DB09 INCUBATOR€¦ · DB09 The DB09 is a bench top incubator designed to fit on 24” benchtops or stacked with optional racking. DB030 The DB030 is a single-door incubator. DB034

2945 Washington Ave. St. Louis, MO 63103

877-783-6774 | [email protected]

www.darwinchambers.com

DB09 INCUBATOR

DB Series OverviewThe DB series incubators are popular among researchers, used for a variety of applications. The DB series laboratoty incubators include heating and cooling capabilities. These units have lower temperature specifications than our thermoelectrically cooled units, have associated greater heat removal capabilities, and are ideal for locations where the ambient conditions cannot be controlled very well.

DB09 The DB09 is a bench top incubator designed to fit on 24” benchtops or stacked with optional racking.

DB030 The DB030 is a single-door incubator.

DB034 The DB034 is a single-door incubator providing extra cubic feet designed for maximum capacity while still allowing passage through most commercial doorways.

DB055The DB055 is a 2-door incubator.

DB084The DB084 is a 3-door incubator.

Featured photo is the DB09 bench top incubator, shown with upgraded west controller, open door view to show adjustable internal racks.

Featured photo is the DB09 benchtop incubator, open door view.




DB SERIES: INCUBATORThe DB series incubators all include heating capabilities and cooling capabilities.These units excel as general all-round incubators. They have lower temperature specifications than our thermoelectrically cooled units and have associated greater heat removal capabilities. These units are ideal for locations where the ambient conditions cannot be controlled very well or there is a live heat load - such as for HPLC, shakers, or other laboratory equipment. These units will also outperform our thermoelectric units where specifications call for fast “open door” recovery times.

Typical optional accessories are Watlow controllers, Honeywell or Partlow chart recorders, 485 communications for PC control, temperature and humidity data logging monitors, full glass doors, full stainless steel interior and exterior, and more shelves.

As always, if you have different dimensions, specifications, probes, microprocessors etc., we can accommodate your needs.

PerformanceDarwin Chambers DB09 model comes standard with a temperature range of 2° C to 60° C with a temperature control of ± 2° C and temperature uniformity of ± 7° C.

Control SystemAll DB series models comes standard with a Fuji PXG4 (PID - Fuzzy Logic) controller providing a readout of actual and set-point values. This chamber comes with audible and visual alarms, remote monitoring and a numeric password protection. Plenty of alternative customized options are available.

ConstructionDarwin Chambers DB09 model comes with a powder-coated exterior, stinless steel interior, and 2 stainless steel shelves. All chambers come with a 2” access port. See chart on next page for exact dimensions.

OptionsAll DB series offer endless customized options. Common upgrades include stainless steel shelving, interior/exterior, various lighting options including LED, fluorescent, dimming options and microprocessor control of lights, upgraded controllers (West EC-44, Future Design Touchpad, Watlow, Allen Bradley, etc.), and more.

Services and Warranties Darwin Chambers Company offers 24 hour technical support throughout the lifetime of your chamber. In addition to standard warranties, we also offer extended warranties for cooling components, parts and labor. We also provide qualifications, validations and preventive maintenance services at an additional cost. Please ask for a quote.




ConstructionExteriorInterior

Powder Coated

Stainless Steel2 stainless steel Adjustable 1” Increments

Leg Levelers

Available

AvailableAvailable

Rack for stackable optionShelvingCasters

Standard Customized Option

PerformanceTemperature Range 2º C to 60º C Available

Ambient Temperature 21º C ± 3º C Available

Temperature Control

Control ResolutionTemperature Uniformity

Temperature Sensor

± 2º C

0.1º C

± 0.7º C

NIST Traceable Platinum RTD

Available

Available

Available

Available


Capacity & DimensionsInterior CapacityExternal Dimensions

9 ft3

34.5” W x 28.25” D x 44” H

29.75” W x 22.5” D x 29.75” H

21.5” W x 26.25” D

340 lbs

255 liters 87.63 cm W x 71.75 cm D x 111.76 cm H

75.57 cm W x 57.17 cm D x 75.57 cm H

54.61 cm W x 66.68 cm D

154 kgShelf DimensionsInternal Dimensions

Crated Weight

US Standard Metric

Control SystemController Fuji PXG4 (PID - Fuzzy Logic) West EC-44, Future Design Touchpad, Watlow, Allen Bradley

Trending, Duty Cycle

Available

Available

Text, Email, Web Server, Remote AccessAbsolute 0.1 Resolution with Delay

EthernetNumeric, Alpha Numeric

Remote Monitoring Password ProtectionAudit TrailUninterrupted Power Supply (Monitoring)

Control Readout

Dry Alarm Contact, RS 485 & Analog OutputNumeric

N/AN/A

Actual and Set-Point Values

Available

Available

Calibration Corrrection Capability

AlarmUniformity Off Set

Alarm Type

Standard 0.1 Resolution

Audible and Visual Standard 0.1 Resolution

Deviation in 0.1º C or 0.1% RH with Delay


DB09 Incubator Specifications (ambient 21° C)

ElectricalVoltage 115 / 60 / 1 230 / 50 / 1

RLA 5 2.6 With Step Down Transformer

Cord Length 9 ft 9 ft

US Standard International




DB09 Incubator Technical Drawings

27.50"69.85 cm

87.63 cm

34.5"

71.75 cm

28.25"

29.75"75.57 cm

29.75"75.57 cm

24.70"62.74 cm

87.63 cm

34.5"

25.40 cm

10"

86.36 cm

34"

29.75"75.57 cm

22.50"57.15 cm

24.70"62.74 cm

111.76 cm

44"

25.40 cm

10"

86.36 cm

34"

Top View

Front ViewSide View

Isometric View

Documents

DB09 INCUBATOR€¦ · DB09 The DB09 is a bench top incubator designed to fit on 24” benchtops or stacked with optional racking. DB030 The DB030 is a single-door incubator. DB034