Delivering powerful solutions. - Hydraulic Hosenationalhose.com/wp-content/uploads/2016/11/... · powerful solutions. EAT Industrial Hose Master Catalog – NA E-HOO-MC003-E2 2014

Eaton® Industrial Hose Master Catalog North America

Deliveringpowerfulsolutions.

A-5EATON Industrial Hose Master Catalog – NA E-HOOV-MC003-E2 2014

Introduction A-2 – A-12

Air and Multipurpose High Pressure B-5 – B-8

Medium Pressure B-9 – B-11

Low Working Pressure B-12 – B-18

General Air and Water B-19 – B-22

Specialty B-23 – B-24

Cement, Plaster and Grout Cement and Concrete C-4 – C-6

Dry Bulk C-7 – C-8

Chemical Suction and Discharge D-6 – D-18

Discharge D-19 – D-20

Specialty D-21 – D-22

Food and Beverage Food Suction & Discharge E-4 – E-6

Beverage Suction & Discharge E-7 – E-9

Beverage Discharge E-10 – E-12

Dry Bulk Discharge E-13

Cleaning Service E-14 – E-17

Gaseous LPG F-4 – F-5

Material Handling Slurry and Abrasive Resistant G-4 – G-5

Dry Material G-6 – G-15

Sandblast G-16 – G-17

Oil and Gas Exploration Frac and Well Service H-4 – H-5

Suction and Discharge H-6 – H-8

Discharge H-9

Potable Water H-10

Petroleum Dock I-4

Suction and Discharge I-5 – I-15

Discharge I-16 – I-18

Specialty Fire Fighting J-4

Steel Mill J-5

Welding J-6 – J-7

Road Construction J-8 – J-10

Specialized J-11 – J-13

Steam Steam Hose K-6 – K-15

Water Suction and Discharge L-5 – L-9

Discharge L-10 – L-17

Specialty L-18 – L-20

Sewer Cleaning L-21 – L-23

Couplings General Information M-1 – M-8

Chemical Resistance N-1 – N-12

General Information General Hose Information O-2 – O-19

Index O-20

Terms and Conditions P-1

Table of Contents Section Pages

Eaton Industrial Hose Products

A-6 EATON Industrial Hose Master Catalog – NA E-HOOV-MC003-E2 2014

Introduction

Eaton Industrial Hose

Air and Multipurpose

B-5 H6009 BULLDOG GOLD™

B-6 H6008 BULLDOG YELLOW JACK™

B-7 EHA500 High Pressure Air

B-8 H9622 Contractors Air

B-9 H6002 BULLDOG™ Air

B-10 EHA502 Heavy Duty Air

B-11 EHA501 Medium Duty Air

B-12 H9949 SHOCK-SAFE™

B-13 H1776 & H177 PERFECTION™ 300

B-14 H115 & H116 PERFORMER II™

B-15 H201 EASY COUPLE™

B-16 H265 ULTRAFORCE™

B-17 H275 POLYFORCE II™

B-18 H1812 INDUSTRIAL AIR/WATER

B-19 H1981 & H1982 MARATHONER™ Non-Conductive

B-20 H0105 BOSFLEX™ A/W

B-21 H0106 BOSFLEX™ A/W

B-22 H1987 Contractors Water

B-23 EHW028 Heavy Duty MSHA Mine Spray

B-24 H1571 Mineforce

Cement, Plaster and Grout

C-4 EHK007 MARAUDER™ Heavy Duty Concrete Pumping

C-5 EHK007 Coupling Concrete Pumping Couplings

C-6 EHK006 MARAUDER™ Heavy Duty Plaster & Grout Spraying

C-7 EHK002 Dry Bulk Suction & Discharge

C-8 EHK016 Dry Bulk Discharge

Chemical

D-6 H0060 ARMORCAT™ Corrugated Petrochemical

D-7 H0554 ARMORCAT™ Petrochemical

D-8 H0599 CHEMCAT™ Corrugated Petrochemical

D-9 H0523 CHEMCAT™ Petrochemical

D-10 EHC005 Corrugated UHMW-PE Suction & Discharge

D-11 EHC004 UHMW-PE Suction & Discharge

D-12 H0661 COUGAR™ Corrugated

D-13 H8359 PANTHER™ Chemical

D-14 H0615 Corrugated Green CROSS-LINKED™

D-15 H0378 Green CROSS-LINKED™

D-16 EHC002 Flat Corrugated Chemical Suction & Discharge

D-17 EHC001 Chemical Suction & Discharge

D-18 H0345 TIGER™ Chemical Suction & Discharge

D-19 H9699 ALLEYCAT™ Hot Liquid

D-20 H0346 LEOPARD™ Chemical Discharge

D-21 H1941 & H1942 NYALL™

D-22 H1561 CHEMFORCE™

Food and Beverage

E-4 H0350 LION™ Food Transfer

E-5 H0384 Grey Food Transfer

E-6 EHF002 Liquid Food Suction & Discharge

E-7 EHF021 Flat Corrugated Alcohol Suction & Discharge

E-8 EHF020 Alcohol Suction & Discharge

E-9 EHB502 & EHB503 Medium Duty Beer/Wine Suction & Discharge

E-10 EHF006 Softwall Potable Water Discharge

E-11 H285 CLEARFORCE™ - R

E-12 H160 CLEARFORCE™ - NR

E-13 H0413 Dry Bulk Discharge

E-14 H1066 Creamery/Packaging Washdown

E-15 H9673 WASHDOWN™ 1250

E-16 H9610 WASHDOWN™ 1000

E-17 H1531 SUPRAFORCE™

Gaseous

F-4 H900 UL LPG

F-5 EH920 2” UL LPG

Material Handling

G-4 EHM001-Coupling Coupling and Gaskets

G-5 EHM001 Corrugated Dry Bulk Suction & Discharge

G-6 EHK004 Channeled Dry Bulk Suction & Discharge

G-7 EHK003 Corrugated Dry Bulk Suction & Discharge

G-8 EHK002 Dry Bulk Suction & Discharge

G-9 EHK010 Dry Bulk Suction & Discharge

G-10 EHK016 Dry Bulk Discharge

G-11 EHK001 Dry Bulk Flat Discharge

G-12 H0347 WILDCAT™ Dry Material

G-13 H0521 WILDCAT™ Heavy Duty Dry Material

Page Hose Description Page Hose Description

A-9EATON Industrial Hose Master Catalog – NA E-HOOV-MC003-E2 2014

Intr

oduc

tion

Be sure to reference chemical compatibility recommendations in the Chemical Resistance Charts starting on page N-1 through N-11.

If you have any questions, please contact Eaton Technical Support at 1-888-258-0222.

S - Size (I.D., O.D. and length)

T - Temperature of material conveyed and environmental

A - Application, the conditions of use

M - Material being conveyed, type and concentration

P - Pressure to which the assembly will be exposed

E - Ends; style, type, orientation, attachment methods, etc.

D - Delivery testing, quality, packaging, and delivery requirements

Special Requirements/Other Information

Will the selected hose need to possess any of the following features:Branding information needed on the hose? ___________________________________________________________________________

Color coding? _____________________________________________________________________________________________________

Any special designations required by agencies or associations? _________________________________________________________

Will any regulatory agency approvals be required? If yes, which one(s)? _________________________________________________

Non-conductive rubber needed to prevent transmittal of electricity? _____________________________________________________

Static wire or static-dissipating tube to prevent static electricity buildup and discharge sparks? _____________________________

Pin-pricked cover to resist blistering when transferring hot materials or air/gases under pressure? __________________________

Abrasion sleeve or guard? __________________________________________________________________________________________

Heat shield? ______________________________________________________________________________________________________

Sub-zero exposure resistance? ______________________________________________________________________________________

Special assembly requirements? ____________________________________________________________________________________

Continuous transfer service or intermittent service? ___________________________________________________________________

Flexibility: Do space restrictions exist where the hose will be used? _____________________________________________________

Bend Radius: of the hose relative to space in which hose will be used? _________________________________________________

Considering the intended use of the hose, how flexible will it need to be (check one)?

Extremely flexible Slightly flexible Not an issue

Weight: How will the hose be handled during use, if all? _______________________________________________________________

How important is the weight of the hose going to be in this application (check one)?

Very important Slightly important Not an issue

5. Pressure & SuctionWhat working pressure is required? __________________________________________________ Are pressure surges involved in this application? How high? _____________________________

What safety factor is required? ______________________________________________________

Is this a suction application? What vacuum rating is required? ___________________________

6. EndsEnd ______________________________________________________________________________

Material ___________________________________________________________________________

Attachment Method ________________________________________________________________

7. Delivery Qty. required Date required Pkg. requirements

Testing Required - No Yes If Yes, Type:

Certification Required - No Yes If Yes, Type:

B-1EATON Industrial Hose Master Catalog – NA E-HOOV-MC003-E2 2014

Air

and

Mul

tipur

poseAir and Multipurpose

High Pressure

H6009 BULLDOG GOLD™ . . . . . . . . . . . . . . . . . . . . . . B-5

H6008 BULLDOG YELLOW JACK™ . . . . . . . . . . . . . . . . B-6

EHA500 High Pressure Air . . . . . . . . . . . . . . . . . . . . . . . B-7

H9622 Contractors Air . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

Medium Pressure

H6002 BULLDOG™ Air . . . . . . . . . . . . . . . . . . . . . . . . . B-9

EHA502 Heavy Duty Air . . . . . . . . . . . . . . . . . . . . . . . B-10

EHA501 Medium Duty Air . . . . . . . . . . . . . . . . . . . . . . B-11

Low Working Pressure

H9949 SHOCK-SAFE™ . . . . . . . . . . . . . . . . . . . . . . . . . B-12

H1776 & H1777 PERFECTION™ 300 . . . . . . . . . . . . . B-13

H115 & H116 PERFORMER II™ . . . . . . . . . . . . . . . . . . B-14

H201 EASY COUPLE™ . . . . . . . . . . . . . . . . . . . . . . . . . B-15

H265 ULTRAFORCE™ . . . . . . . . . . . . . . . . . . . . . . . . . B-16

H275 POLYFORCE II™ . . . . . . . . . . . . . . . . . . . . . . . . . B-17

H1812 Industrial Air/ Water . . . . . . . . . . . . . . . . . . . . . . B-18

General Air and Water

H1981 & H1982 MARATHONER™, Non-Conductive . . . . B-19

H0105 BOSFLEX™ A/W . . . . . . . . . . . . . . . . . . . . . . . . B-20

H0106 BOSFLEX™ A/W . . . . . . . . . . . . . . . . . . . . . . . . B-21

H1987 Contractors Water . . . . . . . . . . . . . . . . . . . . . . . B-22

Specialty

EHW028 Heavy Duty MSHA Mine Spray . . . . . . . . . . B-23

H1571 Mineforce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-24

Air

and

Mul

tipur

pose

B-2 EATON Industrial Hose Master Catalog – NA E-HOOV-MC003-E2 2014

Air and M

ultipurpose

Air and Multipurpose

High Pressure H6009 BULLDOG GOLD™

Application: Air-operated equipment, boring and miningTube: Nitrile (RMA Class A) Reinforcement: 1-, 2- and 3-wire braid Cover: Pin-picked Carboxylated nitrileTemp: -40°C to +121°C (-40°F to +250°F)Pressure: 35-70 bar / 500-1000 psi

H6008 BULLDOG YELLOW JACK™

Application: Power drills, boring, mining and air-operated equipmentTube: Vinyl nitrile, (RMA Class A) Reinforcement: 1-, 2- & 3-wire braid Cover: Neoprene MSHA approvedTemp: -40°C to +93°C, (-40°F to +200°F)Pressure: 28-103 bar / 400-1500 psi

EHA500 High Pressure Air

Application: High-pressure airTube: Oil-resistant nitrile blend Reinforcement: High-tensile steel wire Cover: Synthetic rubberTemp: -40°C to +93°C, (-40°F to +200°F)Pressure: 41 bar / 600 psi

H9622 Contractors Air

Application: Power drills, boring, mining and air-operated equipmentTube: Nitrile (RMA Class A) Reinforcement: 1- & 2-wire braid Cover: NeopreneTemp: -40°C to +93°C, (-40°F to +200°F)Pressure: 35-70 bar / 500-1000 psi

Medium Pressure H6002 BULLDOG™ Air

Application: Power drills, boring, mining and air-operated equipmentTube: Nitrile Reinforcement: 2-fiber braid or fiber ply Cover: Neoprene or vinyl nitrile Temp: -40°C to +93°C, (-40°F to +200°F)Pressure: 13,8-28,0 bar / 200-400 psi

EHA502 Heavy Duty Air

Application: Heavy-duty air Tube: Synthetic rubber Reinforcement: High-tensile synthetic textile Cover: Synthetic rubberTemp: -25°C to +70°C, (13°F to +158°F)Pressure: 28 bar / 400 psi

EHA501 Medium Duty Air

Application: Medium-duty air serviceTube: Synthetic rubber Reinforcement: High-tensile synthetic textile Cover: Synthetic rubber Temp: -25°C to +70°C, (13°F to +158°F)Pressure: 20,7 bar / 300 psi

Low Working PressureH9949 SHOCK-SAFE™

Application: Air and water transfer where hose must be non-conductiveTube: Nitrile (non-conductive) Reinforcement: 2-fiber braidCover: Vinyl nitrile (non-conductive) Temp: -40°C to +82°C, (-40°F to +180°F)Pressure: 19 bar / 275 psi

H1776 & H1777 PERFECTION™ 300

Application: Air and water transfer, air toolsTube: Nitrile (RMA Class A) Reinforcement: 2-fiber braid Cover: Vinyl nitrile Temp: -40°C to +82°C, (-40°F to +180°F)Pressure: 22,4 bar / 325 psi

H115 & H116 PERFORMER II™

Application: Air and water transfer, air-operated tools and pneumatic tools on production lineTube: Nitrile (RMA Class B) Reinforcement: 1- & 2-fiber braid Cover: Vinyl nitrileTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 15,5-20,7 bar / 225-300 psi


Air

and

Mul

tipur

pose

H201 EASY COUPLE™

Application: Air and water transfer, power for air-operated and pneumatic tools Tube: Vinyl Nitrile (RMA Class A) Reinforcement: 1-braid fiber Cover: Neoprene or Vinyl nitrileTemp: -40°C to +100°C, (-40°F to +212°F)Pressure: 14-21 bar / 200-300 psi

H265 ULTRAFORCE™

Application: Air and water transfer, power for air-operated tools and lubricated airTube: Modified vinyl Reinforcement: 2 spiral fiber Cover: Pin-pricked modified rubberTemp: -23°C to +65°C, (-10°F to +150°F)Pressure: 8,5-24 bar / 125-350 psi

H275 POLYFORCE II™

Application: Air and water transfer, air-operated tools and lubricated airTube: PVC Reinforcement: 2 spiral fiber Cover: Pin-pricked PVCTemp: -23°C to +65°C, (-10°F to +150°F)Pressure: 8,5-17,2 bar / 125-250 psi

H1812 Industrial Air/ Water

Application: Air and water transfer, pneumatic tools and spraying water-based fertilizers and pesticidesTube: EPDM rubber Reinforcement: 2-fiber braid Cover: EPDM rubberTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 17,2-19 bar / 250-275 psi

General Air & WaterH1981 & H1982 MARATHONER™ – Non-Conductive

Application: Medium oil-resistance, air and water transferTube: Nitrile blend Reinforcement: 2- or 4-fiber spiral Cover: Pin-pricked nitrile blendTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 13,8-20,7 bar / 200-300 psi

H0105 BOSFLEX™ A/W

Application: Air and water transfer, and spraying and conveying water-based liquid fertilizers and pesticidesTube: EPDM Reinforcement: 4-fiber spiral and 2-fiber braid Cover: EPDMTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 13,8-20,7 bar / 200-300 psi

H0106 BOSFLEX™ A/W

Application: Air and water transfer, and spraying and conveying water-based liquid fertilizers and pesticidesTube: EPDM Reinforcement: 2-spiral fiber Cover: EPDMTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 13,8-20,7 bar / 200-300 psi

H1987 Contractors Water

Application: For transfer of waterTube: EPDM rubber Reinforcement: 2-fiber spiral Cover: Pin-pricked EPDM rubberTemp: -34°C to +71°C, (-30°F to +160°F)Pressure: 10,5 bar / 150 psi

Specialty EHW028 Heavy Duty MSHA Mine Spray

Application: High pressure air in minesTube: Oil-mist resistant nitrile blend Reinforcement: High-tensile steel wireCover: MSHA pin-pricked neopreneTemp: -35°C to +100°C, (-31°F to +212°F)Pressure: 70 bar / 1000 psi

H1571 Mineforce

Application: Air and water transfer and high pressure air toolsTube: Modified vinyl Reinforcement: 4-fiber spiral Cover: PVC/nitrile blendTemp: -28°C to +66°C, (-20°F to +150°F)Pressure: 28 bar / 400 psi


Air and M

ultipurpose

Air and MultipurposeIntroduction and Safety Information

WARNING: Testing can be dangerous and should be done only by trained personnel using proper tools

and procedures . Failure to follow such procedures might result in serious injury, death, or damage to property .

WARNING: Failure to properly follow the manufacturer’s recommended procedures for the

care, maintenance, and storage of a particular hose may result in its failure to perform in the manner intended and may result in serious injury, death, or damage to property .

WARNING: Consult with the Coupling Manufacturer to make sure you choose the correct coupling and

proper assembly for the application . Such matching of hose and couplings, and assembling of couplings, should be performed only by trained personnel using proper tools and procedures . Failure to follow manufacturer’s instructions or failure to use trained personnel may result in serious bodily injury and/or property damage .

WARNING: Never use a hose to transfer material it is not specifically meant to transfer . Doing so could

deteriorate the hose and result in leaking, hose bursting, or end blow-offs . This could lead to serious personal injury or death . Always transfer material in a hose that is designed specifically to transfer that material . This information is listed in this catalog .

WARNING: Consider both working pressure and pressure surges when determining “maximum”

pressure . Failure to select a hose that meets both these requirements could lead to end blow-offs, hose leakage, and hose bursting . The result could be serious injury or death . The Eaton hose you choose must meet or exceed the required working pressure, and must have a safety factor to allow for surge pressure .

WARNING: Be aware that if you replace a hose with one having a different I .D . than the original hose,

material velocity could increase or decrease, possibly creating static electricity . This could lead to an explosion causing serious injury or death .

WARNING: Selection of the proper hose for the application is essential to the proper operation and

safe use of the hose and related equipment . Inadequate attention to selection of hose for the application can result in serious bodily injury or property damage . In order to avoid serious bodily injury or property damage resulting from selection of the wrong hose, you should carefully review the information in this catalog .

Every Hose is Easily Identified• Every foot of hose is easily identified by means of

permanent branding . This makes hose selection on the job quicker, easier and safer, and buying hose is easier too—because you can tell at a glance that you’re getting exactly the hose you ordered .

Multi-Purpose Hose for Specialized Uses• Eaton calls them “Multipurpose” hoses, meaning they’ll

do a tremendous variety of jobs . In many cases one Eaton hose can replace several different “special purpose” styles . This helps keep expenses low .

Brand Name Identity (and the quality that goes behind it)• With the Eaton brand name on the hose you buy, you are

assured maximum value and consistent quality . With over 100 years worth of reputation at stake, we wouldn’t have it any other way .

Air and Multipurpose Hose Safety InformationImportant!


Construction:

Tube: Nitrile (RMA Class A)

Reinforcement: 1 .00” - 1 .25” 1-wire braid 1 .50” - 3 .00” 2-wire braid 4 .00” 3-wire braid

Cover: Pin-pricked carboxylated nitrile

Operating Temperature:

-40°C to +121°C (-40°F to +250°F)

Application:• Provide power to

air-operated construction equipment

• Power air-operated drills, boring, and mining equipment

Markets:• Construction• Mining• Oil and gas exploration• Water drilling• Ship building

Type of Couplings:• Eaton ”U” Series• TTC• Union• Boss male• Ground joint female• Air hammer• Air king• Eaton quick disconnect

Contact coupling manufacturer for attachment procedure and other coupling recommendations

Air and MultipurposeHigh Pressure

BULLDOG GOLD™H6009

Refer to warnings and safety information on pages O-1 – O-16.

Use of damaged hose or improper use may result in bodily injury or property damage. Please consult Eaton catalog or Technical Support for proper application.

Part No.

Hose I.D. Hose O.D.Max Operating

PressureBurst

Pressure Weight Length

mtr ft DN mm in mm in bar psi bar psi kg/m lbs/ft mtr ft

H600916- 50 25 25,4 1 .00 38,1 1 .50 70,0 1000 275 4000 0,96 0 .64 50

H600916- 100 25 25,4 1 .00 38,1 1 .50 70,0 1000 275 4000 0,96 0 .64 100

H600920- 50 31 31,8 1 .25 46,0 1 .81 55,0 800 220 3200 1,80 1 .20 50

H600924 50 38 38,1 1 .50 54,0 2 .12 41,0 600 165 2400 2,01 1 .34 50

H600924- 100 38 38,1 1 .50 54,0 2 .12 41,0 600 165 2400 2,01 1 .34 100

H600932- 50 51 50,8 2 .00 67,5 2 .66 41,0 600 165 2400 2,95 1 .97 50

H600932- 100 51 50,8 2 .00 67,5 2 .66 41,0 600 165 2400 2,95 1 .97 100

H600932- 150 51 50,8 2 .00 67,5 2 .66 41,0 600 165 2400 2,95 1 .97 150

H600940- 50 60 63,5 2 .50 80,2 3 .16 41,0 600 165 2400 3,75 2 .50 50

H600940- 100 60 63,5 2 .50 80,2 3 .16 41,0 600 165 2400 3,75 2 .50 100

H600948- 40 80 76,2 3 .00 94,5 3 .72 41,0 600 165 2400 4,72 3 .15 50

H600948- 100 80 76,2 3 .00 94,5 3 .72 41,0 600 165 2400 4,72 3 .15 100

H600964- 50 102 101,6 4 .00 127,0 5 .00 35,0 500 138 2000 7,97 5 .32 50

H600964- 100 102 101,6 4 .00 127,0 5 .00 35,0 500 138 2000 7,97 5 .32 100

H600964- 150 102 101,6 4 .00 127,0 5 .00 35,0 500 138 2000 7,97 5 .32 150

Air

and

Mul

tipur

pose

– H

igh

Pres

sure


Construction:

Tube: Vinyl nitrile (RMA Class A)

Reinforcement: 0 .50” – 1 .25” 1-wire braid 1 .50” – 3 .00” 2-wire braid 4 .00” 3-wire braid

Cover: Pin-pricked neoprene MSHA approved


-40°C to +93°C (-40°F to +200°F)

Application:• Power operated drills,

boring, and mining equipment

• Provide power to air-operated equipment

Markets:• Oil and gas exploration• Metal working• Construction• Mining

Type of Couplings:• Eaton "U" Series• Eaton "Z" Series• Boss• Ground joint• Air hammer• Air king• Eaton quick disconnect



BULLDOG YELLOW JACK™H6008



Part No.


PressureBurst



H600808 50 12 12,7 0 .50 24,6 0 .97 103,0 1500 420 6000 0,60 0 .40 50

H600808-100 100 12 12,7 0 .50 24,6 0 .97 103,0 1500 420 6000 0,60 0 .40 100

H600812-100 100 19 19,0 0 .75 31,8 1 .25 83,0 1200 335 4800 1,00 0 .67 100

H600816 50 25 25,4 1 .00 38,1 1 .50 69,0 1000 280 4000 1,27 0 .85 50

H600816-100 100 25 25,4 1 .00 38,1 1 .50 69,0 1000 280 4000 1,27 0 .85 100

H600820 50 31 31,8 1 .25 46,0 1 .81 45,0 650 182 2600 1,87 1 .25 50

H600824 50 38 38,1 1 .50 54,0 2 .12 42,0 600 168 2400 2,49 1 .66 50

H600824-100 100 38 38,1 1 .50 54,0 2 .12 42,0 600 168 2400 2,49 1 .66 100

H600832 50 51 50,8 2 .00 67,4 2 .66 42,0 600 168 2400 3,09 2 .06 50

H600832-100* 100 51 50,8 2 .00 67,4 2 .66 42,0 600 168 2400 3,09 2 .06 100

H600840 50 60 63,5 2 .50 80,2 3 .16 28,0 400 112 1600 3,66 2 .44 50

H600840-100* 100 60 63,5 2 .50 80,2 3 .16 28,0 400 112 1600 3,66 2 .44 100

H600848 50 80 76,2 3 .00 94,5 3 .72 28,0 400 112 1600 4,15 2 .77 50

H600848-100 100 80 76,2 3 .00 94,5 3 .72 28,0 400 112 1600 4,15 2 .77 100

H600864 50 102 101,6 4 .00 126,9 4 .99 28,0 400 112 1600 6,43 4 .29 50

* 150 ft . length available

Air and M

ultipurpose – High Pressure



Construction:

Tube: Oil-resistant nitrile blend

Reinforcement: High-tensile steel wire

Cover: Pin-pricked, abrasion, ozone, and weather resistant synthetic rubber


-40°C to +93°C (-40°F to +200°F)

Application:• High-pressure air service

Markets:• Construction• Oil field equipment• Drilling equipment• Mining• Rental industry• Steel• Paper

Type of Couplings:• Boss• Ground joint• Air hammer• Air king• Eaton quick disconnect


Part No. Hose I.D. Hose O.D.Max Operating

PressureBurst



EHA500-08YW- MXX 100 12 12,7 0 .50 23,0 0 .91 41,0 600 165 2400 0,51 0 .34 40-61 100

EHA500-12YW- MXX 100 19 19,0 0 .75 29,5 1 .16 41,0 600 165 2400 0,62 0 .42 40-61 100

EHA500-16YW- MXX 100 25 25,4 1 .00 36,0 1 .42 41,0 600 165 2400 0,88 0 .59 40-61 100

EHA500-20YW- MXX 100 31 31,8 1 .25 43,0 1 .69 41,0 600 165 2400 1,12 0 .75 40-61 100

EHA500-24YW- MXX 100 38 38,1 1 .50 50,0 1 .97 41,0 600 165 2400 1,55 1 .04 40-61 100

EHA500-32YW- MXX 100 51 50,8 2 .00 66,0 2 .60 41,0 600 165 2400 2,51 1 .69 40-61 100

EHA500-40YW- MXX 100 60 63,5 2 .50 80,0 3 .15 41,0 600 165 2400 3,36 2 .26 40-61 100

EHA500-48YW- MXX 100 80 76,2 3 .00 93,9 3 .70 41,0 600 165 2400 4,49 3 .02 40-61 100

EHA500-64YW- MXX 100 102 101,6 4 .00 122,0 4 .80 41,0 600 165 2400 6,77 4 .55 40-61 100

**50 ft . length also available and black cover available on a MTO basis

High Pressure AirEHA500



Air

and

Mul

tipur

pose

– H

igh

Pres

sure


Construction:


Reinforcement: 0 .50" - 1 .25" 1-wire braid 1 .50" - 3 .00" 2-wire braid

Cover: Pin-pricked neoprene


-40°C to +93°C (-40°F to +200°F)


boring, and mining equipment


Markets:• Oil and gas exploration• Metal working• Construction• Mining

Type of Couplings:• Eaton "U" Series• Eaton "Z" Series• Boss• Ground joint• Air hammer• Air king• Eaton quick disconnect



Contractors AirH9622



Part No.


PressureBurst



H962208 50 12 12,7 0 .50 23,8 0 .94 70,0 1000 275 4000 0,51 0 .34 50

H962208- 100 12 12,7 0 .50 23,8 0 .94 70,0 1000 275 4000 0,51 0 .34 100

H962212 50 19 19,0 0 .75 30,2 1 .19 70,0 1000 275 4000 0,65 0 .44 50

H962212-* 100 19 19,0 0 .75 30,2 1 .19 70,0 1000 275 4000 0,65 0 .44 100

H962216 50 25 25,4 1 .00 38,1 1 .50 60,0 850 235 3400 0,91 0 .61 50

H962216-* 100 25 25,4 1 .00 38,1 1 .50 60,0 850 235 3400 0,91 0 .61 100

H962220 50 31 31,8 1 .25 43,7 1 .72 35,0 500 138 2000 1,20 0 .81 50

H962220-* 100 31 31,8 1 .25 43,7 1 .72 35,0 500 138 2000 1,20 0 .81 100

H962224 50 38 38,1 1 .50 53,9 2 .12 35,0 500 138 2000 2,23 1 .50 50

H962224- 100 38 38,1 1 .50 53,9 2 .12 35,0 500 138 2000 2,23 1 .50 100

H962232 50 51 50,8 2 .00 67,4 2 .65 35,0 500 138 2000 3,03 2 .04 50

H962232-* 100 51 50,8 2 .00 67,4 2 .65 35,0 500 138 2000 3,03 2 .04 100


Air and M

ultipurpose – High Pressure


Construction:

Tube: Nitrile

Reinforcement: .50" - 1 .00" 2-fiber braid 1 .25" - 3 .00" 2-fiber ply

Cover: .50" - 1 .00" pin-pricked

neoprene1 .25" - 3 .00" pin-pricked

vinyl nitrile


-40°C to +93°C (-40°F to +200°F)


boring and mining equipment


Markets:• Metal working• Construction• Mining• Forest industry

Type of Couplings:• Eaton “U” Series• Eaton “Z” Series• Boss• Ground joint• Air hammer• Air king• Eaton quick disconnect



PressureBurst



H600208 50 12 12,7 0 .50 23,0 0 .91 28,0 400 110 1600 0,46 0 .31 50

H600208-* 100 12 12,7 0 .50 23,0 0 .91 28,0 400 110 1600 0,46 0 .31 100

H600212 50 19 19,0 0 .75 30,2 1 .19 28,0 400 110 1600 0,68 0 .46 50

H600212- 100 19 19,0 0 .75 30,2 1 .19 28,0 400 110 1600 0,68 0 .46 100

H600216 50 25 25,4 1 .00 38,1 1 .50 28,0 400 110 1600 1,00 0 .67 50

H600216- 100 25 25,4 1 .00 38,1 1 .50 28,0 400 110 1600 1,00 0 .67 100

H600220 50 31 31,8 1 .25 46,0 1 .81 28,0 400 110 1600 1,28 0 .86 50

H600220- 100 31 31,8 1 .25 46,0 1 .81 28,0 400 110 1600 1,28 0 .86 100

H600224 50 38 38,1 1 .50 52,4 2 .06 28,0 400 110 1600 1,47 0 .99 50

H600224- 100 38 38,1 1 .50 52,4 2 .06 28,0 400 110 1600 1,47 0 .99 100

H600232 50 51 50,8 2 .00 66,7 2 .63 20,7 300 83 1200 1,89 1 .27 50

H600232- 100 51 50,8 2 .00 66,7 2 .63 20,7 300 83 1200 1,89 1 .27 100

H600248- 150 80 76,2 3 .00 90,5 3 .56 13,8 200 55 800 2,86 1 .92 150


Air and MultipurposeMedium Pressure

BULLDOG™ AirH6002



Air

and

Mul

tipur

pose

– M

ediu

m P

ress

ure


Heavy Duty AirEHA502



Air and M

ultipurpose – Medium

Pressure


Construction:

Tube: Oil-mist resistant synthetic rubber

Reinforcement: High-tensile synthetic textile

Cover: Abrasion, ozone, and weather resistant synthetic rubber


-25°C to +70°C (-13°F to +158°F)

Application:• Heavy-duty air service

Markets:• Construction• Mining• Oil and gas exploration• Drilling equipment• Rental industry• Steel• Quarries

Type of Couplings:• Boss male• Ground joint female• Air hammer• Air king• Eaton quick disconnect


Part No. LengthHose I.D. Hose O.D.Max Operating

PressureBurst

Pressure Weight


EHA502-08YW- MXX 100 12 12,7 0 .50 23,0 0 .91 28,0 400 83,0 1200 0,38 0 .26 40-61 100

EHA502-10YW- MXX 100 16 15,9 0 .62 26,0 1 .02 28,0 400 83,0 1200 0,45 0 .30 40-61 100

EHA502-12YW- MXX 100 19 19,0 0 .75 30,0 1 .18 28,0 400 83,0 1200 0,57 0 .38 40-61 100

EHA502-16YW- MXX 100 25 25,4 1 .00 37,0 1 .46 28,0 400 83,0 1200 0,72 0 .48 40-61 100

EHA502-20YW- MXX 100 31 31,8 1 .25 44,0 1 .73 28,0 400 83,0 1200 0,95 0 .64 40-61 100

EHA502-24YW- MXX 100 38 38,1 1 .50 51,0 2 .01 28,0 400 83,0 1200 1,21 0 .81 40-61 100

EHA502-28YW- MXX 100 45 44,5 1 .75 60,0 2 .36 28,0 400 83,0 1200 1,66 1 .12 40-61 100

EHA502-32YW- MXX 100 51 50,8 2 .00 66,0 2 .60 28,0 400 83,0 1200 1,83 1 .23 40-61 100

EHA502-40YW- MXX 100 60 63,5 2 .50 80,0 3 .15 28,0 400 83,0 1200 2,51 1 .68 40-61 100

EHA502-48YW- MXX 100 80 76,2 3 .00 92,0 3 .62 28,0 400 83,0 1200 2,79 1 .87 40-61 100

EHA502-64YW- MXX 100 102 101,6 4 .00 118,0 4 .65 28,0 400 83,0 1200 3,53 2 .37 40-61 100

* Product also available in BK Black


Construction:

Tube: Oil-mist resistant synthetic rubber

Reinforcement: High-tensile synthetic textile

Cover: Abrasion, ozone, and weather resistant synthetic rubber


-25°C to +70°C (-13°F to +158°F)

Application:• Medium duty air service

Markets:• Construction• Mining• Oil and gas exploration• Drilling equipment• Rental industry• Steel• Quarries

Type of Couplings:• Boss male• Ground joint female• Air hammer• Air king• Eaton quick disconnect



PressureBurst



EHA501-08YW- MXX 100 12 12,7 0 .50 22,0 0 .87 20,7 300 62,0 900 0,33 0 .22 40-61 100

EHA501-10YW- MXX 100 16 15,9 0 .62 25,0 0 .98 20,7 300 62,0 900 0,37 0 .25 40-61 100

EHA501-12YW- MXX 100 19 19,0 0 .75 29,0 1 .14 20,7 300 62,0 900 0,50 0 .33 40-61 100

EHA501-16YW- MXX 100 25 25,4 1 .00 36,0 1 .42 20,7 300 62,0 900 0,67 0 .45 40-61 100

EHA501-20YW- MXX 100 31 31,8 1 .25 44,0 1 .73 20,7 300 62,0 900 0,96 0 .64 40-61 100

EHA501-24YW- MXX 100 38 38,1 1 .50 51,0 2 .01 20,7 300 62,0 900 1,18 0 .79 40-61 100

EHA501-28YW- MXX 100 45 44,5 1 .75 60,0 2 .36 20,7 300 62,0 900 1,63 1 .10 40-61 100

EHA501-32YW- MXX 100 51 50,8 2 .00 65,0 2 .56 20,7 300 62,0 900 1,66 1 .11 40-61 100

EHA501-40YW- MXX 100 60 63,5 2 .50 80,0 3 .15 20,7 300 62,0 900 2,45 1 .65 40-61 100

EHA501-48YW- MXX 100 80 76,2 3 .00 92,0 3 .62 20,7 300 62,0 900 2,65 1 .78 40-61 100

EHA501-64YW- MXX 100 102 101,6 4 .00 118,0 4 .65 20,7 300 62,0 900 3,81 2 .56 40-61 100

* Product also available in BK Black


Medium Duty AirTS 745 - EN ISO 2398 Type 4 Class A

EHA501



Air

and

Mul

tipur

pose

– M

ediu

m P

ress

ure


Construction:

Tube: Nitrile (non-conductive)

Reinforcement: 2-fiber braid

Cover: Vinyl nitrile (non-conductive)


-40°C to +82°C (-40°F to +180°F)

Application:• Air and water transfer

where hose must be non-conductive

Markets:• Oil and gas exploration• Steel and metal• Mining• In-plant service

Type of Couplings:• Eaton “U” Series• Eaton “Z” Series• TTC• Eaton quick disconnect


Air and MultipurposeLow Working Pressure

SHOCK-SAFE™ H9949




PressureBurst



H994904- 500R 6 6,4 0 .25 15,1 0 .59 19,0 275 75,0 1100 0,22 0 .15 500

H994906- 500R 10 9,5 0 .38 18,3 0 .72 19,0 275 75,0 1100 0,28 0 .19 500

H994908- 500R 12 12,7 0 .50 22,2 0 .88 19,0 275 75,0 1100 0,40 0 .27 500

H994912- 500R 19 19,0 0 .75 29,4 1 .16 19,0 275 75,0 1100 0,61 0 .41 500

H994916- 300R 25 25,4 1 .00 36,5 1 .44 19,0 275 75,0 1100 0,95 0 .64 300

Air and M

ultipurpose – Low W

orking Pressure


Construction:


Reinforcement: H1777 1-fiber braid

H1776 2-fiber braid

Cover: Vinyl nitrile


-40°C to +82°C (-40°F to +180°F)

Application:• For air and water transfer• Air tools

Markets:• Construction• Mining• General industry• In-plant air service• Food processing

Type of Couplings:• Eaton “U” Series• Eaton “Z” Series• Long shank• Eaton quick disconnect



PERFECTION™ 300 H1776 & H1777




PressureBurst


H1777 mtr ft DN mm in mm in bar psi bar psi kg/m lbs/ft mtr ft

H177704- 500R 6 6,4 0 .25 12,7 0 .50 22,4 325 90,0 1300 0,16 0 .11 500

H177705- 500R 8 7,9 0 .31 15,9 0 .63 22,4 325 90,0 1300 0,25 0 .17 500

H177706- 500R 10 9,5 0 .38 16,7 0 .66 22,4 325 90,0 1300 0,25 0 .17 500

H177708- 500R 12 12,7 0 .50 20,6 0 .81 22,4 325 90,0 1300 0,36 0 .24 500

H1776

H177604- 500R 6 6,4 0 .25 15,1 0 .59 22,4 325 90,0 1300 0,22 0 .15 500

H177606- 500R 10 9,5 0 .38 18,3 0 .72 22,4 325 90,0 1300 0,30 0 .20 500

H177608- 500R 12 12,7 0 .50 22,2 0 .87 22,4 325 90,0 1300 0,46 0 .31 500

H177610- 500R 16 15,9 0 .62 25,4 1 .00 22,4 325 90,0 1300 0,54 0 .36 500

H177612- 500R 19 19,0 0 .75 29,4 1 .16 22,4 325 90,0 1300 0,65 0 .44 500

H177616- 300R 25 25,4 1 .00 36,5 1 .44 22,4 325 90,0 1300 0,89 0 .46 300

H177620- 300R 31 31,8 1 .25 44,5 1 .75 22,4 325 90,0 1300 0,97 0 .65 300

H177624- 300R 38 38,1 1 .50 50,8 2 .00 22,4 325 90,0 1300 1,22 0 .82 300

Air

and

Mul

tipur

pose

– L

ow W

orki

ng P

ress

ure


Construction:

Tube: Nitrile (RMA Class B)

Reinforcement: H115 - 2-fiber braid H116 - 1-fiber braid

Cover: Vinyl nitrile


-40°C to +82°C (-40°F to +180°F)

Application:• High oil-resistant• Air and water transfer• Provide power to

air-operated equipment• Pneumatic tools on

production line

Markets:• Construction• Forest industry• Metal working• Oil and gas exploration• In-plant service• Plastic molding• Ship building

Type of Couplings:• Eaton “U” Series• Eaton “Z” Series• TTC• Boss• Ground joint• Eaton quick disconnect


* 50 ft . length available ** Maximum three cut lengths on each reel and product packaging will vary +/- 10 %


PressureBurst



H11504- 550R 6 6,4 0 .25 14,8 0 .58 20,7 300 83,0 1200 0,15 0 .10 550

H11505-* 550R 8 7,9 0 .31 16,7 0 .66 20,7 300 83,0 1200 0,21 0 .14 550

H11506-* 550R 10 9,5 0 .38 18,1 0 .71 20,7 300 83,0 1200 0,28 0 .19 550

H11508-* 550R 12 12,7 0 .50 22,2 0 .88 20,7 300 83,0 1200 0,40 0 .27 550

H11512-* 550R 19 19,0 0 .75 29,4 1 .16 20,7 300 83,0 1200 0,61 0 .41 550

H11516-* 300R 25 25,4 1 .00 36,5 1 .44 15,5 225 62,0 900 0,68 0 .46 300

H11520-* 300R 31 31,8 1 .25 44,5 1 .75 15,5 225 62,0 900 0,97 0 .65 300

H11524-* 300R 38 38,1 1 .50 50,8 2 .00 15,5 225 62,0 900 1,22 0 .82 300

H116

H11604- 550R 6 6,4 0 .25 12,7 0 .50 15,5 225 62,0 900 0,12 0 .08 550

H11605- 550R 8 7,9 0 .31 15,9 0 .63 15,5 225 62,0 900 0,19 0 .13 550

H11606- 550R 10 9,5 0 .38 16,7 0 .66 15,5 225 62,0 900 0,19 0 .13 550

H11608- 550R 12 12,7 0 .50 20,6 0 .81 15,5 225 62,0 900 0,25 0 .17 550


PERFORMER II™H115 & H116



Air and M


orking Pressure


Construction:

Tube: Vinyl Nitrile (RMA Class A)

Reinforcement: 1-braid fiber

Cover: (BK) Neoprene (MSHA Approved)

(BU,GN, GY, RD,YW) Vinyl nitrile


-40°C to +100°C (-40°F to +212°F)

Application:• Air and water transfer• Pneumatic tools• Air tools

Markets:• Oil and gas exploration• Construction• Mining• Plastic molding

Type of Couplings:• Aeroquip® socketless• Push-on couplings• Eaton “B” Series• Eaton quick disconnect

* All sizes available in Black, Blue and Red **Green, Gray and Yellow available


PressureBurst



H20104XX 50 6 6,4 0 .25 12,7 0 .50 21,0 300 84,0 1200 0,13 0 .09 50

H20104XX-** 250R 6 6,4 0 .25 12,7 0 .50 21,0 300 84,0 1200 0,13 0 .09 250

H20104XX- 500R 6 6,4 0 .25 12,7 0 .50 21,0 300 84,0 1200 0,13 0 .09 500

H20106XX 50 10 9,5 0 .38 16,7 0 .66 21,0 300 84,0 1200 0,19 0 .13 50

H20106XX-** 250R 10 9,5 0 .38 16,7 0 .66 21,0 300 84,0 1200 0,19 0 .13 250

H20106XX 500R 10 9,5 0 .38 16,7 0 .66 21,0 300 84,0 1200 0,19 0 .13 500

H20108XX 50 12 12,7 0 .50 19,2 0 .76 21,0 300 84,0 1200 0,22 0 .15 50

H20108XX-** 250R 12 12,7 0 .50 19,2 0 .76 21,0 300 84,0 1200 0,22 0 .15 250

H20108XX- 500R 12 12,7 0 .50 19,2 0 .76 21,0 300 84,0 1200 0,22 0 .15 500

H20110XX 50 16 15,9 0 .62 23,6 0 .93 21,0 300 84,0 1200 0,34 0 .23 50

H20110XX- 250R 16 15,9 0 .62 23,6 0 .93 21,0 300 84,0 1200 0,34 0 .23 250

H20112XX 50 19 19,0 0 .75 26,3 1 .04 21,0 300 84,0 1200 0,39 0 .26 50

H20112XX- 250R 19 19,0 0 .75 26,3 1 .04 21,0 300 84,0 1200 0,39 0 .26 250

H20116XX 50 25 25,4 1 .00 34,9 1 .38 14,0 200 55,0 800 0,57 0 .38 50

H20116XX- 250R 25 25,4 1 .00 34,9 1 .38 14,0 200 55,0 800 0,57 0 .38 250


EASY COUPLE™H201



Air

and

Mul

tipur

pose

– L

ow W

orki

ng P

ress

ure


Construction:

Tube: Modified vinyl

Reinforcement: 2-spiral fiber

Cover: Pin-pricked modified rubber


-23°C to +65°C (-10°F to +150°F)

Application:• For transfer of air

and water• Air tools• Lubricated air


Type of Couplings:• Eaton “E” Series• Eaton “P” Series• Eaton “Z” Series• Barbed inserts• Quick acting or long shank• Eaton quick disconnect


*Additional colors available ** Additional lengths available on select items


PressureBurst



H26504BU- 600R 6 6,4 0 .25 12,7 0 .50 24,0 350 97,0 1400 0,13 0 .09 600

H26506BU- 600R 10 9,5 0 .38 16,3 0 .64 24,0 350 97,0 1400 0,18 0 .12 600

H26508BU- 500R 12 12,7 0 .50 19,8 0 .78 20,7 300 83,0 1200 0,25 0 .17 500

H26510BU- 500R 16 15,9 0 .62 22,2 0 .87 17,2 250 70,0 1000 0,30 0 .20 500

H26512BU- 500R 19 19,0 0 .75 26,9 1 .06 17,2 250 70,0 1000 0,39 0 .26 500

H26516BU- 200R 25 25,4 1 .00 33,3 1 .31 13,8 200 55,0 800 0,52 0 .35 200

H26520BU- 100 31 31,8 1 .25 42,9 1 .69 10,5 150 41,0 600 0,91 0 .61 100

H26524BU- 100 38 38,1 1 .50 49,2 1 .94 10,5 150 41,0 600 1,09 0 .73 100

H26532BU- 100 51 50,8 2 .00 63,5 2 .50 8,5 125 35,0 500 1,56 1 .05 100


ULTRAFORCE™H265



Air and M


orking Pressure


Construction:

Tube: PVC


Cover: Pin-pricked PVC


-23°C to +65°C (-10°F to +150°F)


and water• Air tools• Lubricated air


Type of Couplings:• Eaton “E” Series• Eaton “P” Series• Eaton “Z” Series• Barbed inserts• Quick acting or long shank• Eaton quick disconnect


* Additional colors available ** Additional lengths available on select items


PressureBurst



H27504RD-* 600R 6 6,4 0 .25 12,7 0 .50 17,2 250 70,0 1000 0,10 0 .07 600

H27506RD-* 600R 10 9,5 0 .38 15,9 0 .62 17,2 250 70,0 1000 0,18 0 .12 600

H27508RD-* 500R 12 12,7 0 .50 19,1 0 .75 17,2 250 70,0 1000 0,22 0 .15 500

H27510RD- 500R 16 15,9 0 .62 22,6 0 .89 17,2 250 70,0 1000 0,28 0 .19 500

H27512RD- 500R 19 19,0 0 .75 26,2 1 .03 17,2 250 70,0 1000 0,34 0 .23 500

H27516RD- 200R 25 25,4 1 .00 33,3 1 .31 13,8 200 55,0 800 0,51 0 .34 200

H27520RD- 100 31 31,8 1 .25 42,9 1 .69 13,8 200 55,0 800 0,77 0 .52 100

H27524RD- 100 38 38,1 1 .50 49,2 1 .94 13,8 200 55,0 800 0,91 0 .61 100

H27532RD- 100 51 50,8 2 .00 63,5 2 .50 8,5 125 26,0 375 1,35 0 .91 100


POLYFORCE II™H275



Air

and

Mul

tipur

pose

– L

ow W

orki

ng P

ress

ure


Construction:

Tube: EPDM rubber

Reinforcement: 2-fiber braid

Cover: EPDM rubber


-40°C to +82°C (-40°F to +180°F)


and water• Pneumatic tools• For spraying water-based

fertilizers and pesticides

Markets:• Metal working• Construction• Mining• Oil and gas exploration• In-plant service• Agriculture

Type of Couplings:• Eaton “U” Series• Eaton “Z” Series• Barbed inserts• Eaton quick disconnect



PressureBurst



H181204- 500R 6 6,4 0 .25 15,1 0 .59 19,0 275 75,0 1100 0,18 0 .12 500

H181206- 500R 10 9,5 0 .38 18,3 0 .72 19,0 275 75,0 1100 0,27 0 .18 500

H181208- 500R 12 12,7 0 .50 22,2 0 .87 17,2 250 70,0 1000 0,34 0 .23 500

H181210- 500R 16 15,9 0 .62 25,4 1 .00 17,2 250 70,0 1000 0,42 0 .28 500

H181212- 500R 19 19,0 0 .75 29,4 1 .16 17,2 250 70,0 1000 0,49 0 .33 500

H181216- 300R 25 25,4 1 .00 36,5 1 .44 17,2 250 70,0 1000 0,68 0 .46 300

H181220- 300R 31 31,8 1 .25 44,5 1 .75 17,2 250 70,0 1000 0,89 0 .60 300

H181224- 300R 38 38,1 1 .50 50,8 2 .00 17,2 250 70,0 1000 1,08 0 .73 300


Industrial Air/WaterH1812



Air and M


orking Pressure


Construction:

Tube: Nitrile blend

Reinforcement: 2- or 4-fiber spiral

Cover: Pin-pricked nitrile blend


-40°C to +82°C (-40°F to +180°F)

Application:• Medium duty oil-resistant• Air and water transfer

Markets:• Construction• Mining• Paper industry• Oil and gas exploration• In-plant service

Type of Couplings:• Eaton “U” Series• Eaton “Z” Series• TTC• Boss• Ground joint• Air hammer• Air king• Eaton quick disconnect


* Additional packaging available ** Additional colors available


PressureBurst



H198104RD- 600R 6 6,4 0 .25 12,7 0 .50 13,8 200 55,0 800 0,15 0 .10 183 600

H198106RD- 600R 10 9,5 0 .38 17,3 0 .68 13,8 200 55,0 800 0,22 0 .15 183 600

H198108RD- 600R 12 12,7 0 .50 20,6 0 .81 13,8 200 55,0 800 0,28 0 .19 183 600

H198112RD-* 600R 19 19,0 0 .75 30,2 1 .19 16,0 225 62,0 900 0,55 0 .37 183 600

H1982

H198204RD- 600R 6 6,4 0 .25 15,9 0 .62 20,7 300 83,0 1200 0,19 0 .13 183 600

H198206RD-** 600R 10 9,5 0 .38 18,3 0 .72 20,7 300 83,0 1200 0,27 0 .18 183 600

H198208RD-** 600R 12 12,7 0 .50 25,4 1 .00 20,7 300 83,0 1200 0,34 0 .23 183 600

H198210RD-** 600R 16 15,9 0 .62 26,2 1 .03 20,7 300 83,0 1200 0,37 0 .25 183 600

H198212RD-** 600R 19 19,0 0 .75 30,2 1 .19 20,7 300 83,0 1200 0,55 0 .37 183 600

H198216RD-** 400R 25 25,4 1 .00 36,5 1 .44 20,7 300 83,0 1200 0,96 0 .64 183 600

Air and MultipurposeGeneral Air and Water

MARATHONER™ – Non-ConductiveH1981 & H1982



*Additional packaging available ** Additional colors available

Air

and

Mul

tipur

pose

– G

ener

al A

ir a

nd W

ater


Construction:

Tube: EPDM

Reinforcement: 4-fiber spiral, -20 & -24 2-fiber braid

Cover: EPDM


-40°C to +82°C (-40°F to +180°F)

Application:• Air and water transfer• Spraying and conveying

water based liquid fertilizers and pesticides

Markets:• Construction• Mining• Rental industry• Oil and gas exploration• In-plant air service• Agriculture• Assembly/manufacturers• Paper/pulp• Ship building

Type of Couplings:• Eaton “U” Series• Barbed inserts• Quick disconnect• Eaton quick disconnect



PressureBurst



H010504RD 50 6 6,4 0 .25 15,6 0 .62 20,7 300 83,0 1200 0,16 0 .14 50

H010504RD- 600R 6 6,4 0 .25 15,6 0 .62 20,7 300 83,0 1200 0,16 0 .14 600

H010506RD 50 10 9,5 0 .38 18,0 0 .71 20,7 300 83,0 1200 0,27 0 .18 50

H010506RD- 600R 10 9,5 0 .38 18,0 0 .71 20,7 300 83,0 1200 0,27 0 .18 600

H010508RD 50 12 12,7 0 .50 22,1 0 .87 20,7 300 83,0 1200 0,34 0 .23 50

H010508RD- 600R 12 12,7 0 .50 22,1 0 .87 20,7 300 83,0 1200 0,34 0 .23 600

H010510RD- 600R 16 15,9 0 .62 25,3 1 .00 20,7 300 83,0 1200 0,45 0 .30 600

H010512RD * 50 19 19,0 0 .75 29,1 1 .15 15,5 225 62,0 900 0,55 0 .37 50

H010512RD-* 600R 19 19,0 0 .75 29,1 1 .15 15,5 225 62,0 900 0,55 0 .37 600

H010516RD * 50 25 25,4 1 .00 34,7 1 .37 13,8 200 55,0 800 0,89 0 .60 50

H010516RD-* 600R 25 25,4 1 .00 34,7 1 .37 13,8 200 55,0 800 0,89 0 .60 600

H010520BK- 300R 31 31,8 1 .25 44,5 1 .75 13,8 200 55,0 800 0,97 0 .65 300

H010524BK- 300R 38 38,1 1 .50 50,8 2 .00 13,8 200 55,0 800 1,22 0 .82 300


BOSFLEX™ A/W H0105



*Product also available in BK-Black

Air and M

ultipurpose – General A

ir and Water


Construction:

Tube: EPDM


Cover: EPDM


-40°C to +82°C (-40°F to +180°F)

Application:• Air and water transfer• Spraying and conveying

water-based liquid fertilizers and pesticides

Markets:• Construction• Mining• Rental industry• Oil and gas exploration• In-plant air service• Agriculture• Assembly/manufacturers• Paper/pulp• Ship building

Type of Couplings:• Eaton “U” Series• Barbed inserts• Quick disconnect• Eaton quick disconnect



PressureBurst



H010604BK- 600R 6 6,4 0 .25 12,4 0 .49 13,8 200 55,0 800 0,15 0 .10 600

H010604RD 50 6 6,4 0 .25 12,4 0 .49 13,8 200 55,0 800 0,15 0 .10 50

H010604RD- 600R 6 6,4 0 .25 12,4 0 .49 13,8 200 5,05 800 0,15 0 .10 600

H010606BK- 600R 10 9,5 0 .38 17,2 0 .68 13,8 200 55,0 800 0,22 0 .15 600

H010606RD 50 10 9,5 0 .38 17,2 0 .68 13,8 200 55,0 800 0,22 0 .15 50

H010606RD- 600R 10 9,5 0 .38 17,2 0 .68 13,8 200 55,0 800 0,22 0 .15 600

H010608BK- 600R 12 12,7 0 .50 20,6 0 .81 13,8 200 55,0 800 0,28 0 .19 600

H010608RD 50 12 12,7 0 .50 20,6 0 .81 13,8 200 55,0 800 0,28 0 .19 50

H010608RD- 600R 12 12,7 0 .50 20,6 0 .81 13,8 200 55,0 800 0,28 0 .19 600

H010610BK- 600R 16 15,9 0 .62 23,6 0 .93 13,8 200 55,0 800 0,42 0 .28 600

H010612RD- 600R 19 19,0 0 .75 29,1 1 .15 20,7 300 83,0 1200 0,60 0 .40 600


BOSFLEX™ A/W H0106



Air

and

Mul

tipur

pose

– G

ener

al A

ir a

nd W

ater


Construction:

Tube: EPDM rubber

Reinforcement: 2-fiber spiral

Cover: Pin-pricked EPDM rubber


-34°C to +71°C (-30°F to +160°F)

Application:• For transfer of water

Markets:• Construction• Agriculture• Turf care

Type of Couplings:• Barbed inserts• Eaton quick disconnect



PressureBurst



H198710- 50 16 15,9 0 .62 24,6 0 .97 10,5 150 31,0 450 0,34 0 .23 50

H198710- 50C 16 15,9 0 .62 24,6 0 .97 10,5 150 31,0 450 0,34 0 .23 50C

H198710- 600R 16 15,9 0 .62 24,6 0 .97 10,5 150 31,0 450 0,34 0 .23 600

H198712 50 19 19,0 0 .75 28,6 1 .13 10,5 150 31,0 450 0,45 0 .30 50

H198712- 50C 19 19,0 0 .75 28,6 1 .13 10,5 150 31,0 450 0,45 0 .30 50C

H198712- 600R 19 19,0 0 .75 28,6 1 .13 10,5 150 31,0 450 0,45 0 .30 600


Contractors WaterH1987



Air and M

ultipurpose – General A

ir and Water


Construction:

Tube: Oil-mist resistant nitrile blend

Reinforcement: High-tensile steel wire

Cover: Pin-pricked neoprene blend


-35°C to +100°C (-31°F to +212°F)

Application:• High pressure air

in mines

Markets:• Mining• Construction• Equipment rental

Type of Couplings:• Male NPT• Eaton quick disconnect


Air and MultipurposeSpecialty

Heavy Duty MSHA Mine SprayEHW028



Part No.

r


PressureBurst

PressureMinimum

Bend Radius Weight Length

mtr ft DN mm in mm in bar psi bar psi mm in kg/m lbs/ft mtr ft

EHW028-08- MXX 100 12 12,7 0 .50 24,4 0 .94 70,0 1000 207 3000 150 5 .91 0,60 0 .40 40-61 50, 100

EHW028-12- MXX 100 19 19,0 0 .75 28,0 1 .10 70,0 1000 207 3000 203 9 .06 0,61 0 .41 40-61 50, 100

EHW028-16- MXX 100 25 25,4 1 .00 34,3 1 .35 70,0 1000 207 3000 305 12 .01 0,82 0 .55 40-61 50, 100

EHW028-20- MXX 100 31 31,8 1 .25 41,4 1 .63 70,0 1000 207 3000 385 15 .16 1,10 0 .74 40-61 50, 100

EHW028-24- MXX 100 38 38,1 1 .50 48,0 1 .89 70,0 1000 207 3000 455 17 .91 1,41 0 .95 40-61 50, 100

EHW028-32- MXX 100 51 50,8 2 .00 62,0 2 .44 70,0 1000 207 3000 610 24 .02 2,19 1 .47 40-61 50, 100

EHW028-40- MXX 100 60 63,5 2 .50 82,0 3 .23 70,0 1000 207 3000 765 30 .12 3,93 2 .64 40-61 50, 100

Air

and

Mul

tipur

pose

– S

peci

alty


Construction:

Tube: Modified vinyl

Reinforcement: 4-fiber spiral

Cover: PVC/nitrile blend


-28°C to +66°C (-20°F to +150°F)

Application:• For transfer of

air and water• For high pressure

air tools

Markets:• Construction• Mining• Food processing

Type of Couplings:• Eaton “U” Series• Eaton “Z” Series• Long shank• Eaton quick disconnect



PressureBurst



H157112 50 19 19,0 0 .75 30,2 1 .19 28 400 110 1600 0,60 0 .40 50

H157112-100 100 19 19,0 0 .75 30,2 1 .19 28 400 110 1600 0,60 0 .40 100

Air and MultipurposeSpecialty

MineforceH1571



Air and M

ultipurpose – Specialty

®

Industrial Hose

Power Transmission Belts

Conveyor BeltingDucting

Industrial Hose

Rubber Roll/Roll Coverings

Rubber BandsAutomotive Aftermarket HoseBudding Strips

THERMOID INDUSTRIAL RUBBER PRODUCTS...

2013/2014

®

800/543-8070 Fax 800/423-4354 www.hbdthermoid.comINDUSTRIAL RUBBER PRODUCTS INDEX ALPHABETICAL – By Hose ApplicationINDUSTRIAL RUBBER PRODUCTS INDEX ALPHABETICAL – By Hose Application

5

Product information is subject to change. For full details, visit our website or contact Customer Service.

AIR/MULTIPURPOSEAIRFLEX™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 BLACK MAX® M.R.O. . . . . . . . . . . . . . . . . . . . . . . 40DURA-RED™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38EXCALIBUR™ MULTIPURPOSE . . . . . . . . . . . . 45FLEX-LOC™ PUSH-ON . . . . . . . . . . . . . . . . . . . . 43FLEX-LOC™ 300 PUSH-ON . . . . . . . . . . . . . . . . 44GLACIER™ MULTIPURPOSE . . . . . . . . . . . . . . . 46GOLDENAIR® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40GREEN GP/OXYGEN . . . . . . . . . . . . . . . . . . . . . . 41HERCULES® II . . . . . . . . . . . . . . . . . . . . . . . . . . . 45HERCULES® 500 MULTIPURPOSE . . . . . . . . . . 46HERCULES® 1000 MULTIPURPOSE . . . . . . . . . 46MAINLINER® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37MAXECON™/GP . . . . . . . . . . . . . . . . . . . . . . . . . . 38MAXECON™ PLUS . . . . . . . . . . . . . . . . . . . . . . . 39RADIAL AIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41VALUFLEX®/GS - BLACK . . . . . . . . . . . . . . . . . . . 35VALUFLEX®/GS - GREEN, YELLOW, BLUE . . . 36VALUFLEX®/GS - RED . . . . . . . . . . . . . . . . . . . . . 34VERSICON® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39ZEPHYR™ AIR . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 CoupledAIR POWER™ JACKHAMMER . . . . . . . . . . . . . . 42 RED AIR TOOL COUPLED . . . . . . . . . . . . . . . . . 42 AUTOMOTIVE/MARINE COOLANTAutomotive – Air Brake, Fuel, Heater & CoolantAIR BRAKE, TYPE A - SAE J1402 &

DOT FMVSS 106 . . . . . . . . . . . . . . . . . . . . . . . . 48BLACK STANDARD HEATER & BLACK OEM

HEATER SAE 20R3, CLASS D2 TYPE . . . . . . 48 FUEL LINE, VAPOR EMISSION & CRANKCASE

VENTILATION - Similar to SAE 30R7 . . . . . . . . 49GENERAL PURPOSE COOLANT & DISCHARGE

100 & 100A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52HEAVY DUTY COOLANT & DISCHARGE

101 & 101B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 1158 SOFTWALL AROMATIC FUEL SAE 30R2

TYPE 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 2007 STANDARD WALL 3/16" COOLANT

SAE 20R1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 552012 STANDARD WALL 3/16" COOLANT

SAE 20R1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 3003 SILICONE COOLANT STANDARD

WALL 3/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 3004 SILICONE COOLANT HEAVY WALL1/4" . 57 3005 SILICONE COOLANT HEATER

SAE 20R3 CLASS A . . . . . . . . . . . . . . . . . . . . . . 58 3009 SILCOFLEX™ SILICONE COOLANT

HARD WALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 587318 SOFT WALL FUEL FILL SAE 30R7 . . . . . . 50Marine – Coolant, Fuel & Wet ExhaustTYPE 2458 MARINE - Black Cover . . . . . . . . . . . 612400 WET EXHAUST SAE J2006 . . . . . . . . . . . . 59 2428 MARINER PREMIUM WET EXHAUST

SAE J2006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607910 BELLOWSFLEX™ “A” COOLANT,

MARINE, FUEL . . . . . . . . . . . . . . . . . . . . . . . . . . 62 7951 SAE 100R4 HYDRAULIC

RETURN/SUCTION . . . . . . . . . . . . . . . . . . . . . . 63 CHEMICALATLAS™ ACID DISCHARGE . . . . . . . . . . . . . . . . 65 ATLAS™ ACID SUCTION & DISCHARGE . . . . . 65 COMMANDER® ACID DISCHARGE . . . . . . . . . . 66 COMMANDER® ACID SUCTION & DISCHARGE 66 TRANSPORTER® CHEMICAL B . . . . . . . . . . . . . 67 TRANSPORTER® CHEMICAL H . . . . . . . . . . . . . 67 TRANSPORTER® CHEMICAL V . . . . . . . . . . . . . 68 TRANSPORTER® MULTI-CHEM® . . . . . . . . . . . 68TRANSPORTER® ULTRA-CHEM™ . . . . . . . . . . 64 DOCK LOADINGBLACK RACER™ OS & D . . . . . . . . . . . . . . . . . . 69 CHEMICAL & SOLVENT - UHMW

POLYETHYLENE LINING (Smooth Bore) . . . . . 69 HY-FLEX™ 200/275/300 DOCK -

NYLON/UHMWPE TUBE (Rough Bore) . . . . . . 70 SAFETYFLEX® . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

SAFETYFLEX® WATER JETTING . . . . . . . . . . . . 71 SUBMARINE 225 PSI (Smooth Bore) . . . . . . . . . 72 TANKMASTER® HOT ASPHALT (Smooth Bore) 72 TANKMASTER® K200 OIL SUCTION &

DISCHARGE 200 PSI (Smooth Bore) . . . . . . . . 73TANKMASTER® NBR LINING 200

(Smooth Bore) . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 TANKMASTER® OIL DISCHARGE

(Smooth Bore) . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 TANKMASTER® 200/225 - FKM LINING

(Smooth Bore) . . . . . . . . . . . . . . . . . . . . . . . . . . . 74FOOD INDUSTRYFISH SUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 KOROBRAID® TUBING . . . . . . . . . . . . . . . . . . . . 75 KOROKLEAR® TUBING . . . . . . . . . . . . . . . . . . . . 76 RADIAL FLEX® CLEAR FOOD PROCESSING . 77 TRANSPORTER® FOOD DISCHARGE . . . . . . . 77TRANSPORTER® FOOD SUCTION -

Gray Smooth Cover . . . . . . . . . . . . . . . . . . . . . . . 78 TRANSPORTER® FOOD SUCTION -

White Corrugated Cover . . . . . . . . . . . . . . . . . . . 78 TRANSPORTER® GRAY SHADOW

FOOD SUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 79 TYPE 95 FOOD - Gray Cover . . . . . . . . . . . . . . . . 79 TYPE 96 FOOD - Gray Cover . . . . . . . . . . . . . . . . 80 TYPE 120 FOOD - Gray Cover . . . . . . . . . . . . . . . 80 MATERIAL HANDLINGCONVERTAPIPE® - Black Cover . . . . . . . . . . . 89-90DREDGING SLEEVES . . . . . . . . . . . . . . . . . . . . . 81 RADIAL FLEX® AIR DUCTING - BLUE . . . . . . . 81SAND & CEMENT DISCHARGE - Black Cover . 83 SAND SUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . 82 TRANSPORTER® HOT AIR BLOWER . . . . . . . . 83 TRANSPORTER® MATERIAL DISCHARGE . . . 84 TRANSPORTER® MATERIAL SUCTION . . . . . . 84 TRANSPORTER® OIL FIELD VACUUM . . . . . . . 85 TRANSPORTER® PLASTER & CONCRETE . . . 85 TRANSPORTER® TYPE 120 DRY CEMENT . . . 86 TYPE 101 MATERIAL HANDLING -

Black Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 TYPE 102 MATERIAL HANDLING . . . . . . . . . . . . 87 TYPE 103 EXHAUST - Black Cover . . . . . . . . . . . 87 TYPE 105 COLLECTOR - Black Cover . . . . . . . . 88 Flexible Connectors & EndsFLEXLOCK™ (Duck & Rubber) CONNECTORS 91 FLEXLOCK™ (Duck & Rubber) ENDS . . . . . . . . 91 FLEXSEAL™ (Beaded) CONNECTORS . . . . . . . 92 FLEXSEAL™ (Beaded) ENDS . . . . . . . . . . . . . . . 92 PETROLEUM/LPGPetroleumBOTTOM LOADING . . . . . . . . . . . . . . . . . . . . . . . 93 FUEL TRANSFER 150 . . . . . . . . . . . . . . . . . . . . . 95HI-VAC™ CO-AX® . . . . . . . . . . . . . . . . . . . . . . . . . 99 HI-VAC™-S CO-AX® . . . . . . . . . . . . . . . . . . . . . . . 99 HI-VAC™ WHIP . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 PREMIER FARM TANK . . . . . . . . . . . . . . . . . . . . . 95 PUMPFLEX® I - Softwall . . . . . . . . . . . . . . . . . . . . 96 PUMPFLEX® II - Hardwall . . . . . . . . . . . . . . . . . . . 97 PUMPFLEX® II - Jumper . . . . . . . . . . . . . . . . . . . . 98 PUMPFLEX® MARINA - Softwall . . . . . . . . . . . . . 98THERMOID® FUEL OIL DELIVERY . . . . . . . . . . 94 TRANSPORTER® BLACK TANK TRUCK . . . . . . 102 TRANSPORTER® EBONITE™ CORRUGATED

TANK TRUCK . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 TRANSPORTER® EBONITE™ LT CORRUGATED

TANK TRUCK . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 TRANSPORTER® FLEX-DEVIL™ . . . . . . . . . . . . 103TRANSPORTER® L.W. CORRUGATED

TANK TRUCK . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 TRANSPORTER® RED TANK TRUCK . . . . . . . . 102 TRANSPORTER® VAPOR RECOVERY . . . . . . . 105 TRANSPORTER® VAPOR-LOC™TANK TRUCK . 104 TRANSPORTER® X.L.W. CORRUGATED

TANK TRUCK . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 TYPE 924 PETROLEUM TRANSFER . . . . . . . . . 103VAPOR-LOC™ FUEL LINE (30R7) . . . . . . . . . . . 49VAPOR-LOC™ FUEL INJECTION . . . . . . . . . . . 50

LP GasLP GAS/PROPANE TANKMASTER® . . . . . . . . . . 105POLAR-FLEX/CGA TYPE 1

BUTANE-PROPANE - Thermocure . . . . . . . . . . 106 TYPE 65 BUTANE-PROPANE . . . . . . . . . . . . . . . 107 TYPE 75 BUTANE-PROPANE - Thermocure . . . 107 SPECIAL APPLICATIONSELEPHANT TRUNK . . . . . . . . . . . . . . . . . . . . . . . . 109 FURNACE DOOR (Wire Braid) . . . . . . . . . . . . . . . 109HIGHFLEX GRADE C ROTARY VIBRATOR

DRILLING & DECOKER . . . . . . . . . . . . . . . . . . . 112 HIGHFLEX GRADE D ROTARY DRILLING . . . . 111SLIM HOLE ROTARY DRILLING . . . . . . . . . . . . . 114 THERMOID MUD PUMP SUCTION . . . . . . . . . . 113TRANSPORTER® GP FRAC HOSE . . . . . . . . . . 110 TRANSPORTER® HOT TAR & ASPHALT . . . . . . 108TRANSPORTER® OIL FIELD FRACTURING . . 110 Sand BlastBLAST-FLEX™ SAND BLAST . . . . . . . . . . . . . . . 113 WRAPPED SAND BLAST . . . . . . . . . . . . . . . . . . 113 STEAMBURSTPROOF™ OIL RESISTANT STEAM -

Thermocure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 BURSTPROOF™ REGULAR STEAM -

Thermocure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 PILE DRIVER STEAM . . . . . . . . . . . . . . . . . . . . . . 115 WATER/FIREWaterBLACK HEAVY-DUTY CONTRACTORS

WATER - Coupled . . . . . . . . . . . . . . . . . . . . . . . . 116 BLACK HEAVY-DUTY WATER - Coupled . . . . . . 116 BLACK MUNICIPAL WATER - Coupled . . . . . . . . 117 GREEN GARDEN - Coupled . . . . . . . . . . . . . . . . 119 WASHING MACHINE DRAIN . . . . . . . . . . . . . . . . 118 Water DischargeBF-10 PVC WATER DISCHARGE - BLUE . . . . . 121CASCADE PAPER MILL . . . . . . . . . . . . . . . . . . . . 120 NYLAIR 44 WATER DISCHARGE . . . . . . . . . . . . 118 PAPER MILL - TYPE 1788 - Gray Cover . . . . . . . 119 PVC WATER DISCHARGE STANDARD DUTY

BLUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 TRANSPORTER® WATER DISCHARGE . . . . . . 122 WD-150 WATER DISCHARGE . . . . . . . . . . . . . . 123 Water SuctionPAPER MACHINE SUCTION BOX . . . . . . . . . . . 125RADIAL FLEX® CONTRACTORS . . . . . . . . . . . . 126RADIAL FLEX® EXTRA HEAVY DUTY

GREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127RADIAL FLEX® HEAVY DUTY YELLOW . . . . . . 128RADIAL FLEX® STANDARD DUTY CLEAR . . . . 126RADIAL FLEX® STANDARD DUTY CLEAR

CORRUGATED . . . . . . . . . . . . . . . . . . . . . . . . . . 127RADIAL FLEX® STANDARD DUTY

CORRUGATED GREEN . . . . . . . . . . . . . . . . . . . 128 RADIAL FLEX® STANDARD DUTY GREEN . . . 125TRANSPORTER® WATER SUCTION &

DISCHARGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 WashdownDARI-PREEN CREAMERY . . . . . . . . . . . . . . . . . . 129 SANI-WHITE™ WASHDOWN . . . . . . . . . . . . . . . 129 FireALARM® BOOSTER - Thermocure . . . . . . . . . . . 130 FIRE EXTINGUISHER - UL92 . . . . . . . . . . . . . . . 132 WELDINGSINGLE LINE CORRUGATED WELDING,

GRADE R, TYPE S . . . . . . . . . . . . . . . . . . . . . . . 134SINGLE LINE CORRUGATED WELDING,

GRADE T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136TULINE WELDING, GRADE R . . . . . . . . . . . . . . . 131 TULINE WELDING, GRADE R -

Cut & Coupled (B&B) . . . . . . . . . . . . . . . . . . . . . 132 TULINE WELDING, GRADE T . . . . . . . . . . . . . . . 133 TULINE WELDING, GRADE T -

Cut & Coupled (B&B) . . . . . . . . . . . . . . . . . . . . . 134

ALPHABETICAL – By Hose Application

Indicates hose product available in VAPOR-LOC™ version.

800/543-8070 Fax 800/423-4354 www.hbdthermoid.com

AIR/MULTIPURPOSE

AIR/MULTIPURPOSE

34


VALUFLEX®/GS – REDValuflex/GS is one of the finest multipurpose air and water hose available, anywhere. RedValuflex provides job/color coding possibilities forsafety and other considerations. Valuflex is avery economical general service air and waterhose. It can be used in numerous industrial, agricultural and construction applications whereoil is not a factor. Valuflex is not only lightweight,but also very flexible and easy to handle due tomultiple plies of rubber and spiral reinforcedpolyester fiber. Available in a wide variety ofsizes, Valuflex provides constant working pres-sures of 150, 200, 250, or 300 psi.It has an EPDM tube and cover that resistsabrasion, heat and ozone. This hose is not foruse as a steam hose.

Cover Color: RedOil Resistance: LimitedConstruction:

Tube: EPDMCover: EPDMReinforcement: Spiral polyester yarn

Temperature Range: -40°F to +212°F-40°C to +100°C

Packaging: Reels or †50 ft. length – 1 per carton

Resistance:

Branding:

Thermoid Valuflex/GS Size PSI WPMade In USA Month/Day/Year-DOM

▲ = Make To Order (MTO)† = 50 ft. length –1 per carton

Product Nominal I.D. Nominal O.D. Reinforcement Working Pressure Min. Bend Radius WeightNumber (inches) (mm) (inches) (mm) Spirals (psi) (Mpa) (inches) (mm) (lb/ft) (Kg/m)

00114503200▲ 3/16 4.76 0.44 11.11 2 200 1.38 0.08 0.1200114504100▲ 1/4 6.35 0.49 12.45 2 150 1.03 1.50 38.10 0.08 0.1200114504200 1/4 6.35 0.49 12.45 2 200 1.38 1.50 38.10 0.08 0.1200114504300 1/4 6.35 0.50 14.22 2 250 1.72 1.50 38.10 0.08 0.1200114504400 1/4 6.35 0.50 15.75 2 300 2.07 1.50 38.10 0.08 0.1200114505200 5/16 7.94 0.58 14.73 2 200 1.38 2.00 50.80 0.09 0.1300114505400 5/16 7.94 0.58 15.75 2 300 2.07 2.00 50.80 0.09 0.1300114506100▲ 3/8 9.53 0.69 17.53 2 150 1.03 2.25 57.15 0.15 0.2200114506200 3/8 9.53 0.69 17.53 2 200 1.38 2.25 57.15 0.15 0.2200114506251† 3/8 9.53 0.69 17.53 2 200 1.38 2.25 57.15 0.15 0.2200114506300 3/8 9.53 0.69 17.53 2 250 1.72 2.25 57.15 0.15 0.2200114506400 3/8 9.53 0.69 17.53 2 300 2.07 2.25 57.15 0.15 0.2200114506451† 3/8 9.53 0.69 17.53 2 300 2.07 2.25 57.15 0.15 0.2200114508100 1/2 12.70 0.81 20.64 2 150 1.03 3.00 76.20 0.20 0.3000114508200 1/2 12.70 0.81 20.64 4 200 1.38 3.00 76.20 0.25 0.3700114508300 1/2 12.70 0.84 21.43 4 250 1.72 3.00 76.20 0.25 0.3700114508400 1/2 12.70 0.84 21.43 4 300 2.07 3.00 76.20 0.25 0.3700114510100 5/8 15.88 0.93 23.62 2 150 1.03 3.75 95.25 0.24 0.3600114510200 5/8 15.88 0.93 23.62 4 200 1.38 3.75 95.25 0.30 0.4500114510300 5/8 15.88 1.00 25.40 4 250 1.72 3.75 95.25 0.30 0.4500114510400 5/8 15.88 1.00 25.40 4 300 2.07 3.75 95.25 0.30 0.4500114512100 3/4 19.05 1.12 28.45 4 150 1.03 4.50 114.30 0.34 0.5100114512151†▲ 3/4 19.05 1.12 28.45 4 150 1.03 4.50 114.30 0.34 0.5100114512200 3/4 19.05 1.15 29.21 4 200 1.38 4.50 114.30 0.38 0.5700114512251† 3/4 19.05 1.15 29.21 4 200 1.38 4.50 114.30 0.38 0.5700114512500 3/4 19.05 1.15 29.21 4 250 1.72 4.50 114.30 0.38 0.5700114512550† 3/4 19.05 1.15 29.21 4 250 1.72 4.50 114.30 0.38 0.5700114512400 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.41 0.6100114512451† 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.41 0.6100114516200 1 25.40 1.37 34.80 4 150 1.03 7.00 177.80 0.43 0.6400114516300 1 25.40 1.37 34.80 4 200 1.38 7.00 177.80 0.51 0.7600114516400 1 25.40 1.37 34.80 4 300 1.38 7.00 177.80 0.51 0.7600114520200 1-1/4 31.75 1.75 44.45 4 200 1.38 8.75 222.25 0.81 1.2100114524200 1-1/2 38.10 2.00 50.80 4 200 1.38 10.50 266.70 0.95 1.4100114532200 2 50.80 2.55 64.77 4 200 1.38 14.00 355.60 1.13 1.68

N/A N/A

For Hose and Hose Coupling Guide Information, see catalog pages 32 and 33.For Made to Order Hose, Customer Order Form, see catalog page 137.For Hose and Hose Coupling Guide Information, see catalog pages 32 and 33.For Made to Order Hose, Customer Order Form, see catalog page 137.

VALUFLEX®/GS – BLACKValuflex/GS is one of the finest multipurpose airand water hose available, anywhere. BlackValuflex provides job/color coding possibilities forsafety and other considerations. Valuflex is avery economical general service air and waterhose. It can be used in numerous industrial,agricultural and construction applications whereoil is not a factor. Valuflex is not only lightweight,but also very flexible and easy to handle due tomultiple plies of rubber and spiral reinforcedpolyester fiber. Available in a wide variety ofsizes, Valuflex provides constant working pres-sures of 150, 200, 250 or 300 psi.It has an EPDM tube and cover that resistsabrasion, heat and ozone. This hose is not foruse as a steam hose.

Cover Color: BlackOil Resistance: LimitedConstruction:




Resistance:

Branding:

Thermoid Valuflex/GS Size PSI WPMade In USA Month/Day/Year-DOM


00114603200▲ 3/16 4.76 0.44 11.11 2 200 1.38 0.07 0.1100114604100▲ 1/4 6.35 0.49 12.45 2 150 1.03 1.50 38.10 0.08 0.1200114604200 1/4 6.35 0.49 12.45 2 200 1.38 1.50 38.10 0.08 0.1200114604300▲ 1/4 6.35 0.50 14.22 2 250 1.72 1.50 38.10 0.08 0.1200114604400 1/4 6.35 0.50 15.75 2 300 2.07 1.50 38.10 0.08 0.1200114605200 5/16 7.94 0.58 14.73 2 200 1.38 2.00 50.80 0.09 0.1300114605400 5/16 7.94 0.58 15.75 2 300 2.07 2.00 50.80 0.09 0.1300114606100▲ 3/8 9.53 0.69 17.53 2 150 1.03 2.25 57.15 0.15 0.2200114606200 3/8 9.53 0.69 17.53 2 200 1.38 2.25 57.15 0.15 0.2200114606300▲ 3/8 9.53 0.69 17.53 2 250 1.72 2.25 57.15 0.15 0.2200114606400 3/8 9.53 0.69 17.53 2 300 2.07 2.25 57.15 0.15 0.2200114608100 1/2 12.70 0.81 20.64 2 150 1.03 3.00 76.20 0.19 0.2800114608200 1/2 12.70 0.81 20.64 4 200 1.38 3.00 76.20 0.24 0.3600114608300▲ 1/2 12.70 0.84 21.43 4 250 1.72 3.00 76.20 0.24 0.3600114608400 1/2 12.70 0.84 21.43 4 300 2.07 3.00 76.20 0.24 0.3600114610100 5/8 15.88 0.93 23.62 2 150 1.03 3.75 95.25 0.23 0.3400114610200 5/8 15.88 0.93 23.62 4 200 1.38 3.75 95.25 0.29 0.4300114610400 5/8 15.88 1.00 25.40 4 300 2.07 3.75 95.25 0.29 0.4300114612100 3/4 19.05 1.12 28.45 4 150 1.03 4.50 114.30 0.33 0.4900114612151†▲ 3/4 19.05 1.12 28.45 4 150 1.03 4.50 114.30 0.33 0.4900114612200 3/4 19.05 1.15 29.21 4 200 1.38 4.50 114.30 0.36 0.5400114612251†▲ 3/4 19.05 1.15 29.21 4 200 1.38 4.50 114.30 0.36 0.5400114612300▲ 3/4 19.05 1.15 29.21 4 250 1.72 4.50 114.30 0.36 0.5400114612400 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.40 0.6000114612454†▲ 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.40 0.6000114616100 1 25.40 1.37 34.80 4 150 1.03 7.00 177.80 0.41 0.6100114616200 1 25.40 1.37 34.80 4 200 1.38 7.00 177.80 0.49 0.7300114616400 1 25.40 1.43 36.32 4 300 2.07 7.00 177.80 0.49 0.7300114620200 1-1/4 31.75 1.75 44.45 4 200 1.03 8.75 222.25 0.79 1.1800114624200 1-1/2 38.10 2.00 50.80 4 200 1.03 10.50 266.70 0.90 1.3400114632200 2 50.80 2.55 64.77 4 200 1.03 14.00 355.60 1.08 1.61

800/543-8070 Fax 800/423-4354 www.hbdthermoid.comAIR/M

ULTIPURPOSEAIR/M

ULTIPURPOSE

35



N/A N/A


AIR/MULTIPURPOSE

AIR/MULTIPURPOSE

36


VALUFLEX®/GS – GREEN, YELLOW, BLUEValuflex/GS is one of the finest multi-purpose airand water hose available, anywhere. Valuflexprovides job/color coding possibilities for safetyand other considerations. Valuflex is a veryeconomical general service air and water hose.It can be used in numerous industrial, agriculturaland construction applications where oil is not afactor. Valuflex is easy to handle and very flexibledue to its multi-spiral layers of durable reinforcingpolyester yarn. Available in a wide variety of sizes,Valuflex provides constant working pressures of150, 200, 250 or 300 psi. It has an EPDM tubeand cover that resists abrasion, heat and ozone.This hose is not for use as a steam hose.

Cover Color: Green, Yellow or BlueOil Resistance: LimitedConstruction:




Resistance:

Branding:

Thermoid Valuflex/GS Size PSI WPMade In USA



Green00114806300 3/8 9.53 0.69 17.53 2 250 1.73 2.25 57.15 0.18 0.2700114808300 1/2 12.70 0.84 21.34 4 250 1.73 3.00 76.20 0.25 0.3700114808400▲ 1/2 12.70 0.84 21.34 4 300 2.07 3.00 76.20 0.25 0.3700114812500 3/4 19.05 1.15 29.21 4 250 1.73 4.50 114.30 0.37 0.5500114812400 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.41 0.6100114812551† 3/4 19.05 1.15 29.21 4 250 1.73 4.50 114.30 0.37 0.5500114812455†▲ 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.41 0.6100114816300▲ 1 25.40 1.43 36.20 4 250 1.73 7.00 177.80 0.54 0.8000114816400 1 25.40 1.43 36.20 4 300 2.07 7.00 177.80 0.54 0.80

Yellow00114912356▲ 3/4 19.05 1.15 29.21 4 250 1.73 4.50 114.30 0.37 0.5500114912351†▲ 3/4 19.05 1.15 29.21 4 250 1.73 4.50 114.30 0.37 0.55

Blue00115008300▲ 1/2 12.70 0.84 21.43 4 250 1.73 3.00 76.20 0.25 0.3700115012300 3/4 19.05 1.15 29.21 4 250 1.73 4.50 114.30 0.37 0.5500115012355† 3/4 19.05 1.15 29.21 4 250 1.73 4.50 114.30 0.37 0.5500115016300▲ 1 25.40 1.43 36.20 4 250 1.73 7.00 177.80 0.54 0.80

AIRFLEX™ Airflex hose is the quality choice for anyapplication where a medium oil resistant tube isneeded to lubricate air tools. Airflex has aworking pressure to 300 psi in a full range ofsizes from 1/4" I.D. to 3/4" I.D. It has a highlyvisible yellow cover that is weather, ozone andabrasion resistant. Airflex has a durable 4-spiralconstruction to handle abuse orientedapplications and a yellow cover for codingapplications. Stock the quality choice, the rightchoice, the highly visible, Airflex hose.

Cover Color: YellowOil Resistance: MediumConstruction:

Tube: EPDM, RMA Class CCover: EPDM - LimitedReinforcement: Spiral polyester yarn



Resistance:

Branding:

Thermoid Size WP Airflex Made In USA



00235504400▲ 1/4 6.35 0.62 15.75 4 300 2.07 1.50 38.10 0.15 0.2200235506400 3/8 9.53 0.69 17.53 4 300 2.07 2.25 57.15 0.18 0.2700235508400 1/2 12.70 0.84 21.34 4 300 2.07 3.00 76.20 0.25 0.3700235512400 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.37 0.5500235512451† 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.37 0.55


ULTIPURPOSEAIR/M

ULTIPURPOSE

37


MAINLINER®

Mainliner is designed to handle the oily mistsused to lubricate pneumatic tools. This hose isan excellent choice for use with pneumatic toolsthroughout the industry. It features a medium oil-resistant tube with multi-spiral polyester reinforcement that keeps it flexible even inextreme temperatures. The durable cover resistsabrasion, cracking, weathering and ozone.Mainliner offers constant working pressures of200, 250 and 300 psi. Mainliner is the qualityvalue choice for a general service hose for oily,pneumatic equipment lubrication.Note: Not recommended for handling fuels.

Cover Color: RedOil Resistance: MediumConstruction:

Tube: EPDM, RMA Class CCover: EPDM - LimitedReinforcement: Spiral polyester yarn



Resistance:

Branding:

Thermoid Mainliner Size PSI WPMade In USA


00225504200▲ 1/4 6.35 0.49 12.45 2 200 1.38 1.50 38.10 0.09 0.1300225504400 1/4 6.35 0.62 15.75 4 300 2.07 1.50 38.10 0.15 0.2200225505400 5/16 7.94 0.62 15.75 4 300 2.07 2.00 50.80 0.14 0.2100225506200▲ 3/8 9.53 0.69 17.53 2 200 1.38 2.25 57.15 0.15 0.2200225506400 3/8 9.53 0.69 17.53 2 300 2.07 2.25 57.15 0.18 0.2700225508200▲ 1/2 12.70 0.81 20.64 2 200 1.38 3.00 76.20 0.19 0.2800225508400 1/2 12.70 0.84 21.34 4 300 2.07 3.00 76.20 0.25 0.3700225510400 5/8 15.88 1.00 25.40 4 300 2.07 3.75 95.25 0.30 0.4500225512300 3/4 19.05 1.15 29.21 4 250 1.72 4.50 114.30 0.37 0.5500225512351†▲ 3/4 19.05 1.15 29.21 4 250 1.72 4.50 114.30 0.37 0.5500225512400 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.37 0.5500225512451† 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.37 0.5500225516200▲ 1 25.40 1.37 34.80 4 200 1.38 7.00 177.80 0.42 0.6200225516400 1 25.40 1.43 36.20 4 300 2.07 7.00 177.80 0.50 0.7400225520200 1-1/4 31.75 1.75 44.45 4 200 1.38 8.75 222.25 0.81 1.2100225524200 1-1/2 38.10 2.00 50.80 4 200 1.38 10.50 266.70 0.94 1.4000225532200 2 50.80 2.55 64.77 4 200 1.38 14.00 355.60 1.12 1.67



AIR/MULTIPURPOSE

AIR/MULTIPURPOSE

38


DURA-RED™Dura-Red is the premium non-conductivemultipurpose hose that handles oil mist, air,water and mild chemicals. Not recommendedfor fuels. Meets electrical resistance portion ofthe Alcoa Potroom air and water specs (30.4.2).Dura-Red has 4-spiral, 300 psi construction tohandle abuse oriented applications.

Resistance:

Branding:

Thermoid Dura-Red™ Non-conductive Size PSI WP Made In USA


Cover Color: RedOil Resistance: MediumConstruction: Non-conductive

Tube: EPDM, RMA Class CCover: EPDM Class CReinforcement: Spiral polyester yarn


Packaging: Reels or †50 ft. length – 1 per carton (3/4" I.D. only)


00275504400▲ 1/4 6.35 0.62 15.75 4 300 2.07 1.50 38.10 0.16 0.2400275506400 3/8 9.53 0.71 18.03 4 300 2.07 2.25 57.15 0.18 0.2700275508400 1/2 12.70 0.84 21.34 4 300 2.07 3.00 76.20 0.25 0.3700275512400 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.38 0.5700275512451†▲ 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.38 0.5700275516400 1 25.40 1.43 36.20 4 300 2.07 7.00 177.80 0.51 0.7600275520300▲ 1-1/4 31.75 1.75 44.45 4 300 2.07 8.75 222.25 0.72 1.07

MAXECON™/GPMaxecon is an excellent general purpose air and water service hose that can be used by allindustries. It is non-conductive and offers amedium-high oil resistance. Maxecon offersdependable and solid performance with twoworking pressures: 250 or 300 psi in varyingsizes up to 1-1/2" I.D. Its durable cover resistsabrasion, weathering and ozone. Maxecon’smulti-spiral polyester yarn reinforcement makesthis hose durable, flexible and helps eliminatekinks. Maxecon is the ideal hose for use inmining, steel or petroleum applications.Note: Not recommended for fuel applications.

Cover Color: RedOil Resistance: Cover (Medium) – Tube (High)Construction: Non-conductive

Tube: Nitrile blend, RMA Class ACover: Nitrile blend, RMA Class BReinforcement: Spiral polyester yarn

Temperature Range: -20°F to +160°F or 180°F (intermittent)-29°C to +71°C or 82°C (intermittent)

Packaging: Reels or †50 ft. length – 1 per carton (3/4" I.D. only)

Resistance:

Branding:

Thermoid Maxecon /GP Non-conductive Size PSI WPMade In USA


00336504300 1/4 6.35 0.50 12.70 2 250 1.72 1.50 38.10 0.08 0.1200336504400 1/4 6.35 0.62 15.75 4 300 2.07 1.50 38.10 0.13 0.1900336505300 5/16 7.94 0.63 15.88 2 250 1.72 2.00 50.80 0.14 0.2100336506300 3/8 9.53 0.69 17.53 4 250 1.72 2.25 57.15 0.17 0.2500336506400 3/8 9.53 0.69 17.53 4 300 2.07 2.25 57.15 0.17 0.2500336508300 1/2 12.70 0.84 21.34 4 250 1.72 3.00 76.20 0.24 0.3600336508400 1/2 12.70 0.84 21.34 4 300 2.07 3.00 76.20 0.24 0.3600336510400 5/8 15.88 1.00 25.40 4 300 2.07 3.75 95.25 0.28 0.4200336512300 3/4 19.05 1.15 29.21 4 250 1.72 4.50 114.30 0.36 0.5400336512400 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.40 0.6000336512454† 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.40 0.6000336516300 1 25.40 1.43 36.20 4 250 1.72 7.00 177.80 0.49 0.7300336516400 1 25.40 1.43 36.20 4 300 2.07 7.00 177.80 0.58 0.8600336520300 1-1/4 31.75 1.78 45.24 4 250 1.72 8.75 222.25 0.78 1.1600336524300 1-1/2 38.10 2.03 51.59 4 250 1.72 10.50 266.70 0.90 1.34

† = 50 ft. length –1 per carton


ULTIPURPOSEAIR/M

ULTIPURPOSE

39


VERSICON®

Versicon is a premium, non-conductive hosedesigned to stand up to the tough workingconditions found in shipyards, steel processingautomotive plants and construction industries.The NBR tube can convey oil, diesel, kerosene,fuel oil and other petroleum based products.Its 4-spiral polyester reinforcing cords providestrength and flexibility even in extreme temperatures. The synthetic cover resists oil andsolvents and also cracking, abrasion and ozone.Versicon meets the standard for conductivitywhich makes it ideal for the aluminum reductionindustry as well as other applications where ahigh degree of electrical non-conductivity isrequired. Versicon provides smooth, easyhandling and offers a constant pressure of either250 or 300 psi 1/4" through the 1-1/2" sizes.Versicon is kink resistant, crush proof and is theideal choice for harsh, demanding applications.Note: Not recommended for a variety ofunleaded gasoline.

Cover Color: RedOil Resistance: HighConstruction: Non-conductive

Tube: NBR, RMA Class ACover: Nitrile/PVC Class AReinforcement: Spiral polyester yarn


Packaging: Reels

Resistance:

Branding:

Thermoid Versicon Non-conductive Size WPMade In USA


00447504400 1/4 6.35 0.62 15.75 4 300 2.07 1.50 38.10 0.16 0.2400447506400 3/8 9.53 0.69 17.53 4 300 2.07 2.25 57.15 0.18 0.2700447508400 1/2 12.70 0.84 21.34 4 300 2.07 3.00 76.20 0.25 0.3700447512400 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.42 0.6200447516400 1 25.40 1.43 36.20 4 300 2.07 7.00 177.80 0.63 0.9400447520300 1-1/4 31.75 1.78 45.24 4 250 1.72 8.75 222.25 0.81 1.2100447524300 1-1/2 38.10 2.03 51.59 4 250 1.72 10.50 266.70 0.95 1.41

MAXECON™ PLUSMaxecon Plus is a premium, qualitynon-conductive hose. It is rated high in oil resistance and can be used to convey oil, fueloil, diesel, kerosene and other petroleum derivedproducts. Maxecon Plus provides dependableand solid performance with a working pressureof 300 psi to 1" I.D. Its durable oil and solventresistant brown cover also stands up to abrasion,weathering and ozone. Maxecon’s multi-spiralpolyester yarn reinforcement makes this hosestrong, flexible and helps eliminate kinks.Maxecon Plus is the ideal hose for use in mining, steel or petroleum industrial applications.Note: Not recommended for a variety ofunleaded gasoline.

Cover Color: BrownOil Resistance: HighConstruction: Non-conductive

Tube: NBR, RMA Class ACover: NBR/PVC RMA Class AReinforcement: Spiral polyester yarn


Packaging: Reels

Resistance:

Branding:

Thermoid Versicon/Maxecon PlusNon-conductive Size WP Made In USA


00447404400 1/4 6.35 0.62 15.75 4 300 2.07 1.50 38.10 0.16 0.2400447406400 3/8 9.53 0.71 18.03 4 300 2.07 2.25 57.15 0.18 0.2700447408400 1/2 12.70 0.84 21.34 4 300 2.07 3.00 76.20 0.25 0.3700447412400 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.42 0.6200447416400 1 25.40 1.43 36.20 4 300 2.07 7.00 177.80 0.61 0.91


GOLDENAIR®

Goldenair is an excellent general purpose hosefor air, petroleum products and nitrogen service.Designed for the harsh conditions found in steelmills, shipyards, foundries, auto plants andconstruction sites, Goldenair resists weathering,ozone and abrasion. Goldenair provides aconstant working pressure to 350 psi in 3/4" sizeand is kink resistant. This premium quality hoseis non-conductive. It has a tough, durable coverthat resists oils and other solvents. Its 4-spiralpolyester yarn reinforcement provides addedstrength and flexibility even in the most extremeconditions.Note: Not recommended for a variety ofunleaded gasoline.

Cover Color: YellowOil Resistance: HighConstruction: Non-conductive


Temperature Range: -20°F to +180°F -29°C to +82°C

Packaging: Reels

Resistance:

Branding:

Thermoid Versicon/Goldenair Non-conductive Size PSI WPMade In USA (For Nitrogen Use)


00447312600 3/4 19.05 1.15 29.21 4 350 2.41 4.50 114.30 0.38 0.5700447316400 1 25.40 1.43 36.20 4 300 2.07 7.00 177.80 0.61 0.91


AIR/MULTIPURPOSE

AIR/MULTIPURPOSE

40


BLACK MAX® M.R.O.This premium quality, non-conductive hose ishigh in oil resistance throughout. Its fuel linequality will convey oil, fuel oil, diesel, keroseneand other petroleum derived products. Its tough,black cover resists oils and solvents as well asweathering, ozone and abrasion. Hose is testedto have a minimum of 1,000,000 ohms per inchresistance when tested with a 1,000 volt D.C.meggar.Note: Not recommended for a variety ofunleaded gasoline.

Cover Color: BlackOil Resistance: HighContruction: Non-conductive



Packaging: Reels

Resistance:

Branding:

Thermoid Versicon/Black MaxMRO Non-conductive Size WPMade In USA


00447604400▲ 1/4 6.35 0.62 15.75 4 300 2.07 1.50 38.10 0.16 0.2400447606400▲ 3/8 9.53 0.71 18.03 4 300 2.07 2.25 57.15 0.18 0.2700447608400▲ 1/2 12.70 0.84 21.34 4 300 2.07 3.00 76.20 0.25 0.3700447612400▲ 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.42 0.6200447616400▲ 1 25.40 1.43 36.20 4 300 2.07 7.00 177.80 0.60 0.89

▲ = Make To Order (MTO)


ULTIPURPOSEAIR/M

ULTIPURPOSE

41


GREEN GP/OXYGENGreen GP/Oxygen hose is designed to handlethe harsh, abusive conditions found in steelproducing and oil refinery environments. Thegreen cover is commonly color coded for oxygenin mills. It features a medium-high oil resistantNBR blend tube with a 4-spiral polyester yarnreinforcement. The high oil resistant cover anda constant working pressure of 300 psi makethis tough, heavy-duty hose the ideal choice forindustrial use.Note:This hose is not recomended for fuel or airbreathing applications.

Cover Color: GreenOil Resistance: Medium-HighConstruction:

Tube: NBR blend, RMA Class BCover: NBR/PVC, RMA Class BReinforcement: Spiral polyester yarn


Packaging: Reels

Resistance:

Branding:

Size: WP–GP/OxygenMade In USA


00336606400 .385 9.53 0.710 22.23 4 300 2.07 2.25 57.15 0.29 0.4300336608400 1/2 12.70 0.940 23.81 4 300 2.07 3.00 76.20 0.29 0.4300336612400 3/4 19.05 1.160 29.37 4 300 2.07 4.50 114.30 0.39 0.58

RADIAL AIRERadial Aire is a premium, multipurpose PVC airhose used across industry. Radial Aire is a medium-high resistant hose and offers an operating temperature range between -10°F and +150°F. Radial Aire provides smooth, solidperformance and offers constant working pressure of 250 or 300 psi. It features a durablePVC cover and tube with a 2-spiral polyesterreinforcing cords that help keep the hose kinkresistant and flexible. Cover Color: Blue or Red

Oil Resistance: Medium-HighConstruction:

Tube: PVC, RMA Class BCover: PVC, RMA Class BReinforcement: Spiral polyester yarn


Packaging: Reels or coupled lengths

Resistance:

Branding:

Thermoid Radial Aire Size WPMade In Canada


Red00134504400 1/4 6.35 0.50 12.70 2 300 2.07 1.50 38.10 0.09 0.1300134505400▲ 5/16 7.94 0.56 14.29 2 300 2.07 2.00 50.80 0.11 0.1600134506400 3/8 9.53 0.63 15.88 2 300 2.07 2.25 57.15 0.14 0.2100134508400 1/2 12.70 0.78 19.84 2 300 2.07 3.00 76.20 0.18 0.2700134510500▲ 5/8 15.88 0.91 23.02 2 250 1.72 3.75 95.25 0.22 0.3300134512500 3/4 19.05 1.03 26.19 2 250 1.72 4.50 114.30 0.25 0.37

Blue00135004400 1/4 6.35 0.50 12.70 2 300 2.07 1.50 38.10 0.09 0.1300135005400▲ 5/16 7.94 0.56 14.29 2 300 2.07 2.00 50.80 0.11 0.1600135006400 3/8 9.53 0.63 15.88 2 300 2.07 2.25 57.15 0.14 0.2100135008400 1/2 12.70 0.78 19.84 2 300 2.07 3.00 76.20 0.18 0.2700135010500▲ 5/8 15.88 0.91 23.02 2 250 1.72 3.75 95.25 0.22 0.3300135012500 3/4 19.05 1.03 26.19 2 250 1.72 4.50 114.30 0.25 0.37



AIR/MULTIPURPOSE – Coupled

AIR/MULTIPURPOSE – Coupled

42


Cover Color: Red (also available in yellow)Oil Resistance: LimitedConstruction:



Packaging: 50 ft. lengths – 5 per carton

Resistance:

Branding:

Thermoid Air Power 3/4" Made In USA


00114562258 3/4 19.05 1.15 29.21 4 200 1.38 4.50 114.30 0.38 0.5700114562558 3/4 19.05 1.15 29.21 4 250 1.38 4.50 114.30 0.38 0.5700114562458 3/4 19.05 1.15 29.21 4 300 2.07 4.50 114.30 0.41 0.61

RED AIR TOOL COUPLEDThis tough, versatile factory coupled air hose isspecifically designed to stand up to the harshworking conditions found on most project construction sites and industrial environments.Available in either 200 or 300 psi working pressures, this air hose features an EPDM tubeand cover with a 4-spiral polyester reinforcementthat provides excellent flexibility. This hose willresist kinking, abrasions, heat and ozone.This hose is cut to lengths and is coupled withMale x Male fittings with 1/4" or 3/8" threads per customer requirements.

Cover Color: RedOil Resistance: LimitedConstruction:



Packaging: See Chart

Resistance:

Branding:

Thermoid Air Power Size WP 4 SPMade In USA


Product Nominal I.D. Nominal O.D. Reinforcement Working Pressure LengthsNumber (inches) (mm) (inches) (mm) Spirals (psi) (Mpa) (feet) (meters)

00114586454▲ 1/4 6.35 0.49 12.45 4 200 1.38 50 15.2500114587454▲ 1/4 6.35 0.62 15.75 4 300 2.07 50 15.2500114586624▲ 3/8 9.53 0.68 17.27 4 200 1.38 25 7.6200114587624▲ 3/8 9.53 0.71 18.03 4 300 2.07 25 7.6200114587628▲ 3/8 9.53 0.71 18.03 4 300 2.07 25 7.6200114586654▲ 3/8 9.53 0.68 17.27 4 200 1.38 50 15.2500114586658▲ 3/8 9.53 0.68 17.27 4 200 1.38 50 15.2500114587654 3/8 9.53 0.71 18.03 4 300 2.07 50 15.2500114587658▲ 3/8 9.53 0.71 18.03 4 300 2.07 50 15.25

AIR POWER™ JACKHAMMERThermoid Air Power Jackhammer Hose is ahose as tough as its name. A rugged 4 -spiralconstruction available in 200, 250 or 300 psi, AirPower can tackle the job that only a jackhammercan dish out. The EPDM tube and cover handlesheat, ozone and weather cracking better thanother compounds. The OEM factory assemblieshave domestic or foreign manufactured crimpedsteel fittings. Durability is built-in and this hose is ready for hard work.


ULTIPURPOSEAIR/M

ULTIPURPOSE

43


FLEX-LOC™ PUSH-ONFlex-Loc is the state-of-the-art in push-on hose.It allows push-on fittings to be inserted intoplace easily and quickly. No special crimpingtools are required. Flex-Loc has exceptionalcoupling retention. The superior holding ability is created by a unique spiral angle design andpolyester reinforcement that grips the fitting from the inside. Fittings on the Flex-Loc will notgive even under full working pressure. Flex-Locis available with a 250 psi working pressure.Flex-Loc provides smooth, safe performance inthe most demanding, harsh working conditions.Flex-Loc is a high oil resistant, push-on hose.Its tube and cover make this a very effective,working hose for industrial, warehouse and otherapplications where a convenient push-on hosefitting could be used and value is essential.Note: Not recommended for a variety ofunleaded gasoline.

Cover Color: Black, Blue, Gray, Red, Green or YellowOil Resistance: HighConstruction:

Tube: Nitrile, RMA Class ACover: Nitrile/PVC RMA Class AReinforcement: Spiral polyester


Packaging: Reels – 700 ft. or 250 ft.

Resistance:

Branding:

Size WP – Flex-Loc – Made In USA


Product Number Product Number Nominal I.D. Nominal O.D. Reinforcement Working Pressure Min.Bend Radius Weight700 ft.Reels 250 ft.Reels (inches) (mm) (inches) (mm) Spirals (psi) (Mpa) (inches) (mm) (lb/ft) (Kg/m)

Black Black00338404300 00338404398 1/4 6.35 0.50 12.70 2 250 1.72 1.50 38.10 0.09 0.1300338406300 00338406398 3/8 9.53 0.63 15.88 2 250 1.72 2.25 57.15 0.12 0.1800338408300 00338408398 1/2 12.70 0.75 19.05 2 250 1.72 3.00 76.20 0.16 0.2400338410300 00338410398 5/8 15.88 0.91 23.02 2 250 1.72 3.75 95.25 0.22 0.3300338412300 00338412398 3/4 19.05 1.03 26.19 2 250 1.72 4.50 114.30 0.25 0.37

Blue Blue00338504300 00338504398▲ 1/4 6.35 0.50 12.70 2 250 1.72 1.50 38.10 0.09 0.1300338506300 00338506398 3/8 9.53 0.63 15.88 2 250 1.72 2.25 57.15 0.12 0.1800338508300 00338508398▲ 1/2 12.70 0.75 19.05 2 250 1.72 3.00 76.20 0.16 0.24

Gray Gray00338604300 00338604398▲ 1/4 6.35 0.50 12.70 2 250 1.72 1.50 38.10 0.09 0.1300338606300 00338606398▲ 3/8 9.53 0.63 15.88 2 250 1.72 2.25 57.15 0.12 0.1800338608300 00338608398▲ 1/2 12.70 0.75 19.05 2 250 1.72 3.00 76.20 0.16 0.24

Red Red00338704300 00338704398▲ 1/4 6.35 0.50 12.70 2 250 1.72 1.50 38.10 0.09 0.1300338706300 00338706398▲ 3/8 9.53 0.63 15.88 2 250 1.72 2.25 57.15 0.12 0.1800338708300 00338708398▲ 1/2 12.70 0.75 19.05 2 250 1.72 3.00 76.20 0.16 0.24

Green Green00338804300▲ 00338804398▲ 1/4 6.35 0.50 12.70 2 250 1.72 1.50 38.10 0.09 0.1300338806300 00338806398▲ 3/8 9.53 0.63 15.88 2 250 1.72 2.25 57.15 0.12 0.1800338808300▲ 00338808398▲ 1/2 12.70 0.75 19.05 2 250 1.72 3.00 76.20 0.16 0.24

Yellow Yellow00338904300▲ 00338904398▲ 1/4 6.35 0.50 12.70 2 250 1.72 1.50 38.10 0.09 0.1300338906300▲ 00338906398▲ 3/8 9.53 0.63 15.88 2 250 1.72 2.25 57.15 0.12 0.1800338908300▲ 00338908398▲ 1/2 12.70 0.75 19.05 2 250 1.72 3.00 76.20 0.16 0.24



AIR/MULTIPURPOSE

AIR/MULTIPURPOSE

44


FLEX-LOC™ 300 PUSH-ONFlex-Loc 300 is the state-of-the-art in push-onhose. Flex-Loc 300 was designed specifically foruse with robotic welders and for use in any otherindustrial applications requiring MSHA approvedflame resistant cover. Flex-Loc 300 allows push-on fittings to be inserted into place quicklyand easily. No special crimping tools are needed.Flex-Loc has excellent coupling retention. Thesuperior holding ability is created by a uniquespiral angle design and polyester reinforcementthat firmly grips the fitting from the inside.Fittings will not give even under full workingpressure. Flex-Loc 300 is a premium 300 psihigh oil resistant, non-conductive push-on hosethat will provide smooth, safe performance in oily and harsh conditions.Note: Not recommended for unleaded gasoline.

Cover Color: Black, Blue, Gray, Red, Green or YellowOil Resistance: HighConstruction: Non-conductive

Tube: Nitrile, RMA Class ACover: Nitrile/PVC RMA Class AReinforcement: Spiral polyester


Packaging: Reels – 700 ft.

Resistance:

Branding:

Thermoid – Flex-Loc 300 Non-conductive Size 300 PSI WPMade In USA MSHA 1C



Black00318404400 1/4 6.35 0.50 12.70 2 300 2.07 1.50 38.10 0.10 0.1500318406400 3/8 9.53 0.63 15.88 2 300 2.07 2.25 57.15 0.13 0.1900318408400 1/2 12.70 0.75 19.05 2 300 2.07 3.00 76.20 0.16 0.2400318410400 5/8 15.88 0.91 23.02 2 300 2.07 3.75 95.25 0.23 0.3400318412400 3/4 19.05 1.03 26.19 2 300 2.07 4.50 114.30 0.26 0.39

Blue00318504400▲ 1/4 6.35 0.50 12.70 2 300 2.07 1.50 38.10 0.10 0.1500318506400▲ 3/8 9.53 0.63 15.88 2 300 2.07 2.25 57.15 0.13 0.1900318508400▲ 1/2 12.70 0.75 19.05 2 300 2.07 3.00 76.20 0.16 0.24

Gray00318604400▲ 1/4 6.35 0.50 12.70 2 300 2.07 1.50 38.10 0.10 0.1500318606400▲ 3/8 9.53 0.63 15.88 2 300 2.07 2.25 57.15 0.13 0.1900318608400▲ 1/2 12.70 0.75 19.05 2 300 2.07 3.00 76.20 0.16 0.24

Red00318704400▲ 1/4 6.35 0.50 12.70 2 300 2.07 1.50 38.10 0.10 0.1500318706400▲ 3/8 9.53 0.63 15.88 2 300 2.07 2.25 57.15 0.13 0.1900318708400▲ 1/2 12.70 0.75 19.05 2 300 2.07 3.00 76.20 0.16 0.24

Green00318804400▲ 1/4 6.35 0.50 12.70 2 300 2.07 1.50 38.10 0.10 0.1500318806400▲ 3/8 9.53 0.63 15.88 2 300 2.07 2.25 57.15 0.13 0.1900318808400▲ 1/2 12.70 0.75 19.05 2 300 2.07 3.00 76.20 0.16 0.24

Yellow00318904400▲ 1/4 6.35 0.50 12.70 2 300 2.07 1.50 38.10 0.10 0.1500318906400▲ 3/8 9.53 0.63 15.88 2 300 2.07 2.25 57.15 0.13 0.1900318908400▲ 1/2 12.70 0.75 19.05 2 300 2.07 3.00 76.20 0.16 0.24


ULTIPURPOSEAIR/M

ULTIPURPOSE

45


HERCULES® IIHercules II… the latest addition to our high working pressure multipurpose hoses is a costeffective alternative to our very successful andpopular Hercules® 500 Multipurpose Hose.Hercules II was value-engineered to offer customers superior performance in harsh worksites like factories, foundries, manufacturingplants, mines, quarries and numerous otherindustrial applications.

Non-conductive and MSHA approved with aClass A RMA rating, Hercules II has a 4-spiralyarn reinforcement. This construction provides500 psi working pressure in sizes 1/4" through 1-1/2" and 400 psi working pressure in the 2"size; all with a 4:1 burst safety factor. HerculesII’s yellow, XNBR cover provides exceptionalresistance to abrasion, oils and other petroleumbased products. Hercules II is the best value and a great selection for any OEM or MRO application requiring long life and exceptionalperformance in material transfer situations.

Cover Color: YellowOil Resistance: HighConstruction:

Tube: NBR, RMA Class ACover: XNBR, RMA Class A Reinforcement: 4-spiral yarn


Packaging: Reels

Resistance:

Branding:

Thermoid Hercules II MultipurposeHose Size I.D. 500 PSI WP MSHA 1C-209/7 Non-conductive Made In USA

K G


45454168662 1/4 6.35 0.63 15.88 4 500 3.45 1.50 38.10 0.14 0.2145454248662 3/8 9.53 0.75 19.05 4 500 3.45 2.25 57.15 0.21 0.3145454328662 1/2 12.70 0.91 23.02 4 500 3.45 3.00 76.20 0.24 0.3645454488662 3/4 19.05 1.19 30.16 4 500 3.45 4.50 114.30 0.36 0.5445454648662 1 25.40 1.50 38.10 4 500 3.45 7.00 177.80 0.51 0.7600454520500 1-1/4 31.75 1.75 44.45 4 500 3.45 8.75 222.25 0.66 0.9800454524500 1-1/2 38.10 2.09 53.09 4 500 3.45 10.50 266.70 0.70 1.0400454532400 2 50.80 2.64 67.06 4 400 2.76 16.00 406.40 1.45 2.16

EXCALIBUR™ MULTIPURPOSEExcalibur is a highly versatile multipurpose hosedesigned for high pressure,extreme temperaturesand working environments. Excalibur is ideal foruse in air, water or petroleum applications inheavy construction, mining or quarry operations.It also provides superior service for washer operations in meat and poultry plants or agriculturalsprays. Excalibur is non-conductive, flameresistant and is MSHA approved with a Class ARMA rating. Excalibur has a spiral polyester yarnconstruction that maximizes flexibility and strengthwhile providing a constant 500 psi workingpressure. A highly visible yellow, NBR/PVC blendcover provides excellent resistance to fats, oils,kerosene and gasoline. Excalibur providessmooth, constant performance in temperaturesranging from -40°F to +212°F.The cover is not asabrasion resistant as our Hercules hose, but provideseconomical value in high pressure applications.


Tube: NBR/PVC, RMA Class ACover: NBR/PVC, RMA Class A, MSHA Approved Reinforcement: Spiral polyester yarn


Packaging: Reels

Resistance:

Branding:

Thermoid Excalibur MultipurposeHose Size I.D. 500 PSI WP MSHA1C-114/1 Made In USA ElectricallyNon-conductive

K G


22574168662▲ 1/4 6.35 0.63 15.88 4 500 3.45 1.50 38.10 0.16 0.2422574248662 3/8 9.53 0.75 19.05 4 500 3.45 2.25 57.15 0.22 0.3322574328662 1/2 12.70 0.91 23.02 4 500 3.45 3.00 76.20 0.24 0.3622574488662 3/4 19.05 1.19 30.16 4 500 3.45 4.50 114.30 0.37 0.5522574648662 1 25.40 1.50 38.10 4 500 3.45 7.00 177.80 0.51 0.76



AIR/MULTIPURPOSE

AIR/MULTIPURPOSE

46


HERCULES® 1000 MULTIPURPOSEHercules 1000 is a highly versatile, multipurposehose designed for super high pressure, extremetemperatures and working environments. Hercules1000 is ideal for use in rock drilling, air hammerand water jetting applications in heavy construction, mining or quarry operations. It alsoprovides superior service for washer operations inmeat and poultry plants or agricultural sprays aswell as for use in the transfer of petroleum or othersolvent solutions. Hercules 1000 is non-conductiveand is MSHA approved with a Class A RMA rating.Hercules 1000 has spiral polyester wrap construction that maximizes flexibility and strengthwhile providing a constant 1000 psi working pressure. Hercules 1000 has a minimum 4:1 burstsafety factor. A highly visible, fluorescent yellow,XNBR cover provides superior resistance to abra-sion, oils, fats, kerosene, and gasoline. Hercules1000 provides smooth, constant performance intemperatures ranging from -40°F to +212°F.


Tube: NBR, RMA Class ACover: XNBR, RMA Class A (Pin Pricked)Reinforcement: 4-spiral polyester yarn - 1/4", 3/8", 1/2" sizes

4-spiral aramid fiber - 3/4" and 1" sizesTemperature Range: -40°F to +212°F

-40°C to +100°CPackaging: Reels

Resistance:

Branding:

Thermoid Hercules 1000Multipurpose Hose Size I.D.1000 PSI WP MSHA 1C-114/1Made In USA Non-conductive

K G


22544168662▲ 1/4 6.35 0.63 15.88 4 1000 6.89 1.50 38.10 0.16 0.2422544248662 3/8 9.53 0.75 19.05 4 1000 6.89 2.25 57.15 0.22 0.3322544328662 1/2 12.70 0.94 23.81 4 1000 6.89 3.00 76.20 0.24 0.3622544488662 3/4 19.05 1.13 28.58 4 1000 6.89 4.50 114.30 0.35 0.5222544648662 1 25.40 1.50 38.10 4 1000 6.89 7.00 177.80 0.47 0.70


HERCULES® 500 MULTIPURPOSEHercules 500 is a multipurpose hose that isdurable enough to stand up to the toughest construction job. Engineered to withstand harshconditions, Hercules 500 is an extremely abrasionresistant hose that is ideal for use in agriculture,factory, foundry, mining, quarry and many otherindustrial applications. Hercules 500 is non-conductive and MSHA approved with a Class ARMA rating. Hercules 500 has a spiral polyesteryarn construction that maximizes flexibility andstrength while providing a constant 500 psi working pressure and a 4:1 burst safety factor.A highly visible, fluorescent yellow, XNBR coverprovides superior resistance to abrasion, oils andother petroleum based products. These featuresmake Hercules 500 ideal for extra heavy dutypneumatic use or for the transfer of many liquids,including oils, fats, kerosene, gasoline and solvents in temperatures ranging from -40°F to +212°F.


Tube: NBR, RMA Class ACover: XNBR, RMA Class A Reinforcement: 4-spiral polyester yarn - 1/4", 3/8", 1/2" sizes


Packaging: Reels

Resistance:

Branding:

Thermoid Hercules MultipurposeHose Size I.D. 500 PSI WP MSHA1C-114/1 Made In USA Non-conductive

K G


22454168662 1/4 6.35 0.63 15.88 4 500 3.45 1.50 38.10 0.14 0.2122454248662 3/8 9.53 0.75 19.05 4 500 3.45 2.25 57.15 0.21 0.3122454328662 1/2 12.70 0.91 23.02 4 500 3.45 3.00 76.20 0.24 0.3622454488662 3/4 19.05 1.19 30.16 4 500 3.45 4.50 114.30 0.36 0.5422454648662 1 25.40 1.50 38.10 4 500 3.45 7.00 177.80 0.51 0.7622454808662 1-1/4 31.75 1.75 44.45 4 500 3.45 8.75 222.25 0.66 0.9822454968662 1-1/2 38.10 2.09 53.18 4 500 3.45 10.50 266.70 0.70 1.04



ULTIPURPOSEAIR/M

ULTIPURPOSE

47


ZEPHYR™ AIRZephyr is an industrial strength high-pressure,wire-braid air hose. It is well suited for multipleuses in air tool and air activated equipment. It hasapplications for use in either construction or industrial environments. Zephyr Air hose featuresa variety of hose construction designs, sizes andworking pressures to fit your application. In the1/2" I.D. to 1" I.D. sizes, Zephyr features aSBR/NBR tube. In 1-1/4" I.D. or larger sizes,Zephyr has an EPDM tube. All hose sizes arereinforced with heavy-duty, spiral wire braids toprovide excellent strength and durability. Zephyr’scover consists of a NBR/PVC compound in the1/2" I.D. to 1" I.D. sizes. EPDM is the cover compound for sizes 1-1/4" I.D. and larger. All hosesizes have a distinct yellow cover that is abrasion,kink and ozone resistant. Zephyr Air hose providesa dependable and constant working pressure.Zephyr has 3 different working pressure ranges toselect from, including 500, 650 or 1000 psi. Thisdurable, high-pressure air hose delivers smooth,trouble-free performance. It is available in sizesand lengths to fit your requirements.

Cover Color: YellowOil Resistance: Determined by sizeConstruction:

Tube: SBR/NBR, RMA Class C: 1/2" to 1"EPDM, RMA Class C: 1-1/4" and over

Cover: NBR/PVC, RMA Class A: 1/2" to 1"EPDM, RMA Class C: 1-1/4" and over

Reinforcement: One or multiple wire braidsTemperature Range: -40°F to +180°F

-40°C to +82°CPackaging: 50 ft. lengths – all sizes; Reels – 1/2" to 1"

Resistance:

Branding:

Thermoid Zephyr Air Hose WPMade In USA


Product Nominal I.D. Nominal O.D. Braids Working Pressure Min. Bend Radius WeightNumber (inches) (mm) (inches) (mm) (psi) (Mpa) (inches) (mm) (lb/ft) (Kg/m)

22441328662▲ 1/2 12.70 0.81 20.64 1 1000 6.89 3.00 76.20 0.32 0.4822441488662▲ 3/4 19.05 1.13 28.58 1 1000 6.89 4.50 114.30 0.44 0.6522441648662▲ 1 25.40 1.38 34.93 1 1000 6.89 7.00 177.80 0.77 1.1501014444502▲ 1-1/4 31.75 1.81 46.04 1 650 4.48 8.75 222.25 0.90 1.3401014445502▲ 1-1/2 38.10 2.00 50.80 1 500 3.45 10.50 266.70 1.00 1.4901014446502▲ 2 50.80 2.50 63.50 2 500 3.45 14.00 355.60 1.40 2.0801014447502▲ 2-1/2 63.50 3.13 79.50 2 400 2.76 15.00 381.00 1.80 2.67

GLACIER™ MULTIPURPOSEGlacier is a cold weather hose specifically engineered for use in sub-zero applications. Ithandles air, oil, gasoline, diesel, kerosene, fuel oiland some chemicals. Even at temperatures as lowas -65°F, Glacier keeps its flexibility, resists kinksand maintains its easy-reeling characteristics.Glacier has an oil resistant, synthetic rubber tubethat is reinforced with a spiraled high tensile polyester cord.These features combine to providea constant working pressure of 300 psi and a 4:1burst safety factor. Glacier’s blue synthetic rubbercover is designed for maximum abrasion resistance.Glacier comes in a variety of sizes. The Glacierhose is designed to operate effectively and remaineasy to handle and reel in temperatures rangingfrom -65°F to +180°F.Note: A static wire is included on all sizes asa safety precaution.

Cover Color: BlueOil Resistance: HighConstruction:

Tube: ECO low temperature oil resistant synthetic rubberRMA Class A

Cover: ECO low temperature oil resistant synthetic rubberRMA Class A

Reinforcement: Spiral polyester yarnTemperature Range: -65°F to +180°F

-54°C to +82°CPackaging: Reels

Resistance:

Branding:

Thermoid Glacier MP Hose SizeI.D. WP Made In USA



22554166662▲ 1/4 6.35 0.63 15.88 4 300 2.07 1.50 38.10 0.15 0.2222554246662 3/8 9.53 0.75 19.05 4 300 2.07 2.25 57.15 0.21 0.3122554326662 1/2 12.70 0.94 23.81 4 300 2.07 3.00 76.20 0.30 0.4522554486662 3/4 19.05 1.25 31.75 4 300 2.07 4.50 114.30 0.39 0.5822554646662 1 25.40 1.50 38.10 4 300 2.07 7.00 177.80 0.49 0.7322554806662 1-1/4 31.75 1.78 45.24 4 300 2.07 8.75 222.25 0.61 0.9122554886662▲ 1-3/8 34.93 1.88 47.63 4 300 2.07 9.25 234.95 0.68 1.0122554966662 1-1/2 38.10 2.09 53.18 4 300 2.07 10.50 266.70 0.83 1.23

Also available in black cover.

Documents

Delivering powerful solutions. - Hydraulic Hosenationalhose.com/wp-content/uploads/2016/11/... · powerful solutions. EAT Industrial Hose Master Catalog – NA E-HOO-MC003-E2 2014