Dynacord | DCS 416R

DCS 416R

www.dynacord.com

▪ 8 analog inputs

▪ 0–10 V DC or a potentiometer can be connected toeach input

▪ Pluggable connection terminals for referencevoltage of 10 V

▪ 8 analog outputs 0–10 V DC

The module is fitted on the back of the DCS 400 rackplug-in board. The module is used to connect analogcontrol cables and potentiometers whose level is usedto control loudspeaker controllers or other continuousparameters. The control outputs also provide analogvoltages to control external devices with analoginputs.Additional properties:

• Pluggable connection terminals with screwed flangefor all inputs and outputs

• A maximum of 2 DCS 416R modules can be cascaded

Parts included

No. Component

1 DCS 416R

2 Plug, 15-pin (Phoenix MC 1.5/15-STF-3.81 - 1827839)

Technical specifications

Operating voltage 24 V DC, -10%/+30%

Operating current (max.)

• Standby/Idle/Announcement/Alert

24 V, 72 mA, 1.73 W

Electromagnetical environment E1, E2, E3

Operating temperature -5 °C to 45 °C

Product dimensions (Width byHeight by Depth)

37.5 by 80.6 by 245 mm

Net weight 170 g

Inputs

• Voltage range (min.–max.)

0–10 V DC

• Impedance range ext.(min.–max.)

0–10 kΩ

• Maximum input voltage 50 V DC

Outputs

• Voltage range (min.–max.)

0–10 V DC

• Output impedance 47 Ω

• Maximum load 2 kΩ

Resolution of inputs/outputs 8 Bit

Reference voltage source

• Output voltage 10 V DC

• Maximum output current 30 mA

Input 10...10V

DATA ADC

CN

to B

ackp

lane

DC

DC

+24VCN

t +5VB+24VCN

EN ADC

-24VCN

B

A

CLK

DATA AD/DA

EN DAC

RES PCB SEL

DAT PCB SEL

EN PCB SEL

EN MONITOR

DC

DC

DC

DC

A

+18VA

+5VA

ADC

OU

TPU

T

C

N13

DATA ADC

+24VCN

EN ADC

-24VCN

CLK

DATA AD/DA

EN DAC

RES PCB SEL

DAT PCB SEL

EN PCB SEL

EN MONITOR

+24VCN

B

B+5VB

A+5VAB

DAC

A

+5VA +18VA

Input 80...10V

A

+5VA +18VA

A+5VA

A

Ident

A+5VA

Output 10...10V

A

+18VA

Output 80...10V

A

+18VA

DC

DC

A

+18VA

D Q

R

S

Q

D Q

R

S

Q

Boar

d se

lect

+24VA

Block diagram

2 | DCS 416R

Installation/configuration notes

Installation informationOn the DCS 400 rack plug-in board, slots 1–10 mustbe occupied in ascending sequence (left to right)without any gaps. Different module types canotherwise be arranged in any sequence.Exception: Slot 1 (far left) must always be occupiedwith a DCS 801R control module or DCS 405Rextension module.When assembling the device and installing theconnections, please comply with the standards VDE0100 and EN 60065.

ConnectorThe scope of delivery for the device includes two 15-pin connectors. Conductor cross-sections of 0.14 mm²(AWG26) to 1.5 mm² (AWG16) can be used.Recommended connecting cable: flexible CU strand,LiY, 0.75 mm².

Position of the bridges on the circuit board

Certifications and approvals

Status as of November 2012:

• EN 50130-4• EN 54-16• EN 55103-1• EN 55103-2

Ordering information

DCS 416ROrder number F.01U.121.790

3 | DCS 416R

Represented by:

Germany: EVI Audio GmbHSachsenring 6094315 StraubingGermany

www.dynacord.com

© Bosch Security Systems 2013 | Data subject to change without noticeDocument Number | Vs1 | 19. Mar 2013