DESIGN PROJECT

BRACELET“SPARKLING DOTS”

2 /5CREATE-YOUR-STYLE.COM

Step 1

16 cm x11.5 cm x2

Swarovski crystals Supplies & Tools

SuppliesChain, silver, 19 cm17x Head pins, silver1x Jump ring, silver, 4 mm3x Jump rings, silver, 6 mm1x Lobster clasp, silver

ToolsFlat nose pliersRound nose pliersRulerSide cutter

Level of design: BEGINNERHave also a look at the text instructions at the last page!

Article Product Group Article No. Amount Size Color Color Code

Beads 5052 8 pcs. 6 mm Crystal Rose Gold 001 ROGL

Beads 5052 9 pcs. 6 mm Crystal Silver Shade 001 SSHA

STEP 1

DESIGN PROJECT BRACELET “SPARKLING DOTS”

Wiring

3 /5CREATE-YOUR-STYLE.COM

Step 2

Repeat step x16

Step 3STEP 3

STEP 2

4 /5CREATE-YOUR-STYLE.COM

STEP 4

5 /5CREATE-YOUR-STYLE.COM

DESIGN PROJECT BRACELET “SPARKLING DOTS”

STEP 1: Cut two 1.5 cm long chains and one 16 cm long chain. STEP 2: Attach the 1.5 cm long chains to one of the ends of the 16 cm long chain using 6 mm jump rings. On the other end attach a

lobster clasp using a 4 mm jump ring.

STEP 3: Insert Swarovski Bead art. 5052 6 mm Crystal Rose Gold onto the headpin and turn a loop close to the bead as shown. Repeat this step 16 more times with the other beads.

STEP 4: Attach the headpins created in step 3 to the chain and to extension with 6mm jump ring as shown in the illustrations.