2
Dynacord | DCS 412R DCS 412R www.dynacord.com 12 inputs The polarity for each input can be freely selected Each input is isolated by separating the wire jumpers Pluggable connection terminals for power supply to the buttons, contacts, and sensors The module is fitted on the back of the DCS 400 rack plug-in board. The module is used to connect control cables, buttons, switches, and sensors in order to check their status (on, off) in the PROMATRIX 8000 system. Additional properties: Pluggable connection terminals with screwed flange for all inputs A maximum of 5 DCS 412R modules can be cascaded Parts included No. Component 1 DCS 412R 2 Plug, 15-pin (Phoenix MC 1.5/15-STF-3.81 - 1827839) Technical specifications Operating voltage 24 V DC, -10%/+30% Operating current, all inputs open Standby/Idle/ Announcement/Alert 24 V, 83 mA, 2.00 W Electromagnetical environment E1, E2, E3 Operating temperature -5 °C to 45 °C Product dimensions (Width by Height by Depth) 37.5 by 80.6 by 245 mm Net weight 175 g Input level Input voltage for off (Low) U _IN < ±5 V Input voltage for on (High) U_ IN > ±10 V Input current at U _IN = 24 V I _IN = 4.8 mA Input voltage max. U_ IN max = ±31 V Output source 24 V Output current max. 90 mA

DCS 412R | DCS 412R

  • Upload
    others

  • View
    53

  • Download
    0

Embed Size (px)

Citation preview

Dynacord | DCS 412R

DCS 412R

www.dynacord.com

▪ 12 inputs

▪ The polarity for each input can be freely selected

▪ Each input is isolated by separating the wirejumpers

▪ Pluggable connection terminals for power supply tothe buttons, contacts, and sensors

The module is fitted on the back of the DCS 400 rackplug-in board. The module is used to connect controlcables, buttons, switches, and sensors in order tocheck their status (on, off) in the PROMATRIX 8000system.Additional properties:

• Pluggable connection terminals with screwed flangefor all inputs

• A maximum of 5 DCS 412R modules can be cascaded

Parts included

No. Component

1 DCS 412R

2 Plug, 15-pin (Phoenix MC 1.5/15-STF-3.81 - 1827839)

Technical specifications

Operating voltage 24 V DC, -10%/+30%

Operating current, all inputs open

• Standby/Idle/Announcement/Alert

24 V, 83 mA, 2.00 W

Electromagnetical environment E1, E2, E3

Operating temperature -5 °C to 45 °C

Product dimensions (Width byHeight by Depth)

37.5 by 80.6 by 245 mm

Net weight 175 g

Input level

• Input voltage for off (Low) U_IN < ±5 V

• Input voltage for on (High) U_IN > ±10 V

• Input current at U_IN = 24 V I_IN = 4.8 mA

• Input voltage max. U_IN max = ±31 V

Output source 24 V

• Output current max. 90 mA

P/S

ID

P/S

+24V

A1

B16Input 1

A2

B17Input 2

A3

B18Input 3

A4

B19Input 4

A5

B20Input 5

A6

B21Input 6

A7

B22Input 7

A8

B23Input 8

A9

B24Input 9

A10

B25Input 10

A11

B26Input 11

A12

B27Input 12

+24V

EN1

DATA1

CLK1

EN1_A

DATA_A

CLK1_A

DC

DCt+5V+24V

BR14

BR13

CN

to B

ackp

lane

GND

BR1

BR2

BR3

BR4

BR5

BR6

BR7

BR8

BR9

BR10

BR11

BR12

A13

B28GND

REF-OUT+24V

Block diagram

Installation/configuration notes

Installation informationOn the DCS 400 rack plug-in board, slots 1–10 mustbe occupied in ascending sequence (left to right)without any gaps. Different module types canotherwise be arranged in any sequence.Exception: Slot 1 (far left) must always be occupiedwith a DCS 801R control module or DCS 405Rextension module.When assembling the device and installing theconnections, please comply with the standards VDE0100 and EN 60065.

ConnectorThe scope of delivery for the device includes two 15-pin connectors. Conductor cross-sections of 0.14 mm²(AWG26) to 1.5 mm² (AWG16) can be used.Recommended connecting cable: flexible CU strand,LiY, 0.75 mm².

Position of the bridges on the circuit board

Certifications and approvals

Status as of November 2012:• EN 50130-4• EN 54-16• EN 55103-1• EN 55103-2

Ordering information

DCS 412ROrder number F.01U.121.788

2 | DCS 412R

Represented by:

Germany: EVI Audio GmbHSachsenring 6094315 StraubingGermany

www.dynacord.com

© Bosch Security Systems 2013 | Data subject to change without noticeDocument Number | Vs1 | 19. Mar 2013