HML140ADATA SHEET_E.R. 10336.1

Edited Checked Approved EditionYin Dayan Wang Yi Edoardo.biscaldi 1

DATA SHEET

MODEL : HML140A

E.R. 10336.1

2011-12-15

HML140ADATA SHEET_E.R. 10336.1

1. BASIC DATA

1.1 OPERATION:Application: LBPRefrigerant: R600aExpansion device: Capillary tubeCooling: StaticEvaporating Temperature Range: -35 to -10°CMax Ambient Temperature: 43°C ( 110°F )Max Operating Discharge Temperature(1): 120°C ( 248°F )Max Peak Discharge Temperature (1, 2): 135°C ( 275°F )Max Operating Condensing Temperature: 60°C ( 140°F )Max Peak Condensing Temperature(2): 70°C ( 158°F )Max Winding Temperature: 130°C ( 266°F )Max Impurities: 30 mgMax Water Content: 100 mg

1.2 COMPRESSORDisplacement: 8.0 ccCylinder Bore: 24.4 mmStroke: 17.2 mmNet Weight(3): 6.3 KgShell size: 152 mmOil charge: 140 ccOil Type: WF5AOil viscosity(4): 5 cStSuction system: Direct

1.3 MOTORPower supply: 220-240 VVoltage limits: 187 - 264 VFrequency: 50 HzPhase: 1Motor Type: RSIR / RSCRElectrical Insulation Class: BMotor Type: 040 041Locked Rotor Current at 220V-Max value without RC: 7.5 A 7.6ALocked Rotor Current at 220V-After 4s without RC: 3.65 A 3.65ALocked Rotor Current at 220V-Max value with RC: 7.2 A 7.4ALocked Rotor Current at 220V-After 4s with RC: 3.55 A 3.55AMain Winding Resistance at 20°C ( 68°F ): 35.64 Ω 34.48 ΩStart Winding Resistance at 20°C ( 68°F ): 36.57 Ω 39.37 Ω

(1) Measured at 5 cm from the shell with insulated termocouples(2) For transient conditions during "Pull Down"(3) With oil and without external electricals(4) Measured at 40°C ( 104°F )

2011-12-15

HML140ADATA SHEET_E.R. 10336.1

1.4 ELECTRICALS

Motor-protectorManufacturer: ELECTRICA WanBao SENSATA SENSATAType: T0602 B45-120 4TM189NFB MSC COMBO 34F21J3Open temperature : 105-115 115-125 115-125 115~125Close temperature : 70-52 70-52 70-52 69~51U.T.C. A: 1.35 (70) 1.35 (70) 1.35(70) 1.03(70)Time check current at 25 A: 4.5 4.5 5.6Max current A: 10 12.2

PTC pillManufacture: MURATA SIEMENS

PTHE13AS220M300 A590-A100-A20Resistance at 25,100V: 12.75-21.25 Ohm 15.75-26.25 OhmV max: 350 V 350 VI max: 8 A 8 ACurie temp. 130°C 100°CDimensions: 16 mm (diameter), 16 mm (diameter),

2.5 mm (thickness) 3.2 mm (thickness)

PTC starting deviceManufacturer: WanBao TianYinType: QP3-22A BQP2-22

PTC+protectorManufacturer: SENSATAType: MSC COMBO 34F21J3

Connecting-boardType: GDFast-on size: 4.8 or 6.3 mm

Run capacitor (Optional)Type plastic or metallic caseCapacitor 3μfVmax 400 VWorking hours Depend on customer needs

2. CALORIMETER DATA

2.1 Calorimeter test Evaporating Temperature/Condensing Temperature (°C)

without capacitor

Cooling Capacity (W)

Input Power (W)

COP (W/W)

Current (A)

Test conditions according to ASHRAE:

Subcooling temperature: +32°C Cooling: Static cooling

Superheating temperature: +32°C Supply Voltage: 220 V

Suction temperature: +32°C Supply Frequency: 50 Hz

Room temperature: +32°C Run capacitor 0 μ f

8.83.7

0.64

79.8

1.18 1.51 2.28 1.60

-27/40°C

91.8 139 293.3 127.5

-30/55°C -23.3/55°C -10/55°C

77.5 91.7 128.4

0.64 0.66 0.77

10

2011-12-15

HML140ADATA SHEET_E.R. 10336.1

2.2 Calorimeter test Evaporating Temperature/Condensing Temperature (°C)

with capacitor

Cooling Capacity (W)

Input Power (W)

COP (W/W)

Current (A)

Test conditions according to ASHRAE:

Subcooling temperature: +32°C Cooling: Static cooling

Superheating temperature: +32°C Supply Voltage: 220 V

Suction temperature: +32°C Supply Frequency: 50 Hz

Room temperature: +32°C Run capacitor 3 μ f

3. OTHER PERFORMANCES

3.1 Starting test Motor Temp. / Equalized Press.without capacitor 90°C / 3 Bar A 43°C / 3.5 Bar A

Min. Starting Voltage (V)

According to ACC-CQ-PRO-99016.D

3.2 Acoustic test -25/+55°C -20/+50°C -23.3/+40°C

ISO3745 GB9098 USA STDA-weighted SPL (dBA) -

Vibration (m/s2) 0.47 -Gas pulse level TPI (mBar) - - -

3.3 Life test Wear High Temp. On Off

1000 h 2000 h

Test Results

(Test Report)Wear Test according to CECOMAF GT4003High Temperature Test according to CECOMAF GT4002On Off Test according to CECOMAF GT4004

3.4 Transport test 2 h x - 0.52 grms y - 0.52 grms z - 0.73 grms

Test Results

According to ASTM D 4728-2006

3.5 oil transport test Oil flow(g/h)

Test Results

According to ACC-CQ-ES-99002.D

N/A<4g

RD2011-01-035 RD2011-02-012 RD2011-03-018

PASS PASS PASS

162 164

500 KCycles

36.5

PASS PASS PASS

R&D/L_014_11

-30/55°C -23.3/55°C -10/55°C -27/40°C

N/A 141 N/A N/A

N/A 87.4 N/A N/A

N/A 1.61 N/A N/A

N/A 0.47 N/A N/A

2011-12-15

HML140ADATA SHEET_E.R. 10336.1

4. COMPRESSOR OUTLINE

2011-12-15