2019Dealer Price Book

E�ective December 1, 2018

MiniMax Flail Mower

MM48 ............................................. MiniMax Mower ................................................ List Price .......... $3,795MM60 ............................................. MiniMax Mower ................................................ List Price .......... $3,995MM72 ............................................. MiniMax Mower ................................................ List Price .......... $4,395

RETAIL PRICING

The Vrisimo MiniMax Flail Mower is an affordable, versatile and popular addition to any landowner’s tool kit. It is a lightweight mower that provides maximum cutting power and can be mounted on the front or back of most small tractors. This durable and reliable mower requires low horsepower and has a 1” cutting capacity.

48”56.25”

244824

0-3.5”45018

72”80.25“

367236

0-3.5”49022

60”68.25”

306030

0-3.5”47020

Cutting WidthOverall Width (Approx.)

Number of Scoop Knives Number of Industrial KnivesNumber of Dethatching KnivesRear Height AdjustmentMachine Weight (US pounds)

H.P. Required (Approx.)

MODEL MM48 MM60 MM72

Skid Shoes ............................................................... $145Dethatching Knives .................................................. $145

Industrial Knives ................................................... $145OPTIONS

KEY FEATURESAffordable - High quality flail mower at a price everyone can affordAdjustable Hitch - Hook up center-mounted or with a 6-inch offsetAdjustable Cutting Heights - Adjustable rear roller 0-3.5”Skid Shoes (Optional) - Prevents end plate damage & are replaceableDrive System - Front or rear mount, PTO drive

Mighty Max Flail Mower

C172 ............................................. Mighty Max Mower ............................................ List Price .......... $5,600C184 ............................................. Mighty Max Mower ............................................ List Price .......... $6,100C196 ............................................. Mighty Max Mower ............................................ List Price .......... $6,400

RETAIL PRICING

The Vrisimo Mighty Max Flail Mower is the ideal tool to keep small orchards manicured. It is a durable tool that efficiently cuts and mulches grass, leaves and other debris to create a smooth, sanitary orchard surface. It comes in three cutting widths ranging from 72” to 96“. Cutting capacity .5-1.0”

70”80”3366331-6”7452

94”104“459045

0-6”88528

82”92”397839

0-6”81526

Cutting WidthOverall Width (Approx.)

Number of Scoop Knives Number of Industrial KnivesNumber of Dethatching KnivesRear Height AdjustmentMachine Weight (US pounds)

H.P. Required (Approx.)

MODEL C172 C184 C196

Dethatching Knives .................................................. $236 Industrial Knives ................................................... $236OPTIONS

KEY FEATURES3 Knife Choices - Scoop, industrial and dethatching knives availableAdjustable Hitch - Hook up center-mounted or with a 6-inch offsetAdjustable Cutting Heights - Adjustable rear roller 0-6”Skid Shoes - Prevents end plate damage & are replaceable

Super Series Flail Mower

SC174 ............................................. Super Series Mower .......................................... List Price .......... $7,700SC188 ............................................. Super Series Mower .......................................... List Price .......... $8,000SC1100 ........................................... Super Series Mower .......................................... List Price .......... $8,300SC1120 ........................................... Super Series Mower .......................................... List Price .......... $9,000

RETAIL PRICING

The Vrisimo Super Series Flail Mower provides a bit more cutting capacity than the Mighty Max and MiniMax and is also configured standard with a dual hitch, meaning it is offset and center mount in one mower. With added cutting width and power, it’s a great option to keep orchard floors or pastures in top shape. Cutting capacity .5-1.0”

Cutting WidthOverall Width (Approx.)

Number of Scoop Knives Number of Industrial KnivesNumber of Dethatching KnivesRear Height AdjustmentMachine Weight (US pounds)

H.P. Required (Approx.)

MODEL74”84”367236

0-6”980

30-50

SC17488”98”397839

0-6”1,09530-50

SC188100”110”459045

0-6”1,23040-60

SC1100120”130“54

10854

0-6”1,44540-60

SC1120

Dethatching Knives .................................................. $280 Industrial Knives ................................................... $280OPTIONS

KEY FEATURES3-Point Hitch - Category 1 A-frame assures power and controlAdjustable Hitch - Hook up center-mounted or with a 6-inch offsetAdjustable Cutting Heights - Adjustable rear roller 0-6”Skid Shoes - Prevents end plate damage & are replaceable

Orchard LP Flail Mower

LP2084 ........................................ Orchard LP Mower ................................................ List Price .......... $11,600LP2096 ........................................ Orchard LP Mower ................................................ List Price .......... $12,000LP2108 ........................................ Orchard LP Mower ................................................ List Price .......... $12,100LP2120 ........................................ Orchard LP Mower ................................................ List Price .......... $12,200LP2132 ........................................ Orchard LP Mower ................................................ List Price .......... $12,600LP2144 ........................................ Orchard LP Mower ................................................ List Price .......... $12,800LP2156 ........................................ Orchard LP Mower ................................................ List Price .......... $13,100LP2168 ........................................ Orchard LP Mower ................................................ List Price .......... $13,400LP2180 ........................................ Orchard LP Mower ................................................ List Price .......... $13,900

Wheel Kit ............................................................... $2,325Dethatching Knives ................................................ $475Industrial Knives .................................................... $450

Front and Rear 3 Point ........................................... $2,9758” Back Roller ........................................................ $350Rear Roller Scraper ................................................ $475

OPTIONS

RETAIL PRICING

The Vrisimo Orchard LP Flail Mower is the right tool to maintain an orchard from early spring up to harvest. This flail mower ranges in size from 7 feet to 15 feet and features a 90-horsepower gearbox. It is a durable tool that efficiently cuts and mulches grass, leaves and other debris to create a smooth, sanitary orchard surface.

SuperTuf scoop knives create a vacuum effect, lifting debris and vegetation for improved mulching. Quick change hangers are standard for easy knife changes, saving time and money. The adjustable rear roller ensures uniform cutting height. The electronically balanced, 8-inch rotating cutter drum combines power with smooth operation. Wear liners are standard for longer life. Cutting capacity .5-1”

Orchard LP Flail Mower

7’8’4080

0-6”1,770

40

15’16’92

1840-6”

2,73075

14’15’84

1680-6”

2,61070

13’14’76

1520-6”

2,49065

12’13’68

1360-6”

2,37060

11’12’60

1200-6”

2,25055

10’11’56

1120-6”

2,14050

9’10’4896

0-6”2,010

50

8’9’4488

0-6”1,890

45

Cutting WidthOverall Width (Approx.)

Scoop Knives #Industrial Knives #Rear Height AdjustmentMachine Weight (US pounds)

H.P. Required (Approx.)

*Offset not available

MODEL LP2084 LP2096 LP2108 LP2120 LP2132 LP2144* LP2156* LP2168* LP2180*

KEY FEATURES8” Back Roller (Optional) - Keeps roller bearings protected and closes off rear discharge areaAbrasion Resistant Liner - To withstand harsh environments and be easily replacedSuperTuf Scoop Knives and Hangers - Quality, American-made materialsQuick-Change Hangers - Makes replacing knives easyCat-2 A-Frame - Available center-mounted or with an 11-inch offsetAdjustable Height - Rear roller adjusts from 0 to 8 inchesMatching 5VX Series Belt and Pulley - Provides optimal power transferLow-Profile Shield - Overall shield height just 24 inches on both endsDouble-Row Spherical Bearing - Self-aligning, high-capacity, with high-temperature Teflon grease seal lasts longer. Ideally suited for shock loading and heavy duty environments.

Heavy Duty Wheel Kit ............................................ $1,795Hammer Knives, 2 lbs each .................................... $750

Rear Roller Scraper ................................................ $225OPTIONS

Cutting WidthOverall Width (Approx.)

Number of Knives Rear Height AdjustmentBrush RakesMachine Weight (US pounds)

H.P. Required (Approx.)

MODEL4’5’28

0-6”8

1,32045

S-300-4 S-300-55’6’32

0-6”9

1,42050

S-300-66’7’40

0-6”11

1,56055

7’8’48

0-6”13

1,62060

S-300-7

S-300 Series Brush Shredder

The Vrisimo 300 Series Brush Shredder  is perfect for light to medium projects in orchards and vineyards. Standard features such as adjustable rear roller and rear rake tines are ideal for thorough brush mulching. Comes standard with internal wear liners for longer life. Cutting capacity 2-3”

KEY FEATURESToughness - Severe Duty Design. High HP ComponentsTrue Shaft Technology - Electronically Balanced Cutter Drum with Serviceable HubsInternal Wear Liners - Made of Abrasion-Resistant MaterialFlail Knives - 2 x 1.5 lb Knives at Each Station Adds Power and Extra Cutting SurfaceHitch - Works with Category 1 and Category 2 Adjustable HitchesWheel Kit (Optional) - Replaces Rear Roller to Hydraulically Control Height Adjustments

RETAIL PRICINGS-300-4’ ........................................ Brush Shredder .................................................. List Price ....... $9,800S-300-5’ ........................................ Brush Shredder .................................................. List Price ....... $10,200S-300-6’ ........................................ Brush Shredder .................................................. List Price ....... $10,500S-300-7’ ........................................ Brush Shredder .................................................. List Price ....... $10,800

Heavy Duty Wheel Kit ............................................ $1,795Front Deflector ....................................................... $375Rear Deflector ........................................................ $375

Rear Roller Scraper ................................................ $2258” Large Back Roller .............................................. $275

OPTIONS

6’7’

40 Slicer | 20 Center0-6”11

1,71560

8’9’

56 Slicer | 28 Center0-6”15

2,01580

S-500-7Cutting WidthOverall Width (Approx.)

Number of Knives Rear Height AdjustmentBrush RakesMachine Weight (US pounds)

H.P. Required (Approx.)

MODEL S-500-67’8’

48 Slicer | 24 Center0-6”13

1,85070

S-500-8

S-500 Series Brush Shredder

The Vrisimo 500 Series Brush Shredder uses our triple knife setup which features two 2.25-pound slicing knives plus a 2 pound straight knife at each station. This brush shredder comes standard with internal wear liners and an internal re-cutter bar. Cutting capacity 3-4”

KEY FEATURESToughness - Severe Duty Design. High HP ComponentsTrue Shaft Technology - Electronically Balanced Cutter Drum with Serviceable HubsInternal Wear Liners - Made of Abrasion-Resistant MaterialTriple Flail Knives - Reversible 2.25 lb. Slicer Knives plus a 2 lb. Straight Knife for 7 lbs of knife at Each StationHitch - Works with Category 1 and Category 2 Adjustable HitchesWheel Kit (Optional) - Replaces Rear Roller to Hydraulically Control Height Adjustments

RETAIL PRICINGS-500-6’ ........................................ Brush Shredder .................................................. List Price ....... $12,700S-500-7’ ........................................ Brush Shredder .................................................. List Price ....... $14,200S-500-8’ ........................................ Brush Shredder .................................................. List Price ....... $15,000

S-900 Series Brush Shredder

The Vrisimo S-900 Brush Shredder brings the most muscle to the toughest jobs. This 3,350 pound, dual drive shredder will pulverize brush up to 5” diameter. Comes equipped with multiple wear liners and re-cutter bars. Hydraulic height control is standard. Cutting capacity 4-5”

KEY FEATURESTriple Flail Knives - Reversible 2.25 lb. Slicer Knives plus a 2 lb. Straight Knife for 7 lbs of knife at Each StationDrum - Heavy-Duty 10” Diameter .5” Thick for Tougher TasksPower - Constant Velocity Drive LineTorque - 1,000 RPM Gearbox availableTrue Shaft Technology - Electronically Balanced Cutter Drum with Serviceable HubsInternal Wear Liners - Made of Abrasion-Resistant MaterialAdjustable Cutting Heights - Adjustable Rear Wheels and Pick-Up TinesAdjustable Hitch - Level Brush Shredder to Optimize Cut Angle

7’8’ 7”

56 Slicer | 28 Center0-12”

63,175

80

9’10’ 7”

72 Slicer | 36 Center0-12”

83,515100

S-900-8Cutting WidthOverall Width (Approx.)

Number of Knives Rear Height AdjustmentBrush Rakes, Cam LiftMachine Weight (US pounds)

H.P. Required (Approx.)

RETAIL PRICINGS-900-7’ ........................................ Brush Shredder .................................................. List Price ....... $22,900S-900-8’ ........................................ Brush Shredder .................................................. List Price ....... $24,000S-900-9’ ........................................ Brush Shredder .................................................. List Price ....... $25,100

MODEL S-900-78’

9’ 7”68 Slicer | 34 Center

0-12”7

3,35090

S-900-9

Sanitizer Orchard Flail Mower

The Vrisimo Sanitizer Orchard Flail Mower allows nut growers to start the spring with a clean orchard. It turns small pruning material, grass and other organic matter into a fine mulch. The Sanitizer also helps control pests like navel orange worm in almond, walnut and pistachio orchards.

KEY FEATURES8” Back Roller - Keeps roller bearings protected and closes off rear discharge areaBolt-in Abrasion Resistant Liner - To withstand harsh environments and be easily replacedTriple Flail Knives - Reversible .66 lb. Slicer Knives plus a .5 lb. Straight Knife for 2 lbs of knife at Each StationInternal Regurgitation Liner - Further closes off the discharge area for maximum mulchingBolt-in Breaker Bar - Disrupts path of debris for added destruction and redistribution into the knife pathAdjustable Height - Rear roller adjusts from 0 to 4 inchesLow-Profile Shield - Overall shield height around 30 inches on both ends depending on rear roller height

10’11’ 10”

116 Slicer | 58 Center0-4”540

2,79075

12’13’ 10”

148 Slicer | 74 Center0-4”540

3,26485

Cutting WidthOverall Width (Approx.)

Number of Knives Rear Height AdjustmentInput PTO R.P.M.Machine Weight (US pounds)

H.P. Required (Approx.)

RETAIL PRICINGSM2120-10’ ................................ Sanitizer Orchard Flail Mower ................................... List Price ....... $14,500SM2144-12’ ................................ Sanitizer Orchard Flail Mower ................................... List Price ....... $15,250

MODEL SM2120-10 SM2144-12

Pulverizer LT Crop Flail Mower

The Vrisimo Pulverizer LT Crop Mower makes it easier and faster to tame that thick, overgrown cover crop. When fine-cut mulching is a must, the Pulverizer LT is at its best. Efficiently transform dense vegetation into a closely mown field. Cutting capacity 1-2”

KEY FEATURESHeavy Duty Wheel Kit - Replaces rear roller to hydraulically control height adjustmentsPull Hitch - Clevis pin mount is ideal for quickly and easily hitchingAbrasion Resistant Liner - To withstand harsh environments and be easily replacedHeavy Duty Side Slicer Knives - More weight, more momentum, more destructionAdjustable Height - Rear roller adjusts from 0 to 12 inches

12’13’68

1360-12”2,870

60

Cutting WidthOverall Width (Approx.)

Number of Scoop Knives Number of Industrial Knives Rear Height AdjustmentMachine Weight (US pounds)

H.P. Required (Approx.)

RETAIL PRICINGCM2144 .................................................... Crop Flail Mower ............................................ List Price ....... $15,250

MODEL CM2144

Roadsider 300-Series Mower

The Vrisimo Roadsider 300 Series Mower is the perfect severe duty flail mower to perform vegeta-tion control along the roads. This machine ranges in size from 6 to 8 feet and features an adjustable rear roller, reverse drum rotation, and rear flaps to increase safety. Exceeds SAE J1001 standards. 

KEY FEATURESSafety - Exceeds CalTrans SAE J1001 Standard Toughness - Severe Duty Design. High HP ComponentsTrue Shaft Technology - Electronically Balanced Cutter Drum with Serviceable HubsInternal Wear Liners - Made of Abrasion-Resistant MaterialFlail Knives - 2 x 1.5 lb Knives at Each Station Adds Power and Extra Cutting SurfaceHitch - Works with Category 1 and Category 2 Adjustable Hitches

Cutting WidthOverall Width (Approx.)

Number of Industrial Knives Rear Height AdjustmentInput PTO R.P.M.Machine Weight (US pounds)

H.P. Required (Approx.)

RETAIL PRICINGRSS300-72 ............................................. Roadsider Mower ............................................. List Price ....... $9,763RSS300-88 ............................................. Roadsider Mower ............................................. List Price ....... $10,040RSS300-96 ............................................. Roadsider Mower ............................................. List Price ....... $10,314

MODEL72”82”48

2-10”540

1,45040

RSS300-7296”

106”64

2-10”540

1,62560

RSS300-9688”98”56

2-10”540

1,55050

RSS300-88

Hammer Knives, 2 lbs each .................................... $972OPTIONS

Cutting WidthOverall Width (Approx.)

Number of Knives FlangeRecutter Bars

MODEL24”34”

12 Slicer | 6 Center½“ Holes 8” Apart

2 internal ¼"

DS24 DS3030”40”

18 Slicer | 9 Center½“ Holes 8” Apart

2 internal ¼"

DS3636”46”

24 Slicer | 12 Center½“ Holes 8” Apart

2 internal ¼"

40”50”

24 Slicer | 12 Center½“ Holes 8” Apart

2 internal ¼"

DS40

Stationary Debris Shredder

The Vrisimo DS Series Stationary Debris Shredder is an inline waste shredder for precleaning and mummy densification. Great for reducing waste volume while creating compostable mulch. Features and electronically balanced cutter drum for vibration free operation.

KEY FEATURESReduce Waste - Minimize volume quickly and efficiently while creating compostable mulch.Electric Motor - 20 horsepower electric motor allows for easy intergration into almost any processing lineTriple Flail Knives - Reversible 2.25 lb. Slicer Knives plus a 2 lb. Straight Knife for 7 lbs of knife at Each StationTrue Shaft Technology - Electronically Balanced Cutter Drum with Serviceable Hubs

RETAIL PRICINGDS24 .................................................. Debris Shredder .................................................... List Price ....... $10,550DS30 .................................................. Debris Shredder .................................................... List Price ....... $10,650DS36 .................................................. Debris Shredder .................................................... List Price ....... $10,750DS40 .................................................. Debris Shredder .................................................... List Price ....... $10,850

3200 Tully Road, Hughson, CA 95326

Exclusively Distributed By:

209.883.2817www.grossifabrication.com

LIMITED 12 MONTH WARRANTYFor a period of 12 months from date of delivery of product to the original user/owner, Valley Tool & Mfg. warrants each product to be free from manufacturing defects, subject to the limitations contained in this policy.

This warranty does not apply to defect caused, in whole or in part, by unreasonable use while in the possession of the user, including, but not limited to: failure to properly set up product; failure to provide reasonable and necessary maintenance; normal wear; routine tune ups or adjustments; improper handling or accidents; operation at speed or load conditions contrary to published specification; improper or insufficient lubrication; improper storage. This warranty is also not a guarantee that the performance of each product will meet the expectations of the purchaser.

Valley Tool & Mfg. shall not be liable for consequential damages of any kind, including, but not limited to: consequential labor costs or transportation charges in connection with the replacement or repair of defective parts; lost time or expense which may have accrued because of said defects. In no event shall Valley Tool & Mfg. total liability hereunder exceed the product purchase price.

Valley Tool & Mfg. makes no warranty with respect to trade accessories or any components or accessory of the product which was not manufactured by Valley Tool & Mfg., including any purchased components of any kind. These are subject to the warranties of their respective manufacturers. The warranty will be considered void if the product or any part of the product is modified or repaired in any way not expressly authorized by Valley Tool & Mfg., or if closed components are disassembled prior to return. Closed components include, but are not limited to: gearboxes, hydraulic pumps, motors, cylinders, and actuators.

Our obligation under the warranty is expressly limited, at our option, to the replacement or repair at Valley Tool & Mfg., of Hughson CA, or at a service facility designated by us, or such part or parts as inspection shall disclose to have been defective. We are not responsible for unauthorized repairs or replacements. Warranty must be pre approved. Authorized parts will be sent to dealer 2nd day UPS at no charge. Any implied or statutory warranties, including any warranty merchantability or fitness for a particular purpose, are expressly limited to the duration of this written warranty. We make no other express or implied warranty, nor is anyone authorized to make any on our behalf. This warranty cannot be extended, broadened, or changed except in writing by an authorized officer of Valley Tool & Mfg. No warranty will be processed without the timely registration of the signed “Delivery Report”.

Travel time of mechanics and transportation of the product to the authorized service dealer for warranty work are the responsibility of the attachment owner.

Valley Tool & Mfg offers the most reasonable and dealer -friendly return policy in the market. Below we have included the return policies for each of our brands. We will accept returns within 30 days of original receipt. All returns must be approved by Valley Tool & Mfg and a return authorization number must be issued prior to return shipment. Returns must be received in "like-new" condition and with all of the original factory packaging including manuals. Additional charges will apply if an item is received that is not in "like-new" condition or that is not in original factory packaging. After a return has been fully inspected by our staff, refunds will issued less shipping charges and any other possible damage fees. Please allow up to 30 business days for your account refund credit to be processed.

Please direct all return-related questions to sales@valleytoolmfg.com.

30EX Brush Flail Mower

30EX ................................................. Brush Flail Mower .................................................. List Price .......... $8,350

RETAIL PRICING

The BrushHound 30EX Brush Flail Mower safely cuts and mulches small trees grass and brush. It easily attaches to the smallest excavators and backhoes to quickly convert them into long-reach boom mowers to clear high vines and trees to the ground. Cutting capacity .5-3.5”

KEY FEATURESThumb Saddle - Serrated edge works with excavator thumb to grab & remove debris or obstaclesTriple Flail Knives - Reversible 2.25 lb. Slicer Knives plus a 2 lb. Straight Knife for 7 lbs of knife at Each StationTrue Shaft Technology - Electronically Balanced Cutter Drum with Serviceable HubsWire Proof Bearing Protectors - Protect drive components from being wrapped with wire or rope Exceeds SAE J1001 Standards - Durability & safety test for flail mowers Composite Dampener Washer - Protects hydraulic motor from shock forces

PDI CHECKLISTUniversal Bolt on Mount Included - We Make it to Fit Your Excavator100” Hydraulic Hoses with Flat Faced Couplers Included - Ready to Operate Right Off the Pallet Relief Pressure - Set Auxiliary Pressure to 3,350 psiTag® or Wainroy® Mounts - Additional $850

30”56”

792 lbs18 Slicer | 9 Center

12 GPM3.5”Gear

Cutting WidthOverall Width (Approx.)

Machine Weight (US pounds)

Number of Knives Aux. Flow Required (Min.)

CapacityMotor Type

MODEL 30EX30”56”

860 lbs18 Slicer | 9 Center

16 GPM4”

Gear

30EXHD40”63”

815 lbs12 Hammer

12 GPM4”

Gear

40EX40”67”

1,170 lbs24 Slicer | 12 Center

25 GPM5”

Piston

40EXHD50”80”

1,670 lbs15 Hammer

30 GPM6”

Piston

50EXHD

Recommended for machines from 8,000 to 13,000 pounds

30EX-HD Brush Flail Mower

30EX-HD ........................................... Brush Flail Mower ................................................. List Price .......... $9,899

RETAIL PRICING

The BrushHound 30EX-HD Brush Flail Mower is a compact heavy duty brush mower that cuts and mulches small trees, heavy grass and brush. This affordable cutter is like having your own crew of workers with chainsaws. It is the highest performance brush mower available for 5-ton sized excavators. Cutting capacity .5-4”.

KEY FEATURESExtra-Strength Thumb Saddle - Serrated edge works with excavator thumb to grab & remove debris Triple Flail Knives - Reversible 2.25 lb. Slicer Knives plus a 2 lb. Straight Knife for 7 lbs of knife at Each StationTrue Shaft Technology - Electronically Balanced Heavy Duty Cutter Drum with Serviceable HubsWire Proof Bearing Protectors - Protect drive components from being wrapped with wire or rope Exceeds SAE J1001 Standards - Durability & safety test for flail mowers Composite Dampener Washer - Protects hydraulic motor from shock forces

PDI CHECKLISTUniversal Bolt on Mount Included - We Make it to Fit Your Excavator100” Hydraulic Hoses with Flat Faced Couplers Included - Ready to Operate Right Off the Pallet Relief Pressure - Set Auxiliary Pressure to 3,350 psiTag® or Wainroy® Mounts - Additional $850

30”56”

792 lbs18 Slicer | 9 Center

12 GPM3.5”Gear

Cutting WidthOverall Width (Approx.)

Machine Weight (US pounds)

Number of Knives Aux. Flow Required (Min.)

CapacityMotor Type

MODEL 30EX30”56”

860 lbs18 Slicer | 9 Center

16 GPM4”

Gear

30EXHD40”63”

815 lbs12 Hammer

12 GPM4”

Gear

40EX40”67”

1,170 lbs24 Slicer | 12 Center

25 GPM5”

Piston

40EXHD50”80”

1,670 lbs15 Hammer

30 GPM6”

Piston

50EXHD

Recommended for machines from 10,000 to 16,000 pounds

40EX Brush Flail Mower

40EX HammerHead ............................ Brush Flail Mower .............................................. List Price .......... $9,860

RETAIL PRICING

The BrushHound 40EX “HammerHead” Brush Flail Mower has a bite worthy of its name. It is a powerful chopping tool that can safely reduce a medium-sized tree to mulch in just minutes. It is equally effective on shrubs and other vegetation. The 40EX is designed to be used on a variety of compact and medium-sized backhoes and excavators. Cutting capacity .5-4”

KEY FEATURESHammer Knife - Forged, one-piece, 3-pound, sharpened hammer knives provides maximum versatilityExtra-Strength Thumb Saddle - Serrated edge works with excavator thumb to grab & remove debris True Shaft Technology - Electronically Balanced Cutter Drum with Serviceable HubsWire Proof Bearing Protectors - Protect drive components from being wrapped with wire or rope Exceeds SAE J1001 Standards - Durability & safety test for flail mowers Composite Dampener Washer - Protects hydraulic motor from shock forces

PDI CHECKLISTUniversal Bolt on Mount Included - We Make it to Fit Your Excavator100” Hydraulic Hoses with Flat Faced Couplers Included - Ready to Operate Right Off the Pallet Relief Pressure - Set Auxiliary Pressure to 3,350 psiTag® or Wainroy® Mounts - Additional $850

30”56”

792 lbs18 Slicer | 9 Center

12 GPM3.5”Gear

Cutting WidthOverall Width (Approx.)

Machine Weight (US pounds)

Number of Knives Aux. Flow Required (Min.)

CapacityMotor Type

MODEL 30EX30”56”

860 lbs18 Slicer | 9 Center

16 GPM4”

Gear

30EXHD40”63”

815 lbs12 Hammer

12 GPM4”

Gear

40EX40”67”

1,170 lbs24 Slicer | 12 Center

25 GPM5”

Piston

40EXHD50”80”

1,670 lbs15 Hammer

30 GPM6”

Piston

50EXHD

Recommended for machines from 12,000 to 16,000 pounds

40EX-HD Brush Flail Mower

40EX-HD ............................................ Brush Flail Mower .............................................. List Price .......... $16,508

RETAIL PRICING

When maximum brush clearing is the goal, the BrushHound 40EX-HD Brush Flail Mower is the robust tool of choice for professionals. It can safely and quickly turn a tree, brush pile or woody area to mulch in minutes. The 40EX HD transforms backhoes and excavators into powerful shredders and long-reach boom mowers. Cutting capacity .5-5”

KEY FEATURESExtra-Strength Thumb Saddle - Serrated edge works with excavator thumb to grab & remove debris Triple Flail Knives - Reversible 2.25 lb. Slicer Knives plus a 2 lb. Straight Knife for 7 lbs of knife at Each StationTrue Shaft Technology - Electronically Balanced Heavy Duty Cutter Drum with Serviceable HubsWire Proof Bearing Protectors - Protect drive components from being wrapped with wire or rope Exceeds SAE J1001 Standards - Durability & safety test for flail mowers Composite Dampener Washer - Protects hydraulic motor from shock forces

PDI CHECKLISTUniversal Bolt on Mount Included - We Make it to Fit Your Excavator100” Hydraulic Hoses with Flat Faced Couplers Included - Ready to Operate Right Off the Pallet Relief Pressure - Set Auxiliary Pressure to 4,500 psi or less. Case drain line required.Tag® or Wainroy® Mounts - Additional $850

30”56”

792 lbs18 Slicer | 9 Center

12 GPM3.5”Gear

Cutting WidthOverall Width (Approx.)

Machine Weight (US pounds)

Number of Knives Aux. Flow Required (Min.)

CapacityMotor Type

MODEL 30EX30”56”

860 lbs18 Slicer | 9 Center

16 GPM4”

Gear

30EXHD40”63”

815 lbs12 Hammer

12 GPM4”

Gear

40EX40”67”

1,170 lbs24 Slicer | 12 Center

25 GPM5”

Piston

40EXHD50”80”

1,670 lbs15 Hammer

30 GPM6”

Piston

50EXHD

Recommended for machines from 16,000 to 24,000 pounds

50EX-HD Brush Flail Mower

50EX-HD .......................................... Brush Flail Mower .............................................. List Price .......... $19,875

RETAIL PRICING

The BrushHound 50EX-HD Brush Flail Shredder is the ultimate in tree- and brush-clearing power. Its quality and toughness are the industry standard. It can reduce medium-sized trees, shrubs and vegetation to mulch safely and efficiently. The largest in the EX series, it is designed to withstand the forces of a 10- to 25-ton excavator. Cutting capacity .5-6”

KEY FEATURESExtra-Strength Thumb Saddle - Serrated edge works with excavator thumb to grab & remove debris Hammer Knife - Forged, one-piece, 5-pound, sharpened hammer knives provides maximum versatilityTrue Shaft Technology - Electronically Heavy Duty Balanced Cutter Drum with Serviceable HubsWire Proof Bearing Protectors - Protect drive components from being wrapped with wire or rope Exceeds SAE J1001 Standards - Durability & safety test for flail mowers Composite Dampener Washer - Protects hydraulic motor from shock forces

PDI CHECKLISTUniversal Bolt on Mount Included - We Make it to Fit Your Excavator100” Hydraulic Hoses with Flat Faced Couplers Included - Ready to Operate Right Off the Pallet Relief Pressure - Set Auxiliary Pressure to 4,500 psi or less. Case drain line required.Tag® or Wainroy® Mounts - Additional $850

30”56”

792 lbs18 Slicer | 9 Center

12 GPM3.5”Gear

Cutting WidthOverall Width (Approx.)

Machine Weight (US pounds)

Number of Knives Aux. Flow Required (Min.)

CapacityMotor Type

MODEL 30EX30”56”

860 lbs18 Slicer | 9 Center

16 GPM4”

Gear

30EXHD40”63”

815 lbs12 Hammer

12 GPM4”

Gear

40EX40”67”

1,170 lbs24 Slicer | 12 Center

25 GPM5”

Piston

40EXHD50”80”

1,670 lbs15 Hammer

30 GPM6”

Piston

50EXHD

Recommended for machines from 22,000 to 40,000 pounds

FX26 Defender Forestry Mulcher

FX26 ................................................ Defender Forestry Mulcher ................................. List Price .......... $15,995

RETAIL PRICING

The BrushHound FX26 Defender Forestry Mulcher is the product of years of high-performance brush cutter engineering. It packs a powerful punch in a small package and attaches easily to most compact excavators. It is the perfect tool for property maintenance, to clear a right-of-way or open up a view, or to create a defensible space in areas where wildfires are a threat. Cutting capacity .5-6”.

KEY FEATURESExtra-Strength Thumb Saddle - Serrated edge works with excavator thumb to grab & remove debris Quadco QUAD TOOTH® - Easy to change 1⅝” knives. Rotatable with four positions, one-piece steel alloyTrue Shaft Technology - Electronically Balanced Cutter Drum with Serviceable HubsHydraulic Direct Drive - Increases efficiency, power and torque. Reduces maintenance

PDI CHECKLISTUniversal Bolt on Mount Included - We Make it to Fit Your Excavator100” Hydraulic Hoses with Flat Faced Couplers Included - Ready to Operate Right Off the Pallet Relief Pressure - Set Auxiliary Pressure to 3,350 psi or lessTag® or Wainroy® Mounts - Additional $850

Cutting WidthOverall Width (Approx.)

Machine Weight (US pounds)

Number of Knives Aux. Flow Required (Min.)

CapacityMotor Type

MODEL26”45”

785 lbs21 Quadco 1⅝”

15 GPM6”

Gear

FX2636”67”

1,635 lbs24 Quadco 2”

20 GPM8”

Piston

FX36

Recommended for machines from 8,000 to 16,000 pounds

FX36 Defender Forestry Mulcher

FX36 ................................................ Defender Forestry Mulcher ................................. List Price .......... $20,999

RETAIL PRICING

The BrushHound FX36 Defender Forestry Mulcher is the latest in the Defender line of Mulchers. Engineered to work efficiently with mid-sized excavators it is the perfect tool for property maintenance, to clear a right-of-way, open up a view, or to create a defensible space in areas where wildfires are a threat. It is durable, dependable and easy to maintain. Cutting capacity .5-8”.

KEY FEATURESExtra-Strength Thumb Saddle - Serrated edge works with excavator thumb to grab & remove debris Quadco QUAD TOOTH® - Easy to change 2” knives. Rotatable with four positions, one-piece steel alloyTrue Shaft Technology - Electronically Balanced Cutter Drum with Serviceable HubsHydraulic Direct Drive - Increases efficiency, power and torque. Reduces maintenance

PDI CHECKLISTUniversal Bolt on Mount Included - We Make it to Fit Your Excavator100” Hydraulic Hoses with Flat Faced Couplers Included - Ready to Operate Right Off the Pallet Relief Pressure - Set Aux Pressure to 3,350 psi for Gear Motors, 4,500 psi for Piston Motors. Case drain line required.Tag® or Wainroy® Mounts - Additional $850

Cutting WidthOverall Width (Approx.)

Machine Weight (US pounds)

Number of Knives Aux. Flow Required (Min.)

CapacityMotor Type

MODEL26”45”

785 lbs21 Quadco 1⅝”

15 GPM6”

Gear

FX2636”67”

1,635 lbs24 Quadco 2”

20 GPM8”

Piston

FX36

Recommended for machines from 16,000 to 32,000 pounds

FHX66 Defender Forestry Mulcher

FHX66 .............................................. Defender Forestry Mulcher ............................... List Price .......... $24,995

RETAIL PRICING

The BrushHound FHX66 Defender Forestry Mulcher allows standard flow skid steers and track loaders to become powerful land clearing tools. With its efficient cutter design, it is perfectly suited for property maintenance, right-of-way clearing and creation or maintenance of defensible space in areas where wildfires are a threat. Cutting capacity up to 10" intermittently, 6" continuous.

PDI CHECKLIST100” Hydraulic Hoses with Flat Faced Couplers Included - Ready to Operate Right Off the Pallet Relief Pressure - Set Aux Pressure to 3,350 psi for Gear Motors, 4,500 psi for Piston Motors. Case drain line required.

Cutting WidthOverall Width (Approx.)

Machine Weight (US pounds)

Number of Knives Aux. Flow Required (Min.)

Capacity

MODEL54”66”

2,300 lbs36 Quadco 2”

17 GPM10”

FHX66

5000 psi Piston Motor Upgrade ............................. $2,500Variable Displacement Motor ................................. $4,375

Quadco QUAD TOOTH® Carbide ......................... $1,680OPTIONS

KEY FEATURESRe-Cutter Bars - Dual replaceable re-cutter bars for extra fine mulchAdjustable Re-cutter Door - To control vegetation recycling or increase cutting surface accessQuadco QUAD TOOTH® - Easy to change 2” knives. Rotatable with four positions, one-piece steel alloyHardox Shield - Liner made of Hardox 400 for wear resistance and strengthAdjustable Brush/Tree Bumper - Helps push debris into cutting path

DEMOLITION DOOR REQUIRED FOR OPERATION

POWER UNIT MUST BE EQUIPPED WITH ½” LEXAN® GLASS (OR EQUAL) AND

FALLING OBJECT PROTECTION.

FH-Series Brush Flail Shredder

Front “T” Bar Push Bumper (PICTURED) ......................... $970Reversible Skid Shoes (PICTURED) ................................... $550

5000 psi Piston Motor Upgrade ......................... $2,500½” Thick 8” Adjustable Rear Roller Upgrade ....... $1,750

OPTIONS

60FH ................................................. Brush Flail Mower ................................................ List Price .......... $12,99372FH ................................................. Brush Flail Mower ................................................ List Price .......... $13,37884FH ................................................. Brush Flail Mower ................................................ List Price .......... $14,058

RETAIL PRICING

The BrushHound FH-Series Brush Flail Shredder is designed to effectively cut and mulch heavy vegetation with standard flow power units. They come in three widths – 5, 6 and 7 feet – and can quickly turn brush and saplings into a mulch covered field. Cutting capacity .5-5”.

KEY FEATURESMount - Front-mounted with a Universal Skid Steer Style Mounting PlateTriple Flail Knives - Reversible 2.25 lb. Slicer Knives plus a 2 lb. Straight Knife for 7 lbs of knife at Each StationPower - Hydraulic Motor ProtectionInternal Wear Liners - Made of Abrasion-Resistant AR400 MaterialAdjustable Cutting Heights - Adjustable Ground Roller Height ControlSafety - Push bumper leans small trees and brush over before knives make contact (optional)

60”72”

1,575 lbs0 - 6“

32 Slicer | 16 Center16 GPM

3”

84”96”

1,950 lbs0 - 6”

48 Slicer | 24 Center20 GPM

5”

72FHCutting WidthOverall Width (Approx.)

Machine Weight (US pounds)

Cutting HeightNumber of Knives Aux. Flow Required (Min.)

Capacity

MODEL 60FH 84FH72”84”

1,725 lbs0 - 6”

40 Slicer | 20 Center18 GPM

4”

SHOWN WITH OPTIONAL FEATURES

F-Series Grass Flail Mower

Foam Filled, Caster Style Front Wheel (PICTURED) .......... $996Scoop Knives .......................................................... $225

Dethatching Knives ................................................. $225OPTIONS

48F ............................................... Grass Flail Mower ..................................................... List Price .......... $6,49060F ............................................... Grass Flail Mower ..................................................... List Price .......... $6,73272F ............................................... Grass Flail Mower ..................................................... List Price .......... $6,975

RETAIL PRICING

The BrushHound F-Series Grass Flail Mower is the safest of its kind on the market today. It comes in three widths – 4, 5 and 6 feet – and quickly powers through grass, light brush, and other undergrowth to create a smooth surface in a field or around job sites. Cutting capacity .5-1”.

KEY FEATURESMount - Front-mounted with a Universal Skid Steer Style Mounting PlateAdjustable Cutting Heights - Adjustable Ground Roller Height ControlTrue Shaft Technology - Electronically Balanced Cutter Drum with Serviceable HubsSkid Shoes - Prevents end plate damage and are replaceable

46”56”

637 lbs0 - 6“

42 Industrial8 GPM

1”

72”80”

837 lbs0 - 6“

66 Industrial13 GPM

1”

60FCutting WidthOverall Width (Approx.)

Machine Weight (US pounds)

Cutting HeightNumber of Knives Aux. Flow Required (Min.)

Capacity

MODEL 48F 72F58”68”

722 lbs0 - 6“

54 Industrial10 GPM

1”

SHOWN WITH OPTIONAL FEATURES

RockHound Landscape Rake

72B ...................................................... Landscape Rake .................................................. List Price ....... $7,79572B-3 .................................................. Landscape Rake .................................................. List Price ....... $9,259

KEY FEATURESSimplicity - Hydraulic cylinder opens top cover for easy dumping and gradingEfficiency - Rake bars and cutting edge provide better leveling for longer ground contactEase - Replaceable, bolt-on, reversible high strength tooth bars are standardToughness - High-strength T-1 steel teeth wedged between two “U” bars

72”84”

1550 lbs12

48413 GPM

8”

Working WidthOverall Width (Approx.)

Machine Weight (US pounds)

Number of Tooth Bars Number of Teeth (Total)

Minimum Hydraulic FlowCapacity

72B / 72B-3

Skid Steer Adapter Plate ........................................ $8713.5” x 12” Top Link Cylinder ................................... $750

2Spool Hydraulic Valve w/ D-Tent ........................... $813OPTIONS

MODEL

RETAIL PRICING

The RockHound 72B Landscape Rake is the original skid steer implement designed to remove debris, level ground before sod is laid or prepare seedbeds. It eliminates hand-raking and picks up rocks as small as ¾” as well as most rocks up to 8”.

Model 775 Electrostatic Sprayer

High Volume Dilute Kit ........................................... $2,8852” Fast Fill Kit Valve Option .................................... $486

Manual Controls Option ......................................... $150Non- Electrostatic Option .................................... -$1,200

OPTIONS

Model 775 .......................................... Windmill Spraymaster ........................... List Price .................. $28,210

RETAIL PRICING

Like all Windmill products, the 400 Gallon 775 Spraymaster is the original Electrostatic/Dilute Combo sprayer. Never again will you have to choose between the tried and true spray methods and the future of electrostatic technology. Windmill Spraymasters come equiped with both - Standard.Consider the advantage of electrostatic. Advanced Electrostatic Spraying Technology has long been used by automobile and aircraft manufactures for painting. Windmill Spraymaster has perfected it's use in agriculture.

KEY FEATURESCorrosion Resistant Stainless Steel - 400 GallonCentrifugal – 10,000 cfm at 210 mphCentrifugal - High VolumeHeavy Duty – 90 h.p. Right AngleMultiport Jet With No-Clog ManifoldDeep Fill Stainless Basket with ShowerServiceable Canister StyleStainless Steel Throughout1 Rear Adjustable Rubber Mounted

Tank

FanPumpGearboxAgitationMixing

FilterPlumbingLights

Constant Velocity with Clutch – 540 rpmLow Pressure “O-GEE” Air Shear Clog FreeTee Jet “8008” Mounted In Stainless Steel Tubing (Optional)Electric or Manual Valves with Indicator Lights12.5Lx15 Tubeless60 psi, Liquid Filled, Stainless65 H.P. Required

PTO Shaft

Nozzles

High Volume

Controls

TiresPressure GaugeOutput

Rear Adjustable Lights

Model 1075 Electrostatic Sprayer

High Volume Dilute Kit ........................................... $2,8852” Fast Fill Kit Valve Option .................................... $486600 Gallon Stainless Steel Tank ............................. $1,678Under Row Option ................................................... $3,485

Tail Light Tow Option ............................................. $680Manual Controls Option ......................................... $150Non- Electrostatic Option .................................... -$1,200

OPTIONS

Model 1075 ........................................ Windmill Spraymaster ........................... List Price .................. $31,250

RETAIL PRICING

Like all Windmill products, the 500 Gallon 1075 Spraymaster is the original Electrostatic/Dilute Combo sprayer. Never again will you have to choose between the tried and true spray methods and the future of electrostatic technology. Windmill Spraymasters come equiped with both - Standard.Consider the advantage of electrostatic. Advanced Electrostatic Spraying Technology has long been used by automobile and aircraft manufactures for painting. Windmill Spraymaster has perfected it's use in agriculture.

KEY FEATURESCorrosion Resistant Stainless Steel - 500 GallonCentrifugal – 16,500 cfm at 210 mphCentrifugal - High VolumeHeavy Duty – 90 h.p. Right AngleMultiport Jet With No-Clog ManifoldDeep Fill Stainless Basket with ShowerServiceable Canister StyleStainless Steel Throughout1 Rear Adjustable Rubber Mounted

Tank

FanPumpGearboxAgitationMixing

FilterPlumbingLights

Constant Velocity with Clutch – 540 rpmLow Pressure “O-GEE” Air Shear Clog FreeTee Jet “8008” Mounted In Stainless Steel Tubing (Optional)Electric or Manual Valves with Indicator Lights14Lx16.1 Tubeless60 psi, Liquid Filled, Stainless80 H.P. Required

PTO Shaft

Nozzles

High Volume

Controls

TiresPressure GaugeOutput

2” Fast Fill Valve

Model 1275 Electrostatic Sprayer

Over Row Option .................................................... $3,485Tail Light Tow Option ............................................. $680

Non- Electrostatic Option .................................... -$1,200OPTIONS

Model 1275 ........................................ Windmill Spraymaster ........................... List Price .................. $35,850

RETAIL PRICING

Like all Windmill products, the 600 Gallon 1275 Spraymaster is the original Electrostatic/Dilute Combo sprayer. Never again will you have to choose between the tried and true spray methods and the future of electrostatic technology. Windmill Spraymasters come equiped with both - Standard.Consider the advantage of electrostatic. Advanced Electrostatic Spraying Technology has long been used by automobile and aircraft manufactures for painting. Windmill Spraymaster has perfected it's use in agriculture.

KEY FEATURESCorrosion Resistant Stainless Steel - 600 GallonCentrifugal – 16,500 cfm at 210 mphCentrifugal - High VolumeHeavy Duty – 90 h.p. Right AngleMultiport Jet With No-Clog ManifoldDeep Fill Stainless Basket with ShowerServiceable Canister StyleStainless Steel Throughout1 Rear Adjustable Rubber Mounted

Tank

FanPumpGearboxAgitationMixing

FilterPlumbingLights

Constant Velocity with Clutch – 540 rpmLow Pressure “O-GEE” Air Shear Clog FreeTee Jet “8008” Mounted In Stainless Steel TubingElectric or Manual Valves with Indicator Lights14Lx16.1 Tubeless60 psi, Liquid Filled, Stainless80 H.P. Required

PTO Shaft

Nozzles

High Volume

Controls

TiresPressure GaugeOutput

Air Flow Dampener

SHOWN WITH OPTIONAL FEATURES