Equipments and supplies used in an IVF laboratory:

Designing of new IVF ART Laboratory:

Setting up of an ideal laboratory is the key to success in IVF. To design ,built and setting up complete world class IVF center or lab is important turnkey project and you need an expert to take care of it.

Experience of Fertility specialists, Fertility embryologists and scientists the key factors to be kept in mind while setting up a state-of-the-art IVF lab. You need Specialist of IVF lab design. You need IVF lab designer ,who are driven by passion of success to ensure continuous development and delivery of State of the ART IVF Projects.

You need help you plan and design your lab space to best fit your clinic. Every lab has its own unique features. Any architect can design a room, but you must understand the type of work being done in the room to understand the work flow within the room. IVF lab design specialist will work with you to plan your lab’s work flow and help you best place your hood, incubators and micromanipulator.

Turnkey IVF Project Capability:

You should have IVF lab consultant, iui lab setup designer to do the site survey, Lab Design, HVAC, Modular IVF Lab, Equipments, Training, Project management and feasibility studies for setting up of ART Centre as per EUTCD, CAP & ICMR guidelines.

The IVF Lab Facility:

The center of any IVF clinic is the IVF laboratory, because this is where the embryos are actually made.

The IVF Lab Facility is the most critical work area in the entire ART Centre. In this area sperm embryos and Oocytes are manipulated openly after following disinfection and sterilization steps. The design consideration is normally on internal air quality (IAQ) requirements. The

facility can be Grade A, Grade B,Grade C, or Grade D depending on; the standard followed and implemented.

Here's a guide to setup ivf lab or iui lab setup of any modern ART Lab, to familiarise you with what happens to eggs and embryos and Equipments for setup of infertility IVF clinic, fertility clinics, Infertility and fertility doctors.

Understanding the minimum equipments necessary to set up an IVF laboratory and the principal supplies involved in the daily routine.

List of Equipments for a new infertility IVF clinic will be very long so we will list them for your reference below.

You will need IVF Equipment AND IVF Consumables like,MAKLER COUNTING CHAMBER,AUTOMATIC SPERM ANALYSERS,Sperm Class Analyser,Coda Inline and Xtra Inline Filters,IVF Workstation,IVF Chamber,CO2 Mini Incubator,Portable CO2 Incubator,Craft Suction Pump,CO2 Incubator,IVF Controlled Rate Freezer,micromanipulator company,micromanipulator,Laser for PGD and Embryo Biopsy,Oocyte and Embryo Analysis Software, Oosight Imaging System, glass Heating device for Microscopes, Heating Systems for microscopes, Anti-vibration Platform and Table, Modular Incubator Chamber, IUI Catheters, Embryo Transfer Catheters, Oocyte Collection Sets, Micropipettes for ICSI, ivf Pipettes, IVF Media for Assisted Reproduction, Seminal Collection Device, IVF Plasticware, Centrifuge and Spermfuge, Warming Plate and tray, Water Bath, Block Heater, Dry Bath, Portable Test Tube Warmer, Mixer or Shaker, Adjustable Volume Pipettor and Tips, Pipette Pump, Cryogenic Equipment, Cord Blood, Stem Cell, Lab Quality Management etc.

Guide to Optimizing IVF results by performing the right quality control like.....Optimize your results by performing simple quality control protocols for Incubators, Follicular aspiration pump, Fridge/ freezer - hot plates - hot blocks - stereomicroscope - laminar flow - air control, etc. new embryo culture systems (culture media, equipments) and clean air technology.

Starting A new IVF Lab means start contacting designers, architects, sellers, resellers, vendors, suppliers, agents, distributors to initiate slow, long and laborious process of discussing dates and negotiating rates. This, you will agree, will further eat into your most precious commodity "Time".

To design , built and setting up complete world class IVF center or lab is important turnkey project and you need an expert to take care of it. You need Specialist of IVF lab design like: Shivani Scientific Industries Pvt Ltd.

Shivani Scientific Industries is one such highly focused company for In-Vitro Fertilization clinic or laboratory setup worldwide. Today with their expertise in the field of IVF IUI ART ICSI lab or clinics they are in commanding potion to offer single stop complete solution for total IVF lab set up, IVf lab equipments and service products to reproductive / infertility professionals worldwide.

They also provide Turnkey Project Services for set up of In vitro Fertilization Labs popularly known as Test Tube Baby Centres.Their aim is to be your fully services partner and there approach is to give you precisely what you need.

Remember your IVF program is only as good as the lab which supports it.

Shivani Scientific Industries Pvt. Ltd.

Telephone:+91 22 28456768 84 / 5570 2442

info@shivaniscientific.com

http://www.shivaniscientific.com/ivfproducts/turnkeyproducts.htm

http://www.shivaniscientific.com/ivfproducts

http://ivfworld.wordpress.com/ivf-lab-setup

setup iui lab,ivf lab setup,new ivf lab setup,embryos,culture dish,ivf catheter,semen samples,motility,Pentoxifylline treatment,blastocyst,stimulant substances to improve sperm motility,assisted hatching,embryo biopsy,blastomeres,embryo freezing,Optimizing IVF results,Incubators,Follicular aspiration pump,Fridge,freezer,hot plates,hot blocks,stereomicroscope,laminar flow,air control, etc.new embryo culture systems,embryo handling,Sperm preparation techniques,Micromanipulators,culture medium and dishes,classical IVF technique,Oocytes intracytoplasmic sperm injection,infertility clinic setup,setup fertility center, setup infertility clinic,setup iui lab,ivf lab setup,new ivf lab setup, setup iui lab,ivf lab setup,new ivf lab setup,setup infertility clinic,setup iui lab,ivf lab setup,new ivf lab setup,IVF Equipment,IVF Consumables like,MAKLER COUNTING CHAMBER,AUTOMATIC SPERM ANALYSERS,Sperm Class Analyser,Coda Inline and Xtra Inline Filters,IVF Workstation,IVF Chamber,CO2 Mini Incubator,Portable CO2 Incubator,Craft Suction Pump,CO2 Incubator,IVF Controlled Rate Freezer,micromanipulator company,micromanipulator,Laser for PGD and Embryo Biopsy,Oocyte and Embryo Analysis Software,Oosight Imaging System,glass Heating device for Microscopes,Heating Systems for microscopes,Anti-vibration Platform and Table,Modular Incubator Chamber,IUI Catheters,Embryo Transfer Catheters,Oocyte Collection Sets,Micropipettes for ICSI,ivf Pipettes,IVF Media for Assisted Reproduction,Seminal Collection Device,IVF Plasticware,Centrifuge and Spermfuge,Warming Plate and tray,Water Bath,Block Heater,Dry Bath,Portable Test Tube Warmer,Mixer or Shaker,Adjustable Volume Pipettor and Tips,Pipette Pump,Cryogenic Equipment,Cord Blood,Stem Cell,Lab Quality Management

Turnkey Projects for Q Modular Operating Rooms

Q Intensive Care Unit (ICU)

Q Cardiac Care Unit (CCU)

Q Invitro Fertilization Labs (IVF)

Q Centralized Biomedical Waste

Disposal Facility

Shivani Healthcare Engineering

_- With Shivani... Success Assured.

From Project to Reality

Overall Objectives &

Capacity

Define

2 I Shivani Healthcare Engmeering

Regulations

and

Safety

Comply

International Regulatory Guidelines

Select

and

Integrate

Design

.::. - B .::. -

Turnkey Projects for ~ Modular Operating Rooms

~ Intensive Care Unit (ICU)

~ Cardiac Care Unit (CCU)

~ Invitro Fertilization Labs (IVF)

~ Centralized Biomedical Waste

On Time

and

On Budget

Disposal Facility

Build

Training

and

Support

Run ASSURED SUCCESS

Shivani Healthcare Engineering 13

Turnkey Projects for Invitro

From Scratch to Finish

Shivani Scientific Industries Pvt. Ltd. , INDIA is driven by passion of success

to ensure continuous development and delivery of State of the ART IVF

Projects. We have relentless passion for quality and success in everything we

do.

Turnkey Project Capability

Shivani Scientific is a leading company in the world today offering single

window service such as site survey, Lab Design, HVAC, Modular IVF Lab,

Equipments, Training , Project management and feasibility studies for setting up

of ART Centre as per EUTCD, CAP & ICMR guidelines. Shivani Scientific has

undertaken many projects nationally including reputed All India Institute of

Medical Sciences (AIIMS) and Internationally such as British American

Hospitals, Port Louis, Mauritius.

The IVF Lab Facility

The IVFLab Facility is the most critical work area in the entire ART Centre. In

this area sperm embryos and Oocytes are manipulated openly after following

disinfectiop and sterilization steps. The deSign consideration is normally on

internal air quality (IAQ) requirements. The facility can be Grade A, Grade B,

Grade C, orGrade D depending on; the standard followed and implemented .

Sample Procurement

In assisted conception , 2 types of biological samples enter the system,

spermatozoa and Oocyte. Unlike many other areas of tissues banking where

specimen are taken from different areas. Assisted reproduction deals with

donors of garnets, sperm none of these samples can be disinfected or

sterilization prior to use in IVF Lab and process of Invitro fertilization and

.. Fertilization 2 PN 2 PB Stage

8 1 Shivani Healthcare Engineering

--- -- - - -

---- -... , o·

OOCYTE SCANNING AREA

OOCYTE PICKUP OT

IVF LABORATORY

.. 2 Cell Stage Embryo

Fertilization Labs (IVF)

Sample Handling and Processing

The IVF Lab designs prime purpose should be to ensure the quality and

safety of transplanted tissue and cells while this means that specimen handling

must be performed in a way that they should minimize risks of infection and

disease transmission. It must also ensure that the processing requirements do

not compromise the functional potential of the cells.

Positive Pressure Design

The IVF Lab should employ positive pressure to exclude contamination

coming from surrounding areas with the provision of fresh air intake to replace

C02 Gas released in the IVF Lab. This not only will protect the embryos but also

the embryologist.

Modular Clean Room and Air Quality

The air quality required may vary from air grades A-D. Microbial

contaminant level can be minimized with Hepa filtration , vac filtrations and

modular clean room design. The Modular cleanroom concept facilitates ease in

building of partitions, ease of cleanability, coving of joints, provision for electrical

and Gas pipelines with proper aesthetic looks.

Packing, Labeling and Storage

The IVF Lab design should also addressed to the packing of the Tissues and

Cells storage which in the case of reproductive material means cryo banking.

Traceability

The IVF Lab design should also lead to the pronouncement of required standards for traceability of specimen. This will involve labeling specification and requirement for data retention.

.. 4 Cell Stage Embryo Blastocyst

r

CRYO & FREEZING AREA

MICROMANIPULATION STATION

-

EMBRYO BIOPSY WORKSTATION

New Born Baby

Shivani Healthcare Engineering 19

IVF Equipment and IVF Consumables

Sperm Fuge

Mobile Nest

Lab + Guard

Warming Blocks

TurnKey Projects

Rapid RecoverySystem

IVF Products » IVF Division

Click here to know more Click here to know more

Click here to know more Click here to know more

Click here to know more Click here to know more

Click here to know more Click here to know more

Click here to know more Click here to know more

Click here to know more Click here to know more

Click here to know more Click here to know more