Decontamination&AuthorisationCertificate

It is important to complete all the necessary information otherwise services could be delayedTo enable us to comply with the current COSHH Regulations, all pipettes used with hazardous materials must be decontaminated of all hazards and not presentarisktotheservicetechnician.Pleasecompletethiscertificatedeclaringtheitemsashazardfree&encloseitwithyourpipettesforservicing.

Delivery Address: Invoice Address:

Promotion Code:

Manufacturer/Model of Pipettes to be Serviced No. of Pipettes Manufacturer/Model of Pipettes to be Serviced No. of Pipettes

Name: Company: Dept:

Tel No: Fax No: Email:

Customer Order No: VAT Exemption: YES NO

Service Type: As Received Calibration Only Service & As Returned Calibration As Received Service & As Returned Calibration

Service Level Required: (2.2, 2.4 etc) Details shown overleaf

Have the pipette(s) been used with any hazardous materials? YES Go to section A then C NO Go to section B then C

Nature of Contaminant:

Method of Decontamination:

Decontaminated by: Date of Decontamination:

AIconfirmthattheaboveinformationisaccurate,andthatthepipette)s)detailedis/aresafetohandle

Position: Date:

Signed: Name:BI authorise that any spare parts required to bring this/these pipette(s) back to required calibration level may be replaced and that these will be detailed on my invoice

Please contact me with a quotation before proceeding with any service if spare parts amount to £30 or over per pipette

Please contact me with a quotation for spare parts before proceeding with any service

C

Test Specifications: Manufacturers ISO 8655

Decon Cert 2013.indd 1 25/06/2013 15:42

*Please note that selecting fewer than 10 readings at 3 volumes is on the understanding that it does not permit a conclusion of conformity to ISO 8655*

2.2 Reading Calibration

All Instruments are serviced andrepaired, followed by a two reading accuracy check at the lowest andhighestspecificationvolumes.

Weissueacertificateofcalibrationdetailing the results of the check.

2.4 Reading Calibration

All Instruments are serviced andrepaired, followed by a four reading accuracy check at the lowest andhighestspecificationvolumes.

Weissueacertificateofcalibrationdetailing the results of the check.

3.10 UKAS Calibration

All Instruments are serviced andrepaired, followed by a ten reading accuracy check at the lowest, midandhighestspecificationvolumes.

WeissueafullUKAScertificateofcalibration detailing the results ofthe check

Service & Calibration Options

Send Your Pipettes, Order Form and Decontamination Certificate to: Sky Business Centre, 9a Plato Business Park, Damastown, Mulhuddart, Dublin 15F T 00353 1 8851605 F +44 (0) 1162 346704 E pipetteservice@anachem.co.uk www.anachem.co.uk

My Reagents My PCR Plastics

My Oligonucleotides My DNA Template

MyThermalCycler

Have You ConsideredAll Your PCR Variables?Thermal Cycler Performance Should Not be Ignored! PCR is a dynamic and very powerful technique. It works over a range of temperatures and with varying concentrations of reagents

With such huge variations between blocks and machines there is a real need to have

acomprehensiveunderstandingoftheblocksprofiletoreducetherisksoffailedor

poor PCR results. Having machines calibrated enables you to determine what is

occurring across the block and how to alleviate these risks in your research.

Optimal and Controlled Conditions of Each of the 5 Variablesare Essential to Obtain Reliable and Reproducible Results

Anachem CYCLERtest® ServiceTheAnachemThermalCyclerValidation,CalibrationandCertificationService

MTAS® is fully traceable and calibrated according to the ISO:17025 standards.

Onlytrainedandcertifiedtechniciansperformthesevalidationsandcertifications.

Testingisperformedin-situatyoursiteformaximumefficiencyandconvenience.

T 01582 456256 E pipetteservice@anachem.co.uk

Please contact us for more information or to discuss your requirements

Find Out How Your Cycler is Affecting Your Results

Decon Cert 2013.indd 2 25/06/2013 15:42