Upload
zebrosprojects
View
217
Download
1
Embed Size (px)
DESCRIPTION
DESIGN AND DEVELOPMENT OF PIC MICROCONTROLLER BASED VEHICLE MONITORING SYSTEM USING CONTROLLER AREA NETWORK (CAN) PROTOCOL ABSTRACT We proposed system is aimed at the implementation of CAN protocol using PIC for vehicle monitoring system. The main feature of the system includes monitoring of various vehicle parameters such as Temperature, presence of CO level in the exhaust, Battery Voltage and Light due to spark or fire.
Citation preview
ZEBROS PROJECTS
Office Address: No 4 / Flat No 3D, Sai Kiran Apts, First Main Road, Kasturba Nagar, Chennai-20 web: www.zebros.in e mail : [email protected] mob: 99400 98300,9500075001
WAY TO YOUR GOAL
EMBEDDED SYSTEM PROJECTS
FINAL YEAR PROJECTS
IEEE PROJECTS 2013-2014
CONTACT: 9940098300, 9500075001
E-Mail:[email protected]
ZEBROS PROJECTS
Office Address: No 4 / Flat No 3D, Sai Kiran Apts, First Main Road, Kasturba Nagar, Chennai-20 web: www.zebros.in e mail : [email protected] mob: 99400 98300,9500075001
DESIGN AND DEVELOPMENT OF PIC
MICROCONTROLLER BASED VEHICLE MONITORING
SYSTEM USING CONTROLLER AREA NETWORK (CAN)
PROTOCOL
ABSTRACT
We proposed system is aimed at the implementation of CAN protocol using PIC
for vehicle monitoring system. The main feature of the system includes monitoring of
various vehicle parameters such as Temperature, presence of CO level in the exhaust,
Battery Voltage and Light due to spark or fire.
EXISTING SYSTEM
The Existing wired system has a slow speed and high noise. So we need high speed and
existing accurate measurement system. In our proposed system is high speed, accurate
measurement and low noise. We are using CAN bus is up to 1Mbps speed and very low
loss. This system is fully wired system.
PROPOSED SYSTEM
The CAN protocol is based on a bus topology, and only two wires are needed
for communication over a CAN bus. The bus has a multi master structure where each
device on the bus can send or receive data. Only one device can send data at any time
while all the others listen. If two or more devices attempt to send data at the same time,
the one with the highest priority is allowed to send its data while the others return to
receive mode.
BLOCK DIAGRAM
CONTACT: ZEBROS PROJECTS
PHONE: 9940098300, 9500075001
ZEBROS PROJECTS
Office Address: No 4 / Flat No 3D, Sai Kiran Apts, First Main Road, Kasturba Nagar, Chennai-20 web: www.zebros.in e mail : [email protected] mob: 99400 98300,9500075001
DESCRIPTION
The monitoring parameters are temperature, battery voltage, light due to spark
or fire and CO level in the exhaust. For monitoring the above parameters, LM35 sensor,
9V battery, LDR and MQ6 sensors are used
The temperature of the engine, battery voltage, presence of light and CO level in
the exhaust are transferred from engine to dashboard via CAN Protocol and these
readings are displayed through LCD on the dashboard. An external key is connected to
the dashboard for requesting data from engine when required. When key is pressed the
requesting data are transmitted from the engine and displayed through LCD.
Gas sensor has high sensitivity to Propane, Butane and LPG, also response to
Natural gas. The sensor could be used to detect different combustible gas, especially
Methane; it is with low cost and suitable for different application. This project targets in
the development of a system where we can monitor various vehicle parameters such as
Temperature, CO percentage in the exhaust, Battery Voltage and LDR through CAN
protocol.
APPLICATIONS
Vehicle applications
Home applications
Industrial applications
ADVANTAGES
High speed
Accuracy
Less losses
ZEBROS PROJECTS
Office Address: No 4 / Flat No 3D, Sai Kiran Apts, First Main Road, Kasturba Nagar, Chennai-20 web: www.zebros.in e mail : [email protected] mob: 99400 98300,9500075001
ZEBROS PROJECTS
SOFTWARE BASED HARDWARE BASED
Networking VLSI
Data Mining Mat lab
Grid Computing Robotics
Network Security Embedded
Image Processing Bio Medical
Web Applications Power Systems
Mobile Computing Power Electronics
Software Engineering Java with Embedded
Cloud Computing Android
What is IEEE?
The Institute of Electrical and Electronics Engineers or IEEE (read eye-triple-e) is Incorporated in the State of New York, United States. It was formed in 1963 by the merger of the Institute of Radio Engineers (IRE, founded 1912) and the American Institute of Electrical Engineers (AIEE, founded 1884). A membership organization comprised of engineers, scientists and students that sets standards for computers and communications. It is a nonprofit organization with more than 365,000 members in around 150 countries.
The IEEE describes itself as "the world's largest technical professional society -- promoting the development and application of electro technology and allied sciences for the benefit of humanity, the advancement of the profession, and the well-being of our members."
Why IEEE based projects?
It grantees for standard
It assured latest solution for problems
It delivers new patented technologies at an ever-increasing pace
It access world-class technical information provided by the IEEE and cut down your
research time.
ZEBROS PROJECTS
Office Address: No 4 / Flat No 3D, Sai Kiran Apts, First Main Road, Kasturba Nagar, Chennai-20 web: www.zebros.in e mail : [email protected] mob: 99400 98300,9500075001
OUR FEATURES
24*7 Call Support
Project Execution through Remote System
20 Days Technical classes taken by Corporate Trainer
Unlimited Project & Technical Support through your academic
Project software Installation support
PROJECT SUPPORT
0th Review 1st Review
Abstract Existing System Disadvantages Proposed System Advantages Objective System Requirements System Architecture
Literature Survey Module List Module Description Data Flow Diagram Level DFD Module Wise DFD Problem Definition Review Document Explanation
2nd Review 3rd Review
Use case Diagram Class Diagram Collaboration Diagram Sequence Diagram Activity Diagram Testing & test cases Partial Code Screenshot for First two
module Review Document Explanation
Conclusion References Future Enhancement 65% code (Executable Format) Required Software Review Document Explanation
Final Review
Complete Code with Enhancement
Final Document (University Standard Format)
Complete Explanation for Project Concept & Code