Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Data Sheet: STAR.533.R2
www.aep.it SSttaarr Indicatore palmare
professionale
STAR è uno indicatore professionale ergonomico
estremamente versatile e semplice da usare per
misure di FORZA, PESO, PRESSIONE (gas),
DEPRESSIONE (vuoto) COPPIA e SPOSTAMENTO.
All’ interno è possibile integrare un sensore di forza
(max. 5kN) o un sensore di pressione (relativo,
assoluto o differenziale max. 5bar) mentre
dall’ingresso esterno è possibile collegare sensori
estensimetrici con uscita in mV/V come: celle di
carico, trasduttori di forza, di pressione, di coppia e di
spostamento.
Internamente il microcontrollore elabora i segnali
proveniente dai sensori attraverso un convertitore
analogico digitale a 24bit (±50.000 divisioni a 2mV/V)
ad una frequenza di conversione variabile da 5Hz a
4800Hz rendendolo adattabile ad ogni applicazione
che possa richiedere sia alta risoluzione che alte
frequenze di campionamento.
La visualizzazione delle misure avviene tramite un
grande display grafico retro illuminato.
Star è dotato di interfaccia USB che permette sia la
comunicazione in real-time con un PC sia la ricarica
della batteria interna (Li-Ion) di lunga durata e di
grande affidabilità.
Oltre alla lettura diretta delle misure è possibile
rilevare PICCHI, bloccare la misura sul display con la
funzione di HOLD e tramite il DATA LOGGER interno è
possibile registrare fino a 130.000 misure a cadenza
programmate o manualmente tramite il tasto REC.
In OPZIONE è possibile integrare una interfaccia
WIRELESS che permette di comunicare con PC,
TABLET o PLC in tempo reale.
Applicazioni tipiche:
Taratura macchine prova materiali, banchi prova, misuratori di pressione, pressostati ecc..
Controlli Qualità nelle linee di produzione, laboratori di prova e taratura.
Prova molle sia in trazione che compressione.
Prove di attriti, di strappo capicorda, rivetti ecc…
Prove sulla chiusura di imballaggi e dispositivi di protezione.
Prove sulle saldatura di componenti elettronici.
Prove aperture e chiusura porte manuali e automatiche.
Prove sulla movimentazione dei carichi manuali o automatici.
Prove su filtri, prove di perdita, di vuoto, analisi della variazione di pressioni nel tempo.
Monitoraggio wireless di carichi sospesi, pesatura mobile.
Monitoraggio pressione ambientale. (Barometro)
Taratura chiavi dinamometriche a scatto o a lettura diretta, avvitatori .
Monitoraggio fessure con sensori di spostamento nell’edilizia. (fessurimetro)
Pressione
Forza
Coppia
Spostamento
nelle tue
MANI
Allestimenti disponibili:
Con sensore interno per misure di FORZA e PESO in
compressione e trazione con campi da 10N (1kg) a 5kN
(500kg)
Con sensori esterni(1)
come celle di carico o trasduttori di
forza con campi normalizzati fino a 500 t (5000kN)
Con sensore interno per misure in DEPRESSIONE (vuoto),
PRESSIONE assoluta, relativa o differenziale in gas (NO
liquidi), campi da 100mbar a 5bar (1.5 a 70psi).
Con sensori esterni(1)
come i modelli TP16 o TP1 per
misurare pressioni più elevate con campi normalizzati
fino a 2000bar (29000psi) utilizzabili per gas e liquidi.
Con sensore esterni(1)
come i modelli TRX, TRS, RT2,
uTOR per misurare COPPIE statiche o dinamiche con
campi normalizzati da 1 a 5000 Nm.
Possibilità di registrare PICCHI continui in senso Orario e
Antiorario ad elevata velocità 4.8kHz.
Possibilità di registrare 1° PICCO con soglia
programmabile per verificare chiavi dinamometriche.
Con sensori esterni(1)
come il modello LDT per misure di
SPOSTAMENTO con campi normalizzati da 5 a 100 mm.
STAR può essere allestito in OPZIONE con la trasmissione
WIRELESS, che consente di trasmettere dati direttamente
ad un PC ad un TABLET o PLC.
Con l’ausilio del software WinWIMOD è possibile creare
una rete NETWORK con un massimo di 32 unità, la rete
può essere composta sia da strumenti STAR che da
sensori interfacciati con WIMOD.
(1) STAR riconosce automaticamente un massimo di 7 trasduttori collegati alternativamente,
Auto Configurandosi con i parametri dedicati (Unità di Misura, Filtro, Risoluzione).
E’ possibile collegare sensori diversi per effettuare misure di FORZA, PESO, PRESSIONE,
COPPIA e SPOSTAMENTO.
Caratteristiche principali:
ACCURATEZZA sensore interno PRESSIONE: 0.10% F.S. (OPZIONE 0.05% F.S.)
ACCURATEZZA Sensore interno FORZA: 0.05% F.S.
ACCURATEZZA canale esterno : 0.01% F.S.
Temperatura di RIFERIMENTO 23°C, Temperatura di Esercizio da 0 a +50°C Effetto della temperatura (10°C): sullo zero ≤ ± 0.01%, sul fondo scala≤ ± 0.01%
Segnale INGRESSO esterno 2mV/V (350 o 700Ω sistema 4 fili) alimentazione 5Vdc
Risoluzione standard±50.000 divisioni a 2mV/V
DISPLAY LCD grafico ad ALTA RISOLUZIONE (128x64 dots) con 3 livelli di retro illuminazione per
adeguarsi a tutte le condizioni di luminosità esterna e con la possibilità di ruotare la
visualizzazione di 180°.
Riconoscimento AUTOMATICO dei trasduttori esterni (max. 7) di FORZA, PESO, DEPRESSIONE,
PRESSIONE, COPPIA e SPOSTAMENTO.
UNITA’ DI MISURA programmabili:
FORZA e PESO: kg - g - t - N - daN - kN - MN – lb - klb
PRESSIONE: bar-mbar-psi-MPa-kPa-Pa-mH2O-inH2O-kg/cm2-mmHg-cmHg-inHg-atm
COPPIA: Nm – Nmm – kgm – kNm - in.lbf - ft.lbf – gcm - kgmm
LUNGHEZZA: mm – inch
CALIBRAZIONI DIGITALI protette da Password con programmazione Fondo Scala o con la
“LINEARIZZAZIONE per punti” dei trasduttori, per ogni trasduttore è possibile calibrare
separatamente sia il campo positivo che negativo. (Esempio: Trazione e Compressione)
DATALOGGER consente di memorizzare misure e di mantenerle nella memoria interna anche in
caso di spegnimento dello strumento. (max. 130.000 registrazioni)
La registrazione avviene sia in modo AUTOMATICA programmando un intervallo di tempo (da 1
sec a 24 ore) oppure in modo MANUALE tramite il tasto REC.
I dati possono essere successivamente visualizzati sul display o scaricati attraverso il potente
software Quick Analyzer per la creazione di grafici, esportazione in Excel , stampa di report etc.
RISOLUZIONE programmabile.
FILTRO digitale e CONVERSIONI al SECONDO (da 5 a 4800) programmabili.
Funzione di ZERO che permette di azzerare la misura istantaneamente.
Funzione di HOLD che permette di congelare temporaneamente la misura per poterla analizzare.
Funzione di PICCO (positivo e negativo).
Batteria interna Li-Ion che garantisce una AUTONOMIA di 24 ore con retro illuminazione attiva.
In modalità DATALOGGER Impostando una registrazione ogni 5 min. è possibile effettuare
registrazioni per circa 100 ore senza ricaricare lo strumento.
Funzione di AUTO POWER OFF programmabile da 1 a 99 minuti.
Funzione OROLOGIO (ore, minuti) e CALENDARIO (giorno, mese) interno.
Comunicazione seriale tramite porta USB, Trasmissione dati WIRELESS (OPZIONE).
Grado di protezione (EN 60529) IP40 , contenitore in ALLUMINIO verniciato, PESO ∼ 0.7kg
Codifica d’acquisto:
STAR Sensore INTERNO trasmissione WIRELESS
500 mbar 500MBARA W 1 bar 1BARA
2.5 bar 2.5BARA
PRESSIONE
ASSOLUTA
(Barometro) 5 bar 5BARA
100mbar 100MBAR 500 mbar 500MBAR
1 bar 1BAR 2.5 bar 2.5BAR
PRESSIONE
RELATIVA
5 bar 5BAR 100mbar 100MBARV 500 mbar 500MBARV
1 bar 1BARV 2.5 bar 2.5BARV
PRESSIONE
RELATIVA
VUOTO
5 bar 5BARV 100mbar 100MBARD 500 mbar 500MBARD
1 bar 1BARD 2.5 bar 2.5BARD
PRESSIONE
DIFFERENZIALE
5 bar 5BARD 10 N 10N 25 N 25N 50 N 50N
100 N 100N 250 N 250N 500 N 500N 1000 N 1KN 3000 N 3KN
FORZA
5000 N 5KN
Accessori a corredo:
Valigetta in ABS
Alimentatore con cavo USB
Esempi: STAR NO sensore INTERNO Ingresso ESTERNO max. 7 sensori Uscita USB
STARW NO sensore INTERNO Ingresso ESTERNO max. 7 sensori Uscita USB Trasmissione Wireless STAR1BAR Sensore INTERNO 1bar Relativo Ingresso ESTERNO max. 7 sensori Uscita USB
STAR100NW Sensore INTERNO 100N Ingresso ESTERNO max. 7 sensori Uscita USB Trasmissione Wireless
Risoluzione sensore interno PRESSIONE: bar mbar psi MPa kPa Pa mH2O
FS Ris. FS Ris. FS Ris. FS Ris. FS Ris. FS Ris. FS Ris.
0.1000 0.0001 100.00 0.01 1.4500 0.0001 0.0100 0.0001 10.000 0.001 10000 1 1.0000 0.0001
0.5000 0.0001 500.00 0.10 7.2000 0.0010 0.0500 0.0001 50.000 0.005 50000 5 5.0000 0.0005
1.0000 0.0001 1000.0 0.1 14.500 0.0001 0.1000 0.0001 100.00 0.01 100000 10 10.000 0.001
2.5000 0.0005 2500.0 0.5 36.200 0.005 0.2500 0.0001 250.00 0.05 250000 50 25.500 0.005
5.0000 0.0005 5000.0 0.5 72.500 0.005 0.5000 0.0001 500.00 0.05 500000 50 51.000 0.05
inH2O Kg/cm2 mmHg cmHg inHg Atm
FS Ris. FS Ris. FS Ris. FS Ris. FS Ris. FS Ris.
40.000 0.005 0.1000 0.0001 75.00 0.01 7.500 0.001 3.0000 0.0002 0.1000 0.0001
200.00 0.02 0.5000 0.0001 375.00 0.05 37.500 0.005 14.500 0.002 0.5000 0.0001
400.00 0.05 1.0000 0.0001 750.0 0.1 75.00 0.01 30.000 0.002 1.0000 0.0001
1000.00 0.10 2.5500 0.0005 1900.0 0.2 190.00 0.02 75.00 0.01 2.5000 0.0002
2000.0 0.2 5.0000 0.0005 3750.0 0.5 375.00 0.05 145.00 0.02 5.0000 0.0005
Pressione Limite 150% Fondo scala.
Risoluzione sensore interno FORZA: N daN kN kg g lb
FS Ris. FS Ris. FS Ris. FS Ris. FS Ris. FS Ris.
10.000 0.005 1.0000 0.0005 0.0100 0.0005 1.0000 0.0005 1000.0 0.5 2.2000 0.001
25.000 0.005 2.5000 0.0005 0.0250 0.0005 2.5000 0.0005 2500.0 0.5 5.5000 0.001
50.000 0.005 5.0000 0.0005 0.0500 0.0005 5.0000 0.0005 5000.0 0.5 11.000 0.001
100.00 0.05 10.000 0.005 0.1000 0.005 10.000 0.005 10000 5 22.000 0.01
250.00 0.05 25.000 0.005 0.2500 0.005 25.000 0.005 25000 5 55.000 0.01
500.00 0.05 50.000 0.005 0.5000 0.005 50.000 0.005 50000 5 110.00 0.01
1000.0 0.5 100.00 0.05 1.0000 0.0005 100.00 0.05 / / 220.00 0.1
3000.0 0.5 300.00 0.05 3.0000 0.0005 300.00 0.05 / / 660.00 0.1
5000.0 0.5 500.00 0.05 5.0000 0.0005 500.00 0.05 / / 1100.0 0.1
Forza Limite 150% Fondo scala.
Dimensioni (mm):
41126 Cognento (MODENA) Italy Via Bottego 33/A Tel:+39-(0)59-346441 Fax:+39-(0)59-346437 E-mail: [email protected]
Al fine di migliorare le prestazioni tecniche del prodotto, la società si riserva di apportare variazioni senza preavviso.
Data Sheet: STAR.533.R2
www.aep.it SSttaarr
Professional Hand
Held Indicator
STAR is a professional ergonomic indicator extremely
versatile and easy to be used for measurement of
FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE
and DISPLACEMENT.
It is possible to integrate inside a force sensor ( up to
max. 5kN) or a pressure sensor (relative, absolute or
differential up to max. 5bar) while from the external
input it is possible to connect strain gauges sensors
with output in mV/V such as: load cells, force
transducers, pressure transducers, torque and
displacement transducers.
Internally the microcontroller process the signals
coming from the sensors through a 24 bit (±50.000
divisions at 2mV/V) analogue digital converter at a
conversion frequency varying from 5Hz at 4800Hz by
making it suitable for every application that may
require both high resolution and high sampling
frequencies.
The display of measurements happens through a big
graphic backlighted display.
Star is equipped with USB interface that allows both
the communication in real-time with a PC and the
recharge of the internal long-lasting and great
reliability battery (Li-Ion).
In addition to the direct reading of the
measurements, it is possible to detect PEAKS, block
the measurement on the display thanks to the HOLD
function and through the internal DATA LOGGER it is
possible to record up to 130.000 measurement at
programmed intervals or manually through the REC
button.
On request, as an OPTION it is possible to integrate a WIRELESS interface that allows to communicate with
PC, TABLET or PLC in real time.
Typical Applications:
Calibration of materials test machines, test benches, pressure tester, pressure switch etc.
Quality controls in the production lines, calibration and test laboratories.
Compression and tension tests on springs.
Tests of frictions, cable terminal tearing , rivets etc.
Test of lockup on both packing and protection devices.
Test on welding of electronic components.
Test of opening and closing of both manual and automatic doors.
Test of the handling of both manual and automatic loads.
Test on filters, loss and vacuum tests, analysis of pressures variation in the time.
Wireless monitoring of hanging loads, mobile weighing.
Environmental pressure monitorino. (Barometer)
Calibration of: release and direct reading torque keys, screw drivers.
Monitoring of cracks through displacement transducers in the building industry.
Pressure
Force
Torque
Displacement
in your
HANDS
Available combinations:
With internal sensor to measure FORCE and WEIGHT in
compression and tension in ranges from 10N (1kg) up to
5kN (500kg)
With external sensors (1)
such as load cells or force
transducers with standardized ranges up to 500 t
(5000kN)
With internal sensor to measure: the VACUUM, a
relative, absolute or differential PRESSURE in gas (NO
liquids), with ranges from 100mbar up to 5bar (1.5 a
70psi).
With external sensors (1)
such as TP16 or TP1 models to
measure higher pressures with standardized ranges up to
2000bar (29000psi) suitable for both gas and liquids.
With external(1)
sensors such as TRX, TRS, RT2, uTOR
models to measure static or dynamic TORQUES with
standardized ranges from 1 up to 5000 Nm.
Possibility of recording continuous PEAKS in clockwise
and anticlockwise direction at high speed, 4.8kHz.
Possibility of recording 1° PEAK with programmable
threshold to test torque keys.
With external(1)
sensors such us LDT model to measure
the DISPLACEMENT with standardized ranges from 5 up
to 100 mm.
STAR can be manufactured on REQUEST equipped with
the WIRELESS transmission, which allows to transmit the
data directly to a PC and to TABLET or a PLC.
By using WinWIMOD software it is possible to create a
NETWORK with a max. number of 32 units, the net can
consist of both STAR instruments and sensors interfaced
with WIMOD.
(2) STAR automatically recognizes a max. number of 7 transducers alternatively connected , by
Auto Configuring itself with the dedicated parameters (Measurement unit, Filter, Resolution).
It is possible to connect different sensors to perform measurements of FORCE, WEIGHT,
PRESSURE, TORQUE and DISPLACEMENT.
Main characteristics:
PRESSURE internal sensor ACCURACY: 0.10% F.S. (ON REQUEST 0.05% F.S.)
FORCE internal sensor ACCURACY: 0.05% F.S.
External channel ACCURACY : 0.01% F.S.
REFERENCE temperature 23°C, Service temperature from 0 to +50°C Temperature effect (10°C): on zero ≤ ± 0.01%, on full scale≤ ± 0.01%
External INPUT signal 2mV/V (350 or 700Ω 4 wires system) 5Vdc power supply
Standard resolution ±50.000 divisions at 2mV/V
HIGH RESOLUTION (128x64 dots) LCD graph DISPLAY with 3 levels of backlighting to adapt itself
to any conditions of external brightness and with the possibility of rotating the visualization of
180°.
AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT
external transducers (max. 7)
Programmable MEASUREMENT UNIT:
FORCE and WEIGHT: kg - g - t - N - daN - kN - MN – lb - klb
PRESSURE: bar-mbar-psi-MPa-kPa-Pa-mH2O-inH2O-kg/cm2-mmHg-cmHg-inHg-atm
TORQUE: Nm – Nmm – kgm – kNm - in.lbf - ft.lbf – gcm - kgmm
LENGTH: mm – inch
DIGITAL CALIBRATIONS protected by Password with full scale programming or with the
“LINEARIZATION by points” of transducers, for every transducer it is possible to separately
calibrate both the positive and the negative field. (Example: Tension and Compression)
DATALOGGER allows to memorize measurements and to keep them in the internal memory even
in case of instrument switching off. (max. 130.000 recordings)
Recording can be performed either in AUTOMATIC mode by programming an interval of time
(from 1 sec up to 24 hours) or in MANUAL mode through the REC button.
The data can be then showed on the display or downloaded through the powerful software Quick
Analyzer for creating graphs, exports in Excel , printing of reports etc.
Programmable RESOLUTION.
Digital FILTER and CONVERSIONS per SECOND (from 5 to 4800) programmable
ZERO function that allows to instantly set to zero the measurement.
HOLD function that allows to temporarily “freeze” the measurement to be able to analyze it.
PEAK function (positive e negative).
Li-Ion internal battery which ensures a 24 hours AUTONOMY when backlighting is activated.
In DATALOGGER mode by setting a recording every 5 min. it is possible to perform recordings for
approx. 100 hours without recharging the instrument.
AUTO POWER OFF programmable function from 1 up to 99 minutes
CLOCK function (hours, minutes) and internal CALENDAR (day, month).
Serial communication through USB port, WIRELESS data Transmission (ON REQUEST).
Protection grade (EN 60529) IP40 , case made of painted ALUMINUM, WEIGHT ∼ 0.7kg
Purchase codes:
STAR INTERNAL sensor WIRELESS transmission
500 mbar 500MBARA W 1 bar 1BARA
2.5 bar 2.5BARA
ABSOLUTE
PRESSURE
(Barometer) 5 bar 5BARA
100mbar 100MBAR 500 mbar 500MBAR
1 bar 1BAR 2.5 bar 2.5BAR
RELATIVE
PRESSURE
5 bar 5BAR 100mbar 100MBARV 500 mbar 500MBARV
1 bar 1BARV 2.5 bar 2.5BARV
RELATIVE
PRESSURE
VACUUM
5 bar 5BARV 100mbar 100MBARD 500 mbar 500MBARD
1 bar 1BARD 2.5 bar 2.5BARD
DIFFERENTIAL
PRESSURE
5 bar 5BARD 10 N 10N 25 N 25N 50 N 50N
100 N 100N 250 N 250N 500 N 500N 1000 N 1KN 3000 N 3KN
FORCE
5000 N 5KN
Included accessories:
Travelling case made of ABS
Feeder with USB cable
Examples: STAR NO INTERNAL sensor EXTERNAL input max. 7 sensors USB output
STARW NO INTERNAL sensor EXTERNAL input max. 7 sensors USB ouptut Wireless transmission STAR1BAR INTERNAL sensor 1bar Relative EXTERNAL input max. 7 sensors USB output
STAR100NW INTERNAL sensor 100N EXTERNAL input max. 7 sensors USB output Wireless transmission
PRESSURE internal sensor resolution: bar mbar psi MPa kPa Pa mH2O
FS Ris. FS Ris. FS Ris. FS Ris. FS Ris. FS Ris. FS Ris.
0.1000 0.0001 100.00 0.01 1.4500 0.0001 0.0100 0.0001 10.000 0.001 10000 1 1.0000 0.0001
0.5000 0.0001 500.00 0.10 7.2000 0.0010 0.0500 0.0001 50.000 0.005 50000 5 5.0000 0.0005
1.0000 0.0001 1000.0 0.1 14.500 0.0001 0.1000 0.0001 100.00 0.01 100000 10 10.000 0.001
2.5000 0.0005 2500.0 0.5 36.200 0.005 0.2500 0.0001 250.00 0.05 250000 50 25.500 0.005
5.0000 0.0005 5000.0 0.5 72.500 0.005 0.5000 0.0001 500.00 0.05 500000 50 51.000 0.05
inH2O Kg/cm2 mmHg cmHg inHg Atm
FS Ris. FS Ris. FS Ris. FS Ris. FS Ris. FS Ris.
40.000 0.005 0.1000 0.0001 75.00 0.01 7.500 0.001 3.0000 0.0002 0.1000 0.0001
200.00 0.02 0.5000 0.0001 375.00 0.05 37.500 0.005 14.500 0.002 0.5000 0.0001
400.00 0.05 1.0000 0.0001 750.0 0.1 75.00 0.01 30.000 0.002 1.0000 0.0001
1000.00 0.10 2.5500 0.0005 1900.0 0.2 190.00 0.02 75.00 0.01 2.5000 0.0002
2000.0 0.2 5.0000 0.0005 3750.0 0.5 375.00 0.05 145.00 0.02 5.0000 0.0005
Limit pressure: 150% Full scale.
FORCE internal sensor resolution: N daN kN kg g lb
FS Ris. FS Ris. FS Ris. FS Ris. FS Ris. FS Ris.
10.000 0.005 1.0000 0.0005 0.0100 0.0005 1.0000 0.0005 1000.0 0.5 2.2000 0.001
25.000 0.005 2.5000 0.0005 0.0250 0.0005 2.5000 0.0005 2500.0 0.5 5.5000 0.001
50.000 0.005 5.0000 0.0005 0.0500 0.0005 5.0000 0.0005 5000.0 0.5 11.000 0.001
100.00 0.05 10.000 0.005 0.1000 0.005 10.000 0.005 10000 5 22.000 0.01
250.00 0.05 25.000 0.005 0.2500 0.005 25.000 0.005 25000 5 55.000 0.01
500.00 0.05 50.000 0.005 0.5000 0.005 50.000 0.005 50000 5 110.00 0.01
1000.0 0.5 100.00 0.05 1.0000 0.0005 100.00 0.05 / / 220.00 0.1
3000.0 0.5 300.00 0.05 3.0000 0.0005 300.00 0.05 / / 660.00 0.1
5000.0 0.5 500.00 0.05 5.0000 0.0005 500.00 0.05 / / 1100.0 0.1
Limit force: 150% Full scale.
Dimensions (mm):
41126 Cognento (MODENA) Italy Via Bottego 33/A Tel:+39-(0)59-346441 Fax:+39-(0)59-346437 E-mail: [email protected]
In order to improve the technical performances of the product, the company reserves the right to make any change without notice.