Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
This drawing is for reference only
Fenetex logos may be not removed.
www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
Design Guide Summary and System Limits DG7.2
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
5.5 HOOD extruded
Clear Opening is Overall Height -7.75”
Somfy RTS, w/special order Somfy CMO
Operator: Manual Crank, Somfy 4 wire,
Standard Colors: White, Beige, Bronze, Black
6.5 SINGLE HOOD/BRACKET roll form
Clear Opening is Overall Height -8.75”
Standard Colors: White, Beige, Bronze
Operator: Manual Crank, Somfy 4 wire,
Somfy RTS, w/special order Somfy CMO
Note 1: Bracket with painted end plate is used for applications with hoods only.
Note 2: For cavity mount installations only the bracket is used.
Note 3: If a screen is to be taller than above listed heights a custom cover or soffit housing will need to be supplied or fabricated by others as
is typical for a built-in installation. Bracket may also need to be built out to accommodate increased roll diameter.
6.5 DUAL HOOD/BRACKET roll form
Clear Opening is Overall Height -14.25”
Standard Colors: White, Beige, Bronze
Operator: Manual Crank, Somfy 4 wire,
Note 2: For cavity mount installations only the bracket is used.
or fabricated by others as is typical for a built-in installation. Bracket may also need to be built out to
Note 1: Bracket with painted end plate is used for applications with hoods only.
Somfy RTS, w/special order Somfy CMO
Note 3: If a screen is to be taller than above listed heights a custom cover or soffit housing will need to be supplied
accommodate increased roll diameters.
Track Type 1
Adj. Jamb Track
WH,BG,MB
Track Type 2
Adj. Face Track
WH,BG,MB
Track Type 3
DUAL Adj. Jamb Track
WH,BG,MB
Track Type 4
DUAL Adj. Face Track
WH,BG,MB
Track Type 5
Hurricane Track
WH,MB
Track Type 6
DUAL Hurricane
+ Adj. Face Track
WH,MB
Fabric Insect Shade Hurricane Vinyl Window
Max Width 216” 200” 192” 170”
Max Height 150” 150” 114” 150”
Fabric Insect Shade Hurricane Vinyl Window
Max Width 216” 200” 192” 170”
Max Height 180” 180” 150” 180”
Fabric Insect Shade Hurricane Vinyl Window
Max Width 216” 200” 192” 170”
Max Height 180” 180” 150” 180”
Max System Dimensions
Note: Screens outside max system dimensions require a waiver.
Max System Dimensions
Max System Dimensions
Note: Screens outside max system dimensions require a waiver.
Note: Screens outside max system dimensions require a waiver.
WH=White ,BG= Beige, MB=Bronze
www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
Use for Insect/Shade/Clear Weather Curtains
Adjustable Tracks
Track Details Drawing 1-DG7.2
Track Type 1: Adj. Jamb Track Track Type 2: Adj. Face Track
1.25"
2.5
0"
Track Type 1: Adj. Jamb Track
Shown as Inside/Jamb Mount
Top View
2.94”
Track Type 2: Adj. Face Track
Shown as Outside/Face Mount
Top View
1.3
6”
1
1
2
U.S. PATENT 9,458,666 and others pending.
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
1.4
3”
4) 3/16” Rivet
Notes:1) 1/4”Tapcon or #10 s/s Hex Head Length for 2" Embedment to Substrate.24" Spacing Standard. Installer may increase anchors if location is subject to high winds.
2) Fastener Cover
3) C-channel is 1.5”x1.5”x.125” use if needed to resolve out of plumb surfaces on jamb mount installations.
Track Type 1: Adj. Jamb Track
Shown w/C channel as Inside/Jamb Mount
Top View
4
3
1
This drawing is for reference only
Fenetex logos may be not removed.
www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
Track Type 3: DUAL Adj. Jamb Track
Shown as Inside/Jamb Mount
Top View
Track Type 4: DUAL Adj. Face Track
Shown as Outside/Face Mount
Top View
2.5
0"
2.50"
2.94”
2.6
0”
Track Details Drawing 2-DG7.2
DUAL Screen Adjustable Tracks
Use for Insect/Shade/Clear Weather Curtains
Track Type 3: DUAL Adj. Jamb Track Track Type 4: DUAL Adj. Face Track
1
1
2
U.S. PATENT 9,458,666 and others pending.
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
Notes:1) 1/4”Tapcon or #10 s/s Hex Head Length for 1.5" Embedment to Substrate.24" Spacing Standard Installer may increase anchors if location is subject to high winds.
2) Fastener Cover
2.6
7”
This drawing is for reference only
Fenetex logos may be not removed.
www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
Track Type 5: Hurricane Track
Shown as Outside/Face Mount
Top View
1
5
Track Type 5: Hurricane Track
Shown as Inside/Jamb Mount w/Build-out
Top View
5
4
3
2
1
5/8
” Acce
ss Hole
2.9
4"
1.25"
#’s 3/3.5 Build-outs can be angle or tube, seenotes below.
Use for Hurricane Screens
Hurricane Track
Track Type 5: Hurricane Track
Track Details Drawing 3-DG7.2
3.5
U.S. PATENT 9,458,666 and others pending.
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
1.3
1”
Notes:1) 5/16” Tapcon XL
2) 1/4x1" s/s Self Drilling
3) 2"x3"x.25" AL Tube3.5) 2”x2” or 2”x3”x.25” AL Angle Alternate build-out options are available. See Florida Product Approval or Miami-Dade NOA for full details.See: FL 8637See: NOA 13-1007.08
4) 5/8” Plastic Hole Cap
5) Fastener Cover
1.2
5”
2.94”
This drawing is for reference only
Fenetex logos may be not removed.
Track Type 6: DUAL Hurricane + Adj. Face Track
Shown as Inside/Jamb Mount w/ Build-out
Top View
Track Type 6: DUAL Hurricane + Adj. Face Track
Shown as Outside/Face Mount
Top View www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
DUAL Hurricane Track + Adj. Face Track
Track Details Drawing 4-DG7.2
Use for Hurricane Screens + Insect/Shade/Clear Weather Curtain
Track Type 6: DUAL Hurricane + Adj. Face Track4
3
1
5/8
” Acce
ss Hole
25
3.5
#’s 3/3.5 Build-outs can be angle or tube, seenotes below.
1
5
U.S. PATENT 9,458,666 and others pending.
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
2.48”
2.9
4”
2.5
5”
2.94”
2.4
8”
Notes:1) 5/16” Tapcon XL
2) 1/4x1" s/s Self Drilling
3) 2"x3"x.25" AL Tube3.5) 2”x2” or 2”x3”x.25” AL Angle Alternate build-out options are available. See Florida Product Approval or Miami-Dade NOA for full details.See: FL 8637See: NOA 13-1007.08
4) 5/8” Plastic Hole Cap
5) Fastener CoverThis drawing is for reference only
Fenetex logos may be not removed.
www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
5.5 Hood Drawing 5-DG7.2
About Extruded Hoods
Use for Single Screens with Extruded Hoods
1) Aluminum end plate.
10) #6x.5 s/s phil flat screw.
7) Flange for 3/16” hood locking rivet.
Screen Track Details:
Hood and End Cap Details:
2) Extruded hood top and back.
4) Fasteners for mounting hood to
3) Extruded front cover.
5) Indicator line for mounting fasteners.
8) Type 1 track (shown).
9) Screen pre-feeder.
building. Min (2) 1/4” Tapcons, or lags for 2" embedment to substrate at hood ends and single fastener on 24” O.C. between ends. Hood may be fastened at top or back using the indicator lines as a guide.
6) Brush channel.
5
4
3
2
1
6
7
9
8
U.S. PATENT 9,458,666 and others pending.
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
6
10
Design and Installation Note: Fenetex extruded hoods are designed to mount independently from the tracks. Tracks are cut to length from floor to underside of hood. Refer to the CLEAR OPENING dimension on Bracket Detail Page for considerations where screen elements are meant to be hidden, or out of the view plane when using a hood.
This drawing is for reference only
Fenetex logos may be not removed.
5.75” 1.43” 1.31”
2.9
4”
2.9
4”
2.5
0”
5.75”
5.5
”
7.5
0”
www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
U.S. PATENT 9,458,666 and others pending.
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
Use for Single Screens with Extruded Hoods
5.5 Hood End Plate/Track Detail 6-DG7.2
About Extruded Hoods
w/Type 1 Track w/ Type 5 Trackw/Type 2 Track
1.25”
Clear Opening is Overall Height -7.75”
Note 1: You may order an extruded hood to use with built in installations if size allows. Typically this is only used if the soffit area is very rough or space is very tight and the goal is to prevent the screen from chaffing in the soffit.
Max Screen Heights:Insect/Shade/Clear Weather Combinations Using Type 1 or 2 Tracks 150”
Type 5 Hurricane Track. 114”
This drawing is for reference only
Fenetex logos may be not removed.
www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
6.5 Square Bracket Drawing 7-DG7.2
About 6.5 Square Brackets
Use for Single Screens With or Without Roll Form Hoods
4) Fasteners for mounting bracket to
2) Is a painted laser cut
that is attached to (1) with
9) Cut-away tab for manual crank.
not typically used on trapped
1) Is a laser cut aluminum plate with formed flanges.
Bracket Details:
on outside mount, covers are
openings or cavity mount
5) Track should be cut and installed flush to the bottom of the bracket.
aluminum plate bracket cover
a standard pattern for motor mounts and idler bearings.
building. Min (4) 1/4” Tapcon, or Lag for 2" Embedment to Substrate. Bracket should be secured by (2) fasteners in the top Flange and (2) fasteners in the back flange.
Screen Track Details:
3/16” rivets. Painted covers
3) #10-24 s/s PEM studs in
6) Screen track assembly.
are typically used with hoods
7) Screen pre-feeder.
installations.
8) #6x.5” s/s phil flat screw.
U.S. PATENT 9,458,666 and others pending.
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
1
2
3
4
4
5
6
78
9
Design and Installation Note: Fenetex hoods are designed to mount independently from the tracks. Tracks are cut to length from floor to underside of hood. Refer to the CLEAR OPENING dimension on Bracket Detail Page for considerations where screen elements are meant to be hidden, or out of the view plane when using a hood.
This drawing is for reference only
Fenetex logos may be not removed.
www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
U.S. PATENT 9,458,666 and others pending.
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
6.5 Square Bracket/Track Detail 8-DG7.2
About 6.5 Square Brackets
Use for Single Screens With or Without Roll Form Hoods
1.43” 1.31”
2.9
4”
2.9
4”
w/Type 1 Track w/ Type 5 Trackw/Type 2 Track
6.50”
1.25”2.5
0”
6.50”
6.5
0”
8.5
0”
2.9
4”
Max Screen Heights:
Type 5 Hurricane Track 150”
Insect/Shade/Clear Weather Combinations Using Type 1 or 2 Tracks 180”
Clear Opening is Overall Height -8.75”
Note 1: Bracket with painted end plate is used for applications with hoods only. Note 2: For cavity mount installations only the bracket is used.
Note 3: If a screen is to be taller than above listed heights a custom cover or soffit housing will need to be supplied or fabricated by others as is typical for a built-in installation. Bracket may also need to be built out to accommodate increased roll diameter.
This drawing is for reference only
Fenetex logos may be not removed.
Bracket Details:
9) Track Cover
7) Screen pre-feeder.
2) Is a painted laser cut aluminum plate bracket cover that is attached to (1) with 3/16” rivets. Painted covers are typically used with hoods on outside mount, covers are not typically used on trapped openings or cavity mount installations.
building. Min (6) 1/4” Tapcon, or Lag for 2" Embedment to Substrate. Bracket should be secured by (2) fasteners in the top Flange and (2) fasteners in each back flange.
5) Track should be cut and installed to the bottom of the bracket.
Screen Track Details:
1) Is a laser cut aluminum plate with formed flanges.
6) Type 2 track (shown).
4) Fasteners for mounting bracket to
3) #10-24 s/s PEM studs in a standard pattern for motor mounts and idler bearings.
8) Type 5 track (shown).
1
2
3
4
5
6
7
8
9
10
www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
6.5 DUAL Brackets Drawing 9-DG7.2
Use for DUAL Screens With or Without Roll Form Hoods
About 6.5 DUAL Brackets
U.S. PATENT 9,458,666 and others pending.
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
Fenetex hoods are designed to mount independently from the tracks. Tracks are cut to length from floor to underside of hood. Refer to the CLEAR OPENING dimension on Bracket Detail Page for considerations where screen elements are meant to be hidden, or out of the view plane when using a hood.
Design and Installation Note:
Shown is a Track Type 6: DUAL Hurricane + Adj. Face Track
Alternate Configurations are Type 3 and Type 4 (see page 2)
This drawing is for reference only
Fenetex logos may be not removed.
www.fenetex.comCopyright 2017 FENETEX, Inc.
®
R E T R A C T A B L E S C R E E N S
6.5 DUAL Bracket/Track Detail 10-DG7.2
6.5 DUAL Brackets
Use for DUAL Screens With or Without Roll Form Hoods
U.S. PATENT 9,458,666 and others pending.
Fenetex is a registered trademark of Fenetex, Inc. All rights reserved.
6.50”
2.9
4”
2.48”
6.50”
12.0
0”
14.0
0”
Shown is a Track Type 6: DUAL Hurricane + Adj. Face Track
Alternate Configurations are Type 3 and Type 4 (see page 2)
Insect/Shade/Clear Weather Combinations using Type 1 or 2 Tracks 180”
Clear Opening is Overall Height -14.25”
Note 1: Bracket with painted end plate is used for applications with hoods only.
Note 2:For cavity mount installations only the bracket is used. Note 3: If a screen is to be taller than above listed heights a custom cover or soffit housing will need to be supplied or fabricated by others as is typical for a built-in installation. Bracket may also need to be built out to accommodate increased roll diameter.
Type 5 Hurricane Track + Type 1 or 2 Track 150”
Max Screen Heights:
This drawing is for reference only
Fenetex logos may be not removed.