DATA SHEET www.brocade.com

DATA CENTER

BROCADE VDX 6720 SWITCH

HIGHLIGHTS• Simplifies and automates network

architectures and enables elastic cloud networking with Brocade VCS Fabric technology

• Manages an entire VCS fabric as a single switch with Brocade VCS Logical Chassis

• Delivers high performance and ultra-low latency through wire-speed ports with 600-nanosecond port-to-port latency and automated hardware-based Inter-Switch Link (ISL) trunking

• Provides efficiently load-balanced multipathing at Layers 1, 2, and 3, and multiple Layer 3 gateways

• Simplifies virtualized server management by providing Virtual Machine (VM) mobility with dynamic server profile configuration and migration

• Provides storage connectivity for Fibre Channel over Ethernet (FCoE), iSCSI, and NAS

Revolutionizing the Way Data Center Networks Are Built

Seeking better ways to build clouds and virtualized data centers, today’s IT organizations are turning to high-performance networking solutions that increase flexibility through leading-edge technologies. The Brocade® VDX® 6720 Switch is a high-performance 10 Gigabit Ethernet (GbE) fixed configuration switch with LAN ports that supports the most demanding business applications. It is specifically designed to improve network utilization, maximize application availability, increase scalability, and dramatically simplify network architecture in virtualized data centers. The Brocade VDX 6720 with Brocade VCS® Fabric technology is an ideal platform for a variety of Top-of-Rack (ToR) fabric deployments (see Figure 1).

The Brocade VDX 6720 is available in two models—the 2U Brocade VDX 6720-60 with 60 10 GbE LAN ports, and the 1U Brocade VDX 6720-24 with 24 10 GbE LAN ports. Both models deliver high performance for

intra-rack traffic in virtualized environments, provide ultra-low latency of 600 nanoseconds for the same ASIC on the switch, and offer low power consumption, making the Brocade VDX 6720 ideal for demanding data center environments. This helps organizations design a network with no oversubscription for deterministic network performance and improved application response times. In addition, the Brocade VDX 6720 provides storage connectivity for Fibre Channel over Ethernet (FCoE), iSCSI, and NAS.

AN INTELLIGENT FOUNDATION FOR CLOUD COMPUTING Brocade VCS Fabric technology is an innovative technology that enables organizations to build high-performance, cloud-optimized data centers while preserving existing network designs and cabling, and gaining active-active server connections. For scale-out fabric architectures, Brocade VCS Fabric

technology allows organizations to flatten network designs, provide Virtual Machine (VM) mobility without network reconfiguration, and more efficiently manage the entire fabric. Learn more about Brocade VCS Fabric technology at www.brocade.com/vcs.

UNMATCHED SIMPLICITY AND AUTOMATION Brocade VCS Fabric technology helps streamline network operations and speed deployment with embedded features that enable automatic configuration and management. These features include:

• Brocade VCS Logical Chassis: Brocade VCS Logical Chassis enables organizations to manage an entire VCS fabric as a single switch, upgrade software across the fabric with one command, and centralize monitoring and troubleshooting to enhance the overall availability and reliability of the network. The single point of management eliminates the need to manually configure and manage each switch, simplifying

management, lowering operational costs, and reducing configuration errors. In addition, it offers the ability to push software upgrades across the fabric with a single command, accelerating deployment. VCS Logical Chassis also provides a single view of the fabric for easy monitoring and troubleshooting that minimizes time to repair network issues. For more information about VCS Logical Chassis, read the white paper An Overview of Brocade VCS Logical Chassis.

• Self-forming and self-healing fabric: Configuration is simplified with self-forming fabrics. Configuration and device information is known by all switches, allowing fabric switches to be added or removed, and physical or virtual servers to be relocated—without the

WHAT IS AN ETHERNET FABRIC?Compared to classic hierarchical Ethernet architectures, Ethernet fabrics provide higher levels of performance, utilization, availability, and simplicity. They are designed to be:

• Flatter: Eliminates the need for Spanning Tree Protocol (STP), while being completely interoperable with existing Ethernet networks

• Flexible: Can be architected in any topology to best meet the needs of any variety of workloads

• Resilient: Uses multiple “least cost” paths for high performance and high reliability

• Elastic: Scales easily up and down as needed

More advanced Ethernet fabrics borrow further from Fibre Channel fabric constructs:

• They are self-forming and function as a single logical entity, in which all switches automatically know about each other and all connected physical and logical devices.

• Management can then be domain-based rather than device-based, and defined by policy rather than repetitive procedures.

• These features, along with virtualization-specific enhancements, make it easier to explicitly address the challenges of VM automation within the network, thereby facilitating better IT automation.

Protocol convergence, such as Fibre Channel over Ethernet (FCoE), may also be a feature, intended as a means of better bridging LAN and Storage Area Network (SAN) traffic.

Learn more about Ethernet fabrics at www.brocade.com/ethernet-fabric.

Figure 1. Compared to classic Ethernet architectures, Ethernet fabrics—such as Brocade VCS fabrics—allow all paths to be active and provide greater scalability while reducing management complexity.

Servers with 10 Gbps Connections

Classic Hierarchical Ethernet Architecture

Servers with 10 Gbps Connections

Ethernet Fabric Architecture

Scalability

Core

Edge

Core

Aggr

egat

ion

Acce

ss

Figure 2. Brocade VCS Fabric technology simplifies the network architecture, enables unified storage connectivity, improves VM mobility, and allows the seamless insertion of services.

Dedicated FibreChannel SAN for Tier 1 applications

VCS fabricextension

Bladeservers Rack-mount

servers

REMOTEDATA CENTERPRIMARY

DATA CENTER

VM

VMVM

Corerouters

FCoE/iSCSI/NASstorage

VM

VM

VM

VM

VM

VM

SAN

PublicNetwork

VM

VCS fabricextension

NativeFibre ChannelSecurity services

(firewall, encryption)

Layer 4–7application delivery

fabric requiring manual reconfiguration. In addition, fabrics are self-healing, increasing network resiliency. The fabric redirects traffic if a link fails, helping to ensure uninterrupted traffic flow and prevent data loss.

MAXIMUM EFFICIENCY Brocade VCS Fabric technology provides the foundation for a flexible and responsive network infrastructure while delivering maximum efficiency.

Optimized East-West Traffic Traditional data centers are architected with a rigid, three-tier tree topology, optimized for a client-server computing environment in which traffic travels north to south. This compromises performance, increases latency, and creates bottlenecks. With the increased prevalence of virtualization and distributed applications, data center network traffic is now predominantly east-west or server-server. The Brocade VCS fabric was specifically designed and optimized to address these traffic patterns by moving traffic through any of the active paths and avoiding the multiple hops required in other tiered topologies.

Multiple Load-Balanced Paths at Layers 1–3 Brocade VCS Fabric technology enables highly elastic domains with extremely efficient load balancing in Layers 1–3. Innovative Brocade ISL Trunking load balances traffic across all the links in a trunk for improved performance at Layer 1. In Layer 2, Equal Cost Multi-Path (ECMP) uses all available network bandwidth, allowing all links to be fully active and utilized. In the event of a failure, traffic is automatically routed to the closest path, providing higher resilience and greater application uptime. In Layer 3, the fabric automatically load balances all flows among a number of Layer 3 instances that collectively act as a single Layer 3 gateway. Multilayer multipathing helps improve network utilization, reduce latency, and increase overall network performance. Read the white paper Setting a New Standard for Network Efficiency with VCS Fabric Multilayer Multipathing Capabilities to learn more.

Optimized for Virtualization Brocade VCS Fabric technology offers unique features to support virtualized server and storage environments (see Figure 2), including:

• Zero-touch VM discovery: Brocade VM-Aware Network Automation eliminates the manual configuration of port profiles when a VM is added to the fabric or moved, providing an additional level of automation. The VCS fabric directly communicates with VMware vCenter, automatically downloading all port profile information and the associated MAC address, and distributes the VM-specific information to all switches within the fabric. When the VM moves, no additional configuration is required.

• Automatic Migration of Port Profiles: During a VM migration, network switch ports must be dynamically configured to ensure that the VM traffic experiences consistent policies and configurations. The Brocade Automatic Migration of Port Profiles (AMPP) feature enables a seamless migration, since the VCS fabric is aware of port profiles and automatically tracks them as they move. Implemented in a hypervisor-agnostic manner, port profiles and MAC address mapping are created on any switch in the fabric. This mapping provides the logical flow for traffic from the source port to the destination port. As a VM migrates, the destination port in the fabric learns of the MAC address move and automatically activates the port profile configuration within a single fabric or across separate fabrics.

PROACTIVE MONITORING Brocade Fabric Watch is an innovative switch health monitoring feature available on the Brocade VDX 6720. Fabric Watch monitors the health of certain switch components and, based on the threshold set, declares each component as marginal or down.

EASE OF USE AUGMENTED BY BROCADE NETWORK ADVISOR Brocade Network Advisor is an easy-to-use network management platform for advanced management of Brocade VCS fabrics and Brocade VDX switches across the entire network lifecycle. Organizations

can use Brocade Network Advisor to manage a VCS fabric as a single entity or to drill down to individual Brocade VDX switches for fault, inventory, or performance management—and to manage multiple VCS fabrics in parallel.

Brocade Network Advisor also provides simplified management of AMPP configurations, and integrity checks can be performed across physical Brocade VDX configurations, either in the same fabric or across different VCS fabrics. In addition, Brocade Network Advisor enables VM-level monitoring and can help identify top-talker applications leveraging sFlow across the fabric. Finally, Brocade Network Advisor provides VCS fabric diagnostics, including visualization of VCS fabric traffic paths and network latency monitoring that enables fault isolation via hop-by-hop inspection. For details, visit www.brocade.com/management.

BROCADE GLOBAL SERVICES Brocade Global Services has the expertise to help organizations build scalable, efficient cloud infrastructures. Leveraging 15 years of expertise in storage, networking, and virtualization, Brocade Global Services delivers world-class professional services, technical support, and education services, enabling organizations to maximize their Brocade investments, accelerate new technology deployments, and optimize the performance of networking infrastructures.

AFFORDABLE ACQUISITION OPTIONSBrocade Capital Solutions helps organizations easily address their IT requirements by offering flexible network acquisition and support alternatives. Organizations can select from purchase, lease, Brocade Network Subscription, and Brocade Subscription Plus options to align network acquisition with their unique capital requirements and risk profiles. To learn more, visit www.Brocade.com/CapitalSolutions.

MAXIMIZING INVESTMENTSTo help optimize technology investments, Brocade and its partners offer complete solutions that include professional services, technical support, and education. For more information, contact a Brocade sales partner or visit www.brocade.com.

Brocade VDX 6720-24 Brocade VDX 6720-60Switching bandwidth (data rate, full duplex) 480 Gbps 1,200 GbpsPort-to-port latency 600 nanoseconds within 10-port group 600 nanoseconds within 10-port groupForm factor 1U 2UDimensions and weight Width: 42.88 cm (16.88 in.)

Height: 4.32 cm (1.70 in.)

Depth: 38.10 cm (15.00 in.)

Weight: 7.30 kg (16.10 lb)

Width: 42.88 cm (16.88 in.)

Height: 8.89 cm (3.50 in.)

Depth: 43.18 cm (17.00 in.)

Weight: 15.88 kg (35.00 lb)1/10 GbE SFP+ ports 24 60Ports on Demand (PoD) increments 16, 24 40, 50, 60Power supplies Two hot-swappable, load-sharing Two hot-swappable, load-sharingCooling fans N+1 redundant, integrated into power supplies N+1 redundant, three hot-swappable fan units

BROCADE VDX 6720 FEATURE OVERVIEW

Scalability Information*

Connector options 1 GbE copper SFP options

1000Base-SX and 1000Base-LX

10 Gbps SFP+ options: 1/3/5 m direct-attached copper (Twinax)

10 GbE SR and 10 GbE LR

Out-of-band Ethernet management: RJ-45 (fixed)

Remote lights-out management: 10/100/1000 BaseT Ethernet

Console management: RJ45 to RS-232 (fixed)

Firmware and diagnostic: USBMaximum VLANs 4,096Maximum MAC addresses 32,000Maximum port profiles (AMPP) 256Maximum Layer 2 multicast groups 2,000Maximum Spanning Tree instances 32Maximum per-port priority pause level 8Maximum LAG groups in a VCS fabric 512Maximum members in a standard LAG 16Maximum MAC addresses in a VCS fabric 30,000Maximum switches in a VCS fabric 32Maximum ECMP paths in a VCS fabric 8Maximum trunk members for VCS fabric ports 8Maximum switches across which a vLAG can span 4Maximum members in a vLAG 32Maximum jumbo frame size 9,208 bytesQueues per port 8DCB Priority Flow Control (PFC) classes 8Maximum Layer 2 ACLs 1,000Maximum Layer 3 ACLs 1,000Maximum ARP entries 12,000Maximum IPv4 routes 2,000Operating system Brocade Network OS 4.1.0†

Layer 2 switching features • MAC Learning and Aging• Static MAC Configuration• Link Aggregation Control Protocol (LACP)

IEEE 802.3ad/802.1AX• Virtual Local Area Networks (VLANs)• VLAN Encapsulation 802.1Q• Rapid Spanning Tree Protocol (RSTP) 802.1w• Multiple Spanning Tree Protocol (MSTP) 802.1s• Per-VLAN Spanning Tree (PVST+/PVRST+)

• Private VLAN (PVLAN) • STP PortFast and PortFast BPDU Guard• STP Root Guard• STP over VCS• Layer 2 Access Control Lists (ACLs)• Address Resolution Protocol (ARP) RFC 826• IGMP v1/v2 Snooping• Pause Frames 802.3x

Layer 3 switching features • DHCP Helper† • OSPF• Border Gateway Protocol (BGP)

• VRRP and VRRP-E support • Static routes

BROCADE VDX 6720 SPECIFICATIONS

* Please refer to the latest version of the release notes for the most up-to-date scalability numbers. † Brocade Network OS 4.1 is planned for release in 1H2014. Please refer to the current version of the release notes for the most up-to-date feature support.

† Brocade Network OS 4.1 is planned for release in 1H2014. Please refer to the current version of the release notes for the most up-to-date feature support.

Brocade VCS Fabric technology features • Automatic Fabric Formation• Distributed Fabric Services• Transparent LAN Services• Virtual Link Aggregation Group (vLAG) spanning

multiple physical switches• Switch Beaconing• Distributed Configuration Management

• Transparent Interconnection of Lots of Links (TRILL)

• DHCP Option 66/67†

• Equal Cost Multi-Path (ECMP)• Automatic Migration of Port Profiles (AMPP)• VM-Aware Network Automation

DCB features • Priority-based Flow Control (PFC) 802.1Qbb• Enhanced Transmission Selection (ETS)

802.1Qaz

• Data Center Bridging eXchange (DCBX)• DCBX Application Type-Length-Value (TLV) for

FCoE and iSCSI FCoE features (Requires FCoE license)

• Multihop Fibre Channel over Ethernet (FCoE); requires Brocade VCS Fabric technology

• FC-BB5 compliant Fibre Channel Forwarder (FCF)• Native FCoE forwarding• End-to-end FCoE (initiator to target)

• FCoE Initialization Protocol (FIP) v1 support for FCoE device login and initialization

• Name Server-based zoning• Supports connectivity to FIP Snooping Bridge

(FSB) device

Quality of Service (QoS) • Eight priority levels for QoS• Class of Service (CoS) IEEE 802.1p• DSCP Trust• DSCP to Traffic Class Mutation• Random Early Discard

• Per-port QoS configuration• Scheduling: Strict Priority (SP), Shaped Deficit

Weighted Round-Robin (SDWRR) - DSCP to CoS Mutation - DSCP to DSCP Mutation

Switch health monitoring • Fabric Watch monitoring and notification

ManagementManagement and control • IPv4/IPv6 management

• Industry-standard Command Line Interface (CLI)• Netconf API• Brocade VCS Plugin for OpenStack• Remote lights out management (future update)• In-band management (standalone mode)• Link Layer Discovery Protocol (LLDP) IEEE

802.1AB• Logical chassis management• MIB II RFC 1213 MIB

• Switch Beaconing • Switched Port Analyzer (SPAN) • Telnet• SNMP v1, v2C, v3• sFlow RFC 3176• Out-of-band management • RMON-1, RMON-2• NTP• Management Access Control Lists (ACLs)• Role-Based Access Control (RBAC)

Security • Port-based Network Access Control 802.1X• RADIUS• TACACS+• Secure Shell (SSHv2)• BPDU Drop• Lightweight Directory Access Protocol (LDAP)• Secure Copy Protocol

MechanicalEnclosure Front-to-rear, rear-to-front airflow; 1U, 19-inch EIA-compliant; power from non-port side

EnvironmentalTemperature Operating: 0°C to 40°C (32°F to 104°F)

Non-operating and storage: −25°C to 70°C (−13°F to 158°F)Humidity Operating: 10% to 85% non-condensing

Non-operating and storage: 10% to 90% non-condensingAltitude Operating: Up to 3,000 meters (9,842 feet)

Non-operating and storage: Up to 12 kilometers (39,370 feet)Shock Operating: 20 g, 6 ms half-sine

Non-operating and storage: Half-sine, 33 g 11 ms, 3/eg AxisVibration Operating: 0.5 g sine, 0.4 grms random, 5 to 500 Hz

Non-operating and storage: 2.0 g sine, 1.1 grms random, 5 to 500 HzAirflow Brocade VDX 6720-24

Maximum: 53 CFM Nominal: 35 CFM

Brocade VDX 6720-60 Maximum: 115 CFM Nominal: 76 CFM

Heat dissipation 450 BTU/hr (24-port switch); 1,126 BTU/hr (60-port switch)

PowerPower supplies Two internal, redundant, field-replaceable, load-sharing AC power suppliesPower inlet C13Input voltage 85 to 256 VAC nominalInput line frequency 47 to 63 HzInrush current 50 amps maxMaximum current 3.5 amps max (24-port switch); 7 amps max (60-port switch)Maximum power consumption 132 watts (24-port switch); 330 watts (60-port switch)

Safety Compliance• Bi-Nat UL/CSA 60950-1 Second Edition• CAN/CSA-C22.2 No. 60950-1 Second Edition• EN 60950-1 Second Edition• IEC 60950-1 Second Edition• GB4943-2001 and GB9254-1998• CNS 14336(94)

EMC• FCC Class A • ICES A • VCCI-Class A • CE • C• BSMI• GOST• KC Class A• CCC

Immunity• ANSI C63.4• ICES-003 Class A• CISPR22 and JEIDA (Harmonics)• EN55022 Class A and EN55024• CISPR22 • AS/NZS CISPR22• CNS 13438(95) • 51318.22-99 and 51318.24-99 • KN22 and KN24• GB17625.1-2003

Environmental Regulatory Compliance• RoHS-6 (with lead exemption) Directive 2002/95/EC

Standards ComplianceThe Brocade VDX 6720 products conform to the following Ethernet standards: • IEEE 802.1D Spanning Tree Protocol • IEEE 802.1s Multiple Spanning Tree • IEEE 802.1w Rapid reconfiguration of Spanning Tree Protocol • IEEE 802.3ad Link Aggregation with LACP • IEEE 802.3ae 10G Ethernet • IEEE 802.1Q VLAN Tagging • IEEE 802.1p Class of Service Prioritization and Tagging • IEEE 802.1v VLAN Classification by Protocol and Port • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) • IEEE 802.3x Flow Control (Pause Frames)• IEEE 802.3ab 1000BASE-T• IEEE 802.3z 1000BASE-XThe following draft versions of the Data Center Bridging (DCB) and Fibre Channel over Ethernet (FCoE) standards are also supported on the Brocade VDX 6720: • IEEE 802.1Qbb Priority-based Flow Control • IEEE 802.1Qaz Enhanced Transmission Selection • IEEE 802.1 DCB Capability Exchange Protocol (Proposed under the DCB Task Group of IEEE 802.1 Working Group) • FC-BB-5 FCoE (Rev 2.0)

BROCADE VDX 6720 SPECIFICATIONS (CONTINUED)

RFC Support RFC 768 User Datagram Protocol (UDP)RFC 783 TFTP Protocol (revision 2)RFC 791 Internet Protocol (IP)RFC 792 Internet Control Message Protocol (ICMP)RFC 793 Transmission Control Protocol (TCP)RFC 826 ARPRFC 854 Telnet Protocol Specification RFC 894 A Standard for the Transmission of IP Datagram over Ethernet NetworksRFC 1027 Using ARP to Implement Transparent Subnet Gateways (Proxy ARP)RFC 1112 IGMP v1RFC 1157 Simple Network Management Protocol (SNMP) v1 and v2RFC 1492 TACACS+RFC 1519 Classless Interdomain Routing (CIDR)RFC 1584 Multicast Extensions to OSPF RFC 1765 OSPF Database OverflowRFC 1812 Requirements for IP Version 4 RoutersRFC 2068 HTTP ServerRFC 2131 Dynamic Host Configuration Protocol (DHCP)RFC 2154 OSPF with Digital Signatures (Password, MD-5)RFC 2236 IGMP v2RFC 2267 Network Ingress FilteringRFC 2328 OSPF v2 (edge mode)RFC 3768 VRRPRFC 2370 OSPF Opaque Link-State Advertisement (LSA) Option—Partial SupportRFC 2474 Definition of the Differentiated Services Field in the IPv4 and IPv6 HeadersRFC 2571 An Architecture for Describing SNMP Management FrameworksRFC 2865 Remote Authentication Dial In User Service (RADIUS) RFC 3101 The OSPF Not-So-Stubby Area (NSSA) OptionRFC 3176 sFlowRFC 3137 OSPF Stub Router AdvertisementRFC 4510 Lightweight Directory Access Protocol (LDAP): Technical Specification Road MapRFC 4292 IP Forwarding MIBRFC 4293 Management Information Base for the Internet Protocol (IP)RFC 3411 An Architecture for Describing SNMP FrameworksRFC 3412 Message Processing and Dispatching for the SNMPRFC 3413 Simple Network Management Protocol (SNMP) ApplicationsRFC 2460 Internet Protocol, Version 6 (v6) Specification (on management interface )RFC 2464 Transmission of IPv6 Packets over Ethernet Networks (on management interface)RFC 2474 Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers (only for IPv4)

DATA SHEET www.brocade.com

© 2013 Brocade Communications Systems, Inc. All Rights Reserved. 08/13 GA-DS-1524-08

ADX, AnyIO, Brocade, Brocade Assurance, the B-wing symbol, DCX, Fabric OS, ICX, MLX, MyBrocade, OpenScript, VCS, VDX, and Vyatta are registered trademarks, and HyperEdge, The Effortless Network, and The On-Demand Data Center are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service names mentioned may be trademarks of their respective owners.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without notice, and assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocade sales office for information on feature and product availability. Export of technical data contained in this document may require an export license from the United States government.

Corporate Headquarters San Jose, CA USAT: +1-408-333-8000info@brocade.com

European Headquarters Geneva, SwitzerlandT: +41-22-799-56-40 emea-info@brocade.com

Asia Pacific Headquarters SingaporeT: +65-6538-4700 apac-info@brocade.com

SKU Description CommentsBR-VDX6720-16-F Brocade VDX 6720, 16P SFP+, AC, non-port side exhaust airflow Base SKUBR-VDX6720-16-R Brocade VDX 6720, 16P SFP+, AC, port side exhaust airflow Base SKUBR-VDX6720-24-F Brocade VDX 6720, 24P SFP+, AC, non-port side exhaust airflow Base SKUBR-VDX6720-24-R Brocade VDX 6720, 24P SFP+, AC, port side exhaust airflow Base SKUBR-VDX6720-40-F Brocade VDX 6720, 40P SFP+, AC, non-port side exhaust airflow Base SKUBR-VDX6720-40-R Brocade VDX 6720, 40P SFP+, AC, port side exhaust airflow Base SKUBR-VDX6720-60-F Brocade VDX 6720, 60P SFP+, AC, non-port side exhaust airflow Base SKUBR-VDX6720-60-R Brocade VDX 6720, 60P SFP+, AC, port side exhaust airflow Base SKUBR-VDX6720-24POD-01 8-port PoD license for Brocade VDX 6720-32 Software orderableBR-VDX6720-60POD-01 10-port PoD license for Brocade VDX 6720-76 Software orderableBR-VDX6720-24VCS-01 VCS software license for Brocade VDX 6720-16, Brocade VDX 6720-24 Software orderableBR-VDX6720-60VCS-01 VCS software license for Brocade VDX 6720-40, Brocade VDX 6720-60 Software orderableXBR-250WPSAC-F FRU 250 W AC power supply/fan, non-port side exhaust airflow FRUBR-VDX 6720-24FCOE-01 FCoE software license for 16- and 24-port SKU Software orderableBR-VDX 6720-60FCOE-01 FCoE software license for 40- and 60-port SKU Software orderableXBR-250WPSAC-R FRU 250 W AC power supply/fan, port side exhaust airflow FRUXBR-250WPSAC-F FRU 250 W AC power supply/fan, non-port side exhaust airflow FRUXBR-500WPSAC-R FRU 500 W AC power supply, port side exhaust airflow FRUXBR-500WPSAC-F FRU 500 W AC power supply, non-port side exhaust airflow FRUXBR-FAN-80-F FRU fan, 80 mm, non-port side exhaust airflow FRUXBR-FAN-80-R FRU fan, 80 mm, port side exhaust airflow FRUXBR-000190 (1-pack) 1 GbE copper OpticsE1MG-SX-OM (1-pack) E1MG-SX-OM-8 (8-pack)

1000Base-SX Optics

E1MG-LX-OM (1-pack) E1MG-LX-OM-8 (8-pack)

1000Base-LX Optics

10G-SFPP-SR (1-pack) 10G-SFPP-SR-8 (8-pack)

10 Gbps SR Optics

10G-SFPP-LR (1-pack) 10G-SFPP-LR-8 (8-pack)

10 Gbps LR Optics

10G-SFPP-TWX-0101 (1-pack) 10G-SFPP-TWX-0108 (8-pack)

1 m Twinax copper cable Optics

10G-SFPP-TWX-0301 (1-pack) 10G-SFPP-TWX-0308 (8-pack)

3 m Twinax copper cable Optics

10G-SFPP-TWX-0501 (1-pack) 10G-SFPP-TWX-0508 (8-pack)

5 m Twinax copper cable Optics

BROCADE VDX 6720 ORDERING INFORMATION