Darkstorm's Book of Anarchy 2

7/27/2019 Darkstorm's Book of Anarchy 2

1/79

DarkStorm'sBookof

Compiled Articles onDestruction, Crime,

andOther Illegal Acts

"Are You Ready For A Good Time?"

Version II.IX May 1991

Page i

Pretext:


2/79

The author and co-authors of this document, and authors ofthe enclosed articles take absolutely no responsibilyity for theactions taken by the readers of this file. The readers areassumed to be of whole mind and competancy, so as not to warrantthe punishment of anyone for committing any act herein described.

This file was composed as a documentary article, and in noway reflects the author's views on law enforcement, its officers,or its purpose. This article is an informative look at the otherside. The readers do not have to nor are expected to take part inany of the acts herein described.

Inside this file one will find many detailed descriptions onhow to get anything you ever wanted for free, how to make otherspay for your goodies, how to destroy any thing and anyone atwill, and how to reek havoc upon the populus. The author does notcondone this sort of action, and suggests that those who reallywant to do this should read no further, and go see a doctor.Those who shun the thought of my even compiling this file shouldstop fucking reading this and delete it, since it won't do wellsitting next to all your other pristine files on how to trackhackers, and how to protect yourself from setting eyes uponpornography(*).

I hereby denounce this article and have decided to delete itfrom my drive, hopefully before I get the urge to upload it tothe unsuspecting populus. Those concerned with my actions, rest

your eyes, type: DEL DARK19-?.TXT at the DOS prompt, and getsome sleep.

Now that those assholes are gone, everyone else come back,all others should read on(including the guys I told to see adoctor). Enjoy this documentation, it is the result of manysleepless nights, many hours of downloading, buffering, and CHATsto get the necessary information for you all. By the time youread this I will probably have about 40-60k more of texts to addto the file, as I have sitting in front of me a few articles onjailbreak, car theft, atombombs (definition--from 'porno-graphos'Greek or something for 'the writing of the prostitutes'. Nicewriting I assume.(@) There are some articles on phreaking here, but I havemore....Page ii

Pretext-------(cont.)

Read the articles carefully on phreaking and on hacking, it


3/79

is important that you do not get caught trying out any of thesethings. There are some non-hacker/pirate articles here, such asthe noise filter to rid yourself of linenoise forever, but I feltit was important to the hacker, and even to the amatuer.

Most all of the articles enclosed can be done with littleexpended money, some more than others. The only articles that donot say how to build them, such as the HBO decoder and the RADARjammer are stored as .ZIP files in the DRKSTRM?.ZIP. These arefor you to read, and decide whether or not you want to spend themoney to get them. I would assume that the guys have been shutdown, so I have been looking for a replacement for the RADAR text(I already have a couple of HBO texts on how to make em.)

The only other stuff in here that claims to tell how tobuild something that doesn't is the couple of articles on BlueBoxing, (#'s 1-3), they are VERY informative to the newcomer, andI left them ther for the reading, besides, the texts on how tobuild the Pearl Box and a bunch of others will allow you to makethe Blue Box tones. Some of my own advice for you: Make the GoldBox, NEVER EVER make a Blotto Box, unless you wish to get alawsuit shoved so far up your asshole that you'll be tasting itin your mouth for years to come. And unless you're extrememelydemented, don't make a Urine Box.

I am looking for the file "Jane's All The World's Boxes", ifanyone has it, please upload it to any BBS I'm on, I would like

to include it in my next issue of DRKSTRM. It has many many moreboxes that are not listed here, nor anywhere else to myknowledge. (To the authors of Jane's ATWB, I only plan to use afew of the better ones, I will not include it all.) [Stilllooking....]

The HBO file on page 123 works great. I use it now, and it'sfine.

Also, if you have any intention of doing anything mentionedin this documnet, read the articles on it carefully. As in theinstance of the two Carding texts, the first says how to do it,but yet, if you read the second one, you will realize that hadyou tried it now, you would probably be sitting in a dingy cellwith a big Samoan named Biff who wants to make you his wife.

Go nuts!Have a Hell of a time!

Page iii

Table of Contents----- -- --------

Subject: Page(s):

------- -------

Pretext................................................ii-iiiTable of Contents......................................iv-viSpecial Thanks To:.......................................viiPreaking and Hacking:

Bell Trashing.......................................1-2Blue Boxing.........................................3-5Better Homes and Blue Boxing File #1................6-8Better Homes and Blue Boxing File #2................9-15


4/79

Better Homes and Blue Boxing File #3...............16-20Red Boxing...........................................21Hacker's Atlas (By: The Wyvern)....................22-26

How To Build Various Boxes:Noise Filters......................................27-29Neon Box.............................................30White Box..........................................31-32Black Box..........................................33-35Urine Box..........................................36-37Blotto Box.........................................38-40Beige Box..........................................41-44Aqua Box...........................................45-48Cheese Box File #1...................................49Cheese Box FIle #2...................................50Brown Box..........................................51-52Gold Box...........................................53-54Crimson Box........................................55-56Pearl Box..........................................57-58Silver Box.........................................59-61Red Box..............................................62Green Box............................................63

The Book of Unlawfuls (By: Shadowspawn):Section I -- Bombs.................................64-65Section II -- Hacking................................66

Lock Picking:Combination Locks..................................67-68Door Knobs....(2 Files)............................69-75Padlocks.............................................76

Weird Drugs.............................................77-78House Breaking............................................79Demolition Files (By: King Arthur):

Number 1...........................................80-81Number 2...........................................82-84

Page iv


(cont.)

Subject: Page(s):------- -------

Bombs + Chemicals:House-Hold Equivelences for Chemicals..............85-86

Misc. Compounds (By: The Prowler)..................87-88Black Powder.......................................89-90Fire Bombs, Napalm, etc............................91-92Nitrogylcerine.....................................93-94Misc. Demolitions, Flares, Fuels, etc.............95-101Moltov Cocktail.....................................102

The Anarchist's Micro-Cookbook (By: Maelstrom).........103-105Cars:

How to Hotwire a Car................................106How to Fuck one up..................................107


5/79

Terror/ism:Electronic Terrorism..............................108-110Harmless Terror...................................111-112

Carding:Carding Text #1...................................113-114New Info on Carding...............................115-119

Free Shit:Change..............................................120Postage...........................................121-122HBO.................................................123HBO Revised.........................................123bHBO + Free PAY TV.................................124-128Cable TV Hacking.................................128b-1283-Way Teleconferencing..............................129Horses..............................................130

Frequencies:Bugs, Taps, Mikes.................................131-132Federal Frequencies...............................133-136Code Words........................................137-138Common 10 Codes (ie; 10-4)..........................139Quick Notes on Frequencies..........................140

Info on Hacking/Pirate Groups:Information on Hacker Groups......................141-142Electronic Hacker Magazines.......................143-144

Printed Hacker/CU Magazines.......................145-146Misc. Catalogs on Crime/CU/Hacking etc............147-151

Page v


(cont.)

Subject: Page(s):

------- -------

Info on Haking/Pirate Groups: (cont.)Hacker BBS's etc....................................152The Butler's Disclaimer.............................153

Last Minute Additions:Excerpts from 'Steal This Book':

People's Chemistry...........................154-155Fuses..........................................156Coin/Bill Fraud..............................157-158Free Calls/Elimentary Red Boxing...............159

Enclosure Notes:Enclosed Hz-Generator and Misc. Texts...............160

One Final Note to All From DarkStorm................161


6/79

Page vi

Special Thanks To:-----------------

BAH, JDS, Andersen, Streak, Gunner, McCarthy, Flare,Starburst (AKA Mark Taverns), and Hayes.

\______Not his real name boys, a handle OK?He's insane, not Stupid.

An Extra Note of Thanks:-----------------------

To the United States of America, for allowing me the freedomof expression, that of speech, and that of the press, which thusgranted me the right to publish this article. (Sort of.)

{Not like I wouldn't have published it if it were illegal}But thanks anyway; it's the thought that counts.

One Last note (I Hope)----------------------

Most of the BBS numbers have been left attached to thefiles, that is, accept for the Police Station, which I think onlyappears once, but no matter, you can still call most of theseBBS's even if all their articles are not properly denoted.

You can find most of these articles, plus many more on anyof the BBS's mentioned in this file, and on many others not


7/79

mentioned here. Many good BBS's have message sections devoted toLaw and Lawlessness.

Oh Yeah-- ----

Almost forgot, this is a fairly good size article, so youmight want to use a Search program, or one with a Search (andreplace) key in it. Search in the forward direction from theTable of Contents for 'Page ###' and it will get you there fasterthan you can. In my next issue, or in a few at least, I willdivide it up a bit so you can load some of it, or discard orwhatever to make it better for you. (Did it this time....)

Page vii

The Book Of The UnlawfulsBy: Shadowspawn

The Police Station

612-934-4880

-=] Section I [=--=] Bombs [=---- ----- ---

House Hold equivalants----- ---- -----------

Name Equivalant---- ----------acetic acid vinegar

aluminum oxide alumiaaluminum potassium sulfate alumaluminum sulfate alumammonium hydroxide ammoniacarbon carbonate chalkcarbon tetrachloride cleaning fluidcalcium hypochloride bleaching powdercalcium oxide limecalcium sulfate plaster of pariscarbonic acid seltzerethylene dichloride dutch fluidferric oxide iron rustglucose corn syrup

graphite pencil leadhydrochloric acid muriatic acidhydrogen peroxide peroxidelead acetate sugar of leadlead tetrooxide red leadmagesium silicate talcmagesium sulfate Epsom saltsnaphthalene mothballsphenol carbolic acidpotassium bicarbonate cream of tarter


8/79

potassium chromium sulfate chrome alumpotassium nitrate saltpetersodium dioxide sandsodium bicarbonate baking sodasodium borate boraxsodium carbonate washing sodasodium choride saltsodium hydroxide lyesodium silicate water glass

Page 64

sodium sulfate glaubers' saltsodium thiosulfate photographers hyposulferic acid battery acidsucrose cane sugarzinc choride tinner's fluid------------ --------------

-=] Smoke Bomb [=---- ----- ---- ---

Mix:4 parts sugar6 parts potassium nitrate

Heat:over low flame till melts stir well, then pour into container.Before it soldifies, put a few matches in for fuses.

*One pound of this stuff will fill a block nicely with a thickcloud of white smoke*

-=] Generic bomb [=---- ------- ---- ---

1) Aquire a glass container2) Put in a few drops of gasoline3) Cap the top4) Now turn the container around to coat the inner surfaces andthen evaporates5) Add a few drops of potassium permanganate (


9/79

Page 65

-=] Section II [=--=] Hacking [=---- ------- ---

-=] Conferance calls [=---- ---------- ----- ---

*I recomend that you do this local*

To make a conference call with as many people you want, just callthe operator ("0") and say "Hello, I'd like to make a conferencecall."Then give the (first) Names (not pirate names, ether) and thephone #'s of the people you want to call And she'll do it.(hint:make sure that the people you are callin are expecting it.

because its damn annoying to be talking to 3 people and havingthe third be busy for the whole time

-=] Charge-a-call phones [=---- ------------- ------ ---

On a charge-a-call phone (there blue but dont have any coinslots) take a hex wrench (with a hole in the middle) and removethe screw in the middle for an extention!

-=] Free calls [=---- ---- ----- ---

From a pay phone, (the kind that gives you a dial tone AFTER youput in the dime) and drop in your dime. Then dial the #, thenput another dime in! It'll come back out when you finish yourcall.

{What!?!?! Some one tell me if he's serious!}

Page 66


10/79

[ Utopia Bbs: (213) 556-8629 ]

{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=} {=--=}{=--=} Picking Combination Locks {=--=}{=--=} {=--=}{=--=} Written by: The Byte Byter {=--=}{=--=} {=--=}{=--=} The writer of this text file takes resp- {=--=}{=--=} onsibility for what this text file is used for.{=--=}{=--=} Hopefully it will only be used for illegal pur-{=--=}{=--=} poses cuz i can't think of a reason it can be {=--=}{=--=} used for legally. Well, on with the text file. {=--=}{=--=} {=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}

Ok, so ya say ya wanna learn how to pick combination

locks...This text file should help you. As a matter of fact, ifya do it right, it will help you. First of all, let me tell youabout the set-up of a lock. When the lock is locked, there is acurved piece of metal wedged inside the little notch on thehorseshoe shaped bar that is pushed in to the lock when you lockit.To free this wedge, you must(must is a word used to much) youusually(that sounds much better) have to turn the lock to thedesired combination and the pressure on the wedge is releasedtherefore letting the lock open. I will now tell you how to makea pick so you can open a lock without having to waste all thattime turning the combination (this also helps when ya don't knowthe combination to begin with). First of all, ya need to find a

hairpin. What's a hairpin? Well, just ask your mom. She willhave one. If she asks what its for, say ya gotta hold somethingtogether... If she says use a rubberband or use a paperclip,tell her to Fuck Off and Die and then go to the store and rip offa box of 50 or so.Ok, enough stalling (yea, i was stalling). Once you have yourhair pin (make sure its metal), take the ridged side and break itoff right before it starts to make a U-turn onto the straightside. The curved part can now be used as a handle. Now, using afile, file down the other end until it is fairly thin. Youshould do this to many hairpins and file them so they are ofdifferent thicknesses so you can pick various locks. Some locksare so cheap that ya don't even have ta file! But most are not.

Ok, now you have a lock pick. Now if ya haven't figured it out,here's how ya use it.Page 67

You look at a lock to see which side the lock opens from. If youcan't tell, you will just have to try both sides. When ya findout what side it opens from, take the lock pick and stick thefiled end into the inside of the horseshoe-shaped bar onwhichever side the lock opens from. Now, put pressure on the


11/79

handle of the lock pick (pushing down, into the crack) and pullthe lock up and down. The lock will then open because the pickseparated the wedge and the notch allowing us thieves to open it.

Don't say bullshit until you've tried it. because i have gottenlots of beer money from doin' this to fellow students'gym lockers. Also, this technique works best on American locks.I have never picked a Master lock before because of the shape apressure of the wedge but if anyone does it, let me know how longit took. Also, the Master lock casing is very tight so ya can'tget the pick in. So, if you're locking something valuable up,use a Master, cuz at least ya know I won't be picking it and I'msure there aren't that many that could. And when i say pick, idon't mean lighting a stick of dynamite next to the lock, pickingis opening a lock without using force, making a substitute key,etc... If any of you believe that this information is notsufficient for picking an American lock, or any other kindbesides Master, leave me a message at

/\/\etalland 1 (503) 538-0761.

This concludes my text file on picking combination locks.My next text file will probably be "Picking key locks".

See ya later.

The Byte Byter^^^ ^^^^ ^^^^^||| |||| |||||^^^ ^^^^ ^^^^^^^^ ^^^^ ^^^^^^^^ ^^^^ ^^^^^''' '''' '''''

Page 68

This text file was written on 06/21/85.

][][][][][][][][][][][][][][][][][][][][][ BROUGHT TO YOU BY ][][ COMPUTER PIRATES OF UTAH ][][ COURTESY OF THE SAFEHOUSE ][ Ya it's in all CAPS.][ (801)-264-8201 ][ I got sick of trans-][][][][][][][][][][][][][][][][][][][][ lating.


12/79

[+][+][+][+][+][+][+][+][+][+][+][+][+] I did put it to 80[+] [+] columns though, 'stead[+] L O C K P I C K I N G [+] of the lame 40 columns[+] [+] which takes up too much[+][+][+][+][+][+][+][+][+][+][+][+][+] paper when printed and[+] [+] read.[+] WRITTEN BY: DARC DEATHE [+] -=+ DarkStorm +=-[+] [+][+][+][+][+][+][+][+][+][+][+][+][+][+]

THIS TUTORIAL WILL DEMONSTRATE HOW TO "PICK" A PIN TUMBLER LOCK.USE OF THIS MATERIAL IS FOR LOCKSMITHS ONLY, ANYUSE OF THIS INFORMATION FOR ILLEGAL PURPOSES IS FORBIDDEN ANDAGAINST THE LAW. (AS LONG AS WE ARE AT IT, DO YOUWANT TO BUY SOME LAND IN FLORIDA?) IN ORDER TO PICK A PIN TUMBLERLOCK, YOU WILL REQUIRE FOUR ITEMS:A LOCK,YOU,A PICK,AND A TENSION WRENCH.

YOU CAN USSUALLY GET THESE AT A LOCKSMITH STORE, IF YOU CAN NOTFIND ONE NEAR YOU THERE WILL BE AN ADDRESS AT THE END OFTHE ARTICLE THAT YOU CAN ORDER THEM FROM. HERE IS AN ILLUSTRATIONOF A PICK AND A TENSION WRENCH:

________/ !________PICK TENSION WRENCH

MOST PEOPLE KNOW OF THE NEED FOR THE PICK, BUT HAVE NO IDEA WHATTHE WRENCH IS FOR. IT IS VERY IMPORTANT AND WITHOUT IT IT WOULDBE IMPOSSIBLE TO PICK A LOCK.

Page 69

IN ORDER TO PICK A LOCK, WE MUST COUNT UPON THE IMPERFECTION OFTHE LOCK. BEFORE WE LOOK AT HOW TO ACTUALLY PICKTHE LOCK, WE WILL LOOK AT THE PARTS OF IT AND HOW THEIMPERFECTION PART FITS IN. HERE IS A DISSASSEMBLED LOCK:

/ / / /\ \ \ \

SPRINGS -> / / / /\ \ \ \_ _ _ _

! ! ! ! ! ! ! !! ! ! ! ! ! ! !

DRIVERS ->! ! ! ! ! ! ! !!_! !_! !_! !_!

_ _! ! _ ! !


13/79

BOTTOM PINS ->! ! ! ! _ ! !! ! ! ! ! ! ! !\_/ \_/ \_/ \_/

_____________________! : : : : : : : : !

HOUSING ->! : : : : : : : : !! : : : : : : : : !!___: :_: :_: :_: :___!

! : : : : : : : : !PLUG ->! : : : : : : : : !

!______________________!! !! !! !!_____________________!

___/ \

! !__ _ _! \__ / \_/ \__! \/ \\__/-------------------


14/79

THE THINNEST AND HAS ALMOST NO PRESSURE ON IT. WE NOW USE THEPICK TO >GENTLY< PUSH EACH PIN UP (AND TRY TO FEEL ITWHEN YOU LET IT DOWN) UNTIL WE FIND WHICH IS THE TIGHTEST ON ANDWHICH IS LOOSEST. GETTING THE FEEL FOR THIS IS THE HARDEST PARTOF LOCK PICKING. NOW THAT YOU HAVE FOUND THE LOOSEST ONE,GENTLY PRESS IT UPWARD UNTIL YOU FEEL A SLIGHT REDUCTION INTENSION ON THE TENSION WRENCH. THIS WILL HAPPEN WHENTHE TOP OF THE BOTTOM PIN BECOMES EVEN WITH THE JUNCTION OF THEPLUG AND THE HOUSING. DO NOT RELEASE ANY TENSION FROM THE WRENCHNOW! THE DRIVER WILL NOW BE TRAPPED IN THE HOUSING ASILLUSTRATED HERE: (DON'T I DRAW PRETTY)

! !*! !HOUSING ! !*! !

! !*! !___________! !_! !__________________________ ___________

! !*! !PLUG ! !*! !

! \_/ !! !

NOW YOU CONTINUE THIS PROCESS WITH EACH OF THE PINS UNTIL YOUWORK YOUR WAY UP TO THE ONE THAT IS WIDEST. WITH SOME

PRACTICE YOU CAN GET FAIRLY FAST AT THIS. I SUGGEST PRACTICING ONA FOUR PIN TUMBLER LOCK THAT IS BOUGHT FROM A HARDWARE STORE, THECHEAPER THE BETTER.Page 71

I WOULD LIKE TO DISCUSS A PATICULAR CONFIGURATION OF THE PINS NOWTHAT MAY PRESENT A PARTICULARLY HARD JOB TO PICK. THIS ISGRAPHICLY SHOWN HERE BY THE TWO MIDDLE PINS:

!*! !*! !*! !*!!*! !*! !_! !*!!*! !*! _ !*!!_! !*! !*! !_!_ !*! !*! _!*! !*! !*! !*!!*! !_! !*! !*!

!*! _ !*! !*!!*! !*! !*! !*!\_/ \_/ \_/ \_/

\_______________

WHEN YOU TRY TO PUSH THE 2ND PIN FROM THE LEFT UP, YOU WILLUNAVOIDABLY BE PUSHING THE ONE IN FRONT OF IT UP BE-CAUSE OF IT'S LONG BOTTOM PIN. THE ONLY SOLUTION FOR THIS IS TOGET A SPECIAL PICK THAT LOOKS LIKE THIS:


15/79

\\ _______________\_/

THE MAJOR PROBLEM WITH THIS IS THAT IT IS HARD TO INITIALLYDETECT. THE REASON THAT IT MAKES IT HARDER IF IT IS NOTIMMEDIETLY APPERANT IS THAT YOU UnAVOIDABLY PUSH THE 3RD PIN FROMTHE LEFT UP INTO THE HOUSING, GETTING IT JAMMED:

! !*! !HOUSING ! !_! !

! _ !! !*! !

__________! !*! !___________________ !*! ________

!!*!!PLUG !!*!!

!\_/!

Page 72

I WOULD ALSO LIKE TO ADDRESS A TECHNIQUE CALLED RAKING. IT USESA TOOL LIKE THIS:

\/\/\/\___________

BASICLY YOU "RAKE" IT BACK AND FORTH ACROSS THE PINS, HOPING THATCOMBINED WITH THE TENSION IT WILL GIVE YOU THE RIGHT COMBINATION.THIS WAY HAS BEEN KNOWN: FAST SOMETIMES, BUT IS NOT VERYRELIABLE, AND I WOULD SUGGEST LEARNING TO ACTUALLY "PICK" THELOCK.

EARLIER I PROMISED AN ADDRESS TO ORDER LOCKSMITHING MATERIALSFROM, SO HERE IT IS:

Garrison Protective ElectronicsPO Box 128


16/79

Edited by : QuasimotoRe-Edited by : Dark StarRe-Hashed by : DarkStorm

Page 73

[ Utopia Bbs: (213) 556-8629 ]

]]]]]]]]]]#[[[[[[[[[[]] LOCK PICKING [[]] BY [[]] ^^^NIGHTWING^^^ [[]]]]]]]]]]#[[[[[[[[[[

SO YOU WANT TO BE A CRIMINAL. WELL, IF YOU ARE WANTING TO BE LIKEJAMES BOND AND OPEN A LOCK IN FIFTEEN SECONDS, GO TO HOLLYWOOD

BECAUSE THAT'S THE ONLY PLACE YOUR GONNA DO IT. EVEN EXPERIENCEDLOCKSMITHS CAN SPEND 5 TO 10 MINUTES ON A LOCK IF THEY'REUNLUCKY. IF YOU ARE LOOKING FOR EXTREMELY QUICK ACCESS,LOOK ELSEWHERE.

THE FOLLOWING INSTRUCTIONS WILL PERTAIN MOSTLY TO THE"LOCK-IN-KNOB" TYPE LOCK, SINCE IT IS THE EASIEST TO PICK. IFTHERE IS SUFFICIENT DEMAND, I WILL LATER WRITE A FILE DISCUSSINGTHE OTHER FORMS OF ENTRANCE, INCLUDING DEAD-BOLT FIRST OF ALL,YOU NEED A PICK SET. IF YOU KNOW A LOCKSMITH, GET HIM TO MAKE YOUA SET. THIS WILL BE THE BEST POSSIBLE SET FOR YOU TO USE. IF YOUFIND A LOCKSMITH WILLING TO SUPPLY A SET, DON'T GIVE UP HOPE. ITIS POSSIBLE TO MAKE YOUR OWN, IF YOU HAVE ACCESS TO A GRINDER

(YOU CAN USE A FILE, BUT IT TAKES FOREVER.)

THE THING YOU NEED IS AN ALLEN WRENCH SET (VERY SMALL). THESESHOULD BE SMALL ENOUGH TO FIT INTO THE KEYHOLE SLOT. NOW, BENDTHE LONG END OF THE ALLEN WRENCH AT A SLIGHT ANGLE..(NOT 90 DEG.)IT SHOULD LOOK SOMETHING LIKE THIS:#1

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ (THIS IS THE HANDLE


17/79

\\\ THAT WAS ALREADY\\\ (HERE.)\\\\\\\\\

NOW, TAKE YOUR PICK TO A GRINDER OR A FILE AND SMOOTH THE END(#1) UNTIL IT'S ROUNDED SO IT WON'T HANG INSIDE THE LOCK. TESTYOUR TOOL OUT ON DOORKNOBS AT YOUR HOUSE TO SEE IF IT WILL SLIDEIN AND OUT SMOOTHLY.Page 74

NOW, THIS IS WHERE THE SCREWDRIVER COMES IN. IS IT SMALL ENOUGHFOR IT AND YOUR PICK TO BE USED IN THE SAME LOCK AT THE SAMETIME, ONE ABOVE THE OTHER ?LETS HOPE SO, BECAUSE THAT'S THE ONLY WAY YOUR GONNA OPEN IT.

IN THE COMING INSTRUCTIONS, PLEASE REFER TO THIS CHART OF THEINTERIOR OF A LOCK:XXXXXXXXXXXXXXXXXXXXXXX| K# # # # # # | E

# # # # | Y

* * | H* * * * * * | O| L| E

XXXXXXXXXXXXXXXXXXXXXXX|#= UPPER TUMLER PIN*= LOWER TUMLER PINX= CYLINDER WALL

(THIS IS A GREATLY SIMPLIFIED DRAWING)THE OBJECT IS TO PRESS THE PIN UP SO THAT THE SPACE BETWEEN THE

UPPER PIN AND THE LOWER PIN IS LEVEL WITH THE CYLINDER WALL. NOW,IF YOU PUSH A PIN UP, ITS TENDANCY IS TO FALL BACK DOWN, RIGHT ?THAT IS WHERE THE SCREWDRIVER COMES IN.INSERT THE SCREWDRIVER INTO THE SLOT AND TURN. THIS TENSION WILLKEEP THE "SOLVED" PINS FROM FALLING BACK DOWN. NOW, WORK FROM THEBACK OF THE LOCK TO THE FRONT, AND WHEN YOU'RE THROUGH..... THEREWILL BE A CLICK, THE SCREWDRIVER WILL TURN FREELY, AND THE DOORWILL OPEN. DON'T GET DISCOURAGE ON YOUR FIRST TRY! IT WILLPROBABLY TAKE YOU ABOUT 20-30 MINUTES YOUR FIRST TIME. AFTER THATYOU WILL QUICKLY IMPROVE WITH PRACTICE.THIS IS BY NO MEANS THE MOST EFFICIENT WAY OF ENTERING A HOUSE.

IF YOU WOULD LIKE ANOTHER ITEM OR TWO DEVOTED TO THESE OTHERWAYS, LET THE SYSOP KNOW.


18/79

Page 75

Displaying LOCKPICK.DOC:+==========================================++ BE A LOCKPICK, GET INTO PADLOCKS ++ "HOW TO CRACK A PADLOCK" ++==========================================+

I must attribute this message/file to reading I have done fromanother files about this, and some methods that I have made up onmy own.

This method has been only assured with "Master" padlocks. Theyare a very common padlock.. This might only work on those, butwho knows..

First, pull the lock down, not so much as that it is impossibleto turn, but just enough to be able to do the following: Turn theknob around clockwise (to the right) until you feel a small,small resistance which will last 2-3 numbers on the dial long.You might try doing this a few times to find the exact number

that it does this on, and not to be mistaken with another. Now,add 5 to the number you have gotten. Guess what? You have thefirst number in the combonation!

There are a few mehods to get the next number. I will tell youboth, one method, is very quick, but not always 100% reliable.The other is very difficult.

QUICK METHOD: This method will get the last two numbers in thecombination in one step. --First, turn right and stop on thefirst number you got. Then, turn left and stop on the firstnumber again. Continue turning to the left to the next markednumber. This means that the dial goes by five, and if your firstnumber is 18, go to the 20.. Then turn to the dial to the rightagain, while pulling down on the lock (as hard as you pull to

unlock it if you have the right combo), and keep turning to theright until you get to the 2nd number you've tried. If it doesn'tunlock, go on to the next marked number on the dial. (Forinstance, you're first number is 18, you tried 20 past right, itdoesn't work, then try 25.) Keep doing this until eventually youunlock it, or it doesn't work. The most times that you would haveto do this is about 8.

HARD, BUT NEVER FAILS METHOD: As in above, turn right toyour first number, and then turn left until you get your firstnumber again. Begin pulling down on the lock again, and trying tofeel for a little resistance. If it is very stiff, you probablyhave the second number. If it is weak, then continue turning. Youshould try 2 or 3 times to make sure you get the same results.

After you think you've got the second number, turn back to theright, while pulling down on the lock between tries of oh, sayevery 3 numbers, and eventually, CLICK, it will open.

//=DISCLAIMER: I am not held responsible for the use of thisinformation. This is for, let's say, basic knowledge... Let'ssay, if you ever forget your combonation, or it is very importantyou get into another lock.This file/message has been brought to you by MASTER MICRO!Page 76


19/79

Wierd DrugsBy: Pa Bell

Bananas:

1. Obtain 15 pounds of ripe yellow bananas

2. Peel all and eat the fruit. Save the peelings

3. Scrape all the insides of the peels with a sharp knife.

4. Put all the scraped material in a large pot and add water.

5. Boil 3 or 4 hours until it has attained a solid pasteconsidtency.

6. Spread paste onto cookie sheets and dry in ofen for about 20minutes. This will result in fine black powder. Usually onewill feel the effects after smoking three to four cigarettes.

Cough syrup:

mix robitussion a-c with an equal amount of ginger ale and drink.The effects are sedation and euphoria. Never underestimate theeffects of any drug! You can OD on cough syrup!

Toads:

1. Collect five to ten toads, frogs will not work. The best kindare tree toads.

2. Kill them as painlessly as possible, and skin immediately.

3. Allow the skins to dry in a refrigerator for four to five

days, or until the skins are brittle.

4. Now crush the skins into powder and smoke. Due to its badtaste you can mix it with a more fragrent smoking medium.

Page 77

Nutmeg:1. Take several whole nutmegs and grind them up in an oldgrinder.


20/79

2. After the nutmegs are ground. Place in a mortar and pulverizewith a pestle.

3. The usual dosage is about 10 or 15 grams. A larger dose mayproduce excessive thirst,anxiety,and rapid heart beat, buthallucinations are rare.{Hallucinations maybe rare, but it does happen.}{PS- To get hallucinations you must eat something like 30g,

which is extremely close to a lethal dose. If you die from thisone, I didn't tell you to do it.}

Peanuts:

1. Take 1 pound of raw peanuts (not roasted)

2. Shell them, saving the skins and discarding the shells.

3. Eat the nuts.

4. Grind up the skins and smoke them.

Page 78

How to Break In to a HouseBy: Jim Meeker


21/79

Okay You Need:1. Tear Gas or Mace{Use the Mace from MISC.

COMPOUNDS}2. A BB/Pelet Gun

3. An Ice Pick4. Thick Gloves

What You Do Is:

1. Call the ###-#### of the house, or ring doorbell, To findout if they're home.

2. If they're not home then...

3. Jump over the fence or walk through gate (whatever).

4. If you see a dog give him the mace or tear gas.

5. Put the gloves on!!!!!!!

6. Shoot the BB gun slightly above the window locks.

7. Push the ice-pick through the hole (made by the BB gun).

8. Enter window.

9. FIRST...Find the LIVING ROOM. (they're neat things there!).

10. Then goto the Bed-room to get a pillow case. Put thegoodies in the pillow case.

11. Get out

Notes: You should have certian targets worked out (likecomputers, Radios, Ect.,Ect.). Also Steal

from your own neigborhood. If you think they have analarm....

Page 79

Demolition Article #1By: King Arthur

Like all chemists I must advise you all to take the greatestcare and caution when you are doing this. Even if you have madethis stuff before.

This first article will give you information on makingnitroglyerin, the basic ingredient in a lot of explosives such asstraight dynamites, and geletin dynamites.

---------------------------------------Making nitroglycerin---------------------------------------

1. Fill a 75-milliliter beaker to the 13 ml. Level withfuming red nitric acid, of 98% pure concentration.


22/79

2. Place the beaker in an ice bath and allow to cool belowroom temp.

3. After it has cooled, add to it three times the amount offuming sulferic acid (99% h2so4). In other words, add tothe now-cool fuming nitric acid 39 ml. Of fuming sulfericacid.When mixing any acids, always do it slowly and carefully

to avoid splattering.

4. When the two are mixed, lower thier temp. By adding moreice to the bath, about 10-15 degrees centigrade. (Use a

mercury-operated thermometer)

5. When the acid solution has cooled to the desiredtemperature, it is ready for the glycerin. The glycerinmust be added in small amounts using a medicine dropper.

(Read this step about 10 times!)Glycerin is added slowly and carefully (i mean careful!)Until the entire surface of the acid it covered with it.

6. This is a dangerous point since the nitration will takeplace as soon as the glycerin is added. The nitration

will produce heat, so the solution must be kept below 30degrees centigrade! If the solution should go above 30degrees, immediately dump the solution into the ice bath!This will insure that it does not go off in your face!

7. For hte first ten minutes of nitration, the mixtureshould be gently stirred. In a normal reaction thenitroglycerin will formas a layer on top of the acidsolution, while the sulferic acid will absorb the excesswater.

Page 80

8. After the nitration has taken place, and thenitroglycerin has formed on the top of the solution, theentire beaker should be transferred slowly and carefully

to another beaker of water.When this is done the nitroglycerin will settle at the

bottem so the other acids can be drained away.

9. After removing as much acid as posible without disturbingthe nitroglycerin, remove the nitroglycerin with aneyedropper and place it in a bicarbonate of soda (sodium

bicarbonate in case you didn't know) solution. The sodiumis an alkalai and will nuetralize much of the acid

remaining. This process should be repeated as much as

necesarry using blue litmus paper to check for thepresence of acid. The remaining acid only makes thenitroglycerin more unstable than it already is.

10. Finally! The final step is to remove the nitroglycerinfrom the bicarbonate. His is done with and eye- dropper,slowly and carefully. The usual test to see if nitrationhas been successful is to place one drop of thenitroglycerin on metal and ignite it. If it is true

nitroglycerin it will burn with a clear blue flame.


23/79

** Caution **nitro is very sensative to decomposition, heating dropping, orjarring, and may explode if left undisturbed and cool.

Page 81

+++++++++++++++++++++++++++++++++++++

Demoltion Article #2By: King Arthur

I have decided to skip the article on mercury fluminate fora while and get right into the dynamite article.

Dynamite is nothing more than just nitroglycerin and astablizing agent to make it much safer to use. For the sake ofsaving time, I will abbreviate nitroglycerin with a plain NG.The numbers are percentages, be sure to mix these carefully andbe sure to use the exact amounts. These percentages are inweight ratio, not volume.------ ------no. ingredients amount---------------------------------------

#1 NG 32sodium nitrate 28woodmeal 10ammonium oxalate 29 {Note: Use NG From the

chapter on how to build it.}guncotten 1


24/79

woodmeal 9 only slightly difficult.ammonium oxalate 2

#3 NG 35.5potassium nitrate 44.5woodmeal 6guncotton 2.5vaseline 5.5powdered charcoal 6

#4 NG 25potassium nitrate 26woodmeal 34barium nitrate 5starch 10

#5 NG 57potassium nitrate 19woodmeal 9ammonium oxalate 12guncotton 3

Page 82

#6 NG 18sodium nitrate 70woodmeal 5.5potassium chloride 4.5chalk 2

#7 NG 26woodmeal 40barium nitrate 32sodium carbonate 2

#8 NG 44

woodmeal 12anhydrous sodium sulfate 44

#9 NG 24potassium nitrate 32.5woodmeal 33.5ammonium oxalate 10

#10 NG 26potassium nitrate 33woodmeal 41

#11 NG 15

sodium nitrate 62.9woodmeal 21.2sodium carbonate .9

#12 NG 35sodium nitrate 27woodmeal 10ammonium oxalate 1

#13 NG 32


25/79

potassium nitrate 27woodmeal 10ammonium oxalate 30guncotton 1

#14 NG 33woodmeal 10.3ammonium oxalate 29guncotton .7potassium perchloride 27

#15 NG 40sodium nitrate 45woodmeal 15

Page 83

#16 NG 47starch 50guncotton 3

#17 NG 30sodium nitrate 22.3woodmeal 40.5potassium chloride 7.2

#18 NG 50sodium nitrate 32.6woodmeal 17ammonium oxalate .4

#19 NG 23potassium nitrate 27.5woodmeal 37

ammonium oxalate 8barium nitrate 4calcium carbonate .5


26/79

Page 84

HouseHold Chemicals

Household equivalants for chemicles

It has come to my attention that m any of these chemiclesare sold under brand names, or have household equivalants. hereis a list that might help you out.

acetic acid vinegaraluminum oxide alumiaaluminum potassium sulfate alum

aluminum sulfate alumammonium hydroxide ammoniacarbon carbonate chalkcalcium hypochloride bleaching powdercalcium oxide limecalcium sulfate plaster of pariscarbonic acid seltzercarbon tetrachloride cleaning fluidethylene dichloride Dutch fluidferric oxide iron rust _Just buy graphite at theglucose corn syrup /Hardware store, it's usedgraphite pencil lead/ to lube locks and such.hydrochloric acid muriatic acid_ Extremely diluted

hydrogen peroxide peroxide \_/lead acetate sugar of leadlead tetrooxide red leadmagnesium silicate talcmagnesium sulfate Epsom saltsnaphthalene mothballsphenol carbolic acidpotassium bicarbonate cream of tartarpotassium chromium sulf. chrome alumpotassium nitrate saltpetersodium dioxide sandsodium bicarbonate baking sodasodium borate borax

sodium carbonate washing sodasodium chloride saltsodium hydroxide lyesodium silicate water glasssodium sulfate glauber's saltsodium thiosulfate photographer's hyposulferic acid battery acidsucrose cane sugarzinc chloride tinner's fluid


27/79

Page 85

Keep this list handy at all times. If you can't seem to getone or more of the ingredients try another one. If you stillcan't, you can always buy sm all amounts from your school, ormaybe from various chemical companies. When you do that, be sureto say as little as possible, if during the school year, and theyask, say it's for a experement for school.

Page 86


28/79

Misc. CompoundsBy: The Prowler

Mace Substitute 3 PARTS: Alchohol

1/2 PARTS: Iodine1/2 PARTS: Salt

Or:

3 PARTS: Alchohol1 PARTS: Iodized Salt (Mortons)

It's not actual mace, but it does a damn good job on the eyes...

CO2 Canister Bomb

Take a Co2 canister and cut the top almost off but leave a

little to form a hinge. Let out the Co2 and insert a M80 into it.Insert fuse throught hole in top. Close the top by welding orepoxy glue. When ready to ignite just light... Pretty neat eh?

Unstable Explosives

Mix solid Nitric Iodine with househould ammonia. Wait overnightand then pour off the liquid. You will be left with a muddysubstance. Let this dry till it hardens. Now throw it atsomething!!!!

Jug Bomb

Take a glass jug, and put 3 to 4 drops of gasoline into it.Then put the cap on, and swish the gas around so the innersurface of the jug is coated. Then add a few drops of potassiumpermanganate solution into it and cap it. To blow it up, eitherthrow it at something, or roll it at something.

Page 87

Hindenberg Bomb

Needed:


29/79

1 Balloon1 Bottle1 Liquid Plumr1 Piece Aluminum Foil1 Length Fuse

Fill the bottle 3/4 full with Liquid Plumr and add a littlepiece of aluminum foil to it. Put the balloon over the neck ofthe bottle until the balloon is full of the resulting gas. Thisis highly flammable hydrogen. Now tie the baloon. Now light thefuse, and let it rise.When the fuse contacts the balloon, watch out!!!

{Bullshit, it's nothing. Try something better, use betterchemicals etc. You can make some nice stuff with gases.}

Page 88

How to Build Black PowderBy: Mr. Byte-Zap

Black powder can be prepared in a simple, safe manner. Itmay be used as blasting or gun powder.


30/79

Material required: Quantity:----------------- --------

potassium nitrate --- granulated --------- 3 cupswood charcoal --------- powdered --------- 2 cupssulfur ---------------- powdered --------- 1/2 cupalcohol - (whiskey, rubbing alcohol) ----- 5 pintsWater ------------------------------------ 3 cupsheat source2 buckets -- each 2 gallon capacity, at least one of which is

heat resistant (metal, ceramic, etc.) Flatwindow screening ------- at least 1 ft. Squarelarge wooden stickcloth ----------------------- at least 2 ft. Square

note: the above amounts will yield 2 ounds of black powder.

However, only the ratios of the amounts of the ingredientsare important.

Thus, for twice as much black powder, double all quantitiesused.

Procedure:---------

1) place alcohol in one of the buckets

2) place potassium nitrate, charcoal, and sulfur in the heatresistant bucket. Add 1 cup water and mix thoroughly with woodenstick until all ingredients are dissolved.

3) Add remaining water (2 cups) to mixture. Place bucket on heatsource and stir until small bubbles begin to form.

Caution: do not boil mixture. Be sure all mixture stays wet.If any is dry, as on sides of pan, it may ignite.

4) Remove bucket from heat and pour mixture into alcohol whilestirring vigorously

Page 89

5) let alcohol stand about 5 minutes. Strain mixture throughcloth to obtain black powder. Discard liquid. Wrap clotharound black powder and squeeze to remove all excess liquid.

6) Place screening over dry bucket. Place workable amount of damppowder on screen and granulate by rubbing solid through screen

note: if granulated particles appear to stick together and changeshape, recombine entire batch of powder and repeat steps 5

& 6.

7) Spread granulated powder on flat dry surface so that layerabout 1/2 inch is formed. Allow to dry. Use radiator , ordirect sunlight. This should be dried as soon as possible,preferably in one hour. The longer the drying period, theless effective the black powder.


31/79

Caution: remove from heat as soon as granules are dry. Blackpowder is now ready for use.

Page 90

Fire Bombs, Napalm etc.

By: Lex Luthor

FIREBOMBS

Most fire bombs are simply gasoline filled bottles with a fuel

soaked rag in the mouth (the bottle's mouth, not yours). Theoriginal Molotov cocktail, and still about the best, was amixture of one part gasoline and one part motor oil. The oilhelps it to cling to what it splatters on.

Some use one part roofing tar and one part gasoline. Firebombs have been found whcih were made by pouring melted wax intogasoline.


32/79

NAPALM

About the best fire bomb is napalm. It has a thickconsistancy, like jam and is best for use on vehilces orbuildings.

Napalms is simply one part gasoline and one part soap. Thesoap is either soap flakes or shredded bar soap. Detergents won'tdo.The gasoline must be heated in order for the soap to melt. Theusual way is with a double boiler where the top part has at leasta two-quart capicity. The water in the bottom part is brought toa boil and the double boiler is taken from the stove and carriedto where there is no flame.

Then one part, by volume, of gasoline is put in the top partand allowed to heat as much as it will and the soap is added andthe mess is stirred until it thickens. A better way to heatgasoline is to fill a bathtub with water as hot as you can getit. It will hold its heat longer and permit a much largercontainer than will the double boiler.

NOTE: Anyone who lives after trying this, drop me a note, I wantto shake your hand.

Page 91

MATCH HEAD BOMB

Simple safety match heads in a pipe, capped at both ends, makea devestating bomb. It is set off with a regular fuse

A plastic Baggie is put into the pipe before the heads go into prevent detonation by contact with the metal.

Cutting enough match heads to fill the pipe can be tediouswork for one but an evening's fun for the family if you can dragthem away from the TV.

FUSE IGNITION FIRE BOMB

A four strand homemade fuse is used for this. It burns likefury. It is held down and concealed by a strip of bent tin cutfrom a can. The exposed end of the fuse is dipped into the flareigniter. To use this one, you light the fuse and hold the firebomb until the fuse has burned out of sight under the tin. Thenthrow it and when it breaks, the burning fuse will ignite thecontents.

WHAT!?!?


33/79

Page 92

How to Make NitroglycerinBy: Karl Marx

CH2ONO2! 3/2 N2 + 3 CO2CHONO2 ----------> +! Ignition 5/2 H2O + 1/4 O2

CH2ONO2

(How Nitro explodes--note that the byproducts are nothing butnitrogen, carbon dioxide, water and oxygen)

Nitroglycerin [heretofore Nitro] is a very powerful high-explosive. I am not sure who invented it but he probablydidn't-- the first person to make it probably blew himself up andhis freind got the info off his notes. Well anyway, the next bestthing to Nitro is TNT which is ten times harder to make but alsoten times safer to make. If you can't use common sense then donteven TRY to make this stuff--a few drops can be lethal undercertain circumstances.

To make Nitro:== ==== ======

Mix 100 parts fuming nitric acid (for best results it shouldhave a specific gravity of 50 degrees Baume') with 200 partssulphuric acid. This is going to be HOT at first--it won'tsplatter if you pour the nitric INTO the sulphuric but don't tryit the other way around.The acid solutions together can disolve flesh in a matter of


34/79

seconds so take the proper measures for God's sake!!! When cool,add 38 parts glycerine as slowly as possible. Let it trickle downthe sides of the container into the acids or it won't mixthourily and the reaction could go to fast--which causes enoughheat to ignite the stuff. Stir with a **GLASS** rod for 15seconds or so then CARFULLY pour it into 20 times it's *VOLUME*of water. It will visibly precipitate immediatly. there will betwice as much Nitro as you used glycerin and it is easy toseparate. Mix it with baking soda as soon as you have separatedit-- this helps it not to go off spontainously.

Page 93

::::::::::::::::::::::::::::::::::::::

NOTES: Parts are by weight and the Baume' scale of spicificgravity can be found in most chem. books. You ca get fumingnitric and sulfuric acids wherever good chemicals or fertilizersare sold. It is positivly *STUPID* to make more than 200 gramsof Nitro at a time.When mixing the stuff wear goggles, gloves, etc. When I firstmade the stuff I had the honor of having it go off by itself (Iadded too much glycerine at a time.) I was across the room atthe time, but I felt the impact--so did the table it was on aswell as the window it was next to--they were both smashed by only25 grams in an open bowl.Oh, yes, glycerine you can get at any pharmacy and you need anadult signature for the acids. Any bump can make Nitro go off if

you don't add the bicarbonate of (baking) soda--but even withthat, if it gets old I wouldn't play catch with it.

Once you have made the Nitro and saturated it with Bicarb.you can make a really powerful explosive that won't go off byitself by simply mixing it with as much cotton as you can andthen saturating that with molten ((parifine--just enough to makeit sealed and hard.Typically, use the same amounts (by weight) of each Nitro, cottonand parifine. This, when wrapped in newspaper, was once known as"Norbin & Ohlsson's Patent Dynamite," but that was back in 1896.


35/79

Page 94

I Zoxxon take no responsibility for the use of these items statedherewithin. This textfile is presented for informational useonly. The comments are added to most of the things i haveattempted. All of the origional authors names have been deletedfor privacy. All telephone numbers have been deleted also inorder to preserve secrecy.

Some articles are from the ill-fated,"THE POLICE STATION" BBS

Homemade Bombs (Just the way Mom used to make 'em)Explosive Devices An anarchist's beginning guide to explosives!(or how to get back at those neighbors who told you to turn yourstereo down by blowing em up!)

1.Quickie... Take organic pool chlorine and mix it withvegetable shortening and put it someplace you don't like. Itreacts by itself to produce a very noxious white smoke and heat.

*make sure you are not around because the fumes are harmful toyour health.

2.A pipe bomb (dangerous) Take a pipe, crimp (closed at oneend) and pack it 3/4 full of paraffin (or any other semi-solidwith about the same basic chemical structure), poke a number ofholes through the length of the paraffin. On top of this put avery thin steel (or other metal of that sort) wafer, make doubledamn sure** that it fits tightly all the way around. On top ofthis put some high concentration HCL (or similar acid). Close thetop now, stand it on end (paraffin end down), and get the fuckaway. You should have about 2-5 minutes depending on thethickness of the wafer. Watch out for shrapnel.

*sure you will..more like 5-30 seconds. better to use a vial onthe bottom ,stand the pipe upright, tie a string around it andpull from far away.

3. Snowball... Take ammonium iodide, flour, & water and formthis into a snowball. Leave this 'snowball' somewhere where itwill do neat stuff when it dries out. (substituting somemagnesium flash powder for some (not all) of that flour helpsthings a bit.)


36/79

Page 95

4.Fire bomb.. Take carbon disulfide and dissolve whitephosphorous in it. Put it in a stoppered bottle and throw it atsomething you would like to see on fire. When the CS2 evaporates,it leaves a film of P on what ever it hits, and it starts a firewith the solvent vapors.

5. Light bulb bomb (click...booom!) Take a light bulb (brassbased preferably so you can solder the wires back when you aredone) Unsolder the two wires that are soldered to the brass (one

at the center of the base and one on the edge). Remove the base,taking care not to damage the bulb or filament, then take a pairof needle nosed pliers and snap the glass nipple that is nowexposed. Fill bulb (not completely),via the hole you just made,with gasoline. Plug hole with silicone or something. Put the baseback on, resolder the wires, screw into light fixture (with poweroff of course!), turn on light...booom! *easier to use amini-power-drill.

EXPLOSIVE INFOWHEN PETROLEUM JELLY AND POTASSIUM CHLORATE ARE MIXED IN A

ONE TO ONE RATIO BY WEIGHT, IT MAKES A TOTALLY SAFE WET COMPOUNDBUT WHEN DRIED IT BECOMES HIGHLY EXPLOSIVE AND SHOCK SENSITIVE.*store in oil.

MIX 3 GRAMS OF POTASSIUM IODIDE AND 5 GRAMS OF IODINE IN ABEAKER WITH 50 ML OF WATER. THEN ADD 20 ML OF AMMONIUM HYDROXIDE[AMMONIA WATER 10%]. FILTER THIS SUBSTANCE AND THE RESULTINGSOLID IS CALLED NITROGEN TRIIODIDE. WHEN THIS IS WET IT ISSAFE,BUT WHEN DRY BECOMES VERY EXPLOSIVE AND SHOCK SENSITIVE. *afeather will set it off!!

Page 96


37/79

Common Rocket Fuel------------------

Materials:1.) Potassium Nitrate (KNO3) or "Saltpeter".2.) Sugar (Powdered is the best)

Procedure:1.) Mix the two together 1/2 Nitrate and 1/2 Sugar2.) Take an old cooking pan, and melt the two together. There

is NO way for it to ignite.(*BULLSHIT!)3.) It should turn into a fudgey looking compound. Pour this

compound into a rocket engine such as a cardboard tube, and set afuse into the compound and let the compound harden.* it is easier to use dry mixed.(Good for smoke also)

Chlorate Mixtures-----------------NOTE: The main ingredient for this experiment is potassium or

sodium chlorate. Both of these will do equally well.However,both may prove difficult to find. Probably the only wayto get it would be to order it through a chemical supply house.

Materials:----------1) Potassium chlorate or sodium chlorate.2) Powdered charcoal3) Powdered aluminum4) Sulfur

Procedure:----------

NOTE: There is no set procedure for making chlorate mixtures.The only special thing ABOUT chlorate mixtures is that they havea chlorate in them. Experiment with diffiernt proportions of eachof the ingredients.All of the chlorate mixtures I made had no set

procedure and I just experimented with the proportions of each ofthe ingredients. Most of your mixture, however, should bepotassium chlorate or sodium chlorate.

1) Make sure that you mix the sulfur and charcoal and aluminumfirst. You may grind these in a mortar and pestal to get a goodmix of these ingredients.2) Add potassium chlorate or sodium chlorate. Mix them VERY

CAREFULLY in the mortar and pestal. DO NOT GRIND the mixture oncethe chlorate has been added or it will ignite and burn the shitout of you.3) You now may use the mixture for whatever you want to.

Chlorate mixtures are some of the best compositions there are

and, in my experiences, they are the best except for model rocketpropellant (procedure for making this is given later).Page 97

' Green Goddess '-----------------


38/79

Materials---------1.) Zinc (Zn)


39/79

aluminum foilNow, just cut a piece out of the paper bag about the size of

your can. Roll it up cigar-style and tape the very ends to keepit in the same shape. Now, take you're missile, and stick about3/4ths of it in a pool of gasoline, and let it soak up a littlewhile. Now, on the upper limit of where the gas hit (the gas-lineI suppose you could call it) rip a small piece almost completelyoff, and bend it out. That is your fuse. Ok, now put aluminumfoil on the top. The amount of foil that you put on determinesthe range of the missile. The more the shorter...Makes it easierto aim..Now you're ready. Put the missile in the hole in the gas can, sothat the fuse is light-able, and light it. Stand back, it makes abit of noise... For sum real phun, put a bit of impact explosivein the nose...*how that one works i have no idea..mine just burnt up...

This is really easy. Just get a few bottles of rubber cementand pour a line of it up to a wall and up the wall. Then, lightit and watch! Great phun.


40/79

This one is effective, and any fool can do it. Remove the topair filter. That's it!

Or a oldie but goodie: sugar in the gas tank.

Stuff rags soaked in gas up the exhaust pipe. Then you wonderwhy your "friend" has trouble with his/her lungs. Here's one thattakes time and many friends. Take his/her car apart then breakinto thier house and reassemble it, in their living or bedroom.Phun eh?

If you're into engines, say eeni mine moe and point tosomething and remove it. They wonder why something doesn't work.

Page 100

Pool Phun---------First of all, you need know nothing about pools. The only

thing you need to know is what a pool filter looks like.Second, dress casual. Preferably, in black. Visit your

"friends" house, the one whose pool looks like fun!!) Then youreverse the polarity polarity of his/her pool, by switching the

wires around. They are located in the back of the pump. This willhave quite an effect when the pump goes on. In other words.Boooooooooooommm! Thats right, when you mix +wires with - plugs, and vice- versa, the 4th of july happensagain. Not into total destruction???When the pump is off, switch the pump to "backwash". Turn thepump on and get the phuck out! When you look the next day,phunny. The pool is dry.


41/79

If you want permanent damage, yet no great display like my firstone mentioned, shut the valves of the pool off. (There areusually 2) One that goes to the main drain and one that goes tothe filter in the pool.That should be enough to have one dead pump. The pump must takein water, so when there isn't any...

Practical jokes:

These next ones deal with true friends and there is *no*permanent damage done. If you have a pool, you must check thepool with chemicals. There is one labeled orthotolidine. Theother is labeled alkaline (ph). You want orthotolidine. (Itchecks the chlorine). Go to your local pool store and tell themyou're going into the pool business, and to sell you ortho-tolidine (a CL detector) Buy this in great quantities ifpossible. The solution is clear. You fill 2 baggies with thischemical. And sew the bags to the inside of your suit. Next, goswimming with your friend! Then open the bags and look likeyou're enjoying a piss. Anyone there will turn a deep red! Theywill be embarrassed so much, especially if they have guests

there! Explain what it is, then add vinegar to the pool. Only alittle. The "piss" will disappear.

Page 101

Ye Olde Moltov-Cocktail:

%


42/79

cocktails.Very Simple bomb. Just light and throw. There are manyvariations to this, which are in phile #2.

-Galin

{Special note.... I tried to get you his 'phile #2', but I havenot found it anywhere. Anyone who has it should contact me, oradd it to a copy, Just put it in the zip along with the rest ofthe file.}

Page 102

TheAnarchist's Micro Cookbook

by:MAELSTROM

(A Book of simple bombs for the average, and unscientific kid.)

Matchbomb:

Tin foil, matches (wooden or paper), fuse

Cut off the sulfur tops of the matches. Put them on the tinfoil. Pack tightly. Put the fuse into the middle of the bomb, andpack very tightly.

If not packed enough, you will only get a flame thrower.With 3000 match heads, you will get a six foot flame if notpacked enough. Otherwise it will explode, sending flames in everydirection.

Variations of the Matchbomb:

Ping-pong bomb:

Ping-pong ball, matches, fuse

Follow same directions as matchbomb, but put the match headsinto a ping-pong ball. (Put a hole in it with an awl.) Stuff inthe match heads. Then add the fuse.

Average ping-pong ball takes over 100 match heads. When lit,throw, will explode in air if packed tight, otherwise, only asmall meltdown will occur. A well packed ping-pong bomb will


43/79

explode sending a shower of flame and match heads for over 25 ft.The shell of the ping-pong ball will be set aflame and will meltto whatever it hits.

Jar bomb:

Babyfood jar, matches, fuse, cap

Ditto of matchbomb. Pack tight, etc. Put hole in top of capwith awl, and set in the fuse about 1/4 inch into the matchheads.

Normal size jar will hold over 2900 match heads. Pack themuntil they will not pack tighter. Light fuse and throw, or run.When matches catch, will blow the jar to shreads. Do not standtoo close, or you will get the shrapnel upside your head.

Page 103

Shellbomb:

Bullet, fuse, pliers, drill, hammer, nail

Remove the bullet from the live shell with the pliers. Pointaway from yourself, just in case you screw up too badly. Save thebullet for other bombs, etc. Pour the blackpowder onto a tabletop, paper cup, napkin, or other. Strike the back of the bulletshell with the nail and hammer to set it off. Now take the drilland drill a hole in the back of the shell. Refill with theblackpowder. Crimp end with pliers. Put fuse in hole. Light andthrow.

Explosion will shatter the shell, tearing it to pieces andsending shrapnel everywhere. Enjoy it, but do not get hit. thiswill ruin the fun.

Variation of Shellbomb:

Same as shell bomb, but leave the blackpowder in the shell,and just add the fuse to the open end, and then crimp a bit lesstightly.

Light and throw etc. Works basically the same way, just afaster version.

Simple bomb:

Balloon, blackpowder (1 lb), fuse, duct tape, BB's

Fill balloon with blackpowder. Put fuse into open end ofballoon. Wrap balloon tightly with duct tape. Put some BB's inbetween layers of duct tape. Do about 3 or 4 layers.

Light and enjoy. Do not stand too close: BB's fly fast andhard.

For any of these bombs, add some smokepowder from smokebombs to make it more noticable. Add some copper fillings, or


44/79

powder for a green flame, or magnesium ribbon for a blindingflash of white light.

Page 104

To finish off I will throw in the infamous Maltov-Cocktail.

Moltov-Cocktail:

Whiskey bottle, cap, tampon, copper wire, gasoline

Drink the whiskey first.Ok, now you can begin. Fill the bottle with gasoline, and

screw on its cap. next dip the tampon, yes, a tampon(or a cottonball for those of you who are wimps) in gasoline. Wrap the copper

wire around the neck of the whiskey bottle, securing the tamponin place. Light the tampon and throw.If the cap is on well, then you can hold it for as long as

necessary, the cocktail will not explode until the glassshatters.

Variation of Moltov-Cocktail:

Same as above, but fill the bottle with styrofoam afterdrinking the whiskey. Then fill with gasoline and proceed asplanned.

The styrofoam will melt when the bottle explodes, and will

remain molten for a few seconds before hardening again. This isextremely painful if it gets on you, and will usually cause thirddegree burns.

Can be used to take out wooden buildings or other substanceswhich require a long heating before combustion. The styrofoamwill burn for a while hot enough to ignite most wood structures.

Have a hell of a time, and remember, there's nothingwrong with what you are doing, 'til you get caught.

cc


45/79

Page 105

How to Hotwire a CarBy: The Marauder

The easiest way is to just get under the dashboard and startcrossing wires. Of course this could short out the entireelectrical system so there is a better way.

When you get in the car, look under the dash. If it's enclosedthen don't bother. Most new cars are like this unfortunately.However you could cut through the dash. If you do cut just do it

near the ignition.

Once you get behind or near the ignition, look for two redwires. In older cars this was the standard color code. If theyaren't there you'll just have to try whatever else you can find.

Pull out the two wires and cross them. The car should start.

Page 106


46/79

CARS AND LIGHTBULBS etc

You wanna fuck up someones car try putting a cup of sugar inthe gas tank or a raw egg. The sugar seizes the engine bigtime! Idunno what the egg does but once some dickless asshole put one inour gas tank and we had to get the tank removed to get it out. Itlooked like an Omelette..

Take the bottom of the light bulb off very carefully (*heat it

up with a blowtorch to expand it) and make sure you do notdestroy any wires...You should now have the metal part it onehand and the glass part in another. Put the metal one down. Fillbottom of bulb with gunpowder and then put water on top. whenputting the metal back in, be sure that the filament, the partthat lights up, touches both the water and the powder.When someone turns on the light...hahaha...

Also try the same thing, but stop at the part where you put inthe stuff...Buy a size A Rocket engine, and hook it up with the

igniter hooked to the wires on the filament...Point it down,andthey'll get a surprise when someone turns on the light!

Ok, like I saw the ol' light bulb bomb trick done in this coolmovie,'The Soldier'...The commie bad guy snuck into the CIAdirector's office,and took the glass part off the light bulb. Hefilled the glass part with gasoline (or some flammable stuff) andliquid soap to have the fire stick to the guy. He glued it backtogether, and when he turned on the light...

Page 107

Electronic TerrorismBy: King Tut


47/79

It starts when a big, dumb lummox rudely insults you. Beingof a rational, intelligent disposition, you wisely choose toavoid a (direct) confrontation. But as he laughs in your face,you smile inwardly---your revenge is already planned.

Step 1: follow your victim to his locker, car, or house. Onceyou have chosen your target site, lay low for a week ormore, letting your anger boil.

Step 2: in the mean time, assemble your versatile terroristkit(details below.)

Step 3: plant your kit at the desig- nated target site on amonday morning between the hours of 4:00 am and 6:00am. Include a calm, suggestive note that quietly hintsat the possibility of another attack. Do not write itby hand! An example of an effective note:

"don't be such a jerk, or the

next one will take off yourhand. Have a nice day."

Notice how the calm tone instills fear. As if written bya homicidal psychopath.

Step 5: choose a strategic location overlooking the target site.

Try to position yourself in such a way that you can seehis facial contortions.

Step 6: sit back and enjoy the fireworks!

Assembly of the versatile, economic, and effective terrorist kit

#1:

the parts you'll need are:1) 4 aa batteries2) 1 9-volt battery3) 1 spdt mini relay (radio shack)4) 1 rocket engine(smoke bomb or m-80)5) 1 solar ignitor (any hobby store)6) 1 9-volt battery connectorPage 108

step 1: take the 9-volt battery and wire it through the relay'scoil. This circuit should also include a pair ofcontacts that when separated cut off this circuit.These contacts should be held together by trapping thembetween the locker,mailbox, or car door. Once the dooris opened, the contacts fall apart and the 9-volt


48/79

circuit is broken, allowing the relay to fall to theclosed postion thus closing the ignition circuit. (Ifall this is confusing take a look at the schematic

below.)

Step 2: take the 4 aa batteries and wire them in succession.Wire the positive terminal of one to the negativeterminal of another, until all four are connected

except one positive terminal and one negative terminal.Even though the four aa batteries only combine to create6 volts, the increase in amperage is necessary to

activate the solar ignitor quickly and effectively.

Step 3: take the battery pack (made in step 2) and wire one endof it to the relay's single pole and the other end toone prong of the solar ignitor. Then wire the otherprong of the solar ignitor back to the open position onthe relay.

Step 4: using double sided carpet tape mount the kit in hislocker, mailbox, or car door. And last, insert the solar

ignitor into the rocket engine (smoke bomb or m-80).

Page 109

Your kit is now complete!

--------->


49/79

/ I(SWITCH) I I

I II II II --- (BATTERY)I - ( PACK )I ---I II I---- -----

I I*

(SOLAR IGNITOR)

Page 110

Harmless TerrorBy: The Prowler

To all those who do not wish to inflict bodily damage on theirvictems but only terror.

These are weapons that should be used from high places.

1) The flour bomb.Take a wet paper towel and pour a given amount of baking flour

in the center. Then wrap it up and put on a rubber band tokeep it together. When thrown it will fly well but when ithits, it covers the victim with the flower or causes a bigpuff of flour which will put the victim in terror since as faras they are concerned, some strange white powder is all overthem. This is a cheap method of terror and for only the costof a roll of paper towels and a bag of flour you and yourfriends can have loads of fun watching people flee in panic.


50/79

2) Smoke bomb projectile.All you need is a bunch of those little round smoke bombs anda wrist rocket or any sling-shot. Shoot the smoke bombs and

watch the terror since they think it will blow up!

3) Rotten eggs (good ones)take some eggs and get a sharp needle and poke a small hole inthe top of each one. Then let them sit in a warm place for

about a week. Then you've got a bunch of rotten eggs that willonly smell when they hit.

4) Glow in the dark terror.Take one of those tubes of glow in the dark stuff and pour thestuff on whatever you want to throw and when it gets on the

victim, they think it's some deadly chemical or a radioactivesubstance so they run in total panic. This works especiallywell with flower bombs since a gummy, glowing substance gets

all over the victim.

Page 111

5) Fizzling panic.Take a baggie of a water-baking soda solution and seal it.

(Make sure there is no air in it since the solution will form agas and you don't want it to pop on you.) Then put it in a biggerplastic bag and fill it with vinegar and seal it. When thrown,the two substances will mix and cause a violently bubblingsubstance to go all over the victim.


51/79

Page 112

Carding-------

First of all, for those of you who do not know exactly whatcarding is, well, it is the illegal use of credit cards for thepurchase of items using them. This can be very useful.Especially when you are out of work such as I am. This file isof course not for the professional carder, but for the beginnerwho does not know how to obtain or use a credit card to his/heradvantage.

Ok, the first thing you have to do is obtain a card from

somewhere. The best way is to go to your local supermarket orany store that uses credit cards. Then, you watch them take outthe trash. After they have taken the trash out then you go overwhen the coast is clear and search through their trash. I knowthat it can get messy, but don't conplain, jut think of the nicethings that you will be able to get out of it in the future. Youare looking for carbons that they run te cards through. Then, youtake those home and write down the name, card number, and theexperation date and the type of card that it is (Mastercharge,Visa, American Express, etc.) You make sure that you have cardswith a good date on it. Next comes the good part, the ordering.All you do when orderin is that you call up a mail-orderand then you tell them what you want and your card number, and

then they will ask for the place to send it to. Here comes thehardest part. Here are some of your options of places to sendit.

1) To a vacant house, apartment.2) To a friend that will deny it ever arived when they

inquire about it3) To someones housee that you do not know.

Let us examine these options in detail.


52/79

1) Sending to a vacant house or apartment. This is done bygiving the address of the vacant house/apartment. Them, when itarives UPS and the mail man will leave it on the front porch orbushes. Then you just go by the house and pick it up. You musttake into account tat the possibility that someone may move intothe house/apartment.

2) Sending to a friend and having him deny that it arived. Youabribe your friend to pick up the packages when they arive athis/her house and then he gives them to you. Then, when the fuzzcomes along to grab the guy eho it got sent to your friend (andparents who never saw him get it or it come) will deny it. Andthe fuzz won't mess with them any more.

They will axamine the other possibilitys.

Page 113

3) Ok, you find some nice older people that don't know you andthat you do not live around. Then, you order the stuff you wantand send it to that house. You call the people and make up anoriganal story of how they got the wrong address and they alreadysent it and ask to pick it up when it arrives. Make sure not togive them your real name, address, phone number, etc....

And the other way of obtaining a credit card is to get it from aElite board. This is not the best way, since this way the cardis usually overdrawn by the time you get it. Anothr way to cardand my favorite is to use the T.R.W. credit information system.This is only if you have a good password, if you do not or do nothave a file explaining it do not call it. IF you make mistakes

they do trace !Here is a number for T.R.W. /--Why not use the Blue Boxing

[408] 280-1901


53/79

illegal uses. Merely to inform such as Newsweek informs oncocaine, but does not condon it's use.=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=ABOVE DISCLAIMER IS A LOAD OF BULLSHIT!


54/79

following info from CBI:

Page 115

Credit card #Name of bankSocial Security #AddressFULL name

After you get that information from CBI, it is neccessary to callinformation and get the persons REAL phone #. This will NOT beused, but you'll need it just in case, I'll explain later.

2........Setting up

The setup part is fairly easy, and this involves a slight changefrom past methods of carding. As a 'Phone number you can be

reached at', You must provide a Direct Dial VMB. So a Direct DialVMB which will pick up with YOUR greeting is a must. This willimpersonate a home answering machine.Change the greetin to "Hello, I can not answer your call...."etc.

Last of all, Have ALL information ACCESSABLE and EASY to find.

Tips:

- Run the card through a CC Checker for $1 if you got theCC from CBI.

Example: 800-554-2265 Bank : 1067 #Merchant: 52 #Type : 10 # (MC) 20 # (Visa)Amount : 100# ($1.00)Exp.date: 0193 (1/93, make it

up,the exp.date is NEVERchecked)

- DON'T use American Express, they always call the owner'snumber EVEN if you tell them your not at home!

3........Ordering

This is when you actually PLACE the call. You MUST stay calm andrelax. Tell them what you want to order, the key is to pretendlike the person with the card is YOU. Play actor, ASK aboutprices FIRST, and DON'T overdo it from one place. Example: Justorder a loaded 486 with a 200 Mb hard drive, DON'T go and say"Yeah, can I have a gig on that?"Page 116


55/79

Then, just order!

When it comes to credit card time, remember these:

- Do NOT order it OVERNIGHT, Send it 3rd day or something, Iused the same VMB for 2 months before the police got around toshutting it down. Overnight delivery is a flag for them now.

- If they ask for "the number on the back of the card" or "Theissuing bank" (If CBI didn't give you the issuing bank, or youdidn't know what the initials were)

say: "Well, I'm not looking at my card right now." If you needto, use phrases like:

"My card is in my wallet in the car, I REALLY don't havetime to go dig it out right now. IS THIS GOING TO BE A PROBLEM!?"

They HATE that phrase and I usually get a turnaround of80% saying, no sir, never mind. The Key is, ACT LIKE YOU HAVEA DATE IN 25 MINUTES DOWNTOWN, in other words, act rushedand pissed off. MOST BUSINESSMEN ARE, Don't kiss their assesbecause businessmen don't!!

- Your VMB is your ANSWERING MACHINE, if they catch thedifference in area code of VMB and Billing address, tell them itsyour summer house or relatives house, but DON'T BRING IT UP.

- If they ask for # at Billing address, give them the REAL #,they will check with Information only, but be sure to emphasize

that the number you gave them for the billing address is NOT thenumber your at! Make SURE you say you can be contacted at the VMBnumber for the next week or so.

- If they tell you they can't ship to a different address thanthe billing address, stand FIRM, say "Is there ANY way I canchange this? Can you call my bank or something?!!?" SoundANNOYED, DON'T give up and in about 40% of my calls, the personchanged their mind.

- Do NOT check your VMB every 10 minutes, that looks weird.

- DO NOT even TRY to get HST's, those are flagged UP the BUTT,

and I'd GUESS that soundblasters will be soon.

Page 117

- Tell them you NEED the stuff delivered on X day, and INSIST,


56/79

KEEP insisting! Make SURE. Tell them, "I need to do work onXX and I want the machine then"

- If you are sending a LOT of machines etc. to ONE drop, Makethe package ATTENIONED to John Smith or whoever, have ALL thepackages addressed to the same person. Tell them your sendin itto a business associate, relative, wife, whatever. We don't needthe stuff flagged down at Fed Ex.

The key phrase is "I really don't have time for this"

And remember: YOUR the CUSTOMER, they don't know you AREN'T thecard holder, for christ sake, ACT LIKE IT!! DON'T take secondrate service!!

4........Drops

The drop is very important nowadays, you can NOT just leave anote, so don't even bother.

4 methode

1. Vacant House Method

Put blankets up on windows in house and sit in and sign forpackages. This method, works, and there are no future problems.FUTURE problems, they MAY not beleive you live there etc. so thismethod is a BIT risky

2. Freind's house - Robbed method

Tell a freind to sign at HIS house, then call the police at6.00pm and say "I JUST came home and my door was ajar and somelights were on, I Don't think anything was stolen, but whatshould I do?"

Make sure ALL stuff is cleared out and its safer if the persondoesn't even have a computer. When the police come by askingabout packages on X day, bring up your break in. To be safer,send something one day late and refuse to sign for it and bringit up to the police.

Page 118

3. Freind's house - Vacant method

Sign for the stuff at a freind's house, GET IT OUT, and when thepolice come say " I was on vacation for 3 weeks, I don't knowANYTHING about packages" There's NOTHING they can do, and yourset.

The advantages to the last 2 methods are:


57/79

You won't get bored if nothing comesYou won't get caught breaking & EnteringYou won't get caught by Fed ex guy and not get stuff

I have done #2 AND #3 with success, so it CAN be done.

Extra tip: Try US Mail, they haven't caught on yet to the dropdeal!

Have fun and don't get caught!- -

RL

Page 119

%%:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::%%%% Coin Changer Fraud %%%% Written by- Electronic Rebel %%%%:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::%%%%Lost City of Atlantis........215-844-8836 300/12/24 35 Meg%%%%Infinity's Edge..............805-683-2725 300/1200 10 Meg%%%%:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::%%

Have you ever seen one of those really big changer machines inairports, laundrymats or arcades that dispense change when youput in your 1 or 5 dollar bill? Well then, here is an articlefor you.1) Find the type of change machine that you slide in your billlength wise, not the type where you put the bill in a tray andthen slide they tray in!!!2) After finding the right machine, get a $1 or $5 bill. Start


58/79

crumpling up into a ball. Then smooth out the bill, now itshould have a very wrinkly surface.3) Now the hard part. You must tear a notch in the bill on theleft side about 1/2 inch below the little 1 dollar symbol (SeeFigure).4) If you have done all of this right then take the bill and goout the machine. Put the bill in the machine and wait. Whatshould happen is: when you put your bill in the machine itthinks everything is fine. When it gets to the part of the billwith the notch cut out, the machine will reject the billand (if you have done it right) give you the change at the sametime!!! So, you end up getting your bill back, plus the change!!It might take a little practice, but once you get the hang of it,you can get a lot of money!

!--------------------------------!! !! (1) /-------\ (1) !! ! ! !! ! Pic. ! !! (1) /\ \-------/ (1) !! !! !!-----/ \-----------------------!

\-------Make notch here. About 1/2 "down from (1)

P.S. Sorry for the "text work" but you should be able to geta good idea. If not, I can be reached on Infinity's Edge bbs.Have fun!

Call The Works BBS-1600+Textfiles!-[914]/238-8195-300/1200Always Open

Page 120

Free Postage!!By: TAP Magazine

The increasing cost of postage to mail letters and packagesis bringing down our standard of living. To remedy thisdeplorable situation, some counter control measures can be

applied.For example, if the stamps on a letter are coated with

Elmer's Glue by the sender, the cancellation mark will notdestroy the stamp:

the Elmer/s drives to form an almost invisible coating thatprotects the stamps from the cancellation ink. Later, thereceiver of the letter can remove the cancellation mark withwater and reuse the stamps. Furthermore, ecological saving willalso result from recycling the stamps. Help save a tree.


59/79

The glue is most efficently applied with a brush with stiff,short bristles. Just dip the brush directly into the glue andspread it on evenly, covering the entire surface of the stamp.It will dry in about 15 minutes.

For mailing packages, just follow the same procedure asoutlined above; however, the package should be weighed andchecked to make sure that it has the correct amount of postage onit before it is taken tothe Post Office.

Removing the cancellation and the glue from the stamps canbe easily accomplished by soaking the stamps in warm water untilthey float free from the paper. The stamps can then be put ontoa paper towel to dry. Processing stamps in large batches savestime too. Also, it may be helpful to write the word 'Elmer' atthe top of the letter (not on the envelope) to cue the receivingparty in that the stamps have been protected with the glue.

We all know that mailing packages can be expensive. And wealso know that the handicapped are sometimes discriminated

against in jobs. The Government, being the generous people theyare, have given the blind free postal service.

Page 121

Simply address you envelope as usual, and make onemodification. In the corner where the stamp would go, write in(or stamp) the words 'FREE MATTER FOR THE BLIND". Then drop youpackage or letter in one of the blue fedral mailboxes.

DO NOT TAKE THE LETTER TO THE POST OFFICE, OR LEAVE IT IN YOURMAILBOX.

Sounds very nice of the government to do this, right? Well,they aren't that nice. The parcel is sent library rate, that isbelow third class. It may take four to five days to send aletter to just the next town.

This too is quite simple, but less effective. Put theaddress that you are sending the letter to as the return address.

If you were sending a $20 donation to the pirate's Chest, you

would put our address (po box 644, lincoln ma. 01773) as thereturn address.

Then you would have to be carless and forget to put thestamp on the envelope. A nice touch is to put a bullshit addressin the center of the envelope.

Again, you MUST drop the letter in a FEDRAL mailbox. If thepost office doesn't send the letter to the return address forhaving no stamp, they will send it back for the reason of "No


60/79

such address".

Example--

Pirates ChestP.O. Box 644Lincol, Ma.01773

Tom Bullshit20 Fake RoadWhat Ever, XX99851

One last thing you might try doing is soaking a cancelledstamp off of an envelope, and gluing it onto one you are sending.

Then burn the stamp, leaveing a little bit to show that there wasone there.

Page 122

Displaying HBO.DOC:

///PAY TV DECODER PLANS///

MATERIALS REQUIRED:

1 - Radio Shack mini-box ( #270-235)1 - 1/4 watt resistor, 2.2k-2.4k ohm (RS #271-1325)1 - 75pf-100pf variable capacitor (Hard to find)2 - F61a chassis-type coaxial connectors (RS #278-212)12" - No. 12 solid copper wire

12" - RG59 coaxial cable

///INSTRUCTIONS///

1. Bare a length of No. 12 gauge solid copper wire and twistaround a 3/8" nail or rod to form a coil of 9 turns. Elongatecoil to a length of 1 1/2" inches and form right angle bends oneach end.2. Solder the varible capacitor to the coil. It doesn't matterwhere you solder it, it still does the same job. The best place

for it is in the center with the adjustment screw facing upwardNote: When it comes time to place coil in box, the coil must beinsulated from grounding. This can be done by crazy-glueing apiece of rubber to the bottom of the box, and securing the coilto it.3. Tap coil at points 2 1/2 turns from ends of coil and solderto coaxial chassis connectors, bringing tap leads through holesin chassis box. Use as little wire as possible.


61/79

4. Solder resistor to center of coil and ground other end ofresistor to chassis box, using solder lug and small screw.5. Drill a 1/2" diameter hold in mini-box cover to permitadjustment of the variable capacitor from the outside. Inspectthe device for defects in workmanship and place cover onmini-box. Tighten securely.6. Place device in line with existing cable on either side ofthe coverter box and connect to television set with the shortpiece of RG59 coaxial cable. Set television set to HBO channel.7. Using a plastic screwdriver (non-metalic) adjust the variblecapacitor until picture tunes in. Sit back, relax, and enjoy!!!

Page 123

Press S to Stop, P to Pause.

With most of the cable companies scrambling their signals on

most all new and some old channels I thought I'd update andrevise my first version (1.0) of Pay Tv Decoder Plans.Due to different scrambling systems, you might find it

neccesary to change the range and values of the variablecapacitator. I've also added a wiring diagram to help you withdesigning the circut. If you have any questions just leavea message on the board listed at the end of the article.

(Tom) Hackerman

///PAY TV DECODER PLANS///Version 2.0

///MATERIALS REQUIRED:///

1 - Radio Shack mini-box ( #270-235)1 - 1/4 watt resistor, 2.2k-2.4k ohm (RS #271-1325)1 - 75pf-100pf variable capacitor (Very hard to find)2 - F61a chassis-type coaxia

Documents

Darkstorm's Book of Anarchy 2