Upload
lykhuong
View
221
Download
2
Embed Size (px)
Citation preview
Design and Function of Packaging Lines
Addressing the Risk of Cross Contamination
L. A. Goff, Director of Quality Assurance
Pharma Packaging and Labeling Conference Feb. 2017
Addressing Cross-Contamination in
Packaging
Agenda
1. Pre-existing cross contamination risks
2. Cross-contamination risks during
renovations
3. Final design to address cross-
contamination risks
2
Pre-existing Challenges: • Bulk/component
staging area • Common hallways • Product exposure • Fit & Finish • Lack of full
segregation btw/Pack Lines
• Shared wash/clean rooms • Material flow (dirty/clean) • Wood pallets
Renovation Nation: Design Objectives & No Drug
Shortages
• Meet or exceed ISPE guidelines for Fit & Finish
• Deliver fully segregated packaging lines • Identify and Mitigate risks from cross
contamination • Deliver solution to address future
Serialization and Aggregation requirements • DO NOT ADVERSLY IMPACT ON-GOING
PACKAGING AND MANUFACTURING OPERATIONS
5
6
The Challenge – renovate while continuing to pack, analogous to living in your house while completely renovating the kitchen
Mitigating Cross-contamination Risks during
Construction
• Containment Plans
o Hard containment walls vs. plastic
o Negative pressure to keep particulate matter inside construction area – directly exhausted to outside
o Magnehelic gauge to confirm airflow
o Monitored by QA daily for compliance to plan
o Air-monitoring for VP and NVP
• Gowning requirements for construction zones
8
Major demolition
Containment plans designed to mitigate risks associated with construction activities.
10
International Society of Pharmaceutical Engineers (ISPE) Area Designations
Design & Functionality of Packaging Lines
• Fully segregated packaging lines • Fill Rooms and Secondary Pack separated by PALs and
MALs • Use of “Bubble” Airlocks • Fill rooms w/dedicated HVAC systems single pass
w/appropriate ACH • Product exposure – only in Fill Room • Gowning changes when transitioning from Grey to White
zones • Gowning changes when transitioning to new Product Family • Smooth walls, ceilings and solid color floor for ease of
cleaning • Local extract at Case Packer to mitigate corrugate dust • Filler upgrades for the detection of foreign tablets • Elimination of wood pallets in GMP space • Submitted for ISP Facility of the Year Award
11
Blister suite prior to packaging line installation
Kanban
• Improved capabilities to confirm tablet quality
• Fill room (Primary Pack) enhancements mitigates risk of cross-contamination
Finished goods leaving line in cases
Central Palletizer
PA-5: new Formulation Suite
Questions???