Standard UnitsLouvre stacking: optionally left, right, centre or split.Max. width: 7m, in case of combination units 7m for each track.Max. height: 5m (greater heights available on inquiry).

Top and Bottom Track UnitsLouvre stacking: optionally left, right, centre or split.Max. unit width: 4.5mmax. unit height: 5.0m (mounted vertically) 2.0m (mounted horizontally or sloping).Slope UnitsLouvre stacking: at the high endMax. track length: 7m, in case of combination units 7m for each track.Max. height: 5m (greater heights available on inquiry).Max angle: 55o (greater angles available on inquiry).

Horizontally Curved UnitsLouvre stacking: optionally left, right, centre or split.Max. track length: 5.60m.Max. height: 5m (greater heights available on inquiry).Min. radius: 900mm (127mm louvre), 650mm (89mm louvre), 550mm (63.5mm louvre).

Vertically Curved UnitsLouvre stacking: in the centre or at the highest point of the unit.Max. track length: 5.60m.Max. height: 5m (greater heights available on inquiry).Min. radius: 500mm

Available louvresStandard widths: 127mm; 89mm; 63.5mm.Special widths: 110mm; 100mm; 80mm; 51mm.(Further widths available on inquiry.)

Stacking widthsThese depend on the number of louvres (unit width) and the louvre width; e.g. stacking width for a unit width of 2m and louvre width of 127mm = 22cm.

The types of blinds shown in the table are representative of all types available. All types of blind are explained in detail in the DECOMATIC®General Overview.

DA 2000Technical Data

Standard Motor / Mono Motor / Top Mount MotorApplication: Tilt and sideways travel of the louvres. Mono motor for the application of only two functions, top-mounted motor for suspended ceilings. Dimensions: 317mm x 47mm x 32mm (L x W x H), plus dimensions of adaptors. Motor Structure: 2 robust motors, 12V each, with planetary gear in aluminium profile with plastic end caps. Location: Fitted generally behind the track (in curved blind units, a straight track section of at least 320mm must be provided.) Colour: Always matches the colour of the track. Operation: Keyboard operation, timer, 10-channel remote control (with emergency operation facility.) Tilt radius: 180o; 130o when the blind is partially drawn back. Input voltage: 12V AC. Power consumption: 20 mA (stand by); 1A (active). Frequency: 50 H Tractive power: 62 N. Torque: 30 Ncm on the grooved shaft; automatic shutdown on overload. Working temperature: 0 to +70 oC

Amplified MotorApplication: Slope units, curved units, heavy hangings (e.g. chains, PVC). Dimensions: 331mm x 47mm x 33mm (L x W x H), plus dimensions of adapters. Tractive power: 140 N. Travel speed: approx. 3m/min.

Top and Bottom Track MotorApplication: Top and bottom track units (two synchronous motors for each unit that are always synchronised via a control cable). Dimensions: 380mm x 47mm x 33mm (L x W x H), plus dimensions of adaptors. Travel speed: approx. 4m/min.

Tilt MotorApplication: Only for tilting the louvresDimensions: 150mm x 47mm x 33mm (L x W x H), plus dimensions of adapters. Tilt radius: 180o.

Power Pack For Track (Standard Power Supply)Dimensions: 115mm x 49mm x 39mm (L x W x H). Connections: primary - STASEI 200 socket of the Hirschmann company; secondary - 10cm cable with two-pin jack plug. Weight: 300g.Input voltage: 230V AC ±10%. Output voltage: 12V AC / 1.2 A. System frequency: 50-60 Hz. - According to VDE 0551 with temperature protection ( Protection class II, Index of protection IP 20). ISO Class: T40 / E. High voltage strength: 4.5 kV. Working temperature: 0 to +50 oC. Ambient temperature: max. 70 oC

Power Pack with PlugDimensions: 0 60mm, T=50mm. Connections: primary - Euro plug; secondary - 2.5m cable with two pin jack plug. Weight: 510g. Input voltage: 230V AC ± 10%. Output voltage: 12V AC / 20 VA. System frequency: 50-60 Hz. - According to VDE 0551 with temperature protection ( Protection class II, Index of protection IP 40). ISO Class: B. High voltage strength: 4.2 kV. Ambient temperature: max. 40 oC.

The DECOMATIC® motor: Wide range of operation variants and safe and reliable technology for installation in large buildings

DECOMATIC®

Motor System DA 2000

The DECOMATIC® Motor System DA 2000 offers convenient, modular-design technology in a harmonious unobtrusive design. Installation of the low-volt system downstream from the power pack can easily be carried out on the spot. The push button operation controls can be integrated into prepared empty electrical boxes in the walls with a flush-mounting and therefore concealed power pack.Blind units fitted in suspended ceilings can be powered by top-mounting motor units. The basic modules push button switch, timer and 10-channel infrared remote control can be combined at will and can be retro fitted to existing DECOMATIC® Verticals.Larger blind systems with a module for group control or master control can easily be assembled from the individual system modules.Furthermore, DECOMATIC® permits several master controls to be interlinked.Additional system components for example the external keyswitch or the solar detector with timer function enhance operating convenience even further in large buildings.

DECOMATIC®

Unit Variants

Installation optionsThe DECOMATIC® brackets are designed in such a way that a growing tensile load causes the bracket to grip increasingly tightly in the supporting groove of the trackThe permanent elasticity of the top fix brackets is ensured by the use of corrosion-resistant V2A steel.

Mounting with top fix brackets (oval hole, raised)4mm wide shadow-gap joint between track and ceiling. For mounting on non-flat ceilings.

Mounting with top fix brackets (flat)Without shadow gap - for mounting on flat ceilings.

Mounting (brackets with screw)For mounting in soft or suspended ceilings (brackets cannot press into the ceiling and ceiling plate cannot be forced upwards by the track).Material: Aluminium, anodised.

Mounting the recess profileAluminium, anodised or white powder-coated. Max profile length: 6m

Mounting the recess profile with support for recess profile. The bracket can be lengthened upwards at will by a threaded spindle

Mounting the recess profile with a face fix bracket (adjustable)

DECOMATIC®

Installation

Besides the comprehensive range of build types and wide spectrum of operating mechanisms, the DECOMATIC® Vertical System offers different installation possibilities that permit the verticals to be adapted to any architectural shape.The especially small dimensions of the DECOMATIC® track (only 40x25mm) allow it to be integrated unobtrusively anywhere. The adjustable face fix DECOMATIC® ensures the possibility of installing the blinds in front of existing fixtures and fittings. The recess profile with brackets has been especially developed for suspended ceilings. Designed to match this is the top-mounting motor that is fitted concealed above the track.

Guide TrackAluminium AIMgSi 0.5 F22, anodised according to DIN 17611, or powder coated in white or brown. The end caps, operating elements and brackets are selected to match the colour of the track. Special colours in RAL shades for the profiles are available on inquiry.

Mounting with face fix bracketsDistance adjustment ranges: 60-108mm / 108-156mm / 156-204mm.

Decomatic© Aluminium-louvres: Harmony of the materials indoors and out.

DECOMATIC®

Reliable system technology

The DECOMATIC® compatible system using travellers with integrated slipping clutch and stainless steel spacers that has proven itself in practice world wide, ensures a wide range of possible applications. The specially developed modular technology permits not only precise adaptation to standard room dimensions but also the harmonious design of exclusive environments for domestic and commercial applications. Besides the standard gearing systems, both easy running mono gear with ball chain and the motorised version offer the greatest simplicity of operation. More than 20 different blind types and shapes, different louvre stacking variants and operating mechanisms located either left of right contribute to this perfect synthesis of decoration, sun protection and architecture.

Louvre Stackingleft "L"

Louvre Stackingright "R"

Louvre Stackingcentre "C"

Louvre Stackingsplit "S"

Tilt with ball and chain sideways travel with a cord pull.

Tilt and sideways travel with a ball chain.

Tilt and sideways travel with a traversing wand

Traveller with replaceable hook and built-in slipping clutch.

Louvre Stacking Variants(Exact stacking dimensions can be advised.)

Standard blind units are available in four different versions.

For slopes up to 55o slope units with an integrated cord lock.

With travellers with spring for roof windows and skylights.

Adapts to fit around arches from a minimum radius of 500mm.

Standard blind units can be combined to form one and two-wing bay window units. These adapt to match window corners of all angles.

Horizontally curved units round out the range with sun protection solutions for old or modern buildings with a single operating mechanism.

Crimple Court, Hornbeam Park, Harrogate, North Yorkshire HG2 8PBTel: +44 (0)1423 873002 Fax: +44 (0)1423 874006

DECOMATIC®

Product Specification - VerticalsDECOMATIC® STANDARD UNIT

System 9800/W

Drive type:Manual operation with chain and cord.Further operation options are possible:Planetary gear 4:1

Guide track:Extruded aluminium (AI Mg Si 0.5 F22), Anodised to E6/EV1 or powder-coated white (RAL 9016), brown (RAL 8077), black (RAL 9005);Special colours are also possible.Dimensions: 40mm x 25mm x 6m (W x H x L).

Tilting shaft: Extruded aluminium (AI Mg Si 0.5 F25).Torsion-resistant, single groove profile, 0 6mm.Stabilisation through stationary shaft support.

Traveller:Maximum width 80 travellers.With outrigger/stabiliser.Wear-resistant synthetic material (polyacetal), roller bearings, integrated safety clutch.Louvre hooks (polycarbonate) capable of subsequent removal and replacement.Stainless steel spacing element (material 1.4310).Travellers are 8.4mm wide, self lubricated for life.

Operation unit (see alternatives):Operation left or right possible.Wear-resistant synthetic material (polyacetal) in the colour of the track.180o tilting of the louvres by means of a plastic ball chain.Sideways travel by means of a pull cord held taut by means of cord weights.

Louvre hanging:Hanging quality: as per Goelst UK collection.Free hanging louvres.Louvre stack can be repositioned for cleaning the window.Option of louvre stack position left, right, centre or split.All plastic bottom weights and spacing chains with tilting mechanisms align the louvres that are suspended fromwelded-in louvre holders (polycarbonate) both parallel and vertically.

ALTERNATIVES

Type 9900/WManual Operation, Mono Gear

Drive Type:Manual single-control element operation.Operation unit:Operation left or right possible.Wear-resistant synthetic material (polyacetal) in the colour of the track.180o tilting of the louvres and sideways travel by means of a continuous loop chain.

Type 9900/WManual Operation, Traversing Wand

Drive Type:Manual single-control element operation.Operation unit:Operation left or right possible.Wear-resistant synthetic material (polyacetal) in the colour of the track.180o tilting and sideways travel by means of a wand.The operating wand swivels out of the tilting area of the louvre; this ensures the same minimum light gap on both sides.

Type 9900/W/EMotorised

Drive Type:Motorised tilting and sideways travel.Further drive options are possible:Top mounted motor, Mono motorDrive unit:The colour matched drive unit is mounted concealed behind the track. One motor for tilting and sideways travel, 12V with planetary gear, in a joint aluminium profile with end caps of wear resistant synthetic material (polyacetal).180o tilting with automatic overload cutout.Sideways travel by means of a special drive chain (approx 6m/min) and end positions set at the makers factory with automatic partial tilting (25o) against louvre damage. Operating options with control switch, timer, 10-channel infrared remote control (with emergency operation facility), key-operated switch or solar detector or combinations of these.Choice between individual, group and central controls or integration into a bus system.

C1/SfB

(76.7)

The Complete Vertical System.Vertically curved unitsHorizontally curved unitsSlope unitsBay window unitsTop and bottom track unitsStandard units

DECOMATIC®

Modular system designMany operational variantsMotor system with numerous control options

DecomaticVertical Blind

Systempresented by