DATASHEET PART 18050

© MoTeC Published 28 June 2016 11

C127- RACE LOGGING KIT

The C127 Race Logging Kit is a cost-effective, full • Supports Wideband Lambda from MoTeC PLMs or LTCscolour, plug and play solution that offers professional • Easily integrates with MoTeC CAN based products such aslevel features without the hassle of a customised GPS, shift lights, ECUs and expanders. Full I/O expansion isinstallation. It provides a complete, race-ready display available with use of E888 and E816 expanders.and logging system that can be adapted and expanded

• GPS Lap Timingto suit various applications.

• Supports T2 Telemetry (optional)The C127 in this kit comes with 120 MB internallogging which can be upgraded to USB Logging at any • Composite video inputs allows for live on-screen footage, fortime. The display can be fully customised using the example from a rear view camera (requires Display Creator).optional Display Creator software, and canincorporate live video from an on-board camera input.

KIT CONTENTS

FEATURES 18048 – C127 - COLOUR DISPLAY LOGGER

29818 – C127 120MB LOGGING• High resolution colour LCD Display Logger with 120 MBinternal memory and i2 Standard software (i2 Pro Analysis 61260 – C125 ACCESSORY KIT containing:optional)

• 41304 – GPS L10 10Hz• Controller (with C127 I/O Upgrade – optional)

• 61221 – TWO BUTTON LOOM• Display size 178 mm (7")

• 61225 – NETWORK CABLE RJ45 1.5 METRE• High brightness for sunlight readability

• 62204 – C125 RACE LOOM TERMINATED• Displayed channels, labels and colours are configurable on 10

supplied layouts and 16 colour schemesOPTIONAL UPGRADES

• 48 user-defined, scrollable message lines with programmableoverrides • 29800: C127 I/O

• 3 programmable modes with customisable labels, e.g. • 29814: C127 USB LOGGINGPractice, Warm-Up and Race

• 29816: C127 DISPLAY CREATOR• 16 full colour (RGB) LEDs; colour, function and intensity are

• 29820: C127 PRO ANALYSISfully programmable• 29823: C127 T2 TELEMETRY• Suitable for cars, marine and industrial applications

Check for latest version at www.motec.com

DATASHEET PART 18050

© MoTeC Published 28 June 2016 22

ACCESSORIES & ADDITIONAL LOOMS CONNECTING THE C127 RACE LOGGING KIT

• 61279: CABLE - USB A PANEL TO MINI B The C127 Race Logging Kit has a professional level terminatedloom that is pre-configured to get the most out of your C127. This(This cable is required for USB Logging)loom plugs into the back of the C127, and has labelled wires for

• 61280: MOTEC 32 GB DATA PLUG each of the devices that come with the kit.• 61292: 32 GB USB3 FLASH DRIVE Follow these guidelines to connect the loom:

Power61197 – OBD-II TO DISPLAY LOOMPlug the power adaptor into a spare power supply socket. If yourThis loom allows connection of thevehicle does not have a power supply socket, cut off the adaptor,vehicle’s OBD-II port to the C127 with noand connect the red wire to a fused 12 V source and the blackother wiring required. Connect to the OBD-wire to chassis ground.II port, and plug the other end into the

C125 Race Loom ECU connector. This GPSallows vehicles 2007 or newer to easilyuse the kit. Ensure that you connect the GPS L10 unit only into the lead

labelled “GPS”.61198 – CAN ECU TO DISPLAY LOOMThis loom lets a user install the kit into an ⚠ Plugging a GPS into the Accessory lead will damage theM400/M600/M800/M84 equipped car GPS.without custom wiring. Plug the AMPconnector into the ECU download port, and Buttonsthe other end into the C125 Race Loom

Plug in the button loom as supplied. The standard buttonECU connector.configuration is:

61199 – RS232 ECU TO DISPLAYFunction OperationLOOM

For RS232 based ECUs, plug this loom into Next Line Press the green buttonyour D9 download cable, and the other

Change Display Mode Press and hold the green (on some installations theinto the C125 Race Loom ECU connector. red) button for 0.5 secondsAdditional adapters may be required in

Alarm Acknowledge Press the red buttonsome instances.

Fastest Lap Reset Press and hold the red button for 3 seconds61259 – C125 INPUT LOOMWith the C127 I/O upgrade (#29800 ), Accessorythis loom adds extra inputs to your C125Race Loom in a simple, easy to install Use this lead to connect a MoTeC CAN based product to thefashion. The loom has eight 2 metre flying C127, such as LTC, Expander, HD-VCS, etc.leads, and adds 6 AV and 2 AT inputs to

ECUyour system.ECU communications are sent to the C127 via the ECU connector.

61222 – CURLY CORD LOOM Terminated looms are available for OBD-II, MoTeC M1 andTERMINATED Hundred Series ECUs and RS232 (M4, M48, M8 and other). TheseThe terminated curly cord allows the looms are listed under Accessories.buttons included with the kit to be easily ➩ RS232 connection may require an additional cable/adaptormoved onto the steering wheel. The loom to be used in conjunction with the RS232 adaptor.is pre-terminated with a 6 pin DTM, andhas 6 straight through wires, allowing for

Ethernetadditional buttons if required.This connector is used for communications between your C127and a PC during configuration.Supplied products may differ slightly to the images shown.

Further Information

See the C127 User Manual and individual datasheets for furtherinformation.

Check for latest version at www.motec.com