Embed Size (px)
Citation preview
Demag crane sets
Tailored component sets for suspension and single and double-girder overhead travelling cranes
2
39429-3
Individual configurations and time-saving assembly – Demag crane sets tailored to meet specific needs
Demag crane sets are complete, tailored component packages for efficient suspension and single and double-girder overhead travelling crane solutions that save you time. They provide you with quality, efficiency and reliability at the highest level. Every component reflects
EPDE / EKDE suspension cranesThe alternative without columns for optimum utilisation of the available space
EKKE single-girder overhead travelling cranesMaximum stability for a low deadweight
EPKE single-girder overhead travelling cranesThe favourable solution for light loads and small crane spans
ZKKE double-girder overhead travelling cranesFor high load capacities and large spans
decades of Demag expertise in all aspects of crane design. Demag crane sets are based on standardised components for simple and user-friendly assembly on the plug-and-play principle.
3
39344-1
2
4
5
93 1 6 6
7
8
105
11
4
12
9 3
Energy chain system
Optimum match1 Crab or travelling hoist with drive2 Crane girder *3 Crane girder end plates4 End carriage 5 Travel drive6 Control pendant or radio control7 Crane electrical equipment8 Travelling hoist electrical equipment - with lifting limit switch - with load detector9 Clamp-fitted buffers10 C-rail assembly11 Power supply12 Hoist power supply
* not included in the crane set
4
40242-639559 38926-239472
39428-3
End carriages and travel unitsThe end carriages offer great stability thanks to their torsionally rigid, enclosed box-section profile with a reinforced connection plate and welded diaphragm plate. At the same time, they feature engineering tolerances in the connection to the crane girder.
The precise travel wheel arrangement and exact adjustment to the crane span dimension thanks to interchangeable spacer elements ensure optimum travel characteristics for minimum wear. Maintenance-free drives with anti-friction bearings lubricated for life and travel wheels made of spheroidal graphite cast iron provide for favourable travel characteristics.
Hoist unitThe Demag DR rope hoist with load capacities up to 50 tonnes offers high handling rates and efficiency. Its compact design with minimum approach dimensions and a large hook path facilitate optimum utilisation of the available space and height. Infinitely variable lifting and travel speeds ensure low-sway handling and gentle positioning, which provides for greater safety and more convenient operation.
Perfection in every detail – for maximum reliability in planning and assembly
5
39343-2
37371-1 39330-1 39211-1 39589-3
Power supplyThe Demag DCL compact conductor line for 4 to 7 poles and screw-type connections ensures long-term power supply and minimises unplanned downtime. The pre-assembled elements for simple assembly or replacement of current collector trolleys or complete straight sections provide optimum serviceability. IP 23 or IP 24 high protection against accidental contact with sealing lip and integrated expansion compensation ensure optimum safety.
ControlSafe, fatigue-free handling thanks to ergonomically designed control units. The crane can be controlled both by means of a suspended DLC control pendant that can travel separately on the crane as well as via the DRC radio control system. This is available as a hand-held transmitter with proportional pushbuttons and as a joystick transmitter. Both feature variable frequency radio operation for interference-free transmission and reception.
6
39349-2
37399
Easy planning and ordering –fast, simple and convenient
Partners from the very beginningDemag Cranes & Components is not only a strong partner for perfect technical solutions to meet your in-house logistics requirements. We also provide our partners and customers with support during the planning phase from the very beginning. You can use the fax form on the right for initial planning. On the basis of your fax enquiry, our sales engineers can make you an initial quotation or can contact you for any further specifications.
After you have logged into Crane Designer, you can select crane configurations online to meet your needs and order them direct. Quite simply and without any need for installation or hard disk space on your computer. Visit our virtual planning consultant at www.demag-cranedesigner.com.
Planners and plant designers can also be provided with our technical documents as conventional brochures or in electronic form on CD-ROM. This enables you to plan standard cranes using Demag crane sets precisely right from the start.
7
Crane type Suspension crane Single-girder overhead travelling
crane Double-girder overhead
travelling crane
Load capacity kg
Span m
Crane runway length m
Lifting height min. m
max. m
Control Cable-connected Radio-controlled
Demag Cranes & Components GmbH Crane Components Product Management (PCM 112) Ruhrstrasse 2858300 Wetter/Germany
Fax enquiry: +49 (0) 2335 92-2339
Please send the quote to:
Company
PO Box/street
Town/post code
Contact
Telephone/extension
Fax
Crane set project overview
Sketch of the building with dimensions, if available
Special features
8
Demag Cranes & Components GmbHRuhrstrasse 28 · 58300 Wetter/GermanyPhone: +49 (0) 2335 92-2922 Fax: +49 (0) 2335 92-2339Email: [email protected] 09
11 E
N/D
E
213
584
44
70
1 IS
10
0N
o lia
bilit
y fo
r er
rors
or
omis
sion
s. S
ubje
ct t
o ch
ange
. Pr
inte
d in
Ger
man
y S+
S/31
0112
/1T
