Delivery Program

chemical and mineralprocess equipmentB.V.

2

About Us

Out of the TEMA Holding N.V., for the purpose

of establishing a worldwide sales organization,

which is responsible selling the products of the

group, TEMA B.V. was established on the 12th

March 1981.

TEMA B.V. is responsible for the sales of those

products which are manufactured within

our group and also of some complementary

products which are produced outside our

group of companies.

TEMA B.V. is responsible for the following

countries and continents:

The Netherlands, Belgium (Flanders), the

biggest part of Asia, Middle East, Latin America.

SeParation

that

binDS.

TEMA B.V. is specialized in machines and

systems for the processing of basic materials

in the minerals-, chemicals-, food-, dairy- and

pharmaceutical industry and offers machines &

systems for separation of solids & liquids, for

classification as well as crushing and pulverizing

of several raw materials.

In the meantime TEMA B.V. has established

a sound network of local agents and also

opened an office in PR of CHINA (TEMA Beijing

Representative Office) to provide optimal

service to our customers.

3

Some of the products we process

Salt

EPS

Lactose

Gravel

Woodchips

Coal

4

Centrifuges

TEMA / SIEBTECHNIK

CONTURBEX Centrifuge

The most versatile of our centrifuges is the

worm/screen centrifuge. Products such as

crystals, granulates or fibres but especially

salt crystals and fertilizers will be successfully

separated.

TEMA / SIEBTECHNIK

Pusher Centrifuge

Pusher centrifuges in single-, double- or

triple-step execution with cylindrical/conical

screen basket are especially selected when

low loss of solids, good washing or low mois-

ture are required.

TEMA / SIEBTECHNIK

CONTHICK Centrifuge

The design of this centrifuge is based on the

technology of our CONTURBEX worm/screen

centrifuge with additional pre-thickening unit

for high efficiency seperation of low solids

concentration slurry as well as high recovery

of solids.

5

Centrifuges

TEMA / SIEBTECHNIK

DECANTER Centrifuge

The solid bowl decanter centrifuge is used to

separate fine crystals and fine powder from

slurry. Also most of the industrial waste wa-

ter streams can be thickened with the solid

bowl decanter.

For special performance also TWIN-CONE

and TURBO-SCREEN decanters are available.

TEMA / SIEBTECHNIK

VIBRATORY Centrifuge

High throughputs up to 350 t/h of solids,

mainly used in coal washeries and sea salt

plants.

TEMA / SIEBTECHNIK

TURBO CASCADE Centrifuge

The Turbo Cascade Slide Centrifuge is used

for de-watering of nylon granulates PE, PP

and PS beads. Final moistures down to 0,01

% are being attained.

6

Centrifuges

TEMA / SIEBTECHNIK

TWIN-CONE Decanter Centrifuge

The same as with the decanter centrifuge,

only with an additional larger cone to cre-

ate more area for separation and to obtain

higher g-forces for lower final moistures and

a clear liquid separation.

TEMA / SIEBTECHNIK

THE TUBE Decanter Centrifuge

Combines the benefits of the solid bowl

centrifuge and the worm/screen centrifuge,

especially designed for high mass flow rates,

for large clarification volumes (variable design),

with large screen length (variable design),

large open screen area, patented screen

change from the outside, patented special

wear protection, patented special overload

device, and split gears up to 50.000 Nm.

TEMA / SIEBTECHNIK

SHORT-BOWL Decanter Centrifuge

This Short-Bowl Decanter Centrifuge is from

a similar centrifuge housing design as our

Conturbex centrifuge, but with rotating parts

as a solid bowl decanter with a short bowl,

suitable to separate fine solids with a high-

specific weight out of a slurry.

7

Dryer / Cooler

TEMA / TEMA PROCESS

Fluidized Bed Cooler

The product fluidization in combination with

the shaking movement gives optimum per-

formance to final product quality. Mainly

used in chemical, mineral, fertilizer and food

industries.

TEMA / TEMA PROCESS

Fluidized Bed Dryer/Cooler

As with the fluidized bed cooler, the dryer/

cooler gives a dry, free-flowing product. The

fluidized bed dryer/cooler can be supplied

with dust cyclones, bag filter units or wet

scrubber.

TEMA / SIEBTECHNIK

Centrifuge Pilot Installation

All centrifuges can be tested on pilot scale in

SIEBTECHNIK‘s centrifuge laboratory.

Performance- and scale-up tests can be

done in this laboratory. These centrifuges

can also be sent-out in the field, if product

requires this.

8

Screening Machines

TEMA / SIEBTECHNIK

Screening Machine Type HG

Both linear and circular motion screening

machines with screening areas from 0,3 -

50 m2 are used for applications like sand and

gravel, minerals, fertilizers, salts, sugar, com-

post etc - both wet and dry screening.

TEMA / SIEBTECHNIK

Screening Machine Type BHG

Linear motion screening machine, both in

single deck and in double deck execution,

with screening areas from 0,3 up to 50 m2,

with two to five sections with gradually flat-

tening inclination, for applications like coal,

ores, minerals, potash, limestone resp. sand

and gravel – both wet and dry screening.

TEMA / SIEBTECHNIK

Elliptical Motion Screening Machine

Combines the advantages of circular and

linear motion screens, thus ensuring higher

specific throughputs and less blinding, with

double shaft drive with electronic control

with infinitely variable angle of throw and

vibration frequency, adjustable during opera-

tion.

9

Screening Machines

TEMA / SIEBTECHNIK

Screening Machine Type MDS

For high capacity in a small area, with accu-

rate cuts even with smaller apertures, clas-

sifying of difficult materials, for applications

with relatively high content of marginal par-

ticles and a critical moisture.

TEMA / HEIN, LEHMANN

LIWELL Screening Machine

Non-blinding operation because of high

accelaration up to 50 g. For all kinds of bulk

materials and ideal for dry classification with

up to 20 % moisture.

TEMA / SIEBTECHNIK

SM Jig

Are especially suitable to separate relatively

light materials, like wood and other organic

materials from gravel and other kinds of stone;

also suitable to separate several minerals.

These machines take care of a sufficient

purity of the final product and can easily be

introduced in existing installations.

10

Sample Taking / Size Reduction

TEMA / SIEBTECHNIK

Sample Taking

Automatic sample taking and preparation

plants for mineral and chemical bulk prod-

ucts. The rotating hammer sampler costs

less to install and to operate and is accepted

by international standards.

Depending on requirement various other

primary sample takers, like spoon-, bucket-,

chute- and many other sample takers are

available.

TEMA / SIEBTECHNIK

Sample Preparation

A wide range of sample preparation ma-

chine is available, line turnstile dividers,

rotary dividers, rotary pipe dividers and mass

dividers, as well as sample collectors, sample

transport systems, laboratory instruments

and automatic moisture analyser system.

TEMA / SIEBTECHNIK

Sample Pulverizing

The laboratory disc mill is available in dif-

ferent sizes and grinding barrels in different

materials of construction for fine pulverizing

of mineral samples. Suitable for all analytical

processes.

11

Sample Taking / Size Reduction

TEMA / SIEBTECHNIK

Hammer and Hammer Impact Mills

are suitable for crushing soft to medium

hard materials (degree of hardness accord-

ing to F. Mohs 2 - 5).

For example:

Agglomerates, coal, limestone, gypsum and

slag.

They are designed for large throughput vol-

umes and trouble-free operation.

TEMA / SIEBTECHNIK

Double and Single Roller Mills

are suitable for crushing brittle materials of all

hardnesses, such as rock, ores, coal, coke, etc.

The material to be crushed is pulled by friction

into the gap between two rollers rotating in

opposite directions. The material is crushed

by pressure and shearing action. This results

in an uniform size of the discharge with few

fines.

TEMA / SIEBTECHNIK

ESM Eccentric Vibrating Mill

Vibrating mills are suitable for size reduction of all brittle materials. The attainable ulti-mate fineness is app. 0-5 micron. Mills are suitable for mechanical-chemical activation processes.The new ESM vibrating mill has many advan-tages over the conventional vibrating mill like:higher throughput, reduction of energy, shorter milling time, both batch- and con-tinuous operation

Steenplaetsstraat 22 - 26

2288 AA Rijswijk The Netherlands

postal address

P.O. Box 3220

2280 GE Rijswijk The Netherlands W B 9 0 3 e / 1 0 . 2 0 1 1

T +31 (0) 70 390 65 55

F +31 (0) 70 399 33 90

www.tema.nl

sales@tema.nl

chemical and mineralprocess equipmentB.V.