following file systems – FAT16/32, NTFS, Ext2/Ext3, ReiserFS, Linux SWAP

Supports Full, Incremental, Differential backup Files/Folders/Drives, which can be scheduled or event based

Supports deletion of file/folder/drive securely, which cannot be recovered by any means

Supports recovery with Bootable media Capable of searching data in archive Supports backup encryption level AES 256 Support recovery even on Bare-Metal

Supports mounting of backup archives for individual file recovery or exploring of backup recovery

Page 349 of 355


29. Tape Library


Compliance (Y/N)



3. Native data capacity >1.5 TB

4. Max Speed (MB/s) >140

5. Compression Capable? ALDC "2:1"

6. WORM Capable? Yes

7. Encryption Capable? Yes

8. Partition Capable? Yes

9. Tape Thickness <=6.4 µm

10. Tape Length Atleast 846 m

11. Tape tracks >1280

12. Write elements >16

13. Wraps per band 20

14. Linear density (bits/mm)

15,142

15. Encoding RLL 32/33; PRML

16. Cartridge memory >8 KiB

Page 350 of 355


30. System Software, Packaged Software, Patented Software, Proprietary Software and Antivirus

S. No. Software Type Name of Software S/W Version Standard or Professional

Enterprise or other edition

Compliance (Y/N)

1. Single user Latest version antivirus software for windows platform with free upgrade of viruses definition & engine files, capable to remove all existing viruses, adware, spyware & Trojan horses. The software should also be capable to remove & proactively prevent system from all new viruses, spyware, adware & Trojan horses

2. Data Backup and Recovery Software Single Client license with following Specifications

Support All flavors of Windows x 86/64 bit

Supports backup in a bootable hidden partition, which could be password protected

Supports Continuous Data Protection (CDP)

Supports Live backup for all Applications settings, System state, open files, hidden files, system files, including all attributes, dates, access rights, etc for the following file systems – FAT16/32, NTFS, Ext2/Ext3, ReiserFS, Linux SWAP

Supports Full, Incremental, Differential backup Files/Folders/Drives, which can be scheduled or event based

Supports deletion of file/folder/drive securely, which cannot be recovered by any means

Supports recovery with Bootable media

Page 351 of 355


S. No. Software Type Name of Software S/W Version Standard or Professional

Enterprise or other edition

Compliance (Y/N)

Capable of searching data in archive Supports backup encryption level AES

256 Support recovery even on Bare-Metal Supports mounting of backup archives for

individual file recovery or exploring of backup recovery

3. Single user Norton Anti Virus S/W (Latest Version) for Windows OS with free upgrade license (Viruses definition & engine files) valid for one year

4. OEM Pack Windows 7 ProfessionaLEDition (Down gradable to XP) with OEM Pack optical Media

5. OEM Pack Windows 7 Home with OEM Pack optical Media

6. OEM Pack Windows 7 Ultimate Edition with OEM Pack optical Media

7. Latest version of Linux OS (RHEL) with all necessary Plug-ins/utilities, ATS and driver software in CD/DVD Media

8. Latest version of Linux OS (Suse) with all necessary Plug-ins/utilities, ATS and driver software in CD/DVD Media

9. Latest version of Linux Enterprise (RHEL) WS Edition OS with all necessary Plug-ins/utilities, ATS and driver software in CD/DVD Media

Page 352 of 355


31. Portable Scanners – Technical Specifications31.1 A4 Portable Scanner



(Y/N)



3. Resolution (dpi) 300×300 (Low)

4. Capacity 1 GB Micro SD Card

5. Scan/ Document Size Upto A3 size

6. Color High Resolution 13 Seconds

7. Color Low Resolution 3 Seconds

8. Mono High Resolution 6 Seconds

9. Mono Low resolution 2.0 Seconds

10. Scan Width 8.27 inches

11. Scan Length 300 DPI: 50”(Max)

12. Capacity 300dpi color: 780 Photos, 300dpi mono: 1280 Photos

13. Format JPG, BMP, TIF, PDF, GIF, PNG, TGA, PCX

Page 353 of 355


31.2 A4-Color Portable Scanner S. No. Features Specifications Specifications offered


(Y/N)



3. Resolution (dpi) 600×600 (high)


5. Scan/ Document Size A4



8. Mono High Resolution

6 Seconds



11. Scan Length 600DPI: 25″(Max)



Page 354 of 355


31.3 A3 Portable Scanner


Compliance (Y/N)



3. Resolution (dpi) 300×300 (Low)


5. Scan/ Document Size A3



8. Mono High Resolution 6 Seconds



11. Scan Length 300 DPI: 50”(Max)



Page 355 of 355

Documents

Desktop – Technical Specifications - Icsilicsil.in/wp-content/.../2013/04/Final-Technical-Specificati… · Web viewPolaris office (Free) to create and edit all Microsoft Word