XB-75 PVC WATERSTOP

2/4

PRODUCT DIMENSIONS

NOTE: XB-75 PVC Wate rs top i s ava i l ab le i n 10 met re ro l l l eng ths

TYPICAL APPLICATIONS

DESIGN PARAMETERS

1. XB-75 PVC Waterstop should only be instal led into an expansion/isolat ion joint with a width of 15-25mm.

2. E a c h l e g l e n g t h s e c t i o n o f t h e X B - 7 5 P V C Wa t e r s t o p t h a t i s t o b e e m b e d d e d i n t o t h e c o n c r e t e , m u s t pene t r a t e b y a m in imum o f 25mm i n t o each s i de o f t he j o i n t . Th i s means t ha t t he r e i n f o r cemen t co ve r mus t be a t a m in imum o f 30mm to a l l ow fo r the wa te rs top l eg to f i t i n to the concre te .

No te : A l so re fe r to ou r I ns ta l l a t i on Paramete rs on Page 2 .

P r oposa l , spec i f i c a t i on , des i gn and end use o f t h i s p roduc t mus t be f u l l y endo r sed and app roved b y the Eng ineer.

WRITTEN SPECIFICATIONS

Waters top sha l l be XB-75 PVC Waters top as supp l ied by CORKJOINT wi th d imens ions , shape and mater ia l p roper t ies as i l l us t ra ted/ment ioned in the i r b rochure . A l l i ns ta l l a t i on and jo in ing p rocedures must be accord ing to the i r recommenda t ions .

Expansion JointFillerboard

Building

DOUBLE BEAM/SLAB PODIUM SLAB/BEAM TO BU ILD ING

1st Pour 2nd Pour

XB-75 PVC Waterstop

ExpansionJointFillerboard

Concrete Beam Concrete Beam

Concrete Slab Concrete SlabJoint Sealants

1st Pour

XB-75 PVC Waterstop

Concrete Beam

Concrete Slab Joint Sealants

25.00

75.00

20.00

FIXING FLANGE

FIXING FLANGE

5.00

5.00

20.00

TEAR WEB

4/4

The information and the recommendations relating to the application and end use of this product are given in good faith and are based on the information provided by the manufacturer of the product and / or the Company’s current knowledge and experience in connection with the product when properly stored, handled and applied under normal conditions and no liability of final function at the job site is assumed. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability of or fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written and / or oral recommendations, or from any other advice offered by the Company. No responsibility or liability by the Company will be accepted for misuse, misreading or derivation from the recommended guidelines in respect of this product and the user shall determine the suitability of the product for his intended use and assume all risks and liability in connection therewith. The information contained in this brochure may change at any time without notice.

Effective Date: 01 January 2014

CORKJOINT (MALAYSIA) SDN BHD 383102-H CORKJOINT (SINGAPORE) PTE LTD 200716724-KNo.51, Ja lan BRP 8/2 , Bukit Rahman Putra Industr ia l Park 10, Admira l ty Street , #03-82 North L ink Bui ld ing47000, Sunga i Buloh, Se langor Darul Ehsan, Malays ia S ingapore 757695Tel +603 6148 8010 Tel +65 6455 9331Fax +603 6148 8020 Fax +65 6455 8535

info@corkjoint .comwww.corkjo int .com

SITE JOINING

CORKJOINT recommends the use of i ts special ized welding equipment for on-site welding which consists of thermostatical ly-control led welding blades and special welding j igs (each type of CORKJOINT Sure-Stop PVC Waterstop requires i ts own welding j ig to suit the part icular shape). On-site joining is a simple exercise using CORKJOINT Heat Welding Equipment comprising of an adjustable welding j ig and heating blade. The ends of the waterstop are cut square and placed into the adjustable j ig. The ends of the waterstop then sl ide up against the heating blade and bring the two ends together unti l the molten ends of the PVC fuse. When ordering welding equipment, please advise prof i le number of waterstop required.

HEALTH AND SAFETY INFORMATION

Jo in ing o f XB-75 PVC Waters top i s per fo rmed by hea t we ld ing wh ich resu l t s in the d ischarge o f hydrogen ch lo ride mist and vapour. In confined spaces or in sti l l air condit ions, the use of a venti lat ion fan or a suitable respirator should be adopted. For further information or advice on health and safety precautions, safe handling, storage and correct disposal of products, please refer to the most recent product Material Safety Data Sheet (MSDS), which is available upon request.

© Corkjoint 2012. All Rights Reserved.