404
DESIGNATED SOURCES FOR MATERIALS (DSM) DESIGN AND CONTRACT STANDARDS OFFICE ISSN 1919-5125 © Copyright Queen’s Printer for Ontario 2018 Reproduced With Permission

DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

DESIGNATEDSOURCESFORMATERIALS(DSM)

DESIGN AND CONTRACT STANDARDS OFFICE ISSN 1919-5125

© Copyright Queen’s Printer for Ontario 2018 Reproduced With Permission

Page 2: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 3: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

To all users of this publication:

The information contained herein has been carefully compiled and is believed to be accurate at the date of publication. Freedom from error however cannot be guaranteed.

Enquiries regarding distribution of this manual and/or amendments, suggestions, or comments should be directed to:

ISSN 1919-5125 © Copyright Queen’s Printer for Ontario 2018

Ministry of Transportation

Design & Contract Standards Office Highway Standards Branch 301 St. Paul Street, 2nd Floor St. Catharines, Ontario L2R 7R4 Tel Number: (905) 704-2293 Fax Number: (905) 704-2051

Ministère des Transports Bureau de la conception et des normes de contrats Direction des normes routières 301, rue St. Paul, 2e étage St. Catharines (Ontario) L2R 7R4 Tél. : (905) 704-2293 Téléc. : (905) 704-2051

Page 4: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 5: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Page 1 of 1

RECORD OF REVISIONS

DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL

This manual includes revisions as shown below. Revisions are numbered sequentially and should be recorded below when incorporated into the manual. Revision Number

Revision Date

Entered By

Revision Number

Revision Date

Entered By

93 Feb 1, 2018 R. Kyte 119

94 120

95 121

96 122

97 123

98 124

99 125

100 126

101 127

102 128

103 129

104 130

105 131

106 132

107 133

108 134

109 135

110 136

111 137

112 138

113 139

114 140

115 141

116 142

117 143

118 144

Page 6: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 7: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

2 GRADING2.35 Fill

2.35.30 Lightweight Fill Material

3 PAVEMENTS3.05 Asphalt

3.05.10 Anti-Stripping Treatments (formerly Anti-strippingAdditives)

3.05.22 Asphalt Cement, Performance Graded (PGAC)3.05.25 Aggregates: Surface Friction Courses3.05.30 Emulsified3.05.40 Crack Sealant, Rubberized Asphalt, Hot Poured3.05.45 Liquid3.05.70 Patching, Proprietary Products

3.20 Concrete3.20.45 Joint Sealant, Rubberized Asphalt, Hot Poured

5 GENERAL CONSTRUCTION5.50 Noise Barriers

5.50.20 Concrete5.50.40 Noise Barrier on Structures5.50.50 Noise/Traffic Barriers5.50.60 Plastic, Fibre Reinforced5.50.85 Steel5.50.90 Wood

5.70 Signing5.70.35 Inks, Transparent5.70.64 Sheeting, Type I (Engineering Grade)5.70.68 Sheeting, Type III And Type IV (High-Intensity)5.70.69 Sheeting, Type V (Super-High-Intensity)5.70.70 Sheeting, Type VI, Roll Up (High Reflectivity,

Micro-Prismatic, Fluorescent)5.70.71 Sheeting, Type VII, Type VIII and Type IX (High

Reflectivity, Micro-Prismatic, Fluorescent)5.70.73 Sheeting, Type XI (Proposed) - Diamond Grade DG3

Series 40005.70.75 Sheeting, Vinyl5.70.76 Sheeting, Vinyl, Fluorescent

5.80 Traffic Barriers5.80.25 Temporary Concrete Barrier

5.85 Traffic Guidance5.85.18 Delineator Posts, Flexible5.85.25 Guide Rail Reflectors5.85.33 Line Obliterating Paint, Pavement Markings, Temporary5.85.35 Line Removal Systems, Pavement Markings5.85.38 Lines, Permanent, Glass Beads, Reflective5.85.40 Lines, Permanent, Paint, Pavement Markings5.85.43 Lines, Permanent, Polymeric Spray, Pavement Markings5.85.44 Lines, Permanent, Two Year Pavement Markings5.85.45 Lines, Permanent, Durable, Pavement Markings5.85.50 Lines, Temporary, Tape, Pavement Markings5.85.55 Markers, Pavement, Raised, Permanent5.85.56 Markers, Pavement, Recessed, Permanent

Ontario Ministry of Transportation

Designated Sources of Material (DSM) Index

DSM Index Page 1 of 5 Revision Date: 01-Feb-2018

Page 8: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

6 ELECTRICAL6.05 Cable and Associated Hardware

6.05.06 Cable, Extra Low Voltage, Loop Detector Lead-in Type6.05.12 Cable, Interconnection6.05.17 Cable, Low Voltage, Pre-emption **6.05.19 Cable, Traffic Signals, Riser6.05.20 Cable, Traffic Signals6.05.30 Duct Fittings, Expansion and Deflection6.05.45 Grounding Rods

6.25 Electrical Accessories6.25.35 In-line Fuse Holder, Break-away6.25.60 Photoelectric Controller6.25.62 Photoelectric Controller Mounting Adapter6.25.75 Steel Footing6.25.80 Steel Footing, Mounting Hardware Kit6.25.85 Thread Locking Compound

6.28 Electronic Controlling Equipment, Traffic Signals6.28.12 Cabinet 3326.28.13 Cabinet 332, MTO6.28.14 Cabinet 3366.28.15 Cabinet 401 C,D,S,R6.28.16 Digital Thermostat6.28.17 Cabinet Heater6.28.19 Conflict Monitor6.28.20 Conflict Monitor 2126.28.25 Controller 1706.28.26 Controller 170E6.28.30 Emergency Vehicle Pre-emption Board6.28.35 Flasher 2046.28.40 Isolator, A.C. 2526.28.45 Isolator, D.C. 2426.28.50 Loop Detector 2226.28.70 Relay 4306.28.78 Steel Footing, Base Plate6.28.80 Switch Pack 200

6.30 Electronic Highway Information6.30.21 Portable Variable Message Signs (PVMS)

6.40 Luminaires and Associated Hardware6.40.15 Brackets, Aluminum6.40.20 Brackets, Steel Truss6.40.40 High Mast, High Pressure Sodium, Luminaire6.40.42 High Mast, Light Emitting Diode ( LED ), Luminaire6.40.48 High Pressure Sodium, Lamps6.40.49 High Pressure Sodium, Lamps, with Igniter6.40.50 Roadway Lighting, High Pressure Sodium, Luminaire6.40.52 Roadway Lighting, Light Emitting Diode (LED),

Luminaire6.40.55 Obstruction Luminaire6.40.75 Sign Lighting6.40.80 Sign Truss Fittings6.40.85 Underpass Luminaire

6.60 Poles6.60.10 Aluminum6.60.11 Anchor, Rock Installation

Ontario Ministry of Transportation

Designated Sources of Material (DSM) Index

DSM Index Page 2 of 5 Revision Date: 01-Feb-2018

Page 9: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

6.60.12 Anchorage Assembly in Concrete6.60.15 Base, Grooved-Coupler6.60.20 Concrete, Spun6.60.35 High Mast, Device for Raising and Lowering6.60.40 High Mast, Sectional Steel6.60.75 Sectional Steel6.60.80 Steel, Base Mounted6.60.85 Heavy Class - Base Mounted - Steel, Sectional Steel6.60.90 Wood

6.65 Power Supply6.65.20 Assemblers of Control Cabinet Assemblies6.65.22 Enclosure for Control Cabinet6.65.25 Surge Arrestor6.65.40 Distribution Assembly6.65.45 L-Handles, Surface Mounted, Padlockable6.65.75 Substation Distribution Assembly

6.70 Traffic Electronic Control Equipment6.70.60 Traffic Signals, Portable, Temporary

6.80 Traffic Signal Actuation Equipment/Materials6.80.15 Detector, Emergency Vehicle Pre-emption **6.80.20 Detector, Loop, Sealant6.80.31 Detector, Probe6.80.40 Detector, Vehicle6.80.60 Pushbuttons, Pedestrian

6.85 Traffic Signal/Flasher Equipment6.85.25 Flasher Beacon and Pedestrian Signal Heads6.85.27 Flasher Beacon, Solar Powered6.85.35 Hanger Assembly6.85.45 Lamps6.85.47 LED Lamps (Signal Modules)6.85.70 Signal Arm, Overbrace6.85.75 Signal Arm, Single Member6.85.80 Signal Control, Flasher Complete Mechanism Assembly6.85.81 Signal Control, Flasher Mechanism Components6.85.83 Signal Control, Specialty Flasher6.85.90 Signal Head, Fibreoptic, Turn Arrow6.85.92 Traffic Signal Head6.85.94 Traffic Signal Head, Snow Shields6.85.95 Uninterruptible Power Supplies (UPS)

8 BUILDINGS8.25 Doors

8.25.40 Overhead, Insulated8.25.50 Overhead, Non-insulated

8.35 Heating Systems8.35.35 Infa-red Single Tube System8.35.40 Infra-red Vacuum Tube

9 STRUCTURAL9.15 Bearings, Bridge

9.15.25 Elastomeric, Laminated9.15.35 Grout, Cement Based Non-Shrink9.15.71 Rotational, Pot, Class 1A9.15.75 Rotational, Disc, Class 2A

Ontario Ministry of Transportation

Designated Sources of Material (DSM) Index

DSM Index Page 3 of 5 Revision Date: 01-Feb-2018

Page 10: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

9.15.80 Rotational, Spherical, Class 3A9.20 Coatings

9.20.10 Coal Tar Epoxy for Structural Steel Piles9.20.39 Low Voc9.20.60 Paint Coating Systems for Galvanized Surfaces9.20.65 Seal Coatings for Metallized Surfaces9.20.70 Two (2)-Coat Zinc-Rich Rapid Deployment Coating

Systems for Structural Steel9.20.90 Zinc-Rich Touch-up

9.25 Concrete9.25.05 Admixtures, Air Entraining9.25.10 Admixtures, Chemical and Superplasticizing9.25.25 Curing Membrane Compounds, Type 2, White

Pigmented9.25.40 Hydraulic Cements and Supplementary Cementing

Materials9.30 Dowel Adhesives

9.30.25 Acrylic and Epoxy Resins9.40 Joints

9.40.18 Expansion, Injection Systems for Armouring9.40.20 Expansion, Modular9.40.24 Expansion, Strip Seals Anchored in Concrete, Type A,

Steel Plate Clamping Device9.40.27 Expansion, Strip Seals Anchored in Concrete, Type C,

Retainers and Stop Bars9.40.30 Expansion, Strip Seals in Elastomeric Concrete, Type A,

Steel Plate Clamping Device9.40.32 Expansion, Strip Seals in Elastomeric Concrete, Type C,

Retainers9.40.33 Expansion, Strip Seals in Preformed Retainer, Anchored

on Existing Armouring9.60 Railing

9.60.30 Bridge Guide Rail9.65 Reinforcement

9.65.58 Reinforcing Steel Bars, Mechanical Connectors9.65.70 Reinforcing Steel, Epoxy Coated, Coaters &

Fabricators9.65.73 Reinforcing Steel, Organic Coating System, and

Patching Compounds9.65.76 Reinforcing Steel, Stainless, Mills and Fabricators9.65.80 Reinforcing Steel, Uncoated, Fabricators and Mills9.65.90 Glass Fibre Reinforced Polymer - Reinforcing Bar

9.70 Retainment of Soil9.70.52 Retained Soil Systems (RSS), False Abutment, High

Performance Level9.70.53 Retained Soil Systems (RSS), True Abutment9.70.56 Retained Soil Systems (RSS), Wall / Slope9.70.59 Retained Soil Systems (RSS) Roadbase Embankment

9.75 Sign Supports9.75.15 Bridge Mounted, Aluminum9.75.20 Column, Breakaway, Steel9.75.55 Overhead, Monotube, Steel

9.90 Waterproofing for Bridge Deck9.90.15 Asphalt, Rubberized, Hot Applied (Poured)

Ontario Ministry of Transportation

Designated Sources of Material (DSM) Index

DSM Index Page 4 of 5 Revision Date: 01-Feb-2018

Page 11: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

9.90.60 Protection Board

Ontario Ministry of Transportation

Designated Sources of Material (DSM) Index

DSM Index Page 5 of 5 Revision Date: 01-Feb-2018

Page 12: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 13: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

LIGHTWEIGHT FILL (LWF) SYSTEMS:Embankment Fill (EF)Pavement Subbase (PB)Structure Backfill (SF)Trench Backfill (TF)NOTES:- Acceptance (Acc in header) is a category, with status of Demonstration (DE) or Acceptance (A); Blank entry indicates a potential product- Unit Weight (kN/m3) shown (in-situ saturated) shall not exceed 15kN/m3.- Compressive strength (kPa) data field has an abbreviated header shown as CS.

Company LWFSystem

LWF # TradeIdentity

SupplyPoints

Unit Wt(kN/m3)

CS(kPa)

MaterialType

EnvReq'ts

Acc Comments

CEMATRIX(Canada) Inc.5440 - 53 Street SECalgary AB T2C 4B6Tel: 1-888-876-0484Fax: 403-243-9839Email: [email protected]: www.cematrix.com

PB 7 CMI GTA(Toronto)

5-10 500-700 Concrete No FlyAsh

A GroundwaterMonitoringwill beimplementedon 1st MTOproject

TF 7 CMG GTA(Toronto)

5-10 500-700 Concrete No FlyAsh

A GroundwaterMonitoringwill beimplementedon 1st MTOproject

EF, SF 7 CMF GTA(Toronto)

5-10 500-700 Concrete No FlyAsh

A GroundwaterMonitoringwill beimplementedon 1st MTOproject

Elastizell Canada Inc.116 Simcoe Street, 3rd FloorToronto ON M5H 4E2CanadaTel: 416-217-0222Fax: 416-591-7900Cellular: 416-436-4405Email:[email protected]: www.elastizellcanada.com

SF, PB,TF, EF

6 Elastizell 3-11 500-700 Concrete No FlyAsh

A GroundwaterMonitoringwill beimplementedon next MTOproject

Fransyl Ltée EF, SF 3 Geospec Terrabonne,Quebec

0.5 100-150 Polystyrene A

Lafarge Canada Inc.95 Hobson Rd.Hamilton ON L8H 0A4CanadaTel: 905-547-2131Web: www.lafarge-na.com

PB, TF,SF, EF

4 Type 1 -Litex 149

Hamilton 12.5 - 13 Slag A

EF, TF,SF, PB

4 Type 2 -Litex 143

Hamilton 14 - 15 Slag A

Northeast Solite Corporation 8 ESLA Saugerites,New York

8 Shale DE

Grading List # 2.35.30Fill Page 1 of 2Lightweight Fill Material Date: 01-Jun-2017

SPECIFICATIONS: NSSPDRAWINGS:CUSTODIAL OFFICE : MERO - Foundation Design - (416) 235-3715

Page 14: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company LWFSystem

LWF # TradeIdentity

SupplyPoints

Unit Wt(kN/m3)

CS(kPa)

MaterialType

EnvReq'ts

Acc Comments

Plasti-Fab Ltd. (Kitchener)1214 Union St, P.O. Box 1120Kitchener ON N2G 4G1CanadaTel: 519-571-1650Web: www.plastifab.com

EF, SF 1 Geospec Kitchener 0.5 100-150 Polystyrene A

Grading List # 2.35.30Fill Page 2 of 2Lightweight Fill Material Date: 01-Jun-2017

SPECIFICATIONS: NSSPDRAWINGS:CUSTODIAL OFFICE : MERO - Foundation Design - (416) 235-3715

Page 15: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Anti-Stripping Treatment (AST) means a treatment used to minimize stripping of asphalt cement from HMA aggregates, and the type can be eitherAST-AGG or AST-AC.- Aggregate Anti-Stripping Treatment (AST-AGG) means an AST applied directly to the HMA aggreagtes prior to incorporating them into the mixer ordryer at the HMA plant.- Asphalt Cement Anti-Stripping Treatment (AST-AC) means an AST added directly to the asphalt cement to be used in the mix, prior to incorporating itinto the mixer at the HMA plant.Notes:- Compatibility, effectiveness, and quantity of additive shall be verified with PGAC manufacturer.- Hydrated lime is exempt from this DSM listing.- Actual dosage shall be determined through TSR testing, using the particular aggregates and asphalt cement of the project according to ContractDocuments.

Company Product Name Type Minimum DosageAkzo Nobel Surface Chemistry LLCCroton River Center, 281 Fields LaneBrewster NY 10509Tel: 845-276-8329Fax: 845-277-1423Toll Free: 800-906-9977Email: [email protected]: www.akzonobel.com/asphalt

Redicote C-2914 AST-AC 0.3% by wt. of asphalt cement

Coco Asphalt Eng'g, Div/Coco Paving (Wilson Ave)949 Wilson AvenueToronto ON M3K 1G2CanadaTel: 416-633-9670Fax: 416-633-5318Web: www.cocogroup.com

Hyper-Stick 2000 AST-AC 0.8% by wt. of asphalt cement

Ingevity5255 Virginia Ave.,North Charleston SC 29406United StatesTel: 843-740-2205Fax: 843-740-2247Web: http://www.ingevity.com/

Distributor:McAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

Evotherm-3G AST-AC 0.5% by wt. of asphalt cement

Pavements List # 3.05.10Asphalt Page 1 of 3Anti-Stripping Treatments (formerly Anti-stripping Additives) Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 313, OPSS.PROV 1101, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 16: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Type Minimum DosageIngevity5255 Virginia Ave.,North Charleston SC 29406United StatesTel: 843-740-2205Fax: 843-740-2247Web: http://www.ingevity.com/

Distributor:Brenntag Canada Inc.43 Jutland RdToronto ON M8Z 2G6CanadaTel: 416-259-8231Fax: 416-259-5333Web: www.brenntag.ca

Pave Bond Lite AST-AC 0.5% by wt. of asphalt cement

Road Science6502 South Yale AvenueTulsa OK 74136United StatesTel: 918-960-3859Email: [email protected]: www.roadscience.net

AD-here LOF 65-00 AST-AC 0.5% by wt. of asphalt cement

AD-here 77-00 AST-AC 0.5% by wt. of asphalt cement

AD-here LOF 65-00CECA Base CAN

AST-AC 0.5% by wt. of asphalt cement

Ultrapave Corp.1300 Tiarco DriveDalton GA 30721United StatesTel: 706-277-1300Fax: 706-277-7876Toll Free: 800-727-8453Email: [email protected]: www.ultrapave.com

Distributor:The Miller Group (Gormley)287 Ram Forest RoadGormley ON L0H 1G0CanadaTel: 905-726-9518Fax: 905-726-4180Email: [email protected]: www.millergroup.ca

UP-5000 AST-AGG 0.0375% latex solids by wt. of totalaggregates

Pavements List # 3.05.10Asphalt Page 2 of 3Anti-Stripping Treatments (formerly Anti-stripping Additives) Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 313, OPSS.PROV 1101, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 17: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Type Minimum DosageZydex106 Hawk DriveMorrisville NC 27560USATel: 919-342-6551Email: [email protected]: www.zydexindustries.com

Distributor:Aecon Materials Engineering10 Perdue Court, Units 2-3Caledon ON L7C 3M6CanadaTel: 905-840-5914Fax: 905-840-7859Toll Free: 1-800-999-5380Web: www.aecon.com

ZycoTherm AST-AGG 0.015% undiluted ZycoTherm per unitweight of agggregate

ZycoTherm-EZ AST-AGG 0.01% undiluted ZycoTherm-EZ perunit weight of aggregate

Pavements List # 3.05.10Asphalt Page 3 of 3Anti-Stripping Treatments (formerly Anti-stripping Additives) Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 313, OPSS.PROV 1101, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 18: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 19: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Supply-Point is described as follows: If nothing is mentioned then it is a TERMINAL (where PGAC is modified/blended, but crude oil is not refined),otherwise ‘R’ for REFINERY (where crude oil is refined to produce PGAC and other products), ‘D’ for DEPOT (where PGAC is stored only).

Company Performance Grade Supply PointsAjax Asphalt Terminal12500 Stocker StDetroit MI 48217United StatesTel: 248-244-3356Fax: 248-244-1084Email: [email protected]: www.ajaxpaving.com

58-28 Detroit, MI

64-28 Detroit, MI

70-28 Detroit, MI

Bitumar Inc.11 155 Ste-Catherine Street EastMontreal QC H1B 0A4CanadaTel: 514-645-4561Fax: 514-645-6978Email: [email protected]: www.bitumar.com

52-34 Montreal

52-40 Montreal

58-28 Montreal

58-34 Montreal

64-28 Montreal

64-34 Montreal

70-28 Montreal

70-34 Montreal

Canadian Asphalt Industries Inc.400 Eastport Blvd.,Hamilton ON L6H 7S4CanadaTel: 905-549-4561Fax: 905-549-0866Web: http://www.canadianasphalt.com

52-28 Hamilton (Depot, Victoria Ave. North)

52-34 Hamilton (Terminal, Eastport Blvd) and Hamilton (Depot, Victoria Ave. North)

52-40 Hamilton (Terminal, Eastport Blvd) and Hamilton (Depot, Victoria Ave. North)

58-28 Hamilton (Terminal, Eastport Blvd) and Hamilton (Depot, Victoria Ave. North)

58-34 Hamilton (Terminal, Eastport Blvd) and Hamilton (Depot, Victoria Ave. North)

64-28 Hamilton (Terminal, Eastport Blvd) and Hamilton (Depot, Victoria Ave. North)

64-34 Hamilton (Terminal, Eastport Blvd) and Hamilton (Depot, Victoria Ave. North)

70-28 Hamilton (Terminal, Eastport Blvd) and Hamilton (Depot, Victoria Ave. North)

70-34 Hamilton (Terminal, Eastport Blvd) and Hamilton (Depot, Victoria Ave. North)

Pavements List # 3.05.22Asphalt Page 1 of 4Asphalt Cement, Performance Graded (PGAC) Date: 01-Dec-2016

SPECIFICATIONS: OPSS.PROV 313, OPSS.PROV 1101, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 20: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Performance Grade Supply PointsCoco Asphalt Eng'g, Div/CocoPaving (Wilson Ave)949 Wilson AvenueToronto ON M3K 1G2CanadaTel: 416-633-9670Fax: 416-633-5318Web: www.cocogroup.com

52-28 Millhaven, ON

52-34 Millhaven, ON

52-40 Millhaven, ON

58-28 Millhaven, ON

58-34 Millhaven, ON

64-28 Millhaven, ON

64-34 Millhaven, ON

70-28 Millhaven, ON

70-34 Millhaven, ON

Husky Energy (Head Office)PO Box 6525, Sta "D"Calgary AB T2P 3G7Tel: 403-ASPHALTFax: 403-298-6161Email:[email protected]: www.huskyenergy.ca

52-34 Lloydminster (R), AB

46-34 Lloydminster (R), AB

52-40 Lloydminster (R), AB

58-28 Lloydminster (R), AB

58-34 Lloydminster (R), AB

64-28 Lloydminster (R), AB

64-34 Lloydminster (R), AB

70-28 Lloydminster (R), AB

Kildair Service ULC92 Chemin DelangisSt-Paul de Joliette QC J0K 3E0Tel: 450-756-8091Fax: 450-756-4783Email: [email protected]: www.kildair.com

64-34 Sorel-Tracy, QC

58-28 Sorel-Tracy, QC

58-34 Sorel-Tracy, QC

52-40 Sorel-Tracy, QC

64-28 Sorel-Tracy, QC

52-34 Sorel-Tracy, QC

70-28 Sorel-Tracy, QC

Pavements List # 3.05.22Asphalt Page 2 of 4Asphalt Cement, Performance Graded (PGAC) Date: 01-Dec-2016

SPECIFICATIONS: OPSS.PROV 313, OPSS.PROV 1101, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 21: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Performance Grade Supply PointsMcAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

46-34 Oshawa, Hamilton, Valleyfield, Port-Stanley, Thunder-Bay, Winnipeg

52-28 Oshawa, Hamilton, Valleyfield, Port-Stanley, Thunder-Bay, Winnipeg, North-Bay,Ottawa

52-34 Oshawa, Hamilton, Valleyfield, Port-Stanley, Thunder-Bay, Winnipeg, North-Bay,Ottawa, Nellie-Lake

52-40 Oshawa, Hamilton, Valleyfield, Thunder-Bay

58-28 Oshawa, Hamilton, Valleyfield, Port-Stanley, Winnipeg, North-Bay, Ottawa,Windsor

58-34 Oshawa, Hamilton, Valleyfield, Thunder-Bay, Winnipeg, North-Bay, Ottawa,Nellie-Lake

64-28 Oshawa, Hamilton, Valleyfield, Port-Stanley, Thunder-Bay, Winnipeg, Windsor

64-34 Oshawa, Hamilton, Valleyfield, Thunder-Bay

70-28 Oshawa, Hamilton, Valleyfield, Port-Stanley, Thunder-Bay

70-34 Oshawa, Hamilton, Valleyfield, Thunder-Bay

58-40 Oshawa, Thunder-Bay

Distributor:R&D Performance Asphalts Ltd.1485 Rosslyn RoadThunder Bay ON P7E 6W1CanadaTel: 807-474-4460Fax: 807-475-5456Web: www.performanceasphalts.ca

52-34 Thunder-Bay (D)

58-34 Thunder-Bay (D)

58-40 Thunder-Bay (D)

64-34 Thunder Bay (D)

Suit-Kote Corporation1911 Lorings Crossing RoadCortland NY 13045United StatesTel: 607-753-1100Fax: 607-758-9189Email: [email protected]: www.suit-kote.com

64-28 McGraw, N.Y. and Tonawanda, N.Y.

70-28 McGraw, N.Y.

SWT Group1591 Kildare Rd.,Windsor ON N8W 2W2Tel: 519-967-0020Fax: 519-967-1220Email: [email protected]: www.swtgroup.com

58-28 Detroit, MI

64-28 Alma, MI

Pavements List # 3.05.22Asphalt Page 3 of 4Asphalt Cement, Performance Graded (PGAC) Date: 01-Dec-2016

SPECIFICATIONS: OPSS.PROV 313, OPSS.PROV 1101, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 22: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Performance Grade Supply PointsYellowline Asphalt Products Ltd.70 Hobson RoadHamilton ON L8H 0A5CanadaTel: 416-433-7569Email: [email protected]

52-34 Hamilton

58-28 Hamilton

58-34 Hamilton

64-28 Hamilton

64-34 Hamilton

70-28 Hamilton

70-34 Hamilton

Pavements List # 3.05.22Asphalt Page 4 of 4Asphalt Cement, Performance Graded (PGAC) Date: 01-Dec-2016

SPECIFICATIONS: OPSS.PROV 313, OPSS.PROV 1101, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 23: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:Pursuant to section GC 2.01 of General Conditions, the availability of raw materials or processed aggregates to the contractor from the locationsindicated below is not guaranteed.Letter designations M, D, T and G, shown in brackets beside each gravel/rock type in the "Product Description and Designation Type" column are usedto specify physical property requirements of OPSS.PROV 1003/SP 110S12."Requirements for Aggregate Anti-Stripping Treatments are listed below. Irrespective of any moisture sensitivity testing that shows that an Anti-StrippingTreatment is not required, the minimum dosage and type shown in the "Anti-Stripping REQUIRED for 12.5 FC 2, SMA 9.5, SMA 12.5 (Type, dosage bymass of total aggregate" column shall be used for all aggregates to be incorporated into SMA or 12.5 FC 2 mixes.

Company Source Name;Location

InventoryNumber

ApprovedUses

ProductDescriptionandDesignationType

Anti-StrippingREQUIRED for12.5 FC2, SMA9.5, SMA 12.5(Type, dosageby mass oftotalaggregate)

Remarks

Aecon Construction and MaterialsLimited12 Canam CrescentBrampton ON L7A 1A9CanadaTel: 905-454-1078Fax: 905-451-9827

MississaguaLanding Quarry;10 km north ofFlynns Turn

B09-009 12.5 FC1,12.5 FC2,HL1, DFC

Granite (M) Hydrated Lime,1%;ZycoTherm-EZsolids, 0.010%

The rock is brittle andsubject to breakdownwith handling.

Aecon Construction and MaterialsLimited12 Canam CrescentBrampton ON L7A 1A9CanadaTel: 905-454-1078Fax: 905-451-9827

Marmora OpenPit Mine; 2 kmsoutheast ofMarmora

C01-058 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

Open Pit MIneWaste (T)

Aecon Construction and MaterialsLtd.4949 Bank StreetGloucester ON K1X 1G7Tel: 613-822-2020Fax: 613-822-2590

Ottawa Quarry; 2km north ofSouth Gloucester

O05-072 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

DolomiticSandstone (D)

Hydrated Lime,1%

Only those productscrushed from the lowermember of the MarchFormation (9.8 m thick),partially exposed in thelower lift, are acceptable.

Brandes Aggregates2125 Great Northern RoadSault Ste Marie ON P6A 5K7CanadaTel: 705-759-2766Fax: 705-945-8861Email: [email protected]: http://www.brandesagg.ca/

Sault Ste MarieQuarry; 7 kmnorth of Sault SteMarie

S10-047 12.5 FC1,HL1

GraniteGneiss/Gabbro(M)

Pavements List # 3.05.25Asphalt Page 1 of 9Aggregates: Surface Friction Courses Date: 01-Feb-2018

SPECIFICATIONS: OPSS 310, OPSS.PROV 313, OPSS 1150, OPSS.PROV 1003, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Soils and Aggregates - (416) 235-3705

Page 24: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Source Name;Location

InventoryNumber

ApprovedUses

ProductDescriptionandDesignationType

Anti-StrippingREQUIRED for12.5 FC2, SMA9.5, SMA 12.5(Type, dosageby mass oftotalaggregate)

Remarks

Bruno's Contracting (Thunder Bay)Ltd.665 Hewitson StreetThunder Bay ON P7B 5V5CanadaTel: 807-623-1855Fax: 807-623-0360Email: [email protected]: www.brunoscontracting.com

Hansen Quarry;10 km east ofThunder Bay

O12-085 12.5 FC1,HL1

Metasedimentary(T)

Canadian Wollastonite(Div of2005948 Ontario Ltd)6675 Hwy 15Seeleys Bay ON K0H 2N0Tel: 613-387-2734Fax: 613-387-3934Email:[email protected]: www.canadianwollastonite.com

Kingston Quarry;2 km south ofSeeleys Bay

G02-124 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%; Zycothermsolids, 0.015%;ZycoTherm-EZsolids 0.010%

Danford Construction Ltd.326 Durham Street South, P.O. Box749Madoc ON K0K 2K0CanadaTel: 613-473-2468Fax: 613-473-5494Email: [email protected]:http://danfordconstructionltd.com/home-page/

Tweed Quarry; 9km east ofActinolite

K01-106 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

Gneiss (M) Hydrated Lime,1%;ZycoTherm-EZsolids 0.010%

The rock is brittle andsubject to breakdownwith handling.

DJL Construction Inc.20, rue CousineauHull QC J8Y 3M7CanadaTel: 819 770-2300Fax: 819 770-4600Email: [email protected]: www.djl.ca

Val-des-MontsQuarry; 4 kmsouth ofVal-des-Monts,Quebec

W24-016 12.5 FC1,HL1

Gneiss (M) The rock is brittle andsubject to breakdownwith handling.

Drain Bros. Excavating Ltd.6830 Hwy #7Havelock ONCanadaTel: 705-778-1555

Havelock Quarry;5 km East ofHavelock

C01-054 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

Trap rock (T)

Pavements List # 3.05.25Asphalt Page 2 of 9Aggregates: Surface Friction Courses Date: 01-Feb-2018

SPECIFICATIONS: OPSS 310, OPSS.PROV 313, OPSS 1150, OPSS.PROV 1003, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Soils and Aggregates - (416) 235-3705

Page 25: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Source Name;Location

InventoryNumber

ApprovedUses

ProductDescriptionandDesignationType

Anti-StrippingREQUIRED for12.5 FC2, SMA9.5, SMA 12.5(Type, dosageby mass oftotalaggregate)

Remarks

Dufferin Aggregates - a division ofCRH Canada Group Inc.2300 Steeles Avenue West, 4th floorConcord ON L4K 5X6Tel: 905-532-3000Fax: 905-761-7200Web: www.crhcanada.com

Bark LakeQuarry; 18 kmnortheast ofKinmount

G03-076 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

Gneiss (M) Hydrated Lime,1%

The rock is brittle andsubject to breakdownwith handling.

Ethier Sand and Gravel Limited2589 Ida StreetSudbury ON P3E 4W9CanadaTel: 705-522-6340Fax: 705-522-2984Web: www.ethiersandandgravel.ca

Dill Quarry; 15km south ofSudbury

C19-011 12.5 FC1,HL1

Gneiss (M) The rock is brittle andsubject to breakdownwith handling.

Fowler Construction Company Ltd.1206 Rosewarne Dr., P.O. Box 630Bracebridge ON P1L 1T9CanadaTel: 705-645-2214Fax: 705-645-5025Toll Free: 800-268-7687Web: www.fowler.ca

Fleming Quarry;4 km south ofWashago

O11-142 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%

The rock is brittle andsubject to breakdownwith handling.

RosewarneQuarry; 3 kmnortheast ofBracebridge

B17-013 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

Gneiss (M) Hydrated Lime,1%

The rock is brittle andsubject to breakdownwith handling.

McDougallQuarry; 4 kmeast of ParrySound

O08-030 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%

The rock is brittle andsubject to breakdownwith handling.

Foley Quarry; 4km east of ParrySound

O08-083 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%

The rock is brittle andsubject to breakdownwith handling.

Childs Quarry; 4km northeast ofBracebridge

B17-113-02 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%

The rock is brittle andsubject to breakdownwith handling.

Madill Quarry; 10km north ofUtterson

H05-025 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%

The rock is brittle andsubject to breakdownwith handling.

White's Quarry; 4km northeast ofHuntsville

H05-046 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%

Pavements List # 3.05.25Asphalt Page 3 of 9Aggregates: Surface Friction Courses Date: 01-Feb-2018

SPECIFICATIONS: OPSS 310, OPSS.PROV 313, OPSS 1150, OPSS.PROV 1003, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Soils and Aggregates - (416) 235-3705

Page 26: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Source Name;Location

InventoryNumber

ApprovedUses

ProductDescriptionandDesignationType

Anti-StrippingREQUIRED for12.5 FC2, SMA9.5, SMA 12.5(Type, dosageby mass oftotalaggregate)

Remarks

H H Construction Inc49 Portage RoadPetawawa ON K8H 2W8CanadaTel: 613-687-8154Fax: 613-687-8007Email:[email protected]: handhconstruction.ca

Black Bay Pit; 5km southwest ofPetawawa

P06-099 12.5 FC1,HL1

Gravel (G)

Hall Construction Inc.176 Louisa StreetParry Sound ON P2A 3C1CanadaTel: 705-746-8147Fax: 705-746-5301Web: www.hallconstructioninc.com

Turtle LakeQuarry; 7 kmnortheast ofRosseau

O08-118 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%

Hutcheson Sand & Gravel8 West Street SouthHuntsville ON P1H 1P2Tel: 705-789-4457Fax: 705-789-1049Toll Free: 1-800-461-5521Email: [email protected]: www.hutchesonsand.com

HuntsvilleQuarry; 5 kmwest of Huntsville

H05-009-02 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

Gneiss (M) Hydrated Lime,1%

The rock is brittle andsubject to breakdownwith handling.

IKO Industries Ltd. - Hamilton628 Victoria Avenue NorthHamilton ON L8L 8B3CanadaTel: 905-528-8707Fax: 905-528-1525Web: www.iko.com

Madoc Quarry; 6km west ofMadoc

C01-148 12.5 FC1,HL1

Andesite (T) Material from this sourceis acceptable for 12.5FC2 provided that 100percent passes the2.36mm sieve and itdoes not exceed 20percent of the total mixby volume.

Interpaving Limited885 Regent Street, Suite 2-B1Sudbury ON P3E 5M4CanadaTel: 705-522-9444Fax: 705-522-3253Email: [email protected]: www.interpaving.com

Coniston Quarry;2 km North ofConiston

C03-129 12.5 FC1,HL1

Diabase (T)

Pavements List # 3.05.25Asphalt Page 4 of 9Aggregates: Surface Friction Courses Date: 01-Feb-2018

SPECIFICATIONS: OPSS 310, OPSS.PROV 313, OPSS 1150, OPSS.PROV 1003, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Soils and Aggregates - (416) 235-3705

Page 27: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Source Name;Location

InventoryNumber

ApprovedUses

ProductDescriptionandDesignationType

Anti-StrippingREQUIRED for12.5 FC2, SMA9.5, SMA 12.5(Type, dosageby mass oftotalaggregate)

Remarks

J. & P. Leveque Bros. HaulageLimited30876 Hwy 62 N, RR#5Bancroft ON K0L 1C0CanadaTel: 613-332-5533Fax: 613-332-0497Toll Free: 800-727-5612Web: www.levequebros.com

Sutherland RoadQuarry; 15 kmnorth of Bancroft

B01-034 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%

Lafarge Canada Inc, East'n Cdn Aggr- Brockville Quarry1864 County Rd #2 (Prescott Rd), POBox 190Brockville ON K6V 5V2CanadaTel: 613-342-0262Fax: 613-345-0212Web: www.lafarge-na.com

BrockvilleQuarry; 3 kmnortheast ofBrockville

B15-039 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

DolomiticSandstone (D)

Hydrated Lime,1%

Only those productscrushed from the lowermember of the MarchFormation (7.6 m thick),partially exposed in thelower lift, are acceptable.

Lafarge Canada Inc., Concord7880 Keele Street, 3rd FloorConcord ON L4K 4G7Tel: 905-738-7070Fax: 905-738-7092Web: www.lafargecorp.com

ColdwaterQuarry; 5 kmeast ofWaubaushene

P22-035-02 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%

The rock is brittle andsubject to breakdownwith handling.

Lafarge Construction1651 Bearbrook RoadGloucester ON K1G 3K2Tel: 613-830-3060Fax: 613-830-0143Web: www.lafarge-na.com

HawthorneQuarry; 2 kmnorth of SouthGloucester

O05-155 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

DolomiticSandstone (D)

Hydrated Lime,1%

Only those productscrushed from the lowermember of the MarchFormation (8.8 m thick),partially exposed in thelower lift, are acceptable.

Lafarge Construction1651 Bearbrook RoadGloucester ON K1G 3K2Tel: 613-830-3060Fax: 613-830-0143Web: www.lafarge-na.com

Boyce Quarry; 2km north ofSouth Gloucester

O05-070 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

DolomiticSandstone (D)

Hydrated Lime,1%

Only those productscrushed from the lowermember of the MarchFormation (9.8 m thick),partially exposed in thelower lift, are acceptable.

Pavements List # 3.05.25Asphalt Page 5 of 9Aggregates: Surface Friction Courses Date: 01-Feb-2018

SPECIFICATIONS: OPSS 310, OPSS.PROV 313, OPSS 1150, OPSS.PROV 1003, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Soils and Aggregates - (416) 235-3705

Page 28: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Source Name;Location

InventoryNumber

ApprovedUses

ProductDescriptionandDesignationType

Anti-StrippingREQUIRED for12.5 FC2, SMA9.5, SMA 12.5(Type, dosageby mass oftotalaggregate)

Remarks

Magnetawan First Nation# 10 Hwy 529 RR. # 1, Box 15Britt ON P0G 1A0CanadaTel: 705-383-2477Fax: 705-383-2566Web:www.MagnetawanFirstNation.com

Britt Quarry; 4km east of Britt

K05-033 12.5 FC1,HL1

Gneiss (M) The rock is brittle andsubject to breakdownwith handling.

Miller Paving (North Bay) LimitedP.O. Box 565, 70 Couchie IndustrialRoadNorth Bay ON P1B 8J5Tel: 705-472-3312Fax: 705-472-1763Web: www.millergroup.ca

Birches RoadQuarry; 5 kmsoutheast ofNorth Bay

N05-184 12.5 FC1,HL1

Gneiss (M) The rock is brittle andsubject to breakdownwith handling.

PattersonQuarry; 9 kmwest of PortSydney

B17-024 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%; Zycothermsolids, 0.015%;ZycoTherm-EZsolids, 0.010%;UP 5000 solids,0.0375%

The rock is brittle andsubject to breakdownwith handling.

NFN Quarry; 5km west of NorthBay

S26-014 12.5 FC1,12.5 FC2,HL1

Gneiss (M) The rock is brittle andsubject to breakdownwith handling.

TemagamiQuarry; 3 kmnorthwest ofTemagami

T16-003 12.5 FC1 Open Pit MineWaste (T)

McClellanQuarry; 4 kmnorth of SevernBridge

G14-070-02 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%; UP 5000solids, 0.0375%

The rock is brittle andsubject to breakdownwith handling.

Allstone Quarry;7 km north ofFrench River

D10-083 12.5 FC1,12.5 FC2

Granite / Gneiss(M)

Hydrated Lime,1%

MRT Aggregate Inc.P.O. Box 270Brechin ON L0K 1B0Tel: 705-484-1101Fax: 705-484-5041

MethuenTownshipQuarry; 22 kmnorth of Havelock

B02-071 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

Gabbro (T) Hydrated Lime,1%; UP 5000solids, 0.0375%

The rock is brittle andsubject to breakdownwith handling.

Pavements List # 3.05.25Asphalt Page 6 of 9Aggregates: Surface Friction Courses Date: 01-Feb-2018

SPECIFICATIONS: OPSS 310, OPSS.PROV 313, OPSS 1150, OPSS.PROV 1003, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Soils and Aggregates - (416) 235-3705

Page 29: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Source Name;Location

InventoryNumber

ApprovedUses

ProductDescriptionandDesignationType

Anti-StrippingREQUIRED for12.5 FC2, SMA9.5, SMA 12.5(Type, dosageby mass oftotalaggregate)

Remarks

Ontario Trap Rock - Bruce MinesP.O. Box 309, Hwy. 17 EastBruce Mines ON P0R 1C0Tel: 705-785-3833Fax: 705-785-3160Toll Free: 800-449-4244 London OfficeEmail: [email protected]: www.tomlinsongroup.com

Bruce MinesQuarry; 4 kmeast of BruceMines

B22-072 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

Diabase (T)

Pioneer Construction Inc. (NorthBay)175 Progress Rd.North Bay ON P1A 0B8Tel: 705-472-0890Fax: 705-474-5154Email:[email protected]: www.pioneerconstruction.ca

DBC Quarry; 4km northwest ofNorth Bay

N05-166 12.5 FC1,HL1

Gneiss (M) The rock is brittle andsubject to breakdownwith handling.

Pioneer Construction Inc. (Sault SteMarie)845 Old Goulais Bay Rd.Sault Ste. Marie ON P6A 5K8CanadaTel: 705-541-2250Fax: 705-541-2251Web: www.pioneerconstruction.ca

Sault Ste. MarieQuarry; 6 kmnorth of SaultSte. Marie

S10-045 12.5 FC1,HL1

Gneiss (M)

Pioneer Construction Inc. (Sudbury)HO1 Ceasar RoadSudbury ON P0M 1N0CanadaTel: 705-560-7200Fax: 705-560-8263Web: www.pioneerconstruction.ca

Fisher HarbourQuarry; 10 kmnortheast of LittleCurrent

W20-049 12.5 FC1,HL1

Quartzite (T)

Pioneer Construction Inc. (ThunderBay)1344 Oliver RoadThunder Bay ON P7G 1K4CanadaWeb: www.pioneerconstruction.ca

White Pit; 5 kmnorthwest ofKakabeka Falls

K17-037 12.5 FC1,HL1

Gravel (G)

Pavements List # 3.05.25Asphalt Page 7 of 9Aggregates: Surface Friction Courses Date: 01-Feb-2018

SPECIFICATIONS: OPSS 310, OPSS.PROV 313, OPSS 1150, OPSS.PROV 1003, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Soils and Aggregates - (416) 235-3705

Page 30: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Source Name;Location

InventoryNumber

ApprovedUses

ProductDescriptionandDesignationType

Anti-StrippingREQUIRED for12.5 FC2, SMA9.5, SMA 12.5(Type, dosageby mass oftotalaggregate)

Remarks

Pioneer Construction Inc. (ThunderBay)1344 Oliver RoadThunder Bay ON P7G 1K4CanadaWeb: www.pioneerconstruction.ca

Finmark Quarry;5 km southeastof ShabaquaCorners

S20-066 12.5 FC1,HL1

Greywacke (T)

Pioneer Construction Inc. (ThunderBay)1344 Oliver RoadThunder Bay ON P7G 1K4CanadaWeb: www.pioneerconstruction.ca

CopenhagenQuarry; 15 kmnortheast ofThunder Bay

T21-060 12.5 FC1,HL 1

Diabase (T)

Gauthier Quarry;20 km northwestof Thunder Bay

S20-068 12.5 FC1,HL1

Metavolcanic-Metasedimentary(T)

R.W. Tomlinson Limited5597 Power RoadOttawa ON K1G 3N4Tel: 613-822-1867Fax: 613-822-6844Web: www.tomlinsongroup.com

Rideau RoadQuarry; 2 kmnorth of SouthGloucester

O05-067 12.5 FC1,12.5 FC2,HL1, DFC,SMA 9.5,SMA 12.5

DolomiticSandstone (D)

Hydrated Lime,1%

Only those productscrushed from the lowermember of the MarchFormation (8.8 m thick),partially exposed in thelower lift, are acceptable.

Sintra Inc, BourgetRegion Metropole 7 Rang St-RegisSaint-Isidore QC J0L 2A0CanadaTel: 450-638-0172Fax: 450-638-2909

Bourget Quarry;8 km north ofLachute, Quebec

L01-033 12.5 FC1,HL1

Gneiss (M) The rock is brittle andsubject to breakdownwith handling.

Smelter Bay Aggregates Inc.P.O. Box 400, Boundary RoadIndustrial ParkThessalon ON P0R 1L0CanadaTel: 705-842-2597Fax: 705-842-2527

Maple Ridge Pit;10 km east ofThessalon

I08-042 12.5 FC1,HL1

Gravel (G)

NestorvilleQuarry; 6 kmnorthwest ofThessalon

B22-076 12.5 FC1,12.5 FC2,HL1, DFC

Diabase (T)

Smith's Construction Company, Div.Miller GroupP.O. Box 218, 276 Madawaska Blvd.Arnprior ON K7S 3H4Tel: 613-623-3144Fax: 613-623-8769

Turcotte Pit; 5km southwest ofPetawawa

P06-074 12.5 FC1,HL1

Gravel (G)

Pavements List # 3.05.25Asphalt Page 8 of 9Aggregates: Surface Friction Courses Date: 01-Feb-2018

SPECIFICATIONS: OPSS 310, OPSS.PROV 313, OPSS 1150, OPSS.PROV 1003, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Soils and Aggregates - (416) 235-3705

Page 31: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Source Name;Location

InventoryNumber

ApprovedUses

ProductDescriptionandDesignationType

Anti-StrippingREQUIRED for12.5 FC2, SMA9.5, SMA 12.5(Type, dosageby mass oftotalaggregate)

Remarks

Taranis Contracting Group Ltd.1473 Rosslyn RoadThunder Bay ON P7E 6W1CanadaTel: 807-475-5443Fax: 807-475-5456Email: [email protected]: www.taranis.ca

Cedar Creek Pit;10 km west ofKakabeka Falls

K17-079 12.5 FC1,HL1

Gravel (G)

Thomas Cavanagh ConstructionLimited9094 Cavanagh RdAshton ON K0A 1B0Tel: 613-257-2918Fax: 613 253 0071Email: [email protected]: http://www.thomascavanagh.ca

Lanark Quarry; 5km northeast ofLanark

C04-014 12.5 FC1,12.5 FC2,HL1, DFC

Gneiss (M) Hydrated Lime,1%

Appleton Quarry;3 km north ofCarleton Place

C04-081 12.5 FC1,HL1

DolomiticSandstone (D)

Only those productscrushed from the lowermember of the MarchFormation (8 m thick) areacceptable.

Weeks Construction Inc.2 Lake Forest DriveMcDougall ON P2A 2W9CanadaTel: 705-746-5111Fax: 705-342-5113Web: www.weeksconstruction.com

CarruthersQuarry;15 kmsoutheast ofParry Sound

O08-052 12.5 FC1 AmphiboliteGneiss (M)

Pavements List # 3.05.25Asphalt Page 9 of 9Aggregates: Surface Friction Courses Date: 01-Feb-2018

SPECIFICATIONS: OPSS 310, OPSS.PROV 313, OPSS 1150, OPSS.PROV 1003, OPSS.PROV 1151DRAWINGS:CUSTODIAL OFFICE : MERO - Soils and Aggregates - (416) 235-3705

Page 32: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 33: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:Classes, types and grades of emulsified asphalt are shown in Tables-1 (Anionic), 2 (Cationic), 3 (High Float), 8 (Polymer-Modified) of OPSS.PROV 1103

Company Supply Points Grades Product Description UseCoco Asphalt Eng'g,Div/Coco Paving (WilsonAve)949 Wilson AvenueToronto ON M3K 1G2CanadaTel: 416-633-9670Fax: 416-633-5318Web: www.cocogroup.com

Clarkson RS1 Rapid Setting, Anionic Emulsified Asphalt Tack coating

Clarkson RS2 Rapid Setting, Anionic Emulsified Asphalt Surface treatment

Clarkson,Millhaven

SS1 Slow Setting, Anionic Emulsified Asphalt Tack coating

Clarkson CRS2 Rapid Setting, Cationic Emulsified Asphalt Surface treatment

Clarkson HF100S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Clarkson HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Millhaven HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Clarkson HF150SP Medium Setting, High Float, Anionic Polymer-ModifiedEmulsified Asphalt

Surface treatment

Millhaven HF150SP Medium Setting, High Float, Anionic Polymer-ModifiedEmulsified Asphalt

Surface treatment

Millhaven HF150MP Medium Setting, High Float, Anionic Polymer-ModifiedEmulsified Asphalt

Cold in-placerecycling

Clarkson HFMS2(ON) Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Duncor Enterprises Inc.101 Big Bay Point RoadBarrie ON L4N 8M5CanadaTel: 705-730-1999Fax: 705-730-7977Email: [email protected]: www.duncor.ca

Shanty Bay SS1 Slow Setting, Anionic Emulsified Asphalt Tack coating

Henry Company Canada Inc. Montreal RS1 Rapid Setting, Anionic Emulsified Asphalt Tack coating

Montreal SS1 Slow Setting, Anionic Emulsified Asphalt Tack coating

Pavements List # 3.05.30Asphalt Page 1 of 6Emulsified Date: 04-Apr-2017

SPECIFICATIONS: OPSS 1103, OPSS 305*, Manufacturer's Standards, OPSS 302*, OPSS 304, OPSS333*, OPSS.PROV 308

DRAWINGS: OPSD 0210.0700CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 34: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Supply Points Grades Product Description UseMcAsphalt Industries Ltd.106 Orenda RoadBrampton ON L6W 3W6CanadaTel: 905-459-4331Fax: 905-459-4343

Brampton RS1 Rapid Setting, Anionic Emulsified Asphalt Tack Coating

Brampton RS2 Rapid Setting, Anionic Emulsified Asphalt Surface treatment

Brampton SS1 Slow Setting, Anionic Emulsified Asphalt Tack Coating

Brampton CRS2 Rapid Setting, Cationic Emulsified Asphalt Surface treatment

Brampton HF100S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Brampton HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Brampton HF250S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Brampton HF150SP Medium Setting, High Float, Anionic Polymer-ModifiedEmulsified Asphalt

Surface treatment

Brampton HF150M Medium Setting, High Float, Anionic Emulsified Asphalt Cold-in-PlaceRecycling

Brampton HFRS2 Rapid Setting, High Float, Anionic Emulsified Asphalt SurfaceTreatment

Brampton HF1000M Medium Setting, High Float, Anionic Emulsified Asphalt Cold Patching Mix

Pavements List # 3.05.30Asphalt Page 2 of 6Emulsified Date: 04-Apr-2017

SPECIFICATIONS: OPSS 1103, OPSS 305*, Manufacturer's Standards, OPSS 302*, OPSS 304, OPSS333*, OPSS.PROV 308

DRAWINGS: OPSD 0210.0700CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 35: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Supply Points Grades Product Description UseMcAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

North Bay EAP Emulsified Asphalt Primer Priming orGranular sealing

North Bay CRS2 Rapid Setting, Cationic Emulsified Asphalt Surface treatment

North Bay CRS2P Rapid Setting, Cationic Polymer-Modified EmulsifiedAsphalt

Surface treatment

North Bay HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Ottawa EAP Emulsified Asphalt Primer Priming orGranular sealing

Ottawa RS1 Rapid Setting, Anionic Emulsified Asphalt Tack coating

Ottawa CRS2 Rapid Setting, Cationic Emulsified Asphalt Surface treatment

Ottawa HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Ottawa HF250S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Ottawa CRS2P Rapid Setting, Cationic Polymer-Modified EmulsifiedAsphalt

Surface treatment

Port Stanley RS1 Rapid Setting, Anionic Emulsified Asphalt Tack coating

Port Stanley RS2 Rapid Setting, Anionic Emulsified Asphalt Surface treatment

Port Stanley CRS2 Rapid Setting, Cationic Emulsified Asphalt Surface treatment

Port Stanley HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Port Stanley CRS2P Rapid Setting, Cationic Polymer-Modified EmulsifiedAsphalt

Surface treatment

Thunder Bay EAP Emulsified Asphalt Primer Priming orGranular sealing

Thunder Bay RS1 Rapid Setting, Anionic Emulsified Asphalt Tack coating

Thunder Bay RS2 Rapid Setting, Anionic Emulsified Asphalt Surface treatment

Thunder Bay SS1 Slow Setting, Anionic Emulsified Asphalt Tack coating

Thunder Bay HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Pavements List # 3.05.30Asphalt Page 3 of 6Emulsified Date: 04-Apr-2017

SPECIFICATIONS: OPSS 1103, OPSS 305*, Manufacturer's Standards, OPSS 302*, OPSS 304, OPSS333*, OPSS.PROV 308

DRAWINGS: OPSD 0210.0700CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 36: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Supply Points Grades Product Description UseMcAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

Thunder Bay HF250S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Oshawa EAP Emulsified Asphalt Primer Priming orGranular Sealing

Oshawa RS1 Rapid Setting, Anionic Emulsified Asphalt Tack coating

Oshawa RS2 Rapid Setting, Anionic Emulsified Asphalt Surface treatment

Oshawa SS1 Slow Setting, Anionic Emulsified Asphalt Tack coating

Oshawa CRS2 Rapid Setting, Cationic Emulsified Asphalt Surface treatment

Oshawa HF100S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Oshawa HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Oshawa HF250S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Oshawa CRS2P Rapid Setting, Cationic Polymer-Modified EmulsifiedAsphalt

Surface treatment

Oshawa HF150SP Medium Setting, High Float, Anionic Polymer-ModifiedEmulsified Asphalt

Surface treatment

Montreal EAP Emulsified Asphalt Primer Priming orGranular sealing

Montreal RS2 Rapid Setting, Anionic Emulsified Asphalt Surface treatment

Montreal SS1 Slow Setting, Anionic Emulsified Asphalt Tack coating

Montreal CRS2 Rapid Setting, Cationic Emulsified Asphalt Surface treatment

Montreal HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Montreal HF250S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Montreal CRS2P Rapid Setting, Cationic Polymer-Modified EmulsifiedAsphalt

Surface treatment

Montreal HF150SP Medium Setting, High Float, Anionic Polymer-ModifiedEmulsified Asphalt

Surface treatment

Montreal RS2P Rapid Setting, Polymer-Modified Emulsified Asphalt Surface treatment

Pavements List # 3.05.30Asphalt Page 4 of 6Emulsified Date: 04-Apr-2017

SPECIFICATIONS: OPSS 1103, OPSS 305*, Manufacturer's Standards, OPSS 302*, OPSS 304, OPSS333*, OPSS.PROV 308

DRAWINGS: OPSD 0210.0700CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 37: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Supply Points Grades Product Description UseMcAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

Winnipeg, MA EAP Emulsified Asphalt Primer Priming orGranular sealing

Winnipeg, MA RS1 Rapid Setting, Anionic Emulsified Asphalt Tack coating

Winnipeg, MA RS2 Rapid Setting, Anionic Emulsified Asphalt Surface treatment

Winnipeg, MA SS1 Slow Setting, Anionic Emulsified Asphalt Tack coating

Oshawa,Montreal, Ottawa,Thunder Bay,Winnipeg

SS-1HH Slow Setting, Anionic Emulsified Asphalt, Non-Tracking(Brand Name: Clean Bond Coat)

Tack Coating

Winnipeg, MA HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Winnipeg, MA HF250S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Winnipeg, MA HF150M Medium Setting, High Float, Anionic Emulsified Asphalt Cold-in-placerecycling

Montreal RS1 Rapid Setting, Anionic Emulsified Asphalt Tack coating

Montreal HFMS2(ON) Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Thunder Bay HF150MP Medium Setting, High Float, Anionic Polymer-ModifiedEmulsified Asphalt

Cold in-placerecycling

Thunder Bay,Oshawa,Winnipeg

HF-1000M Medium Setting, High Float, Anionic Emulsified Asphalt Cold Patching Mix

Oshawa HF150MP Medium Setting, High Float, Anionic Polymer-ModifiedEmulsified Asphalt

Cold in-placerecycling

Pounder Emulsions806-50th Street EastSaskatoon SK S7K 0X6CanadaTel: 306-934-1500Fax: 306-934-2052

Winnipeg, MA EAP Emulsified Asphalt Primer Priming orGranular sealing

Winnipeg, MA RS1 Rapid Setting, Anionic Emulsified Asphalt Tack Coating

Winnipeg, MA SS1 Slow Setting, Anionic Emulsified Asphalt Tack Coating

Winnipeg, MA HF100S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Winnipeg, MA HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Winnipeg, MA HF250S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Pavements List # 3.05.30Asphalt Page 5 of 6Emulsified Date: 04-Apr-2017

SPECIFICATIONS: OPSS 1103, OPSS 305*, Manufacturer's Standards, OPSS 302*, OPSS 304, OPSS333*, OPSS.PROV 308

DRAWINGS: OPSD 0210.0700CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 38: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Supply Points Grades Product Description UseSintra Inc, Granby101 Sintra RdSt-Alphonse de Granby QCJ0E 2A0CanadaTel: 450-375-4471Fax: 450-378-8381Toll free: 800-707-7832

St. Hyacinthe, PQ RS1 Rapid Setting, Anionic Emulsified Asphalt Tack coating

St. Hyacinthe, PQ RS2 Rapid Setting, Anionic Emulsified Asphalt Surface treatment

St. Hyacinthe, PQ SS1 Slow Setting, Anionic Emulsified Asphalt Tack coating

St. Hyacinthe, PQ CRS2 Rapid Setting, Cationic Emulsified Asphalt Surface treatment

St. Hyacinthe, PQ HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

St. Hyacinthe, PQ CRS2P Rapid Setting, Cationic Polymer-Modified EmulsifiedAsphalt

Surface treatment

St. Hyacinthe, PQ HF150SP Medium Setting, High Float, Anionic Polymer-ModifiedEmulsified Asphalt

Surface treatment

Walker Emulsions Ltd.4365 Corporate DrBurlington ON L7L 5P7CanadaTel: 905-336-1216Fax: 905-336-1403Email: [email protected]: www.walkerind.com

Burlington EAP Emulsified Asphalt Primer Priming orGranular sealing

Burlington RS1 Rapid Setting, Anionic Emulsified Asphalt Tack coating

Burlington RS2 Rapid Setting, Anionic Emulsified Asphalt Surface treatment

Burlington SS1 Slow Setting, Anionic Emulsified Asphalt Tack coating

Burlington CRS2 Rapid Setting, Cationic Emulsified Asphalt Surface treatment

Burlington HFRS2 Rapid Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Burlington HF100S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Burlington HF150S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Burlington HF250S Medium Setting, High Float, Anionic Emulsified Asphalt Surface treatment

Burlington CRS2P Rapid Setting, Cationic Polymer-Modified EmulsifiedAsphalt

Surface treatment

Burlington HFMS2(ON) Medium Setting, High Float, Anionic Emulsified Asphalt SurfaceTreatment

Burlington CRS-1P Rapid Setting, Cationic, Polymer-Modied EmulsifiedAsphalt

Stress AbsorbingMembraneInterlayer

Burlington HF-150M Medium Setting, High Float, Anionic Emulsified Asphalt Cold-in-placeRecycling

Pavements List # 3.05.30Asphalt Page 6 of 6Emulsified Date: 04-Apr-2017

SPECIFICATIONS: OPSS 1103, OPSS 305*, Manufacturer's Standards, OPSS 302*, OPSS 304, OPSS333*, OPSS.PROV 308

DRAWINGS: OPSD 0210.0700CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 39: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:- Pour Temperature is in degrees Celsius.- For all products shown, method of application is either by pressure or gravity feed.- For the purposes of this DSM, "Southern Ontario" is defined as Central Region, Southwestern Region, Ottawa District - west of Highway 416 fromJohnstown to Kemptville and then south of Highway 43 from Kemptville to Perth and Bancroft District - south of Highway 7 from Perth to Maberly thensouth of a line drawn from Maberly to Kinmount.

Company Product Name Pour Temperature Area UseCrafco Inc. (Crafco Way)6975 W Crafco WayChandler AZ 85226 2505USATel: 602-276-0406Fax: 480-961-0513Web: www.crafco.com

Ontario Source:Crafco, Inc. (ON)66 Akron RdToronto (Etobicoke) ON M8W 1T2CanadaTel: 800-528-8242Email: [email protected]: www.crafco.com

ROADSAVER #211 (34211) 190-210 Southern Ontario

ULTRASEAL 1190 190-205 Southern Ontario

ULTRASEAL 3405 180-200 All MTO Districts

ULTRASEAL 3407 LM 175-190 All MTO Districts

Deery 103GL 193-204 Southern Ontario

McAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

MACSEAL 6690-4 MOD (PreviousName: BERAM LM 3060)

170-200 All MTO Districts

MACSEAL 6690-1 (PreviousName: BERAM 190)

180-200 Southern Ontario

MACSEAL BDM (Previous Name:BEMALASTIC 1213 BDM)

180-195 Southern Ontario

Right Pointe CompanyP.O. Box 467, 234 Harvestore DriveDeKalb IL 60115-8604United StatesTel: 815-754-5700Fax: 815-754-5702Email: [email protected]: www.rightpointe.com

RP Type 1 MV 185 - 200 Southern Ontario

Pavements List # 3.05.40Asphalt Page 1 of 1Crack Sealant, Rubberized Asphalt, Hot Poured Date: 01-Dec-2016

SPECIFICATIONS: OPSS 341* (May 1994 replaced by SP 341S01 for MTO), OPSS 1212* (Replaced by SP 112S07for MTO)

DRAWINGS: OPSD 0508.0100, OPSD 3370.1000*, OPSD 3370.1010*CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 40: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 41: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Categoric Use Description Supply PointsHusky Energy (Head Office)PO Box 6525, Sta "D"Calgary AB T2P 3G7Fax: 403-298-6161Email:[email protected]: www.huskyroadsolutions.com

MTO Primer Primer Winnipeg & Lloydminster

MC30 Medium Curing Winnipeg & Lloydminster

MC70 Medium Curing Winnipeg & Lloydminster

MC250 Medium Curing Winnipeg & Lloydminster

MC800 Medium Curing Winnipeg & Lloydminster

MC3000 Medium Curing Winnipeg & Lloydminster

SC70 Slow Curing Winnipeg & Lloydminster

SC250 Slow Curing Winnipeg & Lloydminster

SC800 Slow Curing Winnipeg & Lloydminster

SC3000 Slow Curing Winnipeg & Lloydminster

McAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

MTO Primer Primer West Hill

MTO Primer Primer Ottawa

RC30 Rapid Curing West Hill

RC30 Rapid Curing Ottawa

RC30 Rapid Curing Thunder Bay

RC30 Rapid Curing North Bay

RC70 Rapid Curing West Hill

RC70 Rapid Curing Thunder Bay

RC70 Rapid Curing North Bay

RC250 Rapid Curing West Hill

RC800 Rapid Curing West Hill

RC3000 Rapid Curing West Hill

RC3000 Rapid Curing Ottawa

MC30 Medium Curing West Hill

MC70 Medium Curing West Hill

Pavements List # 3.05.45Asphalt Page 1 of 2Liquid Date: 01-Feb-2018

SPECIFICATIONS: OPSS 1102, OPSS 307, OPSS 1152, OPSS 305DRAWINGS: OPSD 0210.0700CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 42: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Categoric Use Description Supply PointsMcAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

MC250 Medium Curing West Hill

MC250 Medium Curing Thunder Bay

MC800 Medium Curing West Hill

MC3000 Medium Curing West Hill

MC3000 Medium Curing Ottawa

MC3000 Special TBI West Hill

SC70 Slow Curing West Hill

SC70 Slow Curing Ottawa

SC250 Slow Curing West Hill

SC800 Slow Curing West Hill

SC800 Slow Curing Thunder Bay

SC800 Slow Curing North Bay

SC3000 Slow Curing West Hill

MIP TBI West Hill

Pavements List # 3.05.45Asphalt Page 2 of 2Liquid Date: 01-Feb-2018

SPECIFICATIONS: OPSS 1102, OPSS 307, OPSS 1152, OPSS 305DRAWINGS: OPSD 0210.0700CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 43: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Products are categorized as winter or summer mixes based upon time of placement.

Company Product Name Seasonal CategoryOntario Source:Coco Asphalt Eng'g, Div/CocoPaving (Wilson Ave)949 Wilson AvenueToronto ON M3K 1G2CanadaTel: 416-633-9670Fax: 416-633-5318Web: www.cocogroup.com

QPR Summer Mix

QPR Winter Mix

EZ Street Asphalt - Ontario5800 Ambler Dr. Suite 210 Unit 60Mississauga ON L4W 4J4Tel: 647-401-6329Email: [email protected]: www.ezstreetasphalt.ca

EZ Street Cold Asphalt Winter Mix

Innovative Surface SolutionsCanada, Inc78 Orchard RdAjax ON L1S 6L1CanadaTel: 905-427-0318Fax: 905-683-9444Email: [email protected]: www.innovativecompany.com

IAR Summer Mix

McAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

Perma-Patch Winter Mix

Perma-Patch Summer Mix

Pavements List # 3.05.70Asphalt Page 1 of 1Patching, Proprietary Products Date: 01-Feb-2018

SPECIFICATIONS: OPSS 307, OPSS 1153DRAWINGS:CUSTODIAL OFFICE : MERO - Bituminous - (416) 235-3715

Page 44: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 45: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:Pour temperature is in degrees Celsius.For all products shown, method of application is either by pressure or gravity feed.For the purpose of this DSM, "Southern Ontario" is defined as Central Region and Districts 31, 32, 33, 41 and southern part of District 43 (the southernpart is south of a line drawn from the northwest corner of District 41 to Kinmount - formerly district 1 to 8).

Company Product Identity Pour Temperature Area of Use Applicable StandardsCrafco Inc.420 N. Roosevelt Ave.Chandler AZ 85226 2601USATel: 602-276-0406Fax: 480-961-0513Toll Free: 800-528-8242Email: [email protected]: www.crafco.com

Ontario Source:Crafco, Inc. (ON)66 Akron RdToronto (Etobicoke) ON M8W 1T2CanadaTel: 800-528-8242Email: [email protected]: www.crafco.com

ULTRASEAL 1190 190-205 Southern Ontario OPSS 1212

ULTRASEAL 3405 180-200 All Districts MTO

ULTRASEAL 3407 LMLow Modulus

175-190 All Districts MTO

Roadsaver 211 - Code#3421

190-210 South Ontario OPSS 1212

McAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

MACSEAL 6690-4 MOD(previously BERAM3060LM)

170-200 All Districts MTO

MACSEAL 6690-1(previously Beram 190)

180-200 Southern Ontario OPSS 1212

MACSEAL BDM(previously BEMALASTIC1213 BDM)

180-195 Southern Ontario OPSS 1212

Pavements List # 3.20.45Concrete Page 1 of 1Joint Sealant, Rubberized Asphalt, Hot Poured Date: 01-Dec-2015

SPECIFICATIONS: OPSS 369, OPSS 1212* (Replaced by SP 112S07 for MTO)DRAWINGS: OPSD 0508.0200CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 46: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 47: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product AttributeArmtec Hamilton (Durisol)70 Frid Street Suite 1Hamilton ON L8R 3K4CanadaTel: 289-975-4404Fax: 905-521-8658Email: [email protected]: www.armtec.com

Durisol Noise Barrier System Absorptive both sides, Post Spacing - up to 4.56m,Posts - steel or concrete

Transparant Panels using PARAGLAS SOUNDSTOPsystem. Product model DCAP (Durisol ConcreteAcrylic Panels).

This panel can be used with the Durisol Noise BarrierSystem.

Armtec NB24 Absorptive Durisol Concrete NoiseBarrier System

Absorptive one side, Post Spacing - up to 7.32m,Posts - steel or concrete

Armtec NB24 Reflective Concrete Noise BarrierSystem

Reflective both sides, Post Spacing - up to 7.32m,Posts - steel or concrete

Design Concrete Systems Ltd.56 Birch Street P.O. Box 839Seaforth ON N0K 1W0Tel: 519-527-0397Fax: 519-527-2325Toll Free: 1-877-253-4577Email: [email protected]: www.designconcrete.ca

Sound By Design Reflective Noise Barrier System Reflective both sides, steel post spacing up to 3.63m.

ACRYLITE 237 Transparent Panel with concreteframe

This panel can be used with Sound By Design andSoftSound By Design Noise Barrier Systems

SoftSound by Design Absorptive Noise Barrier System Absorptive both sides, steel post spacing up to 3.63m.

SoftSound by Design Absorptive Noise Barrier System Absorptive single side, steel post spacing up to 3.63m.

Hy-Grade Precast Concrete2411 First St, RR #1St. Catharines ON L2R 6P7CanadaTel: 905-684-8568Fax: 905-684-8560Toll Free: 1-800-229-8568Email: [email protected]: www.hygradeprecast.com

Soft-Sound Noise Barrier System Absorptive both sides, steel post spacing up to6.116m.

Soft-Sound Noise Barrier System Absorptive single side, steel post spacing up to6.116m.

Precast Reflective Noise Barrier System Reflective both sides, steel post spacing up to6.116m.

Prestressed Systems Inc.4955 Walker RoadWindsor ON N9A 6J3Tel: 519-737-1216Fax: 519-737-6464Email: [email protected]: www.theprecaster.com

Precast Reflective Noise Barrier System Reflective both sides, post spacing up to 6.18 m.Posts - steel or concrete

General Construction List # 5.50.20Noise Barriers Page 1 of 1Concrete Date: 02-Aug-2016

SPECIFICATIONS: Manufacturer's Standards, SP 760F01, OPSS 760DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 48: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 49: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product AttributeArmtec Hamilton (Durisol)70 Frid Street Suite 1Hamilton ON L8R 3K4CanadaTel: 289-975-4404Fax: 905-521-8658Email: [email protected]: www.armtec.com

Paraglas (Acrylite) Soundstop TL-4 System Transparent system with fragment retention feature foruse with PL2 or PL3 barrier walls on structures.

General Construction List # 5.50.40Noise Barriers Page 1 of 1Noise Barrier on Structures Date: 01-Apr-2016

SPECIFICATIONS: OPSS 760, Manufacturer's Drawings, SP 760F01DRAWINGS:CUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 50: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 51: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product AttributeArmtec Hamilton (Durisol)70 Frid Street Suite 1Hamilton ON L8R 3K4CanadaTel: 289-975-4404Fax: 905-521-8658Email: [email protected]: www.armtec.com

Durisol Type SP Precast reinforced concrete safety shape Durisoltraffic barrier (minimum 1 m height) with Durisol noisepanels (absorptive on one or both sides) and steelpost spacing up to 3.65 m.

Design Concrete Systems Ltd.56 Birch Street P.O. Box 839Seaforth ON N0K 1W0Tel: 519-527-0397Fax: 519-527-2325Toll Free: 1-877-253-4577Email: [email protected]: www.designconcrete.ca

Integrated Traffic Barrier for Sound By Design NoiseBarrier System

Precast reinforced concrete safety shape traffic barrier(minimum 1m height) with Sound By Design noisepanels (reflective or absorptive on one or both sides)and steel post spacing up to 3.63m.

General Construction List # 5.50.50Noise Barriers Page 1 of 1Noise/Traffic Barriers Date: 01-Apr-2016

SPECIFICATIONS: Manufacturer's Standards, OPSS 760, SP 760F01DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 52: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 53: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

No Records

General Construction List # 5.50.60Noise Barriers Page 1 of 1Plastic, Fibre Reinforced Date: 01-Apr-2016

SPECIFICATIONS: OPSS 760, Manufacturer's Drawings, SP 760F01DRAWINGS:CUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 54: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 55: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product AttributeCentria

Ontario Source:Silentium Group340 Henry Street Suite # 15Brantford ON N3S 7R5CanadaTel: 866-611-6044Fax: 866-402-0850Email: [email protected]: www.silentiumgroupco.com

Centria Eco Sound Barrier System Reflective both sides, 0.9m high bottom precastconcrete panel, steel post spacing up to 4.275m.Minimum offset of 5.0m shall be provided betweenedge of shoulder and face of system, includinginstallations located behind guide rail systems.

General Construction List # 5.50.85Noise Barriers Page 1 of 1Steel Date: 01-Apr-2016

SPECIFICATIONS: Manufacturer's Standards, OPSS 760, SP 760F01DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 56: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 57: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

General Construction Noise Barriers Wood

DSM # 5.50.90Page 1

Date: 01-Feb-2008

SPECIFICATIONS:DRAWINGS: CUSTODIAL OFFICE: Design & Contract Standards - 905-704-2295 Bidders Tendering Queries call (905) 704-2203

No Listings

Page 58: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 59: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Catalogue No Product Grade/ Type

Colour ProductCategoric UseIdentifier

Categoric UseDescription

3M Canada - Traffic Safety SystemsDivision1840 Oxford St E PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

3M Series 880, 990 Series990-EngineeringGrade, Series880-DiamondGrade and HighIntensity

HighlyTransparent(except black)

Colour Ink Series 990 3MProcess ColourInk for EngineerGrade Sheeting,Series 880 3MProcess ColourInk for HighIntensity andDiamond Grade

General Construction List # 5.70.35Signing Page 1 of 1Inks, Transparent Date: 02-Aug-2011

SPECIFICATIONS: NaDRAWINGS:CUSTODIAL OFFICE : Maintenance - Operations - (905) 704-2649 Bidders Tendering Queries call (905) 704-2203

Page 60: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 61: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES;Abbreviations: HA - Heat Activated, PS - Pressure Sensitive

Company Product Name Catalogue No Product Type Colour Backing Type3M Canada - Traffic Safety andSecurity Systems Division300 Tartan Drive PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

3M 3271 Type I Yellow PS

3M 3272 Type I Red PS

3M 3275 Type I Blue PS

3M 3277 Type I Green PS

3M 3290 Type I White PS

3M CW-80 Type 1 Cw-84 (Orange), CW-80 (White),CW-81 (Yellow)

PS

3M 5290, 5271 Type I Codes 5290 (white), and 5271(yellow). Can be applied attemperatures as low as -23°C.

PS

Arlon

Ontario Source:EM Plastic & Electric Products Ltd.

REFLECTA 2400-02 Type I Silver/White PS

REFLECTA 2400-05 Type I Blue PS

REFLECTA 2400-06 Type I Yellow PS

REFLECTA 2400-11 Type I Green PS

General Construction List # 5.70.64Signing Page 1 of 2Sheeting, Type I (Engineering Grade) Date: 01-Feb-2017

SPECIFICATIONS: OPSS 706 (Formerly OPSS 543), SP 706F02, ASTM D4956-13, MUTCD (ON) (Replaced byOntario Traffic Manual)

DRAWINGS:CUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 62: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Catalogue No Product Type Colour Backing TypeAvery Dennison - Graphics andReflective Films Division7542 N. Natchez AveNiles IL 60714Tel: 800-327-5917Fax: 888-327-1434Web:www.reflectives.averydennison.com

Engineer Grade 1500 Type I Silver/White PS

Engineer Grade 1501 Type I Yellow PS

Engineer Grade 1502 Type I Red PS

Engineer Grade 1504 Type I Orange PS

Engineer Grade 1505 Type I Blue PS

Engineer Grade 1507 Type I Green PS

Engineer Grade 1509 Type I Brown PS

Engineer Grade 1600 Type I Silver/White HA

Engineer Grade 1601 Type I Yellow HA

Engineer Grade 1602 Type I Red HA

Engineer Grade 1604 Type I Orange HA

Engineer Grade 1605 Type I Blue HA

Engineer Grade 1607 Type I Green HA

Engineer Grade 1609 Type I Brown HA

General Construction List # 5.70.64Signing Page 2 of 2Sheeting, Type I (Engineering Grade) Date: 01-Feb-2017

SPECIFICATIONS: OPSS 706 (Formerly OPSS 543), SP 706F02, ASTM D4956-13, MUTCD (ON) (Replaced byOntario Traffic Manual)

DRAWINGS:CUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 63: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

CatalogueNo

ProductGrade /Type

Colour ProductCategoricUseIdentifier

Categoric UseDescription

Ontario Source:3M Canada - Traffic Safety andSecurity Systems Division300 Tartan Drive PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

3M 3930, 3931,3932, 3934,3935, 3937

Type IIIand IV

White, Yellow, Red,Orange, Blue, Green

PS Pressure Sensitive

3M FlexiblePrismatic

3310,3311,3314,3334, 3336

Type IIIand IV

White, Yellow, Orange,Orange/White (4" stripe),Orange/White (6" stripe)

BW Barrel Wrap

3M DiamondGrade

3914, 3910 Type IIIand IV

Fluorescent Orange,White

BW Diamond Grade BarrelWrap - Codes 3914(Fluorescent Orange),3910 (White).

Avery Dennison - Graphics andReflective Films Division7542 N. Natchez AveNiles IL 60714Tel: 800-327-5917Fax: 888-327-1434Web:www.reflectives.averydennison.com

HighPerformance

WR 6104 Type IV Orange BW Barrel Wrap (Applicableto DSM 5.85.53)

HighPerformance

WR-6100 Type IV White BW Barrel Wrap (Applicableto DSM 5.85.53)

General Construction List # 5.70.68Signing Page 1 of 2Sheeting, Type III And Type IV (High-Intensity) Date: 01-Jun-2017

SPECIFICATIONS: OPSS 706 (Formerly OPSS 543), SP 706F02, ASTM D4956-13, MUTCD (ON) (Replaced byOntario Traffic Manual)

DRAWINGS:CUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 64: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

CatalogueNo

ProductGrade /Type

Colour ProductCategoricUseIdentifier

Categoric UseDescription

Avery Dennison - Graphics andReflective Films Division7542 N. Natchez AveNiles IL 60714Tel: 800-327-5917Fax: 888-327-1434Web:www.reflectives.averydennison.com

High IntensityPrismaticGradeReflectiveSheeting

T-6500 Type IIIand IV

White PS Pressure Sensitive

High IntensityPrismaticGradeReflectiveSheeting

T-6501 Type IIIand IV

Yellow PS Pressure Sensitive

High IntensityPrismaticGradeReflectiveSheeting

T-6507 Type IIIand IV

Green PS Pressure Sensitive

High IntensityPrismaticGradeReflectiveSheeting

T-6505 Type IIIand IV

Blue PS Pressure Sensitive

High IntensityPrismaticGradeReflectiveSheeting

T-6508 Type IIIand IV

Red PS Pressure Sensitive

High IntensityPrismaticGradeReflectiveSheeting

T-6509 Type IIIand IV

Brown PS Pressure Sensitive

ORAFOL Canada Inc2831 Bristol Circle Unit 1&2Oakville ON L6H 6X5CanadaTel: 905-829-2828Fax: 905-829-9941Toll Free: 888-727-3374Web: www.orafol.com

Oralite HighIntensityPrismatic

Series 5900 Type IV White, Yellow, Red,Orange, Blue, Green

PS High intensity Prismaticretroreflective filmconsisting of a long lifefilm and adhesivesystem for thefabrication of permanentoutdoor highway signs.

Oralite HighIntensityPrismaticConstructionGrade

Series 5930 Type IV Fluorescent Orange PS High intensity Prismaticretroreflective filmconsisting of a long lifefilm and adhesivesystem for thefabrication of permanentoutdoor highway signs.

General Construction List # 5.70.68Signing Page 2 of 2Sheeting, Type III And Type IV (High-Intensity) Date: 01-Jun-2017

SPECIFICATIONS: OPSS 706 (Formerly OPSS 543), SP 706F02, ASTM D4956-13, MUTCD (ON) (Replaced byOntario Traffic Manual)

DRAWINGS:CUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 65: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Catalogue No Product Grade/ Type

Colour ProductCategoric UseIdentifier

Categoric UseDescription

ORAFOL Americas Inc.120 Darling DriveAvon CT 06001-4217United StatesTel: 860-223-9297Fax: 860-223-0753Toll Free: 800-654-7570Web: www.orafol.com

Ontario Source:ORAFOL Canada Inc2831 Bristol Circle Unit 1&2Oakville ON L6H 6X5CanadaTel: 905-829-2828Fax: 905-829-9941Toll Free: 888-727-3374Web: www.orafol.com

SuperHi-Intensity

09-204-17 Type V Orange BW Barrel Wrap

General Construction List # 5.70.69Signing Page 1 of 1Sheeting, Type V (Super-High-Intensity) Date: 04-Apr-2017

SPECIFICATIONS: OPSS 706 (Formerly OPSS 543), SP 706F02, ASTM D4956-13, MUTCD (ON) (Replaced byOntario Traffic Manual)

DRAWINGS:CUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 66: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 67: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Catalogue No Product Grade /Type

Colour Categoric Use AltDescription

3M Canada - Traffic Safety SystemsDivision1840 Oxford St E PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

3M Diamond Grade RS-24 Type VI Fluorescent Orange Roll-up SignSheeting

General Construction List # 5.70.70Signing Page 1 of 1Sheeting, Type VI, Roll Up (High Reflectivity, Micro-Prismatic, Fluorescent) Date: 02-Aug-2011

SPECIFICATIONS: ASTM D523-08, ASTM E308-01, ASTM D2794-93(2010), ASTM E810-03(2008), ASTMD1044-08

DRAWINGS:CUSTODIAL OFFICE : Maintenance - Operations - (905) 704-2649 Bidders Tendering Queries call (905) 704-2203

Page 68: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 69: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Catalogue No Product Grade/ Type

Colour ProductCategoric UseIdentifier

Categoric UseDescription

3M Canada - Traffic Safety SystemsDivision1840 Oxford St E PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

3M DiamondGrade

3924S Type VIII FluorescentOrange

PS Adhesive Class1 PressureSensitive, HighBrightness,DurableFluorescent,Wide AnglePerformance

Avery Dennison - Graphics andReflective Films Division7542 N. Natchez AveNiles IL 60714Tel: 800-327-5917Fax: 888-327-1434Web:www.reflectives.averydennison.com

Canadian Source:Avery Dennison Graphics andReflective Products-Canada14 Winslow StreetToronto ON 60714CanadaTel: 416-580-1494Email:[email protected]:www.reflectives.averydennison.com

MVP, SeriesT-7500

7500 HighPerformance,Super (TypeVIII) PrismaticGrade

T-7500 (white),T-7501 (yellow),T-7505 (blue),T-7507 (green),T-7508 (red),T-7509 (brown),T-7511(fluorescentyellow), T-7513(fluorescentyellow-green)

PS PermanentPressureSensitive

Omni-View,Series T-9500

9500 Very HighPrismatic Grade(Type IX)

T-9500 (white),T-9501 (yellow),T-9505 (blue),T-9507 (green),T-9508 (red),T-9509 (brown),T-9511(fluorescentyellow), T-9513(fluorescentyellow-green),W-9514(fluorescentorange)

PS PermanentPressureSensitive

General Construction List # 5.70.71Signing Page 1 of 1Sheeting, Type VII, Type VIII and Type IX (High Reflectivity, Micro-Prismatic,Fluorescent)

Date: 02-Aug-2011

SPECIFICATIONS: ASTM D4956-11a, MUTCD (ON) (Replaced by the Ontario Traffic Manual - OTM) , OTM Book 7 -Mar 2001

DRAWINGS:CUSTODIAL OFFICE : Maintenance - Operations - (905) 704-2649 Bidders Tendering Queries call (905) 704-2203

Page 70: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 71: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Catalogue No Product Grade /Type

Colour ProductCategoric UseIdentifier

3M Canada - Traffic Safety SystemsDivision1840 Oxford St E PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

3M Diamond GradeDG3

Series 4000 (4090,4092, 4095, 4096,4097, 4024, 4081,4083)

Type XI White, Yellow, Red,Blue, Green,Fluorescent Orange,Fluorescent Yellow,Fluorescent YellowGreen

PS (PressureSensitive)

Avery Dennison - Graphics andReflective Films Division7542 N. Natchez AveNiles IL 60714Tel: 800-327-5917Fax: 888-327-1434Web:www.reflectives.averydennison.com

Canadian Source:Avery Dennison Graphics andReflective Products-Canada14 Winslow StreetToronto ON 60714CanadaTel: 416-580-1494Email:[email protected]:www.reflectives.averydennison.com

OmniCube SeriesT-11500

T-11500, T-11501,T-11505, T-11507,T-11508, T-11511,T-11513

Type XI White, Yellow, Blue,Green, Red,Fluorescent Yellow,FluorescentYellow-Green

PS (PressureSensitive)

General Construction List # 5.70.73Signing Page 1 of 1Sheeting, Type XI (Proposed) - Diamond Grade DG3 Series 4000 Date: 02-Aug-2011

SPECIFICATIONS: ASTM D4956-11a, MUTCD (ON) (Replaced by the Ontario Traffic Manual - OTM)DRAWINGS:CUSTODIAL OFFICE : Maintenance - Operations - (905) 704-2649 Bidders Tendering Queries call (905) 704-2203

Page 72: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 73: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Catalogue No Colour ProductCategoric UseIdentifier

Categoric UseDescription

Ontario Source:3M Canada - Traffic Safety SystemsDivision1840 Oxford St E PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

SCOTCHCAL 180-17 Blue PO Positional

SCOTCHCAL 180-46 Green PO Positional

SCOTCHCAL 3650 White PS Pressure Sensitive

SCOTCHCAL 180-10 White PO Positional

SCOTCHCAL 3652 Yellow PS Pressure Sensitive

SCOTCHCAL 180-15 Yellow PO Positional

SCOTCHCAL 3655 Black PS Pressure Sensitive

SCOTCHCAL 180-12 Black PO Positional

SCOTCHCAL,ElectroCut

7725 7725-12 (Black),7725-10 (White)plus 55 others

PS Pressure Sensitive,Electronic Cuttable

3M 1150/1160(Anti-graffiti), 1170(Electronic Cuttable)

Transparent OF Overlay Films

Arlon

Ontario Source:EM Plastic & Electric Products Ltd.

High Performance 2Mill Cast

2100-02 Vinyl, White PS Pressure Sensitive

High Performance 2Mill Cast

2100-03 Vinyl, Black PS Pressure Sensitive

High Performance 2Mill Cast

2100-61 Vinyl, Kelly Green PS Pressure Sensitive

General Construction List # 5.70.75Signing Page 1 of 2Sheeting, Vinyl Date: 02-Aug-2011

SPECIFICATIONS: CGSB-62-GP-3MDRAWINGS:CUSTODIAL OFFICE : Maintenance - Operations - (905) 704-2649 Bidders Tendering Queries call (905) 704-2203

Page 74: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Catalogue No Colour ProductCategoric UseIdentifier

Categoric UseDescription

Avery Dennison - Graphics andReflective Films Division7542 N. Natchez AveNiles IL 60714Tel: 800-327-5917Fax: 888-327-1434Web:www.reflectives.averydennison.com

Canadian Source:Avery Dennison Graphics andReflective Products Division68 Place Des PinsSte-Therese QC J7E FA8caTel: 450-430-7779Email: [email protected]

IMP/XL 1030 Green PS Pressure Sensitive

IMP/XL 1002HA White HA Heat Activated

IMP/XL 1002 White PS Pressure Sensitive

IMP/XL 1008 Yellow PS Pressure Sensitive

IMP/XL 1003HA Black HA Heat Activated

IMP/XL 1003 Black PS Pressure Sensitive

Overlay Film Clear(Anti Graffiti)

OL-1000 Clear PS Pressure Sensitive

Overlay Film Series OL-2000 OL-2001 Yellow,OL-2003 Black,OL-2004 Orange,OL-2005 Blue,OL-2007 Green,OL-2008 Red,OL-2009 Brown

PS Pressure Sensitive

General Construction List # 5.70.75Signing Page 2 of 2Sheeting, Vinyl Date: 02-Aug-2011

SPECIFICATIONS: CGSB-62-GP-3MDRAWINGS:CUSTODIAL OFFICE : Maintenance - Operations - (905) 704-2649 Bidders Tendering Queries call (905) 704-2203

Page 75: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Catalogue No Colour ProductCategoric UseIdentifier

Categoric UseDescription

3M Canada - Traffic Safety SystemsDivision1840 Oxford St E PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

SCOTCHCAL 3483 Yellow/Orange PS Pressure Sensitive

SCOTCHCAL 3484 Red/Orange PS Pressure Sensitive

SCOTCHCAL 3485 Chartreuse PS Pressure Sensitive

General Construction List # 5.70.76Signing Page 1 of 1Sheeting, Vinyl, Fluorescent Date: 01-Feb-2011

SPECIFICATIONS: CGSB-62-GP-3MDRAWINGS:CUSTODIAL OFFICE : Maintenance - Operations - (905) 704-2649 Bidders Tendering Queries call (905) 704-2203

Page 76: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 77: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Notes: Plant Code = Manufacturer Plant Identification Code

Company Product Name Connection Type Standard No Plant CodeAll-Cast Concrete Temporary Concrete

BarrierI-Lock OPSD 911.140 ACC

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 ACC

Temporary Concretebarrier

Type T OPSD 911.180, OPSD 911.181 ACC

Temporary ConcreteBarrier

Type X MTOD 911.190, MTOD 911.191,MTOD 911.192

ACC

Anchor Concrete Products Ltd.1645 Sydenham Road, RR #8Kingston ON K7L 4V4CanadaTel: 613-546-6683Fax: 613-546-4540Toll Free: 1-800-223-0012Email: [email protected]: www.anchorconcrete.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 AK1

Armtec Mitchell51 Arthur Street S.Mitchell ON N0K 1N0CanadaTel: (519) 348-8465Fax: (519) 348-4223

Temporary ConcreteBarrier

Type T OPSD 911.180, OPSD 911.181 MIT

Temporary ConcreteBarrier

Type X MTOD 911.190, MTOD 911.191,MTOD 911.192

MIT

Belluz Concrete & Rentals Ltd.,138 - 6th Street EastFort Frances ON P9A 1W7CanadaTel: 807-274-9288Fax: 807-274-4322Email: [email protected]: www.belluzconcrete.com

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 BCR

Temporary ConcreteBarrier

Type X MTOD 911.190, MTOD 911.191,MTOD 911.192

BCR

Brooklin Concrete5598 Power RdOttawa ON K1G 3N4CanadaTel: 613-822-1488Fax: 613-822-2302Toll Free: 800-344-0151Email: [email protected]: www.armtec.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 BPC

Temporary ConcreteBarrier

Type T OPSD 911.180, OPSD 911.181 BPC

General Construction List # 5.80.25Traffic Barriers Page 1 of 5Temporary Concrete Barrier Date: 02-Oct-2017

SPECIFICATIONS: OPSS 1352, OPSS 741, SP 741S01, SP 741S02DRAWINGS: OPSD 0911.1400, OPSD 0911.1500, OPSD

0911.1510, OPSD 0911.1600, OPSD 0911.1610, OPSD0911.1800, OPSD 0911.1810, MTOD 911.190, MTOD911.191, MTOD 911.192, MTOD 911.610

CUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 78: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Connection Type Standard No Plant CodeCentral Precast Inc.25 Bongard AvenueNepean ON K2E 6V2CanadaTel: 613-225-9510Fax: 613-225-5318Web: www.centralprecast.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 CPN

Con Cast Pipe Inc.299 Brock Road South,Puslinch ON N0B 2J0CanadaTel: 519-763-8655Fax: 519-763-1982Toll Free: 800-668-7473Email: [email protected]: www.concastpipe.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 CCP

Temporary ConcreteBarrier

Type T OPSD 911.180 CCP

Co-Pipe Products Inc.20501 Goddard RoadTaylor MI 48180USATel: 734-287-1000Fax: 734-287-8132Toll Free: 800-521-3514Web: www.copipe.com

Temporary ConcreteBarrier

Type J OPSD 911.150 CPP

DECAST Ltd.8807 County Road 56Utopia ON L0M 1T0Tel: 705-734-2892Fax: 705-734-2920Toll free: 800-461-5632Web: www.decastltd.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 DECAST, or MCPbefore Jan 1/16

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 DECAST, or MCPbefore Jan 1/16

Temporary ConcreteBarrier

Type T OPSD 911.180, OPSD 911.181 DECAST, or MCPbefore Jan 1/16

Temporary ConcreteBarrier

Type X MTOD 911.190, MTOD 911.191,MTOD 911.192

DECAST

Facca Inc.2097 County Road 31, R.R. 1Ruscom Station ON N0R 1R0Tel: 519-975-0377Fax: 519-975-0427Toll Free: 800-538-4690Web: www.facca.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 FCI

Temporary ConcreteBarrier

Type T OPSD 911.180 FI

Temporary ConcreteBarrier

Type X MTOD 911.190, MTOD 911.191,MTOD 911.192

FI

General Construction List # 5.80.25Traffic Barriers Page 2 of 5Temporary Concrete Barrier Date: 02-Oct-2017

SPECIFICATIONS: OPSS 1352, OPSS 741, SP 741S01, SP 741S02DRAWINGS: OPSD 0911.1400, OPSD 0911.1500, OPSD

0911.1510, OPSD 0911.1600, OPSD 0911.1610, OPSD0911.1800, OPSD 0911.1810, MTOD 911.190, MTOD911.191, MTOD 911.192, MTOD 911.610

CUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 79: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Connection Type Standard No Plant CodeFisher Wavy Inc.P.O. Box 2000Copper Cliff ON P0M 1N0Tel: 705-674-4291Fax: 705-674-2847Toll Free: 1-800-504-9289Web: www.fisher-wavy.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 FWI

Hy-Grade Precast Concrete2411 First St, RR #1St. Catharines ON L2R 6P7CanadaTel: 905-684-8568Fax: 905-684-8560Toll Free: 1-800-229-8568Email: [email protected]: www.hygradeprecast.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 HP1

Temporary ConcreteBarrier

Type J OPSD 911.150, OPSD 911.151 HP1

Temporary ConcreteBarrier

Type T OPSD 911.180 HP1

McLean Taylor Construction Ltd.25 Water St N, PO Box 190St. Mary's ON N4X 1B1CanadaTel: 519-284-2580Fax: 519-284-3601Web:http://mcleantaylor.snappages.com/

Temporary ConcreteBarrier

I-Lock OPSD 911.140 MTC

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 MTC

M-Con Pipe & Products Inc.P.O. Box 1191, 2691 Greenfield RoadAyr ON N0B 1E0CanadaTel: 519-632-9112Fax: 519-632-7440Toll Free: 866-537-3338Email: [email protected]: www.mconproducts.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 MC2

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 MC2

Temporary ConcreteBarrier

Type T OPSD 911.180, OPSD 911.181 MC2

M-Con Products Inc.2150 Richardson Side RoadCarp ON K0A 1L0CanadaTel: 613-831-1736Fax: 613-831-2048Toll Free: 1-800-267-5515Email: [email protected]: www.mconproducts.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 MC1

General Construction List # 5.80.25Traffic Barriers Page 3 of 5Temporary Concrete Barrier Date: 02-Oct-2017

SPECIFICATIONS: OPSS 1352, OPSS 741, SP 741S01, SP 741S02DRAWINGS: OPSD 0911.1400, OPSD 0911.1500, OPSD

0911.1510, OPSD 0911.1600, OPSD 0911.1610, OPSD0911.1800, OPSD 0911.1810, MTOD 911.190, MTOD911.191, MTOD 911.192, MTOD 911.610

CUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 80: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Connection Type Standard No Plant CodeMiller Precast Ltd.58 Cooper RdRosslyn ON P7K 0E3Tel: 807-939-2655Fax: 807-939-1788Email: [email protected]: www.millerprecast.ca

Temporary ConcreteBarrier

I-Lock OPSD 911.140 MPT

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 MPT

Pedersen Construction Inc.P. O. Box 2409, Hwy. 11 & 65WNew Liskeard ON P0J 1P0Tel: 705-647-6223Fax: 705-647-8851Email:[email protected]:http://www.pedersenconstruction.ca/

Temporary ConcreteBarrier

I-Lock OPSD 911.140 PCL

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 PCL

Powell Contracting Limited180 Ram Forest RoadStouffville ON L4A 2G8Tel: 905-727-2518Fax: 905-727-1229Web: powellcontracting.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 PGC

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 PGC

Temporary ConcreteBarrier

Type T OPSD 911.180, OPSD 911.181 PGC

Temporary ConcreteBarrier

Type X MTOD 911.190, MTOD 911.191,MTOD 911.192

PGC

Distributor:QMB Barrier Systems Inc.4295 St-Elzear W.Laval Quebec H7P 4J3Tel: 450-978-1818Fax: 450-978-9340Web: www.qmb.caOntario Source:QMB Barriers Systems Inc.144 Freshway DriveVaughan ON L4K 1S5CanadaTel: 905-660-5521Fax: 905-660-6437Email: [email protected]

Movable TemporaryConcrete Barrier

QMB MTOD 911.610

Rainbow Concrete Industries Ltd.2477 Maley DriveSudbury ON P3A 4R7Tel: 705-566-1740Fax: 705-566-4813Toll free: 800-461-6281Web: www.rcil.ca

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 RCILS

General Construction List # 5.80.25Traffic Barriers Page 4 of 5Temporary Concrete Barrier Date: 02-Oct-2017

SPECIFICATIONS: OPSS 1352, OPSS 741, SP 741S01, SP 741S02DRAWINGS: OPSD 0911.1400, OPSD 0911.1500, OPSD

0911.1510, OPSD 0911.1600, OPSD 0911.1610, OPSD0911.1800, OPSD 0911.1810, MTOD 911.190, MTOD911.191, MTOD 911.192, MTOD 911.610

CUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 81: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Connection Type Standard No Plant CodeRainbow Concrete Industries Ltd.515 Birch's RoadNorth Bay ON P1B 8K8CanadaTel: 800-461-6281Fax: 705-472-6859Toll-free: 800-564-8788Web: www.rcil.ca

Temporary ConcreteBarrier

I-Lock OPSD 911.140 RCI

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 RCILN

Utility Structures Inc.61 Bongard AvenueOttawa ON K2E 6V2Tel: 613-225-6398Fax: 613-225-1681Toll Free: 800-267-6466Email: [email protected]: www.utilitystructures.com

Temporary ConcreteBarrier

I-Lock OPSD 911.140 USI

Temporary ConcreteBarrier

Type M OPSD 911.160, OPSD 911.161 USI

Temporary ConcreteBarrier

Type T OPSD 911.180, OPSD 911.181 USI

Temporary ConcreteBarrier

Type X MTOD 911.190, MTOD 911.191,MTOD 911.192

USI

Villeneuve Construction Co. Ltd.1533 Highway #11 West, P.O. Box1720Hearst ON P0L 1N0CanadaTel: 705-372-1838Fax: 705-372-1928Email: [email protected]: www.villeneuve.on.ca

Temporary ConcreteBarrier

I-Lock OPSD 911.140 VCH

General Construction List # 5.80.25Traffic Barriers Page 5 of 5Temporary Concrete Barrier Date: 02-Oct-2017

SPECIFICATIONS: OPSS 1352, OPSS 741, SP 741S01, SP 741S02DRAWINGS: OPSD 0911.1400, OPSD 0911.1500, OPSD

0911.1510, OPSD 0911.1600, OPSD 0911.1610, OPSD0911.1800, OPSD 0911.1810, MTOD 911.190, MTOD911.191, MTOD 911.192, MTOD 911.610

CUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 82: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 83: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Model Product CategoricUse Identifier

Categoric UseDescription

Flexstake Inc.2150 Andrea Lane, #CFt Myers FL 33912USATel: 239-481-3539Fax: 239-482-3539Toll free: 800-348-9839Web: www.flexstake.com

Canadian Source:MDM Durable Roadway Markings1362 Brands Crt, Suite 202Pickering ON L1V 2V4Tel: 905-839-8734Fax: 905-839-8352Email: [email protected]

Flexstake HD 600 Series 604 Ground mounteddelineator.

Flexible delineator stakedug into or driven into theground with a pounder.

Flexstake Surface MountSM 700 Series

704 Surface mounteddelineator.

Hard surface mounteddelineator post using lagbolts, bituminousadhesive, and/or epoxy.

Flexible tubular marker,TM 750 series

750 Surface or groundmounted delineator.

Delineator post offers 360degree visibility, in case ofbreakage post section iseasily replaced withoutdemounting.

Flexstake utility marker,UM 300 series

300 Ground mounteddelineator.

Flexstake utility marker isan economically priced,moderate impact, off-roadsign post or marker thatwas developed forunderground pipelines,cables, or other burieddevices.

New Direction Mfg., Inc.8912 North Fork DriveN. Fort Myers FL 33903Tel: 239.464.6591Fax: 239.599.4576Email: [email protected]: www.ndm-inc.com

FTGM Series 360 Flat Top Ground MountDelineator

FTSM Series 360 Flat Top Surface MountDelineator

TGM Series 360 Tubular Ground MountDelineator

TSM Series 360 Tubular Surface MountDelineator

Pexco, Davidson Traffic ControlProducts

Distributor:Stinson Equipment Ltd.130 Creditstone RoadConcord ON L4K 1P2CanadaTel: 905-669-2360Fax: 905-669-3537Email: [email protected]: www.stinson.ca

FG 300 UR FlexibleGuide Post

FG 300 UR Flexible Delineator/GuidePost

Posts are produced fromThermoplasticPolyurethane (Model UR)for outdoor weatherresistance with surfacemount delineator basesand locking pins to resistimpacts.

General Construction List # 5.85.18Traffic Guidance Page 1 of 2Delineator Posts, Flexible Date: 04-Apr-2017

SPECIFICATIONS: OPSS 550 (Withdrawn* Nov 2010), OPSS 2012 (Withdrawn* Nov 2014, incl in OPSS705), MUTCD (ON) (Replaced by Ontario Traffic Manual), P-C160

DRAWINGS: OPSD 0921.1010, OPSD 0923.3300 (Withdrawn* Nov2010)

CUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 84: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Model Product CategoricUse Identifier

Categoric UseDescription

Safe-Hit Corporation

Ontario Source:Lecol Inc.180 Ram Forest RoadGormley ON L0H 1G0CanadaTel: 416--694-4420Fax: 416-694-4523Toll Free: 877-532-6526Email: [email protected]: www.lecol.com

SAFE HIT Base Mounting orInstallation

Soil Anchor (Dug In orDriven in with a Pounder)and Surface Mount

General Construction List # 5.85.18Traffic Guidance Page 2 of 2Delineator Posts, Flexible Date: 04-Apr-2017

SPECIFICATIONS: OPSS 550 (Withdrawn* Nov 2010), OPSS 2012 (Withdrawn* Nov 2014, incl in OPSS705), MUTCD (ON) (Replaced by Ontario Traffic Manual), P-C160

DRAWINGS: OPSD 0921.1010, OPSD 0923.3300 (Withdrawn* Nov2010)

CUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 85: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Guide Rail System Product Name Embossed IdentificationCode

Distributor:Peninsula Construction Inc.2055 Kottmeier RdFonthill ON L0S 1E6caTel: 905-892-2661Fax: 905-892-4692Email: [email protected]: www.peninsula.ca

SBGR Artuk Flex Rail (FR) (10cm x 10cm) PCI FR YrMo

Distributor:Powell Contracting Limited180 Ram Forest RoadGormley ON L0H 1G0Tel: 905-727-2518Fax: 905-727-1229Web: powellcontracting.com

SBGR Pexco I-Flex Hinged Guide RailMount Reflector (10cm x 10cm)

PGDFYrMo

Distributor:Stinson Equipment Ltd.130 Creditstone RoadConcord ON L4K 1P2CanadaTel: 905-669-2360Fax: 905-669-3537Email: [email protected]: www.stinson.ca

SBGR Pexco I-Flex Hinged Guide RailMount Reflector (10cm x 10cm)

SEFEYrMo

General Construction List # 5.85.25Traffic Guidance Page 1 of 1Guide Rail Reflectors Date: 04-Apr-2017

SPECIFICATIONS: OPSS.PROV 721 (Formerly OPSS 552)DRAWINGS:CUSTODIAL OFFICE : Design and Contract Standards - (905) 704-2293

Page 86: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 87: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Colour Paint TypeEnnis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

40-4522 Black Organic Solvent

T-44-4524 Black Water-borne

General Construction List # 5.85.33Traffic Guidance Page 1 of 1Line Obliterating Paint, Pavement Markings, Temporary Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1712, OPSS 1716, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 88: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 89: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

Product Grade/ Type

Categoric Use Description Qualifications

A & A Asphalt Inc.Box 10Elginburg ON K0H 1M0CanadaTel: 613-542-9222Fax: 613-549-3875Email: [email protected]

Stow Stow WalkBehind RotaryGrinder

Rotary Grinder Rotary grinding with carbidecutters.

Tennant Tennant WalkBehind RotaryGrinder

Rotary Grinder Rotary grinding with carbidecutters.

EmpireSuperblast

SB-200 Compressed AirAbrasive Blasting

Pavement marking obliteration byEmpire Superblast Media Blasterusing soft abrasive blastingcalcium carbonate material.

ABCAS Group Inc. ABCAS Multicut2000

Multicut 2000 Mobile linegrinder

Self propelled highway lineremoval machine equipped withfloating diamond cutting headshydraulically controlled bysensors to follow the contour ofthe road.

Algoma Industrial Ltd.59 Yates AvenueSault Ste. Marie ON P6C 1G1Tel: 705-945-9388Fax: 705-945-6256Email: [email protected]: www.algomaindustrial.com

SchmidtAccustrip

SchmidtAccustrip Model11-P with #8Nozzle

Compressed AirAbrasive Blasting

Facadejet Blast Media

D. Vandenheede Enterprises Ltd.33 Riverside RdSimcoe ON N3Y 2N7Tel: 905-407-5329Fax: 519-428-5176Email: [email protected]: www.sodablast.ca

AccustripSystem

12sx, # 8 SprayNozzle

Compressed AirAbrasive Blasting

Dry Abrasive Blasting usingCalcium Carbonate Media.

Hi-Lite Canada ULC Soft AbrasiveBlasting

12SX MediaBlaster

Compressed AirAbrasive Blasting

Pavement marking obliterationusing soft abrasive blastingcalcium carbonate material.

NLB Starjet Ultra-Clean 40Stripe RemovalSystem

Mobile HighPressure WaterBlasting

Long line removal using ultrahigh pressure water (30,000 to40,000 psi) comprised of 16nozzles in a star patternstaggered 6 mm apart, frontmounted on a mobile unitcapable of speeds of 0-4.8 km/hrtowing a vacuum unit and truckmounted water supply.

General Construction List # 5.85.35Traffic Guidance Page 1 of 3Line Removal Systems, Pavement Markings Date: 01-Aug-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), SP 107S02, SP 710S03, SP 710S04DRAWINGS:CUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 90: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

Product Grade/ Type

Categoric Use Description Qualifications

Ontario Source:K.D.N Pavement Markings Ltd.,4925 7th Line, R.R.#4Rockwood ON N0B 2K0CanadaTel: 519-856-9236Fax: 519-856-1291

Edco Walk behind Rotary grinding with carbidecutters.

NLB Starjet Mobile highpressure waterblasting for longline removal

Long line removal using ultrahigh pressure water (30,000 to40,000 psi) comprised of 16nozzles in a star patternstaggered 6 mm apart, frontmounted on a mobile unitcapable of speeds of 0-4.8 km/hrtowing a vacuum unit and truckmounted water supply.

Kelso Blasting and Restoration575 Industrial Dr.Milton ON L9T 5E1Tel: 905-864-0378Fax: 905-864-7389Toll Free: 877-462-7639Email: [email protected]: www.kelsoindustrial.com

AccustripSystem

Spray Nozzle#8

Compressed airabrasive blasting

Dry Abrasive Blast Using ArmexProfile 2 Media or CalciumCarbonate Carbojet 15, or 30-50White.

System with Armexand cleaning byperformancenozzles

Lafrentz Road Services (1999) Ltd.1780 Ironstone DriveBurlington ON L7L 5V3Tel: 905-336-2404Fax: 905-336-8766Toll Free: 1-800-387-8999Email: [email protected]:http://www.lafrentzroadservices.ca/

Hofmann H92 Walk Behind Rotary Grinder

Metro Pavement Markings Ltd.69 Commerce Cres., Box #144Acton ON L7J 2M1CanadaTel: 519-853-3650Fax: 519-853-1036Toll Free: 1-800-563-6656Email: [email protected]

SchmidtAccustrip

Model 12-S Compressed AirAbrasive Blasting

Dry Abrasive Blast Using ArmexProfile 2 media or CalciumCarbonate Carbojet 15.

System with Armexand Cleaning byPerformanceNozzles

NLB Starjet Ultra-Clean 40Stripe RemovalSystem

Mobile HighPressure WaterBlasting

Long line removal using ultrahigh pressure water (30,000 to40,000 psi) comprised of 16nozzles in a star patternstaggered 6 mm apart, frontmounted on a mobile unitcapable of speeds of 0-4.8 km/hrtowing a vacuum unit and truckmounted water supply.

Midwestern Line-Striping Inc.P.O. Box 159Clarksburg ON N0H 1J0Tel: 519-599-2775Fax: 519-599-4578Toll Free: 888-288-1468Email: [email protected]

Edco TLR-7 Walk Behind Rotary grinding with carbidecutters.

AccustripSystem

12FX Compressed AirAbrasive Blasting

Dry Abrasive Blasting usingCarbojet 15 Calcium CarbonateMedia

System with Armexand Cleaning byPerfomanceNozzles

General Construction List # 5.85.35Traffic Guidance Page 2 of 3Line Removal Systems, Pavement Markings Date: 01-Aug-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), SP 107S02, SP 710S03, SP 710S04DRAWINGS:CUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 91: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

Product Grade/ Type

Categoric Use Description Qualifications

North-West Lines Ltd.1541 Rosslyn Rd.Thunder Bay ON P7E 6W2CanadaTel: 807-473-4573Fax: 807-475-5238

PM Eraser Walk Behind Line removal by rotary grinding.

Edco TLR-7 Walk Behind Rotary grinding with carbidecutters.

Schiebeci Polyplaner 300 Rotary grindermounted onhy-flow skid steer

12 carbide cutting teeth rotarygrinder.

Ontario Blasting Specialties Ltd.(The Soda Pro)2576 Dunwin Dr., Unit 5Mississauga ON L5L 5P6Tel: 905-593-0684Fax: 905-896-4032Email: [email protected]: www.sodapro.com

Line Removal,SchmidtAccustrip

Model 12-S Compressed AirAbrasive Blasting

Dry abrasive blasting usingcarbojet 15, 30-50 White, andfacadejet calcium carbonateproducts.

Total Traffic Services Inc.2685 Rena RoadMississauga ON L4T 1G6CanadaTel: 905-678-9779Fax: 905-678-9776Email: [email protected]

SchmidtAccustrip

Model 12-S Compressed AirAbrasive Blasting

Dry abrasive blast using ArmexProfile 2 media or CalciumCarbonate Carbojet 15.

T.T.S HighPressurePavementMarkingRemovalSystem withVacuum

Mobile HighPressure WaterBlasting

Mobile ultra high pressure water(40,000 psi) line removal systemcomprised of a spin jet nozzlecapable of removing markings ata rate of 15 to 25 metres/minute.Main unit is a GMC 8500 tilt cabtandem truck towing a vacuumsystem trailer.

Ontario Source:Upper Canada Road Services Inc.311 Amber Street, Suite 1Markham ON L3R 3J7CanadaTel: 866-906-8227Fax: 866-665-0336Email: [email protected]: www.ucrs.ca

Smith Walk behindrotary grinder

Rotary Grinder Rotary Grinder with CarbideCutters

Stripe Hog Truck mountedultra highpressuredwater removalsystem

Water BlastingSystem, 40,000PSI

Full vacuum recovery, 40,000 psiwaterblasting removal systemspecifically designed for optimalremoval of road and runwaymarkings

Waterblasting Technologies, Inc.(Regional)

Stripe HogWater Blastingand Smart Vacvacuumrecovery

Stripe Hog Mobile (truck ortractor mountedblasting head)High PressureWater Blasting

Full vacuum recovery, 40,000 psiwaterblasting removal systemspecifically designed for optimalremoval of road and runwaymarkings. For Ontario use, thenozzle head must include 16nozzle tips.

Ontario Source:Woodbine Pavement MarkingsLimited6476 Kingston RdToronto ON M1C 1L5CanadaTel: 416-281-9313Fax: 416-281-6528

NLB Starjet Ultra-Clean 40Stripe RemovalSystem

Mobile HighPressure WaterBlasting

Long line removal using ultrahigh pressure water (30,000 to40,000 psi) comprised of 16nozzles in a star patternstaggered 6 mm apart, frontmounted on a mobile unitcapable of speeds of 0-4.8 km/hrtowing a vacuum unit and truckmounted water supply.

General Construction List # 5.85.35Traffic Guidance Page 3 of 3Line Removal Systems, Pavement Markings Date: 01-Aug-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), SP 107S02, SP 710S03, SP 710S04DRAWINGS:CUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 92: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 93: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Model Name Product AttributeCanadian Source:Ennis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

Glass Beads, Ennis-Flint S100 -MTO OPSS 1750

Meets addition MTO requirements:Silane coated, min. 80% truespheres and max. heavy metalscontent (Arsenic 50 ppm, Lead 90ppm and Antimony 75 ppm)

Canadian Source:Enterfast106 Elm Ridge DrToronto ON M6B 1A8CanadaTel: 416-783-7629Web: http://www.manta.com/

Reflectofast 1750 Traffic GlassBeads

Meets addition MTO requirements:Silane coated, min. 80% truespheres and max. heavy metalscontent (Arsenic 50 ppm, Lead 90ppm and Antimony 75 ppm)

Opta Minerals Inc.PO Box 260, 407 Parkside DriveWaterdown ON L0R 2H0Tel: 905-689-6661Fax: 905-689-0485Toll Free: 1-888-689-6661Email: [email protected]: www.optaminerals.com

Britesphere (OPSS 1750) LiteGlass Beads

BriteSphere, Reflectorizing GlassBeads, Road Marking Beads

Meets addition MTO requirements:Silane coated, min. 80% truespheres and max. heavy metalscontent (Arsenic 50 ppm, Lead 90ppm and Antimony 75 ppm)

Ontario Source:PolyMight International21 Kenview Blvd.Brampton ON L6T 5G7CanadaTel: 647-947-8882Email:[email protected]: www.polymightinternational.com

Glass Beads, Swarco OPSS 1750 Meets addition MTO requirements:min. 80% true spheres and max.heavy metals content (Arsenic 50ppm, Lead 90 ppm and Antimony75 ppm)

Potters Canada1505 Industrielle StreetLaprairie QC J5R 2E4Tel: 450-659-9129Fax: 450-444-1640Toll Free: 1-877-444-9129Email:[email protected]: www.pottersbeads.com

Potters Industries LLCP.O. Box 840Valley Forge PA 19482-0840Tel: 610-651-4200Fax: 610-651-4463

Potters Glass Beads Meets addition MTO requirements:Silane coated, min. 80% truespheres and max. heavy metalscontent (Arsenic 50 ppm, Lead 90ppm and Antimony 75 ppm)

Potters Ontario 30/50 Dual CoatedGlass Beads

Potters (Ontario) Uncoated GlassBeads

Potters Ultra 1.9 Glass Beads

Potters Visilok Type 1 Glass Beads

General Construction List # 5.85.38Traffic Guidance Page 1 of 1Lines, Permanent, Glass Beads, Reflective Date: 04-Apr-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1750DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 94: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 95: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Colour Paint Type Notes / RemarksEnnis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

40-4605 Yellow Organic Unleaded

40-5165 Fluorescent Orange Organic Solvent

44-5120 White Water-Borne (Lead Free)Low Temp.

44-5121 Yellow Water-Borne (Lead Free)Low Temp.

610034 White Water-Borne

620024 Yellow Water-Borne

620025 Yellow Water-Borne

620026 Yellow Water-Borne

EF620034 Yellow Water-Borne

EF680001 Fluorescent Orange Water-Borne

EF680002 Fluorescent Orange Water-Borne

996402 White Water-Borne

EF610043 White Water- Borne

EF610044 White Water- Borne

EF620041 Yellow Water- Borne

Franklin Paint Company, Inc.259 Cottage StreetFranklin MA 02038USATel: 508-528-0303Fax: 508-528-8152Email: [email protected]: www.franklinpaint.com

Hydrophast Plus 5000 White Water Borne Can be applied down to2C

Hydrophast Plus 5100 Yellow Water Borne Can be applied down to2C

General Construction List # 5.85.40Traffic Guidance Page 1 of 2Lines, Permanent, Paint, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1712, OPSS 1716, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 96: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Colour Paint Type Notes / RemarksPolyMight International21 Kenview Blvd.Brampton ON L6T 5G7CanadaTel: 647-947-8882Email:[email protected]: www.polymightinternational.com

10-3105 Black Water-Borne

10-3111 Orange Water-Borne

10-3114 White Water-Borne

10-3200 White Water-Borne

10-3201 Yellow Water-Borne

10-3300 White Water-Borne

10-3301 Yellow Water-Borne

11-5111 Orange Organic Solvent Based

11-5102 White Organic Solvent Based

11-5101 Yellow Organic Solvent Based

11-5103 Yellow Organic Solvent Based

10-3202 White Waterborne

10-3406 White Waterborne

10-3408 White Waterborne

10-3203 Yellow Waterborne

PolyMight International21 Kenview Blvd.Brampton ON L6T 5G7CanadaTel: 647-947-8882Email:[email protected]: www.polymightinternational.com

11-5100 White Organic Solvent Based

The Sherwin-Williams Company170 Brunel RoadMississauga ON L4Z 1T5Tel: 905-507-0166Fax: 905-507-4198Toll free: 800-510-5991Web: www.sherwin.com

HD21A - WaterborneLatex Line Marking

White Water Borne

HD21A - WaterborneLatex Line Marking

Yellow (Lead Free) Water Borne

15W09 White Organic Solvent Based

15W04 White Waterborne

15Y04 Yellow Water borne

General Construction List # 5.85.40Traffic Guidance Page 2 of 2Lines, Permanent, Paint, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1712, OPSS 1716, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 97: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

Ennis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

T-46-600A&B (C)

T-46-600A&B (C)

Spray MethylMethacrylate(MMA)

White Surface Formed-In-Place

Designed for use onasphalt and concrete.

T-46-601A&B (C)

T-46-601A&B (C)

Spray MethylMethacrylate(MMA) LeadFree

Yellow Surface Formed-In-Place

Designed for use onasphalt and concrete.

T-46-603A&B (C)

T-46-603A&B (C)

Spray MethylMethacrylate(MMA)

FlourescentOrange

SurfaceApplication

Formed-In-Place

Must use Swarco 3131beads with T13 coatingand ranging in size from300 - 1000 microns.Suitable for temporaryapplications by sprayequipment on asphaltand concrete surfaces.

T-46-605A&B (C)

T-46-605A&B (C)

Spray MethylMethacrylate(MMA)

Black Surface Formed-In-Place

Designed for contrastbase application withwhite or yellow MMA onconcrete surfaces.

Ennis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

LDA 98-2000 Epoxy Yellow Surface Formed-In-Place

Acceptable for use aslines, symbols andlegends.

LDA 98-2001 Epoxy White Surface Formed-In-Place

Acceptable for use aslines, symbols andlegends.

General Construction List # 5.85.43Traffic Guidance Page 1 of 4Lines, Permanent, Polymeric Spray, Pavement Markings Date: 01-Feb-2018

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1714, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 98: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

Epoplex, Division of Stonhard Inc.1000 E Park AveMaple Shade NJ 08052United StatesTel: (856) 779-7500Email: [email protected]: http://www.epoplex.com/

EpoplexLS50

LS50 Epoxy White SurfaceApplication

Formed-In-Place

Acceptable for Use asLines, Symbols andLegends

EpoplexLS50

LS50 Epoxy Yellow SurfaceApplication

Formed-In-Place

Acceptable for Use asLines, Symbols andLegends

EpoplexLS50 LF

LS50 LF Epoxy Yellow Surface orInlay

Formed-In-Place

Used with Std glassbeads

EpoplexLS50 LF

LS50 LF Epoxy Yellow Surface orInlay

Formed-In-Place

Used with Visimax beads

EpoplexLS50Orange

LS50Orange

Epoxy Orange Surface Formed-In-Place

Used with Std glassbeads

EpoplexLS50 White

LS50 White Epoxy White Surface orInlay

Formed-In-Place

Used with Std. glassbeads

EpoplexLS50 White

LS50 White Epoxy White Surface orInlay

Formed-In-Place

Used with Visimax beads

General Construction List # 5.85.43Traffic Guidance Page 2 of 4Lines, Permanent, Polymeric Spray, Pavement Markings Date: 01-Feb-2018

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1714, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 99: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

PolyMight International21 Kenview Blvd.Brampton ON L6T 5G7CanadaTel: 647-947-8882Email:[email protected]: www.polymightinternational.com

PMI Stripe 20-8202A&B (C)

Spray MethylMethacrylate(MMA)

White Surfaceand Inlay

Formed-In-Place

Suitable for symbols,legends and long lines.Must use Swarco brandglass beads (Spray MMABeads).

20-8205 20-8205A&B (C)

Spray MethylMethacrylate(MMA)

Black Surface Formed-In-Place

PMI Stripe 20-8211A&B (C)

Spray MethylMethacrylate(MMA)

FluorescentOrange

Surfaceand Inlay

Formed-In-Place

Suitable for symbols,legends and long lines.Must use Swarco brandglass beads (Spray MMABeads).

20-8220 20-8220A&B (C)

Spray MethylMethacrylate(MMA)

White Surface Formed-In-Place

Requires the use ofSwarco 3131 Beads.

20-8221 20-8221A&B (C)

Spray MethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Requires the use ofSwarco 3131 Beads.

20-8225 20-8225A&B (C)

Spray MethylMethacrylate(MMA)

Black Surface Formed-In-Place

20-8231 20-8231A&B (C)

Spray MethylMethacrylate(MMA)

FluorescentOrange

Surface Formed-In-Place

Requires the use ofSwarco 3131 Beads.

20-8240 20-8240 Spray MethylMethacrylate

White Surface Formed-In-Place

Suitable for symbols,legends and long lines.Must use Swarco 3131glass beads

20-8241 20-8241 Spray MethylMethacrylate

Yellow Surface Formed-In-Place

Suitable for symbols,legends and long lines.Must use Swarco 3131glass beads

20-8247 20-8247 Spray MethylMethacrylate

FluorescentOrange

Surface Formed-In-Place

Suitable for symbols,legends and long lines.Must use Swarco 3131glass beads

20-8245 20-8245 Spray MethylMethacrylate

Black Surface Formed-In-Place

Methacrylate (blackcontrast) markingssuitable for application asa base with white oryellow lines by spraymethacrylate equipmenton concrete surfaces.

General Construction List # 5.85.43Traffic Guidance Page 3 of 4Lines, Permanent, Polymeric Spray, Pavement Markings Date: 01-Feb-2018

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1714, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 100: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

Road Services International Ltd.381 Pomona Ave.Burlington ON L7N 1T6Tel: 905-637-0413Fax: 905-637-1053Web: http://roadservicesintl.com/

PermamarkSpray

PermamarkSpray 2200A/B

Spray MethylMethacrylate(MMA)

White SurfaceApplication

Formed-In-Place

Designed for sprayapplication at 625 to 700um, for use on asphaltand concrete.

PermamarkSpray

PermamarkSpray 2201A/B

Spray MethylMethacrylate(MMA)

Yellow SurfaceApplication

Formed-In-Place

Designed for sprayapplication at 625 to 700um, for use on asphaltand concrete.

PermamarkSpray

PermamarkSpray 2202A/B

Spray MethylMethacrylate(MMA)

FluorescentOrange

SurfaceApplication

Formed-In-Place

Must use SwarcoMegalux beads at a dryfilm thickness of 500 um,and is suitable fortemporary applicationsby spray equipment onasphalt and concretesurfaces.

PermamarkSpray

PermamarkSpray 2203A/B

Spray MethylMethacrylate

Black Surface &InlayApplication

Formed-In-Place

Methacrylate (blackcontrast) markingssuitable for application asa base with white oryellow lines by spraymethacrylate equipmenton concrete surfaces.

General Construction List # 5.85.43Traffic Guidance Page 4 of 4Lines, Permanent, Polymeric Spray, Pavement Markings Date: 01-Feb-2018

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1714, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 101: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

Preformed orFormed-in-Place

ProductNotes

StandardNo

Ennis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

PreMark PreMark Thermoplastic White(othersavailable)

Surface andInlayApplications

Preformed Highperformanceline markings,custompatterns, etc.which arereflective andoilimpervious.No preheat ofthe surface toa specifictemperatureneeded toinstall.

General Construction List # 5.85.44Traffic Guidance Page 1 of 1Lines, Permanent, Two Year Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1716, SP 107S01, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 102: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 103: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

Ontario Source:3M Canada - Traffic Safety andSecurity Systems Division300 Tartan Drive PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

STAMARK 270ES PreformedPlastic Tape

White Surface &InlayApplication

Preformed Acceptable for use asLines

STAMARK 271ES PreformedPlastic Tape

Yellow Surface &InlayApplication

Preformed Acceptable for use asLines

STAMARK A380 IES PreformedPlastic Tape

White Surface &InlayApplication

Preformed Acceptable for use asLines

STAMARK A381 IES PreformedPlastic Tape

Yellow Surface &InlayApplication

Preformed Acceptable for use asLines

Straight SMS-2901 PreformedPlastic Tape

White Surface &InlayApplication

Acceptable for use asSymbol & Legend

Left SMS-2902L PreformedPlastic Tape

White Surface &InlayApplication

Acceptable for use asSymbol & Legend

Right SMS-2902R PreformedPlastic Tape

White Surface &InlayApplication

Acceptable for use asSymbol & Legend

All WeatherThermoplastic

3M All WeatherThermoplastic

Thermoplastic White Inlay only Formed-in-Place

A pavement markingsystem consisting of ahigh performancegranular alkydthermoplastic and 3MTMbonded core elements.

All WeatherThermoplastic

3M All WeatherThermoplastic

Thermoplastic Yellow Inlay only Formed-in-Place

A pavement markingsystem consisting of ahigh performancegranular alkydthermoplastic and 3MTMbonded core elements.

Astrographic Industries Ltd.17855 - 66th AvenueSurrey BC V3S 7X1CanadaTel: 604-596-1731Fax: 604-596-1211Toll Free: 1-800-663-6551Email:[email protected]: www.astrographic.com

Rainline Rainline StructuredThermoplastic

White andyellow

Inlay Formed-In-Place

Wet weather markingsacceptable for long lineapplications (gore areas,off-ramps)

General Construction List # 5.85.45Traffic Guidance Page 1 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 104: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

Ennis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

T-46-6002 T-46-6002 ExtrudedMethylMethacrylate(MMA)

White Surface &InlayApplication

Formed-in-Place

Acceptable for Use asLines, Symbols andLegends

T-46-6003 T-46-6003 ExtrudedMethylMethacrylate(MMA) LeadFree

Yellow Surface &InlayApplication

Formed-in-Place

Acceptable for Use asLines, Symbols andLegends

EF310001 EF310001 ExtrudedMethylMethacrylate(MMA)

White Surface &InlayApplications

Formed-In-Place

EF-31-0002 EF-31-0002 ExtrudedMethylMethacrylate(MMA)

White SurfaceApplication

Formed-in-Place

Acceptable for Use asLines, Symbols andLegends

EF310003 EF310003 TexturedMethylMethacrylate(MMA)

White Surface &InlayApplications

Formed-In-Place

Structured web patternMMA cold plastic suitablefor lines by agglomerateapplication equipment onasphalt and concrete.

EF310007 EF310007 ExtrudedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads

EF310008 EF310008 TexturedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads

EF320003 EF320003 TexturedMethylMethacrylate(MMA)

Yellow Surface &InlayApplications

Formed-In-Place

Structured web patternMMA cold plastic suitablefor lines by agglomerateapplication equipment onasphalt and concrete

EF320007 EF320007 ExtrudedMethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads

EF320008 EF320008 TexturedMethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

General Construction List # 5.85.45Traffic Guidance Page 2 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 105: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

Ennis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

EF910001 EF910001 FieldReactedPolymeric (2component)

White Surface &InlayApplications

Formed-In-Place

Wet-nightStructuredMMA(HPS-7)

996900FO TexturedMethylMethacrylate(MMA)

FluorescentOrange

Surface &InlayApplication

Formed-in-Place

Application of structuredmarking must useSwarco 3132 beads withT13 coating and rangingin size from 300 - 590microns. Structured webpattern MMA suitable forConstruction Zones byagglomerate applicationequipment on asphaltand concrete.

Wet-nightStructuredMMA(HPS-7)

996900W TexturedMethylMethacrylate(MMA)

White Surface &InlayApplication

Formed-in-Place

Structured web patternMMA cold plastic suitablefor lines by agglomerateapplication equipment onasphalt and concrete.

Wet-nightStructuredMMA(HPS-7)

996900Y TexturedMethylMethacrylate(MMA)

Yellow(Federal)

Surface &InlayApplication

Formed-in-Place

Structured web patternMMA cold plastic suitablefor lines by agglomerateapplication equipment onasphalt and concrete.

General Construction List # 5.85.45Traffic Guidance Page 3 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 106: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

Ennis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

Alkyd W4E-5GX-EX(884129)

Thermoplastic White,Granular

Surface &InlayApplications

Formed-in-Place

Acceptable for Use asLines, Symbols andLegends

Alkyd W4E-5BX-EX(884265)

Thermoplastic White,Block

Surface &InlayApplications

Formed-In-Place

Acceptable for Use asLines, Symbols andLegends

Alkyd W4E-5GX-EX(884285)

Thermoplastic White,Granular

Surface &InlayApplication

Formed-in-Place

Acceptable for use aslines, symbols andlegends.

Alkyd Y1E-5GX-ONT(887001)

Thermoplastic Yellow,Granular(Lead Free)

Surface &InlayApplication

Formed-in-Place

Acceptable for use aslines, symbols andlegends.

Alkyd, HighPerformance

Y1E-5GX-ONHP(887002)

Thermoplastic Yellow,Granular(Lead Free)

Surface &InlayApplication

Formed-in-Place

Acceptable for use aslines, symbols andlegends.

Hydrocarbon W4E-4GX-EX(884255)

Thermoplastic White,Granular

Surface &InlayApplications

Formed-in-Place

Acceptable for Use asLines, Symbols andLegends

Hydrocarbon Y1E-4GX-ONT(887000)

Thermoplastic Yellow,Granular(Lead Free)

Surface &InlayApplication

Formed-in-Place

Acceptable for use aslines, symbols andlegends.

PreMark PreMark Thermoplastic White(othersavailable)

Surfaceand InlayApplications

Preformed Available in differentwidths and patterns

Franklin Paint Company, Inc.259 Cottage StreetFranklin MA 02038USATel: 508-528-0303Fax: 508-528-8152Email: [email protected]: www.franklinpaint.com

MMA 98-2 MMA 98-2 TexturedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Requires the use ofPotters Ultra 1.9 Beads.

General Construction List # 5.85.45Traffic Guidance Page 4 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 107: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

Lafrentz Road Services (1999)Ltd.1780 Ironstone DriveBurlington ON L7L 5V3Tel: 905-336-2404Fax: 905-336-8766Toll Free: 1-800-387-8999Email: [email protected]

302 Series 381 Thermoplastic White Surface &InlayApplication

Formed-in-Place

Acceptable for use asLine, Symbols andLegends

303 Series 382 Thermoplastic Yellow Surface &InlayApplication

Formed-In-Place

Acceptable for use asLine, Symbols andLegends

System 400 415 FieldReactedPolymeric (2Component)Extruded

White Surface &InlayApplication

Formed-In-Place

Acceptable for use asLine, Symbols andLegends

System 401 409 FieldReactedPolymeric (2Component)Extruded

Yellow Surface &InlayApplication

Formed-In-Place

Acceptable for use asLine, Symbols andLegends

General Construction List # 5.85.45Traffic Guidance Page 5 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 108: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

PolyMight International21 Kenview Blvd.Brampton ON L6T 5G7CanadaTel: 647-947-8882Email:[email protected]:www.polymightinternational.com

PMI Stripe 20-8101 ExtrudedMethylMethacrylate(MMA)

Yellow Surface &Inlay

Formed-In-Place

Extruded MMA, fieldreacted, multi-componentcold plastic, long-termdurability. Suitable forsymbols, legends andlong lines. Must useSwarco brand glassbeads (3132 Beads).

PMI Stripe 20-8102 ExtrudedMethylMethacrylate(MMA)

White Surface &Inlay

Formed-In-Place

Extruded MMA, fieldreacted, multi-componentcold plastic, long-termdurability. Suitable forsymbols, legends andlong lines (flat or profile).Must use Swarco brandglass beads (3132Beads).

PMI Stripe 20-8103 ExtrudedMethylMethacrylate(MMA)

Yellow Surface &Inlay

Formed-In-Place

Extruded MMA, fieldreacted, multi-componentcold plastic, long-termdurability. Suitable forsymbols, legends andlong lines (flat or profile).Must use Swarco brandglass beads (3132Beads).

PMI Stripe 20-8120 ExtrudedMethylMethacrylate(MMA)

White Surface &Inlay

Fromed-In-Place

Extruded MMA, fieldreacted, multi-componentcold plastic, long-termdurability. Suitable forsymbols, legends andlong lines (flat or profile).Must use Swarco brandglass beads (3131 or3132 Beads).

PMI Stripe 20-8121 ExtrudedMethylMethacrylate(MMA)

Yellow Surface &Inlay

Formed-In-Place

Extruded MMA, fieldreacted, multi-componentcold plastic, long-termdurability. Suitable forsymbols, legends andlong lines (flat or profile).Must use Swarco brandglass beads (3131 or3132 Beads).

General Construction List # 5.85.45Traffic Guidance Page 6 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 109: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

PolyMight International21 Kenview Blvd.Brampton ON L6T 5G7CanadaTel: 647-947-8882Email:[email protected]:www.polymightinternational.com

20-8150 20-8150 ExtrudedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8151 20-8151 ExtrudedMethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8152 20-8152 ExtrudedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8153 20-8153 ExtrudedMethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8158 20-8158 ExtrudedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8159 20-8159 ExtrudedMethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8165 20-8165 ExtrudedMethylMethacrylate(MMA)

Black Surface Formed-In-Place

Conditionally approved

20-8160 20-8160 ExtrudedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Conditionally approved;requires the use ofSwarco 3132 bead

20-8168 20-8168 ExtrudedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Conditionally approved;requires the use ofSwarco 3132 bead

20-8161 20-8161 ExtrudedMethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Conditionally approved;requires the use ofSwarco 3132 bead

General Construction List # 5.85.45Traffic Guidance Page 7 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 110: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

PolyMight International21 Kenview Blvd.Brampton ON L6T 5G7CanadaTel: 647-947-8882Email:[email protected]:www.polymightinternational.com

20-8169 20-8169 ExtrudedMethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Conditionally approved;requires the use ofSwarco 3132 bead

PolyMight International21 Kenview Blvd.Brampton ON L6T 5G7CanadaTel: 647-947-8882Email:[email protected]:www.polymightinternational.com

PMI Stripe 20-8300 TexturedMethylMethacrylate(MMA)

White Surface &Inlay

Formed-In-Place

Textured MMA,agglomerate structureprovides excellentwet-night visibility.Suitable for symbols andlegends, and long lineapplications. Must useSwarco extruded orspray MMA Beads.

PMI Stripe 20-8301 TexturedMethylMethacrylate(MMA)

Yellow Surface &Inlay

Formed-In-Place

Textured MMA,agglomerate structureprovides excellentwet-night visibility.Suitable for symbols andlegends, and long lineapplications. Must useSwarco extruded orspray MMA Beads.

PMI Stripe 20-8303 TexturedMethylMethacrylate(MMA)

Yellow Surface &Inlay

Formed-In-Place

Textured MMA,agglomerate structureprovides excellentwet-night visibility.Suitable for symbols andlegends, and long lineapplications. Must useSwarco extruded orspray MMA Beads.

PMI Stripe 20-8311 TexturedMethylMethacrylate(MMA)

FluorescentOrange

Surface &Inlay

Formed-In-Place

Textured MMA,agglomerate structureprovides excellentwet-night visibility.Suitable for symbols andlegends, and long lineapplications. Must useSwarco extruded orspray MMA Beads.

General Construction List # 5.85.45Traffic Guidance Page 8 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 111: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

PolyMight International21 Kenview Blvd.Brampton ON L6T 5G7CanadaTel: 647-947-8882Email:[email protected]:www.polymightinternational.com

PMI Stripe 20-8320 TexturedMethylMethacrylate(MMA)

White Surface &Inlay

Formed-In-Place

Textured MMA,agglomerate structureprovides excellentwet-night visibility.Suitable for symbols andlegends, and long lineapplications. Must useSwarco extruded orspray MMA Beads.

PMI Stripe 20-8321 TexturedMethylMethacrylate(MMA)

Yellow Surface &Inlay

Formed-In-Place

Textured MMA,agglomerate structureprovides excellentwet-night visibility.Suitable for symbols andlegends, and long lineapplications. Must useSwarco extruded orspray MMA Beads.

PMI Stripe 20-8323 TexturedMethylMethacrylate(MMA)

Yellow Surface &Inlay

Formed-In-Place

Textured MMA,agglomerate structureprovides excellentwet-night visibility.Suitable for symbols andlegends, and long lineapplications. Must useSwarco extruded orspray MMA Beads.

20-8331 20-8331 TexturedMethylMethacrylate(MMA)

Orange Surface Formed-In-Place

Requires the use ofSwarco Spray MMABeads.

General Construction List # 5.85.45Traffic Guidance Page 9 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 112: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

PolyMight International21 Kenview Blvd.Brampton ON L6T 5G7CanadaTel: 647-947-8882Email:[email protected]:www.polymightinternational.com

20-8350 20-8350 TexturedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8351 20-8351 TexturedMethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8352 20-8352 TexturedMethylMethacrylate(MMA)

White Surface Formed-in-Place

Requires the use ofSwarco 3132 Beads.

20-8353 20-8353 TexturedMethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8358 20-8358 TexturedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8359 20-8359 TexturedMethylMethacrylate(MMA)

Yellow Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads.

20-8360 20-8360 TexturedMethylMethacrylateMMA

White Surface FormedIn-Place

Requires the use ofSwarco 3132 Beads

20-8361 20-8361 TexturedMethylMethacrylateMMA

Yellow Surface FormedIn-Place

Requires the use ofSwarco 3132 Beads

20-8363 20-8363 TexturedMethylMethacrylateMMA

Yellow Surface FormedIn-Place

Requires the use ofSwarco 3132 Beads

20-8367 20-8367 TexturedMethylMethacrylateMMA

FluorescentOrange

Surface Formed-In-Place

Requires the use ofSwarco 3132 Beads

General Construction List # 5.85.45Traffic Guidance Page 10 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 113: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

Road Services International Ltd.381 Pomona Ave.Burlington ON L7N 1T6Tel: 905-637-0413Fax: 905-637-1053Web: http://roadservicesintl.com/

PermamarkExtrude

PermamarkExtrude 2100

FieldReactedPolymeric (2Component)Extruded

White Surface &InlayApplication

Formed-In-Place

Acceptable for use asLine, Symbols andLegends

PermamarkExtrude

PermamarkExtrude 2101

FieldReactedPolymeric (2Component)Extruded

Yellow(Lead Free)

Surface &InlayApplication

Formed-In-Place

Acceptable for use asLine, Symbols andLegends

PermamarkAgglomerate

PermamarkAgglomerate2300

FieldReactedPolymeric (2component)

White Surface &InlayApplication

Formed-In-Place

Structured web patternMMA markings allowingfor the dispersal ofrainwater and exposingthe glass beads toenhance retroreflectivity.Suitable for lines byagglomerate applicationequipment on asphaltand concrete surfaces.

PermamarkAgglomerate

PermamarkAgglomerate2301

FieldReactedPolymeric (2component)

Yellow(Lead Free)

Surface &InlayApplication

Formed-In-Place

Structured web patternMMA markings allowingfor the dispersal ofrainwater and exposingthe glass beads toenhance retroreflectivity.Suitable for lines byagglomerate applicationequipment on asphaltand concrete surfaces.

PermamarkExtrude

PermamarkExtrude 2103

FieldReactedPolymeric (2component)

Black Surface &InlayApplication

Formed-In-Place

Permanent (blackcontrast) markingssuitable for application asa base with white oryellow lines by screedbox and hand extrusionequipment on concretesurfaces.

PermamarkAgglomerate

PermamarkAgglomerate2302

FieldReactedPolymeric (2component)

FluorescentOrange

Surface &InlayApplication

Formed-In-Place

Structured web patternMMA markings. Suitablefor lines on asphalt andconcrete surfaces (forconstruction detourstaging only).

General Construction List # 5.85.45Traffic Guidance Page 11 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 114: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductName

ProductModel

MarkingType

Colour Surface orInlay

PreformedorFormed-In-Place

Product Notes

The Sherwin-Williams Company170 Brunel RoadMississauga ON L4Z 1T5Tel: 905-507-0166Fax: 905-507-4198Toll free: 800-510-5991Web: www.sherwin.com

SMARTMARKHydrocarbon

W2S90 Thermoplastic White Surface &InlayApplication

Formed-In-Place

Acceptable for use aslines, symbols andlegends.

MTO14W08 MTO14W08 ExtrudedMethylMethacrylate(MMA)

White Surface Formed-In-Place

Requires the use ofUTAH blend glass beads

MTO14W14 MTO14W14 Thermoplastic White Surface Formed-In-Place

Requires the use ofUTAH blend glass beads

General Construction List # 5.85.45Traffic Guidance Page 12 of 12Lines, Permanent, Durable, Pavement Markings Date: 01-Jun-2017

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1713, OPSS 1714, OPSS 1715, SP 107S02DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 115: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Marking Type Colour Class UsesOntario Source:3M Canada - Traffic Safety andSecurity Systems Division300 Tartan Drive PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

Stamark 715 Preformed,patterned, skidresistant tape

Black Class D -Removable (Detour)

Black removablemask series 710,model 715, can beused to obliterateexisting pavementmarking fortemporary trafficdiversion, such ashighwayconstruction workzones.

Stamark 710 Preformed,patterned, skidresistant tape

White Class D -Removable (Detour)

Highly retroreflectiveunder both wet anddry conditions.Intended forlongitudinal lineapplications inhighway work zoneswhere removabilityis required.Designed to performfor the duration ofthe constructionseason.

Stamark 711 Preformed,patterned, skidresistant tape

Yellow Class D -Removable (Detour)

Highly retroreflectiveunder both wet anddry conditions.Intended forlongitudinal lineapplications inhighway work zoneswhere removabilityis required.Designed to performfor the duration ofthe constructionseason.

Advance Traffic Markings ATM Series 200 Preformed PlasticPolymer Tape

White Class R -Removable (Detourand Construction)

Edge CentreLine/Legend andSymbolsApplications

ATM Series 200 Preformed PlasticPolymer Tape

Yellow Class R -Removable (Detourand Construction)

Edge CentreLine/Legend andSymbolsApplications

HIDE-A-LINE Preformed PlasticPolymer Tape

Black

General Construction List # 5.85.50Traffic Guidance Page 1 of 2Lines, Temporary, Tape, Pavement Markings Date: 04-Aug-2015

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1715, SP 107S01, SP 107S02DRAWINGS:CUSTODIAL OFFICE : Maintenance and Operations - (905) 704-2200

Page 116: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Marking Type Colour Class UsesBrite-Line Technologies Inc.10660 E. 51 st Ave.Denver CO 80239USATel: 888-201-6448Fax: 888-208-0758Office: 303-375-1293Email: [email protected]: www.brite-line.com

Ontario Source:Stinson Equipment Ltd.130 Creditstone RoadConcord ON L4K 1P2CanadaTel: 905-669-2360Fax: 905-669-3537Email: [email protected]: www.stinson.ca

Series 100 Preformed PlasticPolymer Tape

White Class D -Removable (Detour)

Edge Centre Line

Series 100 Preformed PlasticPolymer Tape

Yellow Class D -Removable (Detour)

Edge Centre Line

DELTA-LINE Preformed PlasticPolymer Tape

Black

Deltaline PreformedPatterned PlasticPolymer Tape

White, yellow andfluorescent orange.

Class D -Removable (Detour)

A patentedretroreflectivepavement markingtape that utilizes aunique ridgedpattern and hybridceramicmicrospheres toguarantee bright,safer lane markingsin both wet and dryconditions.

Flex-O-Lite Ltd (Plant) FLEX-O-LINE Preformed PlasticFoil Back Tape

White Class C -Non-Removable(Construction)

Edge Centre Line

FLEX-O-LINE Preformed PlasticFoil Back Tape

Yellow Class C -Non-Removable(Construction)

Edge Centre Line

General Construction List # 5.85.50Traffic Guidance Page 2 of 2Lines, Temporary, Tape, Pavement Markings Date: 04-Aug-2015

SPECIFICATIONS: OPSS 710 (Formerly OPSS 532), OPSS 1715, SP 107S01, SP 107S02DRAWINGS:CUSTODIAL OFFICE : Maintenance and Operations - (905) 704-2200

Page 117: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Categoric UseAstra International of Canada45A Racine RoadToronto ON M9W 2Z4CanadaTel: 647-362-9624Fax: 416-747-9940Email: [email protected]: www.astracanada.ca

Snow Lite 300 2 Way Plowable

Ennis-Flint (Corporate Office)115 Todd CourtThomasville NC 27360United StatesTel: 336-475-6600Web: www.ennisflint.com

Ontario Source:Ennis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

Stimsonite LifeLite 101 2 Way Plowable Low Profile

General Construction List # 5.85.55Traffic Guidance Page 1 of 1Markers, Pavement, Raised, Permanent Date: 04-Apr-2017

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 118: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 119: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Categoric Use3M Canada - Traffic Safety andSecurity Systems Division300 Tartan Drive PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

Ontario Source:Astra International of Canada45A Racine RoadToronto ON M9W 2Z4CanadaTel: 647-362-9624Fax: 416-747-9940Email: [email protected]: www.astracanada.ca

Series 290 Recessed

Ennis-Flint (Pickering Plant)850 McKay RoadPickering ON L1W 2Y4Tel: 1-800-331-8118Fax: 905-686-1954Web: www.ennisflint.com

Model C80 Recessed

General Construction List # 5.85.56Traffic Guidance Page 1 of 1Markers, Pavement, Recessed, Permanent Date: 04-Apr-2017

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 120: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 121: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Catalogue No Product Grade / TypeDeca Cables Inc.150 North Murray Street P.O. Box 777Trenton ON K8V 5W6CanadaTel: 613-392-3585Fax: 613-392-7908Toll free: 800-263-3322Email: [email protected]: www.decacables.com

70-914 (19 Strand) Wire Type B - 2 Cable, #14 AWG, In Shielded Core

70-814 (19 Strand) Wire Type A - 4 Cable, #18 AWG, In Shielded Core

UWC/DE 50-2 18.4C Wire Type A - 4 Cable, #18 AWG, In Shielded Core

Domtech Inc.40 East Davis StTrenton ON K8V 6S4CanadaTel: 613-394-4884Fax: 613-394-5372Toll Free: 888-278-8258Email: [email protected]: http://domtech.net/

Ontario Source:Impulse Technologies Ltd.

82461 Wire Type B - 2 Cable, #14 AWG, In Shielded Core

21441S Wire Type B - 2 Cable, #14 AWG, In Shielded Core

Global Traffic Technologies Canada,Inc.157 Adelaide Street West, Suite 448Toronto ON M5H 4E7Tel: (800) 258-4610Email: [email protected]: www.gtt.com

Canoga 30003 Shielded cable 4 conductor #18 AWG

Electrical List # 6.05.06Cable and Associated Hardware Page 1 of 1Cable, Extra Low Voltage, Loop Detector Lead-in Type Date: 01-Feb-2018

SPECIFICATIONS: OPSS 604, OPSS 2410DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 122: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 123: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalCable and Associated HardwareCable, Interconnection

DSM # 6.05.12Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 2406, OPSS 604DRAWINGS:CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Identity Catalogue No Product Grade / TypeStandard A - 6 Pair #16 AWG, In Shielded Core - IMSA 19-21984 for Aerial UseStandard B - 6 Pair #16 AWG, In Shielded Core - IMSA 20-21984 for Aerial UseStandard C - 6 Pair #16 AWG, In Shielded Core - IMSA 19-61984 for In Ground Use

Deca Cables Inc.150 North Murray StreetP.O. Box 777Trenton ON K8V 5W6Tel: 613-392-3585Fax: 613-392-7908Toll free: 800-263-3322Homepage: www.decacables.com

Standard D - 6 Pair #16 AWG, In Shielded Core - IMSA 20-61984 for In Ground Use

Page 124: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 125: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Model ProductAttributes

ProductCategoric UseIdentifier

Categoric UseDescription

Ontario Source:Global Traffic Technologies Canada,Inc.157 Adelaide Street West, Suite 448Toronto ON M5H 4E7Tel: (800) 258-4610Email: [email protected]: www.gtt.com

Electrical Cable,Low Voltage,Pre-emption, Model138

138 3 Cable #20 AWG,Drain #20 AWG

6.80.15 Detector,Emergency VehiclePre-Emption

Electrical List # 6.05.17Cable and Associated Hardware Page 1 of 1Cable, Low Voltage, Pre-emption ** Date: 04-Aug-2015

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 126: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 127: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalCable and Associated HardwareCable, Traffic Signals, Riser

DSM # 6.05.19Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 2409, OPSS 604DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Catalogue No Product Grade / TypeUWC/DE5C14STR Wire Type A - 5 Cable #14 AWG Minimum 19 StrandUWC/DE7C14STR Wire Type B - 7 Cable #14 AWG Minimum 19 StrandUWC/DE5C14 Wire Type C - 5 Cable #14 AWG Solid

Deca Cables Inc.150 North Murray StreetP.O. Box 777Trenton ON K8V 5W6Tel: 613-392-3585Fax: 613-392-7908Toll free: 800-263-3322Homepage: www.decacables.com

UWC/DE7C14 Wire Type D - 7 Cable #14 AWG Solid

82445 Wire Type A - 5 Cable #14 AWG 41 Strand82447 Wire Type B - 7 Cable #14 AWG 41 Strand82452 Wire Type C - 5 Cable #14 AWG Solid82453 Wire Type D - 7 Cable #14 AWG Solid2914S5R Wire Type A - 5 Cable #14 AWG 41 Strand2914S7R Wire Type B - 7 Cable #14 AWG 41 Strand291415R Wire Type C - 5 Cable #14 AWG Solid

Domtech Inc.40 East Davis StTrenton ON K8V 6S4Tel: 613-394-4884Fax: 613-394-5372Toll Free: 888-278-8258

Ontario Source:Impulse Technologies Ltd.170 Admiral BlvdMississauga ON L5T 2N6Tel: 905-670-1269Fax: 905-670-1286Toll Free: 800-667-5475

291417R Wire Type D - 7 Cable #14 AWG Solid

Page 128: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 129: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Electrical Cable and Associated Hardware Cable, Traffic Signals

DSM # 6.05.20Page 1

Date: 01-Jul-2005 SPECIFICATIONS: OPSS 2409, OPSS 604 DRAWINGS: Manufacturer's Drawings CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Catalogue No Product Grade / Type

72-923 4 conductor 14 AWG solid runner cable 600 volts 72-997 7 conductor 14 AWG solid runner cable 600 volts 72-996 12 conductor 14 AWG solid runner cable 600 volts

Deca Cables Inc. 150 North Murray Street P.O. Box 777 Trenton ON K8V 5W6 Tel: 613-392-3585 Fax: 613-392-7908 Toll free: 800-263-3322 Homepage: www.decacables.com

72-995 19 conductor 14 AWG solid runner cable 600 volts

82455 Wire Type A - 4 Cable #14 AWG 82456 Wire Type B - 7 Cable #14 AWG 82451 Wire Type C - 12 Cable #14 AWG 82457 Wire Type D - 19 Cable #14 AWG 4141U Wire Type A - 4 Cable #14 AWG 7141U Wire Type B - 7 Cable #14 AWG 12141U Wire Type C - 12 Cable #14 AWG

Domtech Inc. 40 East Davis St Trenton ON K8V 6S4 Tel: 613-394-4884 Fax: 613-394-5372 Toll Free: 888-278-8258 Ontario Source: Impulse Technologies Ltd. 6450 Kestrel Road Mississauga ON L5T 1Z7 Tel: 905-564-9266 Fax: 905-564-9398 Toll Free: 1-800-667-5475 Homepage: www.impulsetechonline.com

19141U Wire Type D - 19 Cable #14 AWG

024645 Wire Type A - 4 Cable #14 AWG 024646 Wire Type B - 7 Cable #14 AWG 024647 Wire Type C - 12 Cable #14 AWG

Noma Cable Tech 5769 Main St Stouffville ON L4A 2T1 Tel: 905-640-4333 Fax: 905-640-5607 Toll Free: 800-668-0303 Homepage: www.nomact.com Ontario Source: Nedco, Division Westburne

024648 Wire Type D - 19 Cable #14 AWG

Page 130: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 131: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalCable and Associated HardwareDuct Fittings, Expansion and Deflection

DSM # 6.05.30Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 603, OPSS 604, Manufacturer's StandardsDRAWINGS: OPSD 2302.0200, OPSD 2302.0400CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

CompanyFRE Composites75 Rue WalesSt. Andre Est QC J0V 1X0Tel: 450-537-3311Fax: 450-537-8257Toll Free: 888-849-9909Homepage: www.frecomposites.comIPEX Inc.6810 Invader CrescentMississauga ON L5T 2B6Tel: 905-670-7676Fax: 905-670-5295Toll free: 800-268-4664Homepage: www.ipexinc.com

Page 132: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 133: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Catalogue No Product Grade / TypePentair34600 Solon RoadSolon OH 44139Tel: 440-248-0100Fax: 440-248-0723Toll Free: 800-853-0878Email: [email protected]: www.erico.com

Ontario Source:Bel Volt Sales Ltd.

1034 Type A - Copper Clad Grounding Rod 19 mm x 3 mm

Ontario Source:Westburne Ruddy Electric

SC341CC Type A - Copper Clad Grounding Rod 19 mm x 3 mm

Electrical List # 6.05.45Cable and Associated Hardware Page 1 of 1Grounding Rods Date: 01-Jun-2017

SPECIFICATIONS: OPSS 609DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 134: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 135: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ModelEdison Fuse Canada, Division ofCooper Industries Canada Inc.

HEB-AW-RLC-A

Mersen Canada Toronto Inc.69200 Kestrel RoadMississauga ON L5T 1Z1CanadaTel: 416-252-9371Fax: 416-252-6572Web: www.ep-ca.mersen.com

FEB-11-11-BA

Electrical List # 6.25.35Electrical Accessories Page 1 of 1In-line Fuse Holder, Break-away Date: 01-Dec-2014

SPECIFICATIONS: NaDRAWINGS: OPSD 2255.0100, OPSD 2255.0200, OPSD 2255.0300CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 136: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 137: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalElectrical AccessoriesPhotoelectric Controller

DSM # 6.25.60Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 2485, OPSS 614DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product CategoricUse

Catalogue No Product Grade /Type

Categoric UseDescription

Type A - AluminumBox

6612-A Type A 120 volt normallyclosed, delayedresponse

Electric Power Accessories Ltd.(EPAC)558 Massey Road, Units 7&8Guelph ON N1K 1B4Tel: 519-826-5790Fax: 519-826-5779Email: [email protected]

Type D 6690-L Type D 120 to 235 voltsnormally closed,delayed response

Type A - AluminumBox

P-2275 Type A 120 volt normallyclosed, delayedresponse

Type B P2-275 N/O(Previously P21-275)

Type B 120 Volt NormallyOpen, DelayedResponse

Type C EC-DV-ACA-TD Type C 120 to 235 VoltsNormally Closed,Quick Response

Precision Multiple Controls Inc.33 Greenwood AvenueMidland Park NJ 07432Tel: 201-444-0600Fax: 201-445-8575Email:[email protected]:www.precisionmulticontrols.com

Canadian Source:Precision Multiple Controls Inc.600 Orwell Street, Unit 27Mississauga ON L5A 3R9Tel: 905-897-6225Fax: 905-897-7186Homepage:www.precisionmulticontrols.com

Type E P68-275 Type E 205 to 277 VoltsNormally Closed,Delayed Response

Page 138: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 139: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalElectrical AccessoriesPhotoelectric Controller Mounting Adapter

DSM # 6.25.62Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 2485, OPSS 614DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Catalogue No Product Grade / Type Product Attribute Categoric UseDescription

Electric Power Accessories Ltd. (EPAC)558 Massey Road, Units 7&8Guelph ON N1K 1B4Tel: 519-826-5790Fax: 519-826-5779Email: [email protected]

811-12 Type A PhotoelectricalController Receptacleand Pole MountingAssembly

Osram Sylvania Ltd.2001 Drew RdMississauga ON L5S 1S4Tel: 905-673-1188Fax: 905-673-1012Toll Free: 800-667-6772Homepage: www.sylvania.com

W751967 Type B PhotoelectricalController Receptacleand End Cap Assembly

Precision Multiple Controls Inc.33 Greenwood AvenueMidland Park NJ 07432Tel: 201-444-0600Fax: 201-445-8575Email: [email protected]: www.precisionmulticontrols.com

Canadian Source:Precision Multiple Controls Inc.3289 Lenworth Drive, Unit EMississauga ON L4X 2H1Tel: 905-625-6225Fax: 905-625-3876

M2A Type A PhotoelectricalController Receptacleand Pole MountingAssembly

Page 140: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 141: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalElectrical AccessoriesSteel Footing

DSM # 6.25.75Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 616DRAWINGS: OPSD 2201.0100, OPSD 2201.0200CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Catalogue No Product Attribute Categoric Use IdentifiersCC199-120106 Diameter 220mm x Depth 2300mm Applicable to Cabinets 401 C,D,S - DSM

6.28.15; Controller 170/332 Units - DSM6.28.25; that require Mounting HardwareKit - DSM 6.25.80.

Hubbell Canada Inc.870 Brock Road SouthPickering ON L1V 2R3Tel: 416-281-2010Fax: 905-839-9108Toll Free: 800-263-4663Homepage: www.hubbell-canada.com

CC199-120108 Diameter 85mm x Depth 1830mm Applicable to Cabinets 401 C,D,S - DSM6.28.15; Controller 170/332 Units - DSM6.28.25; that require Mounting HardwareKit - DSM 6.25.80.

Page 142: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 143: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalElectrical AccessoriesSteel Footing, Mounting Hardware Kit

DSM # 6.25.80Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 616, OPSD 2201.0100, OPSD 2201.0200DRAWINGS: OPSD 2203.0100CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Catalogue No Product Grade/ Type

ProductAttribute

Categoric UseDescription

Product Notes Categoric UseIdentifiers

CC009-000055 Type A Diameter220mm xLength2300mm

For Poles 7m -15m

ReferenceOPSD 2201.01

Applicable toController170/332 UnitDSM 6.28.25;Steel FootingDSM 6.25.75;and Steel BasePlate DSM6.28.78

CC009-000056 Type B Diameter220mm xLength2300mm

For Poles 3.5m- 7m

ReferenceOPSD 2201.02

Applicable toController170/332 UnitDSM 6.28.25;Steel FootingDSM 6.25.75;and Steel BasePlate DSM6.28.78

CC009-000057 Type C Diameter 85mm x Length1830mm

For SeparateEquipmentPlate

ReferenceOPSD 2201.01

Applicable toController170/332 UnitDSM 6.28.25;Steel FootingDSM 6.25.75;and Steel BasePlate DSM6.28.78

Hubbell Canada Inc.870 Brock Road SouthPickering ON L1V 2R3Tel: 416-281-2010Fax: 905-839-9108Toll Free: 800-263-4663Homepage: www.hubbell-canada.com

CC009-000058 Type D Diameter 85mm x Length1830mm

For IntegralEquipmentPlate

ReferenceOPSD 2201.01

Applicable toController170/332 UnitDSM 6.28.25;Steel FootingDSM 6.25.75;and Steel BasePlate DSM6.28.78

Page 144: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalElectrical AccessoriesSteel Footing, Mounting Hardware Kit

DSM # 6.25.80Page 2

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 616, OPSD 2201.0100, OPSD 2201.0200DRAWINGS: OPSD 2203.0100CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Catalogue No Product Grade/ Type

ProductAttribute

Categoric UseDescription

Product Notes Categoric UseIdentifiers

Type A Diameter220mm xLength2300mm

For Poles 7m -15m

ReferenceOPSD 2201.01

Applicable toController170/332 UnitDSM 6.28.25;Steel FootingDSM 6.25.75;and Steel BasePlate DSM6.28.78

Type B Diameter220mm xLength2300mm

For Poles 3.5m- 7m

ReferenceOPSD 2201.02

Applicable toController170/332 UnitDSM 6.28.25;Steel FootingDSM 6.25.75;and Steel BasePlate DSM6.28.78

Type C Diameter 85mm x Length1830mm

For SeparateEquipmentPlate

ReferenceOPSD 2201.01

Applicable toController170/332 UnitDSM 6.28.25;Steel FootingDSM 6.25.75;and Steel BasePlate DSM6.28.78

NCA/Acrow14305 128th AvenueEdmonton AB T5L 3H3Tel: 403-451-1212Fax: 403-455-0827

Ontario Source:NCA/Acrow110 Belfield RoadToronto ON M9W 1G1Tel: 416-245-4720Fax: 416-242-2727

Type D Diameter 85mm x Length1830mm

For IntegralEquipmentPlate

ReferenceOPSD 2201.01

Applicable toController170/332 UnitDSM 6.28.25;Steel FootingDSM 6.25.75;and Steel BasePlate DSM6.28.78

Page 145: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalElectrical AccessoriesThread Locking Compound

DSM # 6.25.85Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 616DRAWINGS: MTOD 2200.0400, MTOD 2428.0300CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Name Catalogue No Product NotesPre-Applied Thread LockingAdhesive Compound 242

24205 Container Size is 0.5ml

Pre-Applied Thread LockingAdhesive Compound 242

24221 Container Size is 10ml

Pre-Applied Thread LockingAdhesive Compound 242

24231 Container Size is 50ml

Loctite Canada Inc.2225 Meadowpine BlvdMississauga ON L5N 7P2Tel: 905-890-6511Fax: 905-814-5391Toll Free: 800-263-5043Homepage: www.loctite.com

Ontario Source:Acklands-Grainger Inc.

Ontario Source:CB Industrial Parts Network, Canadian Bearings Ltd

Pre-Applied Thread LockingAdhesive Compound 242

24241 Container Size is 250ml

Page 146: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 147: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Notes Product Model Catalogue NoOntario Source:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

Safetran 332 Cabinet Safetran 332 traffic signalcontrol cabinet andequipment according toCaltrans Specification (TEES )

332 STCABS#1401

Canadian Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

McCain 332 Cabinet McCain 332 traffic signalcontrol cabinet andequipment according toCaltrans Specification (TEES )

332

Electrical List # 6.28.12Electronic Controlling Equipment, Traffic Signals Page 1 of 1Cabinet 332 Date: 01-Jun-2017

SPECIFICATIONS: Caltrans TEES, Contract DocumentsDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 148: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 149: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product NotesNovax Industries Corp.202 - 1525 Cliveden Ave.Delta BC V3M 6L2CanadaTel: 604-525-5644Fax: 604-525-2739Email: [email protected]: www.novax.com

332

UPS Pedestal As an option, the 332 cabinet can be supplied with amodified pedestal to house UPS batteries. The UPSpedestal can also be installed as a retrofit to existing332 cabinets. Note: The UPS pedestal may not becompatible with all UPS systems on the DSM.

Electrical List # 6.28.13Electronic Controlling Equipment, Traffic Signals Page 1 of 1Cabinet 332, MTO Date: 01-Dec-2011

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 150: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 151: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product IdentityCanadian Source:Intrex Traffic Inc

336

McCain Traffic Supply Inc.

Canadian Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

336

Peek Traffic Inc.

Ontario Source:Orange Traffic Inc. (Ontario Division)1011 Upper Middle Rd E Suite 1217Oakville ON L6H 5Z9CanadaTel: 647-833-4638Fax: 450-477-0047Email:[email protected]: www.orangetraffic.com/en

336

Electrical List # 6.28.14Electronic Controlling Equipment, Traffic Signals Page 1 of 1Cabinet 336 Date: 01-Jun-2017

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 152: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 153: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Cabinet Type Product NotesNovax Industries Corp.202 - 1525 Cliveden Ave.Delta BC V3M 6L2CanadaTel: 604-525-5644Fax: 604-525-2739Email: [email protected]: www.novax.com

Distributor:Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

401 C

401 D

401 S

Novax Industries Corp.202 - 1525 Cliveden Ave.Delta BC V3M 6L2CanadaTel: 604-525-5644Fax: 604-525-2739Email: [email protected]: www.novax.com

401 C

401 D

401 S

401 R

UPS Pedestal As an option, the 401 cabinet can be supplied with amodified pedestal to house UPS batteries. The UPSpedestal can also be installed as a retrofit to existing401 cabinets. Note: The UPS pedestal may not becompatible with all UPS systems on the DSM.

Electrical List # 6.28.15Electronic Controlling Equipment, Traffic Signals Page 1 of 1Cabinet 401 C,D,S,R Date: 01-Jun-2017

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 154: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 155: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product NameNovax Industries Corp.202 - 1525 Cliveden Ave.Delta BC V3M 6L2CanadaTel: 604-525-5644Fax: 604-525-2739Email: [email protected]: www.novax.com

Distributor:Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

Cabinet 401C, 401D, 401S, Digital Thermostat, Model 500D

Novax Industries Corp.202 - 1525 Cliveden Ave.Delta BC V3M 6L2CanadaTel: 604-525-5644Fax: 604-525-2739Email: [email protected]: www.novax.com

Digital Thermostat

Electrical List # 6.28.16Electronic Controlling Equipment, Traffic Signals Page 1 of 1Digital Thermostat Date: 01-Jun-2017

SPECIFICATIONS: OTSCESDRAWINGS: OTSCESCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 156: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 157: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product IdentityNovax Industries Corp.202 - 1525 Cliveden Ave.Delta BC V3M 6L2CanadaTel: 604-525-5644Fax: 604-525-2739Email: [email protected]: www.novax.com

ALA050

Electrical List # 6.28.17Electronic Controlling Equipment, Traffic Signals Page 1 of 1Cabinet Heater Date: 01-Jun-2017

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 158: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 159: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Notes Product Model Catalogue NoOntario Source:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

Safetran Conflict Monitor Safetran conflict monitoraccording to Caltransspecification ( TEES ),including absence of reddetection functionality

Model 210E 0712010470

Ontario Source:Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

EDI Conflict Monitor EDI conflict monitoraccording to Caltransspecification ( TEES ),including absence of reddetection functionality

Model 210E

Electrical List # 6.28.19Electronic Controlling Equipment, Traffic Signals Page 1 of 1Conflict Monitor Date: 01-Dec-2011

SPECIFICATIONS: Caltrans TEES, Contract DocumentsDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 160: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 161: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalElectronic Controlling Equipment, Traffic SignalsConflict Monitor 212

DSM # 6.28.20Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product IdentityTopping Electronics450 MidwestScarborough ON M1P 3A9Tel: 416-285-1272Fax: 416-757-8096Email: [email protected]

212-E

Page 162: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 163: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Electrical Electronic Controlling Equipment, Traffic Signals Controller 170

DSM # 6.28.25Page 1

Date: 01-Mar-2007 SPECIFICATIONS: OTSCES DRAWINGS: CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Identity Topping Electronics 450 Midwest Rd. Scarborough ON M1P 3A9 Tel: 416-285-1272 Fax: 416-757-8096 Email: [email protected]

170MC

Page 164: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 165: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Notes / RemarksOntario Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

DTS 170E Controller Dynamic Traffic Systems 170E Controller

McCain Traffic Supply Inc.

Canadian Source:Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

McCain 170E Controller McCain 170E Controller

Topping Electronics450 Midwest Rd.Scarborough ON M1P 3A9Tel: 416-285-1272Fax: 416-757-8096Email: [email protected]: www.toppingelectronics.ca

Topping 170E Controller Topping Electronics 170E Controller

Electrical List # 6.28.26Electronic Controlling Equipment, Traffic Signals Page 1 of 1Controller 170E Date: 01-Jun-2017

SPECIFICATIONS: Contract Documents, Caltrans TEESDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 166: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 167: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product Model Categoric Use IdentifiersOntario Source:Global Traffic Technologies Canada,Inc.157 Adelaide Street West, Suite 448Toronto ON M5H 4E7Tel: (800) 258-4610Email: [email protected]: www.gtt.com

Phase Selector 262 Applicable to Cable, Low Voltage,Pre-emption DSM 6.05.17 andDetector, Emergency VehiclePre-emption DSM 6.80.15

Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Discriminator Card 291 Applicable to Cable, Low Voltage,Pre-emption DSM 6.05.17 andDetector, Emergency VehiclePre-emption DSM 6.80.15

Discriminator Card 292 Applicable to Cable, Low Voltage,Pre-emption DSM 6.05.17 andDetector, Emergency VehiclePre-emption DSM 6.80.15

Electrical List # 6.28.30Electronic Controlling Equipment, Traffic Signals Page 1 of 1Emergency Vehicle Pre-emption Board Date: 04-Apr-2017

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 168: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 169: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product IdentityNovax Industries Corp.202 - 1525 Cliveden Ave.Delta BC V3M 6L2CanadaTel: 604-525-5644Fax: 604-525-2739Email: [email protected]: www.novax.com

204

Traffic Sensor Corp

Canadian Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

TSC 204

Electrical List # 6.28.35Electronic Controlling Equipment, Traffic Signals Page 1 of 1Flasher 204 Date: 01-Jun-2017

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 170: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 171: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalElectronic Controlling Equipment, Traffic SignalsIsolator, A.C. 252

DSM # 6.28.40Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

No Listings

Page 172: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 173: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product IdentityNovax Industries Corp.202 - 1525 Cliveden Ave.Delta BC V3M 6L2CanadaTel: 604-525-5644Fax: 604-525-2739Email: [email protected]: www.novax.com

242

Electrical List # 6.28.45Electronic Controlling Equipment, Traffic Signals Page 1 of 1Isolator, D.C. 242 Date: 01-Jun-2017

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 174: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 175: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product IdentityEberle Design Inc

Canadian Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

LM602

Electromega Ltd.11-1155 North Service Rd W.Oakville ON L6M 3E3Tel: 800-663-7071Fax: 855-893-4087Office: 905-847-5458Email: [email protected]: www.electromega.com

Ontario Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

Reno 222

Peek Traffic Inc.

Canadian Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

Sarasota 222

Electrical List # 6.28.50Electronic Controlling Equipment, Traffic Signals Page 1 of 1Loop Detector 222 Date: 01-Jun-2017

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 176: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 177: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalElectronic Controlling Equipment, Traffic SignalsRelay 430

DSM # 6.28.70Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product IdentityMidtex, Div. of CII Technologies9-B2 Butterfield TrailEl Paso TX 79906Tel: 915-772-1061Fax: 915-772-1116Homepage: www.midtex.com

Midtex 136-62T3A1

Page 178: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 179: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalElectronic Controlling Equipment, Traffic SignalsSteel Footing, Base Plate

DSM # 6.28.78Page 1

Date: 01-Oct-2000

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: OPSD 2203.0300CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Catalogue No Categoric Use IdentifiersHubbell Canada Inc.870 Brock Road SouthPickering ON L1V 2R3Tel: 416-281-2010Fax: 905-839-9108Toll Free: 800-263-4663Homepage: www.hubbell-canada.com

CTI99-400002 Applicable to Cabinets 401 C,D,S - DSM 6.28.15; Controller 170/332 Unit - DSM6.28.25; and Steel Footing - DSM 6.25.75

Page 180: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 181: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product IdentityNovax Industries Corp.202 - 1525 Cliveden Ave.Delta BC V3M 6L2CanadaTel: 604-525-5644Fax: 604-525-2739Email: [email protected]: www.novax.com

200

Traffic Sensor Corp

Canadian Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

TSC 200

Electrical List # 6.28.80Electronic Controlling Equipment, Traffic Signals Page 1 of 1Switch Pack 200 Date: 01-Jun-2017

SPECIFICATIONS: OTSCESDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 182: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 183: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Model Prequalification StatusAddco, LLC

Ontario Source:Almon Equipment Ltd.45 Racine Rd.Toronto ON M9W 2Z4Tel: 416-743-1771Fax: 416-747-9940Email: [email protected]: www.almon.ca

30x56 ADDCO BRICK: DH1000-MTO; Ethernet NTCIP Approved

Solar Technology, Inc.7620 Cetronia Rd.Allentown PA 18106United StatesTel: 610-391-8600Fax: 610-391-8601Web: www.solartechnology.com

MB-3056-MTO Message Board Approved

Ver-mac Inc.1781 Bresse St.,Ste-Foy QC G2G 2V2Tel: 418-654-1303Fax: 418-654-0517Toll Free: 888-488-7446Web: www.ver-mac.com

PCMS 1500C-MTO:30x56 Full-matrix, Ethernet NTCIP Approved

Wanco, Inc.5870 Tennyson St.Arvada CO 80003-6903USATel: 303-427-5700Fax: 303-427-5725Email: [email protected]: www.wanco.com

Ontario Source:Almon Equipment Ltd.45 Racine Rd.Toronto ON M9W 2Z4Tel: 416-743-1771Fax: 416-747-9940Email: [email protected]: www.almon.ca

WMTO Approved

Electrical List # 6.30.21Electronic Highway Information Page 1 of 1Portable Variable Message Signs (PVMS) Date: 01-Jun-2017

SPECIFICATIONS: OPSS 706 (Formerly OPSS 543), SP 685S06 (ATMS)DRAWINGS:CUSTODIAL OFFICE : Central - ATMS - (416) 235-4501

Page 184: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 185: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

CompanyAluminous Lighting Products114 Healey RoadBolton ON L7E 5R2Tel: 877-625-7240Fax: 888-700-8656Office: 905-857-8100Web: www.aluminous.com

Lumec Manufacturing, A PhilipsGroup Brand64 Mateway Park DriveRenfrew ON K7V 2L5CanadaTel: 613-432-3653Fax: 613-432-9326Email: [email protected]: www.ussmfg.com

Metal Pole-Lite Inc.1007 Route Edouard VIISt-Philippe QC J0L 2K0CanadaTel: 450-659-8951Fax: 450-444-3661Email: [email protected]: www.polelite.com

Spina's Steel Workers Co. Ltd.229 Wilkinson Rd.Brampton ON L6T 4M2CanadaTel: 905-453-2111Fax: 905-453-8334Email: [email protected]: www.spinasteel.com

Valmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

Electrical List # 6.40.15Luminaires and Associated Hardware Page 1 of 1Brackets, Aluminum Date: 01-Jun-2017

SPECIFICATIONS: OPSS 617, OPSS 2428DRAWINGS: OPSD 2420.0100CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 186: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 187: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Bracket Length (metres)Aluminous Lighting Products114 Healey RoadBolton ON L7E 5R2Tel: 877-625-7240Fax: 888-700-8656Office: 905-857-8100Web: www.aluminous.com

1.8 m

2.7 m

Dynapole, Div of DynametalIndustries Ltd.2425 Lucknow Drive, Unit 9-10Mississauga ON L5S 1H1CanadaTel: 905-671-1507Fax: 905-671-4606Toll Free: 1-877-DYNAPOLEWeb: www.dynapole.com

1.8 m

2.7 m

Lumec Manufacturing, A PhilipsGroup Brand64 Mateway Park DriveRenfrew ON K7V 2L5CanadaTel: 613-432-3653Fax: 613-432-9326Email: [email protected]: www.ussmfg.com

2.7 m

Spina's Steel Workers Co. Ltd.229 Wilkinson Rd.Brampton ON L6T 4M2CanadaTel: 905-453-2111Fax: 905-453-8334Email: [email protected]: www.spinasteel.com

1.8 m

2.7 m

Electrical List # 6.40.20Luminaires and Associated Hardware Page 1 of 1Brackets, Steel Truss Date: 01-Jun-2017

SPECIFICATIONS: OPSS 617DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 188: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 189: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product NotesAcuity Brands Lighting Canada, Inc.

Ontario Source:Acuity Brands Lighting Canada, Inc.35 B Minthorn Blvd.Markham ON L3T 7N5CanadaTel: 905-882-3319Fax: 905-886-7973Email: [email protected]: www.acuitybrands.com

Refer to MTO Accepted Photometric List for accepted photometrc curves (Holophane)

Cooper Industries (Electrical) Inc.5925 McLaughlin Rd.Mississauga ON L5R 1B8Tel: 905-501-3000Fax: 905-568-7049Toll free: 800-863-1354Web: www.cooperlighting.com

Refer to MTO Accepted Photometrics list for accepted photometric curves.

Quality Lighting, Div of JJI Ltd

Canadian Source:Spectralume Lighting TechnologiesInc

For awarded contracts and maintenance work only. Not for new designs.

Electrical List # 6.40.40Luminaires and Associated Hardware Page 1 of 1High Mast, High Pressure Sodium, Luminaire Date: 01-Jun-2017

SPECIFICATIONS: OPSS 617, OPSS 2432, SP 617F01, Luminaire PhotometricsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 190: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 191: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product NotesAcuity Brands Lighting Canada, Inc.35 B Minthorn Blvd.Markham ON L3T 7N5CanadaTel: 905-882-3319Fax: 905-886-7973Email: [email protected]: www.acuitybrands.com

Acuity/Holophane High Mast LED Luminaire Refer to MTO Accepted Luminaire Photometrics Listfor accepted photometric curves

Cree Canada6889 Rexwood Road #3Mississauga ON L4V 1R2Tel: 800-473-1234Fax: 800-890-7507Web: www.cree.com/canada

Cree High Mast LED Luminaire Refer to MTO Accepted Luminaire Photometrics Listfor accepted photometric curves

Electrical List # 6.40.42Luminaires and Associated Hardware Page 1 of 1High Mast, Light Emitting Diode ( LED ), Luminaire Date: 02-Aug-2016

SPECIFICATIONS: Luminiare PhotometricsDRAWINGS: Contract Documents, Manufacturer's DrawingsCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 192: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 193: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity ANSI No. Catalogue No Product Grade / TypeCurrent, Powered by GE2300 Meadowvale Blvd.Mississauga ON L5N5P9CanadaTel: 905-302-3538Email: [email protected]: www.ge.com

Canadian Source:N. Rutenberg Sales

Lamp - 70 Watts S62ME-70 LU70 Type A - Clear, Standard Type

Lamp - 100 Watts S54SB-100 LU100 Type A - Clear, Standard Type

Lamp - 150 Watts S55SC-150 LU150/55 Type A - Clear, Standard Type

Lamp - 200 Watts S66MN-200 LU200 Type A - Clear, Standard Type

Lamp - 250 Watts S50VA-250 LU250 Type A - Clear, Standard Type

Lamp - 310 Watts S67MR-310 LU310 Type A - Clear, Standard Type

Lamp - 400 Watts S51WA-400 LU400 Type A - Clear, Standard Type

Osram Mexico

Canadian Source:Osram Sylvania Ltd.

Lamp - 70 Watts S62ME-70 LU70 Type A - Clear, Standard Type

Lamp - 100 Watts S54SB-100 LU100 Type A - Clear, Standard Type

Lamp - 150 Watts S55SC-150 LU150 Type A - Clear, Standard Type

Lamp - 250 Watts S50VA-250 LU250 Type A - Clear, Standard Type

Lamp - 400 Watts S51WA-400 LU400 Type A - Clear, Standard Type

Osram Sylvania Canada Ltd Lamp - 100 Watts S54SB-100 LU100 Type A - Clear, Standard Type

Lamp - 250 Watts S50VA-250 LU250 Type A - Clear, Standard Type

Lamp - 400 Watts S51WA-400 LU400 Type A - Clear, Standard Type

Lamp - 150 Watts S55SC-150 LU150 or LU155 Type A - Clear, Standard Type

Lamp - 200 Watts S66MN-200 LU200 Type A - Clear, Standard Type

Lamp - 250 Watts S50VA-250/S LU250S Type C - Clear, Super Type

Lamp - 310 Watts S67MR-310 LU310 Type A - Clear, Standard Type

Osram Sylvania Canada Ltd

Canadian Source:Osram Sylvania Ltd.

Lamp - 70 Watts S62ME-70 LU70 Type A - Clear, Standard Type

Electrical List # 6.40.48Luminaires and Associated Hardware Page 1 of 2High Pressure Sodium, Lamps Date: 01-Jun-2017

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 194: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity ANSI No. Catalogue No Product Grade / TypePhilips Lighting

Canadian Source:Philips Electronics Ltd.

Lamp - 70 Watts S62ME-70 C70S62 Type A - Clear, Standard Type

Lamp - 100 Watts S54SB-100 C100S54 Type A - Clear, Standard Type

Lamp - 150 Watts S55SC-150 C150S55 Type A - Clear, Standard Type

Lamp - 200 Watts S66MN-200 C200S66 Type A - Clear, Standard Type

Lamp - 250 Watts S50VA-250 C250S50 Type A - Clear, Standard Type

Lamp - 250 Watts S50VA-250/S C250S50/S Type C - Clear, Super Type

Lamp - 310 Watts S67MR-310 C310S67 Type A - Clear, Standard Type

Lamp - 400 Watts S51WA-400 C400S51 Type A - Clear, Standard Type

Ontario Source:Standard Products Inc.6270 Kestrel RdMississauga ON L5T 1Z4Tel: 905-564-2836Fax: 905-564-2837Toll Free: 800-268-7702Email: [email protected]: www.standardpro.com

EYE Sunlux - 70 Watts S62-70 LU70 Clear, Standard Type

EYE Sunlux - 100 Watts S54-100 LU100 Clear, Standard Type

EYE Sunlux - 150 Watts S55-150 LU150 Clear, Standard Type

EYE Sunlux - 200 Watts S66-200 LU200 Clear, Standard Type

EYE Sunlux - 250 Watts S50-250 LU250 Clear, Standard Type

EYE Sunlux - 400 Watts S51-400 LU400 Clear, Standard Type

EYE Sunlux - 1000 Watts S52-1000 LU1000 Clear, Standard Type

Electrical List # 6.40.48Luminaires and Associated Hardware Page 2 of 2High Pressure Sodium, Lamps Date: 01-Jun-2017

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 195: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product NotesOntario Source:Standard Products Inc.6270 Kestrel RdMississauga ON L5T 1Z4Tel: 905-564-2836Fax: 905-564-2837Toll Free: 800-268-7702Email: [email protected]: www.standardpro.com

Eye Ignitron High Pressure Sodium Lamps with Internal Ignitor -Locations where it is difficult to change the lamp

Electrical List # 6.40.49Luminaires and Associated Hardware Page 1 of 1High Pressure Sodium, Lamps, with Igniter Date: 01-Dec-2008

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 196: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 197: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:This listing is primarily to show the approved manufacturers. For specific luminaire information refer to Contract Documents.

Company Product NotesAcuity Brands Lighting Canada, Inc.

Ontario Source:Acuity Brands Lighting Canada, Inc.35 B Minthorn Blvd.Markham ON L3T 7N5CanadaTel: 905-882-3319Fax: 905-886-7973Email: [email protected]: www.acuitybrands.com

Refer to MTO Accepted Photometrics list for accepted photometric curves (Holophane)

Cooper Industries (Electrical) Inc.5925 McLaughlin Rd.Mississauga ON L5R 1B8Tel: 905-501-3000Fax: 905-568-7049Toll free: 800-863-1354Web: www.cooperlighting.com

Refer to MTO Accepted Photometrics list for accepted photometric curves.

Hubbell Canada Inc.

Canadian Source:Spectralume Lighting TechnologiesInc

Refer to MTO Accepted Photometrics list for accepted photometric curves.

Philips Lighting640 Boulevard Curé-BoivinQuébec QC J7G 2A7Canada

For awarded contracts and maintenance work only. Not for new designs.

Electrical List # 6.40.50Luminaires and Associated Hardware Page 1 of 1Roadway Lighting, High Pressure Sodium, Luminaire Date: 01-Jun-2017

SPECIFICATIONS: OPSS 617, OPSS 2432, SP 617F01, Luminaire PhotometricsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 198: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 199: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product NotesAcuity Brands Lighting Canada, Inc.35 B Minthorn Blvd.Markham ON L3T 7N5CanadaTel: 905-882-3319Fax: 905-886-7973Email: [email protected]: www.acuitybrands.com

American Electric LED Luminaire Refer to MTO Accepted Photometrics List foraccepted photometric curves

American Electric LED Luminaire Refer to MTO Accepted Photometrics List foraccepted photometric curves

American Electric LED Luminaire Refer to MTO Accepted Photometrics List foraccepted photometric curves

Cooper Industries (Electrical) Inc.5925 McLaughlin Rd.Mississauga ON L5R 1B8Tel: 905-501-3000Fax: 905-568-7049Toll free: 800-863-1354Web: www.cooperlighting.com

Navion LED Luminaire Refer to MTO Accepted Photometrics List foraccepted photometric curves

Verdeon LED Luminaire Refer to MTO Accepted Photometrics List foraccepted photometric curves

Cree Canada6889 Rexwood Road #3Mississauga ON L4V 1R2Tel: 800-473-1234Fax: 800-890-7507Web: www.cree.com/canada

LED Luminaire Refer to MTO Accepted Photometrics List foraccepted photometric curves

Current, Powered by GE2300 Meadowvale Blvd.Mississauga ON L5N5P9CanadaTel: 905-302-3538Email: [email protected]: www.ge.com

Ontario Source:Tymat Solutions5370 Munro Court, Unit CBurlington ON L7L 5N8CanadaTel: 289-337-2884Web: www.tymat.com

Evolve Roadway Scaleable ( ERS ) LED Luminaire Refer to MTO Accepted Photometrics List foraccepted photometric curves

LED Roadway Lighting Ltd. (Plant)21 Tantramar CrescentAmherst NS B4H 4S8CanadaTel: 877-533-5755Fax: 888-533-5755Office: 902-667-1228Web: www.ledroadwaylighting.com

Satellite Series Refer to MTO Accepted Photometrics List foraccepted photometric curves

Electrical List # 6.40.52Luminaires and Associated Hardware Page 1 of 1Roadway Lighting, Light Emitting Diode (LED), Luminaire Date: 01-Feb-2018

SPECIFICATIONS: Luminaire PhotometricsDRAWINGS: Manufacturer's Drawings, Contract DocumentsCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 200: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 201: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalLuminaires and Associated HardwareObstruction Luminaire

DSM # 6.40.55Page 1

Date: 01-Oct-2000

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Identity Catalogue NoHubbell Canada Inc.870 Brock Road SouthPickering ON L1V 2R3Tel: 416-281-2010Fax: 905-839-9108Toll Free: 800-263-4663Homepage: www.hubbell-canada.com

Vapour Tight Fixture AOW10110

Page 202: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 203: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalLuminaires and Associated HardwareSign Lighting

DSM # 6.40.75Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 2435, OPSS 612DRAWINGS: OPSD 2425.0100CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Name Catalogue No Product Grade / TypeOsram Sylvania Ltd.2001 Drew RdMississauga ON L5S 1S4Tel: 905-673-1188Fax: 905-673-1012Toll Free: 800-667-6772Homepage: www.sylvania.com

Signlite LXF10-70-VOLT T Signlite Series

Page 204: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 205: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Catalogue NoOsram Sylvania Ltd. Wiring Trough 826045

End Cover W401470 Part 1

Intermediate Cover W401470 Part 2

Ground Plate

Electrical List # 6.40.80Luminaires and Associated Hardware Page 1 of 1Sign Truss Fittings Date: 01-Jun-2017

SPECIFICATIONS: Manufacturer's Standards, OPSS 612 (Withdrawn* Nov 2006))DRAWINGS: OPSD 2600.0100 (Withdrawn* Nov 2006), OPSD

2600.0200 (Withdrawn* Nov 2006), OPSD 2600.0300(Withdrawn* Nov 2006), OPSD 2600.0400 (Withdrawn*Nov 2006), OPSD 2600.0500 (Withdrawn* Nov 2006)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 206: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 207: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product NotesAcuity Brands Lighting Canada, Inc.

Ontario Source:Acuity Brands Lighting Canada, Inc.35 B Minthorn Blvd.Markham ON L3T 7N5CanadaTel: 905-882-3319Fax: 905-886-7973Email: [email protected]: www.acuitybrands.com

Refer to MTO Accepted Photometrics list for accepted photometric curves (Holophane)

Philips Lighting640 Boulevard Curé-BoivinQuébec QC J7G 2A7Canada

Refer to MTO Accepted Photometrics list for accepted photometric curves.

Schreder Inc.3539 AshbyMontreal QC H4R 2K3Tel: 514-337-6440Fax: 514-337-2652Web: www.schreder.ca

Refer to MTO Accepted Photometrics list for accepted photometric curves.

Electrical List # 6.40.85Luminaires and Associated Hardware Page 1 of 1Underpass Luminaire Date: 01-Jun-2017

SPECIFICATIONS: OPSS 611, SP 611F01, Luminaire PhotometricsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 208: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 209: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Standard NoLumec Manufacturing, A PhilipsGroup Brand64 Mateway Park DriveRenfrew ON K7V 2L5CanadaTel: 613-432-3653Fax: 613-432-9326Email: [email protected]: www.ussmfg.com

Direct Buried OPSD 2230.01

Metal Pole-Lite Inc.1007 Route Edouard VIISt-Philippe QC J0L 2K0CanadaTel: 450-659-8951Fax: 450-444-3661Email: [email protected]: www.polelite.com

Base Mounted OPSD 2432.010

Direct Buried OPSD 2230.01

Spina's Steel Workers Co. Ltd.229 Wilkinson Rd.Brampton ON L6T 4M2CanadaTel: 905-453-2111Fax: 905-453-8334Email: [email protected]: www.spinasteel.com

Base Mounted OPSD 2432.010

Direct Buried OPSD 2230.01

Union Metal Corporation Base Mounted OPSD 2432.010

Direct Buried OPSD 2230.01

Valmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

Base Mounted OPSD 2432.010

Direct Buried OPSD 2230.01

Electrical List # 6.60.10Poles Page 1 of 1Aluminum Date: 01-Jun-2017

SPECIFICATIONS: OPSS 615, OPSS 2451 (Withdrawn*), OPSS 2452DRAWINGS: OPSD 2230.0100 (Withdrawn* Nov 2006), OPSD

2432.0100CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 210: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 211: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalPolesAnchor, Rock Installation

DSM # 6.60.11Page 1

Date: 01-Oct-2000

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: OPSD 2236.0100CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

No Listings

Page 212: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 213: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalPolesAnchorage Assembly in Concrete

DSM # 6.60.12Page 1

Date: 01-Oct-2000

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: MTOD 2200.0400CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Model RequirementsAMG Metals Inc.34 Holtby AveBrampton ON L6X 2M1Tel: 905-453-6113Fax: 905-453-9664Email: [email protected]: www.amgmetals.com

4UJ

NCA/Acrow14305 128th AvenueEdmonton AB T5L 3H3Tel: 403-451-1212Fax: 403-455-0827

Ontario Source:NCA/Acrow110 Belfield RoadToronto ON M9W 1G1Tel: 416-245-4720Fax: 416-242-2727

DGR-2S Refer to Contract drawings for BCD information

Page 214: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 215: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalPolesBase, Grooved-Coupler

DSM # 6.60.15Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 2440, OPSS 615, Manufacturer's StandardsDRAWINGS: OPSD 2428.0100, Manufacturer's DrawingsCUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Name Catalogue NoSafety Base Ltd.490 Berry StWinnipeg MB R3J 1N9Tel: 204-896-6900Fax: 204-896-6969Email: [email protected]: www.safetybase.com

Ontario Source:Sentinel Pole & Traffic Equipment Ltd.375 Admiral Blvd Unit 3Mississauga ON L5T 2N1Tel: 905-564-2929Fax: 905-564-0755Other Tel: Tor (416) 460-7440

Grooved-Coupler Safe-T-Base SB12516 or (Metric SB32406)

Page 216: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 217: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product NameStressCrete Ltd.840 Walker's LineBurlington ON L7R 3X9CanadaTel: 905-632-9301Fax: 905-632-8116Toll Free: 800-268-7809Email: [email protected]: www.stresscrete.com

Pole, Concrete, Highway Lighting

Utility Structures Inc.61 Bongard AvenueOttawa ON K2E 6V2Tel: 613-225-6398Fax: 613-225-1681Toll Free: 800-267-6466Email: [email protected]: www.utilitystructures.com

Pole, Concrete, Lighting, Highway

Electrical List # 6.60.20Poles Page 1 of 1Concrete, Spun Date: 01-Jun-2012

SPECIFICATIONS: OPSS 615, OPSS 2421DRAWINGS: OPSD 2410.0100, OPSD 2225.0100CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 218: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 219: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product RequirementCHM Industries, Inc.700 E. McLeroy Blvd, Suite ASaginaw TX 76179United StatesTel: 682-286-0046Fax: 682-286-0086

Canadian Source:James A. Del Greco Sales Inc.29 Earls Crt, RR #3Thornton ON L0L 2N0CanadaTel: 705-291-0115Fax: 705-291-0144Email: [email protected]

High Mast Lowering Device Top-latching system with internal drive or externaldrive

Valmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

High Mast Lowering Device Top-latching system with internal drive or externaldrive

Electrical List # 6.60.35Poles Page 1 of 1High Mast, Device for Raising and Lowering Date: 04-Apr-2017

SPECIFICATIONS: OPSS 630, OPSS 2476, SP 630F02, Contract DocumentsDRAWINGS: MTOD 2453.0200, Manufacturer's Drawings, MTOD

2453.0210, Contract Documents, OPSD2453.0800, OPSD 2453.1400, OPSD 2453.1500, OPSD2453.1600, OPSD 2453.1900, OPSD 2453.2000, OPSD2453.0910, OPSD 2453.1700, OPSD 2453.1800, OPSD2453.0600, OPSD 2453.2100, OPSD 2453.2200

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 220: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 221: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Material Requirement Pole Type 8-Sided Pole Type 12-SidedMetal Pole-Lite Inc.1007 Route Edouard VIISt-Philippe QC J0L 2K0CanadaTel: 450-659-8951Fax: 450-444-3661Email: [email protected]: www.polelite.com

Galvanized steel and paint coated 25m, 30m, 35m 40m, 45m

Nova Pole International Inc.Unit 102, 19433 96 Avenue,Surrey BC V4N 4C4CanadaTel: 604-881-0090Fax: 604-881-0008Web: www.novapole.com

Galvanized Steel and paint coated 25m, 30m, 35m 40m, 45m

Spina's Steel Workers Co. Ltd.229 Wilkinson Rd.Brampton ON L6T 4M2CanadaTel: 905-453-2111Fax: 905-453-8334Email: [email protected]: www.spinasteel.com

Galvanized Steel and paint coated 25m, 30m, 35m 40m, 45m

Valmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

Galvanized Steel and paint coated 25m, 30m, 35m 40m, 45m

Electrical List # 6.60.40Poles Page 1 of 1High Mast, Sectional Steel Date: 04-Apr-2017

SPECIFICATIONS: OPSS 630, OPSS 631, OPSS.PROV 911, OPSS 2471, OPSS 2474, Contract DocumentsDRAWINGS: OPSD 2450.0110 (Replaced by MTOD 2450.011 for

MTO), OPSD 2450.0210 (Replaced by MTOD 2450.021for MTO), OPSD 2453.0100, OPSD 2453.0500, OPSD2456.0110, Contract Documents, OPSD 2453.0200

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 222: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 223: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Note: Where specific projects require sectional steel pole heights not listed in OPSS 2453, the suppliers listed below are permitted to supply these poleheights provided the poles are according to OPSS 2453 in all other respects.

Company Pole Mounting Pole Height (metres) Product Model Notes / RemarksAMG Metals Inc.21 Bales Drive WestSharon ON L0G 1V0CanadaTel: 905-953-4111Fax: 905-953-0844Email: [email protected]: www.amgmetals.com

Base Mounted 10.531 SSP-M 61 - 10.5B

Base Mounted 8.723 SSP-M 62 - 8.7B

Base Mounted 6.974 SSP-M 63 - 7.0B

Base Mounted ( Flasher ) 3.3 FP-M 01 - 3.3B

Direct Buried 12.00 SSP-M 71 - 12.0D

Direct Buried 10.25 SSP-M 72 - 10.25D

Direct Buried 8.70 SSP-M 73 - 8.7D

Direct Buried 7.0 SSP-M 74 - 7.0D

Direct Buried 5.25 SSP-M 75 - 5.25D

Polefab Inc.155 Pony DriveNewmarket AB L3Y 7B5CanadaTel: 905-836-2222Fax: 905-836-5612Email: [email protected]: www.polefab.com

Base Mounted 10.516 C51980T3

Base Mounted 8.719 C51981T3

Base Mounted 6.991 C51982-1T3

Base Mounted ( Flasher ) 3.300 B51750T3

Direct Buried 12.066 C51983T3

Direct Buried 10.268 B51984T3

Direct Buried 8.712 A51742T3

Direct Buried 6.966 A51742-2T3

Direct Buried 5.270 A51742-1T3

Electrical List # 6.60.75Poles Page 1 of 2Sectional Steel Date: 04-Apr-2017

SPECIFICATIONS: OPSS 615, OPSS 2453DRAWINGS: OPSD 2232.0100CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 224: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Pole Mounting Pole Height (metres) Product Model Notes / RemarksValmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

Valmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

Based Mounted 7.0 m SM-8923 Section Max -SingleSection Pole

Direct Buried 5.25 m SM-8918DB Section Max-SingleSection Pole

Flasher Beacon Pole 3.3 m SM-8911 Section Max-SingleSection Pole

Base Mounted 8.7 m SM-8929 Section Max-SingleSection Pole

Base Mounted 10.5 m SM-8935 Section Max-SingleSection Pole

Direct Buried 7.0 m SM-8923DB Section Max-SingleSection Pole

Direct Buried 8.7 m SM-8929DB Section Max -SingleSection Pole

Direct Buried 10.25 SM-8934DB Section Max-SingleSection Pole

Direct Buried 11.9 m SM-8940DB Section Max-SingleSection Pole

Electrical List # 6.60.75Poles Page 2 of 2Sectional Steel Date: 04-Apr-2017

SPECIFICATIONS: OPSS 615, OPSS 2453DRAWINGS: OPSD 2232.0100CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 225: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Mounting Gussets Dwg. #Dynapole, Div of DynametalIndustries Ltd.2425 Lucknow Drive, Unit 9-10Mississauga ON L5S 1H1CanadaTel: 905-671-1507Fax: 905-671-4606Toll Free: 1-877-DYNAPOLEWeb: www.dynapole.com

Base Mounted Gusseted OPSD 2415.0100

Concrete Barrier Mounted Gusseted OPSD 2416.0100

Metal Pole-Lite Inc.1007 Route Edouard VIISt-Philippe QC J0L 2K0CanadaTel: 450-659-8951Fax: 450-444-3661Email: [email protected]: www.polelite.com

Base Mounted Gusseted OPSD 2415.0100

Spina's Steel Workers Co. Ltd.229 Wilkinson Rd.Brampton ON L6T 4M2CanadaTel: 905-453-2111Fax: 905-453-8334Email: [email protected]: www.spinasteel.com

Octagonal Concrete BarrierMounted

Gusseted OPSD 2416.0100

Octagonal Base Mounted Gusseted OPSD 2415.010

Round Concrete Barrier Mounted Gusseted OPSD 2416.010

Round Base Mounted Gusseted OPSD 2415.010

Octagonal Concrete BarrierMounted

Non-gusseted OPSD 2416.011/Spina #15-04-2015-S1 Concrete BarrierMounted

Octagonal Base Mounted Non-gusseted OPSD 2415.011/Spina #15-04-2017-S1 Base Mounted

Round Concrete Barrier Mounted Non-gusseted OPSD 2416.011/Spina #15-04-2017-S1 Concrete BarrierMounted

Round Based Mounted Non-gusseted OPSD 2415.011/Spina #15-04-2017-S1 Base Mounted

Union Metal Corporation Base Mounted Gusseted OPSD 2415.0100

Concrete Barrier Mounted Gusseted OPSD 2416.0100

Electrical List # 6.60.80Poles Page 1 of 2Steel, Base Mounted Date: 04-Apr-2017

SPECIFICATIONS: OPSS 615, OPSS 2423, SP 615S02DRAWINGS: OPSD 2415.0100, OPSD 2416.0100, OPSD 2228.0100CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 226: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Mounting Gussets Dwg. #Valmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

Concrete Barrier Mounted(Octagonal)

Non-gusseted Valmont MTO-SLP-OT-BM

Base Mounted (Octagonal) Non-gusseted Valmont MTO-SLP-OT-RS

Concrete Barrier Mounted (Round) Non-gusseted Valmont MTO-SLP-RT-BM

Base Mounted (Round) Non-gusseted Valmont MTO-SLP-RT-RS

Electrical List # 6.60.80Poles Page 2 of 2Steel, Base Mounted Date: 04-Apr-2017

SPECIFICATIONS: OPSS 615, OPSS 2423, SP 615S02DRAWINGS: OPSD 2415.0100, OPSD 2416.0100, OPSD 2228.0100CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 227: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Heavy Class Pole - Mast Arm Attachments: Length of mast arm with signal head shall not exceed 7.6 metres. Total length of all mast arms on one poleshall not exceed 13.1 metres.

Company Product Name NotesAMG Metals Inc.21 Bales Drive WestSharon ON L0G 1V0CanadaTel: 905-953-4111Fax: 905-953-0844Email: [email protected]: www.amgmetals.com

Heavy Class Sectional Steel Pole, Base Mounted,Round

10.531 m Height, Model HCP-M 61 - 10.5B.Reference: Manufacturer's Drawing RD 101-103

Heavy Class Sectional Steel Pole, Base Mounted,Round

9.0 m Height, Model HCP-M 62 - 9.0B. Reference:Manufacturer's Drawing RD 101-104

Heavy Class Sectional Steel Pole, Base Mounted,Round

7.5 m Height, Model HCP-M 62 - 7.5B. Reference:Manufacturer's Drawing RD 101-105

Heavy Class Sectional Steel Pole, Base Mounted,Round

6.0 m Height, Model HCP-M 63 - 6.0B. Reference:Manufacturer's Drawing RD 101-106

Metal Pole-Lite Inc.1007 Route Edouard VIISt-Philippe QC J0L 2K0CanadaTel: 450-659-8951Fax: 450-444-3661Email: [email protected]: www.polelite.com

Heavy Class Steel Pole - Round Heavy Class pole heights from 6 to 10.5 metres.Reference: Manufacturer's Drawing B-35301

Polefab Inc.155 Pony DriveNewmarket AB L3Y 7B5CanadaTel: 905-836-2222Fax: 905-836-5612Email: [email protected]: www.polefab.com

Heavy Class Sectional Steel Pole - Round Heavy Class pole heights from 6 to 10.5 metres.Reference: Manufacturer's Drawings B52450-10.5,9.0, 7.5, 6.0

Valmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

Heavy Class Steel Pole - Octagonal Heavy Class pole heights 6m to 10.5m. References:Manufacturer's Drawings T36-LP-08-02-01 (6m),T36-LP-08-02-02 (7.5m), T36-LP-08-02-03 (9m),T36-LP-08-02-04 (10.5m).

Heavy Class Steel Pole - Round Heavy Class pole heights 6m to 10.5m. References:Manufacturer's Drawings T36-LP-0T-03-01 (6m),T36-LP-0T-03-02 (7.5m), T36-LP-0T-03-03 (9m),T36-LP-0T-03-04 (10.5m).

Heavy Class Sectional Steel Pole - One piece section Valmont Section - Max Poles: Pole heights 6.0 m to10.5 m, Valmont Series SM-8920 ( 6.0 M ), SM-8925 (7.5 m ), SM-8930 ( 9.0 m ), SM-8935H ( 10.5 M )

Electrical List # 6.60.85Poles Page 1 of 1Heavy Class - Base Mounted - Steel, Sectional Steel Date: 04-Apr-2017

SPECIFICATIONS: OPSS 2422DRAWINGS: MTOD 2433.0100, MTOD 2433.0110, MTOD

2435.0100, MTOD 2435.0200CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 228: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 229: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Wood TreatmentsStella-Jones Inc., DBA Guelph UtilityPolePO Box 154, RR #5Guelph ON N1H 6J2CanadaTel: 519-822-3901Fax: 519-822-5411Email: [email protected]: www.guelphpole.com

Pentachlorophenol (Penta)

Electrical List # 6.60.90Poles Page 1 of 1Wood Date: 01-Dec-2017

SPECIFICATIONS: OPSS 615, OPSS 2420DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 230: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 231: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Catalogue NoB & M Manufacturing Inc.165 Huron Rd, PO Box 1059Mitchell ON N0K 1N0Tel: 519-348-4410Fax: 519-348-4423Email: [email protected]: www.bmgrp.ca

Type 1 - 120/240V, 100Amp, 1 Phase, 3-Wire MTOD-01

Type 2 - 120/208V, 100 AMP, 3 Phase, 4-Wire MTOD-02

Type 3 - 120/240V, 100Amp, 1-Phase, 3-Wire MTOD-03

Pole Mounting Bracket

Blenkhorn and Sawle Limited

Pole Mounting Bracket

Canada Dynamic Inc.

Concord Prefab Inc

Pole Mounting Bracket

Custom Control Panels Inc1686 Mattawa AvenueMississauga ON L4X 1K2CanadaTel: 905-279-6271Fax: 905-279-6564Email: [email protected]: www.cuscon.com

Type 1- 120/240 Volt, 100 Amp, 1 Phase, 3-Wire

Type 2 - 120/208 Volt, 100 Amp, 3 Phase, 4-Wire

Type 3 - 120/240V, 100Amp, 1 Phase, 3-Wire

Pole Mounting Bracket

Cutler-Hammer3228 South Service Road, Box 5040Sta ABurlington ON L7R 3Y8CanadaTel: 905-333-6442Fax: 905-631-4248Web: www.cutler-hammer.com

Type 1- 120/240 Volt, 100 Amp, 1 Phase, 3-Wire P1B3C1-SCC1

Type 2 - 120/208V, 100 AMP, 3 Phase, 4-Wire P1B3C1-SCC1

Type 3 - 120/240V, 100Amp, 1 Phase, 3-Wire

Cover Plate and Flasher

Pole Mounting Bracket MTO341810-012

Electrical List # 6.65.20Power Supply Page 1 of 1Assemblers of Control Cabinet Assemblies Date: 01-Feb-2013

SPECIFICATIONS: OPSS 2414DRAWINGS: OPSD 2440.0500, OPSD 2440.0600, MTOD

2440.0100, MTOD 2440.0200, MTOD 2441.0000, MTOD2441.0100, MTOD 2441.0200, MTOD 2440.0400(Replaces OPSD 2440.0400), MTOD 2440.02100

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 232: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 233: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Material Requirement Catalogue No Product Grade / TypeB & M Manufacturing Inc.165 Huron Rd, PO Box 1059Mitchell ON N0K 1N0Tel: 519-348-4410Fax: 519-348-4423Email: [email protected]: www.bmgrp.ca

Stainless Steel B&M MTO 114 Type 1

Cold-rolled Steel B&M MTO 215 Type 1

Bel Products Inc.6868 Maurice Duplessis BlvdMontreal QC H1G 1Z6CanadaTel: 514-327-2800Fax: 514-327-3250Toll free: 800-470-4629Email: [email protected]: www.belproducts.com

Ontario Source:Ontech Electrical Sales Ltd.

Stainless Steel H201606FSS Type 1

Blenkhorn and Sawle Limited Stainless Steel B&S 308SS

Concord Prefab Inc Stainless Steel 2440.01 Type 1

Hammond Manufacturing Ltd. Stainless Steel 2014 N4SS C6 Type 1

Ralston Metal Products Ltd. Stainless Steel 4X-SS-20166 Type 1

Electrical List # 6.65.22Power Supply Page 1 of 1Enclosure for Control Cabinet Date: 01-Feb-2013

SPECIFICATIONS: OPSS 2414DRAWINGS: OPSD 2440.0500, OPSD 2440.0600, MTOD

2440.0300, MTOD 2441.0100, MTOD 2441.0200, MTOD2440.0510, MTOD 2440.0610, MTOD 2441.0300

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 234: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 235: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Catalogue No Product Categoric Use IdentifierCooper Power Systems

Ontario Source:Bel Volt Sales Ltd.

ASZ650B2 2-Pole

ASZ650B3 3-Pole

Joslyn Manufacturing Co.

Canadian Source:Grafton Utility Supply Ltd.

J9200-8A 2-Pole

J9200-9A 3-Pole

Electrical List # 6.65.25Power Supply Page 1 of 1Surge Arrestor Date: 01-Jun-2009

SPECIFICATIONS: OPSS 2414DRAWINGS: MTOD 2440.0100, MTOD 2440.0200, MTOD

2441.0000, MTOD 2440.0210CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 236: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 237: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Distribution AssemblyB & M Manufacturing Inc.165 Huron Rd, PO Box 1059Mitchell ON N0K 1N0Tel: 519-348-4410Fax: 519-348-4423Email: [email protected]: www.bmgrp.ca

Blenkhorn and Sawle Limited

Canada Dynamic Inc.

Commercial Switchgear Ltd.

Concord Prefab Inc

Custom Control Panels Inc1686 Mattawa AvenueMississauga ON L4X 1K2CanadaTel: 905-279-6271Fax: 905-279-6564Email: [email protected]: www.cuscon.com

Electrical List # 6.65.40Power Supply Page 1 of 1Distribution Assembly Date: 03-Feb-2014

SPECIFICATIONS: OPSS 2414DRAWINGS: OPSD 2126.0100, OPSD 2126.0200, OPSD

2400.0000, OPSD 2400.0100, OPSD 2400.0200, OPSD2400.0300, OPSD 2400.1000

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 238: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 239: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalPower SupplyL-Handles, Surface Mounted, Padlockable

DSM # 6.65.45Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 2480DRAWINGS: MTOD 2480.M1, MTOD 2480.M2, MTOD 2480.M3, MTOD 2480.M4CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

NOTE:Product shall be stainless steel with threaded shank, blind mount escutcheon and o-ring and gasket.No Listings

Page 240: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 241: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalPower SupplySubstation Distribution Assembly

DSM # 6.65.75Page 1

Date: 01-May-2003

SPECIFICATIONS: OPSS 614DRAWINGS:CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

CompanyBlenkhorn and Sawle Limited100 Grantham Avenue South, P.O. Box 3010St. Catharines ON L2R 7B9Tel: 905-684-9251Fax: 905-684-3336Toll free: 800-263-6570Email: [email protected]: www.blenksawle.comCanada Dynamic Inc.Commercial Switchgear Ltd.Concord Prefab Inc163 Jardin DriveConcord ON L4K 1X5Tel: 905-669-1630Fax: 905-669-9728

Page 242: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 243: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Control Type Product ModelHorizon Signal Technologies, Inc.5 Corporate Blvd.Reading PA 19608United StatesTel: 800-852-8796Fax: 610-791-3458Web: www.horizonsignal.com

Ontario Source:Horizon Signal Technologies ofCanada27-200 Fitch StreetWelland ON L3C 4V9CanadaTel: 800-852-8796Fax: 610-687-5123Email: [email protected]: www.horizonsignal.com

FIXED TIME OPERATION SQ3TS

ACTUATED OPERATION SQ3TS

John Thomas Inc1560 Lovett DriveDixon IL 61021United StatesTel: 888 447 7263Fax: 888 335 3948Email:[email protected]

FIXED TIME OPERATION ADDCO PTS-2000 w/Galaxy™ Operating System

ACTUATED OPERATION ADDCO PTS-2000 w/Galaxy™ Operating System

North America Traffic Inc.7 Petersburg CirclePort Colborne ON L3K 5V5CanadaTel: 905-835-0800Fax: 905-835-0453Toll Free: 877-352-4626Web: www.northamericatraffic.com

FIXED TIME OPERATION PTL 2.4

ACTUATED OPERATION PTL 2.4

Tower Sign and Signal Inc

Distributor:Ontario Barrier Wall Ltd71 Steinway BlvdEtobicoke ON M9W 6H6Tel: 416-640-1442Fax: 416-674-8660Toll Free: 800-265-6125Email: [email protected]

FIXED TIME OPERATION SX-7500 (without countdown timer)

ACTUATED OPERATION SX-7500 (without countdown timer)

Ver-mac Inc.1781 Bresse St.,Ste-Foy QC G2G 2V2Tel: 418-654-1303Fax: 418-654-0517Toll Free: 888-488-7446Web: www.ver-mac.com

FIXED TIME OPERATION TLD-3612

ACTUATED OPERATION TLD-3612

Electrical List # 6.70.60Traffic Electronic Control Equipment Page 1 of 1Traffic Signals, Portable, Temporary Date: 01-Jun-2017

SPECIFICATIONS: Contract DocumentsDRAWINGS: Contract DocumentsCUSTODIAL OFFICE : Traffic Operations & Engineering - (905) 704-2960

Page 244: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 245: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Model Categoric UseDistributor:Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

Optical Detector 2090 SD

Optical Processor 2070 OSP

Ontario Source:Global Traffic Technologies Canada,Inc.157 Adelaide Street West, Suite 448Toronto ON M5H 4E7Tel: (800) 258-4610Email: [email protected]: www.gtt.com

3M Model 205 Applicable to Cable, Low Voltage,Pre-emption, DSM 6.05.17

Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Optical Detector 301 Applicable to Cable, Low Voltage,Pre-emption, DSM 6.05.17

Optical Detector 302 Applicable to Cable, Low Voltage,Pre-emption, DSM 6.05.17

Electrical List # 6.80.15Traffic Signal Actuation Equipment/Materials Page 1 of 1Detector, Emergency Vehicle Pre-emption ** Date: 04-Apr-2017

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 246: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 247: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Notes regarding restrictions on use:(A) Cold pressure pumped for use at temperatures greater than 20 degrees Celsius, except as indicated below under "Qualified Use".(B) Cold pressure pumped two component polyurethane for use at temperatures greater than 20 degrees Celsius, except as indicated below under"Qualified Use".(C) Two part ( powder and liquid ) that is mixed and then poured into saw cut. For use at temperatures greater than 0 degrees Celsius(D) Sealant shall not be used when loops are to be installed in binder course prior to placement of the top course of pavement over the loops.(E) Hot poured sealant is permitted for use only when the ambient temperature is 0 degrees Celsius or less and therefore below the minimum ambienttemperature specified for the use of "cold" sealants.

Company Product Name Model Notes Qualified Use3M Canada - Traffic Safety andSecurity Systems Division300 Tartan Drive PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

Detector Loop Sealant5000

DLS 5000 A Cold pressure pumped foruse at ambienttemperatures greater than20 degrees Celsius

BASF Canada Inc.100 Milverton Dr., 5th FloorMississauga ON L5R 4H1Tel: 289-360-6174Fax: 289-360-6004Toll Free: 800-268-9920Web: www.basf.com

Ontario Source:National Concrete Accessories172 Bethridge RoadToronto ON M9W 1N3CanadaTel: 416-245-4720Fax: 416-242-2727Web:www.nca.ca/nca/products/default.aspOntario Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Sealant - Two part GoldLabel All Season LoopSealant

Master Seal SL 180 C Two part ( powder andliquid ) that is mixed andthen poured into saw cut.For use at ambienttemperatures greater than0 degrees Celsius

Electrical List # 6.80.20Traffic Signal Actuation Equipment/Materials Page 1 of 2Detector, Loop, Sealant Date: 04-Apr-2017

SPECIFICATIONS: Manufacturer's Standards, SP 623F01DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 248: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Model Notes Qualified UseChemque Inc. Q-Seal 290S 290S Summer Grade A, D Summer Grade cold

pressure pumped singlecomponent polyurethanesealant for use at ambienttemperatures greater than20 degrees Celsius

Q-Seal 290W 290W Winter Grade A, D Winter Grade coldpressure pumped singlecomponent polyurethanesealant for use at ambienttemperatures greater than0 degrees Celsius

Q-Seal 295M 295M Winter Grade B Winter Grade twocomponent polyurethanesealant for use at ambienttemperatures greater than0 degrees Celsius

Q-Seal 295S 295S Summer Grade B Summer Grade twocomponent polyurethanesealant for use at ambienttemperatures greater than20 degrees Celsius

McAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

Beram 190 Beram 190 D, E Single component hotpoured sealing compoundfor use at ambienttemperatures greater thanminus 18 degrees Celsiusand less than or equal to0 degrees Celsius

Electrical List # 6.80.20Traffic Signal Actuation Equipment/Materials Page 2 of 2Detector, Loop, Sealant Date: 04-Apr-2017

SPECIFICATIONS: Manufacturer's Standards, SP 623F01DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 249: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Catalogue NoOntario Source:Global Traffic Technologies Canada,Inc.157 Adelaide Street West, Suite 448Toronto ON M5H 4E7Tel: (800) 258-4610Email: [email protected]: www.gtt.com

Microloop 701 78-8040-6415-8

Electrical List # 6.80.31Traffic Signal Actuation Equipment/Materials Page 1 of 1Detector, Probe Date: 04-Apr-2017

SPECIFICATIONS: Manufacturer's Standards, OPSS 623* (Withdrawn* Nov 2007, Incl in OPSS 620)DRAWINGS: OPSD 2521.0100 (Withdrawn* Nov 2007), OPSD

2521.0200 (Withdrawn* Nov 2007), OPSD 2521.0300(Withdrawn* Nov 2005)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 250: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 251: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product's Element Model Notes / RemarksCanadian Source:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

Video Detector - AutoscopeSolo Terra

Solo Terra Camera Part #ASOLOTERRA1

Video Detector - AutoscopeSolo Terra

Mounting Bracket Part # AMBKTM12

Video Detector - AutoscopeSolo Terra

Terra Interface Panel Part # ATIP1

Video Detector - AutoscopeSolo Terra

Terra Access Point Part # ATAPE

Video Detector - AutoscopeSolo Terra

Connecting Cable (TIP to TAP)for TS2 Type 1 Cabinets

Part # ASTCBL10

Video Detector - AutoscopeSolo Terra

Parallel I/O Cable for TS1Cabinets

Part # ASTCBL11

Video Detector - AutoscopeSolo Terra

Autoscope RackVision Terra Part #ARVTERRA1E

Video Detector - AutoscopeEncore

Encore MVP Sensor AENCORE

Video Camera - AutoscopeAIS -IV

Autoscope Image Sensor(AIS-IV). Video source forRackvision line

AIS4MCRZOOMU0S

Video Camera - AutoscopeAIS-V

Autoscope Image Sensor(AIS-V). Video source forRackVision line

AISVCRZOOMU0S

Video Detector - AutoscopeRackVision Pro 1

RackVision Pro 1 (RVP1) singlechannel MVP

ARVP1

Video Detector - AutoscopeRackVision Pro 2

RackVision Pro 2 (RVP2) dualchannel MVP

ARVP2

Video Detector - AutoscopeRackVision Terra

RackVision Terra singlechannel MVP

ARVTERRA1E

Autoscope Solo Pro II

Video Detector - AutoscopeSolo Terra

Solo Terra MVP Sensor ASOLOTERRA1

Autoscope TAP Terra Access Point for Encoreand Solo Terra

ATAPE

Autoscope TIP Terra Interface Panel forEncore and Solo Terra

ATIP1

Electrical List # 6.80.40Traffic Signal Actuation Equipment/Materials Page 1 of 4Detector, Vehicle Date: 02-Oct-2017

SPECIFICATIONS: Manufacturer's Standards, OPSS 623* (Withdrawn* Nov 2007, Incl in OPSS 620)DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 252: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product's Element Model Notes / RemarksCanadian Source:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

Autoscope Vision Autoscope Vision IntegratedVideo Sensor ( 3-Wires-Only )

AVISION Integrated videodetector that canprovide stop bardetection, bicycledetection, traffic datacollection, videomonitoring, andadvance vehicledetection up to 180 m (600 feet ) from theVision sensor

Ontario Source:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.caOntario Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Sensys, Access Point &Repeater Mounting Bracket(DLAP240M)

DLAP240M

Sensys, Access Box forAccess Point, CC Card &Computer (WirelessDLCCACC)

DLCCACC

Sensys, Access Point -Serial and EthernetCapability (DLAP240-ES)

DLAP240-ES

Sensys, Access Point -Serial Capability(DLAP240-S)

DLAP240-S

Sensys, Extension Card upto 4 Channels (170 or NEMA- DLEXTS1)

DLEXTS1

Sensys, Master Card up to 4Channels (170 or NEMA -DLMIB)

DLMIB

Sensys, Wireless Repeater(long life - DL240BL)

DL240BL

Sensys, Wireless Repeater(Standard Battery -DLRP240B)

DLRP240B

Sensys, Wireless Sensor forall Data & Stop BarDetection Applications(DLVSN240F)

DLVSN240F

Sensys, Wireless Sensor forStop Bar DetectionApplications (DLVSN240T)

DLVSN240T

Electrical List # 6.80.40Traffic Signal Actuation Equipment/Materials Page 2 of 4Detector, Vehicle Date: 02-Oct-2017

SPECIFICATIONS: Manufacturer's Standards, OPSS 623* (Withdrawn* Nov 2007, Incl in OPSS 620)DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 253: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product's Element Model Notes / RemarksOntario Source:Electromega Ltd.11-1155 North Service Rd W.Oakville ON L6M 3E3Tel: 800-663-7071Fax: 855-893-4087Office: 905-847-5458Email: [email protected]: www.electromega.com

Aldis GridSmart VideoDetection System

Aldis GridSmart VideoDetection System

Aldis GridSmart

Ontario Source:Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

Wavetronix SmartSensorMatrix

Radar Detector complete withsensor mount, junction box,power and communicationcables, back-panel (surge,communication, output)software and documentation

SmartSensor Matrix

Wavetronix SmartSensorAdvance

Radar Detector complete withsensor mount, junction box,power and communicationcables, back-panel (surge,communication, output)software and documentation

SmartSensorAdvance

Pending Approval

Ontario Source:GGI Road & TrafficP.O. Box 2182, Station BRichmond Hill AB L4E 1A4caTel: 416.849.2228Fax: 416.849.2271Email: [email protected]: www.thegetgoinc.com

Iteris SmartCycle videoprocessing

Iteris SmartCycle Iteris SmartCycle Video processing forvideo detection ofbicycles using the IterisRZ-4 Camera

Vantage Edge VideoDetection Processor

Vantage Edge Video DetectionProcessor

Vantage Edge VideoDetection Processor

Video processor forvideo detection ofvehicles using the IterisRZ-4 camera

Vantage EdgeConnect Vantage EdgeConnect VantageEdgeConnect

Communicationsmodule fortransmitting/streamingvideo

Iteris RZ4 Camera Iteris RZ4 Camera RZ4 WDR Camera Iteris Vantage RZ4WDR Camera forvehicle detection

Iteris Vantage Vector HybridSensor

Iteris Hybrid Video/RadarSensor

Iteris VantageVector HybridSensor

Hybrid Video/RadarSensor for both stopbar and advancedzone detection

MS Sedco

Canadian Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

Microwave Detector TC 26B

Electrical List # 6.80.40Traffic Signal Actuation Equipment/Materials Page 3 of 4Detector, Vehicle Date: 02-Oct-2017

SPECIFICATIONS: Manufacturer's Standards, OPSS 623* (Withdrawn* Nov 2007, Incl in OPSS 620)DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 254: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product's Element Model Notes / RemarksPeek Traffic Inc.

Ontario Source:Orange Traffic Inc. (Ontario Division)1011 Upper Middle Rd E Suite 1217Oakville ON L6H 5Z9CanadaTel: 647-833-4638Fax: 450-477-0047Email:[email protected]: www.orangetraffic.com/en

Video Detector - VideoTrakIQ

PEEK Video Detection Camera CAM82-1773

Video Detector - VideoTrakIQ

ITS Mounting Bracket BRATRIAXIS90

Video Detector - VideoTrakIQ

PEEK Camera Interface Panel PAN82-1661-XX

Video Detector - VideoTrakIQ

PEEK VideoTrak IQ Video Card1 to 2 Cameras

DET90-180-02

Video Detector - VideoTrakIQ

PEEK VideoTrak IQ Video Card1 to 4 Cameras

DET90-180-04

Video Detector - VideoTrakIQ

PEEK VideoTrak IQ HD15Input/Output Cable foradditional 8 Outputs and 4Inputs

HAR81-1274

Video Detector - VideoTrakIQ

PEEK VideoTrak IQ ExtenderCard 2 Channel

DET82-1827

Video Detector - VideoTrakIQ

PEEK VideoTrak IQ ExtenderCard 4 Channel

DET82-1828

Canadian Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Video Detector - TrafiCam 1TI Interface Assembly - SingleCamera; Four Output

CATC1TI

Video Detector - TrafiCam 4TI Interface Assembly - Up to4 Cameras; 16 Outputs

CATC4TI

Video Detector - TrafiCam TrafiCam II Camera - 2.1mmLens (Wide Angle)

Video Detector - TrafiCam TrafiCam II Camera - 6.0 mmLens (Narrow Angle)

Electrical List # 6.80.40Traffic Signal Actuation Equipment/Materials Page 4 of 4Detector, Vehicle Date: 02-Oct-2017

SPECIFICATIONS: Manufacturer's Standards, OPSS 623* (Withdrawn* Nov 2007, Incl in OPSS 620)DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 255: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Catalogue No Product Type Categoric UseDescription

Product Notes

Canadian Source:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

Curved Back E3951G3Y Type A Mountable on WoodPoles

Flat Back E3951G5Y Type B Mountable on MetalPoles

General Traffic Equipment Corp

Canadian Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Curved Back PB-3-1000 Type A Mountable on WoodPoles

Flat Back PB-3-1000(APB-3) Type B Mountable on MetalPoles

Ontario Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Bulldog IIIPedestrianPushbuttons -Momentary

Colour: BDSP-014-Y( Yellow )BDSP-014-B ( Black), BDSP-014-G (Green ), Mounting:APBC-Y, APBC-B,APBC-G, BDPM-Y,BDPM-B, BDPM-G

Momentary Mountable on metalpoles and woodpoles

Security Option:TRS-1

Bulldog IIIPedestrianPushbuttons -Latching

Colour: BDL3-Y (Yellow ), BDL3-B (Black ), BDL3-G (Green ) Mounting:APBC-Y, APBC-B,APBC-G, BDPM-Y,BDPM-B, BDPM-GLatching: PBCU,PBCU-EB

Latching Mountable on metalpoles and woodpoles

Security Option:TRS-1

Traffic Signal Hardware Inc

Canadian Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Curved Back TSH8108 Type A Mountable on WoodPoles

Flat Back TSH8130 Type B Mountable on MetalPoles

Flat Back TSH8101 Type B Mountable on MetalPoles

TSH8108 Type C PushbuttonComplete with aSign Frame

TSH8101 Type C PushbuttonComplete with aSign Frame

Electrical List # 6.80.60Traffic Signal Actuation Equipment/Materials Page 1 of 1Pushbuttons, Pedestrian Date: 01-Feb-2013

SPECIFICATIONS: Manufacturer's Standards, OPSS 623 (Withdrawn, Replaced by OPSS 620)DRAWINGS: OPSD 2552.0100CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 256: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 257: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Model Product Attribute Categoric UseEagle Traffic Control Systems,ofSiemens Energy & Automation Inc

Canadian Source:Electromega Ltd.760 Pacific Rd. Unit 15Oakville ON L6L 6M5caTel: 800-663-7071Fax: 855-893-4087Office: 905-847-5458Email: [email protected]: www.electromega.com

Aluminum Flasher Beacon

Polycarbonate Flasher Beacon

Mark IV Aluminum Flasher Beacon

Mark IV Polycarbonate Flasher Beacon

Mark IV Aluminum Pedestrian Head

Mark IV Polycarbonate Pedestrian Head

Distributor:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

Aluminum Flasher Beacon

Polycarbonate Flasher Beacon

Polycarbonate Pedestrian Head

Aluminum Pedestrian Head

Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

Aluminum Flasher Beacon

Polycarbonate Flasher Beacon

Aluminum Pedestrian Head

Polycarbonate Pedestrian Head

Peek Traffic Inc.

Ontario Source:Orange Traffic Inc. (Ontario Division)1011 Upper Middle Rd E Suite 1217Oakville ON L6H 5Z9caTel: 647-833-4638Fax: 450-477-0047Email:[email protected]: www.orangetraffic.com/en

Peek Pedestrian Signal Head Polycarbonate Pedestrian Head

Electrical List # 6.85.25Traffic Signal/Flasher Equipment Page 1 of 1Flasher Beacon and Pedestrian Signal Heads Date: 03-Oct-2016

SPECIFICATIONS: OPSS 620*, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2505.0100, OPSD 2532.0100, OPSD

2536.0100, OPSD 2540.0200, OPSD 2540.0300CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 258: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 259: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Electrical Traffic Signal/Flasher Equipment Flasher Beacon, Solar Powered

DSM # 6.85.27Page 1

Date: 01-Mar-2007 SPECIFICATIONS: Contract Documents, Manufacturer's Specifications DRAWINGS: Contract Documents, Manufacturer's Drawings CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Name Product Model Product Notes

Single, Dual ( Alternating ), Three, and Four Way Red Flashers, 200mm and 300mm

ABS08R1, ABS08R2, ABS08R3, ABS08R4, ABS12R1, ABS12R2, ABS12R3, ABS12R4

Single and Dual Alternating Amber Flashers, 200mm and 300mm

ABS08A1, ABS08A2, ABS12A1, ABS12A2

Combination Red and Amber Flashers, 200mm and 300mm

ABS08R108A2, ABS08R208A2, ABS12R108A2, ABS12R208A2

Amber Flasher with Timer, 200mm and 300mm

ABS08A1T, ABS08A2T, ABS12A1T, ABS12A2T

Solar Signals 556 O'Connor Drive, Kingston ON K7P 1N3 Tel: 613-634-9116 Fax: 514-630-8938 Office: 514-695-1546 Homepage: www.solarsignals.com

LED sign Downlight L24W

Page 260: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 261: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Catalogue No Categoric UseDescription

Product Notes Categoric Uses

Olson Pattern and Foundry WorksInc

Canadian Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Universal Hanger Sky Bracket

Pelco Products Inc

Distributor:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

Universal Hanger Astro-Brac

Sentinel Pole & Traffic EquipmentLtd.375 Admiral Blvd Unit 3Mississauga ON L5T 2N1CanadaTel: 905-564-2929Fax: 905-564-0755

UniversalVersia-Brac

VSB-300T Use with 3 SectionHead

UniversalVersia-Brac

VSB-400T Use with 4 SectionHead

UniversalVersia-Brac

VSB-500T Use with 5 SectionHead

AdjustablePlumbizer

AP 42830

Electrical List # 6.85.35Traffic Signal/Flasher Equipment Page 1 of 1Hanger Assembly Date: 01-Jun-2012

SPECIFICATIONS: OPSS 2460, SP 620S04 (Replaces OPSS 620, Sep 1984 for MTO Contracts)DRAWINGS: MTOD 2524.0100, Manufacturer's Drawings, OPSD

2502.0100CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 262: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 263: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product Grade / Type Categoric Use DescriptionDuro-Test Canada Inc. 645 A - Incandescent, clear, 100 Watt, 1000 Lumens,

8000 Hours life, 113 mm overall length and 62 mmlight centre length.

For Green and Amber 200 mmlens TS Head

400 C - Incandescent, clear, 100 Watt, 1000 Lumens,8000 Hours life, 121 mm overall length and 75 mmlight centre length.

For Green Turn Arrow 300 mmLens TS and Square PS Head

291 E - Incandescent, clear, 69 Watt, 665 Lumens,8000 Hours life, 113 mm overall length and 62 mmlight centre length.

For Flasher Beacons Amber200 mm Lens

756 F - Incandescent, Krypton Fill Gas, 120/125 Volt,Clear, 90 Watt, AT19 Bulb, 1040 Lumens, 8000Hours life, Filament C-11V, 113 mm overall lengthand 62 mm light centre length.

For Green and Amber 200 mmlens TS Head

759 G - Incandescent, Krypton Fill Gas, 120/125 Volt,Clear, 90 Watt, AT19 Bulb, 1040 Lumens, 8000Hours life, Filament C-11V, 121 mm overall lengthand 75 mm light centre length.

For Green Turn Arrow 300 mmLens TS and Square PS Head

764 H - Incandescent, Krypton Fill Gas, 120/125 Volt,Clear, 135 Watt, AT21 Bulb, 1750 Lumens, 8000Hours life, Filament C-11V, 121 mm overall lengthand 75 mm light centre length.

For Red 300 mm HighwayHead

Osram Sylvania Ltd. 100A21/TS 125 Volt A - Incandescent, clear, 100 Watt, 1000 Lumens,8000 Hours life, 113 mm overall length and 62 mmlight centre length.

For Green and Amber 200 mmlens TS Head

1950L/P25/6M 125 Volt B - Incandescent, clear, 150 Watt, 1950 Lumens,6000 Hours life, 121 mm overall length and 75 mmlight centre length.

For Red 300 mm HighwayHead

150PS25/99 125 Volt D - Incandescent, clear, 150 Watt, 2300 Lumens,2500 Hours life, 160 mm overall length and 133mm light centre length.

For Downlight

69A21/TS/8M 130 Volt E - Incandescent, clear, 69 Watt, 665 Lumens,8000 Hours life, 113 mm overall length and 62 mmlight centre length.

For Flasher Beacons Amber200 mm Lens

90A19TS/8MSS 125Volt

F - Incandescent, Krypton Fill Gas, 120/125 Volt,Clear, 90 Watt, AT19 Bulb, 1040 Lumens, 8000Hours life, Filament C-11V, 113 mm overall lengthand 62 mm light centre length.

For Green and Amber 200 mmlens TS Head

Philips Electronics Ltd.

Ontario Source:Wesco Distribution

1950L/TS/6M 125 Volt B - Incandescent, clear, 150 Watt, 1950 Lumens,6000 Hours life, 121 mm overall length and 75 mmlight centre length.

For Red 300 mm HighwayHead

69 A21/TS/8M 130 Volt E - Incandescent, clear, 69 Watt, 665 Lumens,8000 Hours life, 113 mm overall length and 62 mmlight centre length.

For Flasher Beacons Amber200 mm Lens

Electrical List # 6.85.45Traffic Signal/Flasher Equipment Page 1 of 1Lamps Date: 01-Feb-2017

SPECIFICATIONS: OPSS 620*, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620)DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 264: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 265: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name LED Type (Vehicle Signals) LED Type (PedestrianSignals)

Dialight Corporation

Ontario Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

Dialight Vehicle Arrow Module (Accepted),Vehicle Circular Module (Accepted)

Pedestrian Module (Accepted)

Excellence Opto. Inc.

Distributor:Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

Traffic Signals 300mm Incandescent Look ( AmberGreen) Arrow Module

Traffic Signals 300mm Incandescent Look (AmberGreen) Bi-Color Arrow Module

Traffic Signals 300mm Incandescent Look (RedAmber Green) Modules

Traffic Signals 300mm Square PedestrianModules, Orange for Hand, Whitefor Man

Traffic Signals 200mm Incandescent Look circular(Red Green Amber ) Modules

GE Lighting Systems Inc

GELcore

Ontario Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

GELcore Vehicle Arrow Module (Accepted),Vehicle Circular Module (Accepted)

Pedestrian Module (Accepted)

GE GTX 300mm Red LED Module(DR6-RTFB-77A)

300 mm Red LED Signal Module

GE GTX 300mm Red LED Module- Clear Lens (DR6-RCFB-77A)

300 mm Red LED Signal Module

Leotek Electronics USA Corp.

Ontario Source:Electromega Ltd.760 Pacific Rd. Unit 15Oakville Ontario L6L 6M5Tel: 800-663-7071Fax: 905-847-6789Office: 905-847-5458Email: [email protected]: www.electromega.com

Leotek Vehicle Arrow Module (Accepted),Vehicle Circular Module (Accepted)

Pedestrian Module (Accepted)

Electrical List # 6.85.47Traffic Signal/Flasher Equipment Page 1 of 2LED Lamps (Signal Modules) Date: 01-Dec-2014

SPECIFICATIONS: Contract Documents, SP 620S04 (Replaces OPSS 620, Sep 1984 for MTO)DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 266: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name LED Type (Vehicle Signals) LED Type (PedestrianSignals)

Swarco Industries Inc.

Distributor:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

Swarco Vehicle Arrow Module ( NotAccepted), Vehicle Circular Module(Accepted)

Pedestrian Module (Not Accepted)

TraStar Inc. - Duralight

Canadian Source:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

Duralight Vehicle Module ( Accepted )TraStar - DURALIGHT LED 300mm(12inch) incandescent look VehicleCircular Modules (Red AmberGreen)

N/A

Duralight Vehicle Module ( Accepted )TraStar - DURALIGHT LED 200mm(8inch) incandescent look VehicleCircular Modules (Red AmberGreen)

N/A

Duralight Vehicle Arrow Module ( Accepted )TraStar - DURALIGHT LED 300mm(12inch) incandescent look VehicleArrow Modules (Amber Green)

N/A

Duralight Vehicle Arrow Module ( Accepted )TraStar - DURALIGHT LED 300mm(12inch) Bi-modal Vehicle ArrowModule (Amber-Green combined)

N/A

Duralight N/A Pedestrian Module ( Accepted )TraStar - DURALIGHT LED SquarePED Canadian 300mmx300mm(12"x12") Pedestrian SquareModule

Electrical List # 6.85.47Traffic Signal/Flasher Equipment Page 2 of 2LED Lamps (Signal Modules) Date: 01-Dec-2014

SPECIFICATIONS: Contract Documents, SP 620S04 (Replaces OPSS 620, Sep 1984 for MTO)DRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 267: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

ElectricalTraffic Signal/Flasher EquipmentSignal Arm, Overbrace

DSM # 6.85.70Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 2460, OPSS 620DRAWINGS: OPSD 2500.0200CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Model Overbrace Length (metres)R2-JA 0.6R4-JA 1.2R6-JA 1.8RB8-JA 2.4B10-JA 3.0RB12-JA 3.6RB14-JA 4.3

Emergi-Lite/Powerlite Inc24 Vulcan StRexdale ON M9W 4M9Tel: 416-247-0590Fax: 905-567-9438Toll Free: 800-263-2301Homepage: emergi-lite.com and powerlite-inc.com

Ontario Source:Sentinel Pole & Traffic Equipment Ltd.375 Admiral Blvd Unit 3Mississauga ON L5T 2N1Tel: 905-564-2929Fax: 905-564-0755Other Tel: Tor (416) 460-7440

RB16-JA 4.9

Page 268: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 269: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Model Signal Arm Length (metres)Ewing Traffic & Lighting Products1445 Hopkins StreetWhitby ON L1N 2C2Tel: 905-666-5600Fax: 905-666-5646Toll free: 800-268-3524Web: www.ewinggroup.com

TR4-SMA 1.2

TR6-SMA 1.8

TR8-SMA 2.4

TR10-SMA 3.0

TR12-SMA 3.6

TR15-SMA 4.6

TR18-SMA 5.5

TR20-SMA 6.1

TR22-SMA 6.7

Metal Pole-Lite Inc.405 St-LouisSaint-Jean-sur-Richelieu QC J3B 1Y6Tel: 450-741-7144Fax: 450-741-7145Email: [email protected]: www.polelite.com

TSA 4 1.2

TSA 6 1.8

TSA 8 2.4

TSA 10 3.0

TSA 12 3.6

TSA 15 4.6

TSA 18 5.5

TSA 20 6.1

TSA 22 6.7

TSA 25 7.6

Electrical List # 6.85.75Traffic Signal/Flasher Equipment Page 1 of 2Signal Arm, Single Member Date: 01-Dec-2017

SPECIFICATIONS: OPSS 620, OPSS 2460DRAWINGS: OPSD 2501.0100, OPSD 2501.0200CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 270: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Model Signal Arm Length (metres)Thomas & Betts Limited

Ontario Source:Sentinel Pole & Traffic EquipmentLimited375 Admiral Blvd Unit 3Mississauga ON L5T 2N1Tel: 905-564-2929Fax: 905-564-0755Web: www.sentineltraffic.com

TR4SMA 1.2

TR6SMA 1.8

TR8SMA 2.4

TR10SMA 3.0

TR12SMA 3.6

TR15SMA 4.6

TR18SMA 5.5

TR20SMA 6.1

TR22SMA 6.7

TR25SMA 7.6

Valmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

RTA 4 1.2

RTA 6 1.8

RTA 8 2.4

RTA 10 3.0

RTA 12 3.6

RTA 15 4.6

RTA 18 5.5

RTA 20 6.1

RTA 22 6.7

Electrical List # 6.85.75Traffic Signal/Flasher Equipment Page 2 of 2Signal Arm, Single Member Date: 01-Dec-2017

SPECIFICATIONS: OPSS 620, OPSS 2460DRAWINGS: OPSD 2501.0100, OPSD 2501.0200CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 271: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Electrical Traffic Signal/Flasher Equipment Signal Control, Flasher Complete Mechanism Assembly

DSM # 6.85.80Page 1

Date: 01-Mar-2007 SPECIFICATIONS: OPSS 621, Manufacturer's Standards DRAWINGS: Manufacturer's Drawings CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Model Product Notes

EP100E-HT120-EL220 Single Circuit, Four Pin, Plug in Flasher Unit with Solid State Circuitry and Fuse Circuit Protection, Housed in a Weatherproof Enclosure with Load Rating of 20 Amps.

Eagle Traffic Control Systems,of Siemens Energy & Automation Inc Canadian Source: Tacel Ltd 179 Bartley Dr., Unit B Toronto ON M4A 1E8 Tel: 416-750-4646 Fax: 416-750-4649 Toll Free: 877-750-4646 Email: [email protected] Homepage: www.tacel.ca

EP100F-HT130-EL220 Double Circuit, Four Pin, Plug in Flasher Unit with Solid State Circuitry and Fuse Circuit Protection, Housed in a Weatherproof Enclosure with Load Rating of 15 Amps.

C00245G001 Single Circuit, Four Pin, Plug in Flasher Unit with Solid State Circuitry and Circuit Breaker Protection, Housed in a Weatherproof Enclosure with Load Rating of 20 Amps.

Distributor: Econolite Canada Inc. 110 Travail Road, Markham ON L3S 3J1 Tel: 800-661-7226 Fax: 905-294-2338 Email: [email protected] Homepage: www.econolite.ca

C00245G002 Double Circuit, Four Pin, Plug in Flasher Unit with Solid State Circuitry and Circuit Breaker Protection, Housed in a Weatherproof Enclosure with Load Rating of 20 Amps.

Fortran # FLA231 Single Circuit, Four Pin, Plug in Flasher Unit with Solid State Circuitry and Circuit Breaker Protection, Housed in a Weatherproof Enclosure with Load Rating of 10 Amps.

Fortran # FLA232 Double Circuit, Four Pin, Plug in Flasher Unit with Solid State Circuitry and Circuit Breaker Protection, Housed in a Weatherproof Enclosure with Load Rating of 10 Amps.

TF-21Z-T91-SSF101 Single Circuit, Four Pin, Plug in Flasher Unit with Mechanical Circuitry and Circuit Breaker Protection, Housed in a Weatherproof Enclosure with Load Rating of 10 Amps.

Fortran Traffic Systems Limited 470 Midwest Road Toronto ON M1P 4Y5 Tel: 416-288-1320 Fax: 416-288-9914 Toll Free: 1 800 387-4555 Email: [email protected] Homepage: www.fortrantraffic.com

TF-22Z-T91-SSF102 Double Circuit, Four Pin, Plug in Flasher Unit with Mechanical Circuitry and Circuit Breaker Protection, Housed in a Weatherproof Enclosure with Load Rating of 10 Amps.

Tacel Ltd 179 Bartley Dr., Unit B Toronto ON M4A 1E8 Tel: 416-750-4646 Fax: 416-750-4649 Toll Free: 877-750-4646 Email: [email protected] Homepage: www.tacel.ca

FP 101 Double Circuit, Four Pin, Plug in Flasher Unit with Solid State Circuitry and Circuit Breaker Protection, Housed in a Weatherproof Enclosure with Load Rating of 10 Amps.

Page 272: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 273: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:The components included in this listing are to be used in the repair and/or maintenance of the flashers listed in DSM 6.85.80.

Company Product Identity Product Model Product NotesEagle Traffic Control Systems,ofSiemens Energy & Automation Inc

Canadian Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Single Circuit Panel EP100E

Double Circuit Panel EP100F

Weatherproof Enclosure EL220 All flashers are plug-in units

Single Circuit Solid State Flasher Unit HT120

Double Circuit Solid State Flasher Unit HT130

Distributor:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

Single Circuit Panel C00260G001

Double Circuit Panel C00260G002

Weatherproof Enclosure C00255P001 All flashers are plug-in units

Single Circuit Mechanical Flasher Unit 9462387G1

Double Circuit Mechanical Flasher Unit 9462387G2

Electromega Ltd. (Head Office)105 Avenue LiberteCandiac QC J5R 3X8CanadaTel: 450-635-1020Fax: 855-893-4087Toll Free: 800-363-7481Email: [email protected]: www.electomega.com

Ontario Source:Econolite Canada Inc.

Single Circuit Solid State Flasher Unit 2130E

Double Circuit Solid State Flasher Unit 2170E

Single Circuit Solid State Flasher Unit 9001

Double Circuit Solid State Flasher Unit 9002

Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

Single Circuit Panel 52836P1

Double Circuit Panel 52836P1

Weatherproof Enclosure 52837G1 All flashers are plug-in units

Single Circuit Solid State Flasher Unit 344V475

Double Circuit Solid State Flasher Unit 343V814

Single Circuit Mechanical Flasher Unit 56705G11

Double Circuit Mechanical Flasher Unit 56705G12

Electrical List # 6.85.81Traffic Signal/Flasher Equipment Page 1 of 2Signal Control, Flasher Mechanism Components Date: 01-Jun-2017

SPECIFICATIONS: Manufacturer's Standards, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620)DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 274: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product Model Product NotesTacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Double Circuit Panel FP 101 I

Weatherproof Enclosure 14107-F All flashers are plug-in units

Double Circuit Solid State Flasher Unit 204

Traffic Sensor Corp

Canadian Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Single Circuit Solid State Flasher Unit 2001-B

Double Circuit Solid State Flasher Unit 2002-B

Electrical List # 6.85.81Traffic Signal/Flasher Equipment Page 2 of 2Signal Control, Flasher Mechanism Components Date: 01-Jun-2017

SPECIFICATIONS: Manufacturer's Standards, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620)DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 275: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Electrical Traffic Signal/Flasher Equipment Signal Control, Specialty Flasher

DSM # 6.85.83Page 1

Date: 01-Mar-2007 SPECIFICATIONS: OPSS 621, Manufacturer's Standards DRAWINGS: Manufacturer's Drawings CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Model Product Notes

CF-1F Single Circuit Solid State Flasher Unit with Fuse Protection and Load Rating of 3 Amps. CF-2F Double Circuit Solid State Flasher Unit with Fuse Protection and Load Rating of 3

Amps. C00345P3 Single Circuit Solid State Flasher Unit with Fuse Protection and Load Rating of 3 Amps.

Traffic Sensor Corp Distributor: Econolite Canada Inc. 110 Travail Road, Markham ON L3S 3J1 Tel: 800-661-7226 Fax: 905-294-2338 Email: [email protected] Homepage: www.econolite.ca

C00345P4 Double Circuit Solid State Flasher Unit with Fuse Protection and Load Rating of 3 Amps.

Page 276: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 277: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Electrical Traffic Signal/Flasher Equipment Signal Head, Fibreoptic, Turn Arrow

DSM # 6.85.90Page 1

Date: 01-Jun-2007 SPECIFICATIONS: Manufacturer's Standards DRAWINGS: Manufacturer's Drawings CUSTODIAL OFFICE: Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Company Product Identity Product Model

Fibreoptic 2 Colour 300 mm Turn Arrow D5142 L National Sign and Signal Company Distributor: Econolite Canada Inc. 110 Travail Road, Markham ON L3S 3J1 Tel: 800-661-7226 Fax: 905-294-2338 Email: [email protected] Homepage: www.econolite.ca

Fibreoptic 2 Colour 300 mm Turn Arrow D5142 R

Page 278: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 279: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:All combinations of traffic signal heads not otherwise identified within shall be obtained from the sources listed.For typical Ministry (MTO) configurations, refer to OPSS 2001.07All polycarbonate signal heads shall be supplied with stainless steel hardware and 304 stainless steel reinforcing plate for use with the traffic signalhanger.

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

Eagle Traffic Control Systems,ofSiemens Energy & AutomationInc

Canadian Source:Electromega Ltd.11-1155 North Service Rd W.Oakville ON L6M 3E3Tel: 800-663-7071Fax: 855-893-4087Office: 905-847-5458Email: [email protected]: www.electromega.com

Traffic SignalHead

SIG104A2112YYY Head comprises an aluminum sectionwith four 12 inch ports mounted on ayellow (per SBAYDAU) backboard.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SIG122A2112YYY Head comprises an aluminum sectionwith two 12 inch and two 8 inch portsmounted on a yellow (per SBAYHAU)backboard.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SIG103A2112YYY Head comprises an aluminum sectionwith three 12 inch ports mounted on ayellow (per SBAYBAU) backboard.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SIG130A2112YYY Head comprises an aluminum sectionwith three 8 inch ports mounted on ayellow (per SBAYQAU) backboard.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SIG121A2112YYY Head comprises an aluminum sectionwith one 12 inch and two 8 inch portsmounted on a yellow (per SBAYAAU)backboard.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SIG101A2112YYY Head comprises an aluminum sectionwith one 12 inch port

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SIG103A1112YYY Head comprises a polycarbonate sectionwith three 12 inch ports mounted on ayellow (per SBPYBAU) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SIG130A1112YYY Head comprises a polycarbonate sectionwith three 8 inch ports mounted on ayellow (per SBPYQAU) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SIG121A1112YYY Head comprises a polycarbonate sectionwith one 12 inch and two 8 inch portsmounted on a yellow (per SBPYAAU)backboard, including stainless steelhardware and 304 stainless steelreinforcing plate for use with the trafficsignal hanger.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 1 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 280: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

Eagle Traffic Control Systems,ofSiemens Energy & AutomationInc

Canadian Source:Electromega Ltd.11-1155 North Service Rd W.Oakville ON L6M 3E3Tel: 800-663-7071Fax: 855-893-4087Office: 905-847-5458Email: [email protected]: www.electromega.com

Traffic SignalHead

SIG101A1112YYY Head comprises a polycarbonate sectionwith one 12 inch port

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SIG103A1112YYY Head comprises a polycarbonate sectionwith three 12 inch ports mounted on ayellow (per SBPYBAU) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SIG121A1112YYY Head comprises a polycarbonate sectionwith one 12 inch and two 8 inch portsmounted on a yellow front (perSBPYAAU) backboard that isgray-backed, including stainless steelhardware and 304 stainless steelreinforcing plate for use with the traffic

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SA103A1112YYY Head comprises a polycarbonate sectionwith three 12 inch ports mounted on ayellow (per SBPYBAU) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SA130A1112YYY Head comprises a polycarbonate sectionwith three 8 inch ports mounted on ayellow (per SBPYQAU) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SA121A1112YYY Head comprises a polycarbonate sectionwith one 12 inch port mounted on ayellow (per SBPYAAU) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Traffic SignalHead

SA101A1112YYY Head comprises a polycarbonate sectionwith three 12 inch ports

When Z is used in orderingautomatic traffic signal heads, thecolour Gray shall be specified.

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 2 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 281: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

Distributor:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

TA41Y3APCON Head comprises an aluminum sectionwith four 12 inch ports mounted on ayellow (per CGSB 505-101) backboard.

CA47Y3APCON

TA31Y3APCON

EA31Y3APCON

CA36Y3APCON

TA11Y3APCON

TP31Y3APCON

EP31Y3APCON

CP36Y3APCON

Distributor:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

TP11Y3APCON

TP31Y3APCON

CP36E3APCON

Backboard(H)

E1592P43

Backboard (J) E1588P41

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 3 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 282: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

52828G7Y Head comprises an aluminum sectionwith four 12 inch ports mounted on ayellow (per CGSB 505-101) backboard.

52764G7Y Head comprises an aluminum sectionwith two 12 inch and two 8 inch portsmounted on a yellow (per CGSB505-101) backboard.

52828G101Y Head comprises an aluminum sectionwith three 12 inch ports mounted on ayellow (per CGSB 505-101) backboard.

52761G1 Head comprises an aluminum sectionwith three 8 inch ports mounted on ayellow (per CGSB 505-101) backboard.

52764G101 Head comprises an aluminum sectionwith one 12 inch and two 8 inch portsmounted on a yellow (per CGSB505-101) backboard.

192A669G105

192A669G102

192A669G104

192A669G106

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 4 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 283: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

192A669G101

QPL321 Head comprises a polycarbonate sectionwith three 12 inch ports mounted on ayellow (per CGSB 505-101) backboard.

QPL311 Head comprises a polycarbonate sectionwith three 8 inch ports mounted on ayellow (per CGSB 505-101) backboard.

QPL334 Head comprises a polycarbonate sectionwith one 12 inch and two 8 inch portsmounted on a yellow (per CGSB505-101) backboard.

Traffic signalbackboard -HDPE

BSP Series -BSP2340,BSP1340,BSP5440,BSP6540,BSP3340,BSP3440,BSP7340,BSP1344,BSP3344,BSP3444,BSP5444,BSP6544

High density polyethylene traffic signalbackboard

Traffic SignalHead

P3LV400 Type 7 traffic signal head ( QPL 321polycarbonate housing ) with red, amber,and green arrow LED signal modules

See DSM 6.85.47 for LED signalmodules

Traffic SignalHead

P3LT400 Type 8A traffic signal head ( QPL 321polycarbonate housing ) with red, amber,and green arrow LED signal modules

See DSM 6.85.47 for LED signalmodules

Traffic SignalHead

P3LA400 Type 10A traffic signal head ( QPL 321polycarbonate housing ) with red, amber,and green arrow LED signal modules

See DSM 6.85.47 for LED signalmodules

Traffic SignalHead

P3LB400 Type 6 traffic signal head ( QPL 321polycarbonate housing ) with red, amber,and green arrow LED signal modules

See DSM 6.85.47 for LED signalmodules

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 5 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 284: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

Traffic SignalHead,

P3LE400 Type 9A traffic signal head ( QPL 321polycarbonate housing ) with red, amber,green, bi-modal arrow LED signalmodules

See DSM 6.85.47 for LED signalmodules

Traffic SignalHead

P3LF400 Type 5 traffic signal head ( QPL 321polycarbonate housing ) with red, amber,and green arrow LED signal modules

See DSM 6.85.47 for LED signalmodules

Traffic SignalHead,

P3LG400 Type 11A traffic signal head ( QPL 321polycarbonate housing ) with red, amber,green, green arrow LED signal modules

See DSM 6.85.47 for LED signalmodules

Traffic SignalHead

P3LH400 Traffic signal head ( QPL 321polycarbonate housing ) with red, amber,and green LED signal modules

See DSM 6.85.47 for LED signalmodules

Traffic SignalHead

P3LJ400 Type 2 traffic signal head ( QPL 321polycarbonate housing ) with red, amber,and green arrow LED signal modules

See DSM 6.85.47 for LED signalmodules

Traffic SignalHead

P3LK400 Type 3 traffic signal head ( QPL 321polycarbonate housing ) with red, amber,and green arrow LED signal modules

See DSM 6.85.47 for LED signalmodules

Traffic SignalHead

P3LL400 Type 1 traffic signal head ( QPL 321polycarbonate housing ) with red, amber,and green arrow LED signal modules

See DSM 6.85.47 for LED signalmodules

Traffic SignalHead

P3LT400 Type 4 traffic signal head ( QPL 321polycarbonate housing ) with red, amber,and green arrow LED signal modules

See DSM 6.85.47 for LED signalmodules

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 6 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 285: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

McCain Traffic Supply Inc.

Canadian Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

TA412PA MTO Head comprises an aluminum sectionwith four 12 inch ports mounted on ayellow (per CGSB 505-101) backboard.

CA412PA MTO Head comprises an aluminum sectionwith two 12 inch and two 8 inch portsmounted on a yellow (per CGSB505-101) backboard.

TA302PA MTO Head comprises an aluminum sectionwith three 12 inch ports mounted on ayellow (per CGSB 505-101) backboard.

EA302PA MTO Head comprises an aluminum sectionwith three 8 inch ports mounted on ayellow (per CGSB 505-101) backboard.

CA302PA MTO Head comprises an aluminum sectionwith one 12 inch and two 8 inch portsmounted on a yellow (per CGSB505-101) backboard.

TA102PA MTO Head comprises an aluminum sectionwith one 12 inch port mounted on ayellow (per CGSB 505-101) backboard.

TA405YSN1 Head comprises an aluminum sectionwith four 12 inch ports mounted on ayellow (per CGSB 505-101) backboard.

CA405YSN1 Head comprises an aluminum sectionwith two 12 inch and two 8 inch portsmounted on a yellow (per CGSB505-101) backboard.

TA305YSN1 Head comprises an aluminum sectionwith three 12 inch ports mounted on ayellow (per CGSB 505-101) backboard.

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 7 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 286: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

McCain Traffic Supply Inc.

Canadian Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

EA308YSN1 Head comprises an aluminum sectionwith three 8 inch ports mounted on ayellow (per CGSB 505-101) backboard.

CA305YSN1 Head comprises an aluminum sectionwith one 12 inch and two 8 inch portsmounted on a yellow (per CGSB505-101) backboard.

TA105YSN1 Head comprises an aluminum sectionwith one 12 inch port mounted on ayellow (per CGSB 505-101) backboard.

TP302PA MTO Head comprises a polycarbonate sectionwith three 12 inch ports mounted on ayellow (per CGSB 505-101) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

EP302PA MTO Head comprises a polycarbonate sectionwith three 8 inch ports mounted on ayellow (per CGSB 505-101) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

CP302PA MTO Head comprises a polycarbonate sectionwith one 12 inch and two 8 inch portsmounted on a yellow (per CGSB505-101) backboard, including stainlesssteel hardware and 304 stainless steelreinforcing plate for use with the trafficsignal hanger.

TP 102PA MTO Head comprises a polycarbonate sectionwith one 12 inch port mounted on ayellow (per CGSB 505-101) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

TP305YSN1 Head comprises a polycarbonate sectionwith three 12 inch ports mounted on ayellow (per CGSB 505-101) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

EP308YSN1 Head comprises a polycarbonate sectionwith three 8 inch ports mounted on ayellow (per CGSB 505-101) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 8 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 287: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

McCain Traffic Supply Inc.

Canadian Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

CP308YSN1 Head comprises a polycarbonate sectionwith one 12 inch and two 8 inch portsmounted on a yellow (per CGSB505-101) backboard, including stainlesssteel hardware and 304 stainless steelreinforcing plate for use with the trafficsignal hanger.

TP105YSN1 Head comprises a polycarbonate sectionwith one 12 inch port mounted on ayellow (per CGSB 505-101) backboard,including stainless steel hardware and304 stainless steel reinforcing plate foruse with the traffic signal hanger.

Peek Traffic Inc.

Ontario Source:Orange Traffic Inc. (OntarioDivision)1011 Upper Middle Rd E Suite1217Oakville ON L6H 5Z9CanadaTel: 647-833-4638Fax: 450-477-0047Email:[email protected]: www.orangetraffic.com/en

Traffic SignalBackboard,Aluminum

Catalog # BAC1XX Traffic Signal Backboard, Aluminum -Catalog # BAC1XX

Traffic SignalHead,Aluminum

Catalog #SIGHSB03B300

Traffic Signal Head, Aluminum "MTOHighway 3 x 12" - Catalog #SIGHSB03B300

Traffic SignalHead,Aluminum

Catalog #SIGKSB03B303

Traffic Signal Head, Aluminum "MTOHighway" - Catalog # SIGKSB03B303

Traffic SignalHead,Aluminum

Catalog #SIGTSB03B300

Traffic Signal Head, Aluminum "MTOStandard" - Catalog # SIGTSB03B300

Traffic SignalHead,Aluminum

Catalog #SIGKSB04B435

Traffic Signal Head, Aluminum "MTOTransit" - Catalog # SIGKSB04B435

Traffic SignalHead,Aluminum

Catalog #SIGHSB03B313

Traffic Signal Head, Aluminum "MTOType 1" - Catalog # SIGHSB03B313

Traffic SignalHead,Aluminum

Catalog #SIGKSB04B414

Traffic Signal Head, Aluminum "MTOType 10" - Catalog # SIGKSB04B414

Traffic SignalHead,Aluminum

Catalog #SIGHSB04B413

Traffic Signal Head, Aluminum "MTOType 10A" - Catalog # SIGHSB04B413

Traffic SignalHead,Aluminum

Catalog #SIGKSB04B406

Traffic Signal Head, Aluminum "MTOType 11" - Catalog # SIGKSB04B406

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 9 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 288: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

Peek Traffic Inc.

Ontario Source:Orange Traffic Inc. (OntarioDivision)1011 Upper Middle Rd E Suite 1217Oakville ON L6H 5Z9CanadaTel: 647-833-4638Fax: 450-477-0047Email:[email protected]: www.orangetraffic.com/en

Traffic SignalHead,Aluminum

Catalog #SIGKSB04B435

Traffic Signal Head, Aluminum "MTOType 11A" - Catalog # SIGKSB04B435

Traffic SignalHead,Aluminum

Catalog #SIGHSB03B310

Traffic Signal Head, Aluminum "MTOType 2" - Catalog # SIGHSB03B310

Traffic SignalHead,Aluminum

Catalog #SIGHSB03B301

Traffic Signal Head, Aluminum "MTOType 3" - Catalog # SIGHSB03B301

Traffic SignalHead,Aluminum

Catalog #SIGHSB04B421

Traffic Signal Head, Aluminum "MTOType 4" - Catalog # SIGHSB04B421

Traffic SignalHead,Aluminum

Catalog #SIGHSB04B401

Traffic Signal Head, Aluminum "MTOType 5" - Catalog # SIGHSB04B401

Traffic SignalHead,Aluminum

Catalog #SIGHSB04B432

Traffic Signal Head, Aluminum "MTOType 6" - Catalog # SIGHSB04B432

Traffic SignalHead,Aluminum

Catalog #SIGHSB05B512

Traffic Signal Head, Aluminum "MTOType 7" - Catalog # SIGHSB05B512

Traffic SignalHead,Aluminum

Catalog #SIGKSB05B515

Traffic Signal Head, Aluminum "MTOType 8" - Catalog # SIGKSB05B515

Traffic SignalHead,Aluminum

Catalog #SIGHSB05B502

Traffic Signal Head, Aluminum "MTOType 8A" - Catalog # SIGHSB05B502

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 10 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 289: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

Peek Traffic Inc.

Ontario Source:Orange Traffic Inc. (OntarioDivision)1011 Upper Middle Rd E Suite 1217Oakville ON L6H 5Z9CanadaTel: 647-833-4638Fax: 450-477-0047Email:[email protected]: www.orangetraffic.com/en

Traffic SignalHead,Aluminum

Catalog #SIGKSB04B437

Traffic Signal Head, Aluminum "MTOType 9" - Catalog # SIGKSB04B437

Traffic SignalHead,Aluminum

Catalog #SIGHSB04B413

Traffic Signal Head, Aluminum "MTOType 9A" - Catalog # SIGHSB04B413

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB03B300

Traffic Signal Head, Polycarbonate"MTO Highway 3 x 12" - Catalog #SIGPSB03B300

Traffic SignalHead,Polycarbonate

Catalog #SIGCSB03B303

Traffic Signal Head, Polycarbonate"MTO Highway" - Catalog #SIGCSB03B303

Traffic SignalHead,Polycarbonate

Catalog #SIGESB03B300

Traffic Signal Head, Polycarbonate"MTO Standard" - Catalog #SIGESB03B300

Traffic SignalHead,Polycarbonate

Catalog #SIGCSB04B435

Traffic Signal Head, Polycarbonate"MTO Transit" - Catalog #SIGCSB04B435

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB03B313

Traffic Signal Head, Polycarbonate"MTO Type 1" - Catalog #SIGPSB03B313

Traffic SignalHead,Polycarbonate

Catalog #SIGCSB04B414

Traffic Signal Head, Polycarbonate"MTO Type 10" - Catalog #SIGCSB04B414

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB04B413

Traffic Signal Head, Polycarbonate"MTO Type 10A" - Catalog #SIGPSB04B413

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 11 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 290: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Catalogue No Product Requirements Notes / Remarks

Peek Traffic Inc.

Ontario Source:Orange Traffic Inc. (OntarioDivision)1011 Upper Middle Rd E Suite 1217Oakville ON L6H 5Z9CanadaTel: 647-833-4638Fax: 450-477-0047Email:[email protected]: www.orangetraffic.com/en

Traffic SignalHead,Polycarbonate

Catalog #SIGCSB04B406

Traffic Signal Head, Polycarbonate"MTO Type 11" - Catalog #SIGCSB04B406

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB04B435

Traffic Signal Head, Polycarbonate"MTO Type 11A" - Catalog #SIGPSB04B435

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB03B310

Traffic Signal Head, Polycarbonate"MTO Type 2" - Catalog #SIGPSB03B310

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB03B301

Traffic Signal Head, Polycarbonate"MTO Type 3" - Catalog #SIGPSB03B301

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB04B421

Traffic Signal Head, Polycarbonate"MTO Type 4" - Catalog #SIGPSB04B421

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB04B401

Traffic Signal Head, Polycarbonate"MTO Type 5" - Catalog #SIGPSB04B401

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB04B432

Traffic Signal Head, Polycarbonate"MTO Type 6" - Catalog #SIGPSB04B432

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB05B512

Traffic Signal Head, Polycarbonate"MTO Type 7" - Catalog #SIGPSB05B512

Traffic SignalHead,Polycarbonate

Catalog #SIGCSB05B515

Traffic Signal Head, Polycarbonate"MTO Type 8" - Catalog #SIGCSB05B515

Peek Traffic Inc.

Ontario Source:Orange Traffic Inc. (OntarioDivision)1011 Upper Middle Rd E Suite 1217Oakville ON L6H 5Z9CanadaTel: 647-833-4638Fax: 450-477-0047Email:[email protected]: www.orangetraffic.com/en

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB05B502

Traffic Signal Head, Polycarbonate"MTO Type 8A" - Catalog #SIGPSB05B502

Traffic SignalHead,Polycarbonate

Catalog #SIGCSB04B437

Traffic Signal Head, Polycarbonate"MTO Type 9" - Catalog #SIGCSB04B437

Traffic SignalHead,Polycarbonate

Catalog #SIGPSB04B413

Traffic Signal Head, Polycarbonate"MTO Type 9A" - Catalog #SIGPSB04B413

Electrical List # 6.85.92Traffic Signal/Flasher Equipment Page 12 of 12Traffic Signal Head Date: 01-Jun-2017

SPECIFICATIONS: OPSS 620, OPSS 621* (Withdrawn* Nov 2007, Incl in OPSS 620), OPSS 2461DRAWINGS: OPSD 2500.0100, OPSD 2500.0200, OPSD

2501.0100, OPSD 2501.0200, OPSD 2508.0100, MTOD2540.0100 (Replaces* OPSD 2540.01 for MTO)

CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 291: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Catalogue No Notes / RemarksFortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

Snow Sentry SNW012, SNW412,SNW008, SNW408

The product is a snowshield for LED signalsthat is intended toreduce the potentialbuild-up of snow andice on the lens. OnlySNW408 andSNW412 includegaskets and LEDclips.

Electrical List # 6.85.94Traffic Signal/Flasher Equipment Page 1 of 1Traffic Signal Head, Snow Shields Date: 01-Jun-2011

SPECIFICATIONS: Contract DocumentsDRAWINGS:CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254 Bidders Tendering Queries call (905) 704-2203

Page 292: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 293: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product DescriptionAlpha Technologies Ltd.

Ontario Source:Tacel Ltd179 Bartley Dr., Unit BToronto ON M4A 1E6Tel: 416-750-4646Fax: 416-750-4649Toll Free: 877-750-4646Email: [email protected]: www.tacel.ca

Alpha Uninterruptible Power Supply Control Unit - FXM 1100 (P/N 017-230-34)

Alpha UPS Battery 195GXL - qty. 4 (P/N 181-230-10)

Alpha UPS S6 Enclosure - Pad mounted OR Pole mounted, including ATS/RPA, battery heater mats, batterycable kit, and rack mount brackets (P/N 026-053-48)

Alphaguard Battery Balancer - (P/N 012-306-21)

Distributor:Econolite Canada Inc.110 Travail Road,Markham ON L3S 3J1CanadaTel: 800-661-7226Fax: 905-294-2338Web: www.econolite.ca

UPS Control Unit DBL700MX

UPS Battery Pack - BPK#1/6x55AH

UPS Battery Enclosure - FreeStanding #C999G331-19

UPS - Base Extension for FreeStanding Cabinet - #C999P332-19

UPS Battery Enclosure - Backpack # C999G272-19

UPS - Base Extension (Pedestal) for Backpack - # C999P308-19

UPS Bypass Switch - EL/700/1000

Distributor:Fortran Traffic Systems Limited470 Midwest RoadToronto ON M1P 4Y5Tel: 416-288-1320Fax: 416-288-9914Toll Free: 1 800 387-4555Email: [email protected]: www.fortrantraffic.com

Dimensions Battery Back Up System from Sensata Technology Model #24M11-WBE

UPS - Cabinet

UPS-Battery

UPS-Bypass Switch

UPS-Inverter

Peek Traffic Inc.

Ontario Source:Orange Traffic Inc. (Ontario Division)1011 Upper Middle Rd E Suite 1217Oakville ON L6H 5Z9CanadaTel: 647-833-4638Fax: 450-477-0047Email:[email protected]: www.orangetraffic.com/en

UPS/Peek BBS, PB2000-ITS

UPS/Peek Control, Q-UPS

UPS/Peek Traffic Cabinet Enclosure (NEMA)

Electrical List # 6.85.95Traffic Signal/Flasher Equipment Page 1 of 2Uninterruptible Power Supplies (UPS) Date: 01-Jun-2017

SPECIFICATIONS: SP 622F01, SP 622F02DRAWINGS: MTOD 2528.0210CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 294: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product DescriptionZinc Five

Ontario Source:Innovative Traffic Solutions, Inc.#7-903 Barton StreetStoney Creek ON L8E 5P5Tel: 905-643-3994Fax: 905-643-6994Email: [email protected]: www.its-traffic.com

UPS/PSI, BBS, Ultrapower 1500

UPS/PSI, BBS, Ultrapower 1500N (NEMA)

UPS/PSI, BBS, UPStealth

Electrical List # 6.85.95Traffic Signal/Flasher Equipment Page 2 of 2Uninterruptible Power Supplies (UPS) Date: 01-Jun-2017

SPECIFICATIONS: SP 622F01, SP 622F02DRAWINGS: MTOD 2528.0210CUSTODIAL OFFICE : Electrical Engineering - (905) 704-2254

Page 295: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

No Records

Buildings List # 8.25.40Doors Page 1 of 1Overhead, Insulated Date: 01-Jun-2016

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Maintenance and Operations - (905) 704-2261

Page 296: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 297: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

No Records

Buildings List # 8.25.50Doors Page 1 of 1Overhead, Non-insulated Date: 01-Jun-2016

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Maintenance and Operations - (905) 704-2261

Page 298: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 299: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

No Records

Buildings List # 8.35.35Heating Systems Page 1 of 1Infa-red Single Tube System Date: 01-Jun-2016

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Maintenance and Operations - (905) 704-2261

Page 300: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 301: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

No Records

Buildings List # 8.35.40Heating Systems Page 1 of 1Infra-red Vacuum Tube Date: 01-Jun-2016

SPECIFICATIONS: Manufacturer's StandardsDRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Maintenance and Operations - (905) 704-2261

Page 302: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 303: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Elastomer Product IdentityD.S. Brown Co.

Ontario Source:Goodco Z-Tech1739 Drew RoadMississauga ON L5S 1J5Tel: 800-361-3510Fax: 450-786-1301Web: www.goodcoztech.ws

Neoprene Identification Letter (L)

Freudenberg-NOK Inc.

Ontario Source:Wercholoz Canada Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-5064Fax: 905-560-7070Email: [email protected]: www.wercholoz.com

Natural Rubber Identification Letter (D)

Neoprene Identification Letter (D)

Produits Hévéa inc.

Ontario Source:Watson Bowman Acme Inc10 Marthclare AveDon Mills ON M3A 1E2CanadaTel: 416-254-0048Fax: 416-386-0311Toll Free: 800-677-4922Email: [email protected]: www.wbacorp.com

Natural Rubber Identification Letter (P)

Produits Hévéa inc.

Ontario Source:Goodco Z-Tech1739 Drew RoadMississauga ON L5S 1J5Tel: 800-361-3510Fax: 450-786-1301Web: www.goodcoztech.ws

Natural Rubber Identification Letter (Q)

Produits Hévéa inc.

Ontario Source:Wercholoz Canada Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-5064Fax: 905-560-7070Email: [email protected]: www.wercholoz.com

Natural Rubber Identification Letter (M)

Structural List # 9.15.25Bearings, Bridge Page 1 of 1Elastomeric, Laminated Date: 01-Oct-2015

SPECIFICATIONS: OPSS 922, OPSS 1202 , SP 922F01DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 304: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 305: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product IdentityCPD Construction Products219 Connie Cres., Unit 13Concord ON L4K 1L4Tel: 905-669-5013Fax: 905-669-6455Email: [email protected]: www.cpd.ca

CPD Non-Shrink Grout

Hilti (Canada) Corp.2360 Meadowpine BoulevardMississauga ON L5N 6S2Tel: 1-800-363-4458Fax: 1-800-363-4459Toll Free: 1-800-363-4458Web: www.ca.hilti.com

Precision Grout

Mapei Inc.2900 Francis-Hughes AveLaval QC H7L 3J5Tel: 450-662-1212Fax: 450-662-9232Toll Free: 1-800-361-9309Web: www.mapei.com

Planigrout® 740

Sika Canada Inc601 Delmar AvenuePoint Claire QC H9R 4A9CanadaTel: 514-697-2610Fax: 514-694-2792Toll Free: 800-933-7452Web: www.sika.ca

Ontario Source:Sika Canada Inc.6915 Davand DriveMississauga ON L5T 1L5CanadaTel: 905-795-3177Fax: 905-795-3192Toll Free: 800-933-7452Email:[email protected]: www.sika.ca

Sika Grout 212 HP

Structural List # 9.15.35Bearings, Bridge Page 1 of 1Grout, Cement Based Non-Shrink Date: 03-Dec-2012

SPECIFICATIONS: OPSS.PROV 904, OPSS 922, SP 922S02 (Discontinued, included in OPSS 922, Nov 2003)DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705 Bidders Tendering Queries call (905) 704-2203

Page 306: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 307: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product Functionality Product NotesGoodco Z-Tech1739 Drew RoadMississauga ON L5S 1J5Tel: 800-361-3510Fax: 450-786-1301Web: www.goodcoztech.ws

Fabricator:Goodco Z-Tech807 Marshall Street, Suite 100,Laval QC H7S 1J9CanadaTel: 450-786-1300Fax: 450-786-1301Toll Free: 800-361-3510Web: www.goodcoztech.ws

BP1C (MTO Identification Letter) Uni-Directional (Center-Guided) Typical Dwg # P4A, Effective Date1991/07/11

BP1E (MTO Identification Letter) Uni-Directional (Edge-Guided) Typical Dwg # P3A, Effective Date1991/07/11

BP2 (MTO Identification Letter) Multi-Directional Typical Dwg # P2A, Effective Date1991/07/11

BP0 (MTO Identification Letter) Fixed Typical Dwg # P1A, Effective Date1991/07/11

Fabricator:Thorold Welding and FabricatingLtd.65 Ormond St. NorthThorold ON L2V 3Y9CanadaTel: 905-227-6763Fax: 905-227-6769Email: [email protected]

CP1C (MTO Identification Letter) Uni-Directional (Center-Guided) Typical Dwg # P-102-3, EffectiveDate 1992/06/02

CP2 (MTO Identification Letter) Multi-Directional Typical Dwg # P-101-3, EffectiveDate 1992/06/02

CP0 (MTO Identification Letter) Fixed Typical Dwg # P-100-3, EffectiveDate 1992/06/02

Wercholoz Canada Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-5064Fax: 905-560-7070Email: [email protected]: www.wercholoz.com

AP1 (MTO Identification Letter) Uni-Directional (Center-Guided) Typical Dwg # SK77A-85-1,Effective Date 1989/02/01

AP2 (MTO Identification Letter) Multi-Directional Typical Dwg # SK77B-85-1,Effective Date 1989/02/01

AP0 (MTO Identification Letter) Fixed Typical Dwg # SK77C-85-1,Effective Date 1989/02/01

Structural List # 9.15.71Bearings, Bridge Page 1 of 1Rotational, Pot, Class 1A Date: 04-Apr-2017

SPECIFICATIONS: OPSS 922, OPSS 1203DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 308: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 309: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product Functionality Product NotesR.J. Watson Inc.11035 Walden Ave.,Alden NY 14004USATel: 716-901-7020Fax: 716-901-7015Email: [email protected]: www.rjwatson.com

DD1E Uni-directional DisktronBearing

Uni-directional (Edge-guided) Typical Dwg# D1, Effective date2015/12/01

DD2 Multi-directional DisktronBearing

Multi-directional Typical Dwg# D2, Effective date2015/12/01

DD0 Fixed Disktron Bearing Fixed Typical Dwg# D0, Effective date2015/12/01

Watson Bowman Acme Inc10 Marthclare AveDon Mills ON M3A 1E2CanadaTel: 416-254-0048Fax: 416-386-0311Toll Free: 800-677-4922Email: [email protected]: www.wbacorp.com

CD1C (MTO Identification Letter) Uni-Directional (Center-Guided) Typical Dwg # R205-5, EffectiveDate 1990/10/01

CD1E (MTO Identification Letter) Uni-Directional (Edge-Guided) Typical Dwg # R201-3, EffectiveDate 1990/10/01

CD2 (MTO Identification Letter) Multi-Directional Typical Dwg # R204-5, EffectiveDate 1990/10/01

CD0 (MTO Identification Letter) Fixed Typical Dwg # R203-5, EffectiveDate 1990/10/01

Structural List # 9.15.75Bearings, Bridge Page 1 of 1Rotational, Disc, Class 2A Date: 01-Dec-2015

SPECIFICATIONS: OPSS 922, OPSS 1203DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 310: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 311: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

StructuralBearings, BridgeRotational, Spherical, Class 3A

DSM # 9.15.80Page 1

Date: 01-Oct-2000

SPECIFICATIONS: OPSS 1203, OPSS 922DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE: Bridge Office - (905) 704-2405 Bidders Tendering Queries call (905) 704-2203

Company Product Identity Product Functionality Product NotesAS1 (MTO Identification Letter) Uni-Directional (Edge-Guided) Typical Dwg # SK134-A-88, Effective Date

1991/03/05AS2 (MTO Identification Letter) Multi-Directional Typical Dwg # SK134-B-88, Effective Date

1991/03/05

Wercholoz Canada Inc95 Cascade St, Unit 2Hamilton ON L8E 3B7Tel: 905-560-5064Fax: 905-560-7070Email: [email protected]

AS0 (MTO Identification Letter) Fixed Typical Dwg # SK134-C-88, Effective Date1991/03/05

Page 312: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 313: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product IdentityCarboline (Division of StonCorGroup)95 Sunray StreetWhitby ON L1N 9C9Tel: 800-263-3112Fax: 800-786-6329Office: 905-430-3333Email: [email protected]: www.carboline.ca

Bitumastic 300M

PPG Canada Inc.8200 Keele StreetConcord ON L4K 2A5CanadaTel: 905-738-7310Fax: 905-669-3486Cellular: 416-347-9533Email: [email protected]: www.ppgpmc.com

Amercoat 78 HB

Sherwin-Williams Company418 North Service Rd. E, Suite 1AOakville ON L6H 5R2CanadaTel: 905-849-2921Fax: 905-849-2926Cellular: 416-676-2954Email: [email protected]: www.sherwin.com

C-200

HI-MIL Sher-Tar

Structural List # 9.20.10Coatings Page 1 of 1Coal Tar Epoxy for Structural Steel Piles Date: 01-Feb-2017

SPECIFICATIONS: Manufacturer's Standards, OPSS 903, OPSS.PROV 911, SP 911F10DRAWINGS:CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 314: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 315: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:Low VOC refers to any coating system containing less than 340 Grams per Litre of Volatile Organic Compounds (VOC).* DFT- Dry film thickness

Company Product System Coat # Coating Identity Coating Colour Thinner MinimumDFT*(µm)

Carboline (Division of StonCorGroup)95 Sunray StreetWhitby ON L1N 9C9Tel: 800-263-3112Fax: 800-786-6329Office: 905-430-3333Email: [email protected]: www.carboline.ca

Epoxy-Zinc/Acrylic/Acrylic (EZAA)

1st Carbozinc 858 Green 0300 Carboline 2 or 33 90

Epoxy-Zinc/Acrylic/Acrylic (EZAA)

2nd Carbocrylic 3358 Buff 0200 n/a 90

Epoxy-Zinc/Acrylic/Acrylic (EZAA)

3rd Carbocrylic 3359 Grey 4750 n/a 90

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

1st Carbozinc 858 Green 0300 Carboline 2 or 33 90

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

2nd Carboguard 893 Red 0500 Carboline 2 or 33 100

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

3rd Carbothane 134HG,Note: only materialproduced by therapid tint process isallowed.

Grey 4750, Brown7294

Carboline 25 50

InorganicZinc/Acrylic/Acrylic(IZAA)

1st Carbozinc 11HS Green 0300 Carboline 26 75

InorganicZinc/Acrylic/Acrylic(IZAA)

2nd Carbocrylic 3358 Buff 0200 n/a 90

InorganicZinc/Acrylic/Acrylic(IZAA)

3rd Carbocrylic 3359 Grey 4750 n/a 90

InorganicZinc/Epoxy/Polyurethane (IZEP)

1st Carbozinc 11HS Green 0300 Carboline 26 75

InorganicZinc/Epoxy/Polyurethane (IZEP)

2nd Carboguard 893 Red 0500 Carboline 2 or 33 100

InorganicZinc/Epoxy/Polyurethane (IZEP)

3rd Carbothane 134HG,Note: only materialproduced by therapid tint process isallowed.

Grey 4750, Brown7294

Carboline 25 50

Structural List # 9.20.39Coatings Page 1 of 2Low Voc Date: 01-Feb-2017

SPECIFICATIONS: OPSS.PROV 911, OPSS.PROV 1704, SP 911F10DRAWINGS:CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 316: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product System Coat # Coating Identity Coating Colour Thinner MinimumDFT*(µm)

International Paint (a division ofAkzo Nobel Coatings Ltd)463 Heddle CrescentNewmarket ON L3X 3J4CanadaTel: 416-525-6009Email: [email protected]: www.international-pc.com

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

1st Interzinc 315B Green InternationalGTA415

90

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

2nd Interguard 475HS Buff InternationalGTA007

100

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

3rd Interthane 870UHS US Fed Std 16307Grey, 10045 Brown

InternationalGTA056

75

PPG Canada Inc.8200 Keele StreetConcord ON L4K 2A5CanadaTel: 905-738-7310Fax: 905-669-3486Cellular: 416-347-9533Email: [email protected]: www.ppgpmc.com

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

1st Amercoat 68HS Grey, Reddish Amercoat 65 90

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

2nd Amercoat 385 White Amercoat 7, 65 or101

100

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

3rd Amercoat 450H US Fed. Std. 16307Grey, 10045 Brown

Amercoat 65 or 101 50

Sherwin-Williams Company418 North Service Rd. E, Suite 1AOakville ON L6H 5R2CanadaTel: 905-849-2921Fax: 905-849-2926Cellular: 416-676-2954Email: [email protected]: www.sherwin.com

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

1st Zinc Clad III HS Grey-Green R7K58 90

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

2nd Macropoxy 646 White R7K15 125

Epoxy-Zinc/Epoxy/Polyurethane(EZEP)

3rd Acrolon 218 HS US Fed Std 16307Grey, 10045 Brown

R7K15 75

Wasser Corporation520 boul. Curé BoivinBoisbriand QC J7G 2A7CanadaTel: 800-465-0905Fax: 450-430-7877Web: www.wassercoatings.com

MCU-Zinc/MC-Mio/MCU

1st MC-Zinc 100 Grey (W011.6) MC-100 90

MCU-Zinc/MC-Mio/MCU

2nd MC-Miomastic 100 Light Grey(W131.0347)

MC-100 100

MCU-Zinc/MC-Mio/MCU

3rd FerroxA 100 US Fed Std 16307Grey (W231.1091)10045 Brown(W231.7060)

MC-100 50

Structural List # 9.20.39Coatings Page 2 of 2Low Voc Date: 01-Feb-2017

SPECIFICATIONS: OPSS.PROV 911, OPSS.PROV 1704, SP 911F10DRAWINGS:CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 317: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductSystem

Coat # CoatingIdentity

CoatingColour

Thinner DFT Min (um)

Carboline (Division of StonCorGroup)95 Sunray StreetWhitby ON L1N 9C9Tel: 800-263-3112Fax: 800-786-6329Office: 905-430-3333Email: [email protected]: www.carboline.ca

ModifiedAluminum EpoxyMastic/AliphaticPolyurethane

1st Carbomastic15FC

Red M500 Carboline 2 125

ModifiedAluminum EpoxyMastic/AliphaticPolyurethane

2nd Carbothane 134HG, Note: onlymaterialproduced by therapid tintprocess isallowed.

Grey 4750 Carboline 25 50

PPG Canada Inc.8200 Keele StreetConcord ON L4K 2A5CanadaTel: 905-738-7310Fax: 905-669-3486Cellular: 416-347-9533Email: [email protected]: www.ppgpmc.com

High BuildEpoxy/AliphaticPolyurethane

1st Amercoat 385 White WH-01 Amercoat 7, 65or 101

100

High BuildEpoxy/AliphaticPolyurethane

2nd Amercoat 450H U.S. Fed. Std.16307 Grey

Amercoat 65 or101

75

Ontario Source:Sherwin-Williams Company418 North Service Rd. E, Suite 1AOakville ON L6H 5R2CanadaTel: 905-849-2921Fax: 905-849-2926Cellular: 416-676-2954Email: [email protected]: www.sherwin.com

High BuildEpoxy/AliphaticPolyurethane

1st Macropoxy 646FC

Mill White R7K15 orR7K111

125

High BuildEpoxy/AliphaticPolyurethane

2nd Acrolon 218 HS U.S. FederalStandard Colour# 16307

R7K15, R6K10or R7K111

75

Structural List # 9.20.60Coatings Page 1 of 1Paint Coating Systems for Galvanized Surfaces Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 911, OPSS.PROV 1704DRAWINGS:CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 318: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 319: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Coat # Coating Identity Coating Colour Thinner Minimum DFT*(micrometers)

PPG Canada Inc.8200 Keele StreetConcord ON L4K 2A5CanadaTel: 905-738-7310Fax: 905-669-3486Cellular: 416-347-9533Email: [email protected]: www.ppgpmc.com

single coatsystem

Amercoat PSX700FD

US Fed Std. 16307 Grey/10045 Brown

Amercoat 911 orAmercoat 101 orAmercoat 65

100

Wasser Corporation520 boul. Curé BoivinBoisbriand QC J7G 2A7CanadaTel: 800-465-0905Fax: 450-430-7877Web: www.wassercoatings.com

1st coat MC-Prepbond aluminum MC-100 25

2nd coat MC-Ferrox A US Fed Std. 16307 Grey(W231.1091)/ 10045Brown (W231.7060)

MC-100 75

Structural List # 9.20.65Coatings Page 1 of 1Seal Coatings for Metallized Surfaces Date: 01-Apr-2015

SPECIFICATIONS: OPSS.PROV 911*, OPSS.PROV 1704*DRAWINGS:CUSTODIAL OFFICE : Bridge Office - (905) 704-2351 Bidders Tendering Queries call (905) 704-2203

Page 320: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 321: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductSystem

Coat # Coating Identity Coating Colour Thinner DFT Min(um)

International Paint (a division ofAkzo Nobel Coatings Ltd)463 Heddle CrescentNewmarket ON L3X 3J4CanadaTel: 416-525-6009Email: [email protected]: www.international-pc.com

Epoxy-zinc/PolyasparticUrethane

1st Cathacoat 315 Green T-10 90

Epoxy-zinc/PolyasparticUrethane

2nd Devthane 349 QC U.S. Fed. Std.16307 Grey,10045 Brown

T-5 150

PPG Canada Inc.8200 Keele StreetConcord ON L4K 2A5CanadaTel: 905-738-7310Fax: 905-669-3486Cellular: 416-347-9533Email: [email protected]: www.ppgpmc.com

Epoxy-zinc/Polysiloxane

1st Amercoat 68HS Grey, Reddish Amercoat 65 90

Epoxy-zinc/Polysiloxane

2nd Amercoat PSX 700 U.S. Fed. Std.16307 Grey,10045 Brown

Amercoat 911 or 101 150

Sherwin-Williams Company418 North Service Rd. E, Suite 1AOakville ON L6H 5R2CanadaTel: 905-849-2921Fax: 905-849-2926Cellular: 416-676-2954Email: [email protected]: www.sherwin.com

Epoxy-zinc/PolyasparticUrethane

1st Zinc Clad III HS Grey-Green <27°C R6K10 or MEK;>27°C R7K104

90

Epoxy-zinc/PolyasparticUrethane

2nd Envirolastic 980 PA U.S. Fed. Std.16307 Grey,10045 Brown

<27°C R7K111 or MEK;>27°C R7K216

150

Structural List # 9.20.70Coatings Page 1 of 1Two (2)-Coat Zinc-Rich Rapid Deployment Coating Systems for StructuralSteel

Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 911, OPSS.PROV 1704DRAWINGS:CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 322: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 323: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Trade Identity Product IDBio-Protect (Belgium) SArue des Fagotis 3Novilles-les-Bois, ZI FernelmontB-5380BelgiumTel: +32 (0) 81 83 42 77Fax: +32 (0) 81 83 43 39Email: [email protected]: www.bioprotect.be

Distributor:Galvatech2000297 rue GendronSt Leon le Grand QC G0J 2W0CanadaTel: 514-519-1718Fax: 450-510-2014Email:[email protected]: www.galvatech2000.com

Rust Anode Primer 300015 (3.5 kg pack) or 300016 (12.5 kg pack)

Rust Anode 300023 (1.5 kg pack) or 300018B (12.0 kg pack)

Sherwin-Williams Company418 North Service Rd. E, Suite 1AOakville ON L6H 5R2CanadaTel: 905-849-2921Fax: 905-849-2926Cellular: 416-676-2954Email: [email protected]: www.sherwin.com

Zinc Clad 5 B69A45

ZRC Worldwide145 Enterprise Dr.Marshfield MA 02050-2132USATel: 781-319-0400Fax: 781-319-0404Toll free: 800-831-3275Email: [email protected]: www.zrcworldwide.com

Distributor:Kerry Industries Ltd.5250 Finch Ave. East, Units 8 & 9Scarborough ON M1S 5A4CanadaTel: 416-291-7106Fax: 416-291-0010Email: [email protected]: www.kerryindustries.com

ZRC Galvilite Series 20000

ZRC Cold Galvanizing Compound Series 10000

Structural List # 9.20.90Coatings Page 1 of 1Zinc-Rich Touch-up Date: 01-Feb-2017

SPECIFICATIONS: OPSS.PROV 911, CAN/CGSB-1.181-99 (Withdrawn*)DRAWINGS:CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 324: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 325: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:All of the products listed are in the form of a liquid. The air entraining admixtures listed must not be premixed with a chemical admixture solution. Whereboth a chemical admixture and an air entraining admixture are used in concrete, the two materials must be dispensed separately.

Company Product Identity Relative Density pHBASF1800 Clark BlvdBrampton ON L6T 4M7Tel: 905-792-2012Fax: 905-792-0651Toll free: 800-387-5862Web: www.basf-admixtures.com

MasterAir VR 10 1.037 12.7

MasterAir AE 210 1.020 11.3

MasterAir AE 90 1.017 10.8

MasterAir AE 200 1.013 11.5

MasterAir AE 400 1.010 10.0

Canadian Source:Chemsonite Global Inc.

Chemsonite Airex 1.005 8.0

Euclid Admixture Canada Inc.(Quebec)2835 Grande-AlleSaint-Hubert QC J4T 2R4CanadaTel: 450-465-2233Fax: 450-465-2140Web: www.euclidchemical.com

Ontario Source:Euclid Admixture Canada Inc.595 Canarctic DriveNorth York ON M3J 2P9CanadaTel: 416-747-7107Fax: 416-747-9970

Airex L 1.007 11.0

Airextra 1.009 10.0

Euco Air 1.009 8.0

Eucon Air Mac 12 1.011 10.3

Eucon Air Mac 6 1.006 11.0

GCP Applied Technologies Inc.294 Clements Rd WAjax ON L1S 3C6CanadaTel: 905-683-8561Fax: 905-683-5947Toll free: 800-263-7500Web: www.graceconstruction.com

Darex AEA 1.014 8.0

Darex II AEA 1.020 11.3

Daravair 1400 1.010 11.0

Darex AEA EH 1.018 10.3

Darex AEA ED 1.008 11.0

Premiere Concrete Admixtures, LLC508 Cedar Street PO Box 277Pioneer OH 43554United StatesTel: 800-503-3418Fax: 419-737-9400Email:[email protected]: premiereconcretesolutions.com

ConAir 1.025 12.0

ConAir 260 1.003 9.7

Structural List # 9.25.05Concrete Page 1 of 2Admixtures, Air Entraining Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 326: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Relative Density pHSika Canada Inc.6915 Davand DriveMississauga ON L5T 1L5CanadaTel: 905-795-3177Fax: 905-795-3192Toll Free: 800-933-7452Email:[email protected]: www.sika.ca

Sika AIR 1.050 12.5

Sika AEA - 14 1.008 11.0

Sika Multi Air 25 1.010 10.0

Sika Air 260 1.008 12.3

Sika Air 360 1.008 7.5

Sika Air 60 1.010 8.0

Structural List # 9.25.05Concrete Page 2 of 2Admixtures, Air Entraining Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 327: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:Chemical and superplasticizing admixtures may be used with air entraining admixtures listed herein or alternatively, with other air entraining admixtureslisted in DSM 9.25.05. The air void system in the hardened concrete shall meet the contract requirements for spacing factor and total air content.DOSAGE:Minimum dose per 100 kg of cement (in ml). When a water reducing admixture and a set retarding admixture are both used in a concrete mix, theminimum dose requirement shall only apply to one of the two products.ABBREVIATIONS:A- water reducing, B - set retarding, C - accelerating, D-water reducing and retarding, E - water reducing and accelerating, F- superplasticizing, G -superplasticizing and retarding, S - other as defined by OPSS 1303

Company ProductIdentity

Form Min.Dose

Type Non-Chloride

Required AirEntraining Admixture

RelativeDensityat 25Deg C

Non-VolatileContent at105 Deg C(%)

BASF1800 Clark BlvdBrampton ON L6T 4M7Tel: 905-792-2012Fax: 905-792-0651Toll free: 800-387-5862Web: www.basf-admixtures.com

MasterSetDelvo

Liquid 715 ml B and D (RX) yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.070 13.5

MasterSetR 100

Liquid 150 ml B and D (SR,RX)

yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.220 47.0

MasterGlenium3030

Liquid 150 ml A (WN) yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.047 20.25

MasterPozzolith210

Liquid 195 ml A (WN) yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.139 33.0

MasterGlenium3030

Liquid n/a F (super-plasticizer)

yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.047 20.3

MasterRheobuild1000

Liquid n/a F (super-plasticizer)

yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.205 40.0

MasterGlenium3400

Liquid n/a F (super-plasticizer)

yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.107 44.6

Structural List # 9.25.10Concrete Page 1 of 9Admixtures, Chemical and Superplasticizing Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 328: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Form Min.Dose

Type Non-Chloride

Required AirEntraining Admixture

RelativeDensityat 25Deg C

Non-VolatileContent at105 Deg C(%)

BASF1800 Clark BlvdBrampton ON L6T 4M7Tel: 905-792-2012Fax: 905-792-0651Toll free: 800-387-5862Web: www.basf-admixtures.com

PS-1466 Liquid n/a F (super-plasticizer)

yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.109 43.9

MasterGlenium7700

liquid n/a F (super-plasticizer)

yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.069 33.0

MasterCast700

Liquid 150 ml Type S.Admixture fordry castmanufacturedconcreteproducts

yes When required, MasterAirVR 10 or MasterAir AE210 or MasterAir AE 90 orMasterAir 200 orMasterAir 400

1.027 9.9

MasterGlenium7102

Liquid n/a F (super-plasticizer)

yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.048 25.35

MasterGlenium7500

Liquid n/a F (super-plasticizer)

yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.051 26.25

MasterSureZ 60

Liquid n/a S yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.043 19.90

MasterSetFP 20

Liquid n/a C (Acceler-ating)

yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.350 48.35

BASF1800 Clark BlvdBrampton ON L6T 4M7Tel: 905-792-2012Fax: 905-792-0651Toll free: 800-387-5862Web: www.basf-admixtures.com

MasterGlenium7925

Liquid 165 ml A (WN) yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.070 31.5

MasterGlenium7925

Liquid n/a F (super-plasticizing)

yes MasterAir VR 10 orMasterAir AE 210 orMasterAir AE 90 orMasterAir 200 orMasterAir 400

1.070 31.5

Structural List # 9.25.10Concrete Page 2 of 9Admixtures, Chemical and Superplasticizing Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 329: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Form Min.Dose

Type Non-Chloride

Required AirEntraining Admixture

RelativeDensityat 25Deg C

Non-VolatileContent at105 Deg C(%)

Canadian Source:Chemsonite Global Inc.

ChemsoniteSP- 450

Liquid n/a F (super-plasticizer)

yes Chemsonite Airex 1.230 40.9

ChemsoniteRP350

Liquid 250 B and D yes Chemsonite Airex 1.170 30.0

ChemsoniteWaterReducer

Liquid 200 A yes Chemsonite Airex 1.190 35.0

Euclid Admixture Canada Inc.(Quebec)2835 Grande-AlleSaint-Hubert QC J4T 2R4CanadaTel: 450-465-2233Fax: 450-465-2140Web: www.euclidchemical.com

Ontario Source:Euclid Admixture Canada Inc.595 Canarctic DriveNorth York ON M3J 2P9CanadaTel: 416-747-7107Fax: 416-747-9970

Eucon WR Liquid 250 ml A (WN) yes Airex L, or Airextra, EucoAir, AirMac 6 or AirMac 12

1.213 40.2

EuconWR-75

Liquid 250 ml A (WN) yes Airex L, or Airextra, EucoAir, AirMac 6 or AirMac 12

1.195 40.2

EUCON727

Liquid 185 ml B and D (R,RX)

yes Airex L, or Airextra, EucoAir, or AirMac 6 AirMac 12

1.160 31.0

Plastol 341 Liquid 163 ml A (WN) yes Airex L, or Airextra, EucoAir, AirMac 6 or AirMac 12

1.046 20.5

Plastol 341 Liquid n/a F (super-plasticizer)

yes Airex L, or Airextra, EucoAir, AirMac 6 or AirMac 12

1.046 20.5

Eucon 37 Liquid n/a F (super-plasticizer)

yes Airextra, AirMac 6 orAirMac 12

1.210 40.5

Eucon 537 Liquid n/a G (super-plasticizer)

yes Airextra, AirMac 6 orAirMac 12

1.210 41.0

Euclid Admixture Canada Inc.(Quebec)2835 Grande-AlleSaint-Hubert QC J4T 2R4CanadaTel: 450-465-2233Fax: 450-465-2140Web: www.euclidchemical.com

Ontario Source:Euclid Admixture Canada Inc.595 Canarctic DriveNorth York ON M3J 2P9CanadaTel: 416-747-7107Fax: 416-747-9970

Plastol5000

Liquid n/a F (super-plasticizer)

yes Airex L, or Airextra, EucoAir, AirMac 6 or AirMac 12

1.070 31.0

Plastol6200 EXT

Liquid n/a F (super-plasticizer)

yes Airex L, or Airextra, EucoAir, AirMac 6 or AirMac 12

1.082 40.0

Plastol6400

Liquid n/a F (super-plasticizer)

yes Airex L, or Airextra, EucoAir, AirMac 6 or AirMac 12

1.090 38.0

PlastolAMP-X2

Liquid 270 mL A yes Airex L, or Airextra, EucoAir, AirMac 6 or AirMac 12

1.044 20.0

Eucon CIA Liquid n/a C (Acceler-ating)

yes Airex L, or Airextra, EucoAir, AirMac 6 or AirMac 12

1.300 35.0

Accelguard90

Liquid n/a C (Acceler-ating)

yes Airex L, or Airextra, EucoAir, AirMac 6 or AirMac 12

1.380 52.7

Structural List # 9.25.10Concrete Page 3 of 9Admixtures, Chemical and Superplasticizing Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 330: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Form Min.Dose

Type Non-Chloride

Required AirEntraining Admixture

RelativeDensityat 25Deg C

Non-VolatileContent at105 Deg C(%)

GCP Applied Technologies Inc.294 Clements Rd WAjax ON L1S 3C6CanadaTel: 905-683-8561Fax: 905-683-5947Toll free: 800-263-7500Web: www.graceconstruction.com

DaratardHC

Liquid 190 ml B and D (R,RX)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.1725 31.0

Daratard 17 Liquid 190 ml B and D (R,RX)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.2450 47.3

WRDA 20 Liquid 220 ml A (WN, SN) yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.185 47.0

WRDA 82 Liquid 190 ml A (WN, SN) yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.216 45.2

Daracem 19 Liquid n/a F (super-plasticizer)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.220 42.0

DaracemML 330

Liquid n/a F (super-plasticizer)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.190 32.0

ADVA 100 Liquid n/a F (super-plasticizer)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.070 31.0

Structural List # 9.25.10Concrete Page 4 of 9Admixtures, Chemical and Superplasticizing Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 331: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Form Min.Dose

Type Non-Chloride

Required AirEntraining Admixture

RelativeDensityat 25Deg C

Non-VolatileContent at105 Deg C(%)

GCP Applied Technologies Inc.294 Clements Rd WAjax ON L1S 3C6CanadaTel: 905-683-8561Fax: 905-683-5947Toll free: 800-263-7500Web: www.graceconstruction.com

ADVA 140 Liquid n/a F (super-plasticizer)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.040 16.0

ADVA 408 Liquid n/a F (super-plasticizer)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.040 19.5

ADVACAST 575

Liquid n/a F (super-plasticizer)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA. 1

1.075 38.5

ADVA Cast535

Liquid n/a F (super-plasticizer)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA. 1

1.02 10.3

ADVACAST 585

Liquid n/a F (super-plasticizer)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA. 1

1.080 38.0

ZYLA 630 Liquid 360 ml A (WN) yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.095 22.5

MIRA 95 Liquid n/a F (super-plasticizing)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA. 1

1.035 10.0

GCP Applied Technologies Inc.294 Clements Rd WAjax ON L1S 3C6CanadaTel: 905-683-8561Fax: 905-683-5947Toll free: 800-263-7500Web: www.graceconstruction.com

ADVA 198 Liquid n/a F (super-plasticizing)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA. 1

1.070 27.5

ADVA150M

Liquid N/A A and F(SPN)

yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA

1.033 12.42

RECOVER Liquid 180 ml B (R) yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA

1.117 22.19

Daraset 400 Liquid N/A AC (ASTMType C)

Yes Darex AEA, Darex AEAED, Daravair, Daravair R,Darex II AEA, Daravair1400 or Darex EH AEA.

1.436 54

Structural List # 9.25.10Concrete Page 5 of 9Admixtures, Chemical and Superplasticizing Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 332: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Form Min.Dose

Type Non-Chloride

Required AirEntraining Admixture

RelativeDensityat 25Deg C

Non-VolatileContent at105 Deg C(%)

Premiere Concrete Admixtures, LLC508 Cedar Street PO Box 277Pioneer OH 43554United StatesTel: 800-503-3418Fax: 419-737-9400Email:[email protected]: premiereconcretesolutions.com

Nitrocast K Liquid 1250 ml C yes ConAir, ConAir 260 1.375 48.68

OptiFlo100R Liquid 110 ml B and D (WRand R)

yes ConAir, ConAir 260 1.187 33.82

OptiFlo 50 Liquid 310 ml A (WN) yes ConAir, ConAir 260 1.206 39.13

OptiFlo 50 Liquid 390 ml D (WR) yes ConAir, ConAir 260 1.206 39.13

OptiFlo 500 Liquid 130 ml A (WN) yes ConAir, ConAir 260 1.234 43.38

OptiFlo 500 Liquid 325 ml D (WR) yes ConAir, ConAir 260 1.234 43.38

OptiFlo MR Liquid 270 ml A (WN) yes ConAir, ConAir 260 1.270 44.20

Premiere Concrete Admixtures, LLC508 Cedar Street PO Box 277Pioneer OH 43554United StatesTel: 800-503-3418Fax: 419-737-9400Email:[email protected]: premiereconcretesolutions.com

UltraFlo2000

Liquid 200 ml A (WN) yes ConAir, ConAir 260 1.055 19.0

UltraFlo2000

Liquid n/a F (super-plasticizer)

yes ConAir, ConAir 260 1.055 19.0

UltraFlo DP Liquid n/a F (super-plasticizer)

yes ConAir, ConAir 260 1.090 35.0

Structural List # 9.25.10Concrete Page 6 of 9Admixtures, Chemical and Superplasticizing Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 333: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Form Min.Dose

Type Non-Chloride

Required AirEntraining Admixture

RelativeDensityat 25Deg C

Non-VolatileContent at105 Deg C(%)

Sika Canada Inc.6915 Davand DriveMississauga ON L5T 1L5CanadaTel: 905-795-3177Fax: 905-795-3192Toll Free: 800-933-7452Email:[email protected]: www.sika.ca

Plastiment Liquid 273 ml B and D(WR, SR, R)

yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.185 32.5

SikaViscoCrete6100

Liquid 160 ml A (WN) yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.085 34.50

SikamentAFM

Liquid 335 ml A (WN) yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.029 11.0

Sikament686

Liquid 235 ml A (WN) yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.050 22.0

SikaViscoCrete2100

Liquid n/a F (super-plasticizer)

yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.080 36.0

Plastocrete161

Liquid 234 ml Type A (WN) yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.225 35.0

Sikaplast500

Liquid 234 ml A (WN) yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.155 33.0

Structural List # 9.25.10Concrete Page 7 of 9Admixtures, Chemical and Superplasticizing Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 334: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Form Min.Dose

Type Non-Chloride

Required AirEntraining Admixture

RelativeDensityat 25Deg C

Non-VolatileContent at105 Deg C(%)

Sika Canada Inc.6915 Davand DriveMississauga ON L5T 1L5CanadaTel: 905-795-3177Fax: 905-795-3192Toll Free: 800-933-7452Email:[email protected]: www.sika.ca

SikaViscoCrete2110

Liquid n/a F (super-plasticizer)

yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.094 41.0

SikaPlastocrete161 N

Liquid 250ml A (SN) yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.203 45.0

SikaPlastimentRX

Liquid 235 ml B and D (RX) yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.228 42.6

SikaPlastocrete10 N

Liquid 165 ml A (WN, SN) yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.205 44.7

SikaPlast200

Liquid 394 ml A (WN) yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.295 44.0

SikamentSP-MN

Liquid n/a F (super-plasticizer)

yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.190 40.0

SikaViscoCrete6100

Liquid n/a F (super-plasticizer)

yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.085 34.5

Structural List # 9.25.10Concrete Page 8 of 9Admixtures, Chemical and Superplasticizing Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 335: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Form Min.Dose

Type Non-Chloride

Required AirEntraining Admixture

RelativeDensityat 25Deg C

Non-VolatileContent at105 Deg C(%)

Sika Canada Inc.6915 Davand DriveMississauga ON L5T 1L5CanadaTel: 905-795-3177Fax: 905-795-3192Toll Free: 800-933-7452Email:[email protected]: www.sika.ca

Sikament686

Liquid n/a F (super-plasticizer)

yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.050 22.0

SikaSetRHE

Liquid 660 ml C yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.400 55.5

Sika Tard440

Liquid 250 B and D yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.140 21.0

Sikament300N

Liquid n/a F (super-plasticizer)

yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.200 40.0

SikaViscoCrete1000

Liquid n/a F (super-plasticizer)

yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.062 25.6

SikaViscoCrete1000

Liquid 133 A (WN) yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.062 25.6

SikaViscoFlow2020

Liquid 130 ml S Yes Sika Air or Sika Air 60 orSika Air 260 or Sika Air360 or Sika Multi-Air 25 orSika AEA-14

1.055 20.5

Structural List # 9.25.10Concrete Page 9 of 9Admixtures, Chemical and Superplasticizing Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS.PROV 1303, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 336: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 337: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Non-Volatile Content - % Relative DensityAmerican Highway Technology byDayton Superior Corp2150 B South Route 45-52Kankakee IL 60901USATel: 815-936-3300Fax: 815-936-3306Toll Free: 1-800-571-8796Email: [email protected]:www.americanhighwaytechnology.com

Distributor:Danruss Contracting Inc.

AHT Type II, Class B Cure 23.0 1.020

Chemmasters Inc300 Edwards St.Madison OH 44057USATel: 440-428-2105Fax: 440-428-7091Toll Free: 800-486-7866Web: www.chemmasters.net

Distributor:Vieira Concrete Supplies357 Gage Ave. N.Hamilton ON L8L 7A8CanadaTel: 905-544-7088Fax: 905-544-7089

Safe-Cure 3000 35.5 1.010

Safe-Cure 3500 23.0 1.010

Vexcon Chemicals Inc.7240 State RoadPhiladelphia PA 19135USATel: 215-332-7709Fax: 215-332-9997Toll Free: 888-vexcon1Email: [email protected]: www.vexcon.com

Ontario Source:National Concrete Accessories172 Bethridge RoadToronto ON M9W 1N3CanadaTel: 416-245-4720Fax: 416-242-2727Web:www.nca.ca/nca/products/default.asp

Enviocure White 500 25.0 1.100

Structural List # 9.25.25Concrete Page 1 of 2Curing Membrane Compounds, Type 2, White Pigmented Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS 1315*DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 338: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Non-Volatile Content - % Relative DensityW. R. Meadows of Canada70 Hannant CourtMilton ON L9T 5C1CanadaTel: 905-878-4122Fax: 905-878-4125Toll Free: 800-563-3618Email: [email protected]: www.wrmeadows.com

Sealtight 1220 17.0 1.02

Watson Acme Bowman Inc95 Pineview DriveAmherst NY 14228United StatesTel: 716-691-7566Fax: 716-691-9239Email: [email protected]: www.wbacorp.com

Horsey Set WDE 38.7 1.214

Structural List # 9.25.25Concrete Page 2 of 2Curing Membrane Compounds, Type 2, White Pigmented Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS 1315*DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 339: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Type Plants SourceBecancour Silicon Inc. Silica Fume SF St Laurent QC

Ciment Québec inc.145 Boul. du CentenaireSt-Basile QC G0A 3G0CanadaTel: 418-329-2100Fax: 418-329-2208Web: www.cimentquebec.com

Distributor:Ciment Québec inc.125 Rue SaulnierLaval QC H7M 1S9CanadaTel: 800-361-3960Fax: 450-975-9906Web: www.cimentquebec.com

Portland Cement Type GU St Basile QC (Plant) and LavalQC (Distribution Centre)

Blended HydraulicCement

Type GUb-8SF St. Basile QC Silica fume source, BecancourSilicon Inc.

Colacem Canada Inc1235 Chemin KilmarGrenville-sur-la Rouge QC J0V 1B0CanadaTel: 819-242-4312Fax: 819-242-4313Email: [email protected]: www.colacem.com

Portland Cement Type GU Grenville-sur-la-Rouge, QC

Portland Cement Type HE Grenville-sur-la-Rouge, QC

Blended HydraulicCement

Type GUb-8SF Grenville-sur-la-Rouge, QC Silica fume source, QuebecSilicon LP, Becancour

CRH Canada Group Inc.2300 Steeles Avenue West, 4th floorConcord ON L4K 5X6Tel: 905-532-3000Fax: 905-761-7200Web: www.crhcanada.com

Blended Cement Type GUb - 8 SF(HSF)

Jolliette, QC, Clarkson,Mississauga ON

Ground GranulatedBlast-Furnace Slag

Type S Clarkson, Mississauga ON Algoma

Portland Cement Type GU Clarkson, Mississauga ON,Joliette QC

Portland Cement Type HE Clarkson, Mississauga, ON

Ground GranulatedBlast-Furnace Slag

Type S Clarkson, Mississauga, ON Lake Erie Steel, Nanticoke

Ground granulatedblast furnace slag

Type S Clarkson, Mississauga, ON Dofasco, Stelco, Hamilton, ON

Ground GranulatedBlast Furnace Slag

Type S Clarkson, Mississauga ON Gary, Indiana

Portland LimestoneCement

Type GUL Clarkson, Mississauga, ON

Headwaters Resources East Area Fly Ash Type C Bayshore Station, Ohio FirstEnergy Corp.

Structural List # 9.25.40Concrete Page 1 of 5Hydraulic Cements and Supplementary Cementing Materials Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS 1301*, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 340: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Type Plants SourceHolnam Inc - Plant

Distributor:CRH Canada Group Inc.2300 Steeles Avenue West, 4th floorConcord ON L4K 5X6Tel: 905-532-3000Fax: 905-761-7200Web: www.crhcanada.com

Portland Cement Type GU Dundee MI

Keystone Cement Company Portland Cement Type GU Bath, PA

Portland Cement Type HE Bath, PA

Structural List # 9.25.40Concrete Page 2 of 5Hydraulic Cements and Supplementary Cementing Materials Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS 1301*, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 341: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Type Plants SourceLafarge Canada Inc. - (EasternCanada)6509 Airport RoadMississauga ON L4V 1S7CanadaTel: 905-738-7070Fax: 905-764-6188Toll Free: 800-668-1825Web: www.lafargenorthamerica.com

Portland Cement Type GU Bath ON, Alpena MI, StConstant QC, Exshaw AB andBrookfield, Nova Scotia

Portland Cement Type HE Bath ON, Alpena MI,St.Constant QC, Brookfield,Nova Scotia

Blended Cement Type GUb- 8SF St Constant QC

Blended cement,Lafarge SF cement

Type GUb-8SF Detroit, MI Blend of Alpena GU cement(MI) and Suttles Alloy SF (WV)

Ternary BlendedCement

Type GUb -22S/5SF (Tercem)

St. Constant, QC

Ternary BlendedCement, TerCem3000

Type GUb-22S/5SF(TerCem 3000)

Detroit, MI Blend of Alpena GU cement(MI), South Chicago slag (IL)and Suttles Alloy SF (WV)

Ground GranulatedBlast Furnace Slag

Type S (NewCem) Stoney Creek, ON, Spragge,ON, Montreal, QC, SouthChicago Plant, IL

BlendedSupplementaryCementing Material

BMb - 70S/30C(NewCem Plus)

Stoney Creek, ON Stoney Creek GroundGranulated Blast Furnace Slagand Belle River Fly Ash

Fly Ash Type C St. Clair and Belle River,Michigan, Pleasant Prairie,Wisconsin

Detroit Edison

Fly Ash Type C Columbia Units 1 and 2,Wisconsin

Wisconsin Public ServiceCorporation

Fly Ash Type CH Edgewater Station, Unit 5 Alliant Power, Sheboygan WI

Fly Ash Type CH Weston Station Wisconsin Public Service Corp.Rothschild, WI

Fly Ash Type F W.H. Sammis Power Plant,Stratton, Ohio

FirstEnergy Group

Fly Ash Type CH J.H. Campbell GeneratingComplex, West Olive, Michigan

Consumers Energy

Fly Ash CH Baldwin Plant, Unit 3, MI FirstEnergy Corp.

Fly Ash CI Marquette, Presque Isle PowerPlant, MI

We Energies, MI

Fly Ash CI Monroe Plant, MI DTE Energy

Structural List # 9.25.40Concrete Page 3 of 5Hydraulic Cements and Supplementary Cementing Materials Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS 1301*, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 342: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Type Plants SourceLafarge Canada Inc. - (EasternCanada)6509 Airport RoadMississauga ON L4V 1S7CanadaTel: 905-738-7070Fax: 905-764-6188Toll Free: 800-668-1825Web: www.lafargenorthamerica.com

Fly Ash Type CI- blended flyash

Blending at Mitchell ParkTerminal. Belle River, MI andW.H. Sammis, Ohio

Detroit Edison and FirstEnergyCorp.

Fly Ash Type C Erickson and Eckert Plants, MI Lansing Board of Water andLight, MI

Fly Ash Type CI Coal Creek Station, ND Great River Energy,Underwood, North Dakota

Fly Ash Type F Sundance Power Plant,Wabamun, AB

TransAlta Corporation

Portland LimestoneCement

Type GUL Bath, ON

Lehigh CementBox 4080, RPO Redwood Centre, 2494Ferrier St.Winnipeg MB R2W 5K8Tel: 204-334-4300Fax: 204-334-5900Toll Free: 800-661-7447Web: www.lehighhansoncanada.com

Portland Cement Type GU Edmonton AB

Lehigh Cement Company (formerlyEssroc Italcementi Group)PO Box 80 1505 Main StEssexville MI 48732USATel: 517-894-4581Fax: 517-894-0520Toll Free: 800-386-2111Web: www.essroc.com

Lehigh Cement Company (formerlyEssroc Italcementi Group)1370 HWY 49 South, P.O. Box 620Picton ON K0K 2T0caTel: 226-868-4422Toll Free: 800-386-2111Web: http://www.lehighhanson.com

Portland Cement Type HE Picton ON

Portland Cement Type GU Picton ON

Ground GranulatedBlast-Furnace Slag

Type S Picton, ON Arcelormittal Dofasco, Hamilton

Portland LimestoneCement - Type GUL

Type GUL Picton, ON

Ontario Source:Miller Precast Ltd.58 Cooper RdRosslyn ON P7K 0E3Tel: 807-939-2655Fax: 807-939-1788Email: [email protected]: www.millerprecast.ca

Fly Ash Type CH North Shore Mining, Silver Bay,MN

Silver Bay Power Company

Norchem Concrete Products Inc. Silica Fume SF Niagara Falls, Furnace #9

Structural List # 9.25.40Concrete Page 4 of 5Hydraulic Cements and Supplementary Cementing Materials Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS 1301*, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 343: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Type Plants SourceDistributor:SaskPowerPower Production,FlyAsh Sales2025 Victoria Ave.Regina SK S4P 0S1CanadaTel: 800-667-8022Fax: 306-566-3034Email: [email protected]: www.saskpower.com

Fly Ash Type CI Boundary Dam Power Station,Estevan, Saskatchewan

SaskPower

St. Marys Cement Inc.55 Industrial St, 4th FlrToronto ON M4G 3W9CanadaTel: 416-696-4411Fax: 416-696-4435Toll Free: 800-268-6148Web: www.stmaryscement.com

Portland Cement Type GU St Marys ON, and BowmanvilleON

Blended Cement Type GUb - 8SF St Marys ON

Ground GranulatedBlast-Furnace Slag

Type S (CemPlus) Bowmanville, ON

Ground GranulatedBlast-Furnace Slag

Type S (CemPlus) St. Marys, ON Algoma

Ground GranulatedBlast-Furnace Slag

Type S (CemPlus) St. Marys, ON Stelco Lake Erie, Nanticoke

Ground GranulatedBlast-Furnace Slag

Type S (CemPlus) Detroit, Michigan Algoma

Ground GranulatedBlast-Furnace Slag

Type S (CemPlus) Detroit, Michigan Stelco Lake Erie, Nanticoke

Portland Cement Type HE St. Marys, ON andBowmanville, ON

Portland Cement Type GU Detroit, Michigan

Ground GranulatedBlast Furnace Slag

Type S (CemPlus) Clarkson, Mississauga, ON Stelco Lake Erie, Nanticoke

Portland Cement Type GU Charlevoix, MI

Portland Cement Type HE Detroit, MI

Portland LimestoneCement

Type GUL St. Marys, ON andBowmanville, ON

Structural List # 9.25.40Concrete Page 5 of 5Hydraulic Cements and Supplementary Cementing Materials Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 904, OPSS 1301*, OPSS.PROV 1350DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 344: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 345: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Note #1: For vertical and horizontal applications only; not for overhead use except as specified in MTO D2104.01

Company Product Name Product Model Use Description Product Attribute NotesDayton Superior Canada Ltd.6650 Pacific CircleMississauga ON L5T 1V6Tel: 416-798-2000Fax: 416-798-1103Web: www.daytonsuperior.com

Sure-Anchor Fast Set J-51-AW NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

DEWALT/Powers Inc.2 Powers LaneBrewster NY 10509USATel: 914-235-6300Fax: 914-576-6483Email: [email protected]: www.powers.com

DEWALT AC 100+Gold

DEWALT AC 100+Gold

NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

DEWALT Pure 110+ DEWALT Pure 110+ NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

DEWALT AC 200+ DEWALT AC 200+ NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

Hilti (Canada) Corp.2360 Meadowpine BoulevardMississauga ON L5N 6S2Tel: 1-800-363-4458Fax: 1-800-363-4459Toll Free: 1-800-363-4458Web: www.hilti.ca

HIT HY 200 HY 200 (A or R) NOT for overhead use see note # 1Verticial and horizontal ONLY

Cartridge (mix in nozzle)

HIT HY 200 SAFESET

HY 200 (A or R) NOT for overhead use see note # 1Verticial and horizontal ONLY

Cartridge (mix in nozzle)

HIT HY 100 HY 100 NOT for overhead use see note # 1Verticial and horizontal ONLY

Cartridge (mix in nozzle)

HIT RE 500-SD HIT RE 500-SD NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

HIT-RE 100 HIT-RE 100 NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

HIT-RE 500 V3 HIT-RE 500 V3 NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

HIT-RE 500 V3SAFE SET

HIT-RE 500 V3SAFE SET

NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

HIT-ICE HIT-ICE NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

ITW Construction Products120 Travail Rd.,Markham ON L3S 3J1Tel: 905-471-7403Fax: 905-471-7208Email: [email protected]: www.itwconstruction.ca

EPCON A7+Adhesive Anchor

A7+ NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

Epcon S7 AdhesiveAnchor System

S7 NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

Structural List # 9.30.25Dowel Adhesives Page 1 of 2Acrylic and Epoxy Resins Date: 01-Feb-2018

SPECIFICATIONS: OPSS.PROV 904DRAWINGS: OPSD 0509.0100CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 346: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Model Use Description Product Attribute NotesSika Canada Inc.6915 Davand DriveMississauga ON L5T 1L5CanadaTel: 905-795-3177Fax: 905-795-3192Toll Free: 800-933-7452Email:[email protected]: www.sika.ca

SikaAnchorFix-2Arctic

NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

SikaAnchorFix-2001

NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

SikaAnchorFix-3001

NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

Simpson Strong-Tie Canada, Ltd.5 Kenview Blvd.Brampton ON L6T 5G5CanadaTel: 905-458-5538Fax: 905-458-7274Web: www.simpsonanchors.com

Simpson Strong -TieAT-XP

AT-XP NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

Ucan Fastening Products155 Champagne Dr Unit 10North York ON M3J 2C6CanadaTel: 416-631-9400Fax: 416-631-9426Toll Free: 800-268-1248Email: [email protected]: www.ucanfast.com

FLO-ROK FR5 MAX FR5-28 Max NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

FLO-ROK FR6-SD FR6-20SD NOT for Overhead use see note#1, Vertical and Horizontal ONLY

Cartridge (mix in nozzle)

Structural List # 9.30.25Dowel Adhesives Page 2 of 2Acrylic and Epoxy Resins Date: 01-Feb-2018

SPECIFICATIONS: OPSS.PROV 904DRAWINGS: OPSD 0509.0100CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 347: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Identity Product Model Effective DateCPD Construction Products219 Connie Cres., Unit 13Concord ON L4K 1L4Tel: 905-669-5013Fax: 905-669-6455Email: [email protected]: www.cpd.ca

Chemject System Sure-Seal Injection Hose and 907 Epoxy 1995/07/17

Fuhrscher Installations Inc.33 Howard PlaceKitchener ON N2K 2Z4CanadaTel: 519-747-3993Fax: 519-747-5759Email: [email protected]

Sure-Seal Injection System Sure-Seal Injection Hose and 907 Epoxy 1998/02/05

Sure Seal/I-600 Epoxy Injection System Sure Seal Injection Hose and I-600 EpoxyGrout

2007/05/18

Sure Seal/Sikadur 673 Epoxy InjectionSystem

Sure Seal Injection Hose and Sikadur 673Epoxy Grout

2014/04/01

The Ganawa Company Ltd.397 Frankcom St.Ajax ON L1S 1R4Tel: 905-686-5203Fax: 905-686-4763Email: [email protected]: http://www.ganawa.ca/

Poly-Tube I 600 Epoxy 1995/05/24

Structural List # 9.40.18Joints Page 1 of 1Expansion, Injection Systems for Armouring Date: 01-Dec-2016

SPECIFICATIONS: OPSS.PROV 920, OPSS.PROV 1210DRAWINGS: SS113-11, SS113-12CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 348: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 349: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:- MTO "J" Gap is measured between the inner faces of outer steel extrusion.- Seals shall be supplied in single length only.- Joints (separation beams) shall not be field spliced

Company Product Model "J" Gap Min "J" Gap Max Type (support barconfiguration)

Fabricator:Goodco Z-Tech807 Marshall Street, Suite 100,Laval QC H7S 1J9CanadaTel: 450-786-1300Fax: 450-786-1301Toll Free: 800-361-3510Web: www.goodcoztech.wsOntario Source:Goodco Z-Tech1739 Drew RoadMississauga ON L5S 1J5Tel: 800-361-3510Fax: 450-786-1301Web: www.goodcoztech.ws

LG-3 252 402 Single support bar

LG-4 363 563 Single support bar

LG-5 474 724 Single support bar

LG-6 585 885 Single support bar

LG-7 696 1046 Single support bar

LG-8 807 1207 Single support bar

Fabricator:Thorold Welding and FabricatingLtd.Ontario Source:Watson Bowman Acme Inc10 Marthclare AveDon Mills ON M3A 1E2CanadaTel: 416-254-0048Fax: 416-386-0311Toll Free: 800-677-4922Email: [email protected]: www.wbacorp.com

E-160 116 236 Multi support bar

E-240 212 392 Multi support bar

E-320 308 548 Multi support bar

E-400 404 704 Multi support bar

E-480 500 860 Multi support bar

E-560 596 1016 Multi support bar

E-640 692 1072 Multi support bar

Structural List # 9.40.20Joints Page 1 of 1Expansion, Modular Date: 02-Jun-2014

SPECIFICATIONS: OPSS.PROV 920DRAWINGS: Manufacturer's

Drawings, SS113-20, SS113-21, SS113-22CUSTODIAL OFFICE : Bridge Office - (905) 704-2351 Bidders Tendering Queries call (905) 704-2203

Page 350: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 351: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:MTO Gap Rating shown in mm is measured between the inner faces of steel plates.

Company ProductIdentity

Product Model Company ID-# Effective Date Gap Min Gap Max

A.J. Braun Mfg. Limited116 Hanson AvenueKitchener ON N2C 2E2Tel: 519-745-5812Fax: 519-745-0271Email: [email protected]: www.ajbraun.com

SymmetricalSealing System

HHI-75 2017/04/01 30 100

Goodco Z-Tech1739 Drew RoadMississauga ON L5S 1J5Tel: 800-361-3510Fax: 450-786-1301Web: www.goodcoztech.ws

Fabricator:Goodco Z-Tech807 Marshall Street, Suite 100,Laval QC H7S 1J9CanadaTel: 450-786-1300Fax: 450-786-1301Toll Free: 800-361-3510Web: www.goodcoztech.ws

SERIES 1100GOODFLEX

FL-75 2017/04/01 35 100

The Ganawa Company Ltd.397 Frankcom St.Ajax ON L1S 1R4Tel: 905-686-5203Fax: 905-686-4763Email: [email protected]: http://www.ganawa.ca/

Canflex A GAN1-ABGAN2-ADBGAN3-APGAN4-ADP

2016/12/28 25 100

Watson Bowman Acme Inc10 Marthclare AveDon Mills ON M3A 1E2CanadaTel: 416-254-0048Fax: 416-386-0311Toll Free: 800-677-4922Email: [email protected]: www.wbacorp.com

Fabricator:Thorold Welding and FabricatingLtd.

Fabrospan FR100D WBA-A1 2016/12/28 25 100

Structural List # 9.40.24Joints Page 1 of 2Expansion, Strip Seals Anchored in Concrete, Type A, Steel Plate ClampingDevice

Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 920, OPSS.PROV 1210DRAWINGS: SS113-11, SS113-12, Manufacturer's DrawingsCUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 352: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

Product Model Company ID-# Effective Date Gap Min Gap Max

Wercholoz Canada Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-5064Fax: 905-560-7070Email: [email protected]: www.wercholoz.com

Fabricator:Advance Welding & Mfg. (1992) Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-3030Fax: 905-560-7070Email: [email protected]: www.advance-welding.com

Wercho System C-251M WCI-A1 2017/01/04 35 100

Structural List # 9.40.24Joints Page 2 of 2Expansion, Strip Seals Anchored in Concrete, Type A, Steel Plate ClampingDevice

Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 920, OPSS.PROV 1210DRAWINGS: SS113-11, SS113-12, Manufacturer's DrawingsCUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 353: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:MTO Gap Rating is measured between the inner faces of stop bars.

Company ProductIdentity

ProductModel

CompanyID-#

EffectiveDate

Gap Min Gap Max ProductNotes

A.J. Braun Mfg. Limited116 Hanson AvenueKitchener ON N2C 2E2Tel: 519-745-5812Fax: 519-745-0271Email: [email protected]: www.ajbraun.com

W-100 AJB-C1 2011/06/28 40 100

Goodco Z-Tech1739 Drew RoadMississauga ON L5S 1J5Tel: 800-361-3510Fax: 450-786-1301Web: www.goodcoztech.ws

Fabricator:Goodco Z-Tech807 Marshall Street, Suite 100,Laval QC H7S 1J9CanadaTel: 450-786-1300Fax: 450-786-1301Toll Free: 800-361-3510Web: www.goodcoztech.ws

W-100 GCL-C1 1992/02/17 40 100

Z-Tech ZT 300 H GCL-C2 2013/06/19 35 100

Z-Tech ZT-300HR GCL-C3 2013/06/19 30 100

Z-Tech ZT-700HR GCL-C4 2013/04/11 30 150 RESTRICTEDUSE FORLONGMOVEMENT,SLIDINGPLATE,JOINTS.Sliding plateproductdrawings arenot availableas yet.

The Ganawa Company Ltd.397 Frankcom St.Ajax ON L1S 1R4Tel: 905-686-5203Fax: 905-686-4763Email: [email protected]

Canflex C GAN-C1 2000/08/04 40 100 Restricted usefor minimumballast wallwidth 325mm.

Ganflex C GAN-C2 2011-04-26 50 100

Structural List # 9.40.27Joints Page 1 of 2Expansion, Strip Seals Anchored in Concrete, Type C, Retainers and StopBars

Date: 02-Dec-2013

SPECIFICATIONS: OPSS.PROV 920, OPSS 1210DRAWINGS: SS113-11, SS113-12, Manufacturer's DrawingsCUSTODIAL OFFICE : Bridge Office - (905) 704-2351 Bidders Tendering Queries call (905) 704-2203

Page 354: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company ProductIdentity

ProductModel

CompanyID-#

EffectiveDate

Gap Min Gap Max ProductNotes

Watson Bowman Acme Inc10 Marthclare AveDon Mills ON M3A 1E2CanadaTel: 416-254-0048Fax: 416-386-0311Toll Free: 800-677-4922Email: [email protected]: www.wbacorp.com

Fabricator:Thorold Welding and FabricatingLtd.

PressureSealingSystems

PS 51 WBA-C1 1988/04/11 40 75

PressureSealingSystems

PS 100 WBA-C2 1988/04/11 40 100

Strip Seal SC 400System 1

WBA-C1 1988/07/27 35 100 Restricted usefor minimumballast wallwidth 340mm.

Strip Seal SC 400System 2

WBA-C4 1988/07/27 35 100 Restricted usefor minimumballast wallwidth 340mm.

Wercholoz Canada Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-5064Fax: 905-560-7070Email: [email protected]

Fabricator:Advance Welding & Mfg. (1992) Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-3030Fax: 905-560-7070Email: [email protected]

Wercho 135.100 WCI-C1 1994/12/01 35 100

WerchoSystems

141 WCI-C2 1999/07/29 35 100

WerchoSystems

141 Angled WCI-C3 1999/07/29 35 100 Restricted usefor minimumballast wallwidth of 325mm.

Magnatite C WCI-C4 1992/06/21 40 100 Restricted usefor minimumballast wallwidth of 325mm.

Structural List # 9.40.27Joints Page 2 of 2Expansion, Strip Seals Anchored in Concrete, Type C, Retainers and StopBars

Date: 02-Dec-2013

SPECIFICATIONS: OPSS.PROV 920, OPSS 1210DRAWINGS: SS113-11, SS113-12, Manufacturer's DrawingsCUSTODIAL OFFICE : Bridge Office - (905) 704-2351 Bidders Tendering Queries call (905) 704-2203

Page 355: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Structural Joints Expansion, Strip Seals in Elastomeric Concrete, Type A, Steel Plate Clamping Device

DSM # 9.40.30Page 1

Date: 01-Aug-2005

SPECIFICATIONS: OPSS 1210, OPSS 920 DRAWINGS: Manufacturer's Drawings, SS113-11 - Dec 2004, SS113-12 - Dec 2003 CUSTODIAL OFFICE: Bridge Office - (905) 704-2405 Bidders Tendering Queries call (905) 704-2203

NOTES: MTO Gap Rating is measured between inner top faces. Company Product Identity Product Model Company ID-# Effective Date Gap Min Gap Max

Polycrete BI-50 AJB-AE1 1994/05/03 30 100 A.J. Braun Mfg. Limited 116 Hanson Avenue Kitchener ON N2C 2E2 Tel: 519-745-5812 Fax: 519-745-0271 Email: [email protected]

Polycrete BI-75 AJB-AE2 1994/05/03 20 100

The Ganawa Company Ltd. 397 Frankcom St. Ajax ON L1S 1R4 Tel: 905-686-5203 Fax: 905-686-4763 Email: [email protected]

Canflex CFX 122H 1997/07/28 25 100

Watson Bowman Acme Inc 71 Underhill Drive Don Mills ON M3A 2J8 Tel: 416-254-0048 Fax: 416-386-0311 Toll Free: 800-677-4922 Homepage: www.wbacorp.com Fabricator: Thorold Welding and Fabricating Ltd.

Fabrospan - Wabocrete - FMV

FR100D WBA-AE1 1995/11/01 25 100

Wercholoz Canada Inc. 95 Cascade St, Unit 2 Hamilton ON L8E 3B7 Tel: 905-560-5064 Fax: 905-560-7070 Email: [email protected] Fabricator: Advance Welding & Mfg. (1992) Inc. 95 Cascade St, Unit 2 Hamilton ON L8E 3B7 Tel: 905-560-3030 Fax: 905-560-7070 Email: [email protected]

Werchocrete 500 WCI-AE1 1997/04/30 40 100

Page 356: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 357: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Structural Joints Expansion, Strip Seals in Elastomeric Concrete, Type C, Retainers

DSM # 9.40.32Page 1

Date: 01-Aug-2005

SPECIFICATIONS: OPSS 1210, OPSS 920 DRAWINGS: Manufacturer's Drawings, SS113-11 - Dec 2004, SS113-12 - Dec 2003 CUSTODIAL OFFICE: Bridge Office - (905) 704-2405 Bidders Tendering Queries call (905) 704-2203

NOTES: MTO Gap Rating is measured between inner top faces of steel extrusions. Company Product Identity Product Model Company ID-# Effective Date Gap Min Gap Max The Ganawa Company Ltd. 397 Frankcom St. Ajax ON L1S 1R4 Tel: 905-686-5203 Fax: 905-686-4763 Email: [email protected]

Canflex CFX 122H 1997/07/28 40 100

Watson Bowman Acme Inc 71 Underhill Drive Don Mills ON M3A 2J8 Tel: 416-254-0048 Fax: 416-386-0311 Toll Free: 800-677-4922 Homepage: www.wbacorp.com Fabricator: Thorold Welding and Fabricating Ltd.

Wabocrete - FMV S-400 Seal with Retainer Shape "A"

WBA-AE1 1989/03/30 35 100

Wercholoz Canada Inc. 95 Cascade St, Unit 2 Hamilton ON L8E 3B7 Tel: 905-560-5064 Fax: 905-560-7070 Email: [email protected] Fabricator: Advance Welding & Mfg. (1992) Inc. 95 Cascade St, Unit 2 Hamilton ON L8E 3B7 Tel: 905-560-3030 Fax: 905-560-7070 Email: [email protected]

Werchocrete 500 Wercho 141 Extrusion and Seal

WCI-AE1 1999/07/29 35 100

Page 358: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 359: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

StructuralJointsExpansion, Strip Seals in Preformed Retainer, Anchored on Existing Armouring

DSM # 9.40.33Page 1

Date: 01-Feb-2008

SPECIFICATIONS: OPSS 1210, OPSS 920 DRAWINGS: Manufacturer's Drawings, SS113-11, SS113-12 CUSTODIAL OFFICE: Bridge Office - (905) 704-2405 Bidders Tendering Queries call (905) 704-2203

MTO Gap Rating is measured between inner top faces of extrusions at deck surface. Company Product Identity Product Model Gap Min Gap Max Goodco Z-Tech1739 Drew Road Mississauga ON L5S 1J5 Tel: 905-671-3460 Fax: 905-671-3924 Email: [email protected] Homepage: www.goodcoztech.ws

Fabricator: Goodco Z-Tech807 Marshall Street, Suite 100, Laval QC H7S 1J9 Tel: 450-786-1300 Fax: 450-786-1301 Toll Free: 800-361-3510 Email: [email protected] Homepage: www.goodcoztech.ws

Z-Tech ZT-300H 35 100

Watson Bowman Acme Inc71 Underhill Drive Don Mills ON M3A 2J8 Tel: 416-254-0048 Fax: 416-386-0311 Toll Free: 800-677-4922 Homepage: www.wbacorp.com

Fabricator: Thorold Welding and Fabricating Ltd.

Strip Seal S-400 Seal With Retainer Shape "A" 35 100

Wercholoz Canada Inc.95 Cascade St, Unit 2 Hamilton ON L8E 3B7 Tel: 905-560-5064 Fax: 905-560-7070 Email: [email protected]

Fabricator: Advance Welding & Mfg. (1992) Inc.95 Cascade St, Unit 2 Hamilton ON L8E 3B7 Tel: 905-560-3030 Fax: 905-560-7070 Email: [email protected]

Wercho 141 Wercho 141 Extension & Seal 35 100

Page 360: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 361: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

CompanyA.J. Braun Mfg. Limited116 Hanson AvenueKitchener ON N2C 2E2Tel: 519-745-5812Fax: 519-745-0271Email: [email protected]: www.ajbraun.com

Fabricator:Advance Welding & Mfg. (1992) Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-3030Fax: 905-560-7070Email: [email protected]: www.advance-welding.comOntario Source:Wercholoz Canada Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-5064Fax: 905-560-7070Email: [email protected]: www.wercholoz.com

AMG Metals Inc.34 Holtby AveBrampton ON L6X 2M1CanadaTel: 905-453-6113Fax: 905-453-6111Email: [email protected]: www.amgmetals.com

Canada Culvert605 Sheldon DriveCambridge ON N1T 2K1CanadaTel: 519-620-6000Fax: 519-620-6042Toll Free: 1-800-565-1152Web: www.canadaculvert.com

Capitol Welding Ltd.

Fuhrscher Installations Inc.33 Howard PlaceKitchener ON N2K 2Z4CanadaTel: 519-747-3993Fax: 519-747-5759Email: [email protected]

Structural List # 9.60.30Railing Page 1 of 2Bridge Guide Rail Date: 02-Oct-2017

SPECIFICATIONS: OPSS.PROV 908DRAWINGS: SS010-42A/SS10-42A, SS010-43A/SS10-43A, SS010-40A/SS10-40A, SS010-40B/SS10-40B, SS010-40C/SS10-40C, SS010-42B/SS10-42B, SS010-43B/SS10-43B, SSD 0110-0021, SSD 0110-0037, SSD 0110-0038, SSD 0110-0039, SSD 0110-0046, SSD 0110-0047, SSD 0110-0049, SSD 0110-0085, SSD 0110-0096

CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 362: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

CompanyFabricator:G&P Welding Ironworks1872 Seymour StreetNorth Bay ON P1A 0E2Tel: 705-472-5454Fax: 705-472-0610Email: [email protected]: www.gpwelding.com

Spina's Steel Workers Co. Ltd.229 Wilkinson Rd.Brampton ON L6T 4M2CanadaTel: 905-453-2111Fax: 905-453-8334Email: [email protected]: www.spinasteel.com

The Ganawa Company Ltd.397 Frankcom St.Ajax ON L1S 1R4Tel: 905-686-5203Fax: 905-686-4763Email: [email protected]: http://www.ganawa.ca/

Structural List # 9.60.30Railing Page 2 of 2Bridge Guide Rail Date: 02-Oct-2017

CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

SPECIFICATIONS: OPSS.PROV 908DRAWINGS: SS010-42A/SS10-42A, SS010-43A/SS10-43A, SS010-40A/SS10-40A, SS010-40B/SS10-40B, SS010-40C/SS10-40C, SS010-42B/SS10-42B, SS010-43B/SS10-43B, SSD 0110-0021, SSD 0110-0037, SSD 0110-0038, SSD 0110-0039, SSD 0110-0046, SSD 0110-0047, SSD 0110-0049, SSD 0110-0085, SSD 0110-0096

Page 363: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTE:Applicable only to non-coated and epoxy coated mechanical connectors for reinforcing steel bars that conform to OPSS 1440.

Company Product Type Product NameBarsplice Products Inc.4900 Webster St.Dayton OH 45414United StatesTel: 937-275-8700Fax: 937-275-9566Email: [email protected]: www.barsplice.com

Swaged Sleeve Bargrip

Threaded BPI Barsplicer XP

Form Saver BPI Barsplicer XP Flanged Coupler

Threaded, Swaged Sleeve Taper Threaded Grip-Twist

Threaded, Swaged Sleeve Taper Threaded Grip-Twist Transition

Threaded, Swaged Sleeve Taper Threaded Grip-Twist Position Coupler

Threaded, Swaged Sleeve, Form Saver Taper Threaded Grip-Twist Flanged Coupler

Threaded, Swaged Sleeve Taper Threaded Grip-Twist Doughnut

Threaded, Swaged Sleeve Taper Threaded Grip-Twist Structural Connector

Dayton Superior Canada Ltd.6650 Pacific CircleMississauga ON L5T 1V6Tel: 416-798-2000Fax: 416-798-1103Web: www.daytonsuperior.com

Form Saver DBR Coupler System

Forged Bar Dowel Bar Splicer

Threaded Taper Lock

DYWIDAG Systems InternationalCanada Ltd.

Hot-Rolled Threadbar Coupler Bar Assembly

National Concrete Accessories172 Bethridge RoadToronto ON M9W 1N3CanadaTel: 416-245-4720Fax: 416-242-2727Web:www.nca.ca/nca/products/default.asp

Form Saver Lenton Form Saver

Pentair34600 Solon RoadSolon OH 44139Tel: 440-248-0100Fax: 440-248-0723Toll Free: 800-853-0878Email: [email protected]: www.erico.com

Form Saver Lenton Formsaver

Threaded Lenton Taper

Structural List # 9.65.58Reinforcement Page 1 of 2Reinforcing Steel Bars, Mechanical Connectors Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440, OPSS 1442*DRAWINGS:CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 364: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Type Product NamePentair34600 Solon RoadSolon OH 44139Tel: 440-248-0100Fax: 440-248-0723Toll Free: 800-853-0878Email: [email protected]: www.erico.com

Distributor:National Concrete Accessories172 Bethridge RoadToronto ON M9W 1N3CanadaTel: 416-245-4720Fax: 416-242-2727Web:www.nca.ca/nca/products/default.asp

Form Saver Lenton Form Saver

Threaded Lenton Taper

Structural List # 9.65.58Reinforcement Page 2 of 2Reinforcing Steel Bars, Mechanical Connectors Date: 01-Jun-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440, OPSS 1442*DRAWINGS:CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 365: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:Only epoxy coated steel supplied by the epoxy coaters listed below may be used (this includes epoxy coated Dowel and Tie Bar for concrete pavement).

Company Product Name Fabricator Epoxy Coater Acceptanceconditions

AGF - C&T Inc.93 Passmore AvenueScarborough ON M1V 4S9CanadaTel: 416-291-7349Fax: 416-291-0698Web: www.agfct.com

Reinforcing Steel, EpoxyCoated

Yes

AGF - Rebar Inc. (Albrecht Division)80 Centennial DriveKitchener ON N2B 3G1CanadaTel: 519-576-4660Fax: 519-576-9131Toll Free: 1-866-276-6604Web: www.albrecht.agfsteel.com/

Reinforcing Steel, EpoxyCoated

Yes

Fabricator:AGF Steel Inc. (Ottawa Division)3419 Hawthorne RoadOttawa ON K1G 4G2Tel: 613-736-1500Fax: 613-736-0844Web: www.agfsteel.com

Reinforcing Steel, EpoxyCoated

Yes

Fabricator:Ambassador Steel, a Harris RebarCompany1050 St. George Rd.Bourbonnais IL 60914United StatesTel: 815-562-2818Email: [email protected]: www.harrisrebar.com

Reinforcing Steel, EpoxyCoated

Yes

American Highway Technology byDayton Superior Corp2150 B South Route 45-52Kankakee IL 60901USATel: 815-936-3300Fax: 815-936-3306Toll Free: 1-800-571-8796Email: [email protected]:www.americanhighwaytechnology.com

Dowel Bar, Epoxy Coated Yes Yes

Structural List # 9.65.70Reinforcement Page 1 of 3Reinforcing Steel, Epoxy Coated, Coaters & Fabricators Date: 02-Oct-2017

SPECIFICATIONS: OPSS 350, OPSS.PROV 905, OPSS 1442*DRAWINGS: OPSD 0552.0600CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 366: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Fabricator Epoxy Coater Acceptanceconditions

Anchor Rebar Supply Inc.1645 Sydenham RoadKingston ON K7L 4V4Tel: 613-546-6683Fax: 613-546-6230Toll Free: 800-223-0012Email: [email protected]: www.anchorrebar.com

Reinforcing Steel, EpoxyCoated

Yes

Armatures Bois-Francs Inc.249, boul. BonaventureVictoriaville QC G6T 1V5Tel: 819-758-7501Fax: 819-758-2544Email: [email protected]: www.abf-inc.com

Reinforcing Steel, EpoxyCoated

Yes

Epoxicote Inc., Quebec, A Divisionof Harris Steel Limited12450 Boul. IndustrielPoint-Aux-TremblesLongueuil QC H1B 5M5Tel: 514-640-5085Fax: 514-640-1115Email: [email protected]

Reinforcing Steel, EpoxyCoated

Yes

Gilbert Steel Ltd.1650 Britannia Road EastMississauga ON L4W 1J2CanadaTel: 905-670-5771Fax: 905-670-5668Email: [email protected]: www.gilbertsteel.com

Reinforcing Steel, Tie Bar,Epoxy Coated

Yes

Harris Rebar980 Intermodal DriveBrampton ON L6T 0B5Tel: 905-799-1220Fax: 905-799-0221Web: www.harrisrebar.com

Reinforcing Steel, EpoxyCoated

Yes

Harris Rebar a Division of HarrisSteel Limited120 Main St., Harbour ParkThunder Bay ON P7B 6S4CanadaTel: 807-345-2543Fax: 807-345-7169Email: [email protected]: www.harrisrebar.com

Reinforcing Steel, EpoxyCoated

Yes

Structural List # 9.65.70Reinforcement Page 2 of 3Reinforcing Steel, Epoxy Coated, Coaters & Fabricators Date: 02-Oct-2017

SPECIFICATIONS: OPSS 350, OPSS.PROV 905, OPSS 1442*DRAWINGS: OPSD 0552.0600CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 367: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Fabricator Epoxy Coater Acceptanceconditions

Harris Rebar, A Division of HarrisSteel Limited318 Arvin AvenueStoney Creek ON L3E 2M2Tel: 905-662-5700Fax: 905-573-5264Email: [email protected]: www.harrisrebar.com

Reinforcing Steel, EpoxyCoated

Yes Yes

Dowel Bar, Epoxy Coated Yes Yes

Tie Bar, Epoxy Coated Yes Yes

Mansteel Rebar Ltd.105 Industrial RoadRichmond Hill ON L4C 2Y4CanadaTel: 905-737-9797Fax: 905-737-9704Email: [email protected]: www.mansteelrebar.com

Reinforcing Steel, EpoxyCoated

Yes

Fabricator:Salit Steel Ltd.222 Baseline Road EastBowmanville ON L1C 1A4CanadaTel: 905-623-5544Fax: 905-623-5564Toll Free: 866-623-5544Email: [email protected]: www.salitsteel.com

Reinforcing Steel, EpoxyCoated

Yes

Salit Steel Ltd.35 Ivan RoadChatham ON N7M 5J4CanadaTel: 519-380-5327Email: [email protected]: www.salitsteel.com

Reinforcing Steel, EpoxyCoated

Yes

Salit Steel Ltd.P.O. Box 837, 7771 Stanley Ave. S.Niagara Falls ON L2E 6V6CanadaTel: 905-356-3820Fax: 905-356-1679Toll Free: 800-263-7110Email: [email protected]: www.salitsteel.com

Reinforcing Steel, EpoxyCoated

Yes

Salit Steel Ltd.90 Center StreetWelland ON L3B 5N9CanadaTel: 905-735-9993Email: [email protected]: www.salitsteel.com

Reinforcing Steel, EpoxyCoated

Yes

Structural List # 9.65.70Reinforcement Page 3 of 3Reinforcing Steel, Epoxy Coated, Coaters & Fabricators Date: 02-Oct-2017

SPECIFICATIONS: OPSS 350, OPSS.PROV 905, OPSS 1442*DRAWINGS: OPSD 0552.0600CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 368: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 369: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:Organic coating and pretreatment constitute a Coating System.Coating Systems have been proven by independent laboratory testing to meet the requirements of ASTM, ANNEX A1, MTO Laboratory Tests LS-420and LS-421

Company Product Name Pretreatment Colour Patching Compound3M Canada, Manitoba400 Route 100Morden MB R6M 1Z9Tel: 204-822-6284Fax: 204-822-4181Toll Free: 800-861-8126

Canadian Source:3M Canada - Traffic Safety andSecurity Systems Division300 Tartan Drive PO Box 5757London ON N5V 3R6Tel: 519-451-2500Toll Free: 800-265-1840Web: www.3m.com/canada

Scotchkote 413 Gardobond VP4504 Green Scotchkote 413/215 PCPatch Compound

Scotchkote 215 Gardobond VP 4504 Green Scotchkote 413/215 PCPatch Compound

Scotchkote 446 NONE Nonflexible only forDowel Bars

Blue

Akzo Nobel Coatings, Inc. RB-600 HKF30R Gardobond VP4504 Green

Axalta Coating Systems Nap-Gard 7-2719 Gardobond VP4504 Green

Nap-Gard PatchCompound 7-2727

Green Nap-Gard PatchCompound 7-2727

Dayton Superior Canada Ltd.396 Attwell DriveRexdale ON M9W 5C3Tel: 416-798-2000Fax: 416-798-1103Web: www.daytonsuperior.com

Steel Coating - J-62(Aerosol Spray Can)

Green J-62 Aerosol Spray Can

Morton Powder Coatings Corvel Green 10-6071 Gardobond C4504 ER Green Corvel Green 10-6053TU

The Valspar Corporation (MO)1136 Fayette StreetN. Kansas City MO 64116-4160USATel: 816-421-7400Fax: 816-421-4563Toll Free: 1-800-800-1900Web: www.valspar.com

Greenbar 720A009 (Lilly ) Gardobond C4504 ER Green

Green Rebar Patch ;EEG0034/CEC0091

Green Green Rebar Patch ;EEG0034/CEC0091

Structural List # 9.65.73Reinforcement Page 1 of 1Reinforcing Steel, Organic Coating System, and Patching Compounds Date: 01-Apr-2015

SPECIFICATIONS: OPSS.PROV 905, OPSS 1443*DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705 Bidders Tendering Queries call (905) 704-2203

Page 370: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 371: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Note:Only reinforcing stainless steel manufactured by the mills identified as "Mills" may be used.Only reinforcing stainless steel produced by the fabricators identified as "Fabricators" may be used.Stainless Steel Reinforcing Type XM28 (USN-S2400) will be permitted for use only on contracts awarded before October 24, 2011

Company Product Name Mills, Fabricators andDistributors

Product Type and Bar Sizes SupplyStatus

Acciaierie Valbruna36100 Venecia (Italy)Viale della Scienza-Z.I.ItalyTel: 0444/963821Fax: 0444/963836

Distributor:Valbruna Canada Ltd.8724 Holgate Crescent, High Point BusinessParkMilton ON L9T 5Z1Tel: 905-878-3288Fax: 905-693-8832Cellular: 416-301- 8873Email: [email protected]: www.reval-stainless-steel.com

Reinforcing Steel,Stainless

Mill - Acciaierie Valbruna,Italy

Type - 316LN and 2205, Sizes - 10,12, 16, 20, 25, 32 and 40mm. Plus10M, 15M, 20M,

Fabricator:AGF - Acier ATR1125, rue du Père-DanielTrois-Rivières QC G9A 2W9caTel: 8193761686Fax: (819) 376-9796

Stainless Steel Rebar Fabricator

AGF - C&T Inc.93 Passmore AvenueScarborough ON M1V 4S9CanadaTel: 416-291-7349Fax: 416-291-0698Web: www.agfct.com

Reinforcing Steel,Stainless

Fabricator

AGF - Rebar Inc. (Albrecht Division)80 Centennial DriveKitchener ON N2B 3G1CanadaTel: 519-576-4660Fax: 519-576-9131Toll Free: 1-866-276-6604Web: www.albrecht.agfsteel.com/

Reinforcing Steel,Stainless

Fabricator

AGF Steel Inc. (Ottawa Division)3419 Hawthorne RoadOttawa ON K1G 4G2Tel: 613-736-1500Fax: 613-736-0844Web: www.agfsteel.com

Reinforcing Steel,Stainless

Fabricator

Structural List # 9.65.76Reinforcement Page 1 of 4Reinforcing Steel, Stainless, Mills and Fabricators Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440, CSA-G30.18-09, ASTM A955/A955M-15, ASTMA276/A276M-15

DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 372: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Mills, Fabricators andDistributors

Product Type and Bar Sizes SupplyStatus

Anchor Rebar Supply Inc.1645 Sydenham RoadKingston ON K7L 4V4Tel: 613-546-6683Fax: 613-546-6230Toll Free: 800-223-0012Email: [email protected]: www.anchorrebar.com

Reinforcing Steel,Stainless

Fabricator

Armatures Bois-Francs Inc.249, boul. BonaventureVictoriaville QC G6T 1V5Tel: 819-758-7501Fax: 819-758-2544Email: [email protected]: www.abf-inc.com

Reinforcing Steel,Stainless

Fabricator

Cogne Acciai Speciali SpaVia Paravera, 16Aosta 11100ItalyTel: +44 114 221 1987Email: [email protected]: www.cogne.com

Distributor:Cogne Specialty Steel USA, Inc277 Fairfield Road - STE 315Fairfield NJ 07004United StatesTel: 2127852456Fax: 9732271142Email: [email protected]: www.cogneusa.com

Reinforcing Steel,Stainless

Mill-Aosta, Itay Type - 2205, Sizes - 10, 12, 16, 20,25, 32 and 40mm. Plus 10M, 15M,20M, 25M, 30M, 35M,

Fabricator:Contractors Materials Company935 Wenstrup LaneWalton KY 41094United States

Stainless Steel Rebar Fabricator

Gilbert Steel Ltd.1650 Britannia Road EastMississauga ON L4W 1J2CanadaTel: 905-670-5771Fax: 905-670-5668Email: [email protected]: www.gilbertsteel.com

Reinforcing Steel,Stainless

Fabricator

Structural List # 9.65.76Reinforcement Page 2 of 4Reinforcing Steel, Stainless, Mills and Fabricators Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440, CSA-G30.18-09, ASTM A955/A955M-15, ASTMA276/A276M-15

DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 373: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Mills, Fabricators andDistributors

Product Type and Bar Sizes SupplyStatus

Harris Rebar980 Intermodal DriveBrampton ON L6T 0B5Tel: 905-799-1220Fax: 905-799-0221Web: www.harrisrebar.com

Reinforcing Steel,Stainless

Fabricator

Harris Rebar a Division of Harris SteelLimited120 Main St., Harbour ParkThunder Bay ON P7B 6S4CanadaTel: 807-345-2543Fax: 807-345-7169Email: [email protected]: www.harrisrebar.com

Reinforcing Steel,Stainless

Fabricator

Harris Rebar, A Division of Harris SteelLimited318 Arvin AvenueStoney Creek ON L3E 2M2Tel: 905-662-5700Fax: 905-573-5264Email: [email protected]: www.harrisrebar.com

Reinforcing Steel,Stainless

Fabricator

Mansteel Rebar Ltd.105 Industrial RoadRichmond Hill ON L4C 2Y4CanadaTel: 905-737-9797Fax: 905-737-9704Email: [email protected]: www.mansteelrebar.com

Reinforcing Steel,Stainless

Fabricator

North American Stainless6870 US Highway 42 EastGhent KY 41045United StatesTel: 1-800-499-7833Fax: 502-347-6001Toll Free: 800-499-7833Email:[email protected]: www.northamericanstainless.com

Reinforcing Steel,Stainless

Mill-Ghent, KY, USA Type - 316LN and 2205, Sizes -9.5mm to 32.2mm

Structural List # 9.65.76Reinforcement Page 3 of 4Reinforcing Steel, Stainless, Mills and Fabricators Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440, CSA-G30.18-09, ASTM A955/A955M-15, ASTMA276/A276M-15

DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 374: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Mills, Fabricators andDistributors

Product Type and Bar Sizes SupplyStatus

Outokumpu Stainless Bar, Inc.3043 Crenshaw ParkwayRichburg SC 29729USATel: 803-789-5383Fax: 803-789-3177Cellular: 630-651-3159Email: [email protected]: www.outokumpu.com

Reinforcing Steel,Stainless

Mill Richburg SC USA Type 2205 Sizes - #4 to #10 and15M ,20M

Stainless Steel Bar, InCoil

Mill - Richburg SC USA Stainless Steel Bar, in Coil

Outokumpu Stainless, Ltd. ASR Rod MillStevenson RoadSheffield Yorkshire S9 3XGTel: 44 114 242 1124Web: www.outokumpu.com

Reinforcing Steel,Stainless

ASR Rod Mill - SheffieldYorkshire UK

Type 316LN Sizes - 6mm to 25mm

Talley Metals / A Carpenter CompanyPO Box 2498Hartsville SC 29551United StatesTel: 843-335-7540Fax: 843-335-516Toll Free: 1-800-334-8324 x2191Email: [email protected]: www.stainless-rebar.com/talley.htm

Distributor:Carpenter Technology (Canada) Ltd6114 Edwards BlvdMississauga ON L5T 2V7CanadaTel: 905-564-5255Fax: 905-564-1909Email: [email protected]: www.cartech.com

Reinforcing Steel,Stainless

Mill- Talley Metals/Distributor-Carpenter

Reinforcing Steel, Stainless, Type316LN and 2205 Duplex, Sizes - All

Structural List # 9.65.76Reinforcement Page 4 of 4Reinforcing Steel, Stainless, Mills and Fabricators Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440, CSA-G30.18-09, ASTM A955/A955M-15, ASTMA276/A276M-15

DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 375: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:Only reinforcing steel manufactured by the mills listed under the header "Mill" may be used.

Company Product Name Fabricator MillAcier AGF Inc.2270 Rue Garneau Parc IndustrielLongueuil QC J4G 1E7Tel: 450-442-9494Fax: 450-674-9867Email: [email protected]

Reinforcing Steel, Uncoated Yes

Fabricator:AGF - Acier ATR1125, rue du Père-DanielTrois-Rivières QC G9A 2W9caTel: 8193761686Fax: (819) 376-9796

Reinforcing Steel, Uncoated Yes

AGF - C&T Inc.93 Passmore AvenueScarborough ON M1V 4S9CanadaTel: 416-291-7349Fax: 416-291-0698Web: www.agfct.com

Reinforcing Steel, Uncoated Yes

AGF - Rebar Inc. (Albrecht Division)80 Centennial DriveKitchener ON N2B 3G1CanadaTel: 519-576-4660Fax: 519-576-9131Toll Free: 1-866-276-6604Web: www.albrecht.agfsteel.com/

Reinforcing Steel, Uncoated Yes

AGF - Rebar Inc. (Dietrich Division)120 McMillan StLondon ON N5W 6C6CanadaTel: 519-455-2540Fax: 519-455-6300Toll Free: 800-663-1262

Reinforcing Steel, Uncoated Yes

AGF - Rebar Inc. (DMC Division)2788 Belisle DriveVal Caron ON P3N 1B3CanadaTel: 705-897-7474Fax: 705-897-8484Email: [email protected]

Reinforcing Steel, Uncoated Yes

Structural List # 9.65.80Reinforcement Page 1 of 8Reinforcing Steel, Uncoated, Fabricators and Mills Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 376: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Fabricator MillAGF Steel Inc. (Ottawa Division)3419 Hawthorne RoadOttawa ON K1G 4G2Tel: 613-736-1500Fax: 613-736-0844Web: www.agfsteel.com

Reinforcing Steel, Uncoated Yes

Anchor Rebar Supply Inc.1645 Sydenham RoadKingston ON K7L 4V4Tel: 613-546-6683Fax: 613-546-6230Toll Free: 800-223-0012Email: [email protected]: www.anchorrebar.com

Reinforcing Steel, Uncoated Yes

ArcelorMittal Long ProductsContrecoeur East3900 Route des AcieriesContrecoeur QC J0L 1C0Tel: 800-361-5664Fax: 450-392-2936Web: www.arcelormittal.com

Reinforcing Steel, Uncoated Yes

ArcelorMittal Long ProductsContrecoeur-Ouest2050 Route des AcieriesContrecoeur QC J0L 1C0Tel: 450-587-2012Fax: 450-587-1101Toll Free: 888-587-0066Web: www.arcelormittal.com

Reinforcing Steel, Uncoated Yes

ArcelorMittal Long ProductsLongueuil2555 Chemin du LacLongueuil QC J4N 1C1Tel: 450-442-7700Fax: 450-442-7721Web: www.arcelormittal.com

Reinforcing Steel, Uncoated Yes

Structural List # 9.65.80Reinforcement Page 2 of 8Reinforcing Steel, Uncoated, Fabricators and Mills Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 377: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Fabricator MillArmatures Bois-Francs Inc.249, boul. BonaventureVictoriaville QC G6T 1V5Tel: 819-758-7501Fax: 819-758-2544Email: [email protected]: www.abf-inc.com

Distributor:ABF Reinforcing Steel Inc.1375 Sault StreetOrleans ON K1E 1G8Tel: 613-841-7502Fax: 613-841-9180Email: [email protected]: www.abf-inc.com

Reinforcing Steel, Uncoated Yes

Con Cast Pipe Inc.299 Brock Road South,Puslinch ON N0B 2J0CanadaTel: 519-763-8655Fax: 519-763-1982Toll Free: 800-668-7473Email: [email protected]: www.concastpipe.com

Precast members Yes (limited to fabrication forCON-CAST products only).

Fabricator:Contractors Materials Company10320 S Medallion DrCincinnati OH 45241United StatesTel: 513-733-3000Fax: 513-956-3173Other: 513-719-0128Email: [email protected]: www.cmcmmi.com

Reinforcing Steel, Uncoated Yes

DECAST Ltd.8807 County Road 56Utopia ON L0M 1T0Tel: 705-734-2892Fax: 705-734-2920Toll free: 800-461-5632Web: www.decastltd.com

Precast members Yes (limited to fabrication forDECAST products only).

Gerdau BeaumontOld Hwy 90Beaumont TX 77704United StatesTel: 409-768-1211Web: www.gerdau.com

Reinforcing Steel, Uncoated Yes

Reinforcing Steel, Uncoated, CoilRebar

Yes

Structural List # 9.65.80Reinforcement Page 3 of 8Reinforcing Steel, Uncoated, Fabricators and Mills Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 378: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Fabricator MillGerdau Cambridge160 Orion Place, P.O. Box 1734Cambridge ON N1R 7G8Tel: 519-740-2488Fax: 519-623-2062Toll free: 800-265-7858Web: www.gerdau.com

Reinforcing Steel, Uncoated Yes

Gerdau Perth Amboy225 Elm StreetPerth Amboy NJ 08862United StatesTel: 732-316-4108Toll Free: 1-800-727-4826Web: www.gerdau.com

Reinforcing Steel, Uncoated Yes

Reinforcing Steel, Uncoated, CoilRebar

Yes

Gerdau SayrevilleNorth Crossman Rd.Sayreville NJ 08871-0249United StatesTel: 732-721-6600Fax: 732-721-4462Web: www.gerdau.com

Reinforcing Steel, Uncoated Yes

Gerdau SelkirkPO Box 2500, 27 Main StSelkirk MB R1A 2B4Tel: 204-284-5395Fax: 204-785-9011Toll Free: 800-665-0414Web: www.gerdau.com

Reinforcing Steel, Uncoated Yes

Gerdau WhitbyLasco Mill, Hopkins St. SouthWhitby ON L1N 5T1CanadaTel: 905-668-8811Fax: 905-668-6469Web: www.gerdau.com

Reinforcing Steel, Uncoated Yes

Gilbert Steel Ltd.1650 Britannia Road EastMississauga ON L4W 1J2CanadaTel: 905-670-5771Fax: 905-670-5668Email: [email protected]: www.gilbertsteel.com

Reinforcing Steel, Uncoated Yes

Structural List # 9.65.80Reinforcement Page 4 of 8Reinforcing Steel, Uncoated, Fabricators and Mills Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 379: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Fabricator MillHarris Rebar980 Intermodal DriveBrampton ON L6T 0B5Tel: 905-799-1220Fax: 905-799-0221Web: www.harrisrebar.com

Reinforcing Steel, Uncoated Yes

Harris Rebar a Division of HarrisSteel Limited120 Main St., Harbour ParkThunder Bay ON P7B 6S4CanadaTel: 807-345-2543Fax: 807-345-7169Email: [email protected]: www.harrisrebar.com

Reinforcing Steel, Uncoated Yes

Harris Rebar a Division of HarrisSteel Limited171 Cardevco Road P.O. Box 152Carp ON K0A 1L0CanadaTel: 613-836-8804Fax: 613-836-8842Fax:

Reinforcing Steel, Uncoated Yes

Harris Rebar a Division of HarrisSteel LimitedCounty Rd. #46 (2 blocks E. of WalkerRd.)Maidstone ON N0R 1K0CanadaTel: 519-737-6953Fax: 519-737-1077

Reinforcing Steel, Uncoated Yes

Harris Rebar a Division of HarrisSteel Limited152 Fielding RoadLively ON P3Y 1L5CanadaTel: 705-682-1222Fax: 705-897-6932

Reinforcing Steel, Uncoated Yes

Harris Rebar a Division of HarrisSteel Limited408 Neptune Cres.London ON N6M 1A1CanadaTel: 519-455-4570Fax: 519-455-7807

Reinforcing Steel, Uncoated Yes

Structural List # 9.65.80Reinforcement Page 5 of 8Reinforcing Steel, Uncoated, Fabricators and Mills Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 380: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Fabricator MillHarris Rebar a Division of HarrisSteel Limited5334 Brigden RoadSarnia ON N7T 7H3CanadaTel: 519-383-8260Fax: 519-383-8273

Reinforcing Steel, Uncoated Yes

Harris Rebar, A Division of HarrisSteel Limited318 Arvin AvenueStoney Creek ON L3E 2M2Tel: 905-662-5700Fax: 905-573-5264Email: [email protected]: www.harrisrebar.com

Reinforcing Steel, Uncoated Yes

Ivaco Rolling MillsPO Box 322L'Orignal ON K0B 1K0CanadaTel: 613-675-4671Toll Free: 800-463-7637 (RODS)Email: [email protected]: www.ivacorm.com

Reinforcing Steel, Uncoated CoilRebar, Sizes-10M,15M

Yes

Kimco Steel Sales Ltd.1325 John Counter Blvd P.O. Box 300Kingston ON K7L 4W1Tel: 613-544-1822Fax: 613-548-4653Toll free: 800-267-0902Email: [email protected]: www.kimcosteel.com

Reinforcing Steel, Uncoated Yes

MANA, Max Aicher North AmericaInc.Bar Mill855 Industrial DriveHamilton ON L8L 0B2Tel: 289-426-5670Fax: 289-426-5665Email: [email protected]: mana-barmill.com

Reinforcing Steel, Uncoated Yes

Mansteel Rebar Ltd.105 Industrial RoadRichmond Hill ON L4C 2Y4CanadaTel: 905-737-9797Fax: 905-737-9704Email: [email protected]: www.mansteelrebar.com

Reinforcing Steel, Uncoated Yes

Structural List # 9.65.80Reinforcement Page 6 of 8Reinforcing Steel, Uncoated, Fabricators and Mills Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 381: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Fabricator MillNucor Steel Auburn, Inc.25 Quarry Road, P.O. Box 2008Auburn NY 13021United StatesTel: 315-253-4561Fax: 315-253-5377Toll Free: 800-424-1494Web: http://www.nucor.com/

Reinforcing Steel, Uncoated Yes

Fabricator:Nucor Steel Kankakee, Inc.972 E. 4500 N. RoadBourbonnais IL 60914United StatesTel: 815-939-5575Fax: 815-939-5598Toll Free: 800-866-3131Email: [email protected]: www.nucor.com

Reinforcing Steel, Uncoated Yes

Nucor Steel Marion Inc.912 Cheney Ave.,Marion OH 43302United StatesTel: 800-333-4011Fax: 740-223-4365Office: 740-383-4011Web: www.nucorhighway.com

Reinforcing Steel, Uncoated Yes

Salit Steel Ltd.P.O. Box 837, 7771 Stanley Ave. S.Niagara Falls ON L2E 6V6CanadaTel: 905-356-3820Fax: 905-356-1679Toll Free: 800-263-7110Email: [email protected]: www.salitsteel.com

Reinforcing Steel, Uncoated Yes

Salit Steel Ltd.35 Ivan RoadChatham ON N7M 5J4CanadaTel: 519-380-5327Email: [email protected]: www.salitsteel.com

Reinforcing Steel, Uncoated Yes

Salit Steel Ltd.90 Center StreetWelland ON L3B 5N9CanadaTel: 905-735-9993Email: [email protected]: www.salitsteel.com

Reinforcing Steel, Uncoated Yes

Structural List # 9.65.80Reinforcement Page 7 of 8Reinforcing Steel, Uncoated, Fabricators and Mills Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 382: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Fabricator MillFabricator:Salit Steel Ltd.222 Baseline Road EastBowmanville ON L1C 1A4CanadaTel: 905-623-5544Fax: 905-623-5564Toll Free: 866-623-5544Email: [email protected]: www.salitsteel.com

Reinforcing Steel, Uncoated Yes

Structural List # 9.65.80Reinforcement Page 8 of 8Reinforcing Steel, Uncoated, Fabricators and Mills Date: 01-Dec-2017

SPECIFICATIONS: OPSS.PROV 905, OPSS.PROV 1440DRAWINGS:CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 383: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product Name Product Grade / Type StatusB&B FRP Manufacturing Inc.40 Millwick Drive,#9Toronto ON M9L 1Y3CanadaTel: 4167400377Email: [email protected]: www.MSTBAR.com

MST-BAR Grade III straight bar. Grade III bent bar. ConditionalQualification

Fiberline Composites Canada Inc.1009-30 Duke Street WestKitchener ON N2H 3W5CanadaEmail: [email protected]: www.fiberline.com

ComBAR GFRP Grade III straight bar. Grade III bent bar. Grade III straight bar withanchor head.

OK

Pultrall Inc.700 9th Street NorthThetford-Mines QC G6G 6Z5CanadaTel: 418-335-3202Fax: 418-335-5117Web: www.pultrall.com

V-Rod (GFRPReinforcing Bar)

Grade III straight bar. Grade III bent bar. Grade III straight bar withanchor head.

OK

TemCorp Industries Ltd.332 Glover RoadStoney Creek ON L8E 5M3CanadaEmail: [email protected]: www.temcorp.ca

TemBar Grade III straight bar. Grade III bent bar. ConditionalQualification

Ontario Source:TUF-BAR Canada Inc.7 Erin Park DriveErin ON N0B 1T0CanadaTel: 519-833-5050Email: [email protected]: https://www.tuf-bar.com/

TUF-BAR Grade III straight bar. Grade III bent bar. ConditionalQualification

TUF-BAR Inc.5522 36 St NWEdmonton AB T6B 3P3Tel: 1-780-462-8100Email: [email protected]: https://www.tuf-bar.com/

TUF-BAR Grade III straight bar. Grade III bent bar. OK

Structural List # 9.65.90Reinforcement Page 1 of 1Glass Fibre Reinforced Polymer - Reinforcing Bar Date: 01-Feb-2018

SPECIFICATIONS: SSP 999S02DRAWINGS: n/aCUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 384: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 385: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:-Systems eligible for inclusion in MTO work are defined during the project design phase and identified in contract documents.- Maximum angle is measured from the backface of the horizontal.- Maximum wall height is for each continuous tier at maximum slope.- Performance is a rating either High (H), Medium (M) or Low (L).- Appearance is a rating either High (H), Medium (M) or Low (L).- Acceptance is a category, with status of demonstration (DE) or Acceptance (A).- RSS is also identified as mechanically stabilized earth (MSE).

Company RSS No. Trade Identity Max Angle (Deg) Max Height Appearance AcceptanceArmtec Hamilton (Durisol)70 Frid Street Suite 1Hamilton ON L8R 3K4CanadaTel: 289-975-4404Fax: 905-521-8658Email: [email protected]: www.armtec.com

26 Durisol False AbutmentSystem (DFAS)

90 15 m H A

Ontario Source:Atlantic Industries Limited640 Waydom DriveAyr ON N0B 1E0CanadaTel: 519-622-8600Fax: 519-622-1372Toll free: 877-245-7473Email: [email protected]: www.ail.ca

46 Vist-A-Wall 90 10 m H A

51 Vist-A-Wall Grid Strip 90 10 m H A

Reinforced Earth Company Ltd.1550 Enterprise Road, Suite 229Mississauga ON L4W 4P4CanadaTel: 905-564-0896Fax: 905-564-2609Email: [email protected]: www.reinforcedearth.ca

9 Reinforced Earth,Cruciform (FA)

90 15 m H A

10 Reinforced Earth,Terratrelwith cast-in-place facing

90 15 m H A

53 GeoMega Wall withGeosynthetic Strips -GeoStrap / EcoStrap

90 9 m H DE

Canadian Source:Tensar International Corporation105 - 4020 Boul. Des SourcesMontreal QC H9B 3L5CanadaTel: 514-833-9179Email: [email protected]: www.tensarcorp.comOntario Source:Nilex40 Audia Court, Unit 2Vaughan ON L4K 3N4CanadaTel: 416-640-6002Fax: 416-640-6006Email: [email protected]: www.nilex.com

28 Full Height Concrete Panel,Tensar Tieback

90 8m H A

Structural List # 9.70.52Retainment of Soil Page 1 of 2Retained Soil Systems (RSS), False Abutment, High Performance Level Date: 01-Dec-2017

SPECIFICATIONS: Manufacturer's Standards, SP 599S22, SP 599S23DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : MERO - Foundation Design - (416) 235-3715

Page 386: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company RSS No. Trade Identity Max Angle (Deg) Max Height Appearance AcceptanceOntario Source:Terrafix Geosynthetics Inc.455 Horner AvenueToronto ON M8W 4W9Tel: 416-674-0363Fax: 416-674-1159Email: [email protected]: www.terrafixgeo.com

30 Full Height Concrete Panel,Tenax Tieback, TMPGG60-GG160 Tieback

90 8m H DE

Structural List # 9.70.52Retainment of Soil Page 2 of 2Retained Soil Systems (RSS), False Abutment, High Performance Level Date: 01-Dec-2017

SPECIFICATIONS: Manufacturer's Standards, SP 599S22, SP 599S23DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : MERO - Foundation Design - (416) 235-3715

Page 387: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:-Systems eligible for inclusion in MTO work are defined during the project design phase and identified in contract documents.- Maximum angle is measured from the backface of the horizontal.- Maximum wall height is for each continuous tier at maximum slope.- Performance is a rating either High (H), Medium (M) or Low (L).- Appearance is a rating either High (H), Medium (M) or Low (L).- Acceptance is a category, with status of demonstration (DE) or Acceptance (A).- RSS is also identified as mechanically stabilized earth (MSE).

Company RSS No. Trade Identity Max Angle (Deg) Max Height Appearance AcceptanceReinforced Earth Company Ltd.1550 Enterprise Road, Suite 229Mississauga ON L4W 4P4CanadaTel: 905-564-0896Fax: 905-564-2609Email: [email protected]: www.reinforcedearth.ca

8 Reinforced Earth,CRUCIFORM

90 15 m H DE

Structural List # 9.70.53Retainment of Soil Page 1 of 1Retained Soil Systems (RSS), True Abutment Date: 01-Dec-2016

SPECIFICATIONS: Manufacturer's Standards, SP 599S22, SP 599S23DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : MERO - Foundation Design - (416) 235-3715

Page 388: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 389: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:-Systems eligible for inclusion in MTO work are defined during the project design phase and identified in contract documents.- Maximum angle is measured from the backface of the horizontal.- Maximum wall height is for each continuous tier at maximum slope.- Performance is a rating either High (H), Medium (M) or Low (L).- Appearance (App in header) is a rating either High (H), Medium (M) or Low (L).- Acceptance (Acc in header)) is a category, with status of demonstration (DE) or Acceptance (A). Both eligible to bid MTO contracts.- RSS is also identified as mechanically stabilized earth (MSE).- Traffic Barrier - Y (yes) designates approved cast-in-place concrete traffic barrier for use with specific RSS.

Company RSSNo.

Trade Identity System MaxAngle(Deg)

MaxWallHt

App Acc Perfor-mance

Cast-In-PlaceTrafficBarrier

Armtec Hamilton (Durisol)70 Frid Street Suite 1Hamilton ON L8R 3K4CanadaTel: 289-975-4404Fax: 905-521-8658Email: [email protected]: www.armtec.com

2 Durisol Post and Panel 90 4m H A H Y

25 Durisol AnchoredRetaining Wall

Durisol Panel / T-Anchor 90 15m H A H Y

Armtec LP41 George StGuelph ON N1H 1S5CanadaTel: 800-265-9391Fax: 519-763-0437Toll Free: 877-527-6832Web: www.armtec.com

6 GEOWEB / MirafiXT

Stacked Geocell, Tieback 70 8m M A M N

23 GEOWEB / MirafiXT

Geocell on Slope Face,Tieback, Wrapped

55 6m L A L N

29 TC Mirafi WovenGeotextile

Temporary 90 8m L A L N

29 TC Mirafi WovenGeotextile

Temporary 90 8-10m L DE L N

32 GEOWEB / MirafiXT

Geocell on Slope Face,Tieback

35 6m L DE L N

41 TRM, Mirafi XT TRM, Geogrid Tieback 35 6m L DE L N

42 TRM, Mirafi XT TRM, Geogrid Tieback,Wrapped

45 6m L DE L N

Ontario Source:Atlantic Industries Limited640 Waydom DriveAyr ON N0B 1E0CanadaTel: 519-622-8600Fax: 519-622-1372Toll free: 877-245-7473Email: [email protected]: www.ail.ca

33 Atlantic Wire Wall Temporary 90 8m L DE L N

43 Vist-A-Wall Pre-cast Panel, Tie-Back 90 10m H A H Y

52 Vist-A-Wall GridStrip

Pre-cast panel, Grid Stripreinforcement

90 10m H A H Y

Structural List # 9.70.56Retainment of Soil Page 1 of 3Retained Soil Systems (RSS), Wall / Slope Date: 01-Feb-2018

SPECIFICATIONS: Manufacturer's Standards, SP 599S22, SP 599S23DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : MERO - Foundation Design - (416) 235-3715

Page 390: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company RSSNo.

Trade Identity System MaxAngle(Deg)

MaxWallHt

App Acc Perfor-mance

Cast-In-PlaceTrafficBarrier

Ontario Source:Layfield Geosynthetics andIndustrial Fabrics Ltd. (ON)117 Basaltic Road, Unit 2Vaughan ON L4K 1G4Tel: 905-761-9123Fax: 905-761-0035Toll Free: 888-436-4273Email: [email protected]: www.layfieldgeosynthetics.com

38 Enviro SlopeGeogrid Wrap

Layfield LP T-SeriesGeogrid and TRM,Wrapped

45 6m L DE L N

Ontario Source:Maccaferri Canada Ltd.400 Collier MacMillan Dr. Unit BCambridge ON N1R 7H7CanadaTel: 519-623-9990Fax: 519-623-1309Toll Free: 800-668-9396Email: [email protected]: http://www.maccaferri.ca

19 Gabion Wall Gabions 90 8m L A M N

17 TerrameshSystem

Gabion Basket, wire meshtie back

90 8m L DE M N

31 Green TerrameshSystem

Steep Slope 70 8m L DE M N

37 Terrawall Wire Mesh Facing andTieback

84 8m L DE M N

55 L Panel Wall Temporary (<5 years), WireMesh Facing, GeogridTieback

90 8m L DE L N

Reinforced Earth Company Ltd.1550 Enterprise Road, Suite 229Mississauga ON L4W 4P4CanadaTel: 905-564-0896Fax: 905-564-2609Email: [email protected]: www.reinforcedearth.ca

1 CRUCIFORM Reinforced Earth 90 15m H A H Y

13 TERRATREL Temporary 90 15m L A L N

10 TERRATREL Reinforced Earth withcast-in-place facing

90 10m H A H

54 GEOMEGA GeoMega Wall withGeoSynthetic Strips -GeoStrap / EcoStrap

90 9m H DE H N

Canadian Source:Tensar International Corporation105 - 4020 Boul. Des SourcesMontreal QC H9B 3L5CanadaTel: 514-833-9179Email: [email protected]: www.tensarcorp.comOntario Source:Nilex40 Audia Court, Unit 2Vaughan ON L4K 3N4CanadaTel: 416-640-6002Fax: 416-640-6006Email: [email protected]: www.nilex.com

8 Sierra BF Blanket , Tensar Tieback 35 6m L A L N

18 Sierra GF Wrap, Tensar Tieback 45 6m L A L N

5 Mesa Block, Tensar Tieback 90 8m H A M Y

17 Sierra WF Basket, Tensar Tieback,Temporary

90 8m L A L N

14 Sierra TF Stacked Geocell, TensarTieback

70 8m M A M N

27 ARES Full Height Concrete Panel,Tensar Tieback

90 8m A A H Y

Structural List # 9.70.56Retainment of Soil Page 2 of 3Retained Soil Systems (RSS), Wall / Slope Date: 01-Feb-2018

SPECIFICATIONS: Manufacturer's Standards, SP 599S22, SP 599S23DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : MERO - Foundation Design - (416) 235-3715

Page 391: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company RSSNo.

Trade Identity System MaxAngle(Deg)

MaxWallHt

App Acc Perfor-mance

Cast-In-PlaceTrafficBarrier

Ontario Source:Terrafix Geosynthetics Inc.455 Horner AvenueToronto ON M8W 4W9Tel: 416-674-0363Fax: 416-674-1159Email: [email protected]: www.terrafixgeo.com

34 TerraSlope 35 Blanket, Stratagrid 35 6m L DE L N

35 TerraSlope 45 Wrap, Stratagrid 45 6m L DE L N

36 TerraFort Full Height Concrete Panel,Tenax Tieback, TMPGG60-GG160 Tieback

90 8m H A H Y

39 TerraSlope Web Stacked Geocell, StratagridTieback

70 8m M A M N

44 TerraSteep 60 Wire Facing, GeogridTie-back

60 6m L DE L N

45 TerraSteep 90 Temporary, Wire-Face,Geogrid Tie-back

90 8m L DE L N

Ontario Source:The Miller Group (Gormley)287 Ram Forest RoadGormley ON L0H 1G0CanadaTel: 905-726-9518Fax: 905-726-4180Email: [email protected]: www.millergroup.ca

40 Miller Redi-RockGravity

Gravity Block Wall 90 2.7m H DE M N

Unilock Toronto287 Armstrong AvenueGeorgetown ON L7G 4X6CanadaTel: 416-646-9000Fax: 905-874-3034toll free: 800-UNILOCKEmail: [email protected]: www.unilock.com

Ontario Source:Risi Stone Systems on Behalf ofUnilock Ltd480 Harry Walker Parkway, Unit 10Newmarket ON L3Y 0B3Tel: 905 868 9255Fax: 905 868 9254Email: [email protected]: www.risistone.com

21 SIENA STONE Gravity Block Wall 90 2.5m H DE M N

50 Siena StoneGeogrid System

Segmental Block Wall,Geogrid Tie-back

90 5m H A M N

Structural List # 9.70.56Retainment of Soil Page 3 of 3Retained Soil Systems (RSS), Wall / Slope Date: 01-Feb-2018

SPECIFICATIONS: Manufacturer's Standards, SP 599S22, SP 599S23DRAWINGS: Manufacturer's DrawingsCUSTODIAL OFFICE : MERO - Foundation Design - (416) 235-3715

Page 392: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 393: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

NOTES:-Systems eligible for inclusion in MTO work are defined during the project design phase and identified in contract documents.- Maximum angle is measured from the horizontal.- Maximum wall height is for each continuous tier at maximum slope.- Performance is a rating either High (H), Medium (M) or Low (L).- Appearance is a rating either High (H), Medium (M) or Low (L).- Acceptance is a category, with status of demonstration (DE) or Acceptance (A).- RSS is also identified as mechanically stabilized earth (MSE).

Company RSS No. TradeIdentity

System Max Angle(Deg)

Max WallHeight

Appearance Acceptance

Tensar International CorporationPO Box 152 51 Community Centre RdBaltimore ON K0K 1C0CanadaTel: 416-428-6121Fax: 905-372-1179Email: [email protected]: www.tensarcorp.com

Ontario Source:Nilex40 Audia Court, Unit 2Vaughan ON L4K 3N4CanadaTel: 416-640-6002Fax: 416-640-6006Email: [email protected]: www.nilex.com

11 PRISM TensarGeogrid

NotApplicable

NotApplicable

NotApplicable

A

Structural List # 9.70.59Retainment of Soil Page 1 of 1Retained Soil Systems (RSS) Roadbase Embankment Date: 01-Dec-2016

SPECIFICATIONS: Manufacturer's Standards, RSS, MTO Generic Criteria, SP RSSjan01DRAWINGS: Contract Plans, Manufacturer's DrawingsCUSTODIAL OFFICE : MERO - Foundation Design - (416) 235-3715

Page 394: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 395: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

CompanyAMG Metals Inc.34 Holtby AveBrampton ON L6X 2M1CanadaTel: 905-453-6113Fax: 905-453-6111Email: [email protected]: www.amgmetals.com

Fabricator:Detra Builders IncOntario Source:A.J. Braun Mfg. Limited116 Hanson AvenueKitchener ON N2C 2E2Tel: 519-745-5812Fax: 519-745-0271Email: [email protected]: www.ajbraun.com

Indal Technologies Inc.

L&A Metal Works Inc.1968 Lincoln Rd, PO Box 371, Sta "A"Fredericton NB E3B 4Z9Tel: 506-458-1100Fax: 506-450-4879Email: [email protected]: www.lametalworks.ca

Ontario Source:Oak Power Corporation

Metal Pole-Lite Inc.1007 Route Edouard VIISt-Philippe QC J0L 2K0CanadaTel: 450-659-8951Fax: 450-444-3661Email: [email protected]: www.polelite.com

Spina's Steel Workers Co. Ltd.229 Wilkinson Rd.Brampton ON L6T 4M2CanadaTel: 905-453-2111Fax: 905-453-8334Email: [email protected]: www.spinasteel.com

Structural List # 9.75.15Sign Supports Page 1 of 2Bridge Mounted, Aluminum Date: 04-Apr-2017

SPECIFICATIONS: OPSS.PROV 915DRAWINGS: SS118-12 (Update), SS118-14 (Update), SS118-15

(Update), SS118-16 (Update), SS118-17(Update), SS118-18 (Update)

CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 396: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

CompanyValmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

Structural List # 9.75.15Sign Supports Page 2 of 2Bridge Mounted, Aluminum Date: 04-Apr-2017

SPECIFICATIONS: OPSS.PROV 915DRAWINGS: SS118-12 (Update), SS118-14 (Update), SS118-15

(Update), SS118-16 (Update), SS118-17(Update), SS118-18 (Update)

CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 397: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

CompanyA.J. Braun Mfg. Limited116 Hanson AvenueKitchener ON N2C 2E2Tel: 519-745-5812Fax: 519-745-0271Email: [email protected]: www.ajbraun.com

Advance Welding & Mfg. (1992) Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-3030Fax: 905-560-7070Email: [email protected]: www.advance-welding.com

Ontario Source:Wercholoz Canada Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-5064Fax: 905-560-7070Email: [email protected]: www.wercholoz.com

AMG Metals Inc.34 Holtby AveBrampton ON L6X 2M1CanadaTel: 905-453-6113Fax: 905-453-6111Email: [email protected]: www.amgmetals.com

Fabricator:Fuhrscher Installations Inc.33 Howard PlaceKitchener ON N2K 2Z4CanadaTel: 519-747-3993Fax: 519-747-5759Email: [email protected]

Spina's Steel Workers Co. Ltd.229 Wilkinson Rd.Brampton ON L6T 4M2CanadaTel: 905-453-2111Fax: 905-453-8334Email: [email protected]: www.spinasteel.com

Structural List # 9.75.20Sign Supports Page 1 of 2Column, Breakaway, Steel Date: 01-Feb-2018

SPECIFICATIONS: OPSS.PROV 915DRAWINGS: SS118-30 (Update)CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 398: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

CompanyValmont West Coast Engineering100 Ellis DriveBarrie ON L4N 9B2Tel: 800-645-1664Fax: 800-367-1449Office: 705-721-1090Web: www.valmontstructures.ca

Structural List # 9.75.20Sign Supports Page 2 of 2Column, Breakaway, Steel Date: 01-Feb-2018

SPECIFICATIONS: OPSS.PROV 915DRAWINGS: SS118-30 (Update)CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 399: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

CompanyFabricator:Advance Welding & Mfg. (1992) Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-3030Fax: 905-560-7070Email: [email protected]: www.advance-welding.comOntario Source:Wercholoz Canada Inc.95 Cascade St, Unit 2Hamilton ON L8E 3B7CanadaTel: 905-560-5064Fax: 905-560-7070Email: [email protected]: www.wercholoz.com

AMG Metals Inc.34 Holtby AveBrampton ON L6X 2M1CanadaTel: 905-453-6113Fax: 905-453-6111Email: [email protected]: www.amgmetals.com

L&A Metal Works Inc.1968 Lincoln Rd, PO Box 371, Sta "A"Fredericton NB E3B 4Z9Tel: 506-458-1100Fax: 506-450-4879Email: [email protected]: www.lametalworks.ca

Spina's Steel Workers Co. Ltd.229 Wilkinson Rd.Brampton ON L6T 4M2CanadaTel: 905-453-2111Fax: 905-453-8334Email: [email protected]: www.spinasteel.com

Structural List # 9.75.55Sign Supports Page 1 of 1Overhead, Monotube, Steel Date: 04-Apr-2017

SPECIFICATIONS: NSSPDRAWINGS: SS118-40 (Update), SS118-41 (Update), SS118-42

(Update)CUSTODIAL OFFICE : Bridge Office - (905) 704-2351

Page 400: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 401: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product IdentityCrafco Inc.420 N. Roosevelt Ave.Chandler AZ 85226 2601USATel: 602-276-0406Fax: 480-961-0513Toll Free: 800-528-8242Email: [email protected]: www.crafco.com

Ontario Source:Crafco, Inc. (ON)66 Akron RdToronto (Etobicoke) ON M8W 1T2CanadaTel: 800-528-8242Email: [email protected]: www.crafco.com

Ultraseal 3750

McAsphalt Industries Ltd.8800 Sheppard Avenue EastToronto ON M1B 5R4Tel: 416-281-8181Fax: 416-281-8842Toll Free: 800-268-4238Email: [email protected]: www.mcasphalt.com

MACSEAL BDM (previously Bemalastic 1213 BDM)

Structural List # 9.90.15Waterproofing for Bridge Deck Page 1 of 1Asphalt, Rubberized, Hot Applied (Poured) Date: 01-Dec-2015

SPECIFICATIONS: OPSS.PROV 914, OPSS 1213DRAWINGS: OPSD 3370.1000*, OPSD 3370.1010*CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705

Page 402: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions
Page 403: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions

Company Product IdentityW. R. Meadows of Canada70 Hannant CourtMilton ON L9T 5C1CanadaTel: 905-878-4122Fax: 905-878-4125Toll Free: 800-563-3618Email: [email protected]: www.wrmeadows.com

Vibraflex MTO

Structural List # 9.90.60Waterproofing for Bridge Deck Page 1 of 1Protection Board Date: 01-Apr-2011

SPECIFICATIONS: OPSS 914, OPSS 1215DRAWINGS: OPSD 3370.1000, OPSD 3370.1010CUSTODIAL OFFICE : MERO - Concrete - (416) 235-3705 Bidders Tendering Queries call (905) 704-2203

Page 404: DESIGNATED SOURCES FOR MATERIALS (DSM) · Page 1 of 1 RECORD OF REVISIONS . DESIGNATED SOURCES FOR MATERIALS (DSM) MANUAL . This manual includes revisions as shown below. Revisions