Design of Gabion Structures - Gabion Box, Gabion Mattress

E-mail

Home About Us Products Technology Application Installation Contact Us

Gabions Baskets

Gabion

Gabion box

Gabion Sack

Gabion Mesh

Galvanized Gabion Box

Rock Mattress

Rockfall Netting

Reno Mattress

Terramesh System

Gabion Mattress

Green Terramesh System

High Strength Gabions

Poultry Mesh

Road Mesh

Design of Gabion Structures - Gabion Box, Gabion Mattress

Initial data for the design

1. Input data for the design of gabion structures shall contain the information needed to:

- Analysis of the slope of the natural and artificial slopes, embankments, direction of channel processes;

- The possibility of determining the forces acting on the structure;

- Develop constructive solutions to the projected facilities;

- Calculations of the basic parameters of structures;

- Development of technologies of construction and further exploitation.

2. Design of gabion structures is based on the results of previously conducted geotechnical and hydrological

investigations.

3. Depending on the complexity of the natural environment for the design of gabion structures, the following

materials:

- Climatic characteristics of the area;

- Geomorphology and topography;

- Hydrological conditions;

- Soil and drainage studies;

- On local and imported from other regions of the building materials.

Basic requirements of the design of gabion structures

1. Basic requirements for the design of gabion structures for various purposes, and their individual structures and

foundations, as well as the main calculation of the load and must be taken in accordance with statutory

requirements presented in this standard, In the design and construction should take into account the peculiarity of

gabion structures - permeable honeycomb type structure with a flexible three-dimensional mesh cage.

2. The location, layout and type of gabion structures should be chosen according to their functional purpose, the

natural conditions of the area of construction works and the requirements of this standard.

3. The design on the water bodies, and variable levels of underwater parts of the gabion structures shall not occur

following negative processes:

- For water bodies (lakes, ponds, flooded quarries, reservoirs) - erosion of the bottom of the base structure by the

action of the reflected waves;

- For waterways (rivers, streams, canals) - reconfiguration of the channel due to a change of direction of flow of

water.

4.Gabion structures used in the construction of river and marine hydraulic structures, used in any climatic

conditions at the design average flow velocity of water up to 5.5 m / s and wave loads, determined by calculation.

5. When calculating the stability of natural slopes should be evaluated as the overall stability of the slope, and the

local stability of the individual parts of the slope.

6. In the calculations, gabion structures shall be taken into account the following features:

- Porosity of gabions for manual installation of stone material 0.25-0.35;

- The volume of filling the upper gabion stone material should be increased to 5% above the estimated volume,

taking into account the possibility of partial self-packing material filling during construction under the influence of

vertical loads.

7. The average size of the stone material and height of the gabions to protect slopes from erosion of the coast, in

the absence of wind waves is taken depending on the speed of water flow in accordance with the requirements ,

shown in the following Table.

type of gabion Gabion height (m) The average stone size Limiting the flow rate (m/s)

Home > Technology > Design of Gabion Structures - Gabion Box, Gabion Mattress

Design of Gabion Structures - Gabion Box, Gabion Mattress http://www.gabionboxsupplier.com/technology/design-of-gabion-struc...

1 of 4 21/04/2015 16:06

(mm)

mattress 0.15-0.17 85 3.5

110 4.2

0.23-0.25 85 3.6

120 4.5

0.30 100 4.2

125 5.0

Gabion box 0.5-1.0 150 5.8

190 6.4

8. In terms of wave loads the average size (weight) of rock material and height of the gabion determined by

calculation. At the stage of study on the average size (weight) of rock material is determined by the maximum

wave height, laying the slope and shall meet the requirements shown in following Table.

Height of mattress-

gabion (m)

The average stone

size (mm)

Laying the slope of the foundation

1:1.5 1:2.0 1:3.0

The maximum wave height (m)

0.15-0.17 85 0.4 0.75 1.2

0.23-0.25 120 0.6 0.9 1.4

0.3 150 0.7 1.2 1.8

0.5 250 0.9 1.4 2.0

9. The height of gabion structures exceed 0.5-1.0 m estimated water level of the water body in the flood period,

taking into account wind and ship waves.

10. The size of the cell gabion mesh products selected in accordance with the average size of the stone.

11. Diameter of wire mesh is chosen based on calculations of stress perceived by the facility.

12. At the construction site of gabion structures, gabion structures between a connecting galvanized wire knitting,

wire with a flow rate for binding gabion 5% of the total weight of wire containers.

13. The design of gabion structures is allowed to change the shape and dimensions of gabion mesh products, they

must also be provided with the strength and stiffness of joints for.

14. The design of gabion structures with geotextiles, in the calculation of the coefficient of friction decreases in the

contact zone of the wall with a ground base and backfill of 5-10%.

15. To gabion structures used in the design of structures of high degree of responsibility, it is necessary to use solid

stone materials of igneous rocks (basalt, granite, diabase, diorite), as well as metamorphic rocks, the

characteristics of strength and frost resistance is not lower than in igneous rocks.

16. To ensure the protection of the above-water zone of bioengineering gabion structures with stepped front face,

allowed a partial filling of the upper part of the carrier is not box-box-like gabions or gabions with reinforcing panels

20cm layer of topsoil, Figure 1. Gabion structures, made with the use of mattress products recommended to close

the 20cm layer of topsoil, Figure 2.

1 vegetable soil; 2 geotextile; 3 stone material

Figure 1 - Example of gabion box-like structures

topsoil

1 vegetable soil; 2 gabion mattress design

Figure 2 - Example of closing the mattress, gabion

structures topsoil

According to the location in space gabion walls are divided into vertical and inclined, in the form of the front facesare divided into smooth and graded.Thin gabion walls of various forms of the front face, it is recommended to design, applying the box-shapedgabion mesh products with a reinforcing plate. Renounce the use of reinforcing bar must be justified project.The height of the walls to ensure the stability of the upper part of the protected slope or slope. The width and shape


2 of 4 21/04/2015 16:06

of gabion walls set a condition for external and internal stability of the walls.

1 - Backfill 2 - gabion box-shaped, 3 - ground facilities

Figure 3 - Example of the construction of massive

bulk wall with stepped front edge on a horizontal basis

with backfilling

1 - Backfill 2 - gabion box-shaped, 3 - ground

facilities

Figure 4 - Example of the construction of massive

bulk wall with stepped front edge on the inclined base

with backfilling

The type, shape, design dimensions, including materials gabion walls should be chosen in the design process,taking into account local conditions, the planned loads and possible deformations of the walls.

1 - Backfill 2 - gabion box-shaped, 3 - ground facilities

Figure 5 - Example of design walls with stepped front

edge on a horizontal basis with backfilling

1 - box-shaped gabion 2 - ground facilities

Figure 6 - Example of design walls with stepped front

edge on the inclined base with backfilling

1 - stage front face of building, 2 - gabion box-shaped

with a reinforcing plate 3 - Backfill, 4 - ground facilities

Figure 7 - Example of thin-wall construction with

stepped front edge of the horizontal base with

reinforced backfilling

1 - smooth front face of building, 2 - gabion box-shaped

with a reinforcing plate 3 - Backfill, 4 - ground facilities

Figure 8 - Example of thin-wall construction with a

smooth front face of the horizontal base with reinforced

backfilling

If you need to consult the price, please contact the business department by e-mail:


3 of 4 21/04/2015 16:06

Your Name *

Your E-mail *

Message *

Verification Code

When you contact us, please provide your detail requirements.

That will help us give you a valid quotation.

Add: 56 Chengye street, Hebei, China. 053600 Tel: +86-318-58521607 Fax: +86-318-58521607Website: http://www.gabionboxsupplier.com E-mail: [email protected] Anping Fabnoh Gabion Box Factory


4 of 4 21/04/2015 16:06

Documents

Design of Gabion Structures - Gabion Box, Gabion Mattress