Decorative Outdoor Lighting - Sternberg Lighting€¦ · method of installation. A hole is dug wide and deep enough to accommodate the pole burial section and backfill material. The

aCOrNS

glOBeS

Caged aCOrNS

laNterNS

MISSION Style

POleS

BaSeS

DecorativeOutdoor LightingDecorative Outdoor Lighting

STONEBRIDGELIGHTING PRODUCTS AREIDEAL FOR:

• Builders

• Developers

• City Planners

• Home OwnerAssociations

PROVIDING A COST EFFECTIVESOLUTION FORYOUR PROJECT:

• Subdivisions

• Neighborhoods

• Parks

• Pathways

• Parking Lots

2

Acorns & Globes 4

Caged Acorns 5

Lanterns 6

Mission Style 7

Poles and Bases 8-11

Assembly / Installation 12-13

Ordering 14-15

CONTENTS

CreateYourOwnAssemblyStep 1 – Choose a fixture

This systemlets youeasily create the lookyou want.

Step 3 – Choose abase style

Step 2 – Choose a shaft style

Customize thelook you want.Simply chooseany fixture, shaftand base. Easyas 1-2-3 toassemble.

CreateYourOwnAssembly3

The result

4

Our Acorns and Globes provide old world aesthetics withuniform and controlled illumination for enhanced visibilityand security. Made of dent resistant acrylic, as a standard.The Acorn style is virtually maintenance-free. The fitter iscast aluminum. Polycarbonate available.

l10 – This is the largest of our traditionalstreet acrylic acorns. It measures 161/2" x39".l11 – This attractive traditional streetacrylic acorn measures 151/2" x 341/2". Slips a 4" pole.

l12 – An authentic street acorn measuring151/4" x 33". The stylish design lends itselfto any environment.l13 – A traditional acrylic globe that blendsinto any streetscape. Measures 18" x 271/2".

Durableand StrongDurable

and Strong

Acorns&GlobesAcorns&Globes

L10 L11

L12 L13

Caged Acorns offer a distinct style for your lighting needs. Made of dent resistant acrylic, asa standard. The fitter and cage is cast aluminum.Polycarbonate available.

l14 – An elegant caged acrylic acorn with a solid roof. Measures 18" x 34".l15 – Measuring 18" x 38", this statelycaged acrylic acorn enhances the safety andambiance of your neighborhood.

l16 – A traditional caged acrylic acorn that beautifies any streetscape. The cageadds a distinctive look. Measures 18" x 39".

5Caged AcornsCaged Acorns

Finelycrafted details

Simply ElegantSimply Elegant

L14 L15

L16

6

Our Lanterns provide old world aesthetics withuniform illumination for enhanced visibility andsecurity. Features include a four or six sided cast aluminum frame, clear acrylic lenses(optional seeded acrylic available), optionalfrosted chimney and roof mounted ballasts.

l17 – This lantern features a four sided castaluminum frame. Includes clear acrylic lens-es. Options include frosted chimney or glassrefractor, roof mounted ballast and twist-lock photocell. Measures 153/4"W x 213/4"H.

l18 – This six sided fixture features a onepiece, cast aluminum cage. Includes clearacrylic lenses. Options include frosted chimney or glass refractor, roof mountedballast and twist-lock photocell. Measures21W" x 34"H.

LanternsLanterns

Clear SeededAcrylic Available

Shown with clear acrylic and optional frosted chimney

QualityComponentsQualityComponents

L18

L17


Shown with clear acrylic and optional frosted chimney

The Mission Style design of luminaires is in the style and tradition of the Arts / Crafts and Mission period. Features include clear acrylic lenses. Options include frosted chimney or glass refractor, roof mounted ballast and twist-lock photocell.

7Mission StyleMission Style

l19 – This attractive mission style lantern features a four-sided, cast aluminum frame with modularbase and fitter. Includes clear acrylic lenses. Options include frosted chimney or glass refractor, roofmounted ballast and twist-lock photocell. Measures 22"W x 311/2"H. Shown here with an optional glass refractor.

See page 11 for the P24 –4" Square Pole

ToughPowderCoat FinishAll products feature atough textured blackpowder coat finish.

Standard Clear acrylic Optional Seeded acrylic

CastAluminumCastAluminum

L19


Shown with clear acrylic and optional refractor

8

P20TF1212' tall

P20TF1010' tall

P20TF88' tall

P20 CastAluminum Base –Measures 16"D x 171/4"H.

SIZe COMParISON CHart / MOdel NUMBerS

P20 / 12'

P20 / 10'

P20 / 8'

P20 / 14'

Cast Tapered ExtrudedFluted Pole (TF)

Extruded StraightFluted Pole (SF)

Poles &BasesPoles &BasesPOLES come in two styles. Cast tapered fluted poles are made of heavy wallcast aluminum for strength and durability. Extruded poles are made from heavywall extruded aluminum and are available as straight fluted or straight smooth.Extruded poles are available as direct burial or anchor bolt mount. Cast taperedpoles are anchor bolt mount only. BASES are a clamshell design allowing foreasy access to wiring and inner base mounting hardware and are compatiblewith our cast and extruded poles.

Extruded StraightSmooth Pole (SS)

*Straight smooth not shown

4"4" 4"

Choose a tapered cast fluted, extrudedfluted or smooth pole

P20TF1414' tall

P20SF1414' tallor

P20SS14*14' tall

P20SF1212' tallor

P20SS12*12' tall

P20SF1010' tallor

P20SS10*10' tall

P20SF88' tallor

P20SS8*8' tall

P20Series

t t t tt

t Discontinued. While supplies last. Consult factory for availablity.

9

P21TF1414' tall

P21SF1414' tallor

P21SS14*14' tall

P21SF1212' tallor

P21SS12*12' tall

P21TF1212' tall

P21SF1010' tallor

P21SS10*10' tall

P21TF1010' tall

P21SF88' tallor

P21SS8*8' tall

P21TF88' tall

P21 Cast Aluminum Base –Measures 16"D x 231/4"H.

Fine tooling providesan elegant look in the craftsmanship ofour products.


P21 / 12'

P21 / 10'

P21 / 8'

P21 / 14'


4"4" 4"


P21Series




10

P22 Cast Aluminum Base –Measures 13"D x 41"H.

P22 / 14'

P22 / 12'

P22 / 10'

P22 / 16'


StoneBridge poles and fixturescreate a distinct look and character to place on anystreet or landscape.

Poles &BasesPoles &Bases

P22TF1616' tall

P22SF1616' tallor

P22SS16*16' tall

P22SF1414 tallor

P22SS14*14' tall

P22TF1414' tall

P22SF1212' tallor

P22SS12*12' tall

P22TF1212' tall

P22SF1010' tallor

P22SS10*10' tall

P22TF1010' tall


P22Series

AttractivelyDesignedAttractivelyDesigned





4" 4"4"

P23 Cast Aluminum Base –Measures 123/8"D x 9"H.

Sturdy, strong and dependable,StoneBridge Lighting Poles areattractively designed to enhanceyour neighborhood giving youyears of trouble free service.

11

P24 –4" Square Pole The pole ofchoice for ourMission style fixture. Shaftheights are avail-able in 8', 10', 12'and 14'. Base sizeis 10"SQ x 2"H.

P23 / 12'

P23 / 10'

P23 / 8'

P23 / 14'


Choose a fluted or smooth pole

P23SF1414' tall

P23SS1414' tall

P23SS1212' tall

P23SF1212' tall

P23SS1010' tall

P23SF1010' tall

P23SS88' tall

P24SQ8 . . . . . 8' tallP24SQ10 . . . 10' tallP24SQ12 . . . 12' tallP24SQ14 . . . 14' tallAvailable in anchorbolt mount only

P23SF88' tall

P23Series

EasyToInstallEasyToInstall

P24Series

Straight flutednot shown


4"

Extruded SquareSmooth Pole (SQ)

4"

12

Standard poles mount with four "L" typeanchor bolts. Refer to base template forbolt size and orientation. The alternative toanchor base installation is direct burial(DB). Add DB to the end of your extrudedpole part number, i.e.; P22TF16-DB.

P22 18' ext.

P23 18' ext.

P20 18' ext.

P21 18' ext.

dIreCt BUrIal

Extruded poles may be installed by the Direct Burialmethod of installation. A hole is dug wide and deepenough to accommodate the pole burial section and backfill material. The pole is lowered into the hole, the below grade wires are fed through the

pole and the hole is backfilled and tamped using theappropriate backfill material for the soil conditionspresent. The pole’s burial section will vary with size of pole and soil conditions.

Assembly &InstallationAssembly &Installation

CaSt taPered POle / BaSe SySteM

Easy accesswireway forelectrical connections.

Base clamshell securelybolts together.

Fixture slipsonto 4" tenon.

Taperedshaft is verysturdy andlightweightenablingeasy assembly.

EasyAssemblyEasyAssembly

Easy andefficientbase andpole compo-nents enablequickassembly.

13

2-PIECE OUTER“CLAMSHELL” BASE

(4) MOUNTING WASHERS & NUTS(BY OTHERS)

GROUND LINE

FOOTER (BY OTHERS)

BOlt CIrCleS

aNCHOr BOlt INStallatION

Anchor BoltAnchor BoltHAND HOLE(DOOR & HARDWARE NOTSHOWN FOR CLARITY)

POLE SHAFTASSEMBLY

ANCHOR BOLTS (BY OTHERS)

3"

HAND HOLE THIS SIDEHOUSE SIDE

8" (MIN. BOLTCIRCLE)

9" (MAX. BOLTCIRCLE)

For P20, P21, P22 and P23

• Suggested Bolt Circle: 8.50"• Maximum Bolt Circle: 9.00"• Minimum Bolt Circle: 8.00"• Anchor Bolt: 1/2" dia.

• Allow for drainage if usinggrouting to conceal gapsbetween base and footing.

9" DIA.BOLT

CENTERLINE

For P24

HAND HOLE THIS SIDEHOUSE SIDE

Anchor Bolt:3/4" dia.

14 OrderingOrderingFIXtUre SeleCtION

L19L18L17L16L15L14L13L12L11L10

Each fixture includes a 110 volt medium base socket for an incandescent lamp* or compact fluorescent self ballasted lamp*. Lanterns come standard with clear acrylic lens. Fixtures are finished in textured black.

*Not included

OPTICS

R3 Glass refractor provides an I.E.S. Type III light distribution pattern for streets and pathways. Also provides light diffusion.

R5 Glass refractor provides an I.E.S. Type V light distribution pattern for general lighting areas. Also provides light diffusion.

FC Glass frosted chimney provides decorative accent as well as light diffusion.

DS Dark Sky Reflector. Type V semi-cutoff light distribution for reduced uplight for general lighting areas. Also provides light diffusion.

HRO3 Horizontal Dark Sky Reflector Type III for L17, L18 and L19 fixtures.

HRO5 Horizontal Dark Sky Reflector Type V for L17, L18 and L19 fixtures.

Type III semi-cutoff light distribution. Requires 1/2 the energy of metal halide and high pressure sodium. Color temperature 5000K.

Type V semi-cutoff light distribution. Requires 1/2 the energy of metal halide and high pressure sodium. Color temperature 5000K.

LIGHT SOURCE

B High intensity discharge ballast transformer for metal halide or high pressure sodium lamps. Provides more lamp lumens, longer lamp life and energy savings. Must specify intended lamp source.

• Choice in Metal Halide: ¨50 WATT MH ¨70 WATT MH ¨100 WATT MH ¨150 WATT MHB50MH B70MH B100MH B150MH

• Choice in High Pressure Sodium: ¨50 WATT HPS ¨70 WATT HPS ¨100 WATT HPS ¨150 WATT HPSB50HPS B70HPS B100HPS B150HPS

OPTIONAL PHOTOCELLSP110 Photocell for light source on 110 volt system. Provides automatic turn on and off from dusk to dawn.

P277 Photocell for light source on 208 through 277 volt system provides automatic turn on and off from dusk to dawn.

OPTIONAL

CS Clear seeded lens will provide an old world look and more lamp diffusion.

LAMPS

LMH Metal Halide lamp - specify wattage: ¨50LMH ¨70LMH ¨100LMH ¨150LMH

LHPS High Pressure Sodium lamp - specify wattage: ¨50LHPS ¨70LHPS ¨100LHPS ¨150LHPS

OPTIONAL FINISH (BK - BLACK IS STANDARD)

VG Verde green finish for a weathered patina look.

CF Custom finishes to meet your requirements.ANYCOLOR

VERSA100LED3

VERSA100LED5

For L10, L11, L12, L13, L14, L15 and L16 fixtures.

OPtIONS aNd aCCeSSOrIeS

15

POle SeleCtION

8' 10' 12' 14' SF-Straight Fluted AB - Anchor BoltSS-Straight Smooth DB - Direct BurialTF-Tapered Fluted

BUIld FIXtUre MOdel

BUIld POle MOdel

CHOOSEFIXTURE MODEL

CHOOSEOPTIONAL OPTIC

CHOOSEOPTIONAL

LIGHT SOURCE(BALLAST)

CHOOSEOPTIONAL PHOTOCELL

CHOOSEOPTIONAL CS LENS*

CHOOSEOPTIONALLAMP

P20 12' TF AB ABT HT

CHOOSEBASE STYLE

CHOOSEPOLEHEIGHT

CHOOSESHAFTTYPE

CHOOSEINSTALLATIONMETHOD

CHOOSEOPTIONAL

ANCHOR BOLTS

CHOOSEOPTIONAL

HARD TEMPLATE

BK

ABT Anchor Bolts. 4 Ea. 1/2" x 18" long. “L” shaped with paper template. (P24 and P25: 3/4” x 18” long)

HT Hard Template for ease of setting anchor bolts. (1 ea. per pole)

VG Verde Green finish for a weathered patina look. (BK - Black is standard)

CF Custom Finishes to meet your requirements.

L10 R3 B50MH P110 50LMH BK

CHOOSEFINISH

(BK - Standard)

CHOOSEPOLE FINISH(BK - standard)

P20

P21

P22

P23

P24

P25

SF or SS Only

SF or SS Only

SF or SS Only

*Applies to L17, L18 and L19 only

POLE MODEL SPECIFY POLE HEIGHT SPECIFY SHAFT TYPE SPECIFY INSTALLATION METHOD

POle aCCeSSOrIeS

SF or SS Only

N/A

N/AS Q O N L Y

STONEBRIDGE LIGHTING has earned a reputationthroughout the lighting industry for high quality productsand services. We warrant that our products and finishesare manufactured in accordance with their applicablematerial specifications and are free from defects in mate-rials and workmanship. STONEBRIDGE LIGHTINGwill, at its option, either repair or replace without charge,any properly installed STONEBRIDGE LIGHTING prod-uct that fails under normal operating conditions withinone year from date of purchase. Product must be returned,freight prepaid, to our plant and our inspection mustdetermine that it is defective under the terms of warranty.This warranty is only for product manufactured bySTONEBRIDGE LIGHTING and does not extend totransportation, installation or replacement charges, nor

does it apply to any equipment of another manufacturerused in conjunction with STONEBRIDGE LIGHTINGequipment. This warranty specifically excludes fatiguefailure or similar phenomena resulting from inducedvibration, harmonic oscillation or resonance associatedwith movement of air currents around the product. Theabove warranties are given in lieu of all other warrantiesexpress or implied, including without limitation, the war-ranty of merchantability and the warranty of suitabilityfor a particular purpose. It is expressly stated thatSTONEBRIDGE lighting assumes no liability for conse-quential or liquidated damages arising out of a breach ofthe sale, including any warranties arising therefrom, andbuyer's remedy shall be limited to repair or replacementof defective parts as described above.

Warranty and OrderingWarranty and Ordering

To order call your localSternberg Agent.

SBCAT09-17

Documents

Decorative Outdoor Lighting - Sternberg Lighting€¦ · method of installation. A hole is dug wide and deep enough to accommodate the pole burial section and backfill material. The