Upload
vprit
View
179
Download
0
Embed Size (px)
Citation preview
Page 1
Sub: Rate Contract for supply of Workstations Validity: From 20-DEC-10 To 30-NOV-11 .
Ref:(1) This Office Tender Enquiry No. WORKSTN/IT-1/RC-71040000/1111/81 Opened on 12-NOV-10. (2) Your Quotation No. And Dated .
Dear Sir,
You are hereby informed that your above refered tender read with subsequent letters mentioned above for the Stores specified in the Schedules annexed has been accepted. This rate contract will be governed by the terms and conditions brought in the Form no. DGS&D 1001 available from dgs&d sales counter on payment of Rs. 50/- .The Rate Contract and the schedules annexed here to shall be the sole repository of this Rate Contract/Transaction.
SCHEDULES ANNEXED
1.Schedule "A" Description of stores,prices,duties/taxes. 2.Schedule "B" special conditions of contract / Other information. 3.Schedule "C" Information to DDOs about parallel rate contracts. 4.Annexure - Technical Specification
Yours Faithfully,
( )
Assistant Director(S)/Section Officer/Dy.Director For and on behalf of the purchaser named in the Form DGS&D 1001.
Government of India Directorate General of Supplies & Disposals
Jeevan Tara Building, 5 Sansad Marg New Delhi - 110001
Rate Contract no. WORKSTN/IT-1/RC-71040000/1111/81/03680/3455Dated 20-DEC-10
Rate Contract
To,
AGMATEL INDIA PRIVATE LIMITED E-366, IInd Floor, Nirman Vihar, Vikas [email protected]; [email protected] New Delhi
Tel Number 23360610/23360537
1.Rate Contract No.:-WORKSTN/IT-1/RC-71040000/1111/81/03680/3455 Dated 20-DEC-10 For the Supply of Workstations
2.Advance Rate Contract No.:- Dated
3.(a) Name and Full Address of the Firm :-
---------------------------------------------------------------------------------------------------------------------------------------------Item Model Store Description Unit Rate No. No. (in Rs.) ---------------------------------------------------------------------------------------------------------------------------------------------
Configuration: Intel Xeon Dual Core Processor based.
Configuration: Intel Xeon Quad Core Processor Based
Configuration: Portable Intel dual core Processor Based
275000
180000
98184
Workstation
Workstation
Workstation
SCHEDULE - A
NOS.
NOS.
NOS.
1
2
3
DELL Precision T-7500
DELL Precision T-5500
DELL Precision M-4500
Rs. TWO LAKHS SEVENTY-FIVE THOUSANDONLY
Rs. ONE LAKHS EIGHTY THOUSAND ONLY
Rs. NINETY-EIGHT THOUSAND
AGMATEL INDIA PRIVATE LIMITEDE-366, IInd Floor, Nirman Vihar, Vikas [email protected] DelhiDELHI - 1100092Tel. No. - +91-11-43064306Fax - +91-11-22019833Email - [email protected]
(b) Name and Full Address of Manufacturer :-
Dell India Pvt. Ltd., Divyashree Greens, Ground Floor,No.12/1, 12/2A, 13/1A, Challaghaeta Village,Varthur Hobli, Bangalore-560271
(c) Brand: DELL
4.Validity of Rate Contract: 20-DEC-10 To 30-NOV-11
5.Description of Item, Specification,Unit, Rate
Page 3
Configuration: Intel Xeon W 3565 Processor Based
Items: Reduction for no Graphic Card for item no.1
Items: Reduction for no Graphic Card for item no.2
Items: Reduction for no Graphic Card for item no.4
Items: Additional 10/100/1000 Network Interface Card
Items: Price Reduction for no operating systems in the Workstation
Items: Norton Antivirus to support 32 bit OS(one year validity)
127000
-46800
-29250
-12376
846
-4576
1576
Workstation
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
4
8
9
11
13
14
15
DELL Precision T-3500
-Both the graphic cards
-
OEM
Microsoft
Symantec
ONE HUNDRED EIGHTY-FOUR ONLY
Rs. ONE LAKHS TWENTY-SEVEN THOUSANDONLY
(Minus) Rs. FORTY-SIXTHOUSANDEIGHT HUNDRED ONLY
(Minus) Rs. TWENTY-NINE THOUSANDTWO HUNDRED FIFTY ONLY
(Minus) Rs. TWELVE THOUSANDTHREE HUNDRED SEVENTY-SIX ONLY
Rs. EIGHT HUNDRED FORTY-SIXONLY
(Minus) Rs. FOUR THOUSANDFIVE
FIVE
HUNDRED
HUNDRED
SEVENTY-
SEVENTY-
SIX ONLY
SIX ONLY
Rs. ONE THOUSAND
Page 4
Items: Mcafee to support 32 bit OS (one year validity)
Items: etrust to support 32 bit OS (one year validity)
Items: N-vidia Quadro FX 4800,(1.5GB)
Items: N-vidia Quadro FX 5800,(4GB)
Items: 1000 GB Hard Disk
Items: 2 GB RAM frequency as per main item
Items: 4 GB RAM frequency as per main item
1545
1250
92300
184000
8219
3950
13429
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
16
17
18
19
20
21
22
Mcafee
etrust
N-vidia
N-vidia
OEM
OEM
OEM
FIVE HUNDRED SEVENTY-SIX ONLY
Rs. ONE THOUSANDFIVE HUNDRED FORTY-
TWENTY
FIVE ONLY
NINE ONLY
Rs. ONE THOUSANDTWO HUNDRED FIFTY ONLY
Rs. NINETY-TWO THOUSANDTHREE HUNDRED ONLY
Rs. ONE LAKHS EIGHTY-FOUR THOUSANDONLY
Rs. EIGHT THOUSANDTWO HUNDRED NINETEEN ONLY
Rs. THREE THOUSANDNINE HUNDRED FIFTY ONLY
Rs. THIRTEEN THOUSANDFOUR
Page 5
Items: AutoCAD 2010 Commercial NEW SLM (Stand Alone) software.
120491Add on items for Workstations
NOS.23 AutoCAD 2011 Rs. ONE
LAKHS
Items: AutoCAD 2010 Commercial NEW NLM (Network) software.
Items: AutoCAD 2010 Commercial Subscription (Valid For 1 year).
Items: N-vidia Quadro FX 1800,(768MB)
Items: N-vidia Quadro FX 3800,(1GB)
Items: Quick Heal CSE Anti VIrus Plus (CSEAV+)
138565
14513
25750
44370
44370
1700
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
Add on items for Workstations
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
24
25
26
27
28
AutoCAD 2011
AutoCAD 2011
N-vidia
N-vidia
Quick Heal
TWENTY THOUSAND FOUR HUNDRED NINETY-ONE ONLY
Rs. ONE LAKHS THIRTY-EIGHT THOUSANDFIVE HUNDRED SIXTY-FIVE ONLY
Rs. FOURTEENTHOUSANDFIVE HUNDRED THIRTEEN ONLY
Rs. TWENTY-
FIVE THOUSANDSEVEN HUNDRED
HUNDRED
FIFTY ONLY
ONLY
Rs. FORTY-FOUR THOUSANDTHREE HUNDRED SEVENTY ONLY
Rs. ONE THOUSANDSEVEN
Items: TFT Monitor large formate display ,(1366x768) 81.3cm/32"
126500Add on items for Workstations
NOS.32 Samsung 400 MXN2 TFT
Rs. ONE LAKHS TWENTY SIXTHOUSANDFIVE HUNDRED ONLY
Page 6
18-Paying Authority: The Chief Controller of Accounts, Deptt. of Supply16A, AKBAR ROADNew Delhi -110011
19-Inspection Authority:
20-Quality Assurance Officer:
21-Place where the Stores are to be Tendered for Inspection:
At firm's premises at Bangalore.
22-R/C is DDOs Operated:
8 to 10 weeks from the date of receipt of technically & commercially clear order along with Financial Certificate, Waybill/Road Permit/Octroi Exemption Certificate and CDE Certificate wherever applicable.
10(a)-Annual Turnover:
13-Prices:
14-Quantity Offered:
15-Minimum Quantity in Single Supply Order:
17-Status of the RC Holding Firm:
As per Schedule-B 6-Terms of Delivery:
7-Excise Duty: N.A.
8-Sales Tax: CST/VAT extra @ 5%. Service Tax @10.3% extra on item No.25 only.
11-Payment Terms: As per Schedule-B
9-Delivery Period:
For CivilADG(QA),Jeevan Tara Building,Parliament StreetNew Delhi
For CivilDirector Quality Assurance,Kendrya Sadan,17 th Main Road, Second Block,KoramangalaBangaloreKARNATAKA -560034
16-Minimum order Value in Single Supply Order:
12-Slab Discount Clause: NIL
Without limit
FIXED
One
N.A.
No Limit
LSI
Yes
(b)-Monetary Limit: Without Any Limit
( ) Asstt. Director (S) / Section Officer / Dy. Director For and behalf of the purchaser named in the Form DGS&D 1001.
All the R/C particulars including prices in respect of individual R/Cs are available on DGS&D website which can be accessed by all.The DGS&D website is http://dgsnd.gov.in
23-Packing & Specification :
With effect from First October two thousand eight ( 01-10-2008 ),all supply order(s) against this Rate Contract must be placed by Direct Demanding Officer(s) on-line through D.G.S&D web site (www.dgsnd.gov.in) (indentor's page) only. Supply order(s) in any other form placed on or after 01-10-2008 shall not be valid and shall not be acted upon by the contractor or any other concerned agencies.
DDO shall download the supply order and send an ink signed copy to the concerned paying authority specified in the rate contract through Registered / speed post immediately after on-line placement of Supply Order(s).
see annexure
Page 7
SCHEDULE - B
RC Specification:Schedule- B
Special Conditions of Contract:
1. Insurance: As per DGS&D standard transit insurance clause, it will be responsibility of supplier for safe arrival of stores in full and good conditions at user's point and purchaser will not pay separately for transit insurance clause.
2. Warranty Terms: Prices to include supply and commissioning at site and Comprehensive warranty for a period of 36 months from the date of commissioning except for anti -virus softwares and the battery for item No.4 which the warranty shall be one year from delivery. For this purpose, the workstation shall be delivered by the consignee at the nearest service enter of the firm andcollect back after satisfactory repairs. Any component required to be replaced within the warranty period will be a totally new component and not reconditioned or repaired component.
3. Payment terms :98% payment would be payable against proof of inspection and provisional consignee receipt certificate issued by consignee for having received the stores on said to contain basis. The balance 2% after successful demonstration and acceptance of stores by consignee in good condition and on submission of Bank Guarantee for balance 2% value of order valid till 2 months beyond the warranty period of 3 years indemnifying the purchaser against all losses incurred by the purchase during the guarantee/warranty.
4. No assistance for import of finished product or raw material will be provided.
5. `NIL' against Octroi Exemption Certificate to be provided by the indentor along with order otherwise extra, if applicable.
6. Octroi Duty and Local Taxes:
Normally materials to be supplied to Govt. Department against Govt. contracts are exempted from levy of town duty, Octroi duty, terminal tax and other levies of local bodies. The local Town/Municipal Body regulations at times, however, provide for suchexemption only on production of such exemption certificate from any authorized officer. Contractors should ensure that stores ordered against contracts placed by this office are exempted from levy of town duty/Octroi duty, Terminal tax or other local taxes and duties. Wherever required, they should obtain the exemption certificate from the purchase officer or indentor concerned, to avoid payment of such local taxes or duties. Octroi, entry tax etc. on buyers account in absence of relevant exemption certificate.
7. Supply of Road Permits/ Way bill by the indentor/consignees:
In all such cases where the requirement of Road Permit/Way Bills for entry of goods into a particular State is mandatory, the following provisions shall be strictly followed: -.
(a) The supplier shall request the indentor/consignee for providing Road permit/ Way bill within 10 days of the receipt of the Supply order. The supplier shall furnish all the necessary information and documents in this regard to Indentor/consignee.
(b) On receipt of the above request from the supplier, the indentor/consignee concerned shall arrange to provide the Road permit/Way Bill in the prescribed form to the supplier within a maximum period of two weeks so that the same reaches the supplierbefore the dispatch of the stores. However, in cases where the Road permit/Way Bill is issued on proof of actual invoice of the material, the consignee shall arrange to provide the Road permit/Way Bill from appropriate authorities within a maximum period of 5 days from the receipt of invoice.
(c) The supplier shall not be held responsible for any delay in supply due to non- supply/delayed supply of Road permit/Way bill by the indentor/consignee.
(d) All cases of abnormal delay in providing requisite details/ documents by the supplier or issue of Road permit/Way bill by indentor/consignee, the same shall be reported to DGS&D.
The details of the Road permits presently applicable in different States are as under:-Sr.No. States Road Permit1 Andhra Pradesh: -2 Arunachal Pradesh: Form DG-013 Assam: Form 624 Bihar:Form 285 Chhattisgarh: Form 59A6 Goa: -7 Gujarat: Form 4038 Haryana:Form 38 if value is Rs. 25,000 or more.
Page 8
11 Jharkhand: Form 28B12 Karnataka: -13 Kerala: -14 Madhya Pradesh: Form 88/8915 Maharashtra: -16 Manipur: Form 2717 Meghalaya: Form 1418 Mizoram: Form 3319 Nagaland : Form 1620 Orissa: Form 2821 Punjab: -22 Rajashthan: Form 1823 Sikkam: Form 2024 Tamil Nadu: -25 Tripura: Form 2626 Uttar Pradesh: Form 3227 Uttaranchal: Form 1728 West Bengal: Form 50
8. Signing of Inspection Notes issued by QA Wing of DGS&D : Instructions to Indentors/Consignees.
Advance Payment Copy of Inspection Note for claiming 98% payment (copy No.1):
This is a provisional receipt. It only be tokens the receipt of stores by the consignee and is without prejudice to his rights of inspection and rejection under the general condition to contact. It is issued on said to contain basis the Contractor remaining responsible for proving the total quantities actually delivered. Consignee mentioned in the Inspection Notes should sign (in INK) & put his official rubber stamp on the Advance Payment Copy of Inspection Notes IMMEDIATELY on the receipt of the material and handover the same to the company's authorized representative. Where this is not possible or inconvenient, it should be signed (in INK) by an official authorized by the consignee in that behalf. In such cases, the official signing the receipt certificate should indicate his designation and the official on whose behalf he is signing; and put his official rubber stamp.
Balance payment & Accounts Copy of Inspection Note (Copy no 2& 5) for claiming 2% balance payment.
Within 90 days from the date of material received, Consignee mentioned in the Inspection Notes should sign (in INK) & put his official rubber stamp on the Balance & Accounts office copy of Inspection Notes and should fill up the columns of Receipt Voucher No.
In cases where the supply is incomplete or defective or the supplier do not carry out commissioning/demonstration of the stores within the period as per (i) above, the consignee shall report such cases immediately to the supplier and DGS&D.
In cases where the consignees do not release copy 2 and 5 of I/Notes within the period as (i) above for the reasons which are considered not valid by the supplier, they may approach DGS&D with complete details for authorization of balance payment without copy 2 and 5 of I/Notes and the same shall be considered by DGS&D on merits of each case.
9 Himachal Pradesh: -10 Jammu & Kashmir: -
9. Environmental Test Report will be submitted at the time of Inspection.10. End User: Declaration to be provided from the Indenter placing orders against rate contract.11. There shall be mid term review of specifications and prices against the R/C.
Schedule -DSpecial Instructions to R/C holders:
Rate contract holders are advised that before entertaining the supply order, they should ensure the availability of following certificates from DDO's.
a) That they are Central Government Department drawing funds from consolidated fund of India.b) The expenditure involved for the purchase has received the sanction of the competent financial authority.c) The funds are available under the proper head in the sanctioned budget allotment for the year.d) They have been fully authorized by the department to sign the supply order and incur the liability in respect of stores being ordered.
( B.S. Khati )ASSISTANT DIRECTOR (S) For and on behalf of the purchasers named in the Schedule/Form DGS&D-1001
Page 9
1. Type tests shall consists of verification of all the features & functional requirements including environmental tests. The environmental tests sequence
will be as under :
(a) Dry Heat Test : For 16 hrs. at a temp. of 45 degree C in with IS:9000/part-3/section-5/1977.accordance
(b) Cold Test : For 4 hrs. at a temp. of 0 degree C in accordance with IS:9000/part-2/section-4/1977.
(c) Damp Heat Cyclic Test : For 2 Cycles of 24 hrs at temp. of 40 deg. C & 95%
in accordance with IS:9000/part-5/section-RH 2/1981
The workstation shall be checked before and after the above environmental tests sequence for satisfactory functional requirements after a recovery
period of 1 to 2 hours.
2. Atleast four certifications for the applications from the list enclosed at Annexure 'A' should be listed on the website of independent software vendor
(ISV). The hard copy of the same shall be submitted along with the offer.
ANNEXURE `A'
"List Of Software Application For Workstation Certification"
(a) DIGITAL CONTENT CREATION (DCC)
1. Adobe After Effects, Premiere, Photoshop, Illustrator, Encore DVD, Live Motion. 2. Alias Maya Unlimited, Maya Complete, Studio Tools, Portfolio Wall. 3. Avid Adrenaline, Mojo, Nitris, Media Composer, Symphony, Xpress, Xpress Xpress Studio, Avid (DS, Avid DS) HD.DV, 4. Discreet 3dsmax, combustion, cleaner XL. 5. Metrox Video Products Group InfonetTV, RT.X100, DigiSuite DTV MAX, DigiSuite LE, DigiSuite LX
(b) ELECTRONIC DESIGN AUTOMATION (EDA)
1. Cadence Allegro, Assura, NC-SIM, NC-Verilog, Qplace, Spectre, SPECCTRA,
Virtuoso 2. Mentor Graphic Boardstation, Caliber, HDL, ICX, ModelSim, 3. Synopsys Galaxy Design Platform-Design Compiler, JupiterXT, Floorplan Compiler, Physical Compiler, Astro, Star-RCXT, Hercules and Proteus 4. Magma Automation
(c) GEOGRAPHIC INFORMATION SYSTEMS (GIS)
1. ERDAS Imagine 2. ESRI Arclnfo and Arc View
(d) MECHANICAL COMPUTER AIDED DESIGN (MCAD)
ANNEXURE
1. Ansys : ANSYS, ANSYS Workbench, ANSYS DesignSpace 2. Bentley : Microsystems Microstation. 3. Dassault Systemes : CATIA, DELMIA, ENOVIA, Smarteam, ACIS. 4. UGS : UG NX, I-ideas NX, Solid Edge, NX Nastran, Femap, Parasolid, Teamcenter Visualization, Teamcenter Manufacturing,Teamcenter Community.
5. PTC : Pro/ENGINEER WILDFIRE, Pro/MECHANICA, CADDS 5i.
(e) MECHANICAL COMPUTER AIDED ENGINEERING (MCAE)
1. ABAQUS : ABAQUS Std/Exp 2. ACUSIM : AcuSolve
Page 10
3. ADINA : R&D Adina, ADINA user interface 4. Altair Engineering : HyperMesh, Optistruct 5. ANSYS : ICEM-CFD; ANSYS user interface,ANSYS, CFX-5, TASCflow 6. Computational Engineering : EnSight
7. Fluent : FLUENT 8. Livermore Software : LS-PrePost, LS-DYNA. Technology Corp.
(f) ELECTRONIC DESIGN AUTOMATION (EDA)
1. Cadence Allegro, Assura, NC-SIM, NC-Verilog, Qplace, Spectre, SPECCTRA, Virtuoso. 2. Mentor Graphic Boardstation, Caliber, HDL, ICX, ModelSim, 3. Synopsys Galaxy Design Platform-Design Compiler, JupiterXT, Floorplan Compiler, Physical Compiler, Astro, Star-RCXT, Hercules and Proteus 4. Magma Automation
(g) GEOGRAPHIC INFORMATION SYSTEMS (GIS)
1. ERDAS Imagine 2. ESRI Arclnfo and Arc View
(h) MECHANICAL COMPUTER AIDED DESIGN (MCAD)
1. Ansys : ANSYS, ANSYS Workbench, ANSYS DesignSpace 2. Bentley : Microsystems Microstation 3. Dassault Systemes : CATIA, DELMIA, ENOVIA, Smarteam, ACIS 4. UGS : UG NX, I-ideas NX, Solid Edge, NX Nastran, Femap, Parasolid, Teamcenter Visualization, Teamcenter Manufacturing,Teamcenter Community.
5. PTC : Pro/ENGINEER WILDFIRE, Pro/MECHANICA, CADDS 5i.
(i) MECHANICAL COMPUTER AIDED ENGINEERING (MCAE)
1. ABAQUS : ABAQUS Std/Exp 2. ACUSIM : AcuSolve 3. ADINA : R&D Adina, ADINA user interface 4. Altair Engineering : HyperMesh, Optistruct 5. ANSYS : ICEM-CFD; ANSYS user interface, ANSYS, CFX-5, TASCflow 6. Computational Engineering : EnSight
International
International
7. Fluent : FLUENT 8. Livermore Software : LS-PrePost, LS-DYNA. Technology Corp.
In lieu items for Workstations
WorkstationSpecification :3
(A) Workstation Dual Intel Xeon Processor Based
Workstation Dual Intel Xeon Processor Based for Advanced Visualization & Virtual Reality Application -
1. CPU : 2 x CPU Intel HEX(6) Core Xeon X 5660, 2.8GHz, 12 MB L3 cache, 6.4 GTPS Qpi2. Chipset and Motherboard : Intel 5520 chipset on OEM Motherboard.3. Memory : 4 GB DDR3 1333 MHz expandable to 48 GB.
4. Hard Disk Drive : 1 x 1000 GB SATA 7200 RPM drive up gradable to 3HD5. Storage Controller : SATA Controller with RAID support 0 and 1.6. Graphic Card : 2 x Nvidia Quadro 4000 PCI Express (2 GB) or higher or ATI Firegl V7800(2 GB).
Page 11
7. Keyboard : Standard Keyboard8. Mouse : Optical Scroll Mouse9. PCI Slots : 5 PCI/PCI Express including 2 PCI Express x 16 for Dual graphics.10. Bays : Total 4 bays (2 Internal, 2 External)11. Ports : 5 USB 2.0 Ports12. Cabinet : Mini Tower13. Optical Drive : 8 x DVD writer.14. Networking features : Integrated 10 / 100 / 100015. Operating System : Microsoft Windows 7 Professional Preloaded(OEM Pack) 16. OS Certifications : Windows 7 Logo and red Hat or Suse Linux17. Application Certification: ISV certified for Applications from the Digital Content Creation (DCC) and Electronic Design Automation (EDA)and Mechnical Computer Aided Design(MCAD).18. Safety Certification : FCC for EMI and UL for safety.19. Power supply : 230 V +/- 10% single phase, 50 Hz AC.20. Power Management : ACPI (Advanced Configuration and Power Management Interface).21. Bundle Software : System Health Monitoring Tool available with Workstation22. Security : Integrated panel lock or pad lock.
(B) WORKSTATION INTEL XEON QUAD CORE PROCESSOR BASED.
Workstation Quad Core Intel Xeon Processor Based For Computer Aided Engineering:
1. CPU : Intel Xeon E 5630, 2.53 GHz, 12 MB L3 cache, 5.86 QpiGTPS, 2. Chip set and Motherboard : Intel E 5520 chipset on Intel/OEM Motherboard3. Memory : 4 GB DDR3 1333 MHz, expandable to 48 GB,4. Hard Disk Drive : 1000 GB SATA HDD at 7200 rpm upgradeable to 2 HDD.5. Storage Controller : SATA Controller RAID 0, 1 .
6. Graphic Card : NVIDIA Quadro FX 1800 or ATI Firepro V4800(1GB) or higher.7. Keyboard : Standard Keyboard8. Mouse : Optical Scroll Mouse9. PCI Slots : 4 PCI/PCI Express including 1 PCI Express X 1610. Bays : Total 4 Bays (2 internal, 2 external)11. Ports : 6 USB 2.0,RJ-45, audio in,audio out, mic in12. Cabinet : Mini tower13. Optical Drive : 8 X DVD writer.14. Networking features : Integrated 10/100/100015. Operating System : Microsoft Windows 7 Professional Preloaded(OEM Pack) 16. OS Certifications : Windows 7 Logo and Red Hat or Suse Linux17. Application : At least four ISV certifications for Applications Certification from the following categories (Minimum one ISV certification from each category) as per lists enclosed at Annexure `A'
(a) Digital Content Creation(DCC) (b) Electronic Design Automation (EDA) (c) Mechanical Computer Aided Design (MCAD). The Certification should be listed on the website of Independent Software Vendor (ISV). The Hardcopy of same shall be submitted with the technical bid
18. Safety Certification : FCC for EMI and UL for Safety19. Power Supply : 230V +/- 10% single phase, 50 Hz AC20. Power Management : ACPI (Advanced Configuration and Power Management Interface)21. Bundle Software : System Health monitoring Tool available with H/W box
22. Security : Integrated panel lock or pad lock.
Page 12
(c) WORKSTATION PORTABLE INTEL DUAL CORE PROCESSOR BASED
Workstation Portable Intel dual Core Processor Based for CAD/CAM/CAE & GIS app.:
1. CPU : Intel Core i5-520M, 2.4 GHz, 3 MB L3 cache.2. Chip set and Motherboard : Mobile Intel PM 55 Chipset with 1066 MHz FSB on Intel or OEM motherboard.3. Memory : 4 GB DDR3, 1066 MHz4. Hard Disk Drive : 250 GB 5400 rpm HDD5. Screen : 38.7cm (15.4 inches) wide WSXGA Screen6. Graphic Card : ATI Mobility FireGL V5700 with 512 MB Video Memory
or NVIDIA Quadro FX 880 M with 1GB memory or higher.
7. Keyboard : Standard Keyboard and optical mouse8. Ports : 1-VGA, 1-RJ11, 1-RJ45, 1-S-video TV out, 3-USB 2.0 ports, 1-Docking Connector,1-Travel Battery Connector. 9. Optical Drive : 8 X DVD writer10. Networking features : Gigabit NIC10/100/1000 and Intel Pro 500,802.11 Agh wireless Card11. Operating System : Windows Vista Business (32 Bit)/Windows 7 (32 bit) 12. OS Certifications : Windows Vista Logo and Red Hat or Suse Linux
13. Application Certification: The Workstation should be certified for PTC-Pro, ESRI Arcinfo, solid works AutoDesk, Autocad and Avid Express and certification should be listed on the respective Website. Hardcopy of same shall be submitted with the technical bid.14. Safety Certification : FCC for EMI and UL for Safety15. Power Supply : 230V+/-10% , 50 Hz AC Supply with rechargeable pack comprising of Li-Ion Batteries suitable battery 4 hours operation complete with battery For approx.
charger/adaptor.
(D) WORK STATION INTEL XEON X 3565 PROCESSOR BASED
Workstation Intel Xeon X 3565 Processor for computer Aided Design& GIS app.:
1. CPU : Intel Xeon W 3565 processor, 3.2 GHz, 8 MB L3
Cache 4.8 GTPS Qpi.2. Chipset & Motherboard : Intel X 58 chipset on Intel/OEM Motherboard3. Memory : 4 GB DDR3 ECC(1066 MHz) expandable upto 12 GB.4. Hard Disk Drive : 500 GB SATA 7200 rpm UPGRADEABLE TO 3 HDD.5. Storage Controller : SATA Controller with RAID card 0,16. Graphic Card : NVIDIA Quadro FX 1800 or ATI Firepro V4800(1GB) or higher.7. Keyboard : Standard Keyboard8. Mouse : Optical Scroll Mouse9. PCI Slots : 5 PCI/PCI Express including 1 PCI Express x 16 for
graphics10. Bays : Total 4 Bays with minimum 2 internal and 1 external 11. Ports : 7 USB 2.0,parallel port, RJ-45,audio in,audio out, mic in.12. Cabinet : Mini tower13. Optical Drive : 8 X DVD writer.14. Networking features : Integrated 10/100/100015. Operating System : Microsoft Windows Vista Business (64 bit)/ Windows 7 (64 bit)16. OS Certifications : Windows Vista Logo and Red Hat or Suse Linux
17. Application Certification: At least four ISV certifications for Applications from the following categories(Minimum one ISV certification from each category) as per list enclosed at Annexure `A.
(a) Digital Content Creation(DCC) (b) Electronic Design Automation (EDA)
Page 13
(c) Mechanical Computer Aided Design (MCAD) . The Certification should be listed on the website of Independent Software Vendor (ISV). The hardcopy of same shall be submitted with the technical bid 18. Safety Certification : FCC for EMI and UL for Safety19. Power Supply : 230V +/- 10% single phase, 50 Hz AC20. Power Management : ACPI(Advanced configuration and Power Management Interface)21. Bundle Software : System Health monitoring Tool available with H/W box 22. Security : Integrated panel lock or pad lock.
(E) WORK STATION INTEL XEON X 3450 PROCESSOR BASED
Workstation Intel Xeon X 3450 Processor Based for Scientific Programming & Multimedia Application -
1. CPU : Intel Xeon X 3450 processor, 2.66 GHz, 8 MB L3 Cache
2. Chipset & Motherboard : Intel X 3450 chipset on Intel/OEM Motherboard3. Memory : 2 GB (2x1GB) DDR3 (1066 MHz) expandable upto 16 GB 4. Hard Disk Drive : 250 GB SATA II 3.0 GB/s 7200 rpm drive5. Storage Controller : Integrated 4 channel Serial ATA controller with RAID 0, 1, 5 and combination of 1& 0 functionality.6. Graphic Card : Professional 3 D Graphic card NVIDIA FX 380 or ATI FirePro V 3700.7. Keyboard : Standard Keyboard8. Mouse : Optical Scroll Mouse9. PCI Slots : 4 PCI/PCI Express including 1 PCI Express x 1610. Bays : Total 4 Bays with minimum 2 internal and 1 external 11. Ports : 6 USB 2.0, RJ-45,audio in, audio out, mic in.12. Cabinet : Mini tower13. Optical Drive : 8 X DVD writer.14. Networking features : Integrated 10/100/100015. Operating System : Microsoft Windows Vista Business (64 bit)/ Windows 7 (64 bit)16. OS Certifications : Windows Vista Logo and Red Hat or Suse Linux17. Application Certification: At least four ISV certifications for Applications from the following categories(Minimum one ISV certification from each category) as per list enclosed at Annexure `A. (a) Digital Content Creation(DCC) (b) Electronic Design Automation (EDA) (c) Mechanical Computer Aided Design (MCAD) . The Certification should be listed on the website of Independent Software Vendor (ISV). The Hardcopy of same shall be submitted with the technical bid 18. Safety Certification : FCC for EMI and UL for Safety19. Power Supply : 230V +/- 10% single phase, 50 Hz AC20. Power Management : ACPI(Advanced configuration and Power Management Interface)21. Bundle Software : System Health monitoring Tool available with H/W box 22. Security : Integrated panel lock or pad lock.
Add on items for Workstations
Specification :-(I) TFT Monitor High resolution Graphics (1680x1050) 53.3 cm/ 21 inches)
A. Type : Wide-Aspect Active Matrix (thin film transistor) TFT.B. Viewable Image Area (Diagonal): 53.3 cm (21 inches).C. Viewing Angle : 178° horizontal/178° vertical (10:1 minimum contrast ratio).D. Brightness : 300 nits (cd/m2).E. Contrast Ratio : 1000:1.
Page 14
F. Pixel Pitch : 0.282 mm.G. Colour Depth Support : 16.7 million colors.H. Signal Input : 1DVI-I connector,1 Display Port connector, HDCP support.I. Response Rate : <6 ms (gray to gray), 16 ms (on/off).J. Cable Management & mounting : Rubberised cable management ducts on the stand and Quick Release kit.K. Accessories included : 1DVI cable, 1DVI-I to VGA cable, 1 Display Port cable, 1 USB cable, 1 power cable.L. Software included : Display Assistant Software, Pivot Pro software and Display Lite Saver software.
(II) TFT Monitor High resolution Graphics (1920x1200), 60.9 cm /(24 inches)
A. Type : Wide-Aspect Active Matrix (thin film transistor) TFT.B. Viewable Image Area (Diagonal): 60.9 cm (24 inches).C. Viewing Angle : 178° horizontal/178° vertical (10:1 minimum contrast ratio).D. Brightness : 400 nits (cd/m2).E. Contrast Ratio : 1000:1.F. Pixel Pitch : 0.270 mm.G. Colour Depth Support : 16.7 million colors.H. Signal Input : 2DVI-I, 1HDMI, 1Display Port, 1Component Video, 1 S -Video, and 1 Composite Video.I. Response rate : 6 ms (gray to gray); 12 ms (on/off).J. Cable Management and mounting : Rubberised cable management ducts on the stand and Quick Release kit.K. Accessories included : DVI-I to VGA cable, DVI-D, HDMI, Display Port, USB cable, power cable.L. Software included : Display Assistant Software, Pivot Pro software and Display Lite Saver software.
(III)TFT Monitor Large Format Display (1366x768) 81.3cm /(32 inches)A. Diagonal Size : 81.3cm (32 inches)B. Type : S-PVAC. Resolution : 1366 x 768D. Pixel Pitch : 0.511(H) x 0.511(W)E. Brightness(Typical) : 450cd/m2F. Contrast Ratio : 4000:1G. Dyamic C/R : 40000:1H. Viewing Angle H/V : 178/178I. Response Time(G-to G) : 8msJ. Colour Space : 72%K. PC Input : VGA/DVI/PC(Support SOG)L. Video Input : CVBS/HDMIM. Bazel Width : 42 mm or LowerN. Speaker : 5 W x 2O. VESA Mount : 200 mm x 200 mmP. Humidity : 10~80%Q. Temp. normal : 10degree C ~ 40 degree CR. Operating System : Window XP EmbeddedS. CPU : Athlon X2 Dual Core 4450e(2.3Ghz.)T. FDM : 4GBU. Memory : 1GB DDR2V. Ethernet : Gigabit LANW. USB : 3 USBX. Features : Network System Information, Asset ManagementY. Remote Control : Yes
(IV) TFT Monitor Large Format Display (1920x1080), 116.8cm/ (46 inches)
A. Diagonal Size : 116.8cm/46"
Page 15
B. Type : To be given by firmC. Resolution : To be given by firmD. Pixel Pitch : To be given by firmE. Brightness(Typical.) : To be given by firmF. Contrast Ratio : 4000:1G. Dyamic C/R : 40000:1H. Viewing Angle H/V : 178/178I. Response Time(G - to G) : 8msJ. Colour Space : 72%K. PC Input : VGA/DVI/PC(Support SOG)L. Video Input : CVBS/HDMIM. Bazel Width : 42mm or LowerN. Speaker : 10W x 2O. VESA Mount : 600 mm x 400 mmP. Humidity : 10~80%Q. Temp. normal : 10degree C ~ 40 degree CR. Operating System : Window XP EmbeddedS. CPU : Athlon X2 Dual Core 4450e(2.3Ghz.)T. FDM : 4GBU. Memory : 1GB DDR2V. Ethernet : Gigabit LANW. USB : 3 USBX. Features : Network System Information, Asset ManagementY. Remote Control : Yes
Page 16
In lieu items for WorkstationsItem:
Item to be supplied: Windows 7 Professional 32 bit,In lieu of:
Windows 7 Professional 64 bit
Rs. 0
Item Description Revised Rate
Government of India Directorate General of Supplies & Disposals
Jeevan Tara Building, 5 Sansad Marg New Delhi-110001
Tel Number 23360610/23360537
Amendment No. WORKSTN/IT-1/RC-71040000/1111/81/03680/3455/34144
Dated: 21-DEC-10
Effective Date: 21-DEC-10
To
M/S AGMATEL INDIA PRIVATE LIMITEDE-366, IInd Floor, Nirman Vihar, Vikas Marg
New Delhi
DELHI-1100092.
Sub : This office R/C No. WORKSTN/IT-1/RC-71040000/1111/81/03680/3455 Dated 20-DEC-10 for the Supply of Workstations.
Ref : Your Letter No. Nil Dated 21-DEC-10.
Dear Sir,
The following amendments to the schedule to subject rate contract in terms of rate are hereby authorised:-
35 NOS.
All other terms and conditions of the R/C Shall remain unaltered.Please ack. receipt.
NOTE:-Item No.35 will be supplied free of cost.
UNDER SCHEDULE-A
Rs. ZERO ONLY
Yours faithfully,
(Section Officer/A.D./D.D.) For & on behalf of Purchaser named in DGS&D-1001
With effect from First October Two thousand eight ( 01-10-2008), all Supply Order(s) against this Rate
Contract must be placed by Direct Demanding Officer(s) on-line through D.G.S.&.D. web site
(www.dgsnd.gov.in) (indentor's page) only. Supply order(s) in any other form placed on or after 01-10-2008
shall not be valid and shall not be acted upon by the contractor or any other concerned agencies.
DDO shall download the Supply order and send an ink signed copy to the concerned paying authority
specified in the Rate Contract through Registered / Speed post immediately after on-line placement of
Supply Order(s).
Page 17
Government of India Directorate General of Supplies & Disposals
Jeevan Tara Building, 5 Sansad Marg New Delhi-110001
Tel Number 23360610/23360537
Amendment No. WORKSTN/IT-1/RC-71040000/1111/81/03680/3455/34269 Dated: 27-DEC-10Effective Date: 20-DEC-10
ToM/S AGMATEL INDIA PRIVATE LIMITEDE-366, IInd Floor, Nirman Vihar, Vikas MargNew DelhiDELHI-1100092.
Sub : This office R/C No. WORKSTN/IT-1/RC-71040000/1111/81/03680/3455 Dated 20-DEC-10 for the Supply of Workstations.
Ref : Your Letter No. Nil Dated 27-DEC-10.
Dear Sir,
The following amendments to the schedule to subject rate contract in terms of rate are hereby authorised:-
Against Clause - 2 i.e. Warranty Terms of Schedule-B of the rate contract.
FOR: Item No.4READ: Item No.3
Other Clause :
All other terms and conditions of the R/C Shall remain unaltered.Please ack. receipt.
UNDER SCHEDULE-A
Yours faithfully,
(Section Officer/A.D./D.D.) For & on behalf of Purchaser named in DGS&D-1001
With effect from First October Two thousand eight ( 01-10-2008), all Supply Order(s) against this Rate
Contract must be placed by Direct Demanding Officer(s) on-line through D.G.S.&.D. web site
(www.dgsnd.gov.in) (indentor's page) only. Supply order(s) in any other form placed on or after 01-10-2008
shall not be valid and shall not be acted upon by the contractor or any other concerned agencies.
DDO shall download the Supply order and send an ink signed copy to the concerned paying authority
specified in the Rate Contract through Registered / Speed post immediately after on-line placement of
Supply Order(s).
Page 18