7/27/2019 Design Fee Schedule
2/3
typically comprises more than 20% change in the design. There
will never beadditional charges or work without your written
approval of this work. There are nocharges for minor revisions as
long as they occur before the creation ofthe Construction
Drawings.
PAYMENT TERMS:Unlike many designers, we believe that we should
not receive the total amount ofthe design fees until the client has
seen significant progress. Accordingly, we askfifty percent (50%)
of the quoted fees in advance, with the final payment of
fiftypercent due upon receipt of the approved floor plan layout.
After receipt of the 2nd
half payment, we will proceed to complete and deliver the facade
elevation design.
ARCHITECTURAL CONSTRUCTION DRAWINGS SET: These are
theconstruction drawings needed when applying for a building
permit.
Fees for Standard Service production of
ArchitecturalConstruction Drawings:$ 2.00 per square foot of
covered area.Estimated time to completion is 6 weeks.
Fees for Express Service production of ArchitecturalConstruction
Drawings: $ 3.00 per square foot of covered area.Estimated time to
completion is 2 weeks.
OPTIONAL SERVICES:
For REMAINING 3 ELEVATIONS (3 NEW DRAWINGS--Rear, Left, andRight
Sides) PLUS ROOF PLAN DESIGN:The remaining 3 Elevations and the
Roof Design are included in theproduction of the Construction
Drawings Set. However, in instances wherewe will not be the design
service preparing the Construction Drawings Set,we can create the
remaining 3 Elevations and Roof Design in order tocomplete the
Design Development. The cost for this service is $0.50 persquare
foot 'under roof'.ForSLOPING LOTS or IRREGULAR LOTS: Cost is $0.55
per square foot'under roof' when ordering side and rear elevations
package.
COMPUTER-GENERATED 3DPERSPECTIVE RENDERINGS
(OPTIONAL)--photo-realistic images:From 2D Cad files: starts at
$600From Hand-rendered drawings: starts at $1200(plus you get the
2D files as well) sample of 3D perspective model
EXTERIOR ANIMATIONS or INTERIOR WALK-THROUGHS (OPTIONAL):From 2D
Cad files: starts at $1800
Special orders such as computer generated perspectives,
fly-overs and walk-throughs require payment in advance. We
subcontract this work to Third parties.
FOR CRITIQUE OF EXISTING PLANS, please call for
consultation.
For information on ourSCOPE OF SERVICES and to know what is
included ineach package, click here. To learn the Steps To A
Custom-Designed NewHome, click here.
Important Note: If such services are necessary, there is a fee
for StructuralEngineering computations and the signing of the plans
by a Structural Engineerlicensed in your State. This may be
required due to sloping terrain, soil conditions,seismic
environment, snow, rain or wind loading environment or by the use
of non-standard structural design, e.g. cantilever, pre and
post-tensioned structuralelements for long unsupported spans. There
may also be other conditions thatmake it advisable or mandatory to
use a structural engineer for the structuraldesign. These fees are
typically $1.00 to $3.00 per square foot of covered area.
converted by Web2PDFConvert.com
http://www.web2pdfconvert.com/?ref=PDFhttp://www.web2pdfconvert.com/?ref=PDFhttp://www.asis-leif.com/steps_to_a_custom_home.htmhttp://www.asis-leif.com/custom%20services.htm
