W E A R E F U L L O F E N E R G Y

optimal solutions

04 www.stenca.com

DATA OF STENCA PIPE

Facing The Stenca Pipe-sections comes with a silicone coated glass fabric SCF/6 (Black) with a density of 600g/m2.

Integral Lap The integral lap ensures an easy installation of the pipe sections. Seal the sections with sealant Stenca Seal, which is a specially developed seal/adhesive.

Density The nominal density of the insulation sections is 66kg/m3. Total thickness is approximately 40 mm.

AssemblingWith tong and groove to ensure a waterproof installation of the pipe sections.

Acoustics Stenca Pipe can improve the level of environmental soundconsiderably. If a higher standard of acoustic insulation is necessary – please ask for acoustic documentation.

Handling and storage Easy to cut into any shape, bend, T-piece, pieces, etc. with an ordinary saw or knife. Stenca Pipe is waterproof. Can handle presure and is able to withstand foot traffic both before and after installation. The items should be stored dry and clean before use and they must be stored upright to prevent ovality. After installation of the pipe sections wipe them off with a moist cloth.

Maintenance Do not need maintenance after installation. Can be moved for inspection and reused. Does not wear down the pipes on which they are installed.

Environment No CFCs, HFCs or HCFCs that are harmful to the environ-ment is used in the manufacturing of Stenca Pipe products.

Health and safety By installment and cutting there are no release of anydangerous or harmful particles in the air, which can dam-age the respiratory, mucous membranes and skin ofthe workers. But because some dust will occur, we stillrecommend to wear a mask. A safety data sheet is availableand can be replied by all of Stenca Trading departments.

Dimensions Additional pipe dimensions can be carried out according to order – see technical data. Foam bends are divided into two sections, above six inches they are divided into four sections. Additional pipe dimensions can be carried out according to order.

Bends As standard the Stenca Pipe system comes with 90 de-gree elbows. However, we can provide you with different angles according to your request. As standard bends up to 10” comes without ceramic cloth - these must be wrapped with Stenca Insulation Tape.

TECHNICAL DATA OF STENCA PIPE

MaterialStenca Pipe is made of Formtex daltofoam TE 42200 foam, which is added fire retardant ingredients.

The surface consists of a silicone-coated glass fabric: code SCF/6

ColorColor of insulation material is dark grey. Color of surface is black.

PropertyDimensional stability: < 1 % PH value: 9,2

Lambda Lambda λ by 10 0C is 0,039 W/mK Lambda λ by 10 0C after 140 days ageing 0,042 W/mKLambda λ by 50 0C is 150 0C 0,042 W/mK Lambda λ by 50 0C after 140 days ageing by 150 0C 0,045 W/mK

C O L D H e a t F i r e i N s u L a t i O Na C O u s t i C s P r O j e C t i N g

a C C O m m O D a t i O N a D v i s i N g

DENMARKStenca A/S Svendborgvej 159220 Aalborg Ø

Tel.: +45 9632 4810Mail: info@stenca.dk

DENMARKStenca A/S Kanalen 16700 Esbjerg

Tel.: +45 9632 4890info@stenca.dk

NORWAYStenca NorgeFinnestadsvingen 14029 Stavanger

Tel.: +47 900 57461arvid@stenca.com

www.stenca.comFeedback from operators evaluating and using Stenca Pipe insulation on offshore Oil and Gas

Platforms and new build vessels, confirms the unike benefits of the product.

EXPERIENCE BY USING STENCA PIPE INSULATION ON OFFSHORE OIL AND GAS PLATFORM:“Hess Corporation DK has used Stenca Pipe Insulation on our operating platform SOUTH ARNE placed in theDanish sector of the North Sea. The first Stenca Pipe insulation was installed on one of our external processlines in 2004. Since, all other external process lines has been insulated with Stenca Pipe.

Experience regarding CUIDoing process pipeline inspections in different areas insulated with Stenca pipe, were controlled for possiblecorrosion and material durability. The conclusion: No sign of CUI has been found. No sign of instability or deterioration.

Experience with installation and dismantlingVery easy installation and can be done by none-skilled personnel. In connection with inspection it’s very easy todismantle and reinstate again.On behalf of our experience, we have chosen only to use Stenca Pipe Insulation on our two new wellheadplatforms placed and installed in 2013.Therefore, we can strongly recommend Stenca Pipe insulation on offshore utility and process lines.”

www.stenca.comwww.stenca.com

STENCA PIPE BENEFITS

Mineral Wool Mineral Wool Cellular Glass Cellular Glass STENCA

w. Galv. Steel w. SS 316 w. Galv. Steel w. SS 316 PIPE

Lowest installation cost

Lowest maintenance cost Long life durability+ 20 years ()

No Corrosion Under Insulation ()

Easy to install and reinstate

No hot work required Low weight(Below 80 kg/m³) High compressive strenght- step & foot traffic resistant Short delivery time - high capacity DNV-GL Certified product- fulfill NORSOK R-004 () ()

No internal water absorption No release of dangerous or harmfullparticles

Easy inspection

Prepared for Heat-Tracing

Installation by all weather conditions

Installed by one person

Limited need for training

Reuseable after inspection

Sea water resistant Anti-slippery surface and UV-resistant

Acoustic properties

Can be pre-installed onshore

Benefits

External insulation systems by temperatures between -50° C to +140° C

Cross reference scheme

BENEFITS

04 www.stenca.com

DATA OF STENCA PIPE

Facing The Stenca Pipe-sections comes with a silicone coated glass fabric SCF/6 (Black) with a density of 600g/m2.

Integral Lap The integral lap ensures an easy installation of the pipe sections. Seal the sections with sealant Stenca Seal, which is a specially developed seal/adhesive.

Density The nominal density of the insulation sections is 66kg/m3. Total thickness is approximately 40 mm.

AssemblingWith tong and groove to ensure a waterproof installation of the pipe sections.

Acoustics Stenca Pipe can improve the level of environmental soundconsiderably. If a higher standard of acoustic insulation is necessary – please ask for acoustic documentation.

Handling and storage Easy to cut into any shape, bend, T-piece, pieces, etc. with an ordinary saw or knife. Stenca Pipe is waterproof. Can handle presure and is able to withstand foot traffic both before and after installation. The items should be stored dry and clean before use and they must be stored upright to prevent ovality. After installation of the pipe sections wipe them off with a moist cloth.

Maintenance Do not need maintenance after installation. Can be moved for inspection and reused. Does not wear down the pipes on which they are installed.

Environment No CFCs, HFCs or HCFCs that are harmful to the environ-ment is used in the manufacturing of Stenca Pipe products.

Health and safety By installment and cutting there are no release of anydangerous or harmful particles in the air, which can dam-age the respiratory, mucous membranes and skin ofthe workers. But because some dust will occur, we stillrecommend to wear a mask. A safety data sheet is availableand can be replied by all of Stenca Trading departments.

Dimensions Additional pipe dimensions can be carried out according to order – see technical data. Foam bends are divided into two sections, above six inches they are divided into four sections. Additional pipe dimensions can be carried out according to order.

Bends As standard the Stenca Pipe system comes with 90 de-gree elbows. However, we can provide you with different angles according to your request. As standard bends up to 10” comes without ceramic cloth - these must be wrapped with Stenca Insulation Tape.

TECHNICAL DATA OF STENCA PIPE

MaterialStenca Pipe is made of Formtex daltofoam TE 42200 foam, which is added fire retardant ingredients.

The surface consists of a silicone-coated glass fabric: code SCF/6

ColorColor of insulation material is dark grey. Color of surface is black.

PropertyDimensional stability: < 1 % PH value: 9,2

Lambda Lambda λ by 10 0C is 0,039 W/mK Lambda λ by 10 0C after 140 days ageing 0,042 W/mKLambda λ by 50 0C is 150 0C 0,042 W/mK Lambda λ by 50 0C after 140 days ageing by 150 0C 0,045 W/mK

C O L D H e a t F i r e i N s u L a t i O Na C O u s t i C s P r O j e C t i N g

a C C O m m O D a t i O N a D v i s i N g

www.stenca.com www.stenca.com www.stenca.com

Mineral Wool Mineral Wool Cellular Glass Cellular Glass STENCA

w. Galv. Steel w. SS 316 w. Galv. Steel w. SS 316 PIPE

Lowest installation cost

Lowest maintenance cost Long life durability+ 20 years ()

No Corrosion Under Insulation ()

Easy to install and reinstate

No hot work required Low weight(Below 80 kg/m³) High compressive strenght- step & foot traffic resistant Short delivery time - high capacity DNV-GL Certified product- fulfill NORSOK R-004 () ()

No internal water absorption No release of dangerous or harmfull particles

Easy inspection

Prepared for Heat-Tracing

Installation by all weather conditions

Installed by one person

Limited need for training

Reuseable after inspection

Sea water resistant Anti-slippery surface and UV-resistant

Acoustic properties

Can be pre-installed onshore

Benefits

External insulation systems by temperatures between -50° C to +140° C

Cross reference scheme

BENEFITS

04 www.stenca.com

DATA OF STENCA PIPE

Facing The Stenca Pipe-sections comes with a silicone coated glass fabric SCF/6 (Black) with a density of 600g/m2.

Integral Lap The integral lap ensures an easy installation of the pipe sections. Seal the sections with sealant Stenca Seal, which is a specially developed seal/adhesive.

Density The nominal density of the insulation sections is 66kg/m3. Total thickness is approximately 40 mm.

AssemblingWith tong and groove to ensure a waterproof installation of the pipe sections.

Acoustics Stenca Pipe can improve the level of environmental soundconsiderably. If a higher standard of acoustic insulation is necessary – please ask for acoustic documentation.

Handling and storage Easy to cut into any shape, bend, T-piece, pieces, etc. with an ordinary saw or knife. Stenca Pipe is waterproof. Can handle presure and is able to withstand foot traffic both before and after installation. The items should be stored dry and clean before use and they must be stored upright to prevent ovality. After installation of the pipe sections wipe them off with a moist cloth.

Maintenance Do not need maintenance after installation. Can be moved for inspection and reused. Does not wear down the pipes on which they are installed.

Environment No CFCs, HFCs or HCFCs that are harmful to the environ-ment is used in the manufacturing of Stenca Pipe products.

Health and safety By installment and cutting there are no release of anydangerous or harmful particles in the air, which can dam-age the respiratory, mucous membranes and skin ofthe workers. But because some dust will occur, we stillrecommend to wear a mask. A safety data sheet is availableand can be replied by all of Stenca Trading departments.

Dimensions Additional pipe dimensions can be carried out according to order – see technical data. Foam bends are divided into two sections, above six inches they are divided into four sections. Additional pipe dimensions can be carried out according to order.

Bends As standard the Stenca Pipe system comes with 90 de-gree elbows. However, we can provide you with different angles according to your request. As standard bends up to 10” comes without ceramic cloth - these must be wrapped with Stenca Insulation Tape.

TECHNICAL DATA OF STENCA PIPE

MaterialStenca Pipe is made of Formtex daltofoam TE 42200 foam, which is added fire retardant ingredients.

The surface consists of a silicone-coated glass fabric: code SCF/6

ColorColor of insulation material is dark grey. Color of surface is black.

PropertyDimensional stability: < 1 % PH value: 9,2

Lambda Lambda λ by 10 0C is 0,039 W/mK Lambda λ by 10 0C after 140 days ageing 0,042 W/mKLambda λ by 50 0C is 150 0C 0,042 W/mK Lambda λ by 50 0C after 140 days ageing by 150 0C 0,045 W/mK

C O L D H e a t F i r e i N s u L a t i O Na C O u s t i C s P r O j e C t i N g

a C C O m m O D a t i O N a D v i s i N g

www.stenca.com www.stenca.com www.stenca.com

Mineral Wool Mineral Wool Cellular Glass Cellular Glass STENCA

w. Galv. Steel w. SS 316 w. Galv. Steel w. SS 316 PIPE

Lowest installation cost

Lowest maintenance cost Long life durability+ 20 years ()

No Corrosion Under Insulation ()

Easy to install and reinstate

No hot work required Low weight(Below 80 kg/m³) High compressive strenght- step & foot traffic resistant Short delivery time - high capacity DNV-GL Certified product- fulfill NORSOK R-004 () ()

No internal water absorption No release of dangerous or harmfullparticles

Easy inspection

Prepared for Heat-Tracing

Installation by all weather conditions

Installed by one person

Limited need for training

Reuseable after inspection

Sea water resistant Anti-slippery surface and UV-resistant

Acoustic properties

Can be pre-installed onshore

Benefits

External insulation systems by temperatures between -50° C to +140° C

Cross reference scheme

BENEFITS

04 www.stenca.com

DATA OF STENCA PIPE

Facing The Stenca Pipe-sections comes with a silicone coated glass fabric SCF/6 (Black) with a density of 600g/m2.

Integral Lap The integral lap ensures an easy installation of the pipe sections. Seal the sections with sealant Stenca Seal, which is a specially developed seal/adhesive.

Density The nominal density of the insulation sections is 66kg/m3. Total thickness is approximately 40 mm.

AssemblingWith tong and groove to ensure a waterproof installation of the pipe sections.

Acoustics Stenca Pipe can improve the level of environmental soundconsiderably. If a higher standard of acoustic insulation is necessary – please ask for acoustic documentation.

Handling and storage Easy to cut into any shape, bend, T-piece, pieces, etc. with an ordinary saw or knife. Stenca Pipe is waterproof. Can handle presure and is able to withstand foot traffic both before and after installation. The items should be stored dry and clean before use and they must be stored upright to prevent ovality. After installation of the pipe sections wipe them off with a moist cloth.

Maintenance Do not need maintenance after installation. Can be moved for inspection and reused. Does not wear down the pipes on which they are installed.

Environment No CFCs, HFCs or HCFCs that are harmful to the environ-ment is used in the manufacturing of Stenca Pipe products.

Health and safety By installment and cutting there are no release of anydangerous or harmful particles in the air, which can dam-age the respiratory, mucous membranes and skin ofthe workers. But because some dust will occur, we stillrecommend to wear a mask. A safety data sheet is availableand can be replied by all of Stenca Trading departments.

Dimensions Additional pipe dimensions can be carried out according to order – see technical data. Foam bends are divided into two sections, above six inches they are divided into four sections. Additional pipe dimensions can be carried out according to order.

Bends As standard the Stenca Pipe system comes with 90 de-gree elbows. However, we can provide you with different angles according to your request. As standard bends up to 10” comes without ceramic cloth - these must be wrapped with Stenca Insulation Tape.

TECHNICAL DATA OF STENCA PIPE

MaterialStenca Pipe is made of Formtex daltofoam TE 42200 foam, which is added fire retardant ingredients.

The surface consists of a silicone-coated glass fabric: code SCF/6

ColorColor of insulation material is dark grey. Color of surface is black.

PropertyDimensional stability: < 1 % PH value: 9,2

Lambda Lambda λ by 10 0C is 0,039 W/mK Lambda λ by 10 0C after 140 days ageing 0,042 W/mKLambda λ by 50 0C is 150 0C 0,042 W/mK Lambda λ by 50 0C after 140 days ageing by 150 0C 0,045 W/mK

C O L D H e a t F i r e i N s u L a t i O Na C O u s t i C s P r O j e C t i N g

a C C O m m O D a t i O N a D v i s i N g

www.stenca.com www.stenca.com www.stenca.com

Mineral Wool Mineral Wool Cellular Glass Cellular Glass STENCA

w. Galv. Steel w. SS 316 w. Galv. Steel w. SS 316 PIPE

Lowest installation cost

Lowest maintenance cost Long life durability+ 20 years ()

No Corrosion Under Insulation ()

Easy to install and reinstate

No hot work required Low weight(Below 80 kg/m³) High compressive strenght- step & foot traffic resistant Short delivery time - high capacity DNV-GL Certified product- fulfill NORSOK R-004 () ()

No internal water absorption No release of dangerous or harmfullparticles

Easy inspection

Prepared for Heat-Tracing

Installation by all weather conditions

Installed by one person

Limited need for training

Reuseable after inspection

Sea water resistant Anti-slippery surface and UV-resistant

Acoustic properties

Can be pre-installed onshore

Benefits

External insulation systems by temperatures between -50° C to +140° C

Cross reference scheme

BENEFITS

04 www.stenca.com

DATA OF STENCA PIPE

Facing The Stenca Pipe-sections comes with a silicone coated glass fabric SCF/6 (Black) with a density of 600g/m2.

Integral Lap The integral lap ensures an easy installation of the pipe sections. Seal the sections with sealant Stenca Seal, which is a specially developed seal/adhesive.

Density The nominal density of the insulation sections is 66kg/m3. Total thickness is approximately 40 mm.

AssemblingWith tong and groove to ensure a waterproof installation of the pipe sections.

Acoustics Stenca Pipe can improve the level of environmental soundconsiderably. If a higher standard of acoustic insulation is necessary – please ask for acoustic documentation.

Handling and storage Easy to cut into any shape, bend, T-piece, pieces, etc. with an ordinary saw or knife. Stenca Pipe is waterproof. Can handle presure and is able to withstand foot traffic both before and after installation. The items should be stored dry and clean before use and they must be stored upright to prevent ovality. After installation of the pipe sections wipe them off with a moist cloth.

Maintenance Do not need maintenance after installation. Can be moved for inspection and reused. Does not wear down the pipes on which they are installed.

Environment No CFCs, HFCs or HCFCs that are harmful to the environ-ment is used in the manufacturing of Stenca Pipe products.

Health and safety By installment and cutting there are no release of anydangerous or harmful particles in the air, which can dam-age the respiratory, mucous membranes and skin ofthe workers. But because some dust will occur, we stillrecommend to wear a mask. A safety data sheet is availableand can be replied by all of Stenca Trading departments.

Dimensions Additional pipe dimensions can be carried out according to order – see technical data. Foam bends are divided into two sections, above six inches they are divided into four sections. Additional pipe dimensions can be carried out according to order.

Bends As standard the Stenca Pipe system comes with 90 de-gree elbows. However, we can provide you with different angles according to your request. As standard bends up to 10” comes without ceramic cloth - these must be wrapped with Stenca Insulation Tape.

TECHNICAL DATA OF STENCA PIPE

MaterialStenca Pipe is made of Formtex daltofoam TE 42200 foam, which is added fire retardant ingredients.

The surface consists of a silicone-coated glass fabric: code SCF/6

ColorColor of insulation material is dark grey. Color of surface is black.

PropertyDimensional stability: < 1 % PH value: 9,2

Lambda Lambda λ by 10 0C is 0,039 W/mK Lambda λ by 10 0C after 140 days ageing 0,042 W/mKLambda λ by 50 0C is 150 0C 0,042 W/mK Lambda λ by 50 0C after 140 days ageing by 150 0C 0,045 W/mK

C O L D H e a t F i r e i N s u L a t i O Na C O u s t i C s P r O j e C t i N g

a C C O m m O D a t i O N a D v i s i N g

www.stenca.com www.stenca.com www.stenca.com

W E A R E F U L L O F E N E R G Y

optimal solutions

04 www.stenca.com

DATA OF STENCA PIPE

Facing The Stenca Pipe-sections comes with a silicone coated glass fabric SCF/6 (Black) with a density of 600g/m2.

Integral Lap The integral lap ensures an easy installation of the pipe sections. Seal the sections with sealant Stenca Seal, which is a specially developed seal/adhesive.

Density The nominal density of the insulation sections is 66kg/m3. Total thickness is approximately 40 mm.

AssemblingWith tong and groove to ensure a waterproof installation of the pipe sections.

Acoustics Stenca Pipe can improve the level of environmental soundconsiderably. If a higher standard of acoustic insulation is necessary – please ask for acoustic documentation.

Handling and storage Easy to cut into any shape, bend, T-piece, pieces, etc. with an ordinary saw or knife. Stenca Pipe is waterproof. Can handle presure and is able to withstand foot traffic both before and after installation. The items should be stored dry and clean before use and they must be stored upright to prevent ovality. After installation of the pipe sections wipe them off with a moist cloth.

Maintenance Do not need maintenance after installation. Can be moved for inspection and reused. Does not wear down the pipes on which they are installed.

Environment No CFCs, HFCs or HCFCs that are harmful to the environ-ment is used in the manufacturing of Stenca Pipe products.

Health and safety By installment and cutting there are no release of anydangerous or harmful particles in the air, which can dam-age the respiratory, mucous membranes and skin ofthe workers. But because some dust will occur, we stillrecommend to wear a mask. A safety data sheet is availableand can be replied by all of Stenca Trading departments.

Dimensions Additional pipe dimensions can be carried out according to order – see technical data. Foam bends are divided into two sections, above six inches they are divided into four sections. Additional pipe dimensions can be carried out according to order.

Bends As standard the Stenca Pipe system comes with 90 de-gree elbows. However, we can provide you with different angles according to your request. As standard bends up to 10” comes without ceramic cloth - these must be wrapped with Stenca Insulation Tape.

TECHNICAL DATA OF STENCA PIPE

MaterialStenca Pipe is made of Formtex daltofoam TE 42200 foam, which is added fire retardant ingredients.

The surface consists of a silicone-coated glass fabric: code SCF/6

ColorColor of insulation material is dark grey. Color of surface is black.

PropertyDimensional stability: < 1 % PH value: 9,2

Lambda Lambda λ by 10 0C is 0,039 W/mK Lambda λ by 10 0C after 140 days ageing 0,042 W/mKLambda λ by 50 0C is 150 0C 0,042 W/mK Lambda λ by 50 0C after 140 days ageing by 150 0C 0,045 W/mK

C O L D H e a t F i r e i N s u L a t i O Na C O u s t i C s P r O j e C t i N g

a C C O m m O D a t i O N a D v i s i N g

DENMARKStenca A/S Svendborgvej 159220 Aalborg Ø

Tel.: +45 9632 4810Mail: info@stenca.dk

DENMARKStenca A/S Kanalen 16700 Esbjerg

Tel.: +45 9632 4890info@stenca.dk

NORWAYStenca NorgeFinnestadsvingen 14029 Stavanger

Tel.: +47 900 57461arvid@stenca.com

www.stenca.comFeedback from operators evaluating and using Stenca Pipe insulation on offshore Oil and Gas

Platforms and new build vessels, confirms the unike benefits of the product.

EXPERIENCE BY USING STENCA PIPE INSULATION ON OFFSHORE OIL AND GAS PLATFORM: “Hess Corporation DK has used Stenca Pipe Insulation on our operating platform SOUTH ARNE placed in the Danish sector of the North Sea. The first Stenca Pipe insulation was installed on one of our external process lines in 2004. Since, all other external process lines has been insulated with Stenca Pipe.

Experience regarding CUI Doing process pipeline inspections in different areas insulated with Stenca pipe, were controlled for possible corrosion and material durability. The conclusion: No sign of CUI has been found. No sign of instability or deterioration.

Experience with installation and dismantling Very easy installation and can be done by none-skilled personnel. In connection with inspection it’s very easy to dismantle and reinstate again. On behalf of our experience, we have chosen only to use Stenca Pipe Insulation on our two new wellhead platforms placed and installed in 2013. Therefore, we can strongly recommend Stenca Pipe insulation on offshore utility and process lines.”

www.stenca.comwww.stenca.com

STENCA PIPE BENEFITS

W E A R E F U L L O F E N E R G Y

optimal solutions

04 www.stenca.com

DATA OF STENCA PIPE

Facing The Stenca Pipe-sections comes with a silicone coated glass fabric SCF/6 (Black) with a density of 600g/m2.

Integral Lap The integral lap ensures an easy installation of the pipe sections. Seal the sections with sealant Stenca Seal, which is a specially developed seal/adhesive.

Density The nominal density of the insulation sections is 66kg/m3. Total thickness is approximately 40 mm.

AssemblingWith tong and groove to ensure a waterproof installation of the pipe sections.

Acoustics Stenca Pipe can improve the level of environmental soundconsiderably. If a higher standard of acoustic insulation is necessary – please ask for acoustic documentation.

Handling and storage Easy to cut into any shape, bend, T-piece, pieces, etc. with an ordinary saw or knife. Stenca Pipe is waterproof. Can handle presure and is able to withstand foot traffic both before and after installation. The items should be stored dry and clean before use and they must be stored upright to prevent ovality. After installation of the pipe sections wipe them off with a moist cloth.

Maintenance Do not need maintenance after installation. Can be moved for inspection and reused. Does not wear down the pipes on which they are installed.

Environment No CFCs, HFCs or HCFCs that are harmful to the environ-ment is used in the manufacturing of Stenca Pipe products.

Health and safety By installment and cutting there are no release of anydangerous or harmful particles in the air, which can dam-age the respiratory, mucous membranes and skin ofthe workers. But because some dust will occur, we stillrecommend to wear a mask. A safety data sheet is availableand can be replied by all of Stenca Trading departments.

Dimensions Additional pipe dimensions can be carried out according to order – see technical data. Foam bends are divided into two sections, above six inches they are divided into four sections. Additional pipe dimensions can be carried out according to order.

Bends As standard the Stenca Pipe system comes with 90 de-gree elbows. However, we can provide you with different angles according to your request. As standard bends up to 10” comes without ceramic cloth - these must be wrapped with Stenca Insulation Tape.

TECHNICAL DATA OF STENCA PIPE

MaterialStenca Pipe is made of Formtex daltofoam TE 42200 foam, which is added fire retardant ingredients.

The surface consists of a silicone-coated glass fabric: code SCF/6

ColorColor of insulation material is dark grey. Color of surface is black.

PropertyDimensional stability: < 1 % PH value: 9,2

Lambda Lambda λ by 10 0C is 0,039 W/mK Lambda λ by 10 0C after 140 days ageing 0,042 W/mKLambda λ by 50 0C is 150 0C 0,042 W/mK Lambda λ by 50 0C after 140 days ageing by 150 0C 0,045 W/mK

C O L D H e a t F i r e i N s u L a t i O Na C O u s t i C s P r O j e C t i N g

a C C O m m O D a t i O N a D v i s i N g

DENMARKStenca A/S Svendborgvej 159220 Aalborg Ø

Tel.: +45 9632 4810Mail: info@stenca.dk

DENMARKStenca A/S Kanalen 16700 Esbjerg

Tel.: +45 9632 4890info@stenca.dk

NORWAYStenca NorgeFinnestadsvingen 14029 Stavanger

Tel.: +47 900 57461arvid@stenca.com

www.stenca.comFeedback from operators evaluating and using Stenca Pipe insulation on offshore Oil and Gas

Platforms and new build vessels, confirms the unike benefits of the product.

EXPERIENCE BY USING STENCA PIPE INSULATION ON OFFSHORE OIL AND GAS PLATFORM:“Hess Corporation DK has used Stenca Pipe Insulation on our operating platform SOUTH ARNE placed in theDanish sector of the North Sea. The first Stenca Pipe insulation was installed on one of our external processlines in 2004. Since, all other external process lines has been insulated with Stenca Pipe.

Experience regarding CUIDoing process pipeline inspections in different areas insulated with Stenca pipe, were controlled for possiblecorrosion and material durability. The conclusion: No sign of CUI has been found. No sign of instability or deterioration.

Experience with installation and dismantlingVery easy installation and can be done by none-skilled personnel. In connection with inspection it’s very easy todismantle and reinstate again.On behalf of our experience, we have chosen only to use Stenca Pipe Insulation on our two new wellheadplatforms placed and installed in 2013.Therefore, we can strongly recommend Stenca Pipe insulation on offshore utility and process lines.”

www.stenca.comwww.stenca.com

STENCA PIPE BENEFITS