Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1 Visit Report
1
DEPARTMENT OF CIVIL ENGINEERING
Grid Contour Survey Report
19th March 2017
AT
Bortalav, Bhavnagar
Principal H.O.D.
Dr. H.M. Nimbark Prof. K.V. Purohit
Guided By:
Prof. Vijay G Parmar, Jr. Ajay B Nakum
2 Visit Report
2
Content
(1) Acknowledgement 3
(2) Information 4
(3) Purpose of Survey 4
(4) What we learnt? 5
(5) Conclusion 8
3 Visit Report
3
ACKNOWLEDGEMENT
We the students of civil engineering, are really thankful to our
Principal and the Head of the Department of civil branch of GMIT,
Dr. H.M. Nimbark sir and Prof. Kishan Purohit respectively, for the
knowledgeful survey work at Bortalav, Bhavnagar.
4 Visit Report
4
General Information
The department of Civil Engineering has organized
a grid contour survey on 19th March 2017 at Valukad
village of Bhavnagar district.
Survey started at sharp 10:00 am. Prof. V.G.
Parmar, explained the importance, contour survey
application and all procedure of grid contour survey;
that services are offered with the help of contour lines
which are the virtual lines drawn on the surface that
represents a particular elevation.
Purpose of Conducting the Survey
Our main purpose for this survey is to be familiar with
industrial environment and to get practical knowledge
of surveying and use of its instruments in field. Also in
4th semester subject like Surveying requires knowledge
about how different instruments are used in the field,
so it is very much convenient to see all the practical
and components in real time work environment.
5 Visit Report
5
What We Learnt
A contour line is a line that connects points of equal
elevation. Grid survey is usually carried out in order to
have an accurate record of the existing conditions of a
portion of flat land surface that is about to undergo
some type of construction activity.
Then the all the students were divided into three
groups at different stations. Students who had a good
observing dumpy level skill took reading at both
stations.
6 Visit Report
6
The indirect method of grid contour survey was
adopted. In this method, 15m*15m area was plotted
and guide points were selected along of 3m lines and
their elevations were found.
The points were then plotted and contours were
then drawn by interpolation. While interpolating, it was
assumed that slope between any two adjacent guide
points to be uniform.
7 Visit Report
7
The contour lines were drawn by interpolation. The method is used when the area to be surveyed is small and the ground is not undulating. At each line, at a distance of 1m, the elevations were collected. At all the lines, total 250 readings were taken. The elevation at the corner of the square was then determined by means of a level and a staff. Then, students took reading by the dumpy level for Computing distances and elevations of earthwork of their station.
8 Visit Report
8
Conclusion
By going the grid contour survey map can be drawn, so
that one can select most economical or suitable site for
Construction.
9 Visit Report
9
PREPARED BY Joshi Jay
Kishan Kabir
Trivedi Malay
ParMar Kishan
Yash Kajawadra