2
CONTACT DETAILS: Organized by: NED UNIVERSITY OF ENGINEERING & TECHNOLOGY (NEDUET) ASIAN INSTITUTE OF TECHNOLOGY (AIT) AIT SOLUTIONS (AITS) Ms. Rakdao Pakdisi E-mail : [email protected] Tel : Department of Civil Engineering NED University of Engineering and Technology (NEDUET), Karachi, Pakistan +662 524 6388 PERFORMANCE-BASED STRUCTURAL DESIGN OF TALL BUILDINGS 20-21 April 2018 | NED Karachi Making Buildings Safer for Pakistan Certified CPD by Pakistan Engineering Council Time Topic Speaker 08:30-09:00 Registration 09:00-09:15 Opening/Welcome Remarks 09:15-10:15 Dynamic Response of Tall Buildings Dr. Naveed Anwar (AIT Solutions) 10:15-11:15 Important Considerations in Performance-based Design of Structural Components (Shear walls and coupling beams) & (Diaphragms and Foundations) Engr. Thaung Htut Aung (AIT Solutions) 11:15:12:30 Important Considerations in Performance-based Design of Structural Components (Frame-infill interaction) Dr. Aslam F. Muhammad (NED University) 12:30-13:30 Lunch and Namaz Break 13:30-14:30 Hands-on Workshop Session 1: Performance-based Seismic Design using ETABS 2016 (Part 2) Engr. Thaung Htut Aung (AIT Solutions) Dr. Fawad Ahmed Najam (AIT Solutions/ NUST) 14:30-16:00 Hands-on Workshop Session 2: Interpretation of Results from Nonlinear Time History Analysis (NLTHA) Procedure Engr. Thaung Htut Aung (AIT Solutions) 16:00-16:30 Closing Remarks by Chief Guest and Distribution of Certificates Day 2: 21 April 2018 (Hands-on Training on Software Tools/Workshop) The NED University of Engineering & Technology (NEDUET) was established in March 1977 under an act of the Provincial Assembly of Sindh (Pakistan), after upgrading of the former NED Government Engineering College, which was set up in 1922. The NED University is thus one of the oldest institutions in Pakistan for teaching and producing Engineering graduates. Established in Bangkok in 1959, the Asian Institute of Technology (AIT) is a leading regional postgraduate institution and is actively working with public and private sector partners throughout the region and with some of the top global academic institutes. AIT Solutions (AITS) focuses on establishing higher scientific, engineering, and technological standards; developing innovative solutions; and collaborating with public and private organizations by providing integrated solutions based on AIT’s research, knowledge, and expertise. Dr. Muhammad Usman AIT Solutions Asian Institute of Technology Thailand

Day 2: 21 April 2018 NED UNIVERSITY OF …solutions.ait.ac.th/wp-content/uploads/2018/04/Brochure...Seismic Analysis and Modeling of Structures (with hands-on training) • Gain experience

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Day 2: 21 April 2018 NED UNIVERSITY OF …solutions.ait.ac.th/wp-content/uploads/2018/04/Brochure...Seismic Analysis and Modeling of Structures (with hands-on training) • Gain experience

CONTACT DETAILS:Organized by:

NED UNIVERSITY OF ENGINEERING &

TECHNOLOGY (NEDUET)

ASIAN INSTITUTE OF TECHNOLOGY (AIT)

AIT SOLUTIONS (AITS)

Ms. Rakdao Pakdisi E-mail : [email protected] Tel :

Department of Civil Engineering NED University of Engineering and Technology (NEDUET), Karachi, Pakistan

+662 524 6388

PERFORMANCE-BASED STRUCTURAL DESIGN OF TALL BUILDINGS20-21 April 2018 | NED Karachi

Making Buildings Safer for Pakistan

C e r t i f i e d C P D b y P a k i s ta n E n g i n e e r i n g C o u n c i l

Certified CPD by Pakistan Engineering

Council

Time Topic Speaker

08:30-09:00 Registration

09:00-09:15 Opening/Welcome Remarks

09:15-10:15 Dynamic Response of Tall

Buildings

Dr. Naveed

Anwar

(AIT Solutions)

10:15-11:15 Important Considerations in

Performance-based Design of

Structural Components (Shear

walls and coupling beams) &

(Diaphragms and Foundations)

Engr. Thaung

Htut Aung

(AIT Solutions)

11:15:12:30 Important Considerations in

Performance-based Design

of Structural Components

(Frame-infill interaction)

Dr. Aslam F.

Muhammad

(NED University)

12:30-13:30 Lunch and Namaz Break

13:30-14:30 Hands-on Workshop Session 1:

Performance-based Seismic

Design using ETABS 2016

(Part 2)

Engr. Thaung

Htut Aung

(AIT Solutions)

Dr. Fawad

Ahmed Najam

(AIT Solutions/

NUST)

14:30-16:00 Hands-on Workshop Session 2:

Interpretation of Results from

Nonlinear Time History Analysis

(NLTHA) Procedure

Engr. Thaung

Htut Aung

(AIT Solutions)

16:00-16:30 Closing Remarks by Chief Guest and Distribution

of Certificates

Day 2: 21 April 2018 (Hands-on Training on Software Tools/Workshop)

The NED University of Engineering & Technology (NEDUET) was established in March 1977 under an act of the Provincial Assembly of Sindh (Pakistan), after upgrading of the former NED Government Engineering College, which was set up in 1922. The NED University is thus one of the oldest institutions in Pakistan for teaching and producing Engineering graduates.

Established in Bangkok in 1959, the Asian Institute of Technology (AIT) is a leading regional postgraduate institution and is actively working with public and private sector partners throughout the region and with some of the top global academic institutes.

AIT Solutions (AITS) focuses on establishing higher scientific, engineering, and technological standards; developing innovative solutions; and collaborating with public and private organizations by providing integrated solutions based on AIT’s research, knowledge, and expertise.

Dr. Muhammad Usman

AIT Solutions Asian Institute of TechnologyThailand

Page 2: Day 2: 21 April 2018 NED UNIVERSITY OF …solutions.ait.ac.th/wp-content/uploads/2018/04/Brochure...Seismic Analysis and Modeling of Structures (with hands-on training) • Gain experience

BACKGROUND

EVENT FORMAT

With recent advances in computing and modeling tools, and with growing challenges in terms of increase in population, urbanization, complexities in structural forms and innovative systems, the practicing structural engineers and designers nowadays need to equip themselves with various advanced skills. The demand and complexity is rapidly increasing for built environment including accommodation, offices, and commercial areas to accommodate rapidly growing urban population. Resultantly, the cities and infrastructure of future will need to be denser, complex and taller.

These challenges require great expertise and computational capabilities in terms of using state-of-the-art nonlinear analysis procedures, latest computer modeling software and developing insight into the complex dynamic behavior of structures.

Various themes and topics include the following.

On the first day of event, experts will discuss latest structural design philosophies and performance-based design procedure, and will provide an account of recent developments and trends in the modeling, analysis and performance evaluation of high-rise buildings with emphasis on various issues, challenges and opportunities related to Pakistan. Based on practical experience obtained from the detailed structural analysis and design of a large number of high-rise buildings, experts will also share some important insights into the nonlinear and dynamic behavior of buildings and will provide useful recommendations for an effective design and enhanced structural performance against wind and earthquake loads.

The second day will focus on hands-on training sessions for various software and computational tools required to carry out performance-based design. Apart from practical demonstration to conduct various analysis procedures, emphasis will also be given to the interpretation of analysis results.

THEMES TENTATIVE SCHEDULE

REGISTRATION FEES

WHY ATTEND?

WHO SHOULD ATTEND?

New Developments in the Structural Design of Buildings

Performance-based Design of High-rise Buildings

Seismic Analysis and Modeling of Structures (with hands-on training)

• Gain experience and interact with international experts working in the field of performance-based design of high-rise buildings, participate in discussions, idea exchange, and meet colleagues

• Hands-on training and demonstration of state-of-the-art analysis software and computational tools

• Learn from several real case studies presented by experts, opportunity to find solutions of practical issues and challenges related to implementation of PBD by common design offices

• Certified CPD activity by Pakistan Engineering Council (PEC)

• Structural designers, practicing engineers and consultants

• Academicians and researchers

• CEOs and managers in building industry

• Architects, planners

• Real-estate developers and owners

• Officials from public departments

• Master’s and Ph.D. students

Professionals Students

Seminar 3000 PKR 2000 PKR

Workshop 2000 PKR Free

Time Topic Speaker

08:30-09:00 Registration

09:00-09:30 Opening Ceremony

09:30-10:30

Progression of Structural Design Approaches-From Working Strength to Resilience

Dr. Naveed Anwar (AIT Solutions)

10:30-11:30Performance based design and assessment of RC Structures in Pakistan

Dr. AJ Sangi(NED University)

11:30:12:30Performance-based Design, Value Engineering and Peer Review

Dr. Naveed Anwar (AIT Solutions)

12:30-13:30 Lunch and Namaz Break

13:30-14:30Interaction of ground motion characteristics with nonlinear response

Dr. Mukesh Kumar(NED University)

14:30-15:30Procedure for Performance-based Design

Engr. Thaung Htut Aung (AIT Solutions)

15:30-16:30The Scope of PBD in Pakistan - Are we prepared enough to handle the next “Big One”?

Dr. Fawad Ahmed Najam (AIT Solutions/NUST)

16:30-17:00

Panel Discussion and ForumModerator: Dr. Fawad Ahmed NajamPanelists: Dr. Naveed Anwar, Engr. Thaung Htut Aung, Experts form NED, Professionals from Industry

17:00-17:15 Closing Remarks

Day 1: 20 April 2018 (Seminar)

Progression of structural design approaches, structural engineering solutions to architectural challenges, analysis and design of innovative structures, Dynamic response and importance of ductility.

Process of perfor-mance-based design, value engineering, peer review, PBD case studies. International standards and guide-lines for PBD, current design practice in Pakistan, need for new codes and improve-ment in existing codes

Advanced analysis and modeling techniques, important considerations in design of primary structural components, nonlinear modeling and analysis in ETABS, interpretation of dynamic analysis results.