DEPARTMENT OF AUTOMOBILE · PDF fileby held at Buddh International circuit, Greater Noida at New Delhi from 29th to 31st March 2016 Association of ... Department of Automobile Engineering,

24-01-2017 1 Department of Automobile Engineering,

BSAU

FACULTY & STAFFDETAILS

24-01-2017 Department of Automobile Engineering,

BSAU 2

Faculty Nos

Professor 1

Assistant Professor 9

Faculty with Ph.D 2

Faculty Pursuing Ph.D 8

STAFF Nos

Technical 5

Admin 2

FACULTY QUALIFICATION, EXPERIENCE & AREA OF RESEARCH

S.

No

Name Qualification Designation Experience(Years) Area of Research

Academic Industry

1 Dr. M. Subramanian B.E, MBA.,M.E.,Ph.D Professor &

Head

16 . 5 22 I. C Engines

2 Dr. K. Prabu B.E,.M.E.,Ph.D Assistant

Professor

2.5 1.5 Vehicle Dynamics

3. Mr. V. Deepan B.E.,M.E

Assistant

Professor

6 - Vehicle Dynamics

4 Mr. C.K. Arvinda

Pandian

B.E.,M.E.

Assistant

Professor

5 - Automotive

Materials

5 Mr. S. Karthikeyan B.E.,M.E Assistant

Professor

12 - I. C Engines

6 Mr. D. Roshan B.E,.M.S.,M.E Assistant

Professor

5 - CFD

7 Mr. N. Rajmohan B.E.,M.E Assistant

Professor

2.5 - I. C Engines

8 Mr. C. Dineshkumar B.E.,M.E Assistant

Professor

2.5 - Automotive Safety

9 Mr. ManuJoseph B.E,.M.E

Assistant

Professor

5 - Automotive

Aerodynamics

10 Mr. N. Kamesh B.E,.M.E., Assistant

Professor

0.5 - Automotive

Aerodynamics

Average Experience 4.1 2.35

24-01-2017 3 Department of Automobile Engineering,

BSAU

Students Details B. Tech (Automobile Engineering)

Year Approved Strength Actual Strength

I 60 31

II 60 43

III 60 48

IV 60 37

Total 240 159

Staff Student Ratio 1:24 1:16


BSAU 4

THRUST AREAS

Vehicle Dynamics

Vehicle Design

Renewable Energy and Emission Control


BSAU 5

S. No

Name of the

Supervisor

Area of Research

No. of Research Scholars

Completed On-going

1 Dr. M. Subramanian I.C. Engines - 6

2 Dr. K. Prabu Vehicle Dynamics - 4

RESEARCH SCHOLARS FROM INDUSTRIES

S. No

Name of the Scholar

Designation Industry Area of Research

Name of the Supervisor

1. R. Govindhoss Senior General Manager

UCAL fuel system, Chennai

I.C. Engine Fuel System

Dr. M. Subramanian

2 N. Venkatesh Deputy Manager – System Engineer

BOSCH, Chennai Vehicle Dynamics

Dr. K. Prabu

3 V.S. Sethukannan Assistant Consultant

Tata Consultancy Services, Chennai

Vehicle Dynamics

Dr. K. Prabu

4 P. Arjunraj ,

Senior Engineer- R &D

Mahindra & Mahindra Ltd,

Chennai

I. C. Engines Dr. M. Subramanian


BSAU 6

Research Publications Year No. of Publication / Review Articles

International Journal National Journal International Conference

National Conference

2016 4 5 1 11

2015 1 - 2 -

2014 2 - 3 4

2013 5 - 6 -

2012 3 -

1 1


BSAU 7


BSAU 8

LABORATORIES

S. No. Name of the Laboratory Total Amount (in lakhs)

01 Engine Testing Lab 15.0

02 Four Wheeler lab 2.0

03 Two and Three wheelers Lab 8.5

04 Research & Development 6.3

05 Structural & Vibration Analysis

lab 5.75

06 Automotive Electronics Lab 5.25

07 Vehicle Maintenance Lab 6.87

08 Engine Components Lab 2.57

Grand Total 52.24 24-01-2017

Department of Automobile Engineering, BSAU

9

MAJOR EQUIPMENTS


BSAU 10

Name Purpose Cost (in lakhs)

Wheel Alignment Apparatus

Caster, Camber, Toe in, Toe out, Measurement

3.0

MAJOR EQUIPMENTS


Leaf Spring, Coil Spring and Shock Absorber Tester

Analyse the Vibration and Load Characteristics

3.5


BSAU 11

MAJOR EQUIPMENTS


Four Stroke four cylinder Petrol Engine

Engine Performance Testing 2.0


BSAU 12

MAJOR EQUIPMENTS Name Purpose Cost (in lakhs)

Fuel Injection Pump Calibration Machine

To analyse the performance fuel

injection pump

2.1


BSAU 13

MAJOR EQUIPMENTS


Four stroke single cylinder Diesel Engine with Eddy current Dynamometer

Engine performance and combustion analysis

6.3


BSAU 14

INDUSTRIAL PARTICIPATION IN AUTOMOBILE DEPARTMENT

ACTIVITIES

1. P. Arjunraj , Engineer R &D – Mahindra & Mahindra Ltd

2. Mr.K. Sethubaskaran, General Manager (Engines Division), Ford India Pvt Ltd

3. Dr. N. Kulasekharan, AGM, Virtual Engineering – Fiat Chrysler Automobiles

4. V.S. Sethukannan, Assistant Consultant – Tata Consultancy Services

5. R. Govindhoss – Senior General Manager, UCAL fuel system , Chennai

6. N. Venkatesh,Deputy Manager- System Engineering, BOSCH

7. R. Sathish, Director, Product Engineering, Modine Thermal Systems Pvt Ltd.

8. Anil Kaul, Associate Vice President -Sales & Marketing,Comstar Automotive Technologies.

9. M. Sathish, Divisional Manager- Ashok Leyland

10. Yogeshnagendiran, Senior Engineer, Renault Nissan

11. Mr. Sureshkumar Gurusamy, Senior Manager, Product Engineering, Daimler India Commercial

vehicles Pvt.Ltd

12. Mr. Ganeshkumar, Senior Manager, Tractors and farm Equipment Ltd,(TAFE)

13. V. Sridhar, Senior Manager,QHSE (Quality Health safety environment systems) - Brakes India Pvt

Ltd

14. A. Ashokan, Deputy Manager, QA (Quality Assurance)- Current Engineering- Vehicle – Royal

Enfield


BSAU 15

INDUSTRY INSTITUTE MEET


BSAU 16

Ashok Leyland, Chennai Mahindra & Mahindra

ltd, Chennai Royal Enfield, Chennai BOSCH, Chennai UCAL fuel system,

Chennai

TAFE, Chennai Renault Nissan,

Chennai Daimler, Chennai Fiat Crysler, Chennai Brakes India, Chennai

MAJOR INDUSTRIES

22nd October 2016

10th October 2015


BSAU 17

Mutual use of testing facility (interaction with

Mahindra & Mahindra, Chennai)

Joint research programmes and field studies by

faculty and Industry experts

Feasibility for industry professional to study part time

B.Tech /Ph.D. programme during evening hours

Memorandam of Understanding between the

Institute and industries to bring the two sides

emotionally and strategically closer

Participation of experts from industry in curriculum

development

Customized training programs for Industry

professionals

Handing of one credit / two credit courses

IIPC Outcomes


BSAU 18

Industrial participation in curriculum development as member of Board of studies

(Mr. K. Sethubaskaran, Ford India Pvt Ltd., Dr. Shankar Venugopal, Dean

Mahindra Technical Academy, Vice President, Mahindra & Mahindra Ltd.

Industry supported projects

Internship for faculty and students- Discussion with Mahindra & Mahindra is

going on in progress.

Adjunct faculty from industry to get latest inputs - Discussion with Mahindra &

Mahindra is going on in progress.

Joint Research programs

Research and Development, lab development and Joint collaboration

Memorandum of Understanding (MOU) to come together – Discussion with

Mahindra & Mahindra is going on in progress.

Industrial visit , Guest lecture, Joint workshops, Seminar and Conference

Training of employees

Value added programs

Skill development programs (students are trained in vehicle servicing with

dealers) Discussion with ASDC (Automotive skill development council) in progress.

Customized Training programs

Professional Body programs (ASOP- Automotive student orientation program,

SAEINDIA, Southern Section)

CONFERENCE, WORKSHOP,SEMINAR S. No Name Title Date

1. Conference (National) Two days National Conference on Emerging Trends in Automotive Technology

15th & 16th April 2016

2. Workshop Mobility Safety 8th September

2015

3 Seminar Vehicle Dynamics 11th October

2014


BSAU 19


BSAU 20

S.

No

Event Organized by Participation Remarks

1 International

development design

summit from 6th July 2014

to 3rd August 2015

Jointly by BSAU and Hive

Innospace, US Global

Development Lab.

K.S. Krishna Preethi B.

Tech final year Automobile

students participated

Designed a kit

for kids

towards

prevention of

road traffic

accidents (Kids

safety)

International development design

STUDENTS INTERNSHIP

• A. Ahmed Thaha, H. Ahmed, R. Feroz Raja, C. Jagadeeshwaran, A. Karthikeyan, T.K.M. Mohammed Gayaz, K. Mohammed Gayaz, K. Mohammed Suhail, T. Thanveer ahmed, K.B. Sivakumar of (Batch: 2011 -2015) final year B. Tech students undergone summer internship in Trans Car India Private Limited.

• Summer Training / Internship programme Programme In Trans Car India Private Limited Mercedes – Benz Volkswagen and Mahindra for final year Automobile Engineering students during summer vacation (May – June 2014) for a Period 50 – 60 days.

• Internship programme in Abra motors, Volkswagen and Zulaikha motos for final year students towards summer internship training was arranged from 19th june 2014 to 23rd june 2014.

• K.S. Krishna Preethi of third year B. Tech student (Batch: 2012 – 2016) undergone Internship (completed a project on Diversity parts location) in Renault Nissan.


BSAU 21

PLACEMENT DETAILS

S.No Year No. of Students On Campus Off Campus

1 2011 -2015 27 5 8

2. 2012-2016 60 5 27


BSAU 22

FOUR WHEELER LAB


BSAU 23


BSAU 24

FOUR WHEELER LAB RESTRUCTURED

Differential Brake system

Power steering Manual Steering

Lead trainer from Automotive Skill Development Council Visit to Restructured lab


BSAU 25

Mr. N. Balasubramanian, lead trainer from Automotive Skill Development

Council (ASDC) visited our department and lab on 25.11.2016. In

the restructured four wheeler laboratory he interacted with faculty. He

also enquired about working, application and advantages of hand made

models. He is impressed about faculty explanation and gave suggestion to

improve models. He really appreciated especially the braking system and

power steering system models. The lab visit is enriched with the presence of

Dr. Rajaraman (HoD Mech) and Mr. V. Deepan (Assit. Prof of Auto) explain the

models to Mr. N. Balasubramanian


BSAU 26

STUDENTS SPORTS ACTIVITIES

E. Illavarasan(Batch: 2012 -2016) Final year student – Participated and secured the 5th South India Positions in the Yogasana Championship-2015 -2016 organized by Padmam Yoga

A. S. Vivek (Batch: 2015 -2019) First year Automobile Engineering

student -University Ball Badminton Men Team for securing

the Runners-up Position in the South India level Open Tournament

organized by KaraikalBall Badminton Club at Karaikal on 17th and

18th October 2015 and for securing Winners position in the District level

CM Trophy Tournament Organized by SDAT (Sports Development

Authority of Tamilnadu) at Kancheepuram on 8th October 2015

STUDENTS ACHIEVEMENTS


BSAU 27

SOLAR VEHICLE

BAJA SUPRA

GOKART

PROFESSIONAL SOCIETY ACTIVITIES

S.No Competition Organized by Participation Remarks

1 GO KART 2015

National level GO Kart

championship Coimbatore

at Kari motor sport

speedway on 26th & 27th

January 2015

Imperial Society of

Innovative Engineers (ISIE)

A Team of 25 members

participated

8th position in all

over India.

2 SOLAR VEHICLE

Electric Solar Vehicle

Championship(ESVC)

Virtual event on 30th

October

Imperial Society of

Innovative Engineers (ISIE)

A team of 25 students and 1

faculty participated

They cleared the

virtual round with

standing of 16th

position out of 49

teams.

3 BAJA VEHICLE 2015

(ATV – All Terrain Vehicle)

competition at Pitampur,

Madhyapradesh, February

2015

Society of Automotive

Engineers(SAE)

A team of Third and final year

students along with mechanical

engineering students

Designed and

fabricated an All

TERRAIN VEHICLE

(ATV)

4 EFFICYCLE 2015

Virtual design competition

in Indore on 12.07.2015


Engineers(SAE)

Automobile Engineering

students participated Efficycle

2015

24-01-2017 Department of Automobile Engineering, BSAU

28

S.

No

Competition Organized by Participation Remarks

5 Inferno Kartv 2.0 - 2016

(Indian Karting Race) at

Coimbatore from

24.08.2016 to 29.08.2016

Imperial Society of

Innovative Engineers

(ISIE)

Automobile Engineering 15

students particpated

won the award

for light weight

award

6 Inferno kart

Team Dynamic Karting

Challenge 2016 organized

by held at Buddh

International circuit,

Greater Noida at New

Delhi from 29th to 31st

March 2016

Association of

Innovation and Mectra

Engineers (AIME)

A team of 22 students from

Department of Automobile

Engineering designed and

fabricated a GOKART

vehicle and participated

Won best

design and

auto cross

event award.

7 BAJA 2016 (ATV – All

Terrain

Vehicle)competition at

Pithambur ,Indore. from

16.02.2016 to 21.02.2016

(for 6 days)


Engineers(SAE)

A team of 20 students from

Automobile students along

with Mechanical students

are participated

secured 26th

rank in all over

india out of180

teams.

8 SAE SUPRA 2016

competition at Noida from

04.07.2016 to 09.07.2016.


Engineers(SAE)

A Team of 25 students from

Automobile and Mechanical

students participated

Designing and

fabricating

SAE SUPRA

vehicle)


BSAU 29

PROJECT BASED LEARNING

Programme: B.Tech Branch: Automobile Engineering Batch: 2014-18

Sem: IV Course Code & Name: AUB2212 -Mechanics of machinery

Course Faculty: Mr. D. Roshan / Assistant Professor

This course module has been chosen for project based learning. The students are

divided into nine batches with four members in each batch. Some of the projects are

shown below


BSAU 30

Title: Design and fabrication of power window mechanism of a car

Title: Design and fabrication of ornithopter using staggered crank mechanism

PROJECT BASED LEARNING

Programme: B.Tech Branch: Automobile Engineering Batch: 2013-17

Sem: IV Course Code & Name: AUB3101 – Two and Three wheelers

Course Faculty: Mr. V. Deepan/ Assistant Professor

This course module has been chosen for project based learning. The students are divided into six batches with six members in each batch. Some of the projects are shown below


BSAU 31

Title: Concept model of regenerating braking system for two wheelers

Title: Concept model of self balanced two wheelers

PEER ASSISTED LEARNING

Course Code & Name: AUX 017 Vehicle Dynamics

Peer learning Classes are conducted for the subjects AUX 017 Vehicle Dynamics on Every Monday from 21.09.15 (4.30 – 5.45 PM) 24 students are shortlisted to attend the class.. No students turned up for the class on 21.09.2015 & 28.09.2015. On counselling in the students 13 students attended the peer learning class on 5.10.15. students are given input about Basis of vibration; Terminologies related vibration units for mass, weight , distance, Velocity acceleration etc in peer learning classes.

Course Code & Name: GEB 1101 – Engineering Graphics

Peer learning Classes are conducted for the subjects GEB 1101 – Engineering Graphics on Every Monday & Tuesday from 22.09.2016 (9.00 -10.40 AM) and (4.50 to 6.30 PM) 20 students are shortlisted to attend the class. students are given input about Fundamental of EG and practice on tutorial problems.

24-01-2017

Department of Automobile Engineering, BSAU

32

LAB STAFF DEVELOPMENT

Automobile all lab staff training conducted by Dr. M. Subramanian ON 08.01.2016


BSAU 33


BSAU 34

Documents

DEPARTMENT OF AUTOMOBILE · PDF fileby held at Buddh International circuit, Greater Noida at New Delhi from 29th to 31st March 2016 Association of ... Department of Automobile Engineering,