DCN Next Generation Download and License Tool - starin.infostarin.info/Product Info/Bosch - Conferencing/Manuals/DCN Next... · Manual conventions For clarity this user manual uses

DCN Next Generation Download and License Tool

en User manual

Manual conventions For clarity this user manual uses consistent styles, symbols and typographical conventions. They are:

i Note

General notes are contained within rules and indicated with this symbol at the left margin. Notes are used to draw attention to special actions or information.

i Caution

A caution is contained within rules and indicated with this symbol at the left margin. Cautions are used to draw attention to actions or commands that could lead to a loss of information or damage to equipment

i Tip

A tip is contained within a box and indicated with this symbol at the left margin. Tips are used to provide supplementary information that may make an action quicker or easier to carry out.

• An action (to be carried out by the user) is shown with a larger round bullet mark.

Typographical conventions The following typographical conventions (text styles) are used in this manual: • Typed input - information to be typed in using

the keyboard is shown as: Filename

• Single key - input via a single key (or keys) on the keyboard is shown as:

<enter>, <shift>, etc. • Multiple keys - input via a combination of keys

pressed together is shown as: <ctrl>+<p>, <alt>+<f4>

• Screen text - information that appears on screen is shown as:

‘Choose Startup Modules:’ Hyperlinks This manual is also available as a digital document in the Adobe Portable Document Format (PDF). All references to pages, figures, tables, etc. in this digital document contain hyperlinks to the referenced location.

DCN Next Generation Download and License Tool en | 3

Bosch Communications Systems | 2007 February | IUIDLT_en.pdf

Table of contents 1 Install the Download and License Tool.......... 4 1.1 Introduction .............................................................. 4 1.2 Installing the software............................................ 4 1.2.1 The installation procedure .................................... 4 1.2.2 Installing the files .................................................... 5 1.3 Removing the Download and License Tool...... 7 2 Operating the Download and License Tool .8 2.1 Introduction .............................................................. 8 2.2 Setup the connection ............................................ 8 2.3 Download the CCU or NCO ............................... 8 2.4 Download Optical Devices .................................. 9 2.5 Downloading Concentus Font ..........................10 2.6 Enter License.........................................................11



1 Install the Download and License Tool

1.1 Introduction The Download and License Tool is used to download: • Software into the Central Control Unit • Software into device which are connected to the

optical network: Audio Expanders, Cobranet Interfaces and Integrus Transmitters.

• Fonts into the Concentus delegate and chairman units which graphical displays

• Download the license key into the Central Control Unit

This user manual explains how to install and use the Download and License Tool.

i Note

Please read the Installation and User Instruction before using this Download and License Tool.

i Note

Before installing the software, it is advisable to make back-up copies and store them in a safe location.

1.2 Installing the software The software can be used on Windows XP Professional.

i Note

If you wish to make the software available to all users, you must first logon as an administrator before beginning the installation.

The CD-ROM will start automatically, if the CD-ROM doesn’t start automatically:

• Click on the ‘Start’ button and select the ‘Run...’

A dialogue box will appear containing a text field:

Figure 1 Run Dialog Box

• Type <drive>:\setup.exe and click on the ‘OK’ button. Where <drive> is the CD-ROM drive.

Internet explorer is started and a webpage is shown.

i Note

The webpage is optimized for Microsoft Internet Explorer.

• Select ‘Install software’ to go to the Install software page.

• Click the bullet after ‘Start Download and License Tool Installation’.

i Note

It may happen that a security warning is shown. In this case select ‘Run’ to start the installation.

1.2.1 The installation procedure The InstallShield Wizard starts and prepares for installing:

Figure 2 InstallShield Wizard



The InstallShield stops if any of the following issues are not fulfilled: • Windows 2000 or Windows XP • Pentium III or higher • Hard Disk present • At least 30 MB free space at the Hard Disk The preparation will take some time. When it is complete, a window will appear:

Figure 3 DCN Next Generation Download and License Tool Setup Program

• Click the ‘Next’ button

The license Agreement window appears:

Figure 4 License Agreement

Please read the license agreement carefully.

• Click the ‘Print’ button to print to license text

• Click the ‘Yes’ button to accept the agreement

• Click the ‘Back’ button to go back to the DCN Next Generation Download and License Tool Setup window

If the ‘Cancel’ button (or the ‘No’ button in the license agreement window) is pressed during the

installation process, the installation will be cancelled and the following window appears:

Figure 5 Installation cancelled

• Click the ‘Yes’ button to quit the setup

• Click the ‘No’ button to continue

If the ‘Yes’ button is pressed the following window is displayed:

Figure 6 InstallShield Wizard Complete

1.2.2 Installing the files InstallShield displays the destination folder for the program files on the Hard Drive where the Download and License Tool will be installed:

Figure 7 Choose Destination Folder

• To change the folder click the ‘Browse’ button

• Click the ‘Next’ button to keep the folder



If the ‘Browse’ button is pressed the following window appears:

Figure 8 Choose folder

• Select or key in your new folder and click the ‘OK’ button.

• Click the ‘Cancel’ button to keep the pre-selected folder.

The InstallShield prompts an error if any of the following issues are not fulfilled: • The folder entered is not valid (or read only). • The drive specified is not a Hard Disk • The drive specified must have at least 30 MB

free space. The following window is displayed:

Figure 9 Setup Status

After the installation of the Download and License Tool Program the DCN Download Files must be installed. The following window appears:

Figure 10 DCN Download Files Setup Program

The license Agreement window appears:

Figure 11 License Agreement

Please read the license agreement carefully.

• Click the ‘Print’ button to print to license text

• Click the ‘Yes’ button to accept the agreement

• Click the ‘Back’ button to go back to the DCN Next Generation Download and License Tool Setup window

If the ‘Cancel’ button (or the ‘No’ button in the license agreement window) is pressed during the installation process, the installation will be cancelled and the following window appears:

Figure 12 Installation cancelled



• Click the ‘Yes’ button to quit the setup

• Click the ‘No’ button to continue

When the DCN Download Files Setup Program is finished the following window appears:

Figure 13 DCN Download Files setup complete

• Click the ‘Finish’ button.

After a while the following window appears and the setup is complete:

Figure 14 DCN Download and License Tool setup complete

1.3 Removing the Download and License Tool

The Download and License Tool can be removed by using the standard Microsoft ‘Add/Remove Programs’.

Figure 15 'Add/Remove Programs'

• Select ‘DCN Download and License Tool’ and click ‘Change/Remove’

The following windows appears:

Figure 16 Remove confirmation

• Click the ‘OK’ button to remove the tool

• Click the ‘Cancel’ button to cancel the removal process

When InstallShield is finished removing the following window appears:

Figure 17 Uninstall Complete

i Note

The DCN Download Files can be removed in the same way.



2 Operating the Download and License Tool

2.1 Introduction The DCN Download and License Tool is a Microsoft .Net based application. It contains a menu and an icon bar in which the functions can be selected.

2.2 Setup the connection First the connection with the CCU must be configured.

• Select ‘Tools, Options’ from the menu bar or click the ‘Options’ button as shown in the picture below.

Figure 18 Options button

The following window appears:

Figure 19 Connection options

• Select the connection where the CCU or the NCO is connected.

• In case of a CCU, select the ‘Serial Port’ of your PC where the CCU is connected to and select the correct ‘Baud Rate’.

• In case of a NCO fill out the IP address of the NCO.

• Click ‘OK’ to accept the settings

• Click ‘Cancel’ to discard the changes and keep the previous settings

2.3 Download the CCU or NCO To download software into the CCU or NCO:

• For CCU Select ‘Tools, Download CCU, Wireless/Wired’ , for NCO select Tools, Download NCO’ from the menu bar or click the required button as shown in the picture below.

Figure 20 Download CCU for wired DCN button

In case of Wired CCU and NCO the following image is shown:

Figure 21 Unit languages selection

• Select the required languages and click ‘OK’

• Click ‘Cancel’ to stop the CCU download



i Note

The English unit language is always selected and cannot be deselected. Due to memory size of some fonts, the following languages cannot be combined: Japanese, Czech, Russian, Chinese (simplified), Chinese (traditional), Lithuanian, Slovenian, Polish, Slovak, Romanian.

The download of the CCU starts with step 1 of 2 and the following images shows the progress.

Figure 22 Downloading CCU step 1

When the download finishes step 1 the system resets itself and continues with step 2.

i Note

During the reset after step 1 and after step 2 it may happen that al small tick is heard in the system.

When the download is finished to the following windows appears:

Figure 23 End of Download

2.4 Download Optical Devices To download the optical devices connected to the CCU:

• Select ‘Tools, Download Optical Devices’ from the menu bar or click the ‘Download Optical Devices’ button as shown in the following picture.

Figure 24 Download Optical Devices

i Note

Disconnect all CCU’s when downloading optical devices from the NCO.

The Download and License Tool prepares the download by browsing the network for downloadable optical devices. If no download device are found the following windows is shown:

Figure 25 No Optical units for downloading

• Click ‘OK’ to finish.

When there are downloadable optical devices the following window shows the progress.

Figure 26 Download optical devices progress

All downloadable optical devices are sequentially downloaded. For reference purpose the serial number of the optical device is shown during the download.



When the download is finished the following windows appears:

Figure 27 End of download

• Click ‘OK’ to finish.

2.5 Downloading Concentus Font If a non Latin character/font language was selected during the download of the CCU, the fonts must be downloaded to the Concentus units. The following languages have non Latin fonts: • Japanese • Czech • Russian • Chinese (simplified) • Chinese (traditional) • Lithuanian • Slovenian • Polish • Slovak • Romanian. The Download and License Tool uses the default system as the font which is downloaded to the Concentus units. To change the system font:

• Select ‘Start, Control Panel, Regional and Languages Options’ and click the tab ‘Advanced’.

Figure 28 Regional and Languages Options

• Select the language which matches the language selected during the download of the CCU under ‘Language for non Unicode programs’.

• Click ‘OK’ to activate the changes.

To download fonts to the Concentus units:

i Caution

The CCU with the required unit language must be downloaded before the Concentus fonts are downloaded.

• Select ‘Tools, Download Concentus Fonts’ from the menu bar or click the ‘Download Concentus Fonts’ button as shown in the following picture.

Figure 29 Download Concentus Fonts



In step 1 the fonts are generated and in step 2 the fonts are downloaded to the Concentus units.

When the download is finished to the following windows appears:

Figure 30 End of Download

i Caution

The CCU must be downloaded with the required unit language before the Concentus fonts are downloaded.

2.6 Enter License The ‘Enter License’ function is to license the CCU for use in combination with PC control and Open Interface. The license can be purchased at your local dealer.

• Select ‘Tools, Enter License’ from the menu bar or click the ‘Enter License’ button as shown in the following picture.

Figure 31 Enter License

The following progress indicator appears:

Figure 32 Enter License window

• Click ‘Cancel’ to terminate ‘Enter License’.

• Enter the license for your system and click ‘OK”

If the license is not correct for your system the following message appears:

Figure 33 Incorrect license

• Click ‘OK” and correct your license key.

If the correct license has been entered the following message appears:

Figure 34 License installed

For more information please visit www.boschsecurity.com

© 2007 Bosch Security Systems B.V. Data subject to change without notice 2007 February

http://www.boschsecurity.com/

Documents

DCN Next Generation Download and License Tool - starin.infostarin.info/Product Info/Bosch - Conferencing/Manuals/DCN Next... · Manual conventions For clarity this user manual uses