1
Santa Ana, CA Manufacturing Plant Columbus, OH Office 3301 W. Segerstrom Ave, Santa Ana, CA 92704 (714) 432-0600 Fax (714) 432-0660 www.designpoly.com Note: No individual material allows credit points to be achieved within LEED since each category is dependent on the total of all materials and their proportionate relationship to the total dollar cost of all materials. LEED Credit Contributions Energy & Atmosphere (EA Credit 1) - Optimize Energy Performance: (2-10 points) assists in reducing energy use based on ASHRAE/IESNA Standard 90.1-1999. Indoor Environmental Quality (IEQ Credit 4.1) - Low-Emitting Materials: Adhesives & Sealants (1 point) Sealants and Adhesives comply with VOC limits of SCAQMD Rule #1168 and/or Green Seal Standard GS-36. Indoor Environmental Quality (IEQ Credit 4.2) - Low-Emitting Materials: Paints & Coatings (1 point) Listed Mastics and Coatings comply with VOC limits of Green Seal Standard GS-11. Because LEED has become a nationally accepted benchmark for the design, construction and operation of high performance green buildings, achieving LEED certification for construction projects is becoming increasingly important. LEED certification points are based on the overall design concept and performance of the building. Design Polymerics Water-Based Sealants, Adhesives, Mastics, and Coatings can help you earn LEED credits on your project. DESIGN POLYMERICS ELIGIBLE PRODUCTS: DP 240 and DP 340 Zero VOC Foil Mastic Tapes DP 1010, DP 1015, DP 1020, and DP 1030 Zero VOC Water-Based Duct Sealants DP 1040 Butyl Gasket Tape DP 2500, DP 2501, and DP 2502 Water-Based Duct Liner Adhesives DP 2510, DP 2515, DP 2540, DP 2545, and DP 2550 Water-Based Protective Coatings DP 3050 and DP 3060 Water-Based Lagging Adhesives DP 5050 and DP 5060 Zero VOC Water-Based Weather Barrier Mastic Coatings Design Polymerics Sealants, Adhesives, Mastics, and Coatings help earn points for the categories listed below. C o n t r i b u t e s t o L E E D ® C r e d i t s EARN LEED ® CREDITS WITH DESIGN POLYMERICS SEALANTS, ADHESIVES, MASTICS AND COATINGS DP DESIGN POLYMERICS

DESIGNPOLYMERICS EARN LEED CREDITS · high performance green buildings, achieving LEED certification for construction projects is becoming increasingly important. LEED certification

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DESIGNPOLYMERICS EARN LEED CREDITS · high performance green buildings, achieving LEED certification for construction projects is becoming increasingly important. LEED certification

Utah

Nevada

California

Arizona

SacramentoReno

San Francisco

Las Vegas

Los Angeles

San Diego Phoenix

Santa Ana, CA Manufacturing Plant

Materials & Resource (MR Credit 5.2) - Regional Materials: (1-2 points) dependent on 10-20% of all material manufactured within a 500 mile radius of the project.

Santa Ana, CA Manufacturing PlantColumbus, OH Office

3301 W. Segerstrom Ave, Santa Ana, CA 92704 (714) 432-0600 Fax (714) 432-0660 www.designpoly.com

Note: No individual material allows credit points to be achieved within LEED since each category is dependent on the total of all materials and their proportionate relationship to the total dollar cost of all materials.

LEED Credit Contributions

Energy & Atmosphere (EA Credit 1) - Optimize Energy Performance: (2-10 points) assists in reducing energy use based on ASHRAE/IESNA Standard 90.1-1999.

Indoor Environmental Quality (IEQ Credit 4.1) - Low-Emitting Materials: Adhesives & Sealants (1 point) Sealants and Adhesives comply with VOC limits of SCAQMD Rule #1168 and/or Green Seal Standard GS-36.

Indoor Environmental Quality (IEQ Credit 4.2) - Low-Emitting Materials: Paints & Coatings (1 point) Listed Mastics and Coatings comply with VOC limits of Green Seal Standard GS-11.

Because LEED has become a nationally accepted benchmark for the design, construction and operation of high performance green buildings, achieving LEED certification for construction projects is becoming increasingly important. LEED certification points are based on the overall design concept and performance of the building. Design Polymerics Water-Based Sealants, Adhesives, Mastics, and Coatings can help you earn LEED credits on your project.

DESIGN POLYMERICS ELIGIBLE PRODUCTS: • DP 240 and DP 340 Zero VOC Foil Mastic Tapes • DP 1010, DP 1015, DP 1020, and DP 1030 Zero VOC Water-Based Duct Sealants • DP 1040 Butyl Gasket Tape • DP 2500, DP 2501, and DP 2502 Water-Based Duct Liner Adhesives • DP 2510, DP 2515, DP 2540, DP 2545, and DP 2550 Water-Based Protective Coatings • DP 3050 and DP 3060 Water-Based Lagging Adhesives • DP 5050 and DP 5060 Zero VOC Water-Based Weather Barrier Mastic Coatings

Design Polymerics Sealants, Adhesives, Mastics, and Coatings help earn points for the categories listed below.

Contr

ibut

es to LEED® C

redits

EARN LEED® CREDITSWITH DESIGN POLYMERICS SEALANTS, ADHESIVES, MASTICS AND COATINGS

DPDESIGNPOLYMERICS