DAWCUL PARTNER PROFILE

PETROChEmICAL ExPERTIsE & sUPPLy sINCE 1977

KIDDE GX20 FM-200® FIRE SUPPRESSION SYSTEM

• Fast and effective against a wide range of Class A, ClassBandelectricalfires

• Safe for occupied areas

• Non-corrosive and electrically non-conductive

• No post-discharge residue, no clean-up required

• Environmentally acceptable

• Fully engineered systems

• Range of system release options

• Computer design maximizes effectiveness of system

• FM Global, UL and LPCB approved

Kidde GX20 FM-200® has been adopted by the majority oftheworld`sfireprotectioncompanies and is the most widelyusedcleanagentfiresuppressant, with tens of thousands of systems installed across the globe.

FM-200 is a colourless, odourless gas. It is stored as a liquid and super-pressurised to 25 bar with nitrogen. FM-200 offers excellent space/weight advantages allowing maximum usage of the area for its intended function. Highlypenetrative,itactsonfireslargelybyphysicalmeans,loweringthetemperatureoftheflametothepointat which combustion reactions cannot be sustained.

Flexibility, quality and reliability make the Kidde GX20 rangetheworld`sfinestinfiresafetyandtheequipmentcarries third party listing through FM Global and the Loss PreventionCertificationBoardUL2166complianceandLloyds Registry of Shipping.

Awiderangeofcylindersizesfrom5to368litresisavailable,offeringachoiceoffillcapabilitiestomeetspecificrequirementsandensuremaximumeconomyin installation. Each cylinder is manufactured from high strength alloy steel and both TPED and DOT approved cylinders are available.

Valves are manufactured from tough, corrosion-resistant brass under stringent quality control standards. A pressure monitoring gauge and optional supervisory pressure switches are provided for easy servicing. Valves can be actuated by electric solenoid, pneumatic pressure, or local manual release at the control head.

Custom-designed nozzles are available with normal pipe sizesfrom½”to2”,including180°and360°configuration.

Anempirically-verifiedcomputerprogramisusedtomodeltwo-phaseagentflowandensurethatthecorrectconcentrationofagentisachievedwithin10secondsthroughout the protected zones.

Foundedin1917KiddeFireProtectioniscelebratingacenturyofprotectingpeople,propertyandprocessesfromtheeffectsoffire.

Kidde Fire Protection is part of UTC Climate Controls and Security, a division of United Technologies Corporation, one of the world’slargestgroupsoffireprotectioncompanies.KiddeFireProtectionhasaccreditationtoBSENISO9001:2008QualityManagementSystemandallcomponentsarerigorouslyinspectedtoensureconsistentreliabilityandfireperformance

For additional information feel free to contact us or visit:www.dawcul.com

DawculHeadOffice Number8BeechCourt,WokinghamRoad Hurst,Reading,BerkshireRG100RQ United Kingdom

T: +44(0)1189320520 F: +44(0)1189241919 E: sales@dawcul.co.uk W:www.dawcul.com

KIDDE 3M™ NOVEC™ 1230 FIRE SUPPRESSION SYSTEMByfarthelargestsafetymarginfortotalfloodinginoccupied spaces of any clean agent currently available.

• Zero Ozone Depletion Potential• LowGlobalWarmingPotential• AtmosphericLifetimeofonlyfivedays• Colourless, electrically non-conductive and non-corrosive• Fastfirefightingbyreachingextinguishing concentrations in less than ten seconds

TheKidde3M™Novec™1230firesuppressionsystemisthenextgenerationingaseousfiresuppressiontechnology. Designed to protect human life and high valueassetsfromthefire,itmeetsindustryconcernsforsafety, performance and the environment.

Novec1230fluid(FK-5-1-12)isafluorinatedketonethatisstored as a liquid and discharged as a gas. It distributes uniformlythroughoutthehazardzone,andsuppressesfireprimarilybyheatabsorptionfromtheflame.

Withazeroozonedepletionpotential(ODP),aglobalwarmingpotential(GWP)ofjustone,andanatmosphericlifetime(ALT)ofonlyfivedays,Novec1230fluidoffersanenvironmentallyresponsibleoptionforfiresuppression.Novec1230doesnotfallundertheEuropeanF-GasRegulation. At the end of the lifetime of the system, the fluidcanbereadilyrecoveredandrecycled.

Novec1230fluiddischargesasacolourless,electricallynon-conductive and non-corrosive gas that does not damage sensitive equipment. There is no post-discharge residue, no costly clean-up operations are required and down-time is kept to a minimum.

By using its tried and trusted range of 25 bar equipment, Kidde Fire Protection can offer a cost-effective Novec 1230firesuppressionsystem.

Novec1230fluidreachesextinguishingconcentrationsin less than ten seconds, while being effective on a wide rangeofClassA,ClassBandelectricalfires.

TheUSEPASignificantNewAlternativesProgram(SNAP)classifiesNovec1230fluidasacceptableforuseasatotalfloodingagentinoccupiedspaces.Ithasbyfarthelargestsafety margin of any clean agent currently available.

Novec1230fluidisstoredasaliquidsuper-pressurisedto25 bar with nitrogen. These systems have minimal storage space and weight requirements compared to other viable gaseous agents.

Awiderangeofcylindersizesfrom5to368litresisavailable. Each cylinder is manufactured from high strength alloy steel and both TPED and DOT are available.

KIDDE RANGE OF INERT GASES ARGONITE (IG55) • NITROGEN (IG100 • ARGON (IG01) • IG541The extinguishing method of Inert Gas Suppression Systems is to reduce the normal atmospheric oxygen level of20.9%downtoalevelwherecombustioncannolongerbesustainedwhichformostcommonfiresisbelow15%.

The Kidde Inert Gas range does not emit any toxic decomposition products, does not contain any ozone depleting substances.

The Inert Gas range is approved as a `Total Flood` system. This requires the enclosure to be adequately sealed toachieveandhold,atdesignconcentration,thefiresuppressionagentforatleast10minutesafterthefirstfirehas been suppressed/extinguished. This is to ensure no re-ignitionbeforefirefightersareinattendance.

The Kidde Inert Gas Range of Fire Suppression Systems includesourgloballyrecognizedArgonite™(IG55–50%Nitrogen/50%Argon);theotheragentsare

• IG01(100%Argon)• IG100(100%Nitrogen)• IG541(52%Nitrogen,40%Argon&8%Co2)

All of the Kidde Inert Gas Range of Fire Suppression Systems are approved for use within normally occupied areasusingconcentrationsuptotheNOAEL(NoObservedAdverseEffectsLevel)43%withNOrestrictions,other than to provide a time delay device to allow personnel to evacuate prior to agent discharge.

All manufacturers/designers are required by BS EN 15004-1toensurethatpersonnelarenotsubjectedto`unnecessary` exposure in order to satisfy this requirement, safety devices such as a time delay and automatic/manual switch are used as standard where concentrations above theNOAELanduptotheLOAEL(LowestObservableAdverseEffectLevel)areachieved.ThesearenormalconcentrationsusedforextinguishingmostfiresofaClassA or Class B nature, where agent concentrations required arebetween43%and52%.