Data Sheet

1. Hobbyking S5040D X/Large Digital Titanium Gear Servo (HV) 177g / 0.18s / 39.8kg

Hobbyking Extra-Large S5040D Digital Titanium Gear Servo, high voltage 6v~7.2v with alloy heatsink casing. Specifications: Weight: 177.5g Direction: Clockwise/pulse travelling 1000~2000us Dimensions: 60.1 x 30.1 x 59.7mm Operating Voltage: 6v~7.2v Torque: 33.5kg/cm @ 6v, 39.8kg/cm @ 7.2v Speed (sec/60 deg): 0.20 @ 6v, 0.18 @ 7.2v Motor Type: Carbon Brushed Middle Case: Aluminium Heat Sink Lead/Plug: JR Type Dual Ball Bearing Titanium Alloy Gear

Weight (g) 178

Torque (kg) 39.8

Speed (Sec/60deg) 0.18

A(mm) 68

B(mm) 60

C(mm) 62

D(mm) 30

E(mm) 75

F(mm) 50

2. VSD-22YMB HV (7.2v) Winch Servo 56g/11kg/0.60 (360 Degree)

Metal Gear High Torque & High Voltage sail boat winch servo with alloy mid case.

Specs: Operating Voltage: 6v~7.2v Operating Speed: 0.72s/360 degree @ 6v No Load 0.60s/360 degree @ 7.2v no load Stall Torque: 9.5kgf @ 6v, 11kgf @ 7.2v Weight: 56g Size: 40.6x20x38.9mm

Weight (g) 56

Torque (kg) 11


A(mm) 44

B(mm) 40

C(mm) 39

D(mm) 20

E(mm) 54

F(mm) 27

3. Sail Winch Servo 13kg / 0.7sec (360deg) / 55g

Sail Winch Servo 13kg / 0.7sec (360deg) / 55g Spec. Weight: 55g Dimensions: 40.5 x 20.2 x 38mm Speed: 0.9sec / 360deg (4.8v) - 0.7sec / 360deg (6.0v) Torque: 11kg.cm (4.8v) - 13kg.com (6.0v) Operating voltage: 4.8 - 6.0V Gear train: Metal

Weight (g) 55

Torque (kg) 13


A(mm) 44

B(mm) 41

C(mm) 40

D(mm) 20

E(mm) 58

F(mm) 27

4. BMS-616MG+HS Super Strong Servo (Mos-FET) for buggy 10.2kg / .12sec / 46.5g

BMS-616MG+HS Super Strong Servo (Mos-FET) for buggy 10.2kg / .12sec / 46.5g The servo designed for racing only, due to racing tough competition make servo hot even over use, the upgrade assist parts are heat sink settle down motor overuse. With a servo accessory package and is made with a heavy duty servo case, the servo is designed for R/C high performance Car applications. Double ball bearing with flexible rubber waterproof, otherwise the output spline is same with Futaba 25 tooth. This servo comes with JR/Hitec S Connector also known as a "Universal Connector". Even thought this servo comes with JR/Hitec S Connectors, this servo is electrically compatible with Futaba receivers. 1. Metal gear 2. curve gear with smooth.

3. Double M9.6 ball bearing (si-oil) 4. 3 pole strong torque of motor with low signal affect and success get CE certification. 5. Rubber fitting case for waterproof 6. Same with Futaba 25 tooth spline 7. Heavy duty servo case 8. middle of heat sink Weight: 46.5 grams / 1.66 oz. Dimensions: 40.5 x 20 x 38.5 mm / 1.60 x 0.78 x 1.54 inch Torque At 6.0V: 10.2kg-cm , 128 oz-in Speed At 6.0V: 0.12 sec / 60° at no load **Please take note: We have found some units to have the incorrect sticker. Showing BMS-616MG+HG, instead of BMS-616MG+HS.

Weight (g) 46.5

Torque (kg) 10.2


A(mm) 42

B(mm) 41

C(mm) 38

D(mm) 20

E(mm) 55

F(mm) 27

5. BMS-616DMG+HS Digital Buggy Servo (MG) 10.2kg / .12sec / 46.5g

BMS-616DMG+HS Super Strong Digital Servo for bugggy (Metal Gear)10.2kg / .12sec / 46.5g Double ball bearing (Si-oil) CE Certified Strong 3 Pole Motor Heavy duty sealed water proof case Alloy heatsink Digital signal design with 100% fitting square PWS Automatic measures central ms ALU 6061 alloy and C95 gear material Digital IC (SOP package with 12bits transfer data) MOS-FET driver (spirited driver able to push over 7A power) Weight: 46.5g / 1.66oz Dimensions: 40.5 x 20 x 38.5mm / 1.60" x 0.78" x 1.54" Torque At 6.0V: 10.2kg/cm , 136 oz/in Speed At 6.0V: 0.12 sec / 60° at no load Operating voltage: 4.8 - 6.0V

Weight (g) 46.5

Torque (kg) 10.2


A(mm) 42

B(mm) 41

C(mm) 38

D(mm) 20

E(mm) 55

F(mm) 26

6. BMS-621DMG+HS High Speed Digital Servo (MG) 7.2kg / .10sec / 46.5g

BMS-621DMG+HS High Speed Digital Servo (Metal Gear)7.2kg / .10sec / 46.5g Double ball bearing (Si-oil) CE Certified Strong 3 Pole Motor Heavy duty sealed water proof case Alloy heatsink Digital signal design with 100% fitting square PWS Automatic measures central ms ALU 6061 alloy and C95 gear material Digital IC (SOP package with 12bits transfer data) MOS-FET driver (spirited driver able to push over 7A power)

Weight: 46.5g / 1.66oz Dimensions: 40.5 x 20 x 38.5mm / 1.60" x 0.78" x 1.54" Torque At 6.0V: 7.2kg/cm , 109 oz/in Speed At 6.0V: 0.10 sec / 60° at no load Operating voltage: 4.8 - 6.0V

Weight (g) 46.5

Torque (kg) 7.2


A(mm) 42

B(mm) 41

C(mm) 38

D(mm) 20

E(mm) 55

F(mm) 26

7. Turnigy 380MAX Micro Servo (Metal Gear) 4.1kg / .16sec / 17.4g

Turnigy 380MAX Micro Servo (Metal Gear) 4.1kg / .16sec / 17.4g This servo comes with a servo accessory package. This servo is designed to be used in R/C glider applications. Increase material of gear with carbon nylon gears and focus on the curve of gear. otherwise the ourput spline is same with Futaba 25 tooth. This servo comes with JR/Hitec S Connector also known as a "Universal Connector". Even thought this servo comes with JR/Hitec S Connectors, this servo is electrically compatible with Futaba receivers. 1. Metal gear

2. curve gear with smooth. 3. M9.6 ball bearing (si-oil) 4. Extra Strong torque with low signal affect and success get CE certification. 5. Rubber fitting case for waterproof 6. Designed to be used in R/C glider applications. 7. Same with Futaba 25 tooth spline Weight: 17.4grams / 0.58oz Dimensions: 26 x 13 x 26 mm / 1.16 x 0.51 x 1.02 inch Torque At 4.8V: 4.1kg/cm , 57 oz/in Torque At 6.0V: 4.7kg/cm , 62 oz/in Speed At 4.8V: 0.16sec / 60 deg at no load Speed At 6.0V: 0.14sec / 60 deg at no load 8. BMS-385DMAX Digital Servo (Metal Gear) 4.2kg / .15sec / 16.5g

BMS-385DMAX Digital Servo (Metal Gear) 4.2kg / .15sec / 16.5g This servo is designed to be used in R/C glider applications. By using carbon nylon gears and optimizing the curvature of the gears, the gears are able to withstand large amounts of force. The servo will automatically learn the users transmitter pulse timings and lock into the signal every time. The servo also includes a signal buffer in the CPU with fail-safe functionality. The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide. 1. M9.6 ball bearing (si-oil) 2. Extra Strong torque with low signal affect and success get CE certification. 3. Rubber seals for waterproof case

4. Designed to be used in R/C glider applications. 5. Futaba compatible 25-tooth aluminum 6061 output splines 6. Digital motor drive with ultra-square PWM signal 7. Automatic determination of servo center pulse width 8. Metal gears of aluminum 6061 material combined with light and strong C95 material 9. Fail-Safe function 10. Digital control IC - SOP package with 12bit data transfer 11. MOS-FET motor driver chips that can handle 7A peak loads 12. Useable on 6.0V Weight: 16.5grams / 0.59oz Dimensions: 26 x 13 x 26 mm / 1.16 x 0.51 x 1.02 inch Torque At 4.8V: 4.2kg/cm , 57 oz/in Torque At 6.0V: 4.7kg/cm , 62 oz/in Speed At 4.8V: 0.15sec / 60 deg at no load Speed At 6.0V: 0.13sec / 60 deg at no load

Weight (g) 16.5

Torque (kg) 4.7


A(mm) 37

B(mm) 27

C(mm) 31.5

D(mm) 13

E(mm) 36

F(mm) 20

Documents

Data Sheet