1
INTERNATIONAL INC. VAC VALVE 401, 401A & 401C Data Sheet Make vacuum bag connections positive and fast 5700 Skylab Road Huntington Beach CA 92647 USA Phone : +1 714-899-8100 Fax : +1 714-899-8179 E-mail : [email protected] Website : www.airtechonline.com Last updated : 2014-09-11 Catalog position : Vacuum valves and hoses As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA. DESCRIPTION Vac Valve 401 series is designed to work with our AQD 500 TF Quick Disconnects found in this section of our catalog. In combination with our AQD 500 Quick Disconnects, these vac valves have been used successfully at major aircraft companies holding full vacuum and pressure up to 15 bars at temperatures up to 500 °F (260 °C). Vac Valve 401: 6061T6 machined aluminum with a twist pin, round base. Vac Valve 401A: Same as Vac Valve 401 except with a machined, rectangular base. Vac Valve 401C: Our economical version of Vac Valve 401 fabricated from cast aluminum. TECHNICAL DATA Construction 2 pieces: base plate and locking top piece Material type Machined aluminum (VV401) / Machined aluminum (VV401A)/ Cast aluminum (VV401C) Material type of gasket Silicone Screw thread 1/4 inch male NPT Assembly style Twisted lock Service temperature 500 °F (260 °C) SIZES Product reference Base plate shape Base plate diameter Vac Valve 401 Round 2.50 inches (63 mm) Vac Valve 401A Rectangular 1.25 inches (width) x 3.5 inches (length) (31.75 mm x 88.9 mm) Vac Valve 401C Round 2.50 inches (63 mm) DIRECTIONS FOR USE > Insert the base plate under the vacuum bag. > A small cut is made in the vacuum bag in the area of the round opening in the base plate. > The top piece of the valve is inserted through the vacuum bag into the hole in the base plate. > The top piece is then twisted to provide a positive seal. > Other thread sizes available.

Data Sheet VAC VALVE 401, 401A & 401Cstore.airtechintl.com/catalog/pr_cat/vac_v/02_vac_v.pdf2014/09/11  · INTERNA TIONAL INC. Data Sheet VAC VALVE 401, 401A & 401C Make vacuum bag

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Data Sheet VAC VALVE 401, 401A & 401Cstore.airtechintl.com/catalog/pr_cat/vac_v/02_vac_v.pdf2014/09/11  · INTERNA TIONAL INC. Data Sheet VAC VALVE 401, 401A & 401C Make vacuum bag

INTERNATIONAL INC.

VAC VALVE 401, 401A & 401CData SheetMake vacuum bag connections positive and fast

5700 Skylab RoadHuntington BeachCA 92647 USA

Phone : +1 714-899-8100Fax : +1 714-899-8179

E-mail : [email protected] : www.airtechonline.com

Last updated : 2014-09-11

Catalog position : Vacuum valves and hosesAs the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is".Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein

represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.

DESCRIPTIONVac Valve 401 series is designed to work with our AQD 500 TF Quick Disconnects found in this section of ourcatalog. In combination with our AQD 500 Quick Disconnects, these vac valves have been used successfully atmajor aircraft companies holding full vacuum and pressure up to 15 bars at temperatures up to 500 °F (260 °C).Vac Valve 401: 6061T6 machined aluminum with a twist pin, round base.Vac Valve 401A: Same as Vac Valve 401 except with a machined, rectangular base.Vac Valve 401C: Our economical version of Vac Valve 401 fabricated from cast aluminum.

TECHNICAL DATAConstruction 2 pieces: base plate and locking top piece

Material typeMachined aluminum (VV401) /Machined aluminum (VV401A)/Cast aluminum (VV401C)

Material type of gasket SiliconeScrew thread 1/4 inch male NPTAssembly style Twisted lockService temperature 500 °F (260 °C)

SIZESProduct reference Base plate shape Base plate diameter

Vac Valve 401 Round 2.50 inches (63 mm)

Vac Valve 401A Rectangular 1.25 inches (width) x 3.5 inches (length) (31.75 mm x 88.9 mm)

Vac Valve 401C Round 2.50 inches (63 mm)

DIRECTIONS FOR USE> Insert the base plate under the vacuum bag.> A small cut is made in the vacuum bag in the area of the round opening in the base plate.> The top piece of the valve is inserted through the vacuum bag into the hole in the base plate.> The top piece is then twisted to provide a positive seal.

> Other thread sizes available.