Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1
DEPARTMENT OF PROSTHODONTICS
DISSERTATIONS
SN TITLE NAME OF THE P.G. UNIVERSITY YEAR
1. An Anthropometric evaluation of various craniofacial landmarks to determine the relative positions of maxillary canines in complete dentures.
Dr. Gangadhar. S.A. Mysore 1989
2. An investigation into the dietary habits and the nutritional status of ethnic edentulous patients reporting for complete denture treatment.
Dr. Rudraprasad. I.V.
Mysore 1989
3. An evaluation of water sorption property of various acrylic resins in human saliva.
Dr. Dayakara. H.R.* Mysore 1989
4. An evaluation of variation in systemic blood pressure using different medicaments for gingival retraction.
Dr. Suresh Sajjan. M.C.*
Mysore 1989
5. An epidemiological survey to assess the prosthodontic needs of the Karnataka population.
Dr. Ramesh K. Nadiger
Mysore 1991
6. Relevance of third point of reference during the face bow transfer.
Dr. Kashinath. K.R. Mysore 1991
7.
Oral health status, tooth mortality and morbidity rates, and validity and relevance of Kennedy’s classification as assessed by met and unmet prosthodontic needs – An epidemiological study in Karnataka.
Dr. Geeta. K. Mysore 1991
8. The accuracy of removable die systems for bridge castings- A comparison of three removable die systems.
Dr. Mahendranath Reddy
Mysore 1991
9. A clinical study to assess the effect of impression on retention in complete dentures using zinc oxide-eugenol and elastomeric materials.
Dr. K.V. Ramesh. Mysore 1992
10.
A qualitative estimation of residual monomer content in methyl methacrylate denture base resins with varying thickness processed under different conditions of time and temperature.
Dr. Jagadeesh. H.G. Mysore 1992
11. An experimental and clinical investigation of an aluminum alloy developed for fabricating cast partial denture framework.
Dr. Prafulla Chandra Reddy
Mysore 1992
12.
An investigation on the effect of dental stone and a layer of silicone putty material as an investing medium on tooth movement during the fabrication of complete dentures.
Dr. Rahul. G.R. Mysore 1992
13. A Photoelastic study comparing the stress transfer between a sleeved post and core and a
Dr. Ranjit Jayachandran*
Mysore 1992
2
conventional post and core systems.
14. A comparative study of two different thermal treatments in casting procedure for post-core system using a base metal alloy.
Dr. Surendra Kumar. G.P.
Kuvempu 1993
15.
A comparative study of the impact strength of conventional and reinforced self-cure poly-methyl methacrylate with aramid fibres used in the repair of acrylic denture bases.
Dr. Atley George. Kuvempu 1993
16. Analysis of pressures transmitted to the tissues, during maxillary and mandibular edentulous impression procedures.
Dr. Shuba. S. Rao Kuvempu 1993
17. A cephalometric evaluation of the effect of age on the constancy of the interocclusal rest space in two different age groups.
Dr. Jaison Jacob George
Kuvempu 1993
18.
A comparative study on the preservation of surface details of dental casts immersed in 5.25% sodium hypochlorite and 2% glutaraldehyde solutions used as disinfectants.
Dr. Ravi. M.S. Kuvempu 1993
19. A clinical study to assess the efficacy of four different materials used in developing posterior palatal seal.
Dr. Lambodharan. R.
Kuvempu 1993
20.
A computer aided three dimensional finite element stress analysis to evaluate the effect of design variability of three screw type endoesseous cylindrical titanium implant’s supporting a bar prosthesis when subjected to occlusal forces in three axes.
Dr. Akshay Bhargava.
Kuvempu 1994
21. A comparative study of accuracy of fit of four denture base resins after processing and after one month storage in water.
Dr. Anil Thomas. Kuvempu 1994
22. A comparative study to determine the efficacy of chlorhexidine gluconate and Listerine as plaque inhibitors on complete dentures.
Dr. Rajashekar Sangur
Kuvempu 1994
23. A clinical study to evaluate complete denture retention due to diurnal variation of tissues.
Dr. Roopali Kodolikar
Kuvempu 1994
24. A comparative study of transverse strength between rapid heat cure denture base resins and conventional heat cure denture base resins.
Dr. Hemanth Kumar. P.
Kuvempu 1994`
25. A comparative study of the accuracy of casting made in conventional and modified casting rings using a base metal alloy.
Dr. A. Chandrashekar*
Kuvempu 1994
26. A photometric investigation of the facial soft tissue profile of a Kannadiga population.
Dr. John Joy Mannappallil.
Kuvempu 1994
27. An evaluation of the effect of mono-poly coating on the fungal growth of a temporary soft liner – an in vitro study.
Dr. Satheesh. S. Pillay
Kuvempu 1994
3
28. A comparative study of flow and linear dimensional stability of four commercially available zinc oxide eugenol impression pastes.
Dr. Umesh Babu. S.B.
Kuvempu 1994
29. A comparative study of shear bond strength between acrylic tooth and denture base processed using two different curing cycles.
Dr. Venkat Reddy. A.
Kuvempu 1994
30. Biodegradation of Nickel and chromium from base metal alloys – An in vitro study.
Dr. Veena. S. Kuvempu 1994
31. An evaluation of cyanoacrylate adhesive for the treatment of traumatic ulcers in denture wearers.
Dr. Vinay Kumar. G. Kuvempu 1994
32. An in vitro study to assess the rheological properties of polymethylmethacrylate incorporated with 30% volume of highly drawn linear polyethylene fibers.
Dr. Anil Mathew. Kuvempu 1995
33. A comparative study on the preservation of surface quality of dental stone casts obtained from alginate impression treated with three different disinfectants.
Dr. Venkatarama Raju Alluri
Kuvempu 1995
34. An in Vitro study to compare the electrolytic etching of two commercially available Beryllium free Ni-Cr alloys using tensile bond strength.
Dr. Akshay Vohra Kuvempu 1995
35.
A comparative evaluation of transverse strength of conventional and reinforced autopolymerizing PMMA resin with cyanoacrylate used in the repair of denture base resins.
Dr. Nagaraj. K.R. Kuvempu 1995
36.
An inVitro study to compare the accuracy of fit of maxillary record bases on the casts using two commercially available autopolymerizing acrylic resins.
Dr. Vikas Sethi Kuvempu 1995
37.
A comparative study to determine the accuracy of stone casts obtained from irreversible hydrocolloid impression made with three different methods of material as adhesion to impression trays.
Dr. Nandeeshwar. D.B.
Kuvempu 1995
38.
A comparative evaluation of transverse and impact strengths of conventional and reinforced heat cure poly(methyl mehtacrylate) denture base resin with silane treated fibre glass.
Dr. Vasant Kumar. M.
Kuvempu 1996
39.
A comparative study of the ability of various impression techniques using a polyvinyl siloxane material to make duplicate dies from successive impressions.
Dr. Reuben Kurian Kuvempu 1996
40.
A comparative study of shear bond strength between composite veneer resin and Beryllium free Ni-Cr alloy using a fifth generation bonding agent – An in vitro study.
Dr. Vikas. B.V.J. Kuvempu 1996
41. An evaluation of two methods employed to increase the longevity of a temporary soft liner – An in vivo study.
Dr. Namita..S.Mehta Kuvempu 1996
4
42. A comparative evaluation of casting accuracy by two different methods of die spacer application.
Dr. George Attokaran
Kuvempu 1996
43. Effect of disinfection of autopolymerizing custom tray material on the tensile bond strength of an elastomeric impression material adhesive.
Dr. Sanju Pradhan Kuvempu 1996
44. The effect of rapid and overnight curing techniques on tooth movements in fabrication of complete dentures - A comparative study.
Dr. Ventatesh Suneel B.
Kuvempu 1997
45. An Evaluation Of Different Surface Treatments On The Transverse Strength of repaired acrylic joints – A comparative study.
Dr. Subash. M. Kuvempu 1997
46.
A comparison – Leaching of residual monomer content of two different acrylic denture base resins by high performance liquid chromatography in artificial saliva – An in vitro study.
Dr. Robin. K. Kuriokose
Kuvempu 1997
47. Comparison of three different face-bow mountings by cephalometric method – A clinical study.
Dr. George Francis Kuvempu 1997
48.
An evaluation of microleakage between composite venner resin and Beryllium free Nickel Chromium alloy using a fifth generation bonding agent – An invitro study.
Dr. Prakash Manne Kuvempu 1997
49.
A Comparative evaluation of impact and flexural strength of heat cured poly methylmethacrylate denture base resin in conventional form and reinforced with glass, aramid and nylon fibers – An in vitro study.
Dr. Jacob John Kuvempu 1997
50. Effect of water sorption on the tensile bond strength of two heat cure soft liners – In vitro study.
Dr. Khurshid. A. Mattoo
RGUHS 1998
51. Novel radiopaque fillers for polymethyl methacrylate – An in-vitro study.
Dr. Mathew Varghese
RGUHS 1998
52. Shear bond strength between composite veneer resin and Ni-Cr alloy using two different bonding agents – A comparative study.
Dr. Suresh. S. RGUHS 1998
53. Rheological properties of heat cure acrylic resin material incorporated with various inclusion fibers: A comparative study.
Dr. Rohit Veer Kumar
RGUHS 1998
54. Comparative study to evaluate surface hardness of die stone cast obtained after mixing with disinfecting solutions
Dr. Sandeep Kumar Grag
RGUHS 1998
55. The use of graphoanalysis as a diagnostic aid for successful prosthodontic treatment.
Dr. Sheeba Sood RGUHS 1998
56. A comparative study of the dimensional stability of various impression materials after treating them with different disinfectants, done on dental stone casts.
Dr. Ashish Chaturvedi
RGUHS 1999
57. A clinical and cephalometric study of the Dr. Byju Paul Kurian RGUHS 1999
5
relationship between facial form, facial profile and ridge relation in edentulous patients.
58.
A comparison to evaluate the compatibility of temporary soft liners with immersion denture cleansers and household cleansers – An in vitro study.
Dr. Dipanjit Singh RGUHS 1999
59. A comparative study of dimensional changes of different commercially available irreversible hydrocolloids poured at different time intervals.
Dr. Rajeev Kumar Reddy. K.
RGUHS 1999
60.
A Cephalometric study comparing the occlusal plane in dentulous and edentulous subjects in relation to the tragus of the ear in different profile subjects.
Dr. Joji Markose. RGUHS 1999
61. Effect of five brands of latex gloves on the setting time of polyvinyl siloxane putty impression materials.
Dr. Ravikumar. C.M. RGUHS 1999
62.
Comparative evaluation of the fit of maxillary complete denture base at the posterior palatal border made by heat cure acrylic resin processed on high expansion stone and type III dental stone.
Dr. Sunil Arora RGUHS 2000
63. Finite element analysis of complete denture exposed to simulated occlusal forces.
Dr. Divekar Niranjan Shridhar*
RGUHS 2000
64. A survey of various methods taught in dental colleges for determining the posterior palatal seal area.
Dr. Dhanya kumar. B.H.
RGUHS 2000
65. Study of the tensile bond strength of elastomer impression materials to the tray material at different drying time intervals of tray adhesives.
Dr. Smitha. M. RGUHS 2000
66. The effect of application of cement to various areas of the full coverage metal restoration and tooth on the marginal adaptation: An in-vitro study.
Dr. Deepika. C.V. RGUHS 2000
67. A study of dimensional change of autopolymerizing acrylic resin tray material with respect to time.
Dr. Shashidhara. H.S.
RGUHS 2000
68.
An evaluation of retention of maxillary denture bases prepared by using two border molded impression techniques: Manual border molding and functional border molding.
Dr. Brigitte Kunjumon. N.
RGUHS 2001
69. Histological evaluation of the maxillary labial frenum to determine the presence of muscle fibres.
Dr. Sreenivas Reddy K.
RGUHS 2001
70. A study to determine the position of neutral zone in relation to the crest of edentulous mandibular residual alveolar ridge.
Dr. Bhupinder Singh Parhar
RGUHS 2001
71. A comparative evaluation of the width of the permanent maxillary central incisors to the facial measurements.
Dr. Mainak Kanti Saha
RGUHS 2001
72. A comparative survey to study & determine the Dr. Dinesh RGUHS 2001
6
method/methods taught & materials used for making impressions & special tray designing in complete denture fabrication in various dental colleges in Karnataka & followed by private dental practitioners graduated from dental colleges in Karnataka.
Bhupendra. J.
73. A comparative evaluation of the dimensional accuracy of an alginate and improved alginate with that of the elastomer impression material.
Dr. Harpal Singh RGUHS 2002
74. A clinical study of the presence and distribution of melanin pigmentation in the anterior gingivae amongst the Indian population.
Dr. Sreedhar Reddy. S.
RGUHS 2002
75. A comparative study of the visibility of the anterior teeth during speech and smile in Indian male and female individuals of different age groups.
Dr. A. Khader Meeran. S.
RGUHS 2002
76. Effect of gum Arabic & Calcium Hydroxide On The Surface Hardness Of Type I, Type II & Type III Gypsum Products : A Comparative Study
Dr. Nitasha Kakkar RGUHS 2002
77. A study Of Application Of Prosthodontic Techniques In Private Practice : A Survey
Dr. Gurminder Singh RGUHS 2002
78.
A study Of evaluate The Variation In Mesio – Distal Angulation & Labio – Lingual Inclination of Maxillary Right & Left Lateral Incisors in Male & Female Population of Different Age Groups
Dr. Shalini. B.N. RGUHS 2002
79.
Comparative evaluation of the dimensional accuracy of three commercially available improved alginates when stored under different storage conditions and poured at different time intervals.
Dr. Praveen. G. RGUHS 2003
80. A Clinical Study to correlate the facial form and maxillary central incisor tooth form in males and females of davangere population.
Dr. Deepak Bansal RGUHS 2003
81. A Survey to determine the problems encountered in learnig prosthodontics by undergraduate students in various dental colleges of Karnataka
Dr. Mahantesh. S. B. RGUHS 2003
82.
A clinical study to correlate the shades of the maxillary anterior natural teeth of the people of Davangere district origin with that of the commercially available acrylic and porcelain shade guides
Dr. Punit R. S. Khurana
RGUHS 2003
83.
A comparative evaluation of effect of hard soft& distilled water on the setting time & dimensional accuracy of – regular & improved alginate – An in vitro study.
Dr. Tony John Varghese
RGUHS 2004
84.
A survey to assess the reasons for the edentulousness & the need for complete denture prosthesis in relation to age, sex, literacy levels & socio-economical status of rural & urban population of Davangere district.
Dr. Venugopal Rao. N*
RGUHS 2004
7
85.
A survey to determine the different cleansing agents used & methods followed & there effect on the denture cleanliness among rural & urban denture wearers in Davangere district.
Dr. Megharaj M. D. RGUHS 2004
86. A study to co-relate facial midline with dental midline, & also between maxillary midline to mandibular midline among Indian population.
Dr. Vivek Gopalkrishna. S.
RGUHS 2004
87. A study to compare the size of the artificial posterior teeth with that of the natural posterior teeth & the residual alveolar ridge.
Dr. Sunitha B. Patil RGUHS 2004
88.
Comparative evaluation for the dimensional accuracy of three commercially available brand of improved alginates with that of one commercially available brand of addition of polyvinyl silioxane- A clinical study.
Dr. Ranganatha Rao. J.K*
RGUHS 2005
89.
A comparative study of the impact strength and flexural strength between a conventional heat cure denture base resins and various commercially available high impact strength denture base resins.
Dr. Vinitha K.B. RGUHS 2005
90. Study of tensile bond strength of elastomeric impression material to different tray materials in different surface conditions
Dr. Seema Arora RGUHS 2006
91. Reliability of Broderick flag in determination of curve of spee in Indian population
Dr. Jagadeesh. K.N. RGUHS 2006
92.
A clinical study to compare between manually and physiologically moulded denture bases and varying angulations of buccal flange of mandibular denture on the effect of food retention in complete denture wearers.
Dr. Lakshmipathi Reddy. P.
RGUHS 2006
93. A comparative study to determine the wettability and castablity of different hydrophilic and hydrophobic elastomeric impression materials.
Dr. Vivekanand Reddy. G.
RGUHS 2006
94. The effect of topical fluorides on dental porcelain – an in vitro study
Dr. Soudhamini. V. Rao
RGUHS 2006
95.
A clinical study to compare between resting and stimulated whole salivary flow rate and PH before and after complete denture placement in different age groups
Dr. Muddugangadhar. B.C.
RGUHS 2006
96.
Comparision of oral stereognosis in satisfied and dissatisfied patients with their complete dentures that are professionally assessed as being good and poor – A clinical study
Dr. Sahul Lerra RGUHS 2007
97. The effect of placement of Silane treated and untreated fibers on the facture resistance of interim fixed partial dentures
Dr. Basant Gupta RGUHS 2007
98. A clinical study to correlate the inner canthal distance and mesiodistal width of maxillary central
Dr. Javeed Afroz RGUHS 2007
8
incisor in terms of geometric progression in Davangere district population
99. Effect of slurry water and microwave over drying on the surface hardness of different commercially available type IV die stone
Dr. Sounyala Rayannavar
RGUHS 2007
100. The effect of two denial desensitizer sealers on retention of full veneers crowns with three types of luting cements.
Dr. Renuka Prasad. K.S.
RGUHS 2007
101. A clinical study to examine the effect of complete dentures on the head posture/cranio vertical angle.
Dr. Amit Kumar Khare
RGUHS 2007
102.
An in vitro study to compare the effect of two etching techniques on the tensile bond strength of resin cement bonded to non-noble alloy and enamel.
Dr. Sudheer. A. RGUHS 2007
103. A comparative study to determine strength of auto polymerizing composite resin influenced by temperature during polymerization – an invitro study
Dr. Anuj Chhabra RGUHS 2007
104. Comparative evaluation of the accuracy of three removable die systems using two different die stones – an invitro study
Dr. Bandari Dheeraj RGUHS 2007
105. Influence of porcelain thickness and repeated firings on the color of metal-ceramic restorations - An in vitro study
Dr. Khanna Tulika S. RGUHS 2008
106. An in-vitro study to compare and correlate the accuracy and dimensional stability of four interocclusal recording materials.
Dr. Gurav Sandeep V.
RGUHS 2008
107. A Clinical study to evaluate and compare the masticatory performance in complete denture wearers with and without soft liners
Dr. Sreeharsha. T. V.
RGUHS 2008
108.
The effect of refrigeration on working time, impact strength, flexural strength and surface hardness of heat cure acrylic resin denture base material at different storage intervals - An invitro study.
Dr. Ramakrishna. M. RGUHS 2008
109. Comparison of functional potential of mandibular denture made by using two neutral zone impression techniques - ACS
Dr. Sumit Makkar RGUHS 2008
110. Comparison of absorption and solubility of different soft lining materials in distilled water, artificial saliva and denture disinfectant solution.
Dr. Suresh Kumar. S. K.
RGUHS 2008
111. An in vitro study of evaluate the effect of disinfection and water immersion on the hardness of two heat polymerized denture base resins.
Dr. Muvva Suresh Babu
RGUHS 2009
112. An invivo study to record bite force until denture dislodgement of an existing and new maxillary denture with and without use of denture adhesive.
Dr. Chandrakala. V. RGUHS 2009
9
113. A Clinical study to evaluate the correlation between maxillary central incisor form and face form in Indian population.
Dr. Pavan Kumar. K R
RGUHS 2009
114.
An in vitro study to compare the effect of different medicaments on surface reproduction of two commercially available poly vinyl siloxane impression materials.
Dr. Reena Saluja RGUHS 2009
115. A Clinical study to analyze relation between camper’s plane and natural occlusion plane in normal dentulous subjects.
Dr. Kuldeep Singh RGUHS 2009
116. An in vitro study to identify the marginal defects in fixed prosthodontics restorations using explorers.
Dr. Vikram Kapoor RGUHS 2009
117.
Comparison of linear dimensional variability of two commercially available heat cure denture base resins & one self cure denture base resin immediately after processing & storage in water
Dr. Praveen. S. RGUHS 2010
118. An invitro study to evaluate & compare compatibility of two different types of irreversible hydrocolloid with type III & type IV dental stone
Dr. Anju Aggarwal RGUHS 2010
119. Effect of various disinfectant solutions on colour stability of acrylic resin denture base materials
Dr. Pratibha Katiyar RGUHS 2010
120. Evaluation of stress distribution in U-shaped & V-shaped maxillary edentulous residual alveolar ridges by using finite element analysis
Dr. Manish kumar RGUHS 2010
121. An invitro study to evaluate the effect on dimensional changes of elastomers during cold sterilization
Dr. Khinnavar Poonam
RGUHS 2010
122.
“An in-vitro study to compare the effect of different curing methods, application of sealer, and subsequent storage in artificial saliva on the resiliency of two soft lining materials.”
Dr. Ashwin Kumar. S.
RGUHS 2011
123. “To study the influence of short term contamination by water and artificial saliva on hardness of three resin luting cements -an in -vitro study.”
Dr. Raghu. K.M. RGUHS 2011
124.
“A comparative study of condylar guidance setting obtained from interocclusal records and panoramic radiographs in both dentulous and edentulous patients.”
Dr. Sharad Acharya RGUHS 2011
125.
“An in vitro study to evaluate the dimensional accuracy of three polyvinyl siloxane impression materials using single mix and double mix techniques.”
Dr. Nirmala Kumari RGUHS 2011
126.
“A comparative study to evaluate the unrestricted linear dimensional changes of two hard chairside relines resins with two laboratory heat polymerizing resins.”
Dr. Shivsagar Tewary
RGUHS 2011
10
127.
“An in vitro study to investigate the flexural strength of heat polymerized denture base acrylic resin with addition of different percentage of aluminum oxide powder.”
Dr. Saritha. M.K. RGUHS 2011
128.
“A comparative study to evaluate the change in dimension and wettability of hydrophilic vinyl polysiloxane impression material after immersion and spray disinfection.”
Dr. Abhishek Tayal RGUHS 2012
129.
“An in vitro study to compare the influence of two denture cleansers on the color stability of two types of heat cure denture base resins processed by short and long curing cycle.”
Dr. D. Balamurugan RGUHS 2012
130. “An in vitro study to evaluate the impact strength and contact angle of heat cure acrylic denture base resin by the addition of Phosphate group (H3PO4).”
Dr. Mehta Vijal Mahesh.
RGUHS 2012
131. “Evaluation of dimensional change of auto polymerizing acrylic resin tray materials with respect to time and temperature – An in vitro study.”
Dr. Akshatha Nayak. RGUHS 2012
132. “Effect of missing or malposed canine on posterior attrition – A comparative study.”
Dr. Ruchika Mishra RGUHS 2012
133. “An in vitro study to compare the linear dimensional accuracy of four impression materials after immersion in disinfectant solutions.”
Dr. Aisha Tarannum RGUHS 2012
134. “Evaluation and comparison of color stability of prefabricated and custom-made eye prosthesis under dry and wet conditions – An in vitro study”
Dr. Chetan Pathak RGUHS 2013
135.
“A clinical study to evaluate the intercommisural width and the interalar width as guide’s for the selection of maxillary anterior teeth width in complete denture”
Dr. Kausar Jahan RGUHS 2013
136. “A spectrophotometric analysis of the effect of beverages on color stability of two autopolymerzing provisional restorative materials”
Dr. Priyanka. T.S. RGUHS 2013
137. “Effects of varying resin polymer/monomer ratios on three mechanical properties of a denture base resin.”: An in-vitro study
Dr. Nalawade Anagha Dattatraya
RGUHS 2013
138. “A study to evaluate the effect of silane treatment and 3 different woven fiber reinforcement on mechanical properties of a denture base resin.”
Dr. Sampat Saumil Chetan
RGUHS 2013
139.
“Evaluation of the influence of the natural head position on the inclination of various craniofacial planes of prosthodontic importance to the true horizontal plane”
Dr. Nair Rohit Unni RGUHS 2013
140. “An in-vitro study to compare the accuracy and dimensional stability of extended pour and conventional alginate impression materials.’’
Dr. Rohith. B RGUHS 2014
11
141. “A Spectrophotometric analysis of extraoral aging conditions on the color stability of two commercially available maxillofacial silicon elastomers.’’
Dr. Siddharth Mehta RGUHS 2014
142. “An in-vitro study to evaluate the effect of tray rigidity and three different impression techniques on the accuracy of polyvinyl siloxane impressions”
Dr. Achint Khullar RGUHS 2014
143.
“A comparative study of condylar guidance setting obtained form interocclusal records mounted on semiadjustable articulator (Artex type AR)with and without third point of reference and lateral cephalographs in edentulous subjects”-An in vivo study.
Dr. Mohammed Ziauddeen
RGUHS 2014
144. ‘‘An in vitro study to evaluate and compare the dimensional stability of different interocclusal recording materials’’-An in vitro study’’.
Dr. Ashish Bansal RGUHS 2014
145.
“Evaluation of cephalometric methods for determining vertical dimension of occlusion and orientation of occlusal plane in dentate subjects” – An Invivo study
Dr. Ritika Jaydev RGUHS 2014
146.
“To evaluate and compare the mechanical properties of a heat cure denture base resin on incorporation of 2% Quaternary Ammonium compound”-An vitro study.
Dr. Neha Arora RGUHS 2015
147. “To evaluate the effect of food colorants on provisional restorative materials”-An in vitro study.
Dr. Suvadip Kundu RGUHS 2015
148.
“Comparative analysis of Incisal edge position in an Articulator following Face-Bow transfer using an Orbital pointer and Bubble Gauge to indicate anterior point of reference’’-An in vivo study.
Dr. Shery Kundra RGUHS 2015
149.
“Comparative evaluation of the effect of two Endodontic sealers & luting cements on the Tensile bond strength of a Glass fiber post after artificial aging”-An in vitro study.
Dr. Sangeetha. K.M. RGUHS 2015
150.
“Evaluation of the Flexural strength of Maxillary heat cure PMMA Denture base Cross-Section with and without Nylon Denture base strip incorporated at mid palatine raphe region”- An in-vitro study.
Dr. Manish Airan RGUHS 2015
151. “Evaluation of the effect of Zirconium Oxide and Aluminium Oxide fillers on the flexural strength of heat-polymerized acrylic Resin”-An in vitro study.
Dr. Mahesh Kumar Reddy K.
RGUHS 2015
152.
“An in vitro study to analyze and compare the effect on the flexural strength of various cross linking agents used in auto polymerizing acrylic resins commercially available in India”.
Dr. Pulkit Chandra RGUHS 2016
153. “Comparing the effect of water –Temperature during polymerization on strength of two auto polymerizing resins used for provisional restorations”. An in vitro
Dr. Navneet Kumar RGUHS 2016
12
study.
154. “Comparative evaluation of crestal bone levels around platform switched and laser lok dental implants –A clinic-radiographic study.’’
Dr. Charu Gupta RGUHS 2016
155.
“A spectrophotometric analysis of effect of cement shade water storage and coffee staining on final colour of lithium di silicate glass ceramic”-An in vitro study.
Dr. Palavinder Kaur RGUHS 2016
156.
“A spectrophotometric analysis of effects of various finishing procedures on the staining of two commercially available auto polymerizing provisional restorative material”-An vitro study.
Dr. Mrudula. S. RGUHS 2016
157. Cephalometric analysis-An aid to determine vertical dimension of occlusion in edentulous patients” An in vitro study.
Dr. Merrily Nongsiej RGUHS 2016
158.
Comparison of dimensional accuracy of resultant cast made by two steps and a novel two step putty or light body elastomeric impression technique poured at different time intervals- an in-vitro study
Dr. Sri Ashwini B.K RGUHS 2017
159.
Influence of length of food platform on masticatory performance and bite force in mandibular unilateral distal extension removable partial dentures – A clinical study
Dr. Mulchandani Monica
RGUHS 2017
160.
Evaluation of dimensional accuracy and surface detailed reproduction of alginate mixed with chlorohexidine solution of different different concentrations- An in vitro study
Dr. Kim Maria George
RGUHS 2017
161.
A comparative evaluation of the flexural strength, elastic modulus, impact strength and hardness of three commercially available flexible denture base material – An invitro study
Dr. Leela B RGUHS 2017
162. Comparison of color stability between conventional heat cure acrylic and hypoallergenic denture base resins- An in vitro study
Dr. C. H. Shashank RGUHS 2017
163. A comparative evaluation of gingival displacement by different retraction techniques – A crossover trial Dr. Arpit J Halani RGUHS 2018
164. Effect of antifungal agent incorporation on mechanical properties of medical grade prosthetic silicone elastomer: An in vitro study
Dr. Rasalika
Agrawal RGUHS 2018
165. A spectrophotometric analysis on effect of denture cleansers on the color stability of different layered acrylic denture teeth –An in vitro study
Dr. Karunakar
Keshav RGUHS 2018
166.
A comparative evaluation of retention between two commercially available core buildup materials and silanized & non- silanized glass fibre post- An in-vitro study
Dr. Sakshi Verma RGUHS 2018
167. Radiographic evaluation of crestal bone level in all on four treatment concept – A prospective study
Dr. Athira Suresh RGUHS 2018
13
168.
Evaluation of stability, bone level ,gingival esthetics& success rate in immediately provisionalized dental implant replacing single missing maxillary or mandibular tooth: A prospective study
Dr. Manisha Singh RGUHS 2018
169.
Determining the mesiodistal width of maxillary central incisor by correlating the inner canthal distance and interpupillary distance to geometric proportion and biometric width respectively among davangere population – An in vivo study
Dr. Abhimanyu Narain
RGUHS 2019
170.
Influence of three different post systems on the fracture resistance of endodontically treated maxillary central incisors after artificial aging -An in vitro study
Dr. Sagar Sachdeva RGUHS 2019
171.
Partial edentulism and its correlation to demographic status and prevalence of various kennedy’s classes and the treatment of choice in the davangere population – A prospective study
Dr. Haitham Hesham
RGUHS 2019
172. Clinical study to evaluate wear effect of zirconia dental restoration and feldspathic porcelain fused to metal restorations on teeth enamel
Dr. Surbhi Garg RGUHS 2019
173.
To evaluate and compare the accuracy of definitive casts using different splinting techniques on implant level impressions in all-on-four treatment protocol - An in vitro study
Dr. Daya Shankar RGUHS 2019
174. Comparitive assessment of denture disinfecting ability of 1% sodium hypochlorite and microwave irradiation – An invivo study
Dr. Patel Disha Ravindrabhai
RGUHS 2019
175.
Analysis and comparison of effect of different crown height on stress distribution in splinted and non splinted short dental implant components and their surrounding bone: A 3D finite element analysis.
Dr Geethu Jose RGUHS 2020
176. Evaluation of crestal bone level and pink esthetic score using socket shield technique for immediate implant placement- A clinico-radiographic study
Dr Coelho Maban Carmeen
RGUHS 2020
177.
Comparision of chewing efficiency between conventional complete denture and immediately loaded single implant retained mandibular over denture and evaluation of marginal bone loss around immediately loaded single implant
Dr Bharath Panjanan D
RGUHS 2020
178.
Evaluation and comparative of water sorption and water solubility of a tissue conditioner after incorporation of Melalueca oil as antifungal agent – An Invitro study
Dr Supriya Nandi RGUHS 2020
179. A study on visible iris diameters as a surrogate measure for width and length of maxillary central incisors
Dr Anubhav Roy RGUHS 2021
180. A study to compare post cementation hypersensitivity between glass ionomer and resin luting cement: A split mouth study
Dr Ruyina Asma RGUHS 2021
181. A study to compare salivary pH, uric acid, C reactive protein and IgA levels before and after wearing removable complete dentures
Dr Ruchira Paul RGUHS 2021
14
182.
To evaluate and compare the stress distribution in titanium, Yttrium stabilized zirconium dioxide and Peek dental implants & on the surrounding bone – A 3D Finite element analysis.
Dr Sharon Maria Thomas
RGUHS 2021
183. Evaluation of the proximal contact tightness between full coverage metal crown and adjacent natural teeth – An invivo study
Dr Popat Tanmay RGUHS 2021
184.
To evaluate and compare residual methyl methacrylate monomer content in heat cure acrylic denture resin using different curing method with and without post polymerization treatment – An invitro study
Dr Kasar Nishigandha Balasaheb
RGUHS 2021
LIBRARY DISSERTATION
SN TITLE NAME OF THE P.G. UNIVERSITY YEAR
1. Implants An Overview Dr. Ashish Chaturvedi RGUHS 2000
2. Ceramics in Prosthodontics Dr. Byju Paul Kurian RGUHS 2000
3. Tissue conditioners Dr. Dipanjith Singh RGUHS 2000
4. Psychological considerations in complete dentures
Dr. Sheeba Sood RGUHS 2000
5. Osseointegration Dr. Rajeev Reddy K. RGUHS 2000
6. Overdentures Dr. Ravikumar C.M. RGUHS 2000
7. Role of P.P.S area in complete denture Dr. Dhanya Kumar B.H. RGUHS 2001
8. Aesthetics in complete dentures Dr. Deepika C.V. RGUHS 2001
9. Obturators Dr. Niranjan Divekar RGUHS 2001
10. Face-Bow Dr. Shashidhar H.S. RGUHS 2001
11. Residual Ridge Resorption Dr. Sunil Arora RGUHS 2001
12. Infection Control in prosthodontics Dr. Bupinder Singh RGUHS 2002
13. Die Systems Dr. Brigette Kunjuman N. RGUHS 2002
14. Single Complete denture Dr. Mainak Kanti Saha RGUHS 2002
15. Soft tissue management before making impression in complete denture
Dr. Rajeev Srivastava RGUHS 2002
16. Prosthodontic considerations in medically compromised patients
Dr. Srinivas Reddy K. RGUHS 2002
17. Hydrocolloid impression materials Dr. Harpal Singh RGUHS 2002
18. Rigid impression material Dr. Khader Meran Sahib RGUHS 2002
15
19. Impression trays Dr. Sreedhar Reddy S. RGUHS 2002
20. Complete denture esthetics Dr. Gurminder Singh RGUHS 2003
21. Silicone elastic impression materials Dr. Nitasha Kakkar RGUHS 2003
22. Veneers Dr. Shalini B.N. RGUHS 2003
23. Impression techniques in F.P.D Dr. Tony Jhon Verghese RGUHS 2004
24. Maxillofacial Prosthetic materials Dr. Megharaj M. Doddegowdar
RGUHS 2004
25. Occlusal Splints Dr. Sunitha B.Patil RGUHS 2004
26. Biomechanics in implant dentistry Dr. Venugopal Rao RGUHS 2004
27. Principals of tooth Preparations Dr. Vivek Sharma RGUHS 2004
28. Prosthodontic Procedures In Endosseous Dental Implants
Dr. Ranganath Rao J.K. RGUHS 2005
29. Restoration of endodontically treated teeth Dr. Deepak Bansal RGUHS 2005
30. Occlusion in complete denture Dr. Mahantesh S.B. RGUHS 2005
31. Gingival Displacement in fixed Prosthodontics
Dr. Praveen G. RGUHS 2005
32. Articulators Dr. Punit R.S.Khurana RGUHS 2006
33. Prosthodontic consideration in the rehabilitation of maxillofacial defects
Dr. Seema Arora RGUHS 2006
34. Maxillofacial Reconstruction using osseointegrated implants
Dr. Vinitha K.B. RGUHS 2006
35. Dental Surveyors Dr. Jagadeesh K.N. RGUHS 2006
36. Biomaterials for dental implants Dr. Muddugangadhar B.C. RGUHS 2006
37. Smile and smile design Dr. Vivekanand Reddy G. RGUHS 2006
38. Immediate dentures Dr. Lakshmipathi Reddy P. RGUHS 2006
39. Alloys for prosthodontic consideration Dr. Soudhamini V.Rao RGUHS 2006
40. Precision attachments Dr. Sahul Lerra RGUHS 2007
41. Indirect retention in Partial denture design Dr. Basant Gupta RGUHS 2007
42. Age changes in geriatric patents Dr. Sudheer A. RGUHS 2007
43. Temperomadibular disorders Dr. Dheeraj Bandari RGUHS 2007
44. Dental casting procedures and defects Dr. Renuka Prasad K.S. RGUHS 2007
45. Prostho-Perio relationship Dr. Sounyala Rayannnavar RGUHS 2007
16
46. Occlusal considerations for implant supported prosthesis
Dr. Javeed Afroz RGUHS 2007
47. Impressions in complete denture Dr. Amit Khare RGUHS 2007
48. Provisional Restorations Dr. Anuj Chhabra RGUHS 2007
49. Failures in implants Dr. Tulika Khanna S. RGUHS 2008
50. Immediate loading in dental implants Dr. Sandeep Gurav V. RGUHS 2008
51. Implant retained over denture Dr. Sreeharsha T.V. RGUHS 2008
52. Phonetic considerations in complete denture
Dr. Ramakrishna M. RGUHS 2008
53. Single tooth implant Dr. Sumit Makkar RGUHS 2008
54. Diagnostic aids in implants and its clinical implications
Dr. Suresh Kumar S.K. RGUHS 2008
55. Recent advances in dental ceramics Dr. Muvva Suresh Babu RGUHS 2009
56. Importance of neutral zone in prosthodontics
Dr. Chandrakala V. RGUHS 2009
57. Osseointegration in dental implants Dr. Pavan Kumar. K. R. RGUHS 2009
58. Esthetic analysis of anterior FPD Dr. Rina Singh RGUHS 2009
59. Diagnosis and treatment planning in implant patients
Dr. Kuldeep Singh RGUHS 2009
60. Cements and cementation procedures in FPD
Dr. Vikram Kapoor RGUHS 2009
61. Evaluating centric relation records Dr. Praveen S. RGUHS 2010
62. Full mouth rehabilitation Dr. Anju Aggarwal RGUHS 2010
63. Prosthetic rehabilitation of acquired defects of the mandible
Dr. Pratibha Katiyar RGUHS 2010
64. Abutments in implantology Dr. Manish Kumar RGUHS 2010
65. Failures in tooth supported fixed partial dentures
Dr. Poonam K. RGUHS 2010
66. Laboratory procedure for planned partial denture
Dr. Ashwin Kumar. S. RGUHS 2011
67. Implant guiding systems Dr. Raghu. K.M. RGUHS 2011
68. Esthetics Dr. Sharad Acharya RGUHS 2011
69. Magnets in prosthodontics Dr. Nirmala Kumari RGUHS 2011
70. Intraocclusal records Dr. Shivasagar Tewary RGUHS 2011
17
71. Pontics Dr. Saritha M.K. RGUHS 2011
72. Interoccular appliances Dr. Balamurugan RGUHS 2012
73. Laboratory procedures in implants Dr. Vijal Mehta RGUHS 2012
74. Residual Ridge resorption and its management
Dr. Akshatha Nayak RGHUS 2012
75. Eye prosthesis Dr. Aisha Tarannum RGHUS 2012
76. Post &core Dr. Abhishek Tayal RGHUS 2012
77. Forensic Dentistry Dr. Ruchika Mishra RGUHS 2012
78. Imaging modalities in implant dentistry Dr. Anagha D. Nalawade RGUHS 2013
79. All ceramics Dr. Kausar Jahan RGUHS 2013
80. Esthetic in implant Dentistry Dr. Saumil C. Sampat RGUHS 2013
81. Clinical Complications in Dental Implant Dr. Chetan Pathak RGUHS 2013
82. Radio therapy prosthesis Dr. Rohith Nair RGUHS 2013
83. Geriatrics In Prosthodontics Dr. Priyanka T.S. RGUHS 2013
84. Smile &smile design Dr. Rohith B. RGUHS 2014
85. Management of Velopharyngeal Defects Dr. Siddharth Mehta RGUHS 2014
86. Advances in Shade selection Dr. Reetika Jaidev RGUHS 2014
87. Prosthetic option in implant dentistry Dr. Mohammed Ziauddeen M RGUHS 2014
88. Computer Aided designing & computer aided manufacturing
Dr. Achint Khullar RGUHS 2014
89. Restricted Mouth opening & Prosthodontic management
Dr. Ashish Bansal RGUHS 2014
90. Platform switching in implants Dr. Suvadip Kundu RGUHS 2015
91. Prosthodontic management of Tempero-mandibular disorders
Dr.Neha Arora RGUHS 2015
92. Nanotechnology Dr. Manish Airan RGUHS 2015
93. Dental implant designs & Surfaces Dr. Mahesh Kumar Reddy RGUHS 2015
94. Preventive Prosthodontics Dr. Sangeetha K.M. RGUHS 2015
95. Loading in implant Dr. Shrey Kundra RGUHS 2015
96. Occlusion in conventional complete dentures
Dr. Mrudula. S RGUHS 2016
97. Retention in maxillofacial prosthesis Dr. Pulkit Chandra RGUHS 2016
18
98. Finish lines Dr. Charu Gupta RGUHS 2016
99. Digital imaging , CADCAM & Rapid prototyping
Dr. Palvinder Kaur RGUHS 2016
100. Face Bows Dr. Navneet Kumar RGUHS 2016
101. Lasers in Prosthodontics Dr. Merrily Nongsiej RGUHS 2016
102. Nano technology in Titanium dental implants
Dr. Sriashwini B. K RGUHS 2017
103. Laminates & Veneers Dr. Shashank. C. H RGUHS 2017
104. Implant Occlusion Dr. Mulchandani Monika RGUHS 2017
105. Osseointegration Dr. Kim Maria George RGUHS 2017
106. Zirconium in Prosthodontics Dr. Leela. B RGUHS 2017
107. Essentials of occlusal rehabilitation Dr. Arpit J Halani RGUHS 2017
108. Recent advances in Implants Dr. Rasalika Agarwal RGUHS 2018
109. Occupational health hazards in Prosthodontics
Dr. Karunarkar Keshav RGUHS 2018
110. Occlusion in fixed prosthesis Dr. Sakshi Verma RGUHS 2018
111. Implant abutments & Connections Dr. Athira Suresh RGUHS 2018
112. All on four – Prosthetic concept Dr. Manisha Singh RGUHS 2018
113. Auricular prosthesis Dr. Abhimanyu Narain RGUHS 2019
114. Implant Failures - Revisited Dr. Sagar Sachdeva RGUHS 2019
115. Implant stents Dr. Surbhi Garg RGUHS 2019
116. Emergence profile Dr. Haitham Hesham RGUHS 2019
117. Titanium and its application in prosthodontics
Dr. Daya Shankar RGUHS 2019
118. Anterior guidance in Full mouth rehabilitation
Dr. Patel Disha Ravindrabhai RGUHS 2019
119. Nanomaterials in Implant dentistry Dr. Geethu Jose RGUHS 2020
120. Management of maxillofacial defects in mandibular arch
Dr Coelho Maban Carmeen RGUHS 2020
121. Implant Abutments Dr. Bharath Panjanan D RGUHS 2020
122. Management of maxillofacial defects in maxillary arch
Dr. Supriya Nandi RGUHS 2020
123. Computer applications in Prosthodontics Dr. Anubhav Roy RGUHS 2021
19
124. Prosthetic parts in implants Dr .Ruyina Asma RGUHS 2021
125. Impressions techniques in implant dentistry
Dr .Ruchira Paul RGUHS 2021
126. Esthetics in FPD Dr. Sharon Maria Thomas RGUHS 2021
127. Virtual Articulator Dr. Popat Tanmay RGUHS 2021
128. Digital smile designing Dr. Kasar Nishigandha Balasaheb
RGUHS 2021