rfi.com.auCopyright RF Industries Pty Ltd 2018. Subject to change without notice.

Asia Pacific | EMEA | Americas

POWER · CONNECTIVITY · SIMPLICITYDC SPLICE

The Digital Drift DC Splice is installed immediately after a DC power supply to:

• Adapt regular DC power cable to the coaxial cable format;

• Protect the power supply from short circuits on the coaxial cable;

• Protect the coaxial cable and communications devices from reverse voltage beingapplied to the system.

P-43157-1

Specifications

SIZE AND WEIGHT

Height 80mm

Width 160mm / 220mm (housing / incl. glands)

Depth 80mm

Weight 1.0kg

ENVIRONMENTAL

Operating Temp -40 to 60°C

Operating Humidity 5% to 95% (Non-condensing)

Ingress Protection IP66 (Dust tight and protection against powerful water jets)

PROTECTION

Over Current Integrated magnetic circuit breaker

Reverse Voltage Internal 10A diode

ORDERING CODES

DD210-DC-SPL-5 Protected DC Splice, 5A breaker

DD210-DC-SPL-10 Protected DC Splice, 10A breaker

IN THE BOX

DC Splice Digital Drift DC Splice

POWER

Voltage Capability Up to 90V DC