Follow these easy steps to access the Virtual Laboratory practical

Step 1 Registration

Open the virtual lab website by entering web address https://portal.coepvlab.ac.in/vlab/

Click on register tab and fill the details

Select college nodal center code and name of the college as NC17 Vidyavardini’s College of Engineering and Technology, Palghar

After duly filling in the information, click on Register The password generated would be send to your register email id.

Step 2: Login/Sign in

Click on sign in and enter user name and password and click on sign in

Upon signing in, the following screen opens:

Step 3: Accessing the virtual laboratory experiments

Depending upon your interest, select branch of engineering. For example upon clicking Computer Engineering following window showing different labs will open:

Select the laboratory of your interest. For example : Upon selecting Computer Programming Lab(IIITH), the different experiments available under it will be seen:

Then select the experiment you wish to perform. For example: if the experiment on Arrays, the following window is seen

Go through the various tabs describing the Aim, Theory, and Procedure. GO to the Simulation tab and click the simulation you wish to run.

As per the steps described in the Procedure run the simulation and observe the results.

Step 4: Accessing the virtual laboratory experiments

Select Electrical engineering – Sensor modelling and simulation -Perform characterize temp sensor RTD and Thermocouple